From 158b7107ff1a888bf91aff7e4f4b25cd395302cb Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Tue, 16 Sep 2003 17:08:46 +0000 Subject: updated pot files --- perl-install/share/po/uz@Cyrl.po | 586 ++++++++++++++++++++++----------------- 1 file changed, 328 insertions(+), 258 deletions(-) (limited to 'perl-install/share/po') diff --git a/perl-install/share/po/uz@Cyrl.po b/perl-install/share/po/uz@Cyrl.po index cb27faa68..4ff9c763d 100644 --- a/perl-install/share/po/uz@Cyrl.po +++ b/perl-install/share/po/uz@Cyrl.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX-uz@Cyrl\n" -"POT-Creation-Date: 2003-09-09 17:07+0200\n" +"POT-Creation-Date: 2003-09-16 13:45+0200\n" "PO-Revision-Date: 2003-09-10 23:11+0200\n" "Last-Translator: Mashrab Kuvatov \n" "Language-Team: Uzbek \n" @@ -187,7 +187,7 @@ msgstr "Ethernet карта" msgid "If set, send the mail report to this email address else send it to root" msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Параметерлар" @@ -491,6 +491,11 @@ msgstr "" msgid "Iraq" msgstr "Ироқ" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "connecting to %s ..." +msgstr "Bugzilla ёрдамчиси билан алоқа ўрнатилмоқда..." + #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" @@ -530,6 +535,16 @@ msgstr "Ўрнатилган шрифтларни қидириш" msgid "Default desktop" msgstr "Андоза иш столи" +#: ../../standalone/drakbug:1 +#, c-format +msgid "" +"To submit a bug report, click on the button report.\n" +"This will open a web browser window on %s\n" +" where you'll find a form to fill in. The information displayed above will " +"be \n" +"transferred to that server." +msgstr "" + #: ../../lang.pm:1 #, c-format msgid "Venezuela" @@ -1120,6 +1135,36 @@ msgid "" "No D-Channel (leased lines)" msgstr "" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - /etc/xinetd.d/tftp:\n" +" \tdrakTermServ will configure this file to work in conjunction with " +"the images created\n" +" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " +"the boot image to \n" +" \teach diskless client.\n" +"\n" +" \tA typical tftp configuration file looks like:\n" +" \t\t\n" +" \tservice tftp\n" +"\t\t\t{\n" +" disable = no\n" +" socket_type = dgram\n" +" protocol = udp\n" +" wait = yes\n" +" user = root\n" +" server = /usr/sbin/in.tftpd\n" +" server_args = -s /var/lib/tftpboot\n" +" \t}\n" +" \t\t\n" +" \tThe changes here from the default installation are changing the " +"disable flag to\n" +" \t'no' and changing the directory path to /var/lib/tftpboot, where " +"mkinitrd-net\n" +" \tputs its images." +msgstr "" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" @@ -1711,16 +1756,16 @@ msgstr "" msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Belgilash uchun %c va %c tugmalaridan foydalaning." -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to execute the file" -msgstr "" - #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "2 тугмали андоза сичқонча" +#: ../../standalone/drakperm:1 +#, c-format +msgid "Enable \"%s\" to execute the file" +msgstr "" + #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" @@ -2750,6 +2795,23 @@ msgstr "Дискнинг туб қисми Мб'да: " msgid "This is a mandatory package, it can't be unselected" msgstr "Бу ўрнатилиши шарт бўлган пакет, уни танлашни бекор қилиб бўлмайди." +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create etherboot floppies/CDs:\n" +" \tThe diskless client machines need either ROM images on the NIC, or " +"a boot floppy\n" +" \tor CD to initate the boot sequence. drakTermServ will help " +"generate these\n" +" \timages, based on the NIC in the client machine.\n" +" \t\t\n" +" \tA basic example of creating a boot floppy for a 3Com 3c509 " +"manually:\n" +" \t\t\n" +" \tcat /usr/lib/etherboot/boot1a.bin \\\n" +" \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" +msgstr "" + #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" @@ -3140,22 +3202,6 @@ msgstr "Файлларни яшириш" msgid "Auto-detect printers connected to this machine" msgstr "Бу компютерга уланган принтерларни автоматик равишда аниқлаш" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"XawTV isn't installed!\n" -"\n" -"\n" -"If you do have a TV card but DrakX has neither detected it (no bttv nor " -"saa7134\n" -"module in \"/etc/modules\") nor installed xawtv, please send the\n" -"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" -"with subject \"undetected TV card\".\n" -"\n" -"\n" -"You can install it by typing \"urpmi xawtv\" as root, in a console." -msgstr "" - #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" @@ -3674,6 +3720,15 @@ msgstr "" msgid "Restore From Tape" msgstr "Магнит тасмасидан тиклаш" +#: ../../standalone/drakbug:1 +#, c-format +msgid "" +"To submit a bug report, click the report button, which will open your " +"default browser\n" +"to Anthill where you will be able to upload the above information as a bug " +"report." +msgstr "" + #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" @@ -3807,7 +3862,7 @@ msgstr "" msgid "Need hostname, username and password!" msgstr "Компютернинг номи, фойдаланувчи ва махфий сўз керак!" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "Дискетни қўйинг" @@ -3947,11 +4002,6 @@ msgstr "Тармоқ интерфейси аллақачон мосланган" msgid "Couldn't access the floppy!" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "connecting to Bugzilla wizard ..." -msgstr "Bugzilla ёрдамчиси билан алоқа ўрнатилмоқда..." - #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" @@ -4130,6 +4180,11 @@ msgstr "Қабул қилиш" msgid "Description" msgstr "Таърифи" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Please enter summary text." +msgstr "" + #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" @@ -4969,7 +5024,7 @@ msgstr "" msgid "Right Control key" msgstr "Ўнг Ctrl тугмаси" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " @@ -5934,6 +5989,22 @@ msgstr "" msgid "busmouse" msgstr "" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create Etherboot Enabled Boot Images:\n" +" \tTo boot a kernel via etherboot, a special kernel/initrd image must " +"be created.\n" +" \tmkinitrd-net does much of this work and drakTermServ is just a " +"graphical \n" +" \tinterface to help manage/customize these images. To create the " +"file \n" +" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " +"include in \n" +" \tdhcpd.conf, you should create the etherboot images for at least " +"one full kernel." +msgstr "" + #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" @@ -6290,24 +6361,6 @@ msgstr "" msgid "Floppy" msgstr "Дискет" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/exports:\n" -" \t\tClusternfs allows export of the root filesystem to diskless " -"clients. drakTermServ\n" -" \t\tsets up the correct entry to allow anonymous access to the root " -"filesystem from\n" -" \t\tdiskless clients.\n" -"\n" -" \t\tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t\t/ (ro,all_squash)\n" -" \t\t/home SUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -"\t\t\tWith SUBNET/MASK being defined for your network." -msgstr "" - #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" @@ -6854,6 +6907,11 @@ msgstr "" msgid "Choose file" msgstr "Файлни танлаш" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Summary: " +msgstr "Ҳисобот" + #: ../../network/shorewall.pm:1 #, c-format msgid "" @@ -6926,6 +6984,17 @@ msgstr "Франциянинг Жанубий Ерлари" msgid "the vendor name of the processor" msgstr "Процессорни ишлаб чиқарган фирманинг номи" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain %s:\n" +" \tFor users to be able to log into the system from a diskless " +"client, their entry in\n" +" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" +" \thelps in this respect by adding or removing system users from this " +"file." +msgstr "" + #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" @@ -7219,6 +7288,11 @@ msgstr "Фойдаланувчиларни тиклаш" msgid "Encryption key for %s" msgstr "%s учун кодлаш калити" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Do you want to recover your system?" +msgstr "aboot дастуридан фойдаланишни истайсизми?" + #: ../../services.pm:1 #, c-format msgid "" @@ -7645,6 +7719,11 @@ msgstr "/CUPS'ни _мослаш" msgid ", " msgstr ", " +#: ../../standalone/drakbug:1 +#, c-format +msgid "Submit lspci" +msgstr "" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" @@ -7868,6 +7947,11 @@ msgstr "" "\n" "Мен шу адаптер билан локал тармоғингизни ўрнатаман." +#: ../../standalone/drakbug:1 +#, c-format +msgid "Submit cpuinfo" +msgstr "" + #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" @@ -7878,6 +7962,11 @@ msgstr "Минимал ўрнатиш" msgid "Ethiopia" msgstr "Эфиопия" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "YES" +msgstr "" + #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" @@ -8162,13 +8251,6 @@ msgstr "Ўрнатишнинг тури" msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "\"%s\" принтер \"%s\" SMB/Windows серверида" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Daemon (%s) include:\n" -msgstr "" - #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" @@ -8473,6 +8555,11 @@ msgstr "Мониторнинг HorizSync: %s\n" msgid "Path" msgstr "Йўл" +#: ../../standalone/drakbug:1 +#, c-format +msgid "NOT FOUND" +msgstr "" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "" @@ -9019,18 +9106,6 @@ msgstr "муҳим" msgid "Total Progress" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" -" \t\tFor users to be able to log into the system from a diskless " -"client, their entry in\n" -" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" -"\\$. drakTermServ helps\n" -" \t\tin this respect by adding or removing system users from this " -"file." -msgstr "" - #: ../../help.pm:1 #, c-format msgid "" @@ -9144,6 +9219,26 @@ msgstr "Мослаш бажарилди, мосламаларни қўллашн msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/dhcpd.conf:\n" +" \tTo net boot clients, each client needs a dhcpd.conf entry, " +"assigning an IP \n" +" \taddress and net boot images to the machine. drakTermServ helps " +"create/remove \n" +" \tthese entries.\n" +"\t\t\t\n" +" \t(PCI cards may omit the image - etherboot will request the correct " +"image. \n" +"\t\t\tYou should also consider that when etherboot looks for the images, it " +"expects \n" +"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" +"\t\t\t \n" +" \tA typical dhcpd.conf stanza to support a diskless client looks " +"like:" +msgstr "" + #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" @@ -9259,6 +9354,13 @@ msgstr "" "матн ойнасининг х координатаси\n" "белгилар сонида" +#: ../../fsedit.pm:1 +#, c-format +msgid "" +"You may not be able to install lilo (since lilo doesn't handle a LV on " +"multiple PVs)" +msgstr "" + #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" @@ -9522,6 +9624,16 @@ msgstr "Хостнинг ҳоми керак" msgid "Unselect fonts installed" msgstr "Ўрнатилган шрифтларни белгилашни бекор қилиш" +#: ../../mouse.pm:1 +#, c-format +msgid "Wheel" +msgstr "Ғилдиракли" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Submit kernel version" +msgstr "Интернет станция" + #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 @@ -9543,11 +9655,6 @@ msgstr "Бекор қилиш" msgid "Searching for configured scanners ..." msgstr "Мосланган сканнерлар қидирилмоқда..." -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" -msgstr "Ғилдиракли" - #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" @@ -9613,6 +9720,11 @@ msgstr "Андоза" msgid "Button 2 Emulation" msgstr "" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Please enter a package name." +msgstr "Илтимос фойдаланувчининг исмини киритинг" + #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" @@ -9696,6 +9808,11 @@ msgstr "" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" +#: ../../install_messages.pm:1 +#, c-format +msgid "http://www.mandrakelinux.com/en/92errata.php3" +msgstr "http://www.mandrakelinux.com/en/92errata.php3" + #: ../../lang.pm:1 #, c-format msgid "Honduras" @@ -9842,6 +9959,45 @@ msgstr "Файл системанинг кодлаш калити" msgid "Gujarati" msgstr "Гужарати" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" While you can use a pool of IP addresses, rather than setup a " +"specific entry for\n" +" a client machine, using a fixed address scheme facilitates using the " +"functionality\n" +" of client-specific configuration files that ClusterNFS provides.\n" +"\t\t\t\n" +" Note: The '#type' entry is only used by drakTermServ. Clients can " +"either be 'thin'\n" +" or 'fat'. Thin clients run most software on the server via xdmcp, " +"while fat clients run \n" +" most software on the client machine. A special inittab, %s is\n" +" written for thin clients. System config files xdm-config, kdmrc, and " +"gdm.conf are \n" +" modified if thin clients are used, to enable xdmcp. Since there are " +"security issues in \n" +" using xdmcp, hosts.deny and hosts.allow are modified to limit access " +"to the local\n" +" subnet.\n" +"\t\t\t\n" +" Note: The '#hdw_config' entry is also only used by drakTermServ. " +"Clients can either \n" +" be 'true' or 'false'. 'true' enables root login at the client " +"machine and allows local \n" +" hardware configuration of sound, mouse, and X, using the 'drak' " +"tools. This is enabled \n" +" by creating separate config files associated with the client's IP " +"address and creating \n" +" read/write mount points to allow the client to alter the file. Once " +"you are satisfied \n" +" with the configuration, you can remove root login privileges from " +"the client.\n" +"\t\t\t\n" +" Note: You must stop/start the server after adding or changing " +"clients." +msgstr "" + #: ../../interactive/stdio.pm:1 #, c-format msgid "" @@ -10117,45 +10273,6 @@ msgid "" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " -"entry for\n" -"\t\t\ta client machine, using a fixed address scheme facilitates using the " -"functionality\n" -"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " -"either be 'thin'\n" -"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " -"while fat clients run \n" -"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$" -"\\$IP=client_ip\\$\\$ is\n" -"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " -"gdm.conf are \n" -"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are " -"security issues in \n" -"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access " -"to the local\n" -"\t\t\tsubnet.\n" -"\t\t\t\n" -"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ. " -"Clients can either \n" -"\t\t\tbe 'true' or 'false'. 'true' enables root login at the client machine " -"and allows local \n" -"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. " -"This is enabled \n" -"\t\t\tby creating separate config files associated with the client's IP " -"address and creating \n" -"\t\t\tread/write mount points to allow the client to alter the file. Once " -"you are satisfied \n" -"\t\t\twith the configuration, you can remove root login privileges from the " -"client.\n" -"\t\t\t\n" -"\t\t\tNote: You must stop/start the server after adding or changing clients." -msgstr "" - #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." @@ -10539,23 +10656,11 @@ msgstr "/dev/hda" msgid "/dev/hdb" msgstr "/dev/hdb" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbug:1 #, c-format msgid "" -" - Maintain /etc/dhcpd.conf:\n" -" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " -"assigning an IP address\n" -" \t\tand net boot images to the machine. drakTermServ helps create/" -"remove these entries.\n" -"\t\t\t\n" -" \t\t(PCI cards may omit the image - etherboot will request the " -"correct image. You should\n" -" \t\talso consider that when etherboot looks for the images, it " -"expects names like\n" -" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \t\tA typical dhcpd.conf stanza to support a diskless client looks " -"like:" +"Application Name\n" +"or Full Path:" msgstr "" #: ../../services.pm:1 @@ -10914,19 +11019,6 @@ msgstr "Пакетни (%s) ўрнатишда муаммолар пайдо б msgid "You will receive an alert if the load is higher than this value" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"\n" -"\n" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on https://drakbug.mandrakesoft.com\n" -" where you'll find a form to fill in.The information displayed above will " -"be \n" -"transferred to that server\n" -"\n" -msgstr "" - #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" @@ -11031,7 +11123,7 @@ msgstr "Хавфсизлик бошқарувчиси:" msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" @@ -11351,11 +11443,6 @@ msgstr "" "Принтер \"%s\" аллақачон мавжуд.\n" "Унинг мосламаларини алмаштиришни ростдан истайсизми?" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No partition available" -msgstr "Дискнинг қисми йўқ." - #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " @@ -11366,6 +11453,11 @@ msgstr "Қуйидаги компютерлардаги сканнерларда msgid "Unselected All" msgstr "Ҳеч қайсини танламаш" +#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 +#, c-format +msgid "No partition available" +msgstr "Дискнинг қисми йўқ." + #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Management \n" @@ -11406,7 +11498,7 @@ msgstr "" msgid "modem" msgstr "модем" -#: ../../install_steps.pm:1 +#: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "%s'га марҳамат" @@ -11476,6 +11568,13 @@ msgstr "" msgid "Not the correct CD label. Disk is labelled %s." msgstr "" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"- Daemon, %s via:\n" +msgstr "" + #: ../../standalone/drakgw:1 #, c-format msgid "" @@ -11600,26 +11699,6 @@ msgstr "" "\n" "- Системанинг файллари:\n" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client system configuration files:\n" -" \t\tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \t\ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/" -"sysconfig/mouse, \n" -" \t\t/etc/sysconfig/keyboard on a per-client basis.\n" -"\n" -" Note: Enabling local client hardware configuration does enable root " -"login to the terminal \n" -" server on each client machine that has this feature enabled. Local " -"configuration can be turned\n" -" back off, retaining the configuration files, once the client machine " -"is configured." -msgstr "" - #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" @@ -12409,7 +12488,7 @@ msgstr "Linux'нинг келажагини яратинг!" msgid "Local Printer" msgstr "Локал принтер" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "%s ускунани қаерга уламоқчисиз?" @@ -12511,36 +12590,6 @@ msgstr "Сичқончанинг ускунаси: %s\n" msgid "Reselect correct fonts" msgstr "Тўғри шрифтларни бошқадан танлаш" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - /etc/xinetd.d/tftp:\n" -" \t\tdrakTermServ will configure this file to work in conjunction " -"with the images created by\n" -" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " -"the boot image to each\n" -" \t\tdiskless client.\n" -"\n" -" \t\tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \t\tservice tftp\n" -"\t\t\t{\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t\t}\n" -" \t\t\n" -" \t\tThe changes here from the default installation are changing the " -"disable flag to\n" -" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " -"mkinitrd-net\n" -" \t\tputs its images." -msgstr "" - #: ../../help.pm:1 #, c-format msgid "" @@ -12799,6 +12848,11 @@ msgstr "Май" msgid "Yaboot mode" msgstr "Yaboot усули" +#: ../../mouse.pm:1 +#, c-format +msgid "Generic 3 Button Mouse" +msgstr "3 тугмали андоза сичқонча" + #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" @@ -12814,11 +12868,6 @@ msgstr "" "LiLo мавзусини ўрнатишни тугатиш учун консолда root сифатида \"lilo\" " "буйруғини бажаринг." -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse" -msgstr "3 тугмали андоза сичқонча" - #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" @@ -13145,23 +13194,6 @@ msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create etherboot floppies/CDs:\n" -" \t\tThe diskless client machines need either ROM images on the NIC, " -"or a boot floppy\n" -" \t\tor CD to initate the boot sequence. drakTermServ will help " -"generate these images,\n" -" \t\tbased on the NIC in the client machine.\n" -" \t\t\n" -" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " -"manually:\n" -" \t\t\n" -" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" -" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" -msgstr "" - #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" @@ -13511,11 +13543,6 @@ msgstr "" msgid "Sharing of local printers" msgstr "" -#: ../../install_messages.pm:1 -#, c-format -msgid "http://www.mandrakelinux.com/en/92errata.php3" -msgstr "http://www.mandrakelinux.com/en/92errata.php3" - #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." @@ -13526,6 +13553,11 @@ msgstr "" msgid "Available printers" msgstr "Мавжуд бўлган принтерлар" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "NO" +msgstr "МАЪЛУМОТ" + #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" @@ -13559,21 +13591,6 @@ msgstr "" "\n" "Давом этиш учун \"%s\" тугмасини босинг." -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create Etherboot Enabled Boot Images:\n" -" \t\tTo boot a kernel via etherboot, a special kernel/initrd image " -"must be created.\n" -" \t\tmkinitrd-net does much of this work and drakTermServ is just a " -"graphical interface\n" -" \t\tto help manage/customize these images. To create the file \n" -" \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " -"include in \n" -" \t\tdhcpd.conf, you should create the etherboot images for at least " -"one full kernel." -msgstr "" - #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" @@ -14354,6 +14371,17 @@ msgstr "" msgid "Refresh the list" msgstr "Рўйхатни янгилаш" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client %s:\n" +" \tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +" \tdrakTermServ will help create these files." +msgstr "" + #: ../../standalone/drakpxe:1 #, c-format msgid "" @@ -14893,12 +14921,17 @@ msgstr "Андоза" msgid "Cylinder %d to %d\n" msgstr "Цилиндр %d дан %d гача\n" +#: ../../standalone/drakbug:1 +#, c-format +msgid "YOUR TEXT HERE" +msgstr "" + #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" -#: ../../standalone/draksec:1 +#: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" @@ -15454,6 +15487,11 @@ msgstr "Бошқа мултимедиа ускуналар" msgid "burner" msgstr "" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Bug Description/System Information" +msgstr "" + #: ../../standalone/drakbackup:1 #, c-format msgid " (Default is all users)" @@ -15587,6 +15625,26 @@ msgstr "" msgid "If no port is given, 631 will be taken as default." msgstr "Агар ҳеч қандай порт кўрсатилмаса, андоза сифатида 631 қабул қилинади." +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client system configuration files:\n" +" \tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +" \tclients can customize files such as /etc/modules.conf, /etc/" +"sysconfig/mouse, \n" +" \t/etc/sysconfig/keyboard on a per-client basis.\n" +"\n" +" Note: Enabling local client hardware configuration does enable root " +"login to the terminal \n" +" server on each client machine that has this feature enabled. Local " +"configuration can be\n" +" turned back off, retaining the configuration files, once the client " +"machine is configured." +msgstr "" + #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" @@ -15787,7 +15845,7 @@ msgstr "" " (Параллел портлар: /dev/lp0, /dev/lp1, ..., LPT1:, LPT2:, ... га тенг, 1-чи " "USB принтер: /dev/usb/lp0, 2-чи USB принтер: /dev/usb/lp1, ...)." -#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1 +#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "Кейингиси" @@ -17012,7 +17070,7 @@ msgstr " adsl" msgid "format of floppies supported by the drive" msgstr "" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" @@ -17577,6 +17635,11 @@ msgid "" "Do you agree to lose all the partitions?\n" msgstr "" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Find Package" +msgstr "%d пакет" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" @@ -17693,6 +17756,24 @@ msgstr "Локал тармоқни мослаш" msgid "hard disk model" msgstr "қаттиқ дискнинг модели" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/exports:\n" +" \tClusternfs allows export of the root filesystem to diskless " +"clients. drakTermServ\n" +" \tsets up the correct entry to allow anonymous access to the root " +"filesystem from\n" +" \tdiskless clients.\n" +"\n" +" \tA typical exports entry for clusternfs is:\n" +" \t\t\n" +" \t/\t\t\t\t\t(ro,all_squash)\n" +" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" +"\t\t\t\n" +" \tWith SUBNET/MASK being defined for your network." +msgstr "" + #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" @@ -17867,16 +17948,16 @@ msgstr "Буюк Британия" msgid "Unmount" msgstr "Узиш" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Uninstall Fonts" -msgstr "Шрифтларни ўчириш" - #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" +#: ../../standalone/drakfont:1 +#, c-format +msgid "Uninstall Fonts" +msgstr "Шрифтларни ўчириш" + #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" @@ -18248,17 +18329,6 @@ msgstr "\"%s\" ишга туширилмоқда..." msgid "enable radio support" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" -" \t\tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \t\ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \t\tdrakTermServ will help create these files." -msgstr "" - #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " -- cgit v1.2.1