Merge branch 'master' of git://git.mageia.org/software/i18n/tools

6 files changed, 160 insertions, 270 deletions

diff --git a/docs/mcc-help/zh_CN/drakconnect.xml b/docs/mcc-help/zh_CN/drakconnect.xml
index 1ad4c297..52c82643 100644
--- a/docs/mcc-help/zh_CN/drakconnect.xml
+++ b/docs/mcc-help/zh_CN/drakconnect.xml
@@ -96,17 +96,12 @@ DHCP 服务器获取主机名</emphasis>，主机名也可以由 DHCP 服务器�
 服务器。可以在这里指定计算机主机名。如果没有指定主机名，将会使用默认值
 <literal>localhost.localdomain</literal>。</para>
 
-            <para>For a residential network, the IP address usually looks like
-<emphasis>192.168.x.x</emphasis>, Netmask is
-<emphasis>255.255.255.0</emphasis>, and the Gateway and DNS servers are
-available from your service provider's website.</para>
-
-            <para>In advanced settings, you can specified a <emphasis>Search
-domain</emphasis>. It would usually be your home domain, i.e. if your
-computer is called "splash", and it's full domain name is
-"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless
-you specifically need it, it's ok not to define this setting. Again,
-domestic ADSL would not need this setting.</para>
+            <para>对于家用网络环境，IP
+地址的形式一般为<emphasis>192.168.x.x</emphasis>，网络掩码一般为<emphasis>255.255.255.0</emphasis>，网关和
+DNS 服务器可以从网络运营商的网站上获得。</para>
+
+            <para>在高级设置中，您可以指定<emphasis>查找域名</emphasis>。它通常是您的家庭域名，例如：如果您的计算机名为“pc”，完整的域名为“pc.baidu.com”，那么查找域名就是“baidu.com”。除非您确实需要此功能，否则最好使用默认设置。一般的家用
+ADSL 无需此项设置。</para>
 
             <mediaobject>
               <imageobject>
@@ -116,7 +111,7 @@ domestic ADSL would not need this setting.</para>
           </listitem>
 
           <listitem>
-            <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+            <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
           </listitem>
         </orderedlist>
       </listitem>
@@ -124,16 +119,14 @@ domestic ADSL would not need this setting.</para>
   </section>
 
   <section>
-    <title>A new Satellite connection (DVB)</title>
+    <title>卫星连接（DVB）</title>
 
-    <para>This section hasn't been written yet for lack of resources. If you think you
-can write this help, please contact <link
-ns2:href="https://wiki.mageia.org/en/Documentation_team"> the Doc
-team.</link> Thanking you in advance.</para>
+    <para>由于缺少资源，此部分内容尚未编写。如果您希望编写此帮助，请联系<link
+ns2:href="https://wiki.mageia.org/en/Documentation_team">文档团度</link>。感谢您的支持。</para>
   </section>
 
   <section>
-    <title>A new Cable modem connection</title>
+    <title>新调制解调器连接</title>
 
     <orderedlist>
       <listitem>
@@ -145,7 +138,7 @@ team.</link> Thanking you in advance.</para>
       </listitem>
 
       <listitem>
-        <para>You have to specify a authentication method:</para>
+        <para>您需要指定认证模式：</para>
 
         <itemizedlist>
           <listitem>
@@ -153,8 +146,7 @@ team.</link> Thanking you in advance.</para>
           </listitem>
 
           <listitem>
-            <para>BPALogin (necessary for Telstra). In this case you have to provide User name
-and password.</para>
+            <para>BPALogin（用于 Telstra）。您需要提供用户名和密码。</para>
           </listitem>
         </itemizedlist>
       </listitem>
@@ -164,15 +156,11 @@ and password.</para>
 
         <orderedlist>
           <listitem>
-            <para><emphasis>Cable/IP settings</emphasis>: you have to select if DNS servers
-are declared by the DHCP server or are manually specified, as explained
-below. In the last case, the IP address of DNS servers has to be set. The
-HOSTNAME of the computer can be specified here. If no HOSTNAME is specified,
-the name <literal>localhost.localdomain</literal> is attributed by default.
-The Hostname can also be provided by the DHCP server with the option
-<emphasis>Assign host name from DHCP server</emphasis>. Not all DHCP servers
-have such a function and if you're setting up your PC to get an IP address
-from a domestic ADSL router, it is unlikely.</para>
+            <para><emphasis>有线/IP 设置</emphasis>：您需要指定 DNS 服务器地址是由您的 DHCP
+服务器提供，还是由您手工设置。在后一种情况下，您需要填写 DNS 服务器的
+IP。可以在这里设置计算机的主机名（HOSTNAME）。如果没有设置主机名，系统默认使用<literal>localhost.localdomain</literal>。如果选择了<emphasis>从
+DHCP 服务器获取主机名</emphasis>，主机名也可以由 DHCP 服务器指定。并非所有 DHCP 服务器都有该功能，例如当您通过家用 ADSL
+路由器接入网络。</para>
           </listitem>
 
           <listitem>
@@ -216,22 +204,15 @@ from a domestic ADSL router, it is unlikely.</para>
 
         <orderedlist>
           <listitem>
-            <para><emphasis>Cable/IP settings</emphasis>: you need to declare what DNS servers
-to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME
-is specified, the name <literal>localhost.localdomain</literal> is
-attributed by default.</para>
-
-            <para>For a residential network, the IP address usually looks like
-<emphasis>192.168.x.x</emphasis>, Netmask is
-<emphasis>255.255.255.0</emphasis>, and the Gateway and DNS servers are
-available from your service provider's website.</para>
-
-            <para>In advanced settings, you can specified a <emphasis>Search
-domain</emphasis>. It would usually be your home domain, i.e. if your
-computer is called "splash", and it's full domain name is
-"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless
-you specifically need it, it's ok not to define this setting. Again,
-domestic connection would not need this setting.</para>
+            <para><emphasis>有线/IP 设置</emphasis>：您需要指定使用的 DNS
+服务器。可以在这里指定计算机主机名。如果没有指定主机名，将会使用默认值
+<literal>localhost.localdomain</literal>。</para>
+
+            <para>对于家用网络环境，IP
+地址的形式一般为<emphasis>192.168.x.x</emphasis>，网络掩码一般为<emphasis>255.255.255.0</emphasis>，网关和
+DNS 服务器可以从网络运营商的网站上获得。</para>
+
+            <para>在高级设置中，您可以指定<emphasis>查找域名</emphasis>。它通常是您的家庭域名，例如：如果您的计算机名为“pc”，完整的域名为“pc.baidu.com”，那么查找域名就是“baidu.com”。除非您确实需要此功能，否则最好使用默认设置。一般的家用连接无需此项设置。</para>
 
             <mediaobject>
               <imageobject>
@@ -241,7 +222,7 @@ domestic connection would not need this setting.</para>
           </listitem>
 
           <listitem>
-            <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+            <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
           </listitem>
         </orderedlist>
       </listitem>
@@ -249,22 +230,19 @@ domestic connection would not need this setting.</para>
   </section>
 
   <section>
-    <title>A new DSL connection</title>
+    <title>新 DSL 连接</title>
 
     <para><orderedlist>
         <listitem>
-          <para>If the tool detects network interfaces, it offers to select one and to
-configure it.</para>
+          <para>如果工具检测到了网络接口，将会提示您进行选择并配置。</para>
         </listitem>
 
         <listitem>
-          <para>A list of providers is proposed, classified by countries.  Select your
-provider. If it is not listed, select the option
-<guilabel>Unlisted</guilabel> and then enter the options your provider gave.</para>
+          <para>列表中包含了一系列运营商，并按国家和地区归类，请在其中选择您的运营商。如果这里没有列出您的运营商，请选择<guilabel>未列出</guilabel>，并输入运营商所提供的选项参数。</para>
         </listitem>
 
         <listitem>
-          <para>Select one of the protocols available:</para>
+          <para>选择可用的协议：</para>
 
           <itemizedlist>
             <listitem>
@@ -276,7 +254,7 @@ provider. If it is not listed, select the option
             </listitem>
 
             <listitem>
-              <para>PPP over ADSL (PPPoA)</para>
+              <para>ADSL 上的 PPP 协议（PPPoA）</para>
             </listitem>
 
             <listitem>
@@ -298,35 +276,35 @@ provider. If it is not listed, select the option
             </listitem>
 
             <listitem>
-              <para>Account password</para>
+              <para>账户密码</para>
             </listitem>
 
             <listitem>
-              <para>(Advanced) Virtual Path ID (VPI)</para>
+              <para>（高级）虚拟路径 ID（VPI）</para>
             </listitem>
 
             <listitem>
-              <para>(Advanced) Virtual Circuit ID (VCI)</para>
+              <para>（高级）虚拟环路 ID（VCI）</para>
             </listitem>
           </itemizedlist>
         </listitem>
 
         <listitem>
-          <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+          <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
         </listitem>
       </orderedlist></para>
   </section>
 
   <section>
-    <title>A new ISDN connection</title>
+    <title>新 ISDN 连接</title>
 
     <para><orderedlist>
         <listitem>
-          <para>The wizard asks which device to configure:</para>
+          <para>向导将询问需要配置的设备：</para>
 
           <itemizedlist>
             <listitem>
-              <para>Manual choice (internal ISDN card)</para>
+              <para>手动选择（内部 ISDN 卡）</para>
             </listitem>
 
             <listitem>
@@ -336,29 +314,25 @@ provider. If it is not listed, select the option
         </listitem>
 
         <listitem>
-          <para>A list of hardware is proposed, classified by category and
-manufacturer. Select your card.</para>
+          <para>列表中包含了一系列硬件，并按类型和制造商归类。请选择您的 IDSN 卡。</para>
         </listitem>
 
         <listitem>
-          <para>Select one of the protocols available:</para>
+          <para>选择可用的协议：</para>
 
           <itemizedlist>
             <listitem>
-              <para>Protocol for the rest of the world, except Europe (DHCP)</para>
+              <para>除欧洲外其他地区的协议（DHCP）</para>
             </listitem>
 
             <listitem>
-              <para>Protocol for Europe (EDSS1)</para>
+              <para>欧洲地区的协议（EDSS1）</para>
             </listitem>
           </itemizedlist>
         </listitem>
 
         <listitem>
-          <para>A list of providers is then offered, classified by countries.  Select your
-provider. If it is not listed, select the option
-<guilabel>Unlisted</guilabel> and then enter the options your provider gave
-you. Then it is asked for parameters:</para>
+          <para>列表中包含了一系列运营商，并按国家和地区归类，请在其中选择您的运营商。如果这里没有列出您的运营商，请选择<guilabel>未列出</guilabel>，并输入相关参数：</para>
 
           <itemizedlist>
             <listitem>
@@ -374,7 +348,7 @@ you. Then it is asked for parameters:</para>
             </listitem>
 
             <listitem>
-              <para>Account password</para>
+              <para>账户密码</para>
             </listitem>
 
             <listitem>
@@ -384,14 +358,11 @@ you. Then it is asked for parameters:</para>
         </listitem>
 
         <listitem>
-          <para>After that, you have to select if you get the IP address by automatic or
-manual method. In the last case, specify IP address and Subnet mask.</para>
+          <para>之后，您需要选择自动或手动获取 IP 地址。若手动获取，请指定 IP 地址和子网掩码。</para>
         </listitem>
 
         <listitem>
-          <para>The next step is to choose how DNS servers address are obtained, by
-automatic or manual method. In the case of manual configuration, you have to
-put:</para>
+          <para>下一步是选择如何获取 DNS 服务器地址：使用自动或手动模式。如果是手动模式，您需要输入：</para>
 
           <itemizedlist>
             <listitem>
@@ -399,45 +370,40 @@ put:</para>
             </listitem>
 
             <listitem>
-              <para>First and second DNS Server</para>
+              <para>第一和第二 DNS 服务器</para>
             </listitem>
 
             <listitem>
-              <para>Select if the hostname is set from IP. This option is to select only if you
-are sure that your provider is configured to accept it.</para>
+              <para>是否根据 IP 来设置主机名。仅当您的运营商需要此功能时，您才需要进行设置。</para>
             </listitem>
           </itemizedlist>
         </listitem>
 
         <listitem>
-          <para>The next step is to choose how the gateway address is obtained, by automatic
-or manual method. In the case of manual configuration, you have to enter the
-IP address.</para>
+          <para>下一步是选择如何获取 DNS 服务器地址：使用自动或手动模式。如果是手动模式，您需要输入 IP 地址。</para>
         </listitem>
 
         <listitem>
-          <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+          <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
         </listitem>
       </orderedlist></para>
   </section>
 
   <section>
-    <title>A new Wireless connection (WiFi)</title>
+    <title>新无线连接（WiFi）</title>
 
     <orderedlist>
       <listitem>
-        <para>A first window lists the interfaces which are available and an entry for
-Windows driver (ndiswrapper). Select the one to configure.  Use ndiswrapper
-only if the other configuration methods did not work.</para>
+        <para>第一个窗口中列出了可用的接口，以及 Windows
+兼容驱动（ndiswrapper）。请选择一个来进行配置。只有当其他配置方法都不管用的情况下，您才需要尝试 Windows 兼容驱动。</para>
       </listitem>
 
       <listitem>
-        <para>At this step, the choice is given between the different access points that
-the card has detected.</para>
+        <para>在这一步中，请在网卡检测到的接入点中选择一个进行连接。</para>
       </listitem>
 
       <listitem>
-        <para>Specific parameter for the wireless card are to provide:</para>
+        <para>无线网卡的特定参数包括：</para>
 
         <mediaobject>
           <imageobject>
@@ -447,14 +413,14 @@ the card has detected.</para>
 
         <itemizedlist>
           <listitem>
-            <para>Operating mode:</para>
+            <para>工作模式：</para>
 
             <variablelist>
               <varlistentry>
                 <term>受控的</term>
 
                 <listitem>
-                  <para>To access to an existing access point (the most frequent).</para>
+                  <para>访问现有的接入点（最常用）。</para>
                 </listitem>
               </varlistentry>
 
@@ -462,25 +428,25 @@ the card has detected.</para>
                 <term>Ad-Hoc</term>
 
                 <listitem>
-                  <para>To configure direct connection between computers.</para>
+                  <para>计算机之间直接连接。</para>
                 </listitem>
               </varlistentry>
             </variablelist>
           </listitem>
 
           <listitem>
-            <para>Network Name (ESSID)</para>
+            <para>网络名 (ESSID)</para>
           </listitem>
 
           <listitem>
-            <para>Encryption mode: it depends of how the access point is configured.</para>
+            <para>加密模式：取决于接入点的配置方式。</para>
 
             <variablelist>
               <varlistentry>
                 <term>WPA/WPA2</term>
 
                 <listitem>
-                  <para>This encryption mode is to prefer if your hardware allows it.</para>
+                  <para>如果您的硬件支持此模式，请使用它。</para>
                 </listitem>
               </varlistentry>
 
@@ -488,7 +454,7 @@ the card has detected.</para>
                 <term>WEP</term>
 
                 <listitem>
-                  <para>Some old hardware deals only this encryption method.</para>
+                  <para>一些老旧的硬件仅支持此加密模式。</para>
                 </listitem>
               </varlistentry>
             </variablelist>
@@ -497,14 +463,13 @@ the card has detected.</para>
           <listitem>
             <para>加密密钥</para>
 
-            <para>It is generally provided with the hardware which give the access point.</para>
+            <para>该模式一般由接入点设备决定。</para>
           </listitem>
         </itemizedlist>
       </listitem>
 
       <listitem>
-        <para>At this step, the choice is given between an automatic IP address or a
-manual IP address.</para>
+        <para>在这里，您可以选择手动或自动设置 IP 地址。</para>
       </listitem>
 
       <listitem>
@@ -512,13 +477,10 @@ manual IP address.</para>
 
         <orderedlist>
           <listitem>
-            <para><emphasis>IP settings</emphasis>: you have to select if DNS servers are
-declared by the DHCP server or are manually specified, as explained
-below. In the last case, IP address of DNS servers has to be set. The
-HOSTNAME of the computer can be specified here.  If no HOSTNAME is
-specified, the name localhost.localdomain is attributed by default. The
-Hostname can also be provided by the DHCP server with the option
-<emphasis>Assign host name from DHCP server</emphasis></para>
+            <para><emphasis>IP 设置</emphasis>：您需要指定 DNS 服务器地址是由您的 DHCP
+服务器提供，还是由您手工设置。在后一种情况下，您需要填写 DNS 服务器的
+IP。可以在这里设置计算机的主机名（HOSTNAME）。如果没有设置主机名，系统默认使用<literal>localhost.localdomain</literal>。如果选择了<emphasis>从
+DHCP 服务器获取主机名</emphasis>，主机名也可以由 DHCP 服务器指定。</para>
           </listitem>
 
           <listitem>
@@ -538,7 +500,7 @@ Hostname can also be provided by the DHCP server with the option
               </listitem>
 
               <listitem>
-                <para>Get YP server from DHCP (checked by default): specify the NIS servers</para>
+                <para>从 DHCP 获取 YP 服务器（默认选中）：指定 NIS 服务器</para>
               </listitem>
 
               <listitem>
@@ -552,8 +514,7 @@ Hostname can also be provided by the DHCP server with the option
           </listitem>
 
           <listitem>
-            <para>After accepting the configuration the step, which is common to all
-connection configurations, is explained: <xref linkend="drakconnect-end"/></para>
+            <para>在完成以上设置后，最后一步对所有链接配置进行了说明：<xref linkend="drakconnect-end"/></para>
           </listitem>
         </orderedlist>
       </listitem>
@@ -563,22 +524,18 @@ connection configurations, is explained: <xref linkend="drakconnect-end"/></para
 
         <orderedlist>
           <listitem>
-            <para><emphasis>IP settings</emphasis>: you have to declare DNS servers. The
-HOSTNAME of the computer can be specified here. If no HOSTNAME is specified,
-the name <literal>localhost.localdomain</literal> is attributed by default.</para>
-
-            <para>For a residential network, the IP address always looks like
-<emphasis>192.168.x.x</emphasis>, Netmask is
-<emphasis>255.255.255.0</emphasis>, and the Gateway and DNS servers are
-available from your providers website.</para>
-
-            <para>In advanced settings, you can specified a <emphasis>Search
-domain</emphasis>. It must seem to your hostname without the first name,
-before the period.</para>
+            <para><emphasis>IP 设置</emphasis>：您需要指定 DNS
+服务器地址。可以在这里设置计算机的主机名（HOSTNAME）。如果没有设置主机名，系统默认使用<literal>localhost.localdomain</literal>。</para>
+
+            <para>对于家用网络环境，IP
+地址的形式一般为<emphasis>192.168.x.x</emphasis>，网络掩码一般为<emphasis>255.255.255.0</emphasis>，网关和
+DNS 服务器可以从网络运营商的网站上获得。</para>
+
+            <para>在高级设置中，您可以指定<emphasis>查找域名</emphasis>。它必须和主机名的后半部分一致。</para>
           </listitem>
 
           <listitem>
-            <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+            <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
           </listitem>
         </orderedlist>
       </listitem>
@@ -586,31 +543,27 @@ before the period.</para>
   </section>
 
   <section>
-    <title>A new GPRS/Edge/3G connection</title>
+    <title>新 GPRS/Edge/3G 连接</title>
 
     <para><orderedlist>
         <listitem>
-          <para>If the tool detects wireless interfaces, it offers to select one and to
-configure it.</para>
+          <para>如果工具检测到了无线网卡，将会提示您进行选择并配置。</para>
         </listitem>
 
         <listitem>
-          <para>The PIN is asked. Leave empty if the PIN is not required.</para>
+          <para>系统会提示您输入 PIN。如果不需要 PIN，请将其留空。</para>
         </listitem>
 
         <listitem>
-          <para>The wizard asks for network. If it is not detected, select the option
-<guilabel>Unlisted</guilabel>.</para>
+          <para>向导需要网络连接。如果系统没有检测到网络，请选择 <guilabel>未列出</guilabel>。</para>
         </listitem>
 
         <listitem>
-          <para>A list of providers is proposed, classified by countries.  Select your
-provider. If it is not listed, select the option
-<guilabel>Unlisted</guilabel> and then enter the options your provider gave.</para>
+          <para>列表中包含了一系列运营商，并按国家和地区归类，请在其中选择您的运营商。如果这里没有列出您的运营商，请选择<guilabel>未列出</guilabel>，并输入运营商所提供的选项参数。</para>
         </listitem>
 
         <listitem>
-          <para>Provide access settings</para>
+          <para>访问设置</para>
 
           <itemizedlist>
             <listitem>
@@ -622,32 +575,30 @@ provider. If it is not listed, select the option
             </listitem>
 
             <listitem>
-              <para>Account password</para>
+              <para>账户密码</para>
             </listitem>
           </itemizedlist>
         </listitem>
 
         <listitem>
-          <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+          <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
         </listitem>
       </orderedlist></para>
   </section>
 
   <section>
-    <title>A new Bluetooth Dial-Up Networking connection</title>
+    <title>新蓝牙拨号连接</title>
 
-    <para>This section hasn't been written yet for lack of resources. If you think you
-can write this help, please contact <link
-ns2:href="https://wiki.mageia.org/en/Documentation_team"> the Doc
-team.</link> Thanking you in advance.</para>
+    <para>由于缺少资源，此部分内容尚未编写。如果您希望编写此帮助，请联系<link
+ns2:href="https://wiki.mageia.org/en/Documentation_team">文档团度</link>。感谢您的支持。</para>
   </section>
 
   <section>
-    <title>A new Analog telephone modem connection (POTS)</title>
+    <title>新模拟调制解调器连接（POTS）</title>
 
     <orderedlist>
       <listitem>
-        <para>The wizard asks which device to configure:</para>
+        <para>向导将询问需要配置的设备：</para>
 
         <itemizedlist>
           <listitem>
@@ -655,45 +606,41 @@ team.</link> Thanking you in advance.</para>
           </listitem>
 
           <listitem>
-            <para>Detected hardware, if any.</para>
+            <para>检测可能存在的硬件</para>
           </listitem>
         </itemizedlist>
       </listitem>
 
       <listitem>
-        <para>A list of ports is proposed. Select your port.</para>
+        <para>列表中包含了一系列端口，请在其中选择您的端口。</para>
       </listitem>
 
       <listitem>
-        <para>If not yet installed, it will be suggested that you install the package
-<emphasis>kppp-provider</emphasis>.</para>
+        <para>如果尚未安装软件包 <emphasis>kppp-provider</emphasis>，系统将提示您安装。</para>
       </listitem>
 
       <listitem>
-        <para>A list of providers is proposed, classified by countries. Select your
-provider. If it is not listed, select the option
-<guilabel>Unlisted</guilabel> and then enter the options your provider
-gave. Then it is asked for Dialup options:</para>
+        <para>列表中包含了一系列运营商，并按国家和地区归类，请在其中选择您的运营商。如果这里没有列出您的运营商，请选择<guilabel>未列出</guilabel>，并输入拨号连接所需的参数：</para>
 
         <itemizedlist>
           <listitem>
-            <para><emphasis>Connection name</emphasis></para>
+            <para><emphasis>连接名</emphasis></para>
           </listitem>
 
           <listitem>
-            <para><emphasis>Phone number</emphasis></para>
+            <para><emphasis>电话号码</emphasis></para>
           </listitem>
 
           <listitem>
-            <para><emphasis>Login ID</emphasis></para>
+            <para><emphasis>登录 ID</emphasis></para>
           </listitem>
 
           <listitem>
-            <para><emphasis>Password</emphasis></para>
+            <para><emphasis>密码</emphasis></para>
           </listitem>
 
           <listitem>
-            <para><emphasis>Authentication</emphasis>, choose between:</para>
+            <para><emphasis>认证方式</emphasis>，请在以下几种方式中选择：</para>
 
             <itemizedlist>
               <listitem>
@@ -721,45 +668,43 @@ gave. Then it is asked for Dialup options:</para>
       </listitem>
 
       <listitem>
-        <para>The next steps are exposed at <xref linkend="drakconnect-end"/></para>
+        <para>此处<xref linkend="drakconnect-end"/>对下一步的操作进行了展示</para>
       </listitem>
     </orderedlist>
   </section>
 
   <section xml:id="drakconnect-end">
-    <title>Ending the configuration</title>
+    <title>完成配置</title>
 
-    <para>In the next step, you can specify:</para>
+    <para>在下一步中，您可以指定：</para>
 
     <itemizedlist>
       <listitem>
-        <para><emphasis>Allow users to manage the connection</emphasis></para>
+        <para><emphasis>允许用户控制连接</emphasis></para>
       </listitem>
 
       <listitem>
-        <para><emphasis>Start the connection at boot</emphasis></para>
+        <para><emphasis>系统启动时自动连接</emphasis></para>
       </listitem>
 
       <listitem>
-        <para><emphasis>Enable traffic accounting</emphasis></para>
+        <para><emphasis>启用流量计费</emphasis></para>
       </listitem>
 
       <listitem>
-        <para><emphasis>Allow interface to be controlled by Network Manager</emphasis></para>
+        <para><emphasis>允许 Network Manager 管理接口</emphasis></para>
       </listitem>
 
       <listitem>
-        <para>In the case of a wireless connection, a supplemental box is <emphasis>Allow
-access point roaming</emphasis> which give the possibility to switch
-automatically between access point according to the signal strength.</para>
+        <para>对于无线连接，<emphasis>允许接入点漫游</emphasis>选项可以让您根据信号强度自动选择接入点。</para>
       </listitem>
     </itemizedlist>
 
-    <para>With the advanced button, you can specify:</para>
+    <para>高级按钮用于指定：</para>
 
     <itemizedlist>
       <listitem>
-        <para>Metric (10 by default)</para>
+        <para>跃点数（Metric，默认为 10）</para>
       </listitem>
 
       <listitem>
@@ -775,8 +720,7 @@ automatically between access point according to the signal strength.</para>
       </listitem>
     </itemizedlist>
 
-    <para>The last step allows you to specify if the connection is to start
-immediately or not.</para>
+    <para>在最后一步中，您可以指定是否在系统启动时启用该连接。</para>
 
     <mediaobject>
       <imageobject>
diff --git a/docs/mcc-help/zh_CN/drakconsole.xml b/docs/mcc-help/zh_CN/drakconsole.xml
index 25a70bb8..790ed3ab 100644
--- a/docs/mcc-help/zh_CN/drakconsole.xml
+++ b/docs/mcc-help/zh_CN/drakconsole.xml
@@ -11,10 +11,7 @@
     </imageobject>
   </mediaobject>
 
-  <para>This tool<footnote>
-      <para>You can start this tool from the command line, by typing <emphasis
-role="bold">drakconsole</emphasis> as root.</para>
-    </footnote> gives you access to a console
-which is directly opened as root. We do not think that you need more
-information about that.</para>
+  <para>此工具<footnote>
+      <para>您可以从命令行启动该程序：请以 root 权限执行 <emphasis role="bold">drakconsole</emphasis>。</para>
+    </footnote>可以让您以 root 身份直接访问终端。请慎重使用该工具。</para>
 </section>
\ No newline at end of file
diff --git a/docs/mcc-help/zh_CN/drakdisk.xml b/docs/mcc-help/zh_CN/drakdisk.xml
index d21c2e98..2ca8ed44 100644
--- a/docs/mcc-help/zh_CN/drakdisk.xml
+++ b/docs/mcc-help/zh_CN/drakdisk.xml
@@ -4,7 +4,7 @@
   <info>
     <title xml:id="drakdisk-ti1">管理磁盘分区</title>
 
-    <subtitle>drakdisk or diskdrake</subtitle>
+    <subtitle>drakdisk 或 diskdrake</subtitle>
   </info>
 
   <mediaobject>
@@ -14,19 +14,13 @@
   </mediaobject>
 
   <warning>
-    <para>This tool<footnote>
-        <para>You can start this tool from the command line, by typing <emphasis
-role="bold">drakdisk</emphasis> or <emphasis
-role="bold">diskdrake</emphasis> as root.</para>
-      </footnote> is very powerful, a tiny
-error or a cat jumping on your keyboard can lead to losing all data on a
-partition or even to erasing the entire hard disk. For that reason, you'll
-see the screen above on top of the tool screen. Click on
-<emphasis>Exit</emphasis> if you're not sure you want to continue.</para>
+    <para>此工具<footnote>
+        <para>您可以从命令行启动该程序：请以 root 权限执行 <emphasis role="bold">drakdisk</emphasis> 或
+<emphasis role="bold">diskdrake</emphasis>。</para>
+      </footnote>非常强大，如果您在操作时稍不留神就可能导致分区或整个硬盘上的数据丢失。因此，您在启动该工具时会看到以上警示。如果您不希望继续操作，请点击<emphasis>退出</emphasis>。</para>
   </warning>
 
-  <para>If you have more than one hard disk, you can switch to the hard disk you
-want to work on by selecting the correct tab (sda, sdb, sdc etc).</para>
+  <para>如果您有多个磁盘，则可以在选项卡中选择当前所操作的磁盘（sda、sdb、sdc 等）。</para>
 
   <mediaobject>
     <imageobject>
@@ -34,35 +28,24 @@ want to work on by selecting the correct tab (sda, sdb, sdc etc).</para>
     </imageobject>
   </mediaobject>
 
-  <para>You can choose from many actions to adjust your hard disk to your
-preferences. Wiping an entire hard disk, splitting or merging partitions,
-resizing them or changing the filesystem, formatting or viewing what is in a
-partition: it is all possible. The <emphasis><guibutton>Clear
-all</guibutton></emphasis> button at the bottom is to erase the complete
-disk, the other buttons become visible on the right after you click on a
-partition.</para>
+  <para>您可以使用诸多操作来调整磁盘分区，如：擦除整个硬盘、分割或合并分区、改变分区大小、更改文件系统、格式化或查看分区内容。底部的<emphasis><guibutton>清除所有数据</guibutton></emphasis>按钮用于擦除整个硬盘；在点击特定分区后，您还可以使用其他按钮所对应的功能。</para>
 
  
 
   <!-- 2015-07-06 Note added by Lebarhon -->
 <note>
-    <para>If you have an UEFI system, you can see a small partition called "EFI System
-Partition" and mounted on /boot/EFI. Never delete it, because it contains
-all your different operating systems bootloaders.</para>
+    <para>如果您使用 UEFI 硬件，您将看到一个名为“EFI 系统分区”的小分区，它被挂载至
+/boot/EFI。请不要删除它。因为它包含了系统启动所必须的引导器。</para>
   </note>
 
-  <para>If the selected partition is mounted, like in the example below, you cannot
-choose to resize, format or delete it. To be able to do that the partition
-must be unmounted first.</para>
+  <para>如果所选分区已被挂载，如下例所示，您将无法更改其大小、格式化或删除它。若要对此分区进行操作，请先将其卸载。</para>
 
-  <para>It is only possible to resize a partition on its right side</para>
+  <para>调整分区大小时，只能更改其右侧边界</para>
 
-  <para>To change a partition type (change ext3 to ext4 for example) you have to
-delete the partition and then re-create it with the new type. The button
-<guibutton role="bold">Create</guibutton> appears when a disk empty part is
-selected</para>
+  <para>若要改变分区类型（如从 ext3 改为 ext4），您需要先删除分区，然后创建一个新分区。若您选择了空白区域，<guibutton
+role="bold">创建</guibutton>按钮将会出现。</para>
 
-  <para>You can choose a mount point that doesn't exist, it will be created.</para>
+  <para>您可以将挂载点设为不存在的路径，系统将自动创建它。</para>
 
   <mediaobject>
     <imageobject>
@@ -70,9 +53,7 @@ selected</para>
     </imageobject>
   </mediaobject>
 
-  <para>Selecting <emphasis><guibutton>Toggle to expert mode</guibutton></emphasis>
-gives some extra available actions, like labeling the partition, as can be
-seen in the screenshot below.</para>
+  <para>选择<emphasis><guibutton>切换专家模式</guibutton></emphasis>后，程序将显示额外的可用操作，如设置分区标签，如以下截图所示。</para>
 
   <mediaobject>
     <imageobject>
diff --git a/docs/mcc-help/zh_CN/drakedm.xml b/docs/mcc-help/zh_CN/drakedm.xml
index 0327542e..34744ff5 100644
--- a/docs/mcc-help/zh_CN/drakedm.xml
+++ b/docs/mcc-help/zh_CN/drakedm.xml
@@ -14,14 +14,10 @@
     </imageobject>
   </mediaobject>
 
-  <para revision="1" xml:id="drakedm-pa1">Here<footnote>
-      <para revision="1" xml:id="drakedm-pa3">You can start this tool from the command line, by typing <emphasis
-role="bold">drakedm</emphasis> as root.</para>
-    </footnote> you can choose which display
-manager to use to log into your desktop environment. Only the ones available
-on your system will be shown.</para>
+  <para revision="1" xml:id="drakedm-pa1">您可以在这里<footnote>
+      <para revision="1" xml:id="drakedm-pa3">你可通过以root用户在命令行输入 <emphasis role="bold">drakedm</emphasis> 启动该工具。</para>
+    </footnote>选择需要使用的显示管理器，以便登录到桌面环境。系统只显示可用的显示管理器。</para>
 
-  <para revision="1" xml:id="drakedm-pa2">Most users will only notice that the provided login screens look
-different. However, there are differences in supported features, too. LXDM
-is a lightweight display manager, KDM and GDM have more extras.</para>
+  <para revision="1" xml:id="drakedm-pa2">多数用户对于登录界面的风格不会过多关注。不过，它们之间确实有一些特性上的差异，如：LXDM 是轻量级的显示管理器，而 KDM 和 GDM
+则包含了诸多附加功能。</para>
 </section>
\ No newline at end of file
diff --git a/docs/mcc-help/zh_CN/drakfirewall.xml b/docs/mcc-help/zh_CN/drakfirewall.xml
index 146832ef..1a0793bc 100644
--- a/docs/mcc-help/zh_CN/drakfirewall.xml
+++ b/docs/mcc-help/zh_CN/drakfirewall.xml
@@ -11,34 +11,23 @@
     </imageobject>
   </mediaobject>
 
-  <para>This tool<footnote>
-      <para>You can start this tool from the command line, by typing <emphasis
-role="bold">drakfirewall</emphasis> as root.</para>
-    </footnote> is found under the Security
-tab in the Mageia Control Center labelled "Set up your personal
-firewall". It is the same tool in the first tab of "Configure system
-security, permissions and audit".</para>
+  <para>此工具<footnote>
+      <para>你可通过以root用户在命令行输入 <emphasis role="bold">drakfirewall</emphasis> 启动该工具。</para>
+    </footnote>可以在 Mageia
+控制中心的系统选项卡中找到，选项名称是“设置个人防火墙”。它与第一个选项卡中的“配置系统安全、权限和审计”是同一个工具。</para>
 
-  <para>A basic firewall is installed by default with Mageia. All the incoming
-connections from the outside are blocked if they aren't authorised. In the
-first screen above, you can select the services for which outside connection
-attempts are accepted. For your security, uncheck the first box -
-<guilabel>Everything (no firewall)</guilabel> - unless you want to disable
-the firewall, and only check the needed services.</para>
+  <para>Mageia
+默认安装了基本的防火墙。所有未经授权的外部连接都会被拒绝。在以上第一个窗口，您可以选择要接受的外部连接所对应的服务。除非您希望禁用防火墙，否则为了安全起见，请不要勾选第一个方框<guilabel>所有（无防火墙）</guilabel>，而只勾选所需的服务。</para>
 
-  <para>It is possible to manually enter the port numbers to open. Click on
-<guibutton>Advanced</guibutton> and a new window is opened. In the field
-<guilabel>Other ports</guilabel>, enter the needed ports following these
-examples :</para>
+  <para>可以手动输入您希望开放的端口号。请点击<guibutton>高级</guibutton>，然后在弹出的新窗口中的<guilabel>其他端口</guilabel>中输入所需端口，如下例所示：</para>
 
-  <para>80/tcp : open the port 80 tcp protocol</para>
+  <para>80/tcp：开放 80 端口的 TCP 协议</para>
 
-  <para>24000:24010/udp : open all the ports from 24000 to 24010 udp protocol</para>
+  <para>24000:24010/udp : 开放 4000 至 24010 端口的 UDP 协议</para>
 
-  <para>The listed ports should be separated by a space.</para>
+  <para>不同的端口号间使用空格分隔。</para>
 
-  <para>If the box <guilabel>Log firewall messages in system logs</guilabel> is
-checked, the firewall messages will be saved in system logs</para>
+  <para>若勾选了<guilabel>将防火墙消息记录到系统日志</guilabel>，防火墙的相关消息将会保存至系统日志</para>
 
   <mediaobject>
     <imageobject>
@@ -47,21 +36,13 @@ checked, the firewall messages will be saved in system logs</para>
   </mediaobject>
 
   <note>
-    <para>If you don't host specific services (web or mail server, file sharing, ...)
-it is completely possible to have nothing checked at all, it is even
-recommended, it won't prevent you from connecting to the internet.</para>
+    <para>如果您不打算用计算机提供特定服务（网页、邮件服务器、文件共享等），我们建议您不要勾选任何项目，而且这并不会影响到您的互联网连接。</para>
   </note>
 
-  <para>The next screen deals with the Interactive Firewall options. These feature
-allow you to be warned of connection attempts if at least the first box
-<guilabel>Use Interactive Firewall </guilabel>is checked. Check the second
-box to be warned if the ports are scanned (in order to find a failure
-somewhere and enter your machine). Each box from the third one onwards
-corresponds to a port you opened in the two first screens; in the screenshot
-below, there are two such boxes: SSH server and 80:150/tcp. Check them to be
-warned each time a connection is attempted on those ports.</para>
+  <para>下一个窗口用于配置交互式防火墙选项。当勾选了第一项<guilabel>使用交互式防火墙</guilabel>，系统将会在连接发起时弹出警告。若勾选了第二项，则系统在检测到端口扫描（常被用于扫描漏洞并入侵系统）时弹出警告。第三项及其之后的方框用于设置您在前两个窗口中开启的端口；在下面的截图中，系统中启用了
+SSH 服务和 80:150/tcp 端口。请选择要在哪些端口被连接时弹出警告。</para>
 
-  <para>These warning are given by alert popups through the network applet.</para>
+  <para>此警告将由网络应用程序以警示弹窗的形式发出。</para>
 
   <mediaobject>
     <imageobject>
@@ -75,12 +56,9 @@ warned each time a connection is attempted on those ports.</para>
     </imageobject>
   </mediaobject>
 
-  <para>In the last screen, choose which network interfaces are connected to the
-Internet and must be protected. Once the OK button is clicked, the necessary
-packages are downloaded.</para>
+  <para>在最后一个窗口中，请选择需要连接到互联网并且需要保护的网络接口。点击确定按钮后，将会自动下载所需软件包。</para>
 
   <tip>
-    <para>If you don't know what to choose, have a look in MCC tab Network &amp;
-Internet, icon Set up a new network interface.</para>
+    <para>如果您不清楚如何选择，请参考 Mageia 控制中心的“网络和互联网”选项卡中的“设置新的网络接口”。</para>
   </tip>
 </section>
\ No newline at end of file
diff --git a/docs/mcc-help/zh_CN/draknetcenter.xml b/docs/mcc-help/zh_CN/draknetcenter.xml
index e0e6e85d..ae401f60 100644
--- a/docs/mcc-help/zh_CN/draknetcenter.xml
+++ b/docs/mcc-help/zh_CN/draknetcenter.xml
@@ -135,17 +135,13 @@ have to reconnect to the network.</para>
     <para><emphasis role="bold">Allow interface to be controlled by Network
 Manager:</emphasis></para>
 
-    <para>This section hasn't been written yet for lack of resources. If you think you
-can write this help, please contact <link
-ns2:href="https://wiki.mageia.org/en/Documentation_team"> the Doc
-team.</link> Thanking you in advance.</para>
+    <para>由于缺少资源，此部分内容尚未编写。如果您希望编写此帮助，请联系<link
+ns2:href="https://wiki.mageia.org/en/Documentation_team">文档团度</link>。感谢您的支持。</para>
 
     <para><guibutton>The button Advanced:</guibutton></para>
 
-    <para>This section hasn't been written yet for lack of resources. If you think you
-can write this help, please contact <link
-ns2:href="https://wiki.mageia.org/en/Documentation_team"> the Doc
-team.</link> Thanking you in advance.</para>
+    <para>由于缺少资源，此部分内容尚未编写。如果您希望编写此帮助，请联系<link
+ns2:href="https://wiki.mageia.org/en/Documentation_team">文档团度</link>。感谢您的支持。</para>
 
     <mediaobject>
       <imageobject>
@@ -204,10 +200,8 @@ team.</link> Thanking you in advance.</para>
   <section>
     <title>The Advanced Settings button</title>
 
-    <para>This section hasn't been written yet for lack of resources. If you think you
-can write this help, please contact <link
-ns2:href="https://wiki.mageia.org/en/Documentation_team"> the Doc
-team.</link> Thanking you in advance.</para>
+    <para>由于缺少资源，此部分内容尚未编写。如果您希望编写此帮助，请联系<link
+ns2:href="https://wiki.mageia.org/en/Documentation_team">文档团度</link>。感谢您的支持。</para>
 
     <mediaobject>
       <imageobject>