sync with code

71 files changed, 12255 insertions, 7565 deletions

diff --git a/perl-install/install/help/po/DrakX-help.pot b/perl-install/install/help/po/DrakX-help.pot
index 3b1f3f647..a06e6d296 100644
--- a/perl-install/install/help/po/DrakX-help.pot
+++ b/perl-install/install/help/po/DrakX-help.pot
@@ -8,12 +8,12 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
 #: ../help.pm:14
@@ -68,6 +68,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr ""
 
@@ -137,8 +147,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -234,16 +243,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr ""
 
-#: ../help.pm:186
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -281,7 +281,12 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, c-format
 msgid "Automatic time synchronization"
 msgstr ""
@@ -471,7 +476,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr ""
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr ""
@@ -519,7 +529,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr ""
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -658,12 +683,37 @@ msgid ""
 "emergency boot situations."
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr ""
@@ -808,7 +858,12 @@ msgstr ""
 msgid "Espanol"
 msgstr ""
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -862,53 +917,7 @@ msgid ""
 "Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
-#: ../help.pm:691
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: ../help.pm:725
-#, c-format
-msgid "authentication"
-msgstr ""
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -963,7 +972,12 @@ msgstr ""
 msgid "pdq"
 msgstr ""
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, c-format
 msgid "Expert"
 msgstr ""
@@ -1021,11 +1035,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1068,7 +1077,12 @@ msgid ""
 "idea to review this setup."
 msgstr ""
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, c-format
+msgid "TV card"
+msgstr ""
+
+#: ../help.pm:809
 #, c-format
 msgid "ISDN card"
 msgstr ""
diff --git a/perl-install/install/help/po/af.po b/perl-install/install/help/po/af.po
index 828c570a4..d3fc94ce1 100644
--- a/perl-install/install/help/po/af.po
+++ b/perl-install/install/help/po/af.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-af\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2005-04-21 17:33+0200\n"
 "Last-Translator: Dirk van der Walt <dirkvanderwalt@webmail.co.za>\n"
 "Language-Team: Afrikaans\n"
@@ -123,6 +123,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr "Wil u hierdie funksie gebruik?"
 
@@ -225,8 +235,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -398,19 +407,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr "Outomatiese-afhanklikhede"
 
-#: ../help.pm:186
-#, fuzzy, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": deur op die \"%s\" knoppie te klik, sal u toegang tot die 'printer\n"
-"configuration wizard' kry. Gaan gerus die ooreenstemde hoofstuk in die\n"
-"\"Starter Guide\" na vir meer inligting. Dit stem baie ooreen met die een."
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, fuzzy, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -467,7 +464,12 @@ msgstr ""
 "Internetkonneksie daarvoor benodig. Kies 'n bediener naby u. Hierdie opsie\n"
 "laat u toe om hierdie rekenaar self as 'n tyd-bediener te gebruik."
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, c-format
 msgid "Automatic time synchronization"
 msgstr "Outotydsinkronisasie"
@@ -791,7 +793,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "Gebruik bestaande partisies"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "Wis hele skyf"
@@ -868,7 +875,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Skep outo-installasieskyf"
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, fuzzy, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -1122,12 +1144,37 @@ msgstr ""
 " stelsel gebruik word. Maak dit bietjie groter vir spaar 'kernel' en\n"
 "'ramdisk' beelde vir hulp in nood situasies."
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr "Outoheg van verwyderbare media"
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "Skakel tussen normale/kenner modus"
@@ -1365,7 +1412,12 @@ msgstr ""
 msgid "Espanol"
 msgstr "Espanol"
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, fuzzy, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -1448,81 +1500,7 @@ msgstr ""
 "Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
 "ttyS0 onder GNU/Linux is."
 
-#: ../help.pm:691
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Hierdie is die belangrikste oomblik vir u GNU/Linux-rekenaar se sekuriteit:\n"
-"u moet 'n wagwoord voorsien vir \"root\". \"Root\" is die supergebruiker "
-"wat\n"
-"dinge doen soos om die sagteware op te dateer, gebruikers by te voeg,\n"
-"en die konfigurasie te verander. \"Root\" kan alles doen! Hieroor moet\n"
-"u 'n deeglike wagwoord vir \"root\" kies - (DrakX sal jou tune as die wag-\n"
-"woord nie op spec is nie.) U kan wel die wagwoord uitlaat, maar dit word\n"
-"te sterkste afgeraai. GNU/Linux is net so vatbaar vir foute soos enige\n"
-"ander bedryfstelsel. Aangesien \"root\" geen perke het nie, kan hy/sy\n"
-"maklik skade aanrig as die persoon roekeloos handel. Dit moet dus\n"
-"moeilik wees vir 'n persoon om \"root\" te word.\n"
-"\n"
-"Die wagwoord behoort 'n mengsel van letters en syfers te wees en ten minste\n"
-"8 karakters lank te wees. Moet dit nie neerskryf nie, dit veroorsaak 'n\n"
-"swak skakel\n"
-"\n"
-"Moet dit ook nie te vreemd maak nie, u moet dit tog kan onthou!\n"
-"\n"
-"Indien u gebruik maak van 'n eksterne bediener wat die toegang beheer,\n"
-"klik op die \"%s\"-knoppie.\n"
-"\n"
-"Indien u netwerk gebruik maak van LDAP, NIS of 'n Windows PDC, moet\n"
-"u die gepaste diens vir \"%s\" kies. Vra u administrateur indien u nie weet\n"
-"watter een om te kies nie.\n"
-"\n"
-"Indien u probleme ondervind om wagwoorde te onthou, en die rekenaar is\n"
-"ver van die Internet af, en u vertrou almal wat die masjien gebruik, kan u\n"
-"kies om \"%s\" te gebruik. -once & heavy!-"
-
-#: ../help.pm:725
-#, c-format
-msgid "authentication"
-msgstr "magtiging"
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, fuzzy, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -1612,7 +1590,12 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, c-format
 msgid "Expert"
 msgstr "Ervare"
@@ -1690,11 +1673,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1787,7 +1765,12 @@ msgstr ""
 " * \"%s\": hier kan u fyner verstellings maak op die dienste wat sal afskop\n"
 "Ondersoek dit gerus indien u die rekenaar as bediener gaan gebruik."
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, fuzzy, c-format
+msgid "TV card"
+msgstr "ISDN-kaart"
+
+#: ../help.pm:809
 #, c-format
 msgid "ISDN card"
 msgstr "ISDN-kaart"
@@ -1836,4 +1819,106 @@ msgstr "Volgende ->"
 msgid "<- Previous"
 msgstr "<- Vorige"
 
-#
+#, fuzzy
+#~ msgid ""
+#~ "\"%s\": clicking on the \"%s\" button will open the printer "
+#~ "configuration\n"
+#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
+#~ "more\n"
+#~ "information on how to set up a new printer. The interface presented in "
+#~ "our\n"
+#~ "manual is similar to the one used during installation."
+#~ msgstr ""
+#~ "\"%s\": deur op die \"%s\" knoppie te klik, sal u toegang tot die "
+#~ "'printer\n"
+#~ "configuration wizard' kry. Gaan gerus die ooreenstemde hoofstuk in die\n"
+#~ "\"Starter Guide\" na vir meer inligting. Dit stem baie ooreen met die een."
+
+#, fuzzy
+#~ msgid ""
+#~ "This is the most crucial decision point for the security of your GNU/"
+#~ "Linux\n"
+#~ "system: you must enter the \"root\" password. \"Root\" is the system\n"
+#~ "administrator and is the only user authorized to make updates, add "
+#~ "users,\n"
+#~ "change the overall system configuration, and so on. In short, \"root\" "
+#~ "can\n"
+#~ "do everything! That's why you must choose a password which is difficult "
+#~ "to\n"
+#~ "guess: DrakX will tell you if the password you chose is too simple. As "
+#~ "you\n"
+#~ "can see, you're not forced to enter a password, but we strongly advise\n"
+#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
+#~ "operating system. Since \"root\" can overcome all limitations and\n"
+#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
+#~ "partitions themselves, it is important that it be difficult to become\n"
+#~ "\"root\".\n"
+#~ "\n"
+#~ "The password should be a mixture of alphanumeric characters and at least "
+#~ "8\n"
+#~ "characters long. Never write down the \"root\" password -- it makes it "
+#~ "far\n"
+#~ "too easy to compromise your system.\n"
+#~ "\n"
+#~ "One caveat: do not make the password too long or too complicated because "
+#~ "you\n"
+#~ "must be able to remember it!\n"
+#~ "\n"
+#~ "The password will not be displayed on screen as you type it. To reduce "
+#~ "the\n"
+#~ "chance of a blind typing error you'll need to enter the password twice. "
+#~ "If\n"
+#~ "you do happen to make the same typing error twice, you'll have to use "
+#~ "this\n"
+#~ "``incorrect'' password the first time you'll try to connect as \"root\".\n"
+#~ "\n"
+#~ "If you want an authentication server to control access to your computer,\n"
+#~ "click on the \"%s\" button.\n"
+#~ "\n"
+#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
+#~ "authentication\n"
+#~ "services, select the appropriate one for \"%s\". If you do not know "
+#~ "which\n"
+#~ "one to use, you should ask your network administrator.\n"
+#~ "\n"
+#~ "If you happen to have problems with remembering passwords, or if your\n"
+#~ "computer will never be connected to the Internet and you absolutely "
+#~ "trust\n"
+#~ "everybody who uses your computer, you can choose to have \"%s\"."
+#~ msgstr ""
+#~ "Hierdie is die belangrikste oomblik vir u GNU/Linux-rekenaar se "
+#~ "sekuriteit:\n"
+#~ "u moet 'n wagwoord voorsien vir \"root\". \"Root\" is die supergebruiker "
+#~ "wat\n"
+#~ "dinge doen soos om die sagteware op te dateer, gebruikers by te voeg,\n"
+#~ "en die konfigurasie te verander. \"Root\" kan alles doen! Hieroor moet\n"
+#~ "u 'n deeglike wagwoord vir \"root\" kies - (DrakX sal jou tune as die "
+#~ "wag-\n"
+#~ "woord nie op spec is nie.) U kan wel die wagwoord uitlaat, maar dit word\n"
+#~ "te sterkste afgeraai. GNU/Linux is net so vatbaar vir foute soos enige\n"
+#~ "ander bedryfstelsel. Aangesien \"root\" geen perke het nie, kan hy/sy\n"
+#~ "maklik skade aanrig as die persoon roekeloos handel. Dit moet dus\n"
+#~ "moeilik wees vir 'n persoon om \"root\" te word.\n"
+#~ "\n"
+#~ "Die wagwoord behoort 'n mengsel van letters en syfers te wees en ten "
+#~ "minste\n"
+#~ "8 karakters lank te wees. Moet dit nie neerskryf nie, dit veroorsaak 'n\n"
+#~ "swak skakel\n"
+#~ "\n"
+#~ "Moet dit ook nie te vreemd maak nie, u moet dit tog kan onthou!\n"
+#~ "\n"
+#~ "Indien u gebruik maak van 'n eksterne bediener wat die toegang beheer,\n"
+#~ "klik op die \"%s\"-knoppie.\n"
+#~ "\n"
+#~ "Indien u netwerk gebruik maak van LDAP, NIS of 'n Windows PDC, moet\n"
+#~ "u die gepaste diens vir \"%s\" kies. Vra u administrateur indien u nie "
+#~ "weet\n"
+#~ "watter een om te kies nie.\n"
+#~ "\n"
+#~ "Indien u probleme ondervind om wagwoorde te onthou, en die rekenaar is\n"
+#~ "ver van die Internet af, en u vertrou almal wat die masjien gebruik, kan "
+#~ "u\n"
+#~ "kies om \"%s\" te gebruik. -once & heavy!-"
+
+#~ msgid "authentication"
+#~ msgstr "magtiging"
diff --git a/perl-install/install/help/po/am.po b/perl-install/install/help/po/am.po
index a13e3c08c..7ceedce4f 100644
--- a/perl-install/install/help/po/am.po
+++ b/perl-install/install/help/po/am.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2004-06-01 03:36+0100\n"
 "Last-Translator: Alemayehu <alemayehu@gmx.at>\n"
 "Language-Team: Amharic <am-translate@geez.org>\n"
@@ -66,6 +66,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr "ይህንን ሁኔታ መጠቀም ይፈልጋሉ?"
 
@@ -135,8 +145,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -232,16 +241,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr "ራስ-ገዛዊ ራስን መቻል"
 
-#: ../help.pm:186
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -279,7 +279,12 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, fuzzy, c-format
 msgid "Automatic time synchronization"
 msgstr "ቀን እና ሰዓት"
@@ -469,7 +474,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "የነበረውን ክፋይ ተጠቀም"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "ዲስኩን እንዳለ ደምስስ"
@@ -517,7 +527,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr ""
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -656,12 +681,37 @@ msgid ""
 "emergency boot situations."
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr ""
@@ -806,7 +856,12 @@ msgstr ""
 msgid "Espanol"
 msgstr "ስፓኒሽ"
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -860,53 +915,7 @@ msgid ""
 "Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
-#: ../help.pm:691
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: ../help.pm:725
-#, c-format
-msgid "authentication"
-msgstr ""
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -961,7 +970,12 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, fuzzy, c-format
 msgid "Expert"
 msgstr "የመሸፈኛ ዘዴ"
@@ -1019,11 +1033,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1066,7 +1075,12 @@ msgid ""
 "idea to review this setup."
 msgstr ""
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, fuzzy, c-format
+msgid "TV card"
+msgstr "የISDN ካርድ"
+
+#: ../help.pm:809
 #, c-format
 msgid "ISDN card"
 msgstr "የISDN ካርድ"
@@ -1105,4 +1119,3 @@ msgstr "የሚቀጥለው ->"
 #, c-format
 msgid "<- Previous"
 msgstr "<- የቀድሞው"
-
diff --git a/perl-install/install/help/po/ar.po b/perl-install/install/help/po/ar.po
index a33dab8c8..7d6029330 100644
--- a/perl-install/install/help/po/ar.po
+++ b/perl-install/install/help/po/ar.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2005-03-03 01:06+0300\n"
 "Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
 "Language-Team: Arabic <support@arabeyes.org>\n"
@@ -115,6 +115,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr "هل تريد استخدام هذه الميزة؟"
 
@@ -195,7 +205,7 @@ msgstr ""
 "فقط اضغط على \"%s\"، ولن يتمّ تثبيت تلك الحزم.."
 
 #: ../help.pm:95
-#, c-format
+#, fuzzy, c-format
 msgid ""
 "It's now time to specify which programs you wish to install on your system.\n"
 "There are thousands of packages available for Mandriva Linux, and to make "
@@ -216,8 +226,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -400,21 +409,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr "مُعتمدات آلية"
 
-#: ../help.pm:186
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": الضغط على \"%s\" سيفتح معالج تهيئة\n"
-"الطابعة. اقرأ الفصل المختص في ``دليل المبتدئ''\n"
-"لمزيد من المعلومات عن كيفية تهيئة طابعة جديدة. الواجهة\n"
-"المقدمة في دليلنا\n"
-"هي مماثلة لتلك المستخدمة أثناء التثبيت."
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -479,7 +474,12 @@ msgstr ""
 "الأقرب إليك. في الحقيقة يُثبت هذا الخيار خادم وقت يمكن استخدامه\n"
 "من قبل الأجهزة الأخرى على الشبكة المحلية أيضاً."
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, c-format
 msgid "Automatic time synchronization"
 msgstr "تزامن وقت آلي"
@@ -814,7 +814,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "استخدام التجزيء الموجود"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "مسح كل القرص"
@@ -893,7 +898,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "إنشاء قرص تثبيت آلي"
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -1149,12 +1169,37 @@ msgstr ""
 "مفيد لتخزين نواة احتياطية وصور ramdisk من أجل\n"
 "أوضاع الإقلاع الطّارئة."
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr "التركيب الآلي للوسائط القابلة للإزالة"
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "التغيير إلى الوضع العادي/وضع الخبير"
@@ -1408,7 +1453,12 @@ msgstr ""
 msgid "Espanol"
 msgstr "الأسبانية"
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -1497,89 +1547,7 @@ msgstr ""
 "الرجاء اختيار المنفذ الصحيح. مثلاً لمنفذ \"COM1\" في\n"
 "ويندوز اسمه \"ttys0\" في لينكس."
 
-#: ../help.pm:691
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"هذه هي أهم خطوة تتخذها لأمن نظام جنو/لينكس الخاصّ بك:\n"
-"عليك إدخال كلمة مرور المستخدم \"root\". \"Root\" هو\n"
-"مدير النظام والمستخدم الوحيد المخوّل بتحديث النظام، وإضافة المستخدمين،\n"
-"وتغيير تهيئة النظام بشكل عام، الخ. باختصار يمكن للمستخدم \"root\" أن يفعل\n"
-"كل شئ! لذا عليك اختيار كلمة مرور صعبة\n"
-"التّخمين: سيخبرك DrakX إذا كانت كلمة المرور التي تستخدمها سهلة. كما\n"
-"ترى، لست مجبراً على إدخال كلمة مرور، لكننا ننصح بشدة ألا تفعل هذا. جنو/لينكس "
-"مُعرّص لأخطاء المُشغّل كأيّ\n"
-"نظام تشغيل آخر. وحيث أن \"الجذر\" يمكنه تعدي كل الحدود\n"
-"و قد يحذف كل البيانات عن غير قصد بالوصول إلى التجزيئات بلا مبالاة\n"
-"فإنّه من المهمّ أن يكون من الصّعب أن تصبح المستخدم\n"
-"\"root\".\n"
-"\n"
-"يجب أن تكون كلمة المرور خليطاً من الحروف والأرقام كما يجب أن تحتوي\n"
-"على 8 حروف على الأقل. لا تكتب كلمة مرور \"الجذر\" على ورق -- هذا يسهّل\n"
-"اختراق النظام إذا رأى أحد كلمة المرور.\n"
-"\n"
-"نصيحة أخرى -- لا تجعل كلمة المرور طويلة جداً أو معقّدة لأنك يجب أن تكون\n"
-"قادراً على تذكرها!\n"
-"\n"
-"لن يتم عرض كلمة المرور على الشاشة عند كتابتها. لتقليل فرصة حدوث\n"
-"خطأ أثناء الكتابة، ستحتاج إلى إدخال كلمة المرور مرتين.\n"
-"إذا أخطأت في الكتابة في المرتين، فسيجب استخدام كلمة\n"
-"المرور \"الخاطئة\" في المرة الأولى التي ستحاول فيها الاتصال كمستخدم \"جذر"
-"\".\n"
-"\n"
-"إذا أردت أن يكون الوصول إلى هذا الحاسب يتحكّم به\n"
-"خادم مواثقة، اضغط \"%s\".\n"
-"\n"
-"إذا كانت شبكتك تستخدم LDAP، أوNIS، أو خدمات PDC مواثقة نطاق ويندوز، اختر "
-"الخيار المناسب لـ\"%s\". إن لم تعرف أيّها تريد\n"
-"استخدامه، اسأل مدير الشبكة لديك.\n"
-"\n"
-"إذا كانت لديك مشكلة في تذكر كلمات المرور، يمكنك اختيار\n"
-"\"%s\" إذا لم يكن الحاسب الخاص بك متصلاً بالإنترنت،\n"
-"أو أنك تثق في جميع من يستخدمون حاسبك."
-
-#: ../help.pm:725
-#, c-format
-msgid "authentication"
-msgstr "المواثقة"
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -1676,7 +1644,12 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, c-format
 msgid "Expert"
 msgstr "وضعية الخبير"
@@ -1730,7 +1703,7 @@ msgstr ""
 "آخر."
 
 #: ../help.pm:794
-#, c-format
+#, fuzzy, c-format
 msgid ""
 "As a review, DrakX will present a summary of information it has gathered\n"
 "about your system. Depending on the hardware installed on your machine, you\n"
@@ -1753,11 +1726,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1867,7 +1835,12 @@ msgstr ""
 "على ماكينتك. إن نويت استخدام هذه الماكنية كخادم فإنّها لفكرة جيّدة\n"
 "أن تُراجع هذه الخطوة."
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, fuzzy, c-format
+msgid "TV card"
+msgstr "بطاقة ISDN"
+
+#: ../help.pm:809
 #, c-format
 msgid "ISDN card"
 msgstr "بطاقة ISDN"
@@ -1917,3 +1890,109 @@ msgstr "التالي ->"
 msgid "<- Previous"
 msgstr "<- السابق "
 
+#~ msgid ""
+#~ "\"%s\": clicking on the \"%s\" button will open the printer "
+#~ "configuration\n"
+#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
+#~ "more\n"
+#~ "information on how to set up a new printer. The interface presented in "
+#~ "our\n"
+#~ "manual is similar to the one used during installation."
+#~ msgstr ""
+#~ "\"%s\": الضغط على \"%s\" سيفتح معالج تهيئة\n"
+#~ "الطابعة. اقرأ الفصل المختص في ``دليل المبتدئ''\n"
+#~ "لمزيد من المعلومات عن كيفية تهيئة طابعة جديدة. الواجهة\n"
+#~ "المقدمة في دليلنا\n"
+#~ "هي مماثلة لتلك المستخدمة أثناء التثبيت."
+
+#~ msgid ""
+#~ "This is the most crucial decision point for the security of your GNU/"
+#~ "Linux\n"
+#~ "system: you must enter the \"root\" password. \"Root\" is the system\n"
+#~ "administrator and is the only user authorized to make updates, add "
+#~ "users,\n"
+#~ "change the overall system configuration, and so on. In short, \"root\" "
+#~ "can\n"
+#~ "do everything! That's why you must choose a password which is difficult "
+#~ "to\n"
+#~ "guess: DrakX will tell you if the password you chose is too simple. As "
+#~ "you\n"
+#~ "can see, you're not forced to enter a password, but we strongly advise\n"
+#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
+#~ "operating system. Since \"root\" can overcome all limitations and\n"
+#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
+#~ "partitions themselves, it is important that it be difficult to become\n"
+#~ "\"root\".\n"
+#~ "\n"
+#~ "The password should be a mixture of alphanumeric characters and at least "
+#~ "8\n"
+#~ "characters long. Never write down the \"root\" password -- it makes it "
+#~ "far\n"
+#~ "too easy to compromise your system.\n"
+#~ "\n"
+#~ "One caveat: do not make the password too long or too complicated because "
+#~ "you\n"
+#~ "must be able to remember it!\n"
+#~ "\n"
+#~ "The password will not be displayed on screen as you type it. To reduce "
+#~ "the\n"
+#~ "chance of a blind typing error you'll need to enter the password twice. "
+#~ "If\n"
+#~ "you do happen to make the same typing error twice, you'll have to use "
+#~ "this\n"
+#~ "``incorrect'' password the first time you'll try to connect as \"root\".\n"
+#~ "\n"
+#~ "If you want an authentication server to control access to your computer,\n"
+#~ "click on the \"%s\" button.\n"
+#~ "\n"
+#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
+#~ "authentication\n"
+#~ "services, select the appropriate one for \"%s\". If you do not know "
+#~ "which\n"
+#~ "one to use, you should ask your network administrator.\n"
+#~ "\n"
+#~ "If you happen to have problems with remembering passwords, or if your\n"
+#~ "computer will never be connected to the Internet and you absolutely "
+#~ "trust\n"
+#~ "everybody who uses your computer, you can choose to have \"%s\"."
+#~ msgstr ""
+#~ "هذه هي أهم خطوة تتخذها لأمن نظام جنو/لينكس الخاصّ بك:\n"
+#~ "عليك إدخال كلمة مرور المستخدم \"root\". \"Root\" هو\n"
+#~ "مدير النظام والمستخدم الوحيد المخوّل بتحديث النظام، وإضافة المستخدمين،\n"
+#~ "وتغيير تهيئة النظام بشكل عام، الخ. باختصار يمكن للمستخدم \"root\" أن "
+#~ "يفعل\n"
+#~ "كل شئ! لذا عليك اختيار كلمة مرور صعبة\n"
+#~ "التّخمين: سيخبرك DrakX إذا كانت كلمة المرور التي تستخدمها سهلة. كما\n"
+#~ "ترى، لست مجبراً على إدخال كلمة مرور، لكننا ننصح بشدة ألا تفعل هذا. جنو/"
+#~ "لينكس مُعرّص لأخطاء المُشغّل كأيّ\n"
+#~ "نظام تشغيل آخر. وحيث أن \"الجذر\" يمكنه تعدي كل الحدود\n"
+#~ "و قد يحذف كل البيانات عن غير قصد بالوصول إلى التجزيئات بلا مبالاة\n"
+#~ "فإنّه من المهمّ أن يكون من الصّعب أن تصبح المستخدم\n"
+#~ "\"root\".\n"
+#~ "\n"
+#~ "يجب أن تكون كلمة المرور خليطاً من الحروف والأرقام كما يجب أن تحتوي\n"
+#~ "على 8 حروف على الأقل. لا تكتب كلمة مرور \"الجذر\" على ورق -- هذا يسهّل\n"
+#~ "اختراق النظام إذا رأى أحد كلمة المرور.\n"
+#~ "\n"
+#~ "نصيحة أخرى -- لا تجعل كلمة المرور طويلة جداً أو معقّدة لأنك يجب أن تكون\n"
+#~ "قادراً على تذكرها!\n"
+#~ "\n"
+#~ "لن يتم عرض كلمة المرور على الشاشة عند كتابتها. لتقليل فرصة حدوث\n"
+#~ "خطأ أثناء الكتابة، ستحتاج إلى إدخال كلمة المرور مرتين.\n"
+#~ "إذا أخطأت في الكتابة في المرتين، فسيجب استخدام كلمة\n"
+#~ "المرور \"الخاطئة\" في المرة الأولى التي ستحاول فيها الاتصال كمستخدم \"جذر"
+#~ "\".\n"
+#~ "\n"
+#~ "إذا أردت أن يكون الوصول إلى هذا الحاسب يتحكّم به\n"
+#~ "خادم مواثقة، اضغط \"%s\".\n"
+#~ "\n"
+#~ "إذا كانت شبكتك تستخدم LDAP، أوNIS، أو خدمات PDC مواثقة نطاق ويندوز، اختر "
+#~ "الخيار المناسب لـ\"%s\". إن لم تعرف أيّها تريد\n"
+#~ "استخدامه، اسأل مدير الشبكة لديك.\n"
+#~ "\n"
+#~ "إذا كانت لديك مشكلة في تذكر كلمات المرور، يمكنك اختيار\n"
+#~ "\"%s\" إذا لم يكن الحاسب الخاص بك متصلاً بالإنترنت،\n"
+#~ "أو أنك تثق في جميع من يستخدمون حاسبك."
+
+#~ msgid "authentication"
+#~ msgstr "المواثقة"
diff --git a/perl-install/install/help/po/az.po b/perl-install/install/help/po/az.po
index f8948da00..9a9dd57e1 100644
--- a/perl-install/install/help/po/az.po
+++ b/perl-install/install/help/po/az.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-az\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2005-03-31 14:21+0200\n"
 "Last-Translator: Mətin Əmirov <metin@karegen.com>\n"
 "Language-Team: Azerbaijani <translation-team-az@lists.sourceforge.net>\n"
@@ -124,6 +124,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr "Bu xüsusiyyəti istifadə etmək istəyirsiniz?"
 
@@ -231,8 +241,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -417,17 +426,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr "Avtomatik asıllılıqlar"
 
-#: ../help.pm:186
-#, fuzzy, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\":  \"%s\" düyməsinə basmaq çapçı quraşdırma sehirbazını başladacaq."
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, fuzzy, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -499,7 +498,12 @@ msgstr ""
 "Bu seçim əslində yerli şəbəkənizdəki başqa kompüterlərin də istifadə edə\n"
 "biləcəyi zaman vericisini qurur."
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, c-format
 msgid "Automatic time synchronization"
 msgstr "Avtomatik zaman sinxronlaşdırılması"
@@ -848,7 +852,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "Mövcud bölməni işlət"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "Bütün diski sil"
@@ -928,7 +937,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Avtomatik qurulum disketi hazırla"
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, fuzzy, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -1190,12 +1214,37 @@ msgstr ""
 "Əgər daha çox yeriniz varsa, məsələn 50 MB, onda bütün kernel və ramdisk \n"
 "açılış əkslərinizi təcili hallar üçün burada saxlaya bilərsiniz."
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr "Sökülə bilən avadanlıqların avtomatik bağlanması"
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "Normal modla mütəxəssis modu arasında keç"
@@ -1430,7 +1479,12 @@ msgstr ""
 msgid "Espanol"
 msgstr "İspanca"
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, fuzzy, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -1508,90 +1562,7 @@ msgstr ""
 "Xahiş edirik, doğru qapını seçin. Məsələn, Windows'dakı COM1\n"
 "GNU/Linuks'da ttyS0'dır."
 
-#: ../help.pm:691
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Bu, GNU/Linuks sisteminizin təhlükəsizliyi üçün ən əsas mərhələdir.\n"
-"\"Ali istifadəçi (root)\" şifərsini daxil edəcəksiniz. \"Ali istifadəçi\" "
-"sistemin\n"
-"idarəçisidir və yalnız o yeniləmələri, istifadəçiləri əlavə edib/silməyi\n"
-"sistemin bütün qurğularını dəyişdirə bilər. Qısaca, \"ali istifadəçi\" hər\n"
-"şeyi edə bilər! Buna görə də tapılması çətin olan bir şifrə seçməlisiniz.\n"
-"DrakX seçdiyiniz şifrənin asan olub olmadığını sizə bildirəcək. Görüdüyünüz\n"
-"kimi, şifrə müəyyən etməkdə məcbur deyilsiniz, yalnız bunu sizə şiddətlə\n"
-"məsləhət etmirik. GNU/Linuks da diqər əməliyyat sistemləri kimi "
-"istifadəçinin\n"
-"xətasından çox tə'sir ala bilər. \"Ali istifadəçi\" bütün həddləri keçərək\n"
-"bütün bölmələrdəki bütün mə'lumatları silə bilər. Ona görə də ali "
-"istifadəçi\n"
-"olma imkanını olduqca çətinləşdirməlisiniz.\n"
-"\n"
-"Şifrəniz ədəd və hərflərin qarışığı olmalıdır və 8 hərfdən qısa "
-"olmamalıdır.\n"
-"Şifrəni heçvaxt başqa bir yerə qeyd etməyin.\n"
-"\n"
-"Yalnız şifrəni çox uzun ya da çətin də seçməyin ona görə ki onu əzbərləmək\n"
-"məcburiyyətindəsiniz!\n"
-"\n"
-"Şifrənizi yazarkən ekranda göstərilməyəcək. Xəta riskini azaltmaq üçün\n"
-"şifrəni iki dəfə daxil edəcəksiniz. Burada diqqətli olun və eyni xətanı\n"
-"iki dəfə etməyin.\n"
-"\n"
-"Əgər bu kompüterə yetişmənin səlahiyyət vericisi tərəfindən idarə "
-"edilməsini\n"
-"istəyirsinizsə, \"%s\" düyməsinə basın.\n"
-"\n"
-"Əgər şəbəkəniz LDAP, NIS, ya da PDC Windows Domain authentication\n"
-"xidmətlərindən birisini işlədirsə, \"%s\" üçün uyğun gələnini seçin. Əgər\n"
-"hansını işlədəcəyinizi bilmirsinizsə, şəbəkə idarəçinizdən soruşun.\n"
-"\n"
-"Əgər şifrələri yadda saxlamaqda çətinlik çəkirsinizsə, internetə heç\n"
-"vaxt bağlanmayacaqsanızsa ya da kompüterini işlədən hamıya e'tibar\n"
-"edirsinizsə \"%s\" seçimini seçə bilərsiniz."
-
-#: ../help.pm:725
-#, c-format
-msgid "authentication"
-msgstr "səlahiyyətləndirmə"
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, fuzzy, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -1687,7 +1658,12 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, c-format
 msgid "Expert"
 msgstr "Usta"
@@ -1763,11 +1739,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1874,7 +1845,12 @@ msgstr ""
 "bilərsiniz.\n"
 "Əgər sisteminizi verici olaraq işlətəcəksəniz, bu qurğuları gözdən keçirin."
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, fuzzy, c-format
+msgid "TV card"
+msgstr "ISDN kartı"
+
+#: ../help.pm:809
 #, c-format
 msgid "ISDN card"
 msgstr "ISDN kartı"
@@ -1924,3 +1900,113 @@ msgstr "Sonrakı ->"
 msgid "<- Previous"
 msgstr "<- Əvvəlki"
 
+#, fuzzy
+#~ msgid ""
+#~ "\"%s\": clicking on the \"%s\" button will open the printer "
+#~ "configuration\n"
+#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
+#~ "more\n"
+#~ "information on how to set up a new printer. The interface presented in "
+#~ "our\n"
+#~ "manual is similar to the one used during installation."
+#~ msgstr ""
+#~ "\"%s\":  \"%s\" düyməsinə basmaq çapçı quraşdırma sehirbazını başladacaq."
+
+#, fuzzy
+#~ msgid ""
+#~ "This is the most crucial decision point for the security of your GNU/"
+#~ "Linux\n"
+#~ "system: you must enter the \"root\" password. \"Root\" is the system\n"
+#~ "administrator and is the only user authorized to make updates, add "
+#~ "users,\n"
+#~ "change the overall system configuration, and so on. In short, \"root\" "
+#~ "can\n"
+#~ "do everything! That's why you must choose a password which is difficult "
+#~ "to\n"
+#~ "guess: DrakX will tell you if the password you chose is too simple. As "
+#~ "you\n"
+#~ "can see, you're not forced to enter a password, but we strongly advise\n"
+#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
+#~ "operating system. Since \"root\" can overcome all limitations and\n"
+#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
+#~ "partitions themselves, it is important that it be difficult to become\n"
+#~ "\"root\".\n"
+#~ "\n"
+#~ "The password should be a mixture of alphanumeric characters and at least "
+#~ "8\n"
+#~ "characters long. Never write down the \"root\" password -- it makes it "
+#~ "far\n"
+#~ "too easy to compromise your system.\n"
+#~ "\n"
+#~ "One caveat: do not make the password too long or too complicated because "
+#~ "you\n"
+#~ "must be able to remember it!\n"
+#~ "\n"
+#~ "The password will not be displayed on screen as you type it. To reduce "
+#~ "the\n"
+#~ "chance of a blind typing error you'll need to enter the password twice. "
+#~ "If\n"
+#~ "you do happen to make the same typing error twice, you'll have to use "
+#~ "this\n"
+#~ "``incorrect'' password the first time you'll try to connect as \"root\".\n"
+#~ "\n"
+#~ "If you want an authentication server to control access to your computer,\n"
+#~ "click on the \"%s\" button.\n"
+#~ "\n"
+#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
+#~ "authentication\n"
+#~ "services, select the appropriate one for \"%s\". If you do not know "
+#~ "which\n"
+#~ "one to use, you should ask your network administrator.\n"
+#~ "\n"
+#~ "If you happen to have problems with remembering passwords, or if your\n"
+#~ "computer will never be connected to the Internet and you absolutely "
+#~ "trust\n"
+#~ "everybody who uses your computer, you can choose to have \"%s\"."
+#~ msgstr ""
+#~ "Bu, GNU/Linuks sisteminizin təhlükəsizliyi üçün ən əsas mərhələdir.\n"
+#~ "\"Ali istifadəçi (root)\" şifərsini daxil edəcəksiniz. \"Ali istifadəçi\" "
+#~ "sistemin\n"
+#~ "idarəçisidir və yalnız o yeniləmələri, istifadəçiləri əlavə edib/silməyi\n"
+#~ "sistemin bütün qurğularını dəyişdirə bilər. Qısaca, \"ali istifadəçi\" "
+#~ "hər\n"
+#~ "şeyi edə bilər! Buna görə də tapılması çətin olan bir şifrə "
+#~ "seçməlisiniz.\n"
+#~ "DrakX seçdiyiniz şifrənin asan olub olmadığını sizə bildirəcək. "
+#~ "Görüdüyünüz\n"
+#~ "kimi, şifrə müəyyən etməkdə məcbur deyilsiniz, yalnız bunu sizə şiddətlə\n"
+#~ "məsləhət etmirik. GNU/Linuks da diqər əməliyyat sistemləri kimi "
+#~ "istifadəçinin\n"
+#~ "xətasından çox tə'sir ala bilər. \"Ali istifadəçi\" bütün həddləri "
+#~ "keçərək\n"
+#~ "bütün bölmələrdəki bütün mə'lumatları silə bilər. Ona görə də ali "
+#~ "istifadəçi\n"
+#~ "olma imkanını olduqca çətinləşdirməlisiniz.\n"
+#~ "\n"
+#~ "Şifrəniz ədəd və hərflərin qarışığı olmalıdır və 8 hərfdən qısa "
+#~ "olmamalıdır.\n"
+#~ "Şifrəni heçvaxt başqa bir yerə qeyd etməyin.\n"
+#~ "\n"
+#~ "Yalnız şifrəni çox uzun ya da çətin də seçməyin ona görə ki onu "
+#~ "əzbərləmək\n"
+#~ "məcburiyyətindəsiniz!\n"
+#~ "\n"
+#~ "Şifrənizi yazarkən ekranda göstərilməyəcək. Xəta riskini azaltmaq üçün\n"
+#~ "şifrəni iki dəfə daxil edəcəksiniz. Burada diqqətli olun və eyni xətanı\n"
+#~ "iki dəfə etməyin.\n"
+#~ "\n"
+#~ "Əgər bu kompüterə yetişmənin səlahiyyət vericisi tərəfindən idarə "
+#~ "edilməsini\n"
+#~ "istəyirsinizsə, \"%s\" düyməsinə basın.\n"
+#~ "\n"
+#~ "Əgər şəbəkəniz LDAP, NIS, ya da PDC Windows Domain authentication\n"
+#~ "xidmətlərindən birisini işlədirsə, \"%s\" üçün uyğun gələnini seçin. "
+#~ "Əgər\n"
+#~ "hansını işlədəcəyinizi bilmirsinizsə, şəbəkə idarəçinizdən soruşun.\n"
+#~ "\n"
+#~ "Əgər şifrələri yadda saxlamaqda çətinlik çəkirsinizsə, internetə heç\n"
+#~ "vaxt bağlanmayacaqsanızsa ya da kompüterini işlədən hamıya e'tibar\n"
+#~ "edirsinizsə \"%s\" seçimini seçə bilərsiniz."
+
+#~ msgid "authentication"
+#~ msgstr "səlahiyyətləndirmə"
diff --git a/perl-install/install/help/po/be.po b/perl-install/install/help/po/be.po
index 681952245..d8ff97db8 100644
--- a/perl-install/install/help/po/be.po
+++ b/perl-install/install/help/po/be.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2000-09-24 12:30 +0100\n"
 "Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
 "Language-Team: be\n"
@@ -65,6 +65,16 @@ msgid ""
 msgstr ""
 
 #: ../help.pm:54
+#, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
 #, fuzzy, c-format
 msgid "Do you want to use this feature?"
 msgstr "Вы жадаеце выкарыстоўваць aboot?"
@@ -135,8 +145,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -232,16 +241,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr "Аўтаматычнае вызначэнне"
 
-#: ../help.pm:186
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -279,7 +279,12 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, fuzzy, c-format
 msgid "Automatic time synchronization"
 msgstr "Аўтаматычнае вызначэнне"
@@ -469,7 +474,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "Выкарыстоўваць існуючы раздзел"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "Сцёрці дадзеныя на ўсім дыску"
@@ -517,7 +527,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Стварэнне дыскеты для ўсталявання"
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -656,12 +681,37 @@ msgid ""
 "emergency boot situations."
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr ""
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, fuzzy, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "Звычайны рэжым"
@@ -806,7 +856,12 @@ msgstr ""
 msgid "Espanol"
 msgstr "Эсперанто:"
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -860,53 +915,7 @@ msgid ""
 "Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
-#: ../help.pm:691
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: ../help.pm:725
-#, fuzzy, c-format
-msgid "authentication"
-msgstr "Аўтэнтыфікацыя"
-
-#: ../help.pm:728
+#: ../help.pm:684
 #, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -961,7 +970,12 @@ msgstr ""
 msgid "pdq"
 msgstr ""
 
-#: ../help.pm:768
+#: ../help.pm:724
+#, c-format
+msgid "CUPS"
+msgstr ""
+
+#: ../help.pm:724
 #, fuzzy, c-format
 msgid "Expert"
 msgstr "/Графік"
@@ -1019,11 +1033,6 @@ msgid ""
 " * \"%s\": verify the current mouse configuration and click on the button\n"
 "to change it if necessary.\n"
 "\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
 " * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
 "here. If you notice the sound card is not the one actually present on your\n"
 "system, you can click on the button and choose a different driver.\n"
@@ -1066,7 +1075,12 @@ msgid ""
 "idea to review this setup."
 msgstr ""
 
-#: ../help.pm:858
+#: ../help.pm:809
+#, fuzzy, c-format
+msgid "TV card"
+msgstr "Унутраная ISDN карта"
+
+#: ../help.pm:809
 #, fuzzy, c-format
 msgid "ISDN card"
 msgstr "Унутраная ISDN карта"
@@ -1106,3 +1120,6 @@ msgstr "Далей ->"
 msgid "<- Previous"
 msgstr "<- прылада"
 
+#, fuzzy
+#~ msgid "authentication"
+#~ msgstr "Аўтэнтыфікацыя"
diff --git a/perl-install/install/help/po/bg.po b/perl-install/install/help/po/bg.po
index 3c1d84745..9ed880dde 100644
--- a/perl-install/install/help/po/bg.po
+++ b/perl-install/install/help/po/bg.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-bg\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-04 17:25+0200\n"
+"POT-Creation-Date: 2008-09-12 12:22+0200\n"
 "PO-Revision-Date: 2004-09-15 13:27+0200\n"
 "Last-Translator: Boyan Ivanov <boyan17@bulgaria.com>\n"
 "Language-Team: Bulgarian <dict@linux.zonebg.com>\n"
@@ -121,6 +121,16 @@ msgstr ""
 
 #: ../help.pm:54
 #, c-format
+msgid "User name"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
+msgid "Accept user"
+msgstr ""
+
+#: ../help.pm:54
+#, c-format
 msgid "Do you want to use this feature?"
 msgstr "Искате ли да използвате тази особеност?"
 
@@ -228,8 +238,7 @@ msgid ""
 "configure your system so that it complies as much as possible with the\n"
 "Linux Standard Base specifications.\n"
 "\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
+"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
 "of the system. However, if you do not select the \"LSB\" group you will\n"
 "still have a system which is nearly 100%% LSB-compliant.\n"
 "\n"
@@ -402,16 +411,7 @@ msgstr ""
 msgid "Automatic dependencies"
 msgstr ""
 
-#: ../help.pm:186
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: ../help.pm:192
+#: ../help.pm:185
 #, fuzzy, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -468,7 +468,12 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: ../help.pm:220
+#: ../help.pm:213
+#, c-format
+msgid "Hardware clock set to GMT"
+msgstr ""
+
+#: ../help.pm:213
 #, c-format
 msgid "Automatic time synchronization"
 msgstr "Автоматична синхронизация на времето"
@@ -734,7 +739,12 @@ msgstr ""
 msgid "Use existing partition"
 msgstr "Изпозване на съществуващ дял"
 
-#: ../help.pm:377
+#: ../help.pm:370
+#, c-format
+msgid "Use the free space on the Microsoft Windows® partition"
+msgstr ""
+
+#: ../help.pm:370
 #, c-format
 msgid "Erase entire disk"
 msgstr "Изтрий целия диск"
@@ -815,7 +825,22 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Подготвя дискета за автоматична инсталация"
 
-#: ../help.pm:415
+#: ../help.pm:405
+#, c-format
+msgid "Replay"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Automated"
+msgstr ""
+
+#: ../help.pm:405
+#, c-format
+msgid "Save packages selection"
+msgstr ""
+
+#: ../help.pm:408
 #, fuzzy, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -1060,12 +1085,37 @@ msgstr ""
 "намерите за полезно място, където да съхранявате някое ядро или image на\n"
 "ramdisk в случай на извънредни ситуации."
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Save partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Restore partition table"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Rescue partition table"
+msgstr ""
+
+#: ../help.pm:526
 #, fuzzy, c-format
 msgid "Removable media auto-mounting"
 msgstr "Автоматично монтиране на сменяем носител"
 
-#: ../help.pm:533
+#: ../help.pm:526
+#, c-format
+msgid "Wizard"
+msgstr ""
+
+#: ../help.pm:526
+#, c-format
+msgid "Undo"
+msgstr ""
+
+#: ../help.pm:526
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "Премини в нормален/експертен режим"
@@ -1276,7 +1326,12 @@ msgstr ""
 msgid "Espanol"
 msgstr ""
 
-#: ../help.pm:653
+#: ../help.pm:643
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
+
+#: ../help.pm:646
 #, fuzzy, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -1344,53 +1399,7 @@ msgstr ""
 "Моля, изберете верния порт. Например, портът COM1 под Windows под GNU/Linux\n"
 "се нарича ttyS0."