diff options
Diffstat (limited to 'mdk-stage1/rp-pppoe/doc')
| -rw-r--r-- | mdk-stage1/rp-pppoe/doc/CHANGES | 177 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT | 295 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE | 39 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/doc/LICENSE | 339 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/doc/PROBLEMS | 3 |
5 files changed, 0 insertions, 853 deletions
diff --git a/mdk-stage1/rp-pppoe/doc/CHANGES b/mdk-stage1/rp-pppoe/doc/CHANGES deleted file mode 100644 index 9afce027d..000000000 --- a/mdk-stage1/rp-pppoe/doc/CHANGES +++ /dev/null @@ -1,177 +0,0 @@ -Changes from Version 2.8 to 3.0: - -- Many small improvements to server. Server now only makes one - discovery socket, systemwide, with addition of "-n" option to pppoe. - -- Fixes for compilation problems on BSD, Solaris and some Linux platforms. - -- Added "-p" option to pppoe-server to allow you to specify a pool of - IP addresses to assign to clients. - -- Added GUI system (tkpppoe). This work was funded by Iospan - Wireless, Inc. The GUI includes a Set-UID wrapper (pppoe-wrapper) - which allows ordinary users to control a link (if so authorized.) - I believe the wrapper script is secure, but please audit the - source code (gui/wrapper.c) if you have any concerns. - -- Changes to scripts and pppoe.conf. DNS setup is now dynamic (happens - each time adsl-connect runs.) - -- Made relay.c check packet lengths rigorously; made it throw out Ethernet - frame padding on session packets as well as discovery packets. - -Changes from Version 2.7 to 2.8: - -- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi. - -- Made relay.c check packet lengths rigorously; made it throw out Ethernet - frame padding on discovery packets. - -*** NOTE: 2.7 was not released publicly - -Changes from Version 2.6 to 2.7: - -- Completely restructured source file tree. - -- Much internal restructuring to eliminate a bunch of global variables. - -- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped - or cannot be established. - -- Split pppoe.c into pppoe.c and discovery.c. - -- Added relay agent (pppoe-relay). - -- Made adsl-connect script use the "-U" (host-unique) option to better support - multiple PPPoE links. - -- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!) - -- Added "-o" option to PPPoE server; encoded server PID in pppoe-server - cookie. - -Changes from Version 2.5 to 2.6: - -- Code should now compile cleanly on Caldera and Slackware Linux - -- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat. - -- Deleted some obsolete files - -- Fixed bug in Solaris/x86 port (thanks to Philippe Levan) - -- Made shell scripts nicer under Solaris (again, Philippe Levan) - -- Made adsl-status look under /var/run and /etc/ppp for PID files. Should - fix problems with NetBSD. - -- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config - file name. This makes it easier to run multiple PPPoE sessions. - -Changes from Version 2.4 to 2.5: - -- Tested for zero-length TCP option-length field, and for reverse-packing - of type/code bitfields. Thanks to Robert Schlabbach for pointing out - these problems. - -- Set umask to 077 in adsl-setup.in to protect created files like - /etc/ppp/pap-secrets. - -Changes from Version 2.3 to 2.4: - -- Fixed spec file to automatically add .gz extension to man files as required - -- Tightened firewall rules. - -- Better check for /var/run in adsl-status; minor shell script fixes and - cleanups for NetBSD and Solaris. - -- Added FAQ to HOW-TO-CONNECT regarding running a script each time a - connection is made. - -Changes from Version 2.2 to 2.3: - -- Fixed the init script to create/remove /var/lock/subsys/adsl (patch - courtesy of Charley Carter.) - -- Added support (under Linux) for N_HDLC line discipline which should - greatly reduce CPU usage. My tests show it cuts CPU usage in half. - My 486 DX2/66 gets 800 kb/s at 22% CPU usage. - -- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill - its caller. There is (IMO) a bug in pppd which kills all processes in - its process group if the "pty" option is used. The setsid program gets - around this bug, on Linux at least. - -- Port to Solaris, courtesy of David Holland. - -- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups. - NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM - compress man pages automatically. You may have problems building RPM's - from source unless you get the latest rpm package and make sure it - compresses man pages. - -Changes from Version 2.1 to 2.2: - -- Added "-f" option to pppoe to allow use of any Ethernet frame type - for PPPoE. USE WITH CAUTION -- this is a workaround for broken DSL - providers, not something you should monkey with freely! - -- Added pppoe-sniff program to help expose non-standard PPPoE implementations. - -Changes from Version 2.0 to 2.1: - -- Fixed minor bugs in bounds-checking - -- Modified adsl-status to use output of "netstat -r -n" to determine whether - or not link is up. This should make it independent of locale, I hope! - -- Added "-k" and "-d" options to pppoe. - -Changes from Version 1.9 to 2.0: - -- Addition of pppoe-server - -- Massive internal code restructuring - -- Zealous bounds-checking everywhere. - -- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets. - -- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram - and Yannis Sismanis. - -- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann. - -- Fixed bug in which Host-Uniq did not work if access concentrator sent - a cookie. - -- Addition of SuSE-specific "init" script, courtesy of Gary Cameron. - -Changes from Version 1.8 to 1.9: - -- Added some more documentation to HOW-TO-CONNECT - -- Demand-dialling option now works correctly - -- SIGHUP terminates pppoe after sending a PADT to the access concentrator - -- Minor cleanups to connection shell scripts - -Changes from Version 1.7 to 1.8: - -- Added demand-dialling option - -- Clarified HOW-TO-CONNECT - -- Added adsl-status script - -- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script - -- Made adsl-setup check for existence of pppd - -- Wildcarded external interface in firewall rules - -- Made pppoe send a PADT frame if connection is terminated - -$Id$ diff --git a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT b/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT deleted file mode 100644 index 3e888af69..000000000 --- a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT +++ /dev/null @@ -1,295 +0,0 @@ -$Id$ - -This package lets you connect a Linux machine to Sympatico HSE or Magma's -high-speed service using a Nortel 1-meg modem. - -Follow these steps and you should have your high-speed service up and running. - -0. Install the rp-pppoe-software --------------------------------- - -You should have already done this by the time you're reading this. If not, -go back and read README. - -1. Set up your Ethernet hardware --------------------------------- - -First, make sure the Ethernet card you intend to use with the modem is -visible to the Linux kernel. Just how to do this is beyond the scope -of this document. However, if the card is the only Ethernet card in -the system, executing: - - ifconfig eth0 - -should display something like this: - - eth0 Link encap:Ethernet HWaddr 00:60:67:62:31:D4 - -plust some more lines. Your HWaddr will be different. As long as you see -the HWaddr line, your card should be working. - -DO NOT assign an IP address to the Ethernet card. DO NOT configure the -card to come up at boot time. - -2. Configure various files --------------------------- - -Several files need editing. The easiest way to do this is to run -the following command as root: - - adsl-setup - -Answer the questions and you should be all set. If you want to know what -goes on behind the scenes, continue reading this document. If you don't -care and your connection works, stop reading. :-) - -3. Edit pap-secrets -------------------- - -Edit the "pap-secrets" file, inserting your proper user-ID and password. -Install the file (or copy the relevant lines) to /etc/ppp/pap-secrets. -Your ISP may use CHAP authentication. In this case, add the line to -/etc/ppp/chap-secrets. - -4. Edit /etc/ppp/pppoe.conf ------------------------------ - -The file /etc/ppp/pppoe.conf contains configuration information for the -ADSL connection. You need to edit the following items: - -- Change ETH=eth1 to the correct Ethernet device for your modem. -- Change USER=bxxxnxnx@sympatico.ca to your proper ADSL user-ID. - -Don't edit any of the other settings unless you're an expert. - -5. Set up DNS -------------- - -If you are using DNS servers supplied by your ISP, edit the file -/etc/resolv.conf to contain these lines: - - nameserver ip_addr_of_first_dns_server - nameserver ip_addr_of_second_dns_server - -For example: - - nameserver 204.101.251.1 - nameserver 204.101.251.2 - - -6. Firewall your machine ------------------------- - -MAKE SURE YOU FIREWALL YOUR MACHINE. A sample firewall script is given -in the shell script "firewall" To install the script: - -a) Copy it to /etc/rc.d/init.d/firewall -b) Type: chkconfig firewall on -c) Start the firewall: sh /etc/rc.d/init.d/firewall start - -(The above procedure works ONLY on Red Hat-like systems.) - -You may want to tweak the script somewhat. - -7. Bring up the connection at boot time ---------------------------------------- - -On a Red Hat system, the installation procedure should have installed -a script called /etc/rc.d/init.d/adsl. To bring up the connection -at boot time, just type this command as root: - - chkconfig --add adsl - -On non-Red-Hat systems, add this line to the end -of /etc/rc.d/rc.local: - - /usr/sbin/adsl-start - -8. Configure LAN Hosts ----------------------- - -If you have a LAN behind the firewall, you have to lower the TCP -maximum segment size from the normal 1460 to 1452 (or better, 1412.) -You have two options: Either set the MTU of all the interfaces on -other hosts on the LAN to 1452, or use the "-m 1412" option to pppoe. -The "-m" option for pppoe is far simpler and makes it easier to add -hosts to the LAN, but consumes some extra CPU time. - -If you want to manually configure the LAN hosts, here's how: - -In Linux, use: "ifconfig eth0 mtu 1452". For best results, put this -in an /etc/rc.d/rc.local script. - -For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm. -Set the MaxMTU to 1452. - -9. Commands to control the ADSL link ------------------------------------- - -As root, bring up the link by typing: adsl-start -As root, bring down the link by typing: adsl-stop - -That's it! - --- -David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc. -http://www.roaringpenguin.com | Linux and UNIX Specialists - -PROBLEMS! DAVE, IT DOESN'T WORK! ---------------------------------- - -Here are some problems PPPoE users have encountered. - ------------------------------------------------------------------------------ -A) Can't see the Ethernet interface - -Well, I can't really help you here. To use these instructions, you must -have Linux working to the point where it recognizes your Ethernet card. -If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet -card is probably OK. But I really can't help with hardware configuration -issues. - ------------------------------------------------------------------------------ -B) Connection seems to come up, but I can't browse the web or ping anything - -You probably don't have DNS set up. See step 6. - ------------------------------------------------------------------------------ -C) Can't compile PPPoE - -I have only tested compilation on 2.2-kernel machines. Make sure you have -"make", the C compiler and all development header files installed. - ------------------------------------------------------------------------------ -D) pppd complains about (i) "unknown option pty" or (ii) "pty option precludes - specifying device name" - -(i) Your pppd is too old. You need at least 2.3.7. -(ii) Your /etc/ppp/options file is not empty. Empty it! - ------------------------------------------------------------------------------ -E) pppoe dies with the log message "Message too long" - -You set the MTU of the Ethernet interface connected to the ADSL modem -to less than 1500. Don't do that. - ------------------------------------------------------------------------------ -F) Internal hosts can't see the Internet - -Do you have masquerading set up? I can't help you in great detail, but -see the IPCHAINS-HOWTO and the IP-Masquerade mini-HOWTO. - ------------------------------------------------------------------------------ -G) Authentication fails - -Make sure you have the right secret in /etc/ppp/pap-secrets. Your ISP -may be using CHAP; it won't hurt to copy the line to /etc/ppp/chap-secrets. - -Also, MAKE SURE that /etc/ppp/options is EMPTY. The "adsl-connect" script -supplies all required options on the command line; additional options -in /etc/ppp/options may mess things up. - ------------------------------------------------------------------------------ -H) VPN software does not work - -If you are using VPN software on a Windows or Linux machine with another -Linux machine running PPPoE as the gateway, you MUST NOT use the "-m" option -to pppoe. This alters IP packets, which will break any VPN which uses IPSec. -In /etc/ppp/pppoe.conf, set CLAMPMSS to "no". You'll also have to reduce -the MTU on the hosts behind the gateway to 1452. - ------------------------------------------------------------------------------ -I) I can browse some web sites just fine, but others stall forever. - -There is probably a buggy router or firewall between you and the Web server. -One possible workaround: In /etc/ppp/pppoe.conf, find the line which reads: - - CLAMPMSS=1412 - -Try lowering the 1412 until it works (go down in steps of 100 or so.) Each -time you lower the value, you have to restart your connection like this: - - adsl-stop; adsl-start - -This should work around buggy routers which do not support Path MTU discovery. - ------------------------------------------------------------------------------ -J) Whenever I connect using ADSL, my internal LAN no longer sees the gateway - -You are more than likely running a 2.0.X Linux kernel. To solve this -problem, give the Ethernet card connected to the DSL modem a fake IP -address. For example, if eth0 is your internal LAN card and eth1 goes to -the DSL modem, do something like this: - - ifconfig eth1 10.0.0.1 netmask 255.255.255.0 - -(You may have to choose a different IP address; experiment.) ------------------------------------------------------------------------------ -K) How can I run a script every time I connect and get a new IP address? - -Put the script in /etc/ppp/ip-up. See the pppd(8) man page. ------------------------------------------------------------------------------ -L) Nothing works! - -You may need to put your Ethernet card in half-duplex, 10Mb/s mode to -work with the DSL modem. You may have to run a DOS program to do this, -or pass special parameters to the Linux driver. - -Some providers object to attempts to set the MRU or MTU. Try removing -"mtu 1492 mru 1492" from PPP_STD_OPTIONS in the adsl-connect script. -This problem has been seen with an ISP in Hong Kong. - -Your DSL provider may be using non-standard PPPoE frames or require -something special in the Service-Name field. If you have two computers, -you can try sniffing out these values with the "pppoe-sniff" program. -Type "man pppoe-sniff" for details. If you don't have two computers, -you'll have to ask your DSL provider if it uses non-standard PPPoE frames -or special Service-Name fields. Good luck getting an answer... - -If pppoe-sniff indicates that nothing is amiss, make sure the Ethernet -card associated with the ADSL modem does NOT have a valid IP address. -(NOTE: For 2.0 kernels, you may have to give it a fake IP address -which is not on your internal subnet. Something like 192.168.42.42 -might work if you are not using 192.168.42.*) - -If you are using synchronous PPP on a slow machine, try switching to -asynchronous PPP. - -Make sure no entries in the routing table go through the Ethernet card -connected to the ADSL modem. You might want to add these lines in -adsl-connect: - - ifconfig ethx down - ifconfig ethx up mtu 1500 - -which should reset things to sane values. - -####################################################################### -# WHEN ALL ELSE FAILS: # -####################################################################### - -If you are completely unable to connect, run the adsl-start script in -debugging mode. If you are using bash as your shell (if you don't -know what your shell is, it's probably bash), type this: - - DEBUG=1 adsl-start - -In tcsh or csh, use: - - setenv DEBUG 1; adsl-start - -Then follow the instructions to mail the debugging file to me. PLEASE -DON'T DO THIS until you have exhausted all other avenues; rp-pppoe is -free software and it costs me time and money to help people with -problems. While I don't mind doing this, I do mind it if you don't -make an effort to fix the problem yourself first. - -WARNING: If you run adsl-start in debugging mode and you manage to -connect, your connection will be extremely slow and huge amounts of -data will quickly fill your /tmp directory. Do not use debugging mode -unless you really cannot get your connection to work. - -Be aware that debugging mode produces hex dumps which potentially reveal -your user name and password. If the debugging output includes packets -labeled "PPPOE Session", you may wish to remove these packets from the -dump before mailing it to me. diff --git a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE b/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE deleted file mode 100644 index 454c4b870..000000000 --- a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE +++ /dev/null @@ -1,39 +0,0 @@ -RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4.x. However, -the default "./go" build procedure does not make kernel-mode support. - -Here's what you need to do: - -1) Download Michal Ostrowski's patched version of pppd which supports -a PPPoE plugin. The latest version as of this writing is -at http://www.math.uwaterloo.ca/~mostrows/ in -http://www.math.uwaterloo.ca/~mostrows/ppp-2.4.0-pppoe4.tgz. It is -also mirrored at http://www.roaringpenguin.com/pppoe/ - -2) Unpack that version of pppd and build and install it. - -3) In the rp-pppoe directory, change to src/ and type: - - ./configure --enable-plugin=/path/to/ppp-tree - -Here, /path/to/ppp-tree is where you unpacked the pppd software. It -should be the directory named ppp-2.4.0.pppoe - -4) Type make; make install - -5) Edit /etc/ppp/pppoe.conf to include this line: - - LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so - -6) Make sure your kernel was built with support for PPP, PPPOX and that -all modules are locatable by modprobe. Make sure you have a /dev/ppp -device: - - mknod /dev/ppp c 108 0 - -After that, adsl-start should use kernel-mode PPPoE. - -This code is experimental and unsupported. Use at your own risk. - --- -David F. Skoll <dfs@roaringpenguin.com> - diff --git a/mdk-stage1/rp-pppoe/doc/LICENSE b/mdk-stage1/rp-pppoe/doc/LICENSE deleted file mode 100644 index 9ed341535..000000000 --- a/mdk-stage1/rp-pppoe/doc/LICENSE +++ /dev/null @@ -1,339 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 675 Mass Ave, Cambridge, MA 02139, USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - Appendix: How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) 19yy <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/mdk-stage1/rp-pppoe/doc/PROBLEMS b/mdk-stage1/rp-pppoe/doc/PROBLEMS deleted file mode 100644 index f0b7d7d59..000000000 --- a/mdk-stage1/rp-pppoe/doc/PROBLEMS +++ /dev/null @@ -1,3 +0,0 @@ -Problems? - -See the last section of HOW-TO-CONNECT. |