summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po
diff options
context:
space:
mode:
authorPablo Saratxaga <pablo@mandriva.com>2003-09-16 17:08:46 +0000
committerPablo Saratxaga <pablo@mandriva.com>2003-09-16 17:08:46 +0000
commit158b7107ff1a888bf91aff7e4f4b25cd395302cb (patch)
tree9a59ed972fad1171b2c10b2605e11e05963e3b1f /perl-install/share/po
parentcfd30f11c05ce5b9413018a33d14bef204c3af10 (diff)
downloaddrakx-158b7107ff1a888bf91aff7e4f4b25cd395302cb.tar
drakx-158b7107ff1a888bf91aff7e4f4b25cd395302cb.tar.gz
drakx-158b7107ff1a888bf91aff7e4f4b25cd395302cb.tar.bz2
drakx-158b7107ff1a888bf91aff7e4f4b25cd395302cb.tar.xz
drakx-158b7107ff1a888bf91aff7e4f4b25cd395302cb.zip
updated pot files
Diffstat (limited to 'perl-install/share/po')
-rw-r--r--perl-install/share/po/uz@Cyrl.po586
1 files changed, 328 insertions, 258 deletions
diff --git a/perl-install/share/po/uz@Cyrl.po b/perl-install/share/po/uz@Cyrl.po
index cb27faa68..4ff9c763d 100644
--- a/perl-install/share/po/uz@Cyrl.po
+++ b/perl-install/share/po/uz@Cyrl.po
@@ -8,7 +8,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-uz@Cyrl\n"
-"POT-Creation-Date: 2003-09-09 17:07+0200\n"
+"POT-Creation-Date: 2003-09-16 13:45+0200\n"
"PO-Revision-Date: 2003-09-10 23:11+0200\n"
"Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n"
"Language-Team: Uzbek <uz-li@yahoogroups.com>\n"
@@ -187,7 +187,7 @@ msgstr "Ethernet карта"
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "Параметерлар"
@@ -491,6 +491,11 @@ msgstr ""
msgid "Iraq"
msgstr "Ироқ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "connecting to %s ..."
+msgstr "Bugzilla ёрдамчиси билан алоқа ўрнатилмоқда..."
+
#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
@@ -530,6 +535,16 @@ msgstr "Ўрнатилган шрифтларни қидириш"
msgid "Default desktop"
msgstr "Андоза иш столи"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on %s\n"
+" where you'll find a form to fill in. The information displayed above will "
+"be \n"
+"transferred to that server."
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
@@ -1120,6 +1135,36 @@ msgid ""
"No D-Channel (leased lines)"
msgstr ""
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - /etc/xinetd.d/tftp:\n"
+" \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+" \teach diskless client.\n"
+"\n"
+" \tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \tservice tftp\n"
+"\t\t\t{\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t}\n"
+" \t\t\n"
+" \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \tputs its images."
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
@@ -1711,16 +1756,16 @@ msgstr ""
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Belgilash uchun %c va %c tugmalaridan foydalaning."
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "2 тугмали андоза сичқонча"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Enable \"%s\" to execute the file"
+msgstr ""
+
#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
@@ -2752,6 +2797,23 @@ msgstr "Бу ўрнатилиши шарт бўлган пакет, уни та
#: ../../standalone/drakTermServ:1
#, c-format
+msgid ""
+" - Create etherboot floppies/CDs:\n"
+" \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+" \tor CD to initate the boot sequence. drakTermServ will help "
+"generate these\n"
+" \timages, based on the NIC in the client machine.\n"
+" \t\t\n"
+" \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""
@@ -3140,22 +3202,6 @@ msgstr "Файлларни яшириш"
msgid "Auto-detect printers connected to this machine"
msgstr "Бу компютерга уланган принтерларни автоматик равишда аниқлаш"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
@@ -3674,6 +3720,15 @@ msgstr ""
msgid "Restore From Tape"
msgstr "Магнит тасмасидан тиклаш"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid ""
+"To submit a bug report, click the report button, which will open your "
+"default browser\n"
+"to Anthill where you will be able to upload the above information as a bug "
+"report."
+msgstr ""
+
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
@@ -3807,7 +3862,7 @@ msgstr ""
msgid "Need hostname, username and password!"
msgstr "Компютернинг номи, фойдаланувчи ва махфий сўз керак!"
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid "Insert floppy"
msgstr "Дискетни қўйинг"
@@ -3947,11 +4002,6 @@ msgstr "Тармоқ интерфейси аллақачон мосланган"
msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Bugzilla ёрдамчиси билан алоқа ўрнатилмоқда..."
-
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
@@ -4130,6 +4180,11 @@ msgstr "Қабул қилиш"
msgid "Description"
msgstr "Таърифи"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Please enter summary text."
+msgstr ""
+
#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
@@ -4969,7 +5024,7 @@ msgstr ""
msgid "Right Control key"
msgstr "Ўнг Ctrl тугмаси"
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -5934,6 +5989,22 @@ msgstr ""
msgid "busmouse"
msgstr ""
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Create Etherboot Enabled Boot Images:\n"
+" \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+" \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+" \tinterface to help manage/customize these images. To create the "
+"file \n"
+" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+" \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
@@ -6290,24 +6361,6 @@ msgstr ""
msgid "Floppy"
msgstr "Дискет"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
@@ -6854,6 +6907,11 @@ msgstr ""
msgid "Choose file"
msgstr "Файлни танлаш"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Summary: "
+msgstr "Ҳисобот"
+
#: ../../network/shorewall.pm:1
#, c-format
msgid ""
@@ -6926,6 +6984,17 @@ msgstr "Франциянинг Жанубий Ерлари"
msgid "the vendor name of the processor"
msgstr "Процессорни ишлаб чиқарган фирманинг номи"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Maintain %s:\n"
+" \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+" \thelps in this respect by adding or removing system users from this "
+"file."
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
@@ -7219,6 +7288,11 @@ msgstr "Фойдаланувчиларни тиклаш"
msgid "Encryption key for %s"
msgstr "%s учун кодлаш калити"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you want to recover your system?"
+msgstr "aboot дастуридан фойдаланишни истайсизми?"
+
#: ../../services.pm:1
#, c-format
msgid ""
@@ -7645,6 +7719,11 @@ msgstr "/CUPS'ни _мослаш"
msgid ", "
msgstr ", "
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit lspci"
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected host/network"
@@ -7868,6 +7947,11 @@ msgstr ""
"\n"
"Мен шу адаптер билан локал тармоғингизни ўрнатаман."
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Submit cpuinfo"
+msgstr ""
+
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
@@ -7878,6 +7962,11 @@ msgstr "Минимал ўрнатиш"
msgid "Ethiopia"
msgstr "Эфиопия"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "YES"
+msgstr ""
+
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
@@ -8162,13 +8251,6 @@ msgstr "Ўрнатишнинг тури"
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "\"%s\" принтер \"%s\" SMB/Windows серверида"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-
#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
@@ -8473,6 +8555,11 @@ msgstr "Мониторнинг HorizSync: %s\n"
msgid "Path"
msgstr "Йўл"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "NOT FOUND"
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -9019,18 +9106,6 @@ msgstr "муҳим"
msgid "Total Progress"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
#: ../../help.pm:1
#, c-format
msgid ""
@@ -9144,6 +9219,26 @@ msgstr "Мослаш бажарилди, мосламаларни қўллашн
msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Maintain /etc/dhcpd.conf:\n"
+" \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+" \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+" \tthese entries.\n"
+"\t\t\t\n"
+" \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+
#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
@@ -9259,6 +9354,13 @@ msgstr ""
"матн ойнасининг х координатаси\n"
"белгилар сонида"
+#: ../../fsedit.pm:1
+#, c-format
+msgid ""
+"You may not be able to install lilo (since lilo doesn't handle a LV on "
+"multiple PVs)"
+msgstr ""
+
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
@@ -9522,6 +9624,16 @@ msgstr "Хостнинг ҳоми керак"
msgid "Unselect fonts installed"
msgstr "Ўрнатилган шрифтларни белгилашни бекор қилиш"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Ғилдиракли"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Submit kernel version"
+msgstr "Интернет станция"
+
#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
@@ -9543,11 +9655,6 @@ msgstr "Бекор қилиш"
msgid "Searching for configured scanners ..."
msgstr "Мосланган сканнерлар қидирилмоқда..."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Ғилдиракли"
-
#: ../../harddrake/data.pm:1
#, c-format
msgid "Videocard"
@@ -9613,6 +9720,11 @@ msgstr "Андоза"
msgid "Button 2 Emulation"
msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Please enter a package name."
+msgstr "Илтимос фойдаланувчининг исмини киритинг"
+
#: ../../security/l10n.pm:1
#, c-format
msgid "Run chkrootkit checks"
@@ -9696,6 +9808,11 @@ msgstr ""
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
+#: ../../install_messages.pm:1
+#, c-format
+msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgstr "http://www.mandrakelinux.com/en/92errata.php3"
+
#: ../../lang.pm:1
#, c-format
msgid "Honduras"
@@ -9842,6 +9959,45 @@ msgstr "Файл системанинг кодлаш калити"
msgid "Gujarati"
msgstr "Гужарати"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+" a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+" of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+" Note: The '#type' entry is only used by drakTermServ. Clients can "
+"either be 'thin'\n"
+" or 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+" most software on the client machine. A special inittab, %s is\n"
+" written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+" modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+" using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+" subnet.\n"
+"\t\t\t\n"
+" Note: The '#hdw_config' entry is also only used by drakTermServ. "
+"Clients can either \n"
+" be 'true' or 'false'. 'true' enables root login at the client "
+"machine and allows local \n"
+" hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+" by creating separate config files associated with the client's IP "
+"address and creating \n"
+" read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+" with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+" Note: You must stop/start the server after adding or changing "
+"clients."
+msgstr ""
+
#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
@@ -10117,45 +10273,6 @@ msgid ""
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ. "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'. 'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating separate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login privileges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients."
-msgstr ""
-
#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
@@ -10539,23 +10656,11 @@ msgstr "/dev/hda"
msgid "/dev/hdb"
msgstr "/dev/hdb"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
+"Application Name\n"
+"or Full Path:"
msgstr ""
#: ../../services.pm:1
@@ -10914,19 +11019,6 @@ msgstr "Пакетни (%s) ўрнатишда муаммолар пайдо б
msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-#: ../../standalone/drakbug:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add a scanner manually"
@@ -11031,7 +11123,7 @@ msgstr "Хавфсизлик бошқарувчиси:"
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy succeeded"
msgstr ""
@@ -11351,11 +11443,6 @@ msgstr ""
"Принтер \"%s\" аллақачон мавжуд.\n"
"Унинг мосламаларини алмаштиришни ростдан истайсизми?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No partition available"
-msgstr "Дискнинг қисми йўқ."
-
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
@@ -11366,6 +11453,11 @@ msgstr "Қуйидаги компютерлардаги сканнерларда
msgid "Unselected All"
msgstr "Ҳеч қайсини танламаш"
+#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "Дискнинг қисми йўқ."
+
#: ../../standalone/printerdrake:1
#, c-format
msgid "Printer Management \n"
@@ -11406,7 +11498,7 @@ msgstr ""
msgid "modem"
msgstr "модем"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "%s'га марҳамат"
@@ -11476,6 +11568,13 @@ msgstr ""
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Daemon, %s via:\n"
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid ""
@@ -11600,26 +11699,6 @@ msgstr ""
"\n"
"- Системанинг файллари:\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-" \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-" \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-" Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-" server on each client machine that has this feature enabled. Local "
-"configuration can be turned\n"
-" back off, retaining the configuration files, once the client machine "
-"is configured."
-msgstr ""
-
#: ../../standalone/drakbug:1
#, c-format
msgid "Standalone Tools"
@@ -12409,7 +12488,7 @@ msgstr "Linux'нинг келажагини яратинг!"
msgid "Local Printer"
msgstr "Локал принтер"
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "%s ускунани қаерга уламоқчисиз?"
@@ -12511,36 +12590,6 @@ msgstr "Сичқончанинг ускунаси: %s\n"
msgid "Reselect correct fonts"
msgstr "Тўғри шрифтларни бошқадан танлаш"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-"\t\t\t{\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs its images."
-msgstr ""
-
#: ../../help.pm:1
#, c-format
msgid ""
@@ -12799,6 +12848,11 @@ msgstr "Май"
msgid "Yaboot mode"
msgstr "Yaboot усули"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "3 тугмали андоза сичқонча"
+
#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
@@ -12814,11 +12868,6 @@ msgstr ""
"LiLo мавзусини ўрнатишни тугатиш учун консолда root сифатида \"lilo\" "
"буйруғини бажаринг."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "3 тугмали андоза сичқонча"
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
@@ -13145,23 +13194,6 @@ msgid ""
" --id <id_label> - load the html help page which refers to id_label\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-msgstr ""
-
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Select a scanner model"
@@ -13511,11 +13543,6 @@ msgstr ""
msgid "Sharing of local printers"
msgstr ""
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/92errata.php3"
-msgstr "http://www.mandrakelinux.com/en/92errata.php3"
-
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
@@ -13526,6 +13553,11 @@ msgstr ""
msgid "Available printers"
msgstr "Мавжуд бўлган принтерлар"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "NO"
+msgstr "МАЪЛУМОТ"
+
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
@@ -13559,21 +13591,6 @@ msgstr ""
"\n"
"Давом этиш учун \"%s\" тугмасини босинг."
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images. To create the file \n"
-" \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-" \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
@@ -14354,6 +14371,17 @@ msgstr ""
msgid "Refresh the list"
msgstr "Рўйхатни янгилаш"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Per client %s:\n"
+" \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+" \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+" \tdrakTermServ will help create these files."
+msgstr ""
+
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
@@ -14893,12 +14921,17 @@ msgstr "Андоза"
msgid "Cylinder %d to %d\n"
msgstr "Цилиндр %d дан %d гача\n"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "YOUR TEXT HERE"
+msgstr ""
+
#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "NONE"
msgstr ""
@@ -15454,6 +15487,11 @@ msgstr "Бошқа мултимедиа ускуналар"
msgid "burner"
msgstr ""
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Bug Description/System Information"
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid " (Default is all users)"
@@ -15587,6 +15625,26 @@ msgstr ""
msgid "If no port is given, 631 will be taken as default."
msgstr "Агар ҳеч қандай порт кўрсатилмаса, андоза сифатида 631 қабул қилинади."
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Per client system configuration files:\n"
+" \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+" \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+" \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+" \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+" Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+" server on each client machine that has this feature enabled. Local "
+"configuration can be\n"
+" turned back off, retaining the configuration files, once the client "
+"machine is configured."
+msgstr ""
+
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
@@ -15787,7 +15845,7 @@ msgstr ""
" (Параллел портлар: /dev/lp0, /dev/lp1, ..., LPT1:, LPT2:, ... га тенг, 1-чи "
"USB принтер: /dev/usb/lp0, 2-чи USB принтер: /dev/usb/lp1, ...)."
-#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Next"
msgstr "Кейингиси"
@@ -17012,7 +17070,7 @@ msgstr " adsl"
msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""
@@ -17577,6 +17635,11 @@ msgid ""
"Do you agree to lose all the partitions?\n"
msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Find Package"
+msgstr "%d пакет"
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
@@ -17693,6 +17756,24 @@ msgstr "Локал тармоқни мослаш"
msgid "hard disk model"
msgstr "қаттиқ дискнинг модели"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+" - Maintain /etc/exports:\n"
+" \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \tdiskless clients.\n"
+"\n"
+" \tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t/\t\t\t\t\t(ro,all_squash)\n"
+" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+" \tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
@@ -17867,16 +17948,16 @@ msgstr "Буюк Британия"
msgid "Unmount"
msgstr "Узиш"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Uninstall Fonts"
-msgstr "Шрифтларни ўчириш"
-
#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
+msgstr "Шрифтларни ўчириш"
+
#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
@@ -18248,17 +18329,6 @@ msgstr "\"%s\" ишга туширилмоқда..."
msgid "enable radio support"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-" \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-" \t\tdrakTermServ will help create these files."
-msgstr ""
-
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing to hosts: "