This commit was manufactured by cvs2svn to create tag 'V1_1_8_16mdk'.V1_1_8_16mdk

5 files changed, 0 insertions, 853 deletions

diff --git a/mdk-stage1/rp-pppoe/doc/CHANGES b/mdk-stage1/rp-pppoe/doc/CHANGES
deleted file mode 100644
index 9afce027d..000000000
--- a/mdk-stage1/rp-pppoe/doc/CHANGES
+++ /dev/null
@@ -1,177 +0,0 @@
-Changes from Version 2.8 to 3.0:
-
-- Many small improvements to server.  Server now only makes one
-  discovery socket, systemwide, with addition of "-n" option to pppoe.
-
-- Fixes for compilation problems on BSD, Solaris and some Linux platforms.
-
-- Added "-p" option to pppoe-server to allow you to specify a pool of
-  IP addresses to assign to clients.
-
-- Added GUI system (tkpppoe).  This work was funded by Iospan
-  Wireless, Inc.  The GUI includes a Set-UID wrapper (pppoe-wrapper)
-  which allows ordinary users to control a link (if so authorized.)
-  I believe the wrapper script is secure, but please audit the
-  source code (gui/wrapper.c) if you have any concerns.
-
-- Changes to scripts and pppoe.conf.  DNS setup is now dynamic (happens
-  each time adsl-connect runs.)
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on session packets as well as discovery packets.
-
-Changes from Version 2.7 to 2.8:
-
-- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi.
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on discovery packets.
-
-*** NOTE: 2.7 was not released publicly
-
-Changes from Version 2.6 to 2.7:
-
-- Completely restructured source file tree.
-
-- Much internal restructuring to eliminate a bunch of global variables.
-
-- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped
-  or cannot be established.
-
-- Split pppoe.c into pppoe.c and discovery.c.
-
-- Added relay agent (pppoe-relay).
-
-- Made adsl-connect script use the "-U" (host-unique) option to better support
-  multiple PPPoE links.
-
-- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!)
-
-- Added "-o" option to PPPoE server; encoded server PID in pppoe-server
-  cookie.
-
-Changes from Version 2.5 to 2.6:
-
-- Code should now compile cleanly on Caldera and Slackware Linux
-
-- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat.
-
-- Deleted some obsolete files
-
-- Fixed bug in Solaris/x86 port (thanks to Philippe Levan)
-
-- Made shell scripts nicer under Solaris (again, Philippe Levan)
-
-- Made adsl-status look under /var/run and /etc/ppp for PID files.  Should
-  fix problems with NetBSD.
-
-- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config
-  file name.  This makes it easier to run multiple PPPoE sessions.
-
-Changes from Version 2.4 to 2.5:
-
-- Tested for zero-length TCP option-length field, and for reverse-packing
-  of type/code bitfields.  Thanks to Robert Schlabbach for pointing out
-  these problems.
-
-- Set umask to 077 in adsl-setup.in to protect created files like
-  /etc/ppp/pap-secrets.
-
-Changes from Version 2.3 to 2.4:
-
-- Fixed spec file to automatically add .gz extension to man files as required
-
-- Tightened firewall rules.
-
-- Better check for /var/run in adsl-status; minor shell script fixes and
-  cleanups for NetBSD and Solaris.
-
-- Added FAQ to HOW-TO-CONNECT regarding running a script each time a
-  connection is made.
-
-Changes from Version 2.2 to 2.3:
-
-- Fixed the init script to create/remove /var/lock/subsys/adsl (patch
-  courtesy of Charley Carter.)
-
-- Added support (under Linux) for N_HDLC line discipline which should
-  greatly reduce CPU usage.  My tests show it cuts CPU usage in half.
-  My 486 DX2/66 gets 800 kb/s at 22% CPU usage.
-
-- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill
-  its caller.  There is (IMO) a bug in pppd which kills all processes in
-  its process group if the "pty" option is used.  The setsid program gets
-  around this bug, on Linux at least.
-
-- Port to Solaris, courtesy of David Holland.
-
-- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups.
-  NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM
-  compress man pages automatically.  You may have problems building RPM's
-  from source unless you get the latest rpm package and make sure it
-  compresses man pages.
-
-Changes from Version 2.1 to 2.2:
-
-- Added "-f" option to pppoe to allow use of any Ethernet frame type
-  for PPPoE.  USE WITH CAUTION -- this is a workaround for broken DSL
-  providers, not something you should monkey with freely!
-
-- Added pppoe-sniff program to help expose non-standard PPPoE implementations.
-
-Changes from Version 2.0 to 2.1:
-
-- Fixed minor bugs in bounds-checking
-
-- Modified adsl-status to use output of "netstat -r -n" to determine whether
-  or not link is up.  This should make it independent of locale, I hope!
-
-- Added "-k" and "-d" options to pppoe.
-
-Changes from Version 1.9 to 2.0:
-
-- Addition of pppoe-server
-
-- Massive internal code restructuring
-
-- Zealous bounds-checking everywhere.
-
-- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets.
-
-- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram
-  and Yannis Sismanis.
-
-- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann.
-
-- Fixed bug in which Host-Uniq did not work if access concentrator sent
-  a cookie.
-
-- Addition of SuSE-specific "init" script, courtesy of Gary Cameron.
-
-Changes from Version 1.8 to 1.9:
-
-- Added some more documentation to HOW-TO-CONNECT
-
-- Demand-dialling option now works correctly
-
-- SIGHUP terminates pppoe after sending a PADT to the access concentrator
-
-- Minor cleanups to connection shell scripts
-
-Changes from Version 1.7 to 1.8:
-
-- Added demand-dialling option
-
-- Clarified HOW-TO-CONNECT
-
-- Added adsl-status script
-
-- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script
-
-- Made adsl-setup check for existence of pppd
-
-- Wildcarded external interface in firewall rules
-
-- Made pppoe send a PADT frame if connection is terminated
-
-$Id$
diff --git a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT b/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
deleted file mode 100644
index 3e888af69..000000000
--- a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
+++ /dev/null
@@ -1,295 +0,0 @@
-$Id$
-
-This package lets you connect a Linux machine to Sympatico HSE or Magma's
-high-speed service using a Nortel 1-meg modem.
-
-Follow these steps and you should have your high-speed service up and running.
-
-0. Install the rp-pppoe-software
---------------------------------
-
-You should have already done this by the time you're reading this.  If not,
-go back and read README.
-
-1. Set up your Ethernet hardware
---------------------------------
-
-First, make sure the Ethernet card you intend to use with the modem is
-visible to the Linux kernel.  Just how to do this is beyond the scope
-of this document.  However, if the card is the only Ethernet card in
-the system, executing:
-
-	ifconfig eth0
-
-should display something like this:
-
-	eth0      Link encap:Ethernet  HWaddr 00:60:67:62:31:D4  
-
-plust some more lines.  Your HWaddr will be different.  As long as you see
-the HWaddr line, your card should be working.
-
-DO NOT assign an IP address to the Ethernet card.  DO NOT configure the
-card to come up at boot time.
-
-2. Configure various files
---------------------------
-
-Several files need editing.  The easiest way to do this is to run
-the following command as root:
-
-	adsl-setup
-
-Answer the questions and you should be all set.  If you want to know what
-goes on behind the scenes, continue reading this document.  If you don't
-care and your connection works, stop reading. :-)
-
-3. Edit pap-secrets
--------------------
-
-Edit the "pap-secrets" file, inserting your proper user-ID and password.
-Install the file (or copy the relevant lines) to /etc/ppp/pap-secrets.
-Your ISP may use CHAP authentication.  In this case, add the line to
-/etc/ppp/chap-secrets.
-
-4. Edit /etc/ppp/pppoe.conf
------------------------------
-
-The file /etc/ppp/pppoe.conf contains configuration information for the
-ADSL connection.  You need to edit the following items:
-
-- Change ETH=eth1 to the correct Ethernet device for your modem.
-- Change USER=bxxxnxnx@sympatico.ca to your proper ADSL user-ID.
-
-Don't edit any of the other settings unless you're an expert.
-
-5. Set up DNS
--------------
-
-If you are using DNS servers supplied by your ISP, edit the file
-/etc/resolv.conf to contain these lines:
-
-	nameserver ip_addr_of_first_dns_server
-	nameserver ip_addr_of_second_dns_server
-
-For example:
-
-	nameserver 204.101.251.1
-	nameserver 204.101.251.2
-
-
-6. Firewall your machine
-------------------------
-
-MAKE SURE YOU FIREWALL YOUR MACHINE.  A sample firewall script is given
-in the shell script "firewall"  To install the script:
-
-a) Copy it to /etc/rc.d/init.d/firewall
-b) Type: chkconfig firewall on
-c) Start the firewall: sh /etc/rc.d/init.d/firewall start
-
-(The above procedure works ONLY on Red Hat-like systems.)
-
-You may want to tweak the script somewhat.
-
-7. Bring up the connection at boot time
----------------------------------------
-
-On a Red Hat system, the installation procedure should have installed
-a script called /etc/rc.d/init.d/adsl.  To bring up the connection
-at boot time, just type this command as root:
-
-	chkconfig --add adsl
-
-On non-Red-Hat systems, add this line to the end
-of /etc/rc.d/rc.local:
-
-	/usr/sbin/adsl-start
-
-8. Configure LAN Hosts
-----------------------
-
-If you have a LAN behind the firewall, you have to lower the TCP
-maximum segment size from the normal 1460 to 1452 (or better, 1412.)
-You have two options: Either set the MTU of all the interfaces on
-other hosts on the LAN to 1452, or use the "-m 1412" option to pppoe.
-The "-m" option for pppoe is far simpler and makes it easier to add
-hosts to the LAN, but consumes some extra CPU time.
-
-If you want to manually configure the LAN hosts, here's how:
-
-In Linux, use: "ifconfig eth0 mtu 1452".  For best results, put this
-in an /etc/rc.d/rc.local script.
-
-For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm.
-Set the MaxMTU to 1452.
-
-9. Commands to control the ADSL link
-------------------------------------
-
-As root, bring up the link by typing:   adsl-start
-As root, bring down the link by typing: adsl-stop
-
-That's it!
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com           | Linux and UNIX Specialists
-
-PROBLEMS!  DAVE, IT DOESN'T WORK!
----------------------------------
-
-Here are some problems PPPoE users have encountered.
-
------------------------------------------------------------------------------
-A) Can't see the Ethernet interface
-
-Well, I can't really help you here.  To use these instructions, you must
-have Linux working to the point where it recognizes your Ethernet card.
-If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet
-card is probably OK.  But I really can't help with hardware configuration
-issues.
-
------------------------------------------------------------------------------
-B) Connection seems to come up, but I can't browse the web or ping anything
-
-You probably don't have DNS set up.  See step 6.
-
------------------------------------------------------------------------------
-C) Can't compile PPPoE
-
-I have only tested compilation on 2.2-kernel machines.  Make sure you have
-"make", the C compiler and all development header files installed.
-
------------------------------------------------------------------------------
-D) pppd complains about (i) "unknown option pty" or (ii) "pty option precludes
-   specifying device name"
-
-(i) Your pppd is too old.  You need at least 2.3.7.
-(ii) Your /etc/ppp/options file is not empty.  Empty it!
-
------------------------------------------------------------------------------
-E) pppoe dies with the log message "Message too long"
-
-You set the MTU of the Ethernet interface connected to the ADSL modem
-to less than 1500.  Don't do that.
-
------------------------------------------------------------------------------
-F) Internal hosts can't see the Internet
-
-Do you have masquerading set up?  I can't help you in great detail, but
-see the IPCHAINS-HOWTO and the IP-Masquerade mini-HOWTO.
-
------------------------------------------------------------------------------
-G) Authentication fails
-
-Make sure you have the right secret in /etc/ppp/pap-secrets.  Your ISP
-may be using CHAP; it won't hurt to copy the line to /etc/ppp/chap-secrets.
-
-Also, MAKE SURE that /etc/ppp/options is EMPTY.  The "adsl-connect" script
-supplies all required options on the command line; additional options
-in /etc/ppp/options may mess things up.
-
------------------------------------------------------------------------------
-H) VPN software does not work
-
-If you are using VPN software on a Windows or Linux machine with another
-Linux machine running PPPoE as the gateway, you MUST NOT use the "-m" option
-to pppoe.  This alters IP packets, which will break any VPN which uses IPSec.
-In /etc/ppp/pppoe.conf, set CLAMPMSS to "no".  You'll also have to reduce
-the MTU on the hosts behind the gateway to 1452.
-
------------------------------------------------------------------------------
-I) I can browse some web sites just fine, but others stall forever.
-
-There is probably a buggy router or firewall between you and the Web server.
-One possible workaround:  In /etc/ppp/pppoe.conf, find the line which reads:
-
-	CLAMPMSS=1412
-
-Try lowering the 1412 until it works (go down in steps of 100 or so.)  Each
-time you lower the value, you have to restart your connection like this:
-
-	adsl-stop; adsl-start
-
-This should work around buggy routers which do not support Path MTU discovery.
-
------------------------------------------------------------------------------
-J) Whenever I connect using ADSL, my internal LAN no longer sees the gateway
-
-You are more than likely running a 2.0.X Linux kernel.  To solve this
-problem, give the Ethernet card connected to the DSL modem a fake IP
-address.  For example, if eth0 is your internal LAN card and eth1 goes to
-the DSL modem, do something like this:
-
-	ifconfig eth1 10.0.0.1 netmask 255.255.255.0
-
-(You may have to choose a different IP address; experiment.)
------------------------------------------------------------------------------
-K) How can I run a script every time I connect and get a new IP address?
-
-Put the script in /etc/ppp/ip-up.  See the pppd(8) man page.
------------------------------------------------------------------------------
-L) Nothing works!
-
-You may need to put your Ethernet card in half-duplex, 10Mb/s mode to
-work with the DSL modem.  You may have to run a DOS program to do this,
-or pass special parameters to the Linux driver.
-
-Some providers object to attempts to set the MRU or MTU.  Try removing
-"mtu 1492 mru 1492" from PPP_STD_OPTIONS in the adsl-connect script.
-This problem has been seen with an ISP in Hong Kong.
-
-Your DSL provider may be using non-standard PPPoE frames or require
-something special in the Service-Name field.  If you have two computers,
-you can try sniffing out these values with the "pppoe-sniff" program.
-Type "man pppoe-sniff" for details.  If you don't have two computers,
-you'll have to ask your DSL provider if it uses non-standard PPPoE frames
-or special Service-Name fields.  Good luck getting an answer...
-
-If pppoe-sniff indicates that nothing is amiss, make sure the Ethernet
-card associated with the ADSL modem does NOT have a valid IP address.
-(NOTE: For 2.0 kernels, you may have to give it a fake IP address
-which is not on your internal subnet.  Something like 192.168.42.42
-might work if you are not using 192.168.42.*)
-
-If you are using synchronous PPP on a slow machine, try switching to
-asynchronous PPP.
-
-Make sure no entries in the routing table go through the Ethernet card
-connected to the ADSL modem.  You might want to add these lines in
-adsl-connect:
-
-	ifconfig ethx down
-	ifconfig ethx up mtu 1500
-
-which should reset things to sane values.
-
-#######################################################################
-#                        WHEN ALL ELSE FAILS:                         #
-#######################################################################
-
-If you are completely unable to connect, run the adsl-start script in
-debugging mode.  If you are using bash as your shell (if you don't
-know what your shell is, it's probably bash), type this:
-
-	DEBUG=1 adsl-start
-
-In tcsh or csh, use:
-
-	setenv DEBUG 1; adsl-start
-
-Then follow the instructions to mail the debugging file to me.  PLEASE
-DON'T DO THIS until you have exhausted all other avenues; rp-pppoe is
-free software and it costs me time and money to help people with
-problems.  While I don't mind doing this, I do mind it if you don't
-make an effort to fix the problem yourself first.
-
-WARNING: If you run adsl-start in debugging mode and you manage to
-connect, your connection will be extremely slow and huge amounts of
-data will quickly fill your /tmp directory.  Do not use debugging mode
-unless you really cannot get your connection to work.
-
-Be aware that debugging mode produces hex dumps which potentially reveal
-your user name and password.  If the debugging output includes packets
-labeled "PPPOE Session", you may wish to remove these packets from the
-dump before mailing it to me.
diff --git a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE b/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
deleted file mode 100644
index 454c4b870..000000000
--- a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
+++ /dev/null
@@ -1,39 +0,0 @@
-RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4.x.  However,
-the default "./go" build procedure does not make kernel-mode support.
-
-Here's what you need to do:
-
-1) Download Michal Ostrowski's patched version of pppd which supports
-a PPPoE plugin.  The latest version as of this writing is
-at http://www.math.uwaterloo.ca/~mostrows/ in
-http://www.math.uwaterloo.ca/~mostrows/ppp-2.4.0-pppoe4.tgz.  It is
-also mirrored at http://www.roaringpenguin.com/pppoe/
-
-2) Unpack that version of pppd and build and install it.
-
-3) In the rp-pppoe directory, change to src/ and type:
-
-	./configure --enable-plugin=/path/to/ppp-tree
-
-Here, /path/to/ppp-tree is where you unpacked the pppd software.  It
-should be the directory named ppp-2.4.0.pppoe
-
-4) Type make; make install
-
-5) Edit /etc/ppp/pppoe.conf to include this line:
-
-	LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-
-6) Make sure your kernel was built with support for PPP, PPPOX and that
-all modules are locatable by modprobe.  Make sure you have a /dev/ppp
-device:
-
-	mknod /dev/ppp c 108 0
-
-After that, adsl-start should use kernel-mode PPPoE.
-
-This code is experimental and unsupported.  Use at your own risk.
-
---
-David F. Skoll <dfs@roaringpenguin.com>
-
diff --git a/mdk-stage1/rp-pppoe/doc/LICENSE b/mdk-stage1/rp-pppoe/doc/LICENSE
deleted file mode 100644
index 9ed341535..000000000
--- a/mdk-stage1/rp-pppoe/doc/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-        Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/mdk-stage1/rp-pppoe/doc/PROBLEMS b/mdk-stage1/rp-pppoe/doc/PROBLEMS
deleted file mode 100644
index f0b7d7d59..000000000
--- a/mdk-stage1/rp-pppoe/doc/PROBLEMS
+++ /dev/null
@@ -1,3 +0,0 @@
-Problems?
-
-See the last section of HOW-TO-CONNECT.