From cb86d82bc23852fad47e1092917312bfd4ef8b54 Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Sat, 6 Jul 2013 06:04:38 +0000 Subject: Make threshold to be 0% to avoid broken docs. --- docs/installer/makedoc.sh | 2 +- docs/installer/sv.po | 2 +- docs/installer/sv/addUser.xml | 153 +++++++++++++++++++++++++++ docs/installer/sv/add_supplemental_media.xml | 45 ++++++++ docs/installer/sv/choosePackageGroups.xml | 40 +++++++ docs/installer/sv/choosePackagesTree.xml | 23 ++++ docs/installer/sv/configureX_monitor.xml | 83 +++++++++++++++ docs/installer/sv/doPartitionDisks.xml | 117 ++++++++++++++++++++ docs/installer/sv/formatPartitions.xml | 43 ++++++++ docs/installer/sv/installer.xml | 149 ++++++++++++++++++++++++++ docs/installer/sv/media_selection.xml | 45 ++++++++ docs/installer/sv/minimal-install.xml | 27 +++++ docs/installer/sv/selectInstallClass.xml | 70 ++++++++++++ docs/installer/sv/selectKeyboard.xml | 56 ++++++++++ docs/installer/sv/selectMouse.xml | 31 ++++++ 15 files changed, 884 insertions(+), 2 deletions(-) create mode 100644 docs/installer/sv/addUser.xml create mode 100644 docs/installer/sv/add_supplemental_media.xml create mode 100644 docs/installer/sv/choosePackageGroups.xml create mode 100644 docs/installer/sv/choosePackagesTree.xml create mode 100644 docs/installer/sv/configureX_monitor.xml create mode 100644 docs/installer/sv/doPartitionDisks.xml create mode 100644 docs/installer/sv/formatPartitions.xml create mode 100644 docs/installer/sv/installer.xml create mode 100644 docs/installer/sv/media_selection.xml create mode 100644 docs/installer/sv/minimal-install.xml create mode 100644 docs/installer/sv/selectInstallClass.xml create mode 100644 docs/installer/sv/selectKeyboard.xml create mode 100644 docs/installer/sv/selectMouse.xml (limited to 'docs') diff --git a/docs/installer/makedoc.sh b/docs/installer/makedoc.sh index a3802cb6..1d9465b8 100755 --- a/docs/installer/makedoc.sh +++ b/docs/installer/makedoc.sh @@ -9,7 +9,7 @@ for doc in acceptLicense addUser ask_mntpoint_s installer selectInstallClass \ configureX_card_list configureX_monitor configureX_chooser \ setupBootloaderAddEntry minimal-install securityLevel selectCountry media_selection add_supplemental_media; do - po4a-translate -k 1 --format docbook --master-charset utf-8 --localized-charset utf-8 \ + po4a-translate -k 0 --format docbook --master-charset utf-8 --localized-charset utf-8 \ --master en/${doc}.xml \ --po $LANG.po --localized $LANG/${doc}.xml perl -i -p -e "s/version=\"5\.0\"/version=\"5\.0\" xml:lang=\"$LANG\"/;" $LANG/${doc}.xml diff --git a/docs/installer/sv.po b/docs/installer/sv.po index faa52606..ec6a6094 100644 --- a/docs/installer/sv.po +++ b/docs/installer/sv.po @@ -2015,7 +2015,7 @@ msgstr "" #. type: Attribute 'xml:lang' of:
#: en/DrakX.xml:1 en/media_selection.xml:1 en/add_supplemental_media.xml:2 msgid "en" -msgstr "en" +msgstr "sv" #. type: Content of:
#: en/DrakX.xml:3 diff --git a/docs/installer/sv/addUser.xml b/docs/installer/sv/addUser.xml new file mode 100644 index 00000000..b0bdb385 --- /dev/null +++ b/docs/installer/sv/addUser.xml @@ -0,0 +1,153 @@ +<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="addUser" version="5.0" xml:lang="sv"> + + <info> + <title xml:id="addUser-ti1">Hantering av användare och administratör + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + Ställ in ett administratörs (root) -lösenord: + + + Det är + + + Alla lösenord är skifteslägeskänsliga, det bästa är att använda en blandning +av bokstäver (stora och små), nummer och andra karaktärer i ett lösenord. + +
+ +
+ + Ange en användare + + + Lägg till en användare här. En användare har färre rättigheter än en +administratör (root), men tillräckligt för att surfa på nätet, använda +kontorsapplikationer eller spela spel och allting annat som den generella +användaren gör med sin dator + + + + Ikon: om du klickar på den här knappen så kommer det +att ändra användarens ikon. + + + + Riktigt namn: Skriv in användarens riktiga namn i detta +fält. + + + + Inloggningsnamn: Här kan du skriva in användarens +inloggningsnamn eller låta drakx använda en version av användarens riktiga +namn. Inloggningsnamnet är skifteslägeskänsligt + + + + Password: In this text box you should type in the user +password. There is a shield at the end of the text box that indicates the +strength of the password. (See also ) + + + + Password (again): Retype the user password into this +text box and drakx will check you have the same password in each of the user +password text boxes. + + + + + Alla användare som du lägger till under installationen av Mageia kommer att +ha en värdsligt läsbar (men skrivskyddad) hem-mapp. + + Hur som helst, när du använder din nya installation så kommer alla användare +som du lägger till i MCC - System - Hantera användare i +systemet att ha en Hem-mapp som är både läs och skrivskyddad. + + If you don't want a world readable home directory for anyone, it is advised +to only add a temporary user now and to add the real one(s) after reboot. + + If you prefer world readable home directories, you might want to add all +extra needed users in the Configuration - Summary step +during the install. Choose User management. + + The access permissions can also be changed after the install. + + +
+ +
+ + Avancerad hantering av användare + + + If the advanced button is clicked you are offered a +screen that allows you to edit the settings for the user you are +adding. Additionally, you can disable or enable a guest account. + + + Anything a guest with a default rbash guest account +saves to his /home directory will be erased when he logs out. The guest +should save his important files to a USB key. + + + + + Enable guest account: Here you can enable or disable a +guest account. The guest account allows a guest to log into and use the PC, +but he has more restricted access than normal users. + + + + Shell: This drop down list allows you to change the +shell used by the user you are adding in the previous screen, options are +Bash, Dash and Sh + + + + User ID: Here you can set the user ID for the user you +are adding in the previous screen. This is a number. Leave it blank unless +you know what you are doing. + + + + Group ID: This lets you set the group ID. Also a +number, usually the same one as for the user. Leave it blank unless you know +what you are doing. + + +
+
\ No newline at end of file diff --git a/docs/installer/sv/add_supplemental_media.xml b/docs/installer/sv/add_supplemental_media.xml new file mode 100644 index 00000000..e2d95978 --- /dev/null +++ b/docs/installer/sv/add_supplemental_media.xml @@ -0,0 +1,45 @@ + +
+ + Val av medier (Konfigurera kompletterande installationsmedier) + + + + + + + + + + + + + Denna ruta ger dig en lista över redan upptäckta förvaringsplatser. Du kan +lägga till andra källor för paket, till exempel en optisk skiva eller en +fjärrstyrd källa. Valet av källa avgör vilka paket som kommer att göras +tillgängliga för val under nästa steg. + + För en nätverkskälla så finns det två steg att följa: + + + + Val och aktivering av nätverket om det inte redan är uppe. + + + + Väljer en spegel eller specificera en URL (allra första posten). Genom att +välja en spegel så har du tillgång till urvalet av alla förvaringsplatser +som hanteras av Mageia, till exempel non-free, tainted och uppdateringarna +som de ger. Med denna URL så kan du utse en specifik förvaringsplats eller +din egen NFS-installation. + + +
diff --git a/docs/installer/sv/choosePackageGroups.xml b/docs/installer/sv/choosePackageGroups.xml new file mode 100644 index 00000000..77a53fac --- /dev/null +++ b/docs/installer/sv/choosePackageGroups.xml @@ -0,0 +1,40 @@ +
+ + + Val av paketgrupp + + + + + + + + + Packages have been sorted into groups, to make choosing what you need on +your system a lot easier. The groups are fairly self explanatory, however +more information about the content of each is available in tool-tips which +become visible as the mouse is hovered over them. + + + + Workstation. + + + + Server. + + + + Graphical Environment. + + + + Individual Package Selection: You can use this option to manually add or +remove packages. + + + Read for instructions on how to do a +minimal install. +
+ diff --git a/docs/installer/sv/choosePackagesTree.xml b/docs/installer/sv/choosePackagesTree.xml new file mode 100644 index 00000000..7c818807 --- /dev/null +++ b/docs/installer/sv/choosePackagesTree.xml @@ -0,0 +1,23 @@ +
+ + + Choose Individual Packages + + + + + + + + + Here you can add or remove any extra packages to customise your +installation. + + After having made your choice, you can click on the floppy +icon at the bottom of the page to save your choice of packages +(saving to a USB key works, too). You can then use this file to install the +same packages on another system, by pressing the same button during install +and choosing to load it. +
+ diff --git a/docs/installer/sv/configureX_monitor.xml b/docs/installer/sv/configureX_monitor.xml new file mode 100644 index 00000000..667e4ebe --- /dev/null +++ b/docs/installer/sv/configureX_monitor.xml @@ -0,0 +1,83 @@ + +
+ + + + + + + + + + + + + +Att välja din skärm + + + DrakX has a very comprehensive database of monitors and will usually +correctly identify yours. + + + Selecting a monitor with different characteristics could damage +your monitor or video hardware. Please don't try something without knowing +what you are doing. If in doubt you should consult your monitor +documentation + + + + + + Anpassad + + This option allows you to set two critical parameters, the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed. + + It is VERY IMPORTANT that you do not specify a monitor +type with a sync range that is beyond the capabilities of your monitor: you +may damage your monitor. If in doubt, choose a conservative setting and +consult your monitor documentation. + + Plug 'n Play + + This is the default option and tries to determine the monitor type from the +monitor database. + + Tillverkare + + Om installationen inte har upptäckt ditt rätta grafikkort och du vet vilket +du har så kan du välja det från trädet genom att välja: + + tillverkare + + + + the monitor manufacturers name + + + + beskrivning av skärmen + + + + Standard + + selecting this group displays nearly 30 display configurations such as +1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is +often a good monitor selection group if you need to use the Vesa card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections. +
diff --git a/docs/installer/sv/doPartitionDisks.xml b/docs/installer/sv/doPartitionDisks.xml new file mode 100644 index 00000000..47cf05fa --- /dev/null +++ b/docs/installer/sv/doPartitionDisks.xml @@ -0,0 +1,117 @@ +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Partitioning + + + In this screen you can see the content of your hard drive(s) and see the +solutions the DrakX partitioning wizard found for where to install +Mageia. + + The options available from the list below will vary depending on your +particular hard drive(s) layout and content. + + + + + + + Use Existing Partitions + + If this option is available, then existing Linux compatible partitions have +been found and may be used for the installation. + + + + Use Free Space + + If you have unused space on your hard drive then this option will use it for +your new Mageia installation. + + + + Use Free Space on a Windows Partition + + If you have unused space on an existing Windows partition, the installer may +offer to use it. + + This can be a useful way of making room for your new Mageia installation, +but is a risky operation so you should make sure you have backed up all +important files! + + Note that this involves shrinking the size of the Windows partition. The +partition must be "clean", meaning that Windows must have closed down +correctly the last time it was used. It must also have been defragmented, +although this is not a guarantee that all files in the partition have been +moved out of the area that is about to be used. It is highly recommended to +back up your personal files. + + + + Erase and use Entire Disk. + + This option will use the complete drive for Mageia. + + Note! This will erase ALL data on the selected hard drive. Take care! + + If you intend to use part of the disk for something else, or you already +have data on the drive that you are not prepared to lose, then do not use +this option. + + + + Custom + + This gives you complete control over the placing of the installation on your +hard drive(s). + + + + + Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512 byte logical sectors. Due to lack of available +hardware, the partitioning tool used in the installer has not been tested +with such a drive. Also some ssd drives now use an erase block size over 1 +MB. We suggest to pre-partition the drive, using an alternative partitioning +tool like gparted, if you own such a device, and to use the following +settings: + + "Align to" "MiB" + + "Free space preceding (MiB)" "2" + + Also make sure all partitions are created with an even number of megabytes. + +
\ No newline at end of file diff --git a/docs/installer/sv/formatPartitions.xml b/docs/installer/sv/formatPartitions.xml new file mode 100644 index 00000000..d401779a --- /dev/null +++ b/docs/installer/sv/formatPartitions.xml @@ -0,0 +1,43 @@ +
+ + + Formatting + + + + + + + + + + + + + + + + + + + + + Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be saved. + + Usually at least the partitions DrakX selected, need to be formatted + + Click on Advanced to choose partitions you want to +check for so called bad blocks + + + If you're not sure you have made the right choice, you can click on +Previous, again on Previous +and then on Custom to get back to the main screen. +In that screen you can choose to view what is in your partitions. + + + När du är säker på ditt val, klicka på Nästa för att +fortsätta. +
diff --git a/docs/installer/sv/installer.xml b/docs/installer/sv/installer.xml new file mode 100644 index 00000000..a315b2f3 --- /dev/null +++ b/docs/installer/sv/installer.xml @@ -0,0 +1,149 @@ +
+ + + + + + + + + + + + + + + + + + + + +Mageia-installeraren DrakX + + + Whether you are new to GNU-Linux or an experienced user, the Mageia +Installer is designed to help make your installation or upgrade as easy as +possible. + + + + +The initial menu screen has various options, however the default one will +start the installer, which will normally be all that you will need. + +
+ + Välkomstskärm till installationen + + +
+ + If there are problems during install, then it may be necessary to use +special installation options, see . + +
+ + The installation steps + + + The install process is divided into a number of steps, which can be followed +on the side panel of the screen. + + Each step has one or more screens which may also have +Advanced buttons with extra, less commonly required, +options. + + Most screens have Help buttons which give further +explanations about the current step. + + + If somewhere during install you decide to stop the installation, it is +possible to reboot, but please think twice before you do this. Once a +partition has been formatted or updates have started to be installed, your +computer is no longer in the same state and rebooting it could very well +leave you with an unusable system. If in spite of this you are very sure +rebooting is what you want, go to a text terminal by pressing the three keys +Alt Ctrl F2 at the same time. After that, press +Alt Ctrl Delete simultaneously to reboot. + +
+ +
+ + Installationsalternativ + + + If the installation fails then it may be necessary to try again by using one +of the extra options available by hitting the F1 +(Help) key see + + This will open the following text based help. + +
+ + Hjälpskärm för installation + + +
+ +
+ + Installation Problems and Possible Solutions + + +
+ + No Graphical Interface + + + + + After the initial screen you did not reach the language selection +screen. This can happen with some graphic cards and older systems. Try using +low resolution by typing vgalo at the prompt. + + + + If the hardware is very old, a graphical installation may not be +possible. In this case it is worth trying a text mode installation. To use +this hit ESC at the first welcome screen and confirm with ENTER. You will be +presented with a black screen with the word "boot:". Type "text" and hit +ENTER. Now continue with the installation in text mode. + + +
+ +
+ + The Install Freezes + + + If the system appeared to freeze during the installation, this may be a +problem with hardware detection. In this case the automatic detection of +hardware may be bypassed and dealt with later. To try this, type +noauto at the prompt. This option may also be combined with +other options as necessary. +
+ +
+ + Kernel Options + + + These will rarely be needed, but in some cases the hardware may report the +available RAM incorrectly. To specify this manually, you can use the +mem=xxxM parameter, where xxx is the correct amount of +RAM. e.g. mem=256M would specify 256MB of RAM. +
+
+
+
\ No newline at end of file diff --git a/docs/installer/sv/media_selection.xml b/docs/installer/sv/media_selection.xml new file mode 100644 index 00000000..4c306a31 --- /dev/null +++ b/docs/installer/sv/media_selection.xml @@ -0,0 +1,45 @@ +
+ + Val av media (Nonfree) + + + + + + + + + + + + + + + Here you have the list of available repositories. Not all repositories are +available, according to which media you use for installing. The repositories +selection determines which packages will be available for selection during +the next steps. + + + + The Core repository cannot be disabled as it contains +the base of the distribution. + + + + The Non-free repository includes packages that are +free-of-charge, i.e. Mageia may redistribute them, but they contain +closed-source software (hence the name - Nonfree). For example this +repository includes nVidia and ATI graphics card proprietary drivers, +firmware for various WiFi cards, etc. + + + + Tainted-förvaringsplatsen inkluderar paket som är +släppt under en Fri licens. Huvudsakliga kriterier för att placera paket i +denna förvaringsplats är att de kan motverka patent och kopierinsskyddslagar +i några länder, exempelvis multimedia- + + +
\ No newline at end of file diff --git a/docs/installer/sv/minimal-install.xml b/docs/installer/sv/minimal-install.xml new file mode 100644 index 00000000..b23dbcc5 --- /dev/null +++ b/docs/installer/sv/minimal-install.xml @@ -0,0 +1,27 @@ +
+ + + + Minimal installation + + + + + + You can choose a Minimal Installation by de-selecting everything in the +Package Group Selection screen, see . + Minimal Installation is intended for those with specific uses in mind for +their Mageia, such as a server or a specialised +workstation. You will probably use this option combined with Manual Package +Selection, see . + If you choose this installation class, then the related screen will offer +you a few useful extras to install, such as documentation and X. + + + + + +
+ diff --git a/docs/installer/sv/selectInstallClass.xml b/docs/installer/sv/selectInstallClass.xml new file mode 100644 index 00000000..be50289b --- /dev/null +++ b/docs/installer/sv/selectInstallClass.xml @@ -0,0 +1,70 @@ + +
+ + + + + + + + + + + + + + + + + + + +Install or Upgrade + + + + + + + + Install + + Välj detta alternativ för en fräsch +Mageia-installation. + + + + Upgrade + + If you have one or more Mageia 2 installations on +your system, the installer will allow you to upgrade one of them to the +latest release. + + + + + If during install you decide to stop the installation, it is possible to +reboot, but please think twice before you do this. Once a partition has been +formatted or updates have started to be installed, your computer isn't in +the same state anymore and rebooting it could very well leave you with an +unusable system. If in spite of that you are very sure rebooting is what you +want, go to a text terminal by pressing the three keys Alt Ctrl +F2 at the same time. After that, press Alt Ctrl +Delete simultaneously to reboot. + + + + If you have discovered that you forgot to select an additional language, you +can return from the "Install or Upgrade" screen to the language choice +screen by pressing Alt Ctrl Home. Do +not do this later in the install. + +
diff --git a/docs/installer/sv/selectKeyboard.xml b/docs/installer/sv/selectKeyboard.xml new file mode 100644 index 00000000..ff6817f5 --- /dev/null +++ b/docs/installer/sv/selectKeyboard.xml @@ -0,0 +1,56 @@ + +
+ + + + + + + +Keyboard + + + DrakX selects an appropriate keyboard for your language. If no suitable +keyboard is found it will default to a US keyboard layout. + + + + + + + + Make sure that the selection is correct or choose another keyboard +layout. If you don't know which layout your keyboard has, look in the +specifications that came with your system, or ask the computer vendor. There +may even be a label on the keyboard that identifies the layout. You can also +look here: en.wikipedia.org/wiki/Keyboard_layout + + + + Om ditt tangentbord inte finns i nedanstående lista, klicka på +Fler för att få en fullständig lista och välj ditt +tangentbord där. + + + After choosing a keyboard from the More dialog, +you'll return to the first keyboard choice dialog and it will seem as though +a keyboard from that screen was chosen. You can safely ignore this anomaly +and continue the installation: Your keyboard is the one you chose from the +full list. + + + + + If you choose a keyboard based on non-Latin characters, you will see an +extra dialog screen asking how you would prefer to switch between the Latin +and non-Latin keyboard layouts + + +
diff --git a/docs/installer/sv/selectMouse.xml b/docs/installer/sv/selectMouse.xml new file mode 100644 index 00000000..a52a127b --- /dev/null +++ b/docs/installer/sv/selectMouse.xml @@ -0,0 +1,31 @@ +
+ + + Select mouse + + + + + + + + + + + + + + + + + + If you are not happy with how your mouse responds, you can select a +different one here. + + Usually, Universal - Any PS/2 and USB +mice is a good choice. + + Select Universal - Force evdev to +configure the buttons that do not work on a mouse with six or more buttons. +
-- cgit v1.2.1