Make threshold to be 0% to avoid broken docs.

15 files changed, 884 insertions, 2 deletions

diff --git a/docs/installer/makedoc.sh b/docs/installer/makedoc.sh
index a3802cb6..1d9465b8 100755
--- a/docs/installer/makedoc.sh
+++ b/docs/installer/makedoc.sh
@@ -9,7 +9,7 @@ for doc in acceptLicense addUser ask_mntpoint_s installer selectInstallClass \
   configureX_card_list configureX_monitor configureX_chooser \
   setupBootloaderAddEntry minimal-install securityLevel selectCountry media_selection add_supplemental_media; do
 
-  po4a-translate -k 1 --format docbook --master-charset utf-8 --localized-charset utf-8 \
+  po4a-translate -k 0 --format docbook --master-charset utf-8 --localized-charset utf-8 \
     --master en/${doc}.xml \
     --po $LANG.po --localized $LANG/${doc}.xml
   perl -i -p -e "s/version=\"5\.0\"/version=\"5\.0\" xml:lang=\"$LANG\"/;" $LANG/${doc}.xml
diff --git a/docs/installer/sv.po b/docs/installer/sv.po
index faa52606..ec6a6094 100644
--- a/docs/installer/sv.po
+++ b/docs/installer/sv.po
@@ -2015,7 +2015,7 @@ msgstr ""
 #. type: Attribute 'xml:lang' of: <section>
 #: en/DrakX.xml:1 en/media_selection.xml:1 en/add_supplemental_media.xml:2
 msgid "en"
-msgstr "en"
+msgstr "sv"
 
 #. type: Content of: <article><info><title>
 #: en/DrakX.xml:3
diff --git a/docs/installer/sv/addUser.xml b/docs/installer/sv/addUser.xml
new file mode 100644
index 00000000..b0bdb385
--- /dev/null
+++ b/docs/installer/sv/addUser.xml
@@ -0,0 +1,153 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="addUser" version="5.0" xml:lang="sv">
+
+  <info>
+    <title xml:id="addUser-ti1">Hantering av användare och administratör</title>
+  </info>
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+  
+  
+  
+   <mediaobject>
+<!-- Started by marja,using Led43's text, on 2012 03 27 -->
+<!-- NEEDS TO BE REVIEWED! -->
+<!-- SimonNZG 2012-04-03 has taken a look but needs to come back -->
+<!-- removed para xml:id's, finished the page using Led43's text in the wiki, but
+       changed his text about the Advanced User Managment screen (the only thing 
+       about guest account there, is the box you can tick or untick to enable or 
+       disable it, the rest is about the normal user you're adding in the previous
+       screen), marja, 20120409-->
+<!-- barjac 2012-04-13 moved explanation of xguest lower down. I don't understand
+       "rbash" in the xguest warning - is that correct? -->
+<!-- JohnR 2012-04-19 Language proofreading  -->
+<!-- marja 2012-04-24 Added screenshot -->
+<!-- marja 2013-04-26 added new note -->
+<imageobject> <imagedata revision="1" fileref="dx2-setRootPassword.png"
+format="PNG" align="center" xml:id="setRootPassword-im1"></imagedata>
+</imageobject></mediaobject>
+
+  <section xml:id="root-password">
+    <info>
+      <title xml:id="root-password-ti2">Ställ in ett administratörs  (root) -lösenord:</title>
+    </info>
+
+    <para>Det är </para>
+
+    <note xml:id="givePassword">
+      <para>Alla lösenord är skifteslägeskänsliga, det bästa är att använda en blandning
+av bokstäver (stora och små), nummer och andra karaktärer i ett lösenord.</para>
+    </note>
+  </section>
+
+  <section xml:id="enterUser">
+    <info>
+      <title xml:id="enterUser-ti3">Ange en användare</title>
+    </info>
+
+    <para>Lägg till en användare här. En användare har färre rättigheter än en
+administratör (root), men tillräckligt för att surfa på nätet, använda
+kontorsapplikationer eller spela spel och allting annat som den generella
+användaren gör med sin dator</para>
+
+    <itemizedlist>
+      <listitem>
+        <para><guibutton>Ikon</guibutton>: om du klickar på den här knappen så kommer det
+att ändra användarens ikon.</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Riktigt namn</guilabel>: Skriv in användarens riktiga namn i detta
+fält.</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Inloggningsnamn</guilabel>: Här kan du skriva in användarens
+inloggningsnamn eller låta drakx använda en version av användarens riktiga
+namn. <emphasis>Inloggningsnamnet är skifteslägeskänsligt</emphasis></para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Password</guilabel>: In this text box you should type in the user
+password. There is a shield at the end of the text box that indicates the
+strength of the password. (See also <xref linkend="givePassword"></xref>)</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Password (again)</guilabel>: Retype the user password into this
+text box and drakx will check you have the same password in each of the user
+password text boxes.</para>
+      </listitem>
+    </itemizedlist>
+
+   <note>
+      <para>Alla användare som du lägger till under installationen av Mageia kommer att
+ha en värdsligt läsbar (men skrivskyddad) hem-mapp.</para>
+
+      <para>Hur som helst, när du använder din nya installation så kommer alla användare
+som du lägger till i <emphasis>MCC - System - Hantera användare i
+systemet</emphasis> att ha en Hem-mapp som är både läs och skrivskyddad.</para>
+
+      <para>If you don't want a world readable home directory for anyone, it is advised
+to only add a temporary user now and to add the real one(s) after reboot.</para>
+
+      <para>If you prefer world readable home directories, you might want to add all
+extra needed users in the <emphasis>Configuration - Summary</emphasis> step
+during the install. Choose <emphasis>User management</emphasis>.</para>
+
+      <para>The access permissions can also be changed after the install.</para>
+   </note>
+
+  </section>
+
+  <section xml:id="addUserAdvanced">
+    <info>
+      <title xml:id="addUserAdvanced-ti3">Avancerad hantering av användare</title>
+    </info>
+
+    <para>If the <guibutton>advanced</guibutton> button is clicked you are offered a
+screen that allows you to edit the settings for the user you are
+adding. Additionally, you can disable or enable a guest account.</para>
+
+    <warning>
+      <para>Anything a guest with a default <emphasis>rbash</emphasis> guest account
+saves to his /home directory will be erased when he logs out.  The guest
+should save his important files to a USB key.</para>
+    </warning>
+
+    <itemizedlist>
+      <listitem>
+        <para><guilabel>Enable guest account</guilabel>: Here you can enable or disable a
+guest account. The guest account allows a guest to log into and use the PC,
+but he has more restricted access than normal users.</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Shell</guilabel>: This drop down list allows you to change the
+shell used by the user you are adding in the previous screen, options are
+Bash, Dash and Sh</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>User ID</guilabel>: Here you can set the user ID for the user you
+are adding in the previous screen. This is a number.  Leave it blank unless
+you know what you are doing.</para>
+      </listitem>
+
+      <listitem>
+        <para><guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a
+number, usually the same one as for the user. Leave it blank unless you know
+what you are doing.</para>
+      </listitem>
+    </itemizedlist>
+  </section>
+</section>
\ No newline at end of file
diff --git a/docs/installer/sv/add_supplemental_media.xml b/docs/installer/sv/add_supplemental_media.xml
new file mode 100644
index 00000000..e2d95978
--- /dev/null
+++ b/docs/installer/sv/add_supplemental_media.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<section version="5.0" xml:lang="sv" xml:id="add_supplemental_media"
+         xmlns="http://docbook.org/ns/docbook"
+         xmlns:ns5="http://www.w3.org/1999/xhtml"
+         xmlns:ns42="http://www.w3.org/1998/Math/MathML"
+         xmlns:ns4="http://www.w3.org/1999/xlink"
+         xmlns:ns3="http://www.w3.org/2000/svg"
+         xmlns:ns="http://docbook.org/ns/docbook">
+  <info>
+    <title xml:id="add_supplemental_media-ti1">Val av medier (Konfigurera kompletterande installationsmedier)</title>
+    </info>
+
+  
+  
+  
+
+<mediaobject>
+<!-- papoteur 2013-04-13  - created -->
+<!-- marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection -->
+<!-- marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell -->
+<imageobject> <imagedata align="center"
+fileref="dx2-add_supplemental_media.png" format="PNG" revision="1"
+xml:id="dx2-add_supplemental_media-im1"/> </imageobject></mediaobject>
+
+  <para>Denna ruta ger dig en lista över redan upptäckta förvaringsplatser. Du kan
+lägga till andra källor för paket, till exempel en optisk skiva eller en
+fjärrstyrd källa. Valet av källa avgör vilka paket som kommer att göras
+tillgängliga för val under nästa steg.</para>
+
+  <para>För en nätverkskälla så finns det två steg att följa:</para>
+
+  <orderedlist>
+    <listitem>
+      <para>Val och aktivering av nätverket om det inte redan är uppe. </para>
+    </listitem>
+
+    <listitem>
+      <para>Väljer en spegel eller specificera en URL (allra första posten). Genom att
+välja en spegel så har du tillgång till urvalet av alla förvaringsplatser
+som hanteras av Mageia, till exempel non-free, tainted och uppdateringarna
+som de ger. Med denna URL så kan du utse en specifik förvaringsplats eller
+din egen NFS-installation.</para>
+    </listitem>
+  </orderedlist>
+</section>
diff --git a/docs/installer/sv/choosePackageGroups.xml b/docs/installer/sv/choosePackageGroups.xml
new file mode 100644
index 00000000..77a53fac
--- /dev/null
+++ b/docs/installer/sv/choosePackageGroups.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="choosePackageGroups">
+
+    <info>
+      <title xml:id="choosePackageGroups-ti1">Val av paketgrupp</title>
+    </info>
+
+    
+
+<mediaobject>
+<!--2012-12-26 marja - exported this section from choosePackages.xml to start a new page-->
+<imageobject> <imagedata fileref="dx2-choosePackageGroups.png"
+align="center" format="PNG" ></imagedata> </imageobject></mediaobject>
+
+    <para>Packages have been sorted into groups, to make choosing what you need on
+your system a lot easier. The groups are fairly self explanatory, however
+more information about the content of each is available in tool-tips which
+become visible as the mouse is hovered over them.</para>
+
+    <itemizedlist>
+      <listitem>
+        <para>Workstation.</para>
+      </listitem>
+
+      <listitem>
+        <para>Server.</para>
+      </listitem>
+
+      <listitem>
+        <para>Graphical Environment.</para>
+      </listitem>
+
+      <listitem>
+        <para>Individual Package Selection: You can use this option to manually add or
+remove packages.</para>
+      </listitem>
+    </itemizedlist>
+    <para>Read <xref linkend="minimal-install"></xref> for instructions on how to do a
+minimal install.</para> 
+  </section>
+
diff --git a/docs/installer/sv/choosePackagesTree.xml b/docs/installer/sv/choosePackagesTree.xml
new file mode 100644
index 00000000..7c818807
--- /dev/null
+++ b/docs/installer/sv/choosePackagesTree.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="choosePackagesTree">
+
+    <info>
+      <title xml:id="choosePackagesTree-ti1">Choose Individual Packages</title>
+    </info>
+
+    
+
+<mediaobject>
+<!--2012-12-26 marja - exported this section from choosePackages.xml to start a new page-->
+<imageobject> <imagedata fileref="dx2-choosePackagesTree.png" align="center"
+format="PNG" ></imagedata> </imageobject></mediaobject>
+
+    <para>Here you can add or remove any extra packages to customise your
+installation.</para>
+
+    <para>After having made your choice, you can click on the <guibutton>floppy
+icon</guibutton> at the bottom of the page to save your choice of packages
+(saving to a USB key works, too). You can then use this file to install the
+same packages on another system, by pressing the same button during install
+and choosing to load it.</para>
+  </section>
+
diff --git a/docs/installer/sv/configureX_monitor.xml b/docs/installer/sv/configureX_monitor.xml
new file mode 100644
index 00000000..667e4ebe
--- /dev/null
+++ b/docs/installer/sv/configureX_monitor.xml
@@ -0,0 +1,83 @@
+<?xml version="1.0" encoding="utf-8"?>
+<section version="5.0" xml:lang="sv" xml:id="configureX_monitor"
+         xmlns="http://docbook.org/ns/docbook"
+         xmlns:ns5="http://www.w3.org/1999/xhtml"
+         xmlns:ns4="http://www.w3.org/1998/Math/MathML"
+         xmlns:ns3="http://www.w3.org/2000/svg"
+         xmlns:ns2="http://www.w3.org/1999/xlink"
+         xmlns:ns="http://docbook.org/ns/docbook">
+  
+
+  
+
+  
+
+  
+
+  <info>
+    <!-- Initiated by Marga 2012-8-09 -->
+<!-- Further text JohnR  2012-08-30 -->
+<!-- tproof -->
+<!-- lproof -->
+<title xml:id="configureX_monitor-ti1">Att välja din skärm</title>
+  </info>
+
+  <para revision="1" xml:id="configureX_monitor-pa1">DrakX has a very comprehensive database of monitors and will usually
+correctly identify yours.</para>
+
+  <warning>
+    <para revision="1" xml:id="configureX_monitor-pa1w"><emphasis>Selecting a monitor with different characteristics could damage
+your monitor or video hardware. Please don't try something without knowing
+what you are doing.</emphasis> If in doubt you should consult your monitor
+documentation</para>
+  </warning>
+
+  <mediaobject>
+<imageobject> <imagedata align="center" fileref="dx2-configureX_monitor.png"
+format="PNG" revision="1" xml:id="configureX_monitor-im1"/> </imageobject></mediaobject>
+
+  <para revision="1"
+  xml:id="configureX_monitor-pa2"><emphasis>Anpassad</emphasis></para>
+
+  <para revision="1" xml:id="configureX_monitor-pa3">This option allows you to set two critical parameters, the vertical refresh
+rate and the horizontal sync rate. Vertical refresh determines how often the
+screen is refreshed and horizontal sync is the rate at which scan lines are
+displayed.</para>
+
+  <para revision="1" xml:id="configureX_monitor-pa4">It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor
+type with a sync range that is beyond the capabilities of your monitor: you
+may damage your monitor. If in doubt, choose a conservative setting and
+consult your monitor documentation.</para>
+
+  <para revision="1" xml:id="configureX_monitor-pa5"><emphasis>Plug 'n Play</emphasis></para>
+
+  <para revision="1" xml:id="configureX_monitor-pa6">This is the default option and tries to determine the monitor type from the
+monitor database.</para>
+
+  <para revision="1"
+  xml:id="configureX_monitor-pa7"><emphasis>Tillverkare</emphasis></para>
+
+  <para revision="1" xml:id="configureX_monitor-pa8">Om installationen inte har upptäckt ditt rätta grafikkort och du vet vilket
+du har så kan du välja det från trädet genom att välja: <itemizedlist>
+      <listitem>
+        <para>tillverkare</para>
+      </listitem>
+
+      <listitem>
+        <para>the monitor manufacturers name</para>
+      </listitem>
+
+      <listitem>
+        <para>beskrivning av skärmen</para>
+      </listitem>
+    </itemizedlist></para>
+
+  <para revision="1"
+  xml:id="configureX_monitor-pa9"><emphasis>Standard</emphasis></para>
+
+  <para revision="1" xml:id="configureX_monitor-pa10">selecting this group displays nearly 30 display configurations such as
+1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is
+often a good monitor selection group if you need to use the Vesa card driver
+when your video hardware cannot be determined automatically. Once again it
+may be wise to be conservative in your selections.</para>
+</section>
diff --git a/docs/installer/sv/doPartitionDisks.xml b/docs/installer/sv/doPartitionDisks.xml
new file mode 100644
index 00000000..47cf05fa
--- /dev/null
+++ b/docs/installer/sv/doPartitionDisks.xml
@@ -0,0 +1,117 @@
+<?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns6="http://www.w3.org/1999/xlink" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="doPartitionDisks">
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+  
+  
+
+  <info>
+    <!-- Started by marja on 2012 03 29 -->
+<!-- NEEDS TO BE WRITTEN AND THEN REVIEWED! -->
+<!-- JohnR 2012-04-10 - tidy up module formatting -->
+<!-- barjac 2012-04-20 Yes I agree with Lebarhon - reference to home partition removed -->
+<!-- Simonnzg - doing anything to a Windows partition is DANGEROUS. I would prefer 
+       if this was not an option, but... -->
+<!-- marja 2012-04-24 put the para xml id's back.  -->
+<!-- marja 2012-04-29 changed text as discussed on the ml and with papoteur's approval
+ lebarhon: 2012-08-18 warning added-->
+<!-- marja 2013-04-05 changed warning to text suggested by Dave Hodgings in bug 9594 -->
+<!-- marja 2013-04-05 adjusted last line of warning as suggested by obgr_seneca -->
+<!-- lebarhon 2013-04-11 adjusted last line of warning as suggested by Dave Hodgins/Marja-->
+<title xml:id="doPartitionDisks-ti1">Partitioning</title>
+  </info>
+
+  <para revision="1" xml:id="doPartitionDisks-pa1">In this screen you can see the content of your hard drive(s) and see the
+solutions the DrakX partitioning wizard found for where to install
+<application>Mageia</application>.</para>
+
+  <para revision="1" xml:id="doPartitionDisks-pa2">The options available from the list below will vary depending on your
+particular hard drive(s) layout and content.</para>
+
+  <mediaobject>
+<imageobject> <imagedata align="center" fileref="dx2-doPartitionDisks.png"
+/> </imageobject></mediaobject>
+
+  <para revision="1" xml:id="doPartitionDisks-pa3"><itemizedlist>
+      <listitem>
+        <para revision="1" xml:id="doPartitionDisks-pa4">Use Existing Partitions</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa5">If this option is available, then existing Linux compatible partitions have
+been found and may be used for the installation.</para>
+      </listitem>
+
+      <listitem>
+        <para revision="1" xml:id="doPartitionDisks-pa6">Use Free Space</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa7">If you have unused space on your hard drive then this option will use it for
+your new Mageia installation.</para>
+      </listitem>
+
+      <listitem>
+        <para revision="1" xml:id="doPartitionDisks-pa8">Use Free Space on a Windows Partition</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa9">If you have unused space on an existing Windows partition, the installer may
+offer to use it.</para>
+
+        <para xml:id="doPartitionDisks-pa10" revision="2">This can be a useful way of making room for your new Mageia installation,
+but is a risky operation so you should make sure you have backed up all
+important files!</para>
+
+        <para xml:id="doPartitionDisks-pa11" revision="3">Note that this involves shrinking the size of the Windows partition. The
+partition must be "clean", meaning that Windows must have closed down
+correctly the last time it was used. It must also have been defragmented,
+although this is not a guarantee that all files in the partition have been
+moved out of the area that is about to be used. It is highly recommended to
+back up your personal files.</para>
+      </listitem>
+    </itemizedlist> <itemizedlist>
+      <listitem>
+        <para revision="1" xml:id="doPartitionDisks-pa12">Erase and use Entire Disk.</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa13">This option will use the complete drive for Mageia.</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa14">Note! This will erase ALL data on the selected hard drive. Take care!</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa15">If you intend to use part of the disk for something else, or you already
+have data on the drive that you are not prepared to lose, then do not use
+this option.</para>
+      </listitem>
+    </itemizedlist> <itemizedlist>
+      <listitem>
+        <para revision="1" xml:id="doPartitionDisks-pa16">Custom</para>
+
+        <para revision="1" xml:id="doPartitionDisks-pa17">This gives you complete control over the placing of the installation on your
+hard drive(s).</para>
+      </listitem>
+    </itemizedlist></para>
+
+  <warning>
+    <para>Some newer drives are now using 4096 byte logical sectors, instead of the
+previous standard of 512 byte logical sectors. Due to lack of available
+hardware, the partitioning tool used in the installer has not been tested
+with such a drive. Also some ssd drives now use an erase block size over 1
+MB. We suggest to pre-partition the drive, using an alternative partitioning
+tool like gparted, if you own such a device, and to use the following
+settings: </para>
+
+    <para>"Align to" "MiB" </para>
+
+    <para>"Free space preceding (MiB)" "2" </para>
+
+    <para>Also make sure all partitions are created with an even number of megabytes.</para>
+  </warning>
+</section>
\ No newline at end of file
diff --git a/docs/installer/sv/formatPartitions.xml b/docs/installer/sv/formatPartitions.xml
new file mode 100644
index 00000000..d401779a
--- /dev/null
+++ b/docs/installer/sv/formatPartitions.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="formatPartitions">
+
+  <info>
+    <title xml:id="formatPartitions-ti1">Formatting</title>
+  </info>
+
+  
+
+  
+  
+  
+  
+  
+  
+  
+  
+   <mediaobject>
+<!-- Made by marja on 2012 03 29 -->
+<!-- NEEDS TO BE REVIEWED! -->
+<!-- marja 2012-04-24 added screenshot -->
+<!-- marja 2012-04-24 added emphasis tags in formatPartitions-pa1 -->
+<imageobject> <imagedata revision="1" fileref="dx2-formatPartitions.png"
+format="PNG" align="center" xml:id="formatPartitions-im1"> </imagedata>
+</imageobject></mediaobject>
+
+  <para revision="2" xml:id="formatPartitions-pa1">Here you can choose which partition(s) you wish to format. Any data on
+partitions <emphasis>not</emphasis> marked for formatting will be saved.</para>
+
+  <para revision="1" xml:id="formatPartitions-pa2">Usually at least the partitions DrakX selected, need to be formatted</para>
+
+  <para revision="1" xml:id="formatPartitions-pa3">Click on <guibutton>Advanced</guibutton> to choose partitions you want to
+check for so called <emphasis>bad blocks</emphasis></para>
+
+  <tip>
+    <para revision="1" xml:id="formatPartitions-pa4">If you're not sure you have made the right choice, you can click on
+<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton>
+and then on <guibutton>Custom</guibutton> to get back to the main screen.
+In that screen you can choose to view what is in your partitions.</para>
+  </tip>
+
+  <para revision="1" xml:id="formatPartitions-pa5">När du är säker på ditt val, klicka på <guibutton>Nästa</guibutton> för att
+fortsätta.</para>
+</section>
diff --git a/docs/installer/sv/installer.xml b/docs/installer/sv/installer.xml
new file mode 100644
index 00000000..a315b2f3
--- /dev/null
+++ b/docs/installer/sv/installer.xml
@@ -0,0 +1,149 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="installer">
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  
+
+  <info>
+    <!-- Made by marja on 2012 03 30, using barjac's text -->
+<!-- NEEDS TO BE REVIEWED! -->
+<!--removed para id's, corrected duplicate id's for segments, marja, 20120409 -->
+<!--barjac 2012-04-11 - corrected link to Welcome screen and unmangled header - 
+      seems to be corrupted by xxe addon when saving -->
+<!-- JohnR - apparent corruption is caused by the positioning of this comment block 
+       - corrected Lebarhon : I put [] where it seems having mistakes  -->
+<!-- barjac 18/04/2012 Commented out para relating to peripherals, as it's apparently wrong -->
+<title xml:id="installer-ti1">Mageia-installeraren DrakX</title>
+  </info>
+
+  <para>Whether you are new to GNU-Linux or an experienced user, the Mageia
+Installer is designed to help make your installation or upgrade as easy as
+possible.</para>
+
+  
+
+  <!-- <para>
+If you have peripherals like printers or scanners, it is [best] to
+  connect them and make sure they are powered up during installation. These
+  will be automatically detected and configured.</para> -->
+<para>The initial menu screen has various options, however the default one will
+start the installer, which will normally be all that you will need.</para>
+
+  <figure xml:id="dx-welcome">
+<info>
+      <title xml:id="installer-ti2">Välkomstskärm till installationen</title>
+    </info> <mediaobject>
+<imageobject> <imagedata revision="1" fileref="../dx-welcome.png"
+align="center" format="PNG" xml:id="BId-drakx-intro-im1"> </imagedata>
+</imageobject></mediaobject></figure>
+
+  <para>If there are problems during install, then it may be necessary to use
+special installation options, see <xref
+linkend="installationOptions"></xref>.</para>
+
+  <section xml:id="installationSteps">
+    <info>
+      <title xml:id="installationSteps-ti1">The installation steps</title>
+    </info>
+
+    <para>The install process is divided into a number of steps, which can be followed
+on the side panel of the screen.</para>
+
+    <para>Each step has one or more screens which may also have
+<guibutton>Advanced</guibutton> buttons with extra, less commonly required,
+options.</para>
+
+    <para>Most screens have <guibutton>Help</guibutton> buttons which give further
+explanations about the current step.</para>
+
+    <note>
+      <para>If somewhere during install you decide to stop the installation, it is
+possible to reboot, but please think twice before you do this.  Once a
+partition has been formatted or updates have started to be installed, your
+computer is no longer in the same state and rebooting it could very well
+leave you with an unusable system. If in spite of this you are very sure
+rebooting is what you want, go to a text terminal by pressing the three keys
+<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press
+<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot.</para>
+    </note>
+  </section>
+
+  <section xml:id="installationOptions">
+    <info>
+      <title xml:id="installationOptions-ti1">Installationsalternativ</title>
+    </info>
+
+    <para>If the installation fails then it may be necessary to try again by using one
+of the extra options available by hitting the <guibutton>F1
+(Help)</guibutton> key see <xref linkend="dx-welcome"></xref></para>
+
+    <para>This will open the following text based help.</para>
+
+    <figure xml:id="dx-help">
+<info>
+        <title xml:id="installationOptions-ti2">Hjälpskärm för installation</title>
+      </info> <mediaobject>
+<imageobject> <imagedata revision="1" fileref="../dx-help.png"
+align="center" format="PNG" xml:id="installer-im2"></imagedata>
+</imageobject></mediaobject></figure>
+
+    <section xml:id="installationProblems">
+      <info>
+        <title xml:id="installationProblems-ti1">Installation Problems and Possible Solutions</title>
+      </info>
+
+      <section xml:id="noX">
+        <info>
+          <title xml:id="noX-ti2">No Graphical Interface</title>
+        </info>
+
+        <itemizedlist>
+          <listitem>
+            <para>After the initial screen you did not reach the language selection
+screen. This can happen with some graphic cards and older systems. Try using
+low resolution by typing <code>vgalo</code> at the prompt.</para>
+          </listitem>
+
+          <listitem>
+            <para revision="2">If the hardware is very old, a graphical installation may not be
+possible. In this case it is worth trying a text mode installation. To use
+this hit ESC at the first welcome screen and confirm with ENTER. You will be
+presented with a black screen with the word "boot:". Type "text" and hit
+ENTER. Now continue with the installation in text mode.<emphasis></emphasis></para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section xml:id="installFreezes">
+        <info>
+          <title xml:id="installFreezes-ti1">The Install Freezes</title>
+        </info>
+
+        <para>If the system appeared to freeze during the installation, this may be a
+problem with hardware detection. In this case the automatic detection of
+hardware may be bypassed and dealt with later. To try this, type
+<code>noauto</code> at the prompt. This option may also be combined with
+other options as necessary.</para>
+      </section>
+
+      <section xml:id="kernelOptions">
+        <info>
+          <title xml:id="kernelOptions-ti1">Kernel Options</title>
+        </info>
+
+        <para>These will rarely be needed, but in some cases the hardware may report the
+available RAM incorrectly. To specify this manually, you can use the
+<code>mem=xxxM</code> parameter, where xxx is the correct amount of
+RAM. e.g. <code>mem=256M</code> would specify 256MB of RAM.</para>
+      </section>
+    </section>
+  </section>
+</section>
\ No newline at end of file
diff --git a/docs/installer/sv/media_selection.xml b/docs/installer/sv/media_selection.xml
new file mode 100644
index 00000000..4c306a31
--- /dev/null
+++ b/docs/installer/sv/media_selection.xml
@@ -0,0 +1,45 @@
+<?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="media_selection" version="5.0" xml:lang="sv">
+  <info>
+    <title xml:id="media_selection-ti1">Val av media (Nonfree)</title>
+  </info>
+
+  
+  
+  
+  
+
+<mediaobject>
+<!-- papoteur 2013-04-11  - created -->
+<!-- marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)-->
+<!-- marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell -->
+<!--marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)-->
+<imageobject> <imagedata align="center" fileref="dx2-media_selection.png"
+format="PNG" revision="1" xml:id="media_selection-im1"/> </imageobject></mediaobject>
+
+  <para>Here you have the list of available repositories. Not all repositories are
+available, according to which media you use for installing. The repositories
+selection determines which packages will be available for selection during
+the next steps.</para>
+
+  <itemizedlist>
+    <listitem>
+      <para>The <emphasis>Core</emphasis> repository cannot be disabled as it contains
+the base of the distribution.</para>
+    </listitem>
+
+    <listitem>
+      <para>The <emphasis>Non-free</emphasis> repository includes packages that are
+free-of-charge, i.e. Mageia may redistribute them, but they contain
+closed-source software (hence the name - Nonfree). For example this
+repository includes nVidia and ATI graphics card proprietary drivers,
+firmware for various WiFi cards, etc.</para>
+    </listitem>
+
+    <listitem>
+      <para><emphasis>Tainted</emphasis>-förvaringsplatsen inkluderar paket som är
+släppt under en Fri licens. Huvudsakliga kriterier för att placera paket i
+denna förvaringsplats är att de kan motverka patent och kopierinsskyddslagar
+i några länder, exempelvis multimedia-</para>
+    </listitem>
+  </itemizedlist>
+</section>
\ No newline at end of file
diff --git a/docs/installer/sv/minimal-install.xml b/docs/installer/sv/minimal-install.xml
new file mode 100644
index 00000000..b23dbcc5
--- /dev/null
+++ b/docs/installer/sv/minimal-install.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="sv" xml:id="minimal-install">
+    <!--2012-12-26 marja - exported this section from choosePackages.xml to start a new page-->
+<!--2013-05-05 marja - added screenshot and s/next/related/ -->
+<info>
+      <title xml:id="minimal-install-ti1">Minimal installation</title>
+    </info>
+
+    
+    
+
+    <para>You can choose a Minimal Installation by de-selecting everything in the
+Package Group Selection screen, see <xref
+linkend="choosePackageGroups"></xref>.</para>
+    <para>Minimal Installation is intended for those with specific uses in mind for
+their <application>Mageia</application>, such as a server or a specialised
+workstation. You will probably use this option combined with Manual Package
+Selection, see <xref linkend="choosePackagesTree"></xref>.</para>
+    <para>If you choose this installation class, then the related screen will offer
+you a few useful extras to install, such as documentation and X.</para>
+
+<mediaobject>
+<imageobject> <imagedata revision="1" fileref="dx2-minimal-install.png"
+align="center" format="PNG" xml:id="minimal-install-im1"></imagedata>
+</imageobject></mediaobject>
+
+  </section>
+
diff --git a/docs/installer/sv/selectInstallClass.xml b/docs/installer/sv/selectInstallClass.xml
new file mode 100644
index 00000000..be50289b
--- /dev/null
+++ b/docs/installer/sv/selectInstallClass.xml
@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="utf-8"?>
+<section xmlns="http://docbook.org/ns/docbook"
+ xmlns:ns6="http://www.w3.org/1999/xlink"
+ xmlns:ns5="http://www.w3.org/1998/Math/MathML"
+ xmlns:ns4="http://www.w3.org/1999/xhtml"
+ xmlns:ns3="http://www.w3.org/2000/svg"
+ xmlns:ns="http://docbook.org/ns/docbook"
+ version="5.0" xml:lang="sv" xml:id="selectInstallClass">
+
+  
+
+  
+
+  
+
+  
+
+  
+  
+
+  <info>
+    <!-- Made by marja on 2012 03 18 -->
+<!-- NEEDS TO BE REVIEWED! -->
+<!-- 20120405 updated JohnR -->
+<!-- enhanced xml code for screenshot, removed para xml:id's, changed "you'll" to
+      "you will" and "don't" to "do not" and a passive to an active tense, marja, 20120409-->
+<!-- barjac 2012-04-10 In the spirit of KISS reverted to my initial basic version -->
+<!-- 2013-05-05 marja, corrected typo in screenshot name, removed  -->
+<title xml:id="selectInstallClass-ti1">Install or Upgrade</title>
+  </info>
+
+  <mediaobject>
+<imageobject> <imagedata fileref="dx2-selectInstallClass.png" align="center"
+format="PNG"></imagedata> </imageobject></mediaobject>
+
+  <itemizedlist>
+    <listitem>
+      <para>Install</para>
+
+      <para>Välj detta alternativ för en fräsch
+<application>Mageia</application>-installation.</para>
+    </listitem>
+
+    <listitem>
+      <para>Upgrade</para>
+
+      <para>If you have one or more <application>Mageia 2</application> installations on
+your system, the installer will allow you to upgrade one of them to the
+latest release.</para>
+    </listitem>
+  </itemizedlist>
+
+  <note>
+    <para>If during install you decide to stop the installation, it is possible to
+reboot, but please think twice before you do this. Once a partition has been
+formatted or updates have started to be installed, your computer isn't in
+the same state anymore and rebooting it could very well leave you with an
+unusable system. If in spite of that you are very sure rebooting is what you
+want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl
+F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl
+Delete</guilabel> simultaneously to reboot.</para>
+  </note>
+
+  <tip>
+    <para>If you have discovered that you forgot to select an additional language, you
+can return from the "Install or Upgrade" screen to the language choice
+screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do
+<emphasis>not</emphasis> do this later in the install.</para>
+  </tip>
+</section>
diff --git a/docs/installer/sv/selectKeyboard.xml b/docs/installer/sv/selectKeyboard.xml
new file mode 100644
index 00000000..ff6817f5
--- /dev/null
+++ b/docs/installer/sv/selectKeyboard.xml
@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="utf-8"?>
+<section version="5.0" xml:lang="sv" xml:id="selectKeyboard"
+         xmlns="http://docbook.org/ns/docbook"
+         xmlns:xlink="http://www.w3.org/1999/xlink"
+         xmlns:ns5="http://www.w3.org/1999/xhtml"
+         xmlns:ns4="http://www.w3.org/2000/svg"
+         xmlns:ns3="http://www.w3.org/1998/Math/MathML"
+         xmlns:ns="http://docbook.org/ns/docbook">
+  
+
+  
+
+  <info>
+    <!-- Started by marja on 2012 03 31 -->
+<!-- NEEDS TO BE REVIEWED! -->
+<title xml:id="selectKeyboard-ti1">Keyboard</title>
+  </info>
+
+  <para revision="1" xml:id="selectKeyboard-pa1">DrakX selects an appropriate keyboard for your language. If no suitable
+keyboard is found it will default to a US keyboard layout.</para>
+
+  <mediaobject>
+<imageobject> <imagedata align="center" fileref="dx2-selectKeyboard.png" />
+</imageobject></mediaobject>
+
+  <itemizedlist>
+    <listitem>
+      <para revision="1" xml:id="selectKeyboard-pa2">Make sure that the selection is correct or choose another keyboard
+layout. If you don't know which layout your keyboard has, look in the
+specifications that came with your system, or ask the computer vendor. There
+may even be a label on the keyboard that identifies the layout. You can also
+look here: <link
+xlink:href="http://en.wikipedia.org/wiki/Keyboard_layout">en.wikipedia.org/wiki/Keyboard_layout</link></para>
+    </listitem>
+
+    <listitem>
+      <para revision="1" xml:id="selectKeyboard-pa3">Om ditt tangentbord inte finns i nedanstående lista, klicka på
+<guibutton>Fler</guibutton> för att få en fullständig lista och välj ditt
+tangentbord där.</para>
+
+      <para revision="1"><warning>
+          <para revision="1" xml:id="selectKeyboard-pa5">After choosing a keyboard from the <guibutton>More</guibutton> dialog,
+you'll return to the first keyboard choice dialog and it will seem as though
+a keyboard from that screen was chosen. You can safely ignore this anomaly
+and continue the installation: Your keyboard is the one you chose from the
+full list.</para>
+        </warning></para>
+    </listitem>
+
+    <listitem>
+      <para revision="1" xml:id="selectKeyboard-pa4">If you choose a keyboard based on non-Latin characters, you will see an
+extra dialog screen asking how you would prefer to switch between the Latin
+and non-Latin keyboard layouts</para>
+    </listitem>
+  </itemizedlist>
+</section>
diff --git a/docs/installer/sv/selectMouse.xml b/docs/installer/sv/selectMouse.xml
new file mode 100644
index 00000000..a52a127b
--- /dev/null
+++ b/docs/installer/sv/selectMouse.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="selectMouse" version="5.0" xml:lang="sv">
+
+  <info>
+    <title xml:id="selectMouse-ti1">Select mouse</title>
+  </info>
+
+  
+
+  
+  
+  
+  
+  
+  
+   <mediaobject>
+<!-- Made by marja on 2012 04 11 -->
+<!-- NEEDS TO BE REVIEWED! -->
+<!-- adding some "real" text now that we know the page shows up in the right place-->
+<!-- marja 2012-04-24 adding screenshot -->
+<imageobject> <imagedata fileref="dx2-selectMouse.png" align="center"
+format="PNG" > </imagedata> </imageobject></mediaobject>
+
+  <para revision="2" xml:id="selectMouse-pa1">If you are not happy with how your mouse responds, you can select a
+different one here.</para>
+
+ <para revision="2" xml:id="selectMouse-pa2">Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB
+mice</guilabel> is a good choice.</para>
+
+  <para revision="2" xml:id="selectMouse-pa3">Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to
+configure the buttons that do not work on a mouse with six or more buttons.</para>
+</section>