Update installer docs++

31 files changed, 839 insertions, 168 deletions

diff --git a/docs/installer/cs/DrakX-cover.xml b/docs/installer/cs/DrakX-cover.xml
new file mode 100644
index 00000000..723f37b0
--- /dev/null
+++ b/docs/installer/cs/DrakX-cover.xml
@@ -0,0 +1,154 @@
+<?xml version='1.0' encoding='utf-8'?>
+<!-- Converted by db4-upgrade version 1.0 -->
+<book xmlns="http://docbook.org/ns/docbook" xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:ns6="http://www.w3.org/1999/xlink" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xhtml" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="Quick-Startup">
+  <info>
+    <title>Instalace pomocí DrakX</title>
+   <publisher> <publishername>Mageia.org</publishername> </publisher>
+   <revhistory>
+     <revision>
+          <date>Únor 2014</date>
+        <revremark>Mageia 4</revremark>
+     </revision>
+   </revhistory>
+    <cover>
+        <para role="tagline">Oficiální dokumentace pro Mageia</para>
+      <mediaobject>
+<imageobject> <imagedata fileref="mageia-2013.png"/> </imageobject></mediaobject>
+  <info>
+    <title>Instalace pomocí DrakX</title>
+   <publisher> <publishername>Mageia.org</publishername> </publisher>
+   <revhistory>
+     <revision>
+          <date>Únor 2014</date>
+        <revremark>Mageia 4</revremark>
+     </revision>
+   </revhistory>
+   </info>
+    </cover>
+  </info>
+  <article>
+  
+
+
+
+
+
+       <!-- 2013-01-03 removed link to choosePackages.xml, because there is no link to it in installer. link to setupX has been removed for the same reason, before-->
+<!--2013-03-31 removed link to setupBootloaderBeginner.xml, because that page is no longer needed -->
+<!--2013-05-10 hid includes for resizeFATchoose.xml and takeOverHdChoose.xml, because since over a year ago, no one in docteam managed to make a screenshot of those installer screens. They seem to already have been obsoleted in Mandriva -->
+<!--2013-05-10 put ask_mntpoint_s.xml before takeOverHdConfirm.xml, to better reflect the order in which the links to them appear in doPartitionDisks.xml -->
+<!--2013-12-08 add soundConfig.xml -->
+<para><note>
+          <para>No one will see all the installer screens that you see in this manual. Which
+screens you will see, depends on your hardware and the choices you make
+while installing.</para>
+        </note></para>
+
+      <para>The texts and screenshots in this manual are available under the CC BY-SA
+3.0 license <link
+ns6:href="http://creativecommons.org/licenses/by-sa/3.0/">http://creativecommons.org/licenses/by-sa/3.0/</link>.</para>
+
+      <para>This manual was produced with the help of the <link
+ns6:href="http://www.calenco.com">Calenco CMS</link> developed by <link
+ns6:href="http://www.neodoc.biz">NeoDoc</link>.</para>
+
+      <para>It was written by volunteers in their free time. Please contact <link
+ns6:href="https://wiki.mageia.org/en/Documentation_team">Documentation
+Team</link>, if you would like to help improve this manual.</para>
+  
+  
+
+  <!-- <xi:include href="drakx-intro.xml"/>
+ -->
+<xi:include href="installer.xml"/>
+
+  <xi:include href="selectLanguage.xml"/>
+
+  <xi:include href="acceptLicense.xml"/>
+
+  <xi:include href="setupSCSI.xml"/>
+
+  <xi:include href="selectInstallClass.xml"/>
+
+  <xi:include href="selectKeyboard.xml"/>
+
+  <xi:include href="doPartitionDisks.xml"/>
+
+ 
+
+  <!-- <xi:include href="resizeFATChoose.xml"/>
+
+
+  <xi:include href="takeOverHdChoose.xml"/> -->
+<xi:include href="ask_mntpoint_s.xml"/>
+
+<xi:include href="takeOverHdConfirm.xml"/>
+
+  <xi:include href="diskdrake.xml"/>
+
+  <xi:include href="formatPartitions.xml"/>
+
+<xi:include href="add_supplemental_media.xml"/>
+
+<xi:include href="media_selection.xml"/>
+
+<xi:include href="chooseDesktop.xml"></xi:include>
+
+<xi:include href="choosePackageGroups.xml"></xi:include>
+
+<xi:include href="minimal-install.xml"></xi:include>
+
+<xi:include href="choosePackagesTree.xml"></xi:include>
+
+  
+
+  <!-- <xi:include href="setRootPassword.xml">
+</xi:include> -->
+<xi:include href="addUser.xml"/>
+
+  <xi:include href="configureX_chooser.xml"/>
+
+  <xi:include href="configureX_card_list.xml"/>
+
+  <xi:include href="configureX_monitor.xml"/>
+
+  <xi:include href="setupBootloader.xml"/>
+
+  <xi:include href="setupBootloaderAddEntry.xml"/>
+
+  
+
+  <!-- <xi:include href="setupYabootGeneral.xml">
+</xi:include>
+  
+  <xi:include href="setupYabootAddEntry.xml"></xi:include>
+  
+  <xi:include href="summary.xml"></xi:include> -->
+<xi:include href="misc-params.xml"/>
+
+<xi:include href="configureTimezoneUTC.xml"></xi:include>
+ 
+<xi:include href="selectCountry.xml"></xi:include>
+
+<xi:include href="configureServices.xml"></xi:include>
+
+<xi:include href="selectMouse.xml"/>
+
+<xi:include href="soundConfig.xml"/>
+
+  <xi:include href="securityLevel.xml"></xi:include>
+
+
+  
+
+  <!-- <xi:include href="configureNetwork.xml">
+</xi:include> -->
+<xi:include href="installUpdates.xml"/>
+
+  <xi:include href="exitInstall.xml"/>
+
+  
+  <!--STILL TO BE WRITTEN: <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="uninstall-Mageia.xml"/>
+ -->
+</article>
+</book>
diff --git a/docs/installer/cs/DrakX.xml b/docs/installer/cs/DrakX.xml
index 8f0dd64b..f1ee6909 100644
--- a/docs/installer/cs/DrakX.xml
+++ b/docs/installer/cs/DrakX.xml
@@ -5,10 +5,11 @@
 <!--2013-05-10 hid includes for resizeFATchoose.xml and takeOverHdChoose.xml, because since over a year ago, no one in docteam managed to make a screenshot of those installer screens. They seem to already have been obsoleted in Mandriva -->
 <!--2013-05-10 put ask_mntpoint_s.xml before takeOverHdConfirm.xml, to better reflect the order in which the links to them appear in doPartitionDisks.xml -->
 <!--2013-12-08 add soundConfig.xml -->
+<!--2014-05-07 add selectAndUseISOs2.xml Papoteur-->
 <!-- <xi:include href="drakx-intro.xml"/>
  -->
 <info>
-    <title>Installation with DrakX</title>
+    <title>Instalace pomocí DrakX</title>
 
     <cover>
       <para><note>
@@ -37,9 +38,12 @@ Team</link>, if you would like to help improve this manual.</para>
 
 
 
+
   
   
 
+  <xi:include href="SelectAndUseISOs2.xml"/>
+
   <xi:include href="installer.xml"/>
 
   <xi:include href="selectLanguage.xml"/>
diff --git a/docs/installer/cs/SelectAndUseISOs2.xml b/docs/installer/cs/SelectAndUseISOs2.xml
new file mode 100644
index 00000000..1d4220fc
--- /dev/null
+++ b/docs/installer/cs/SelectAndUseISOs2.xml
@@ -0,0 +1,411 @@
+<?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="Select-and-use-ISOs" version="5.0" xml:lang="cs">
+
+  <info>
+    <!-- Made by Lebarhon 2014 03 26 -->
+<title xml:id="Select-and-use-ISOs-ti1">Select and use ISOs</title>
+  </info>
+
+  <section>
+    <title>Media</title>
+
+    <section>
+      <title>Definition</title>
+
+      <para>We call a media here a ISO image file that allows to install and/or update
+Mageia and by extension any physical support where the ISO file is copied.</para>
+
+      <para>You can find them <link
+ns4:href="http://www.mageia.org/en/downloads/">here</link>.</para>
+    </section>
+
+    <section>
+      <title>Classical installation media</title>
+
+      <section>
+        <title>Common features</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>They use the traditional installer called drakx.</para>
+          </listitem>
+
+          <listitem>
+            <para>They are able to make a clean install or an update from previous releases.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>DVD</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Different media for architecture 32 or 64 bits.</para>
+          </listitem>
+
+          <listitem>
+            <para>Some tools are available in the Welcome screen: Rescue System, Memory Test,
+Hardware Detection Tool.</para>
+          </listitem>
+
+          <listitem>
+            <para>Each DVD contains any available desktop environments and languages.</para>
+          </listitem>
+
+          <listitem>
+            <para>You'll be given the choice during the installation to add or not non free
+software.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>DVD dual arch</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Both architectures are present on the same media, the choice is made
+automatically according to the detected CPU.</para>
+          </listitem>
+
+          <listitem>
+            <para>Xfce desktop only.</para>
+          </listitem>
+
+          <listitem>
+            <para>Some languages only (be, bg, ca, de, en, es, fr, it, mk, pl, pt, ru, sv, uk)
+TO BE CHECKED!</para>
+          </listitem>
+
+          <listitem>
+            <para>It contains non free software.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+    </section>
+
+    <section>
+      <title>Live media</title>
+
+      <section>
+        <title>Common features</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Can be used to preview the distribution without first installing it on a
+HDD, and optionally install Mageia on your HDD.</para>
+          </listitem>
+
+          <listitem>
+            <para>ISO contains only one desktop environment (KDE or GNOME).</para>
+          </listitem>
+
+          <listitem>
+            <para>Different media for architecture 32 or 64 bits.</para>
+          </listitem>
+
+          <listitem>
+            <para><emphasis role="bold">Live ISOs can only be used to create clean
+installations, they cannot be used to upgrade from previous
+releases.</emphasis></para>
+          </listitem>
+
+          <listitem>
+            <para>They contains non free software.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>Live CD KDE</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>KDE desktop environment only.</para>
+          </listitem>
+
+          <listitem>
+            <para>English language only.</para>
+          </listitem>
+
+          <listitem>
+            <para>32 bits only.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>Live CD GNOME</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>GNOME desktop environment only.</para>
+          </listitem>
+
+          <listitem>
+            <para>English language only.</para>
+          </listitem>
+
+          <listitem>
+            <para>32 bits only.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>Live DVD KDE</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>KDE desktop environment only.</para>
+          </listitem>
+
+          <listitem>
+            <para>All languages are present.</para>
+          </listitem>
+
+          <listitem>
+            <para>Different media for architecture 32 or 64 bits.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>Live DVD GNOME</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>GNOME desktop environment only.</para>
+          </listitem>
+
+          <listitem>
+            <para>All languages are present.</para>
+          </listitem>
+
+          <listitem>
+            <para>Different media for architecture 32 or 64 bits.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+    </section>
+
+    <section>
+      <title>Boot-only CDs media</title>
+
+      <section>
+        <title>Common features</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Each one is a small image that contains no more than that which is needed to
+start the drakx installer and find the ISO file to continue and complete the
+install. These ISO files may be on the PC hard disk, on a local drive, on a
+local network or on the Internet.</para>
+          </listitem>
+
+          <listitem>
+            <para>These media are very light (less than 100 Mo) and are convenient when
+bandwidth is too low to download a full DVD, PC without DVD drive or PC that
+can't boot on a USB stick.</para>
+          </listitem>
+
+          <listitem>
+            <para>Different media for architecture 32 or 64 bits.</para>
+          </listitem>
+
+          <listitem>
+            <para>English language only.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>boot.iso</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Contains only free software, for people who refuse non free software.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+
+      <section>
+        <title>boot-nonfree.iso</title>
+
+        <itemizedlist>
+          <listitem>
+            <para>Contains non free software (mostly drivers, codecs...) for people who need
+it.</para>
+          </listitem>
+        </itemizedlist>
+      </section>
+    </section>
+  </section>
+
+  <section>
+    <title>Media downloading and checking</title>
+
+    <section>
+      <title>Downloading</title>
+
+      <para>Once you have chosen your ISO file, you can download it either using http or
+BitTorrent. In both cases, a window give you some information, like the used
+mirror and the possibility to change if the bandwidth is to low. If http is
+chosen, you can also see something like</para>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="Checking.png" contentwidth="650"/>
+</imageobject></mediaobject>
+
+      <para>md5sum and sha1sum are tools to check your ISO integrity. Use only one of
+them. Both hexadecimal numbers have been calculated by an algorithm from the
+file to be downloaded. If you ask this algorithm to calculate again this
+number from your downloaded file, either you have the same number and your
+downloaded file is correct, or the number is different and you met a
+failure. Then this window appears:</para>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="Download.png"/> </imageobject></mediaobject>
+
+      <para>Check the radio button Save File.</para>
+    </section>
+
+    <section>
+      <title>Checking the downloaded media integrity</title>
+
+      <para>Open a console, no need to be root, and:</para>
+
+      <para>- To use md5sum, type: [sam@localhost]$ <userinput>md5sum
+path/to/the/image/file.iso</userinput>.</para>
+
+      <para>- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum
+path/to/the/image/file.iso</userinput>.</para>
+
+      <para>and compare the obtained number on your computer (you may have to wait for a
+while) with the number given by Mageia. Example:</para>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="Md5sum.png" contentwidth="650"/>
+</imageobject></mediaobject>
+
+      <para/>
+    </section>
+  </section>
+
+  <section>
+    <title>Burn or dump the ISO</title>
+
+    <para>The checked ISO can now be burned on a CD or DVD or dumped on a USB
+stick. These operations are not a simple copy and aim at make a boot-able
+media.</para>
+
+    <section>
+      <title>Burn the ISO on a CD/DVD</title>
+
+      <para>Use whatever burner you want but ensure the burning device is set correctly
+to <emphasis role="bold">burn an image</emphasis>, burn data or files is not
+correct.  More information in <link
+ns4:href="https://wiki.mageia.org/en/Writing_CD_and_DVD_images">the Mageia
+wiki</link>.</para>
+    </section>
+
+    <section>
+      <title>Dump the ISO on a USB stick</title>
+
+      <para>All Mageia ISOs are hybrid, which means you can 'dump' them on a USB stick
+and use it to boot and install the system.</para>
+
+      <warning>
+        <para>"dumping" an image onto a flash device destroys any prior file-system in the
+partition; any data will be lost and partition capacity will be reduced to
+the image size.</para>
+      </warning>
+
+      <para>To recover the original capacity, you have to format the USB stick.</para>
+
+      <section>
+        <title>Using Mageia</title>
+
+        <para>You can use a graphical tool like <link
+ns4:href="https://wiki.mageia.org/en/IsoDumper_Writing_ISO_images_on_USB_sticks">IsoDumper</link></para>
+
+        <para>You can also use the dd tool in a console:</para>
+
+        <orderedlist>
+          <listitem>
+            <para>Open a console</para>
+          </listitem>
+
+          <listitem>
+            <para>Become root with the command <userinput>su -</userinput> (don't forget the
+final -)</para>
+
+            <mediaobject>
+<imageobject> <imagedata fileref="Root.png" contentwidth="650"/>
+</imageobject></mediaobject>
+          </listitem>
+
+          <listitem>
+            <para>Plug your USB stick (do not mount it, that means do not open any application
+or file manager that read it)</para>
+          </listitem>
+
+          <listitem>
+            <para>Enter the command <userinput>fdisk -l</userinput></para>
+
+            <mediaobject>
+<imageobject> <imagedata fileref="Fdisk.png" contentwidth="650"/>
+</imageobject></mediaobject>
+          </listitem>
+
+          <listitem>
+            <para>Find the device name for your USB stick (by its size), for example /dev/sdb
+in the screenshot above, it is a 8Go USB stick.</para>
+          </listitem>
+
+          <listitem>
+            <para>Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX
+bs=1M</userinput></para>
+
+            <para>(x)=your device name eg: /dev/sdc Example: # <userinput>dd
+if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb
+bs=1M</userinput></para>
+          </listitem>
+
+          <listitem>
+            <para>Enter the command: # <userinput>sync</userinput></para>
+          </listitem>
+
+          <listitem>
+            <para>Unplug your USB stick, it is done</para>
+          </listitem>
+        </orderedlist>
+      </section>
+
+      <section>
+        <title>Using Windows</title>
+
+        <para>You can try:</para>
+
+        <para>- <link ns4:href="http://rufus.akeo.ie/?locale=en_US">Rufus</link></para>
+
+        <para>- <link ns4:href="http://sourceforge.net/projects/win32diskimager">Win32
+Disk Imager</link></para>
+
+        <para/>
+      </section>
+    </section>
+  </section>
+
+  <section>
+    <title>Mageia Installation</title>
+
+    <para>This step is detailed in <link ns4:href="http://www.mageia.org/en/doc/">the
+Mageia documentation</link>.</para>
+
+    <para>More information, is available in <link
+ns4:href="https://wiki.mageia.org/en/Category:Documentation">the Mageia
+wiki</link>.</para>
+  </section>
+
+</section>
\ No newline at end of file
diff --git a/docs/installer/cs/addUser.xml b/docs/installer/cs/addUser.xml
index babafb69..47c7ab2a 100644
--- a/docs/installer/cs/addUser.xml
+++ b/docs/installer/cs/addUser.xml
@@ -51,14 +51,14 @@ just below the first password box, this checks that you have not mistyped
 the first password by comparing them.</para>
 
     <note xml:id="givePassword">
-      <para>All passwords are case sensitive, it is best to use a mixture of letters
-(upper and lower case), numbers and other characters in a password.</para>
+      <para>Všechna hesla jsou závislá na velikosti písmen; nejlepší je použít kombinaci
+písmen (velkých a malých), čísel a ostatních znaků.</para>
     </note>
   </section>
 
   <section xml:id="enterUser">
     <info>
-      <title xml:id="enterUser-ti3">Enter a user</title>
+      <title xml:id="enterUser-ti3">Zadejte uživatele</title>
     </info>
 
     <para>Add a user here. A user has fewer rights than the superuser (root), but
@@ -72,52 +72,53 @@ users icon.</para>
       </listitem>
 
       <listitem>
-        <para><guilabel>Real Name</guilabel>: Insert the users real name into this text
-box.</para>
+        <para><guilabel>Skutečné jméno</guilabel>: Vložte uživatelům do tohoto textového
+pole skutečné jméno.</para>
       </listitem>
 
       <listitem>
-        <para><guilabel>Login Name</guilabel>: Here you enter the user login name or let
-drakx use a version of the users real name. <emphasis>The login name is case
-sensitive.</emphasis></para>
+        <para><guilabel>Přihlašovací jméno</guilabel>: Zde můžete zadat uživatelské
+přihlašovací jméno, nebo nechat instalační program pokusit se použít
+skutečné jméno uživatelů. <emphasis>Přihlašovací jméno je citlivé na
+velikost písmen.</emphasis></para>
       </listitem>
 
       <listitem>
-        <para><guilabel>Password</guilabel>: In this text box you should type in the user
-password. There is a shield at the end of the text box that indicates the
-strength of the password. (See also <xref linkend="givePassword"></xref>)</para>
+        <para><guilabel>Heslo</guilabel>: V tomto textovém poli je třeba zadat uživatelské
+heslo. K dispozici je nápověda na konci textového pole, které udává sílu
+hesla. (viz také <xref linkend="givePassword"></xref>)</para>
       </listitem>
 
       <listitem>
-        <para><guilabel>Password (again)</guilabel>: Retype the user password into this
-text box and drakx will check you have the same password in each of the user
-password text boxes.</para>
+        <para><guilabel>Heslo (znovu)</guilabel>: Znovu zadejte do tohoto textového pole
+heslo uživatele a drakx zkontroluje, zda máte stejné heslo v každém z
+textových polí pro uživatelské heslo.</para>
       </listitem>
     </itemizedlist>
 
    <note>
-      <para>Any user you add while installing Mageia, will have a world readable (but
-write protected) home directory.</para>
+      <para>Každý uživatel, kterého přidáte během instalace Mageia bude mít pro svět
+čitelný (ale chráněný proti zápisu) domovský adresář.</para>
 
       <para>However, while using your new install, any user you add in <emphasis>MCC -
 System - Manage users on system</emphasis> will have a home directory that
 is both read and write protected.</para>
 
-      <para>If you don't want a world readable home directory for anyone, it is advised
-to only add a temporary user now and to add the real one(s) after reboot.</para>
+      <para>Pokud nechcete čitelný domovský adresář pro každého, je doporučeno přidat
+nyní pouze dočasné uživatele a přidat ty pravé až po restartu.</para>
 
       <para>If you prefer world readable home directories, you might want to add all
 extra needed users in the <emphasis>Configuration - Summary</emphasis> step
 during the install. Choose <emphasis>User management</emphasis>.</para>
 
-      <para>The access permissions can also be changed after the install.</para>
+      <para>Přístupová oprávnění lze změnit také po instalaci.</para>
    </note>
 
   </section>
 
   <section xml:id="addUserAdvanced">
     <info>
-      <title xml:id="addUserAdvanced-ti3">Advanced User Management</title>
+      <title xml:id="addUserAdvanced-ti3">Rozšířená správa uživatelů</title>
     </info>
 
     <para>If the <guibutton>advanced</guibutton> button is clicked you are offered a
diff --git a/docs/installer/cs/ask_mntpoint_s.xml b/docs/installer/cs/ask_mntpoint_s.xml
index 9f6c4442..fe5e800e 100644
--- a/docs/installer/cs/ask_mntpoint_s.xml
+++ b/docs/installer/cs/ask_mntpoint_s.xml
@@ -8,7 +8,7 @@
  xml:id="ask_mntpoint_s" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="ask_mntpoint_s-ti1">Choose the mount points</title>
+    <title xml:id="ask_mntpoint_s-ti1">Zvolte si přípojné body</title>
   </info>
 
   
@@ -37,24 +37,24 @@
 align="center" format="PNG" xml:id="chooseMountPoints-im1"></imagedata>
 </imageobject></mediaobject>
 
-  <para>Here you see the Linux partitions that have been found on your computer. If
-you don't agree with the <application>DrakX</application> suggestions, you
-can change the mount points.</para>
+  <para>Zde vidíte Linuxové oddíly, které byly nalezeny na vašem počítači. Pokud
+nesouhlasíte s návrhem <application>DrakX</application>, můžete přípojné
+body změnit.</para>
 
   <note>
-    <para>If you change anything, make sure you still have a <literal>/</literal>
-(root) partition.</para>
+    <para>Máte-li cokoliv ke změně, ujistěte se, že máte stále <literal>/</literal>
+kořenový oddíl (root).</para>
   </note>
 
   <itemizedlist>
     <listitem>
-      <para>Every partition is shown as follows: "Device" ("Capacity", "Mount point",
-"Type").</para>
+      <para>Každý oddíl je zobrazen takto: "Zařízení" ("Kapacita", "Přípojný bod",
+"Typ").</para>
     </listitem>
 
     <listitem>
-      <para>"Device", is made up of: "hard drive", ["hard drive number"(letter)],
-"partition number" (for example, "sda5").</para>
+      <para>"Zařízení", se skládá z "pevného disku", ["číslo disku" (písmeno)], "číslo
+oddílu" (například "sda5").</para>
     </listitem>
 
     
diff --git a/docs/installer/cs/chooseDesktop.xml b/docs/installer/cs/chooseDesktop.xml
index 83c499a2..fe5e403a 100644
--- a/docs/installer/cs/chooseDesktop.xml
+++ b/docs/installer/cs/chooseDesktop.xml
@@ -3,14 +3,14 @@
 
     <!--2012-12-26 marja - exported this section from choosePackages.xml to start a new page-->
 <info>
-      <title xml:id="chooseDesktop-ti1">Desktop Selection</title>
+      <title xml:id="chooseDesktop-ti1">Výběr pracovního prostředí</title>
     </info>
 
  
 
 
-    <para>Depending on your selection here, you may be offered further screens to fine
-tune your choice.</para>
+    <para>V závislosti na vašem výběru zde, vám můžou být nabídnuty další obrazovky
+pro jemné doladění vaší volby.</para>
 
     <para>After the selection step(s), you will see a slide show during package
 installation. The slide show can be disabled by pressing the
diff --git a/docs/installer/cs/choosePackageGroups.xml b/docs/installer/cs/choosePackageGroups.xml
index fae62201..3e584bac 100644
--- a/docs/installer/cs/choosePackageGroups.xml
+++ b/docs/installer/cs/choosePackageGroups.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="choosePackageGroups">
 
     <info>
-      <title xml:id="choosePackageGroups-ti1">Package Group Selection</title>
+      <title xml:id="choosePackageGroups-ti1">Výběr skupiny balíčků</title>
     </info>
 
     
@@ -18,7 +18,7 @@ become visible as the mouse is hovered over them.</para>
 
     <itemizedlist>
       <listitem>
-        <para>Workstation.</para>
+        <para>Pracovní stanice.</para>
       </listitem>
 
       <listitem>
@@ -26,12 +26,12 @@ become visible as the mouse is hovered over them.</para>
       </listitem>
 
       <listitem>
-        <para>Graphical Environment.</para>
+        <para>Grafické prostředí.</para>
       </listitem>
 
       <listitem>
-        <para>Individual Package Selection: You can use this option to manually add or
-remove packages.</para>
+        <para>Individuální výběr balíčků: Tuto možnost můžete použít pro ruční přidání
+nebo odebrání balíčků.</para>
       </listitem>
     </itemizedlist>
     <para>Read <xref linkend="minimal-install"></xref> for instructions on how to do a
diff --git a/docs/installer/cs/choosePackagesTree.xml b/docs/installer/cs/choosePackagesTree.xml
index 8249b932..d965dead 100644
--- a/docs/installer/cs/choosePackagesTree.xml
+++ b/docs/installer/cs/choosePackagesTree.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="choosePackagesTree">
 
     <info>
-      <title xml:id="choosePackagesTree-ti1">Choose Individual Packages</title>
+      <title xml:id="choosePackagesTree-ti1">Výběr jednotlivých balíčků</title>
     </info>
 
     
@@ -11,8 +11,8 @@
 <imageobject> <imagedata fileref="dx2-choosePackagesTree.png" align="center"
 format="PNG" ></imagedata> </imageobject></mediaobject>
 
-    <para>Here you can add or remove any extra packages to customise your
-installation.</para>
+    <para>Zde můžete přidávat nebo odebírat všechny doplňkové balíčky pro přizpůsobení
+instalace.</para>
 
     <para>After having made your choice, you can click on the <guibutton>floppy
 icon</guibutton> at the bottom of the page to save your choice of packages
diff --git a/docs/installer/cs/configureServices.xml b/docs/installer/cs/configureServices.xml
index 63f7dab2..feab1360 100644
--- a/docs/installer/cs/configureServices.xml
+++ b/docs/installer/cs/configureServices.xml
@@ -9,7 +9,7 @@
 
 
     <info>
-      <title xml:id="configureServices-ti1">Configure your Services</title>
+      <title xml:id="configureServices-ti1">Nastavení služeb</title>
     </info>
 
     
@@ -24,8 +24,7 @@ align="center" format="PNG" xml:id="configureServices-im1"></imagedata>
 </imageobject></mediaobject>
 
 
-    <para revision="1" xml:id="configureServices-pa1">Here you can set which services should (not) start when you boot your
-system.</para>
+    <para revision="1" xml:id="configureServices-pa1">Zde si můžete nastavit, jaké služby (ne)spuštět při zavádění systému.</para>
 
     <para revision="1" xml:id="configureServices-pa2">There are four groups, click on the triangle before a group to expand it and
 see all services in it.</para>
diff --git a/docs/installer/cs/configureTimezoneUTC.xml b/docs/installer/cs/configureTimezoneUTC.xml
index 04f59b71..4496c555 100644
--- a/docs/installer/cs/configureTimezoneUTC.xml
+++ b/docs/installer/cs/configureTimezoneUTC.xml
@@ -9,7 +9,7 @@
 
 
     <info>
-      <title xml:id="configureTimezoneUTC-ti6">Configure your Timezone</title>
+      <title xml:id="configureTimezoneUTC-ti6">Nastavení časového pásma</title>
     </info>
 
     
@@ -23,15 +23,15 @@ align="center" format="PNG" xml:id="configureTimezoneUTC-im1"></imagedata>
 </imageobject></mediaobject>
 
 
-    <para revision="1" xml:id="configureTimezoneUTC-pa1">Choose your time zone by choosing your country or a city close to you in the
-same time zone.</para>
+    <para revision="1" xml:id="configureTimezoneUTC-pa1">Vyberte si časové pásmo výběrem vaší zememě nebo nejbližší město ve stejném
+časovém pásmu.</para>
 
-    <para revision="1" xml:id="configureTimezoneUTC-pa2">In next screen you can choose to set your hardware clock to local time or to
-GMT, also known as UTC.</para>
+    <para revision="1" xml:id="configureTimezoneUTC-pa2">V dalším okně si můžete vybrat nastavení hardwarových hodin na místní čas a
+GMT, také známý jako UTC.</para>
 
     <note>
-      <para revision="1" xml:id="configureTimezoneUTC-pa3">If you have more than one operating system on your computer, make sure they
-are all set to local time, or all to UTC/GMT.</para>
+      <para revision="1" xml:id="configureTimezoneUTC-pa3">Pokud máte na vašem počítači více než jeden operační systém, ujistěte se, že
+jsou všechny nastaveny na místní čas, nebo všichny na UTC/GMT.</para>
     </note>
   </section>
 
diff --git a/docs/installer/cs/configureX_card_list.xml b/docs/installer/cs/configureX_card_list.xml
index 7c3b7a5d..d1a481d3 100644
--- a/docs/installer/cs/configureX_card_list.xml
+++ b/docs/installer/cs/configureX_card_list.xml
@@ -13,7 +13,7 @@
 <!-- tproof  -->
 <!-- lproof  -->
 <!-- Done corrections accordind to tmb remarks. Papoteur  -->
-<title xml:id="configureX_card_list-ti1">Choose an X Server (Configure your Graphic Card)</title>
+<title xml:id="configureX_card_list-ti1">Výběr X Serveru (Konfigurace vaší grafické karty)</title>
   </info>
 
   <mediaobject>
@@ -21,39 +21,39 @@
 xml:id="configureX_card_list-im1" fileref="dx2-configureX_card_list.png"
 format="PNG"/> </imageobject></mediaobject>
 
-  <para>DrakX has a very comprehensive database of video cards and will usually
-correctly identify your video device.</para>
+  <para>DrakX má velmi rozsáhlou databázi grafických karet a obvykle video zařízení
+identifikuje správně.</para>
 
-  <para>If the installer has not correctly detected your graphic card and you know
-which one you have, you can select it from the tree by: <itemizedlist>
+  <para>Pokud není vaše grafická karta rozpoznána instalačním programem správně a
+víte, jakou kartu máte, můžete ji vybrat ze stromu: <itemizedlist>
       <listitem>
-        <para>vendor</para>
+        <para>dodavatel</para>
       </listitem>
 
       <listitem>
-        <para>then the name of your card</para>
+        <para>pak název vaší karty</para>
       </listitem>
 
       <listitem>
-        <para>and the type of card</para>
+        <para>a typ vaší karty</para>
       </listitem>
     </itemizedlist></para>
 
-  <para>If you cannot find your card in the vendor lists (because it's not yet in
-the database or it's an older card) you may find a suitable driver in the
-Xorg category</para>
+  <para>Pokud nemůžete najít svou kartu v seznamech dodavatelů (protože ještě není v
+databázi, nebo je to starší karta) můžete najít vhodný ovladač v kategorii
+Xorg</para>
 
-  <para>The Xorg listing provides more than 40 generic and open source video card
-drivers. If you still can't find a named driver for your card there is the
-option of using the vesa driver which provides basic capabilities.</para>
+  <para>Seznam Xorg poskytuje více než 40 obecných a open source ovladačů grafických
+karet. Pokud stále nemůžete najít název ovladače pro kartu, existuje možnost
+použití VESA ovladač, který poskytuje základní možnosti.</para>
 
-  <para>Be aware that if you select an incompatible driver you may only have access
-to the Commandline Interface.</para>
+  <para>Uvědomte si, že pokud vyberete nekompatibilní ovladač, můžete mít přístup
+pouze k rozhhraní příkazové řádky.</para>
 
-  <para>Some video card manufacturers provide proprietary drivers for Linux which
-may only be available in the Nonfree repository and in some cases only from
-the card manufacturers' websites.</para>
+  <para>Někteří výrobci grafických karet poskytují proprietární ovladače pro Linux,
+které mohou být k dispozici v nonfree úložišti a v některých případech jen
+pouze z webových stránek výrobce karety.</para>
 
-  <para>The Nonfree repository needs to be explicitly enabled to access them.  If
-you didn't select it previously, you should do this after your first reboot.</para>
+  <para>Přístup k Nonfree úložišti musí být výslovně povolen. Pokud tomu tak není,
+nejdříve jej povolte, toto byste měli udělat po prvním restartu.</para>
 </section>
\ No newline at end of file
diff --git a/docs/installer/cs/configureX_chooser.xml b/docs/installer/cs/configureX_chooser.xml
index 3184896f..d5398b83 100644
--- a/docs/installer/cs/configureX_chooser.xml
+++ b/docs/installer/cs/configureX_chooser.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="configureX_chooser" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="configureX_chooser-ti1">Graphic Card and Monitor Configuration</title>
+    <title xml:id="configureX_chooser-ti1">Nastavení grafické karty a monitoru</title>
   </info>
 
   
@@ -36,13 +36,13 @@ list. Choose <guilabel>Custom</guilabel> if you prefer to manually set the
 horizontal and vertical refresh rates of your monitor.</para>
 
       <warning>
-        <para revision="1" xml:id="configureX_chooser-pa3a">Incorrect refresh rates may damage your monitor</para>
+        <para revision="1" xml:id="configureX_chooser-pa3a">Nesprávná obnovovací frekvence může poškodit váš monitor</para>
       </warning>
     </listitem>
 
     <listitem>
-      <para revision="1" xml:id="configureX_chooser-pa4"><emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired
-resolution and color depth of your monitor here.</para>
+      <para revision="1" xml:id="configureX_chooser-pa4"><emphasis><guibutton>Rozlišení</guibutton></emphasis>: Zde nastavte
+požadované rozlišení a barevnou hloubku monitoru.</para>
     </listitem>
 
     <listitem>
@@ -57,8 +57,8 @@ available</emphasis></para>
     </listitem>
 
     <listitem>
-      <para revision="1" xml:id="configureX_chooser-pa6"><emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to
-enable or disable various options.</para>
+      <para revision="1" xml:id="configureX_chooser-pa6"><emphasis><guibutton>Možnosti</guibutton></emphasis>: Zde si můžete vybrat
+zda povolit nebo zakázat různé další možnosti.</para>
     </listitem>
   </itemizedlist>
 </section>
diff --git a/docs/installer/cs/configureX_monitor.xml b/docs/installer/cs/configureX_monitor.xml
index 9cbb7c4f..e996c9d7 100644
--- a/docs/installer/cs/configureX_monitor.xml
+++ b/docs/installer/cs/configureX_monitor.xml
@@ -19,7 +19,7 @@
 <!-- Further text JohnR  2012-08-30 -->
 <!-- tproof -->
 <!-- lproof -->
-<title xml:id="configureX_monitor-ti1">Choosing your Monitor</title>
+<title xml:id="configureX_monitor-ti1">Výběr monitoru</title>
   </info>
 
   <para revision="1" xml:id="configureX_monitor-pa1">DrakX has a very comprehensive database of monitors and will usually
@@ -37,7 +37,7 @@ documentation</para>
 format="PNG" revision="1" xml:id="configureX_monitor-im1"/> </imageobject></mediaobject>
 
   <para revision="1"
-  xml:id="configureX_monitor-pa2"><emphasis>Custom</emphasis></para>
+  xml:id="configureX_monitor-pa2"><emphasis>Vlastní</emphasis></para>
 
   <para revision="1" xml:id="configureX_monitor-pa3">This option allows you to set two critical parameters, the vertical refresh
 rate and the horizontal sync rate. Vertical refresh determines how often the
@@ -51,8 +51,7 @@ consult your monitor documentation.</para>
 
   <para revision="1" xml:id="configureX_monitor-pa5"><emphasis>Plug 'n Play</emphasis></para>
 
-  <para revision="1" xml:id="configureX_monitor-pa6">This is the default option and tries to determine the monitor type from the
-monitor database.</para>
+  <para revision="1" xml:id="configureX_monitor-pa6">Toto je výchozí volba a snaží se určit typ monitoru z databáze monitorů.</para>
 
   <para revision="1"
   xml:id="configureX_monitor-pa7"><emphasis>Vendor</emphasis></para>
@@ -60,7 +59,7 @@ monitor database.</para>
   <para revision="1" xml:id="configureX_monitor-pa8">If the installer has not correctly detected your monitor and you know which
 one you have, you can select it from the tree by selecting: <itemizedlist>
       <listitem>
-        <para>vendor</para>
+        <para>dodavatel</para>
       </listitem>
 
       <listitem>
diff --git a/docs/installer/cs/diskdrake.xml b/docs/installer/cs/diskdrake.xml
index c849f4be..768d415e 100644
--- a/docs/installer/cs/diskdrake.xml
+++ b/docs/installer/cs/diskdrake.xml
@@ -24,7 +24,7 @@
       Also added some text. -->
 <!--marja 20120418 moved section end tag down to where it belongs-->
 <!--marja 20120418 added para 6a-->
-<title xml:id="diskdrake-ti1">Custom disk partitioning with DiskDrake</title>
+<title xml:id="diskdrake-ti1">Vlastní rozdělení disku pomocí DiskDrake</title>
   </info>
 
   
diff --git a/docs/installer/cs/doPartitionDisks.xml b/docs/installer/cs/doPartitionDisks.xml
index b2d5d437..5944f0a6 100644
--- a/docs/installer/cs/doPartitionDisks.xml
+++ b/docs/installer/cs/doPartitionDisks.xml
@@ -32,7 +32,7 @@
 <!-- marja 2013-04-05 changed warning to text suggested by Dave Hodgings in bug 9594 -->
 <!-- marja 2013-04-05 adjusted last line of warning as suggested by obgr_seneca -->
 <!-- lebarhon 2013-04-11 adjusted last line of warning as suggested by Dave Hodgins/Marja-->
-<title xml:id="doPartitionDisks-ti1">Partitioning</title>
+<title xml:id="doPartitionDisks-ti1">Rozdělení disku</title>
   </info>
 
   <para revision="1" xml:id="doPartitionDisks-pa1">In this screen you can see the content of your hard drive(s) and see the
@@ -92,7 +92,7 @@ this option.</para>
       </listitem>
     </itemizedlist> <itemizedlist>
       <listitem>
-        <para revision="1" xml:id="doPartitionDisks-pa16">Custom</para>
+        <para revision="1" xml:id="doPartitionDisks-pa16">Vlastní</para>
 
         <para revision="1" xml:id="doPartitionDisks-pa17">This gives you complete control over the placing of the installation on your
 hard drive(s).</para>
diff --git a/docs/installer/cs/exitInstall.xml b/docs/installer/cs/exitInstall.xml
index 52c4af71..f2a1703f 100644
--- a/docs/installer/cs/exitInstall.xml
+++ b/docs/installer/cs/exitInstall.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="exitInstall" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="exitInstall-ti1">Congratulations</title>
+    <title xml:id="exitInstall-ti1">Gratulujeme</title>
   </info>
 
   
diff --git a/docs/installer/cs/installUpdates.xml b/docs/installer/cs/installUpdates.xml
index 33cea1f1..a8207932 100644
--- a/docs/installer/cs/installUpdates.xml
+++ b/docs/installer/cs/installUpdates.xml
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='utf-8'?>
 
-<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="installUpdates"><info><title xml:id="installUpdates-ti1">Updates</title></info>
+<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="installUpdates"><info><title xml:id="installUpdates-ti1">Aktualizace</title></info>
 
 
 
diff --git a/docs/installer/cs/installer.xml b/docs/installer/cs/installer.xml
index 46b72203..3b665d39 100644
--- a/docs/installer/cs/installer.xml
+++ b/docs/installer/cs/installer.xml
@@ -1,5 +1,4 @@
-<?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="installer">
-
+<?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns="http://docbook.org/ns/docbook" xml:id="installer" version="5.0" xml:lang="cs">
   
 
   
@@ -21,12 +20,12 @@
 <!-- JohnR - apparent corruption is caused by the positioning of this comment block 
        - corrected Lebarhon : I put [] where it seems having mistakes  -->
 <!-- barjac 18/04/2012 Commented out para relating to peripherals, as it's apparently wrong -->
-<title xml:id="installer-ti1">DrakX, the Mageia Installer</title>
+<title xml:id="installer-ti1">DrakX, Mageia instalátor</title>
   </info>
 
-  <para>Whether you are new to GNU-Linux or an experienced user, the Mageia
-Installer is designed to help make your installation or upgrade as easy as
-possible.</para>
+  <para>Ať už jste v GNU-Linux začátečník nebo zkušený uživatel, Mageia Instalátor
+je navržen tak, aby instalace nebo aktualizace byla tak jednoduchá, jak jen
+je to možné.</para>
 
   
 
@@ -38,20 +37,131 @@ If you have peripherals like printers or scanners, it is [best] to
 start the installer, which will normally be all that you will need.</para>
 
   <figure xml:id="dx-welcome">
-<info>
+    <info>
       <title xml:id="installer-ti2">Installation Welcome Screen</title>
-    </info> <mediaobject>
-<imageobject> <imagedata revision="1" fileref="../dx-welcome.png"
-align="center" format="PNG" xml:id="BId-drakx-intro-im1"> </imagedata>
-</imageobject></mediaobject></figure>
+    </info>
+
+    <para>Zde je výchozí uvítací obrazovka při použití Mageia DVD:</para>
+
+<mediaobject>
+<imageobject> <imagedata xml:id="BId-drakx-intro-im1" revision="1"
+align="center" format="PNG" fileref="../dx-welcome.png"/> </imageobject></mediaobject></figure>
+
+  <para>From this first screen, it is possible to set some personal preferences:</para>
+
+  <itemizedlist>
+    <listitem>
+      <para>The language (for the installation only, may be different that the chosen
+language for the system) by pressing the key F2</para>
+
+      <para/>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcome-lang.png"/> </imageobject></mediaobject>
+
+      <para>Use the arrow keys to select the language and press the key Enter.</para>
+
+      <para>Here is for example, the French welcome screen when using a Live
+DVD/CD. Note that the Live DVD/CD menu does not propose: <guilabel>Rescue
+System</guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware
+Detection Tool</guilabel>.</para>
+
+      <para/>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcome4fr.png"/> </imageobject></mediaobject>
+
+      <para/>
+    </listitem>
+
+    <listitem>
+      <para>Change the screen resolution by pressing the F3 key.</para>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcome5def.png"/> </imageobject></mediaobject>
+    </listitem>
+
+    <listitem>
+      <para>Add some kernel options by pressing the F6 key.</para>
+
+      <para>If the installation fails, then it may be necessary to try again using one
+of the extra options. The menu called by F6 displays a new line called
+<guilabel>Boot options</guilabel> and propose four entries:</para>
+
+      <para>- Default, it doesn't alter anything in the default options.</para>
+
+      <para>- Safe Settings, priority is given to the safer options to the detriment of
+performances.</para>
+
+      <para>- No ACPI (Advanced Configuration and Power Interface), power management
+isn't taken into account.</para>
+
+      <para>- No Local APIC (Local Advanced Programmable Interrupt Controller), it is
+about CPU interruptions, select this option if you are asked for.</para>
+
+      <para>When you select one of these entries, it modifies the default options
+displayed in the <guilabel>Boot Options</guilabel> line.</para>
+
+      <note>
+        <para>In some Mageia releases, it may happen that the entries selected with the
+key F6 does not appear in the <guilabel>Boot Options</guilabel> line,
+however, they are really taken into account.</para>
+      </note>
 
-  <para>If there are problems during install, then it may be necessary to use
-special installation options, see <xref
-linkend="installationOptions"></xref>.</para>
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcome6opt.png"/> </imageobject></mediaobject>
+    </listitem>
+
+    <listitem>
+      <para>Add more kernel options by pressing the key F1</para>
+
+      <para>Pressing F1 opens a new window with more available options. Select one with
+the arrow keys and press Enter to have more details or press the Esc key to
+go back to the welcome screen.</para>
+
+      <para/>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcomeHelp1.png"/> </imageobject></mediaobject>
+
+      <para/>
+
+      <para>The detailed view about the option splash. Press Esc or select
+<guilabel>Return to Boot Options</guilabel> to go back to the options
+list. These options can by added by hand in the <guilabel>Boot
+options</guilabel> line.</para>
+
+      <mediaobject>
+<imageobject> <imagedata fileref="dx-welcomeHelp2.png"/> </imageobject></mediaobject>
+
+      <para/>
+
+      <note>
+        <para>The help is translated in the chosen language with the F2 key.</para>
+      </note>
+    </listitem>
+  </itemizedlist>
+
+  <para>Here is the default welcome screen when using a Wired Network-based
+Installation CD (Boot.iso or Boot-Nonfree.iso images):</para>
+
+  <para>It does not allow to change the language, the available options are
+described in the screen. For more information about using a Wired
+Network-based Installation CD, see <link
+ns2:href="https://wiki.mageia.org/en/Boot.iso_install">the Mageia
+Wiki</link></para>
+
+  <warning>
+    <para>The keyboard layout is the American one.</para>
+  </warning>
+
+  <mediaobject>
+<imageobject> <imagedata revision="1" xml:id="installer-im2" align="center"
+format="PNG" fileref="../dx-help.png"/> </imageobject></mediaobject>
 
   <section xml:id="installationSteps">
     <info>
-      <title xml:id="installationSteps-ti1">The installation steps</title>
+      <title xml:id="installationSteps-ti1">Instalační kroky</title>
     </info>
 
     <para>The install process is divided into a number of steps, which can be followed
@@ -77,27 +187,9 @@ rebooting is what you want, go to a text terminal by pressing the three keys
   </section>
 
   <section xml:id="installationOptions">
-    <info>
-      <title xml:id="installationOptions-ti1">Installation options</title>
-    </info>
-
-    <para>If the installation fails then it may be necessary to try again by using one
-of the extra options available by hitting the <guibutton>F1
-(Help)</guibutton> key see <xref linkend="dx-welcome"></xref></para>
-
-    <para>This will open the following text based help.</para>
-
-    <figure xml:id="dx-help">
-<info>
-        <title xml:id="installationOptions-ti2">Installation Help Screen</title>
-      </info> <mediaobject>
-<imageobject> <imagedata revision="1" fileref="../dx-help.png"
-align="center" format="PNG" xml:id="installer-im2"></imagedata>
-</imageobject></mediaobject></figure>
-
     <section xml:id="installationProblems">
       <info>
-        <title xml:id="installationProblems-ti1">Installation Problems and Possible Solutions</title>
+        <title xml:id="installationProblems-ti1">Problémy při instalaci a možné řešení</title>
       </info>
 
       <section xml:id="noX">
@@ -117,14 +209,14 @@ low resolution by typing <code>vgalo</code> at the prompt.</para>
 possible. In this case it is worth trying a text mode installation. To use
 this hit ESC at the first welcome screen and confirm with ENTER. You will be
 presented with a black screen with the word "boot:". Type "text" and hit
-ENTER. Now continue with the installation in text mode.<emphasis></emphasis></para>
+ENTER. Now continue with the installation in text mode.</para>
           </listitem>
         </itemizedlist>
       </section>
 
       <section xml:id="installFreezes">
         <info>
-          <title xml:id="installFreezes-ti1">The Install Freezes</title>
+          <title xml:id="installFreezes-ti1">Instalace zamrzne</title>
         </info>
 
         <para>If the system appeared to freeze during the installation, this may be a
@@ -136,7 +228,7 @@ other options as necessary.</para>
 
       <section xml:id="kernelOptions">
         <info>
-          <title xml:id="kernelOptions-ti1">Kernel Options</title>
+          <title xml:id="kernelOptions-ti1">problém paměti RAM</title>
         </info>
 
         <para>These will rarely be needed, but in some cases the hardware may report the
@@ -144,6 +236,18 @@ available RAM incorrectly. To specify this manually, you can use the
 <code>mem=xxxM</code> parameter, where xxx is the correct amount of
 RAM. e.g. <code>mem=256M</code> would specify 256MB of RAM.</para>
       </section>
+
+      <section xml:id="DynamicPartitions">
+        <info>
+          <title xml:id="DynamicPartitions-ti1">Dynamic partitions</title>
+        </info>
+
+        <para>If you converted your hard disk from "basic" format to "dynamic" format on
+Microsoft Windows, you must know that it is impossible to install Mageia on
+this disc. To go back to a basic disk, see the Microsoft documentation:
+<link
+ns2:href="http://msdn.microsoft.com/en-us/library/cc776315.aspx">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>.</para>
+      </section>
     </section>
   </section>
 </section>
\ No newline at end of file
diff --git a/docs/installer/cs/media_selection.xml b/docs/installer/cs/media_selection.xml
index 7150c884..a2d17a22 100644
--- a/docs/installer/cs/media_selection.xml
+++ b/docs/installer/cs/media_selection.xml
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="media_selection" version="5.0" xml:lang="cs">
   <info>
-    <title xml:id="media_selection-ti1">Media Selection (Nonfree)</title>
+    <title xml:id="media_selection-ti1">Výběr zdrojů (Nonfree)</title>
   </info>
 
   
diff --git a/docs/installer/cs/minimal-install.xml b/docs/installer/cs/minimal-install.xml
index 20739ad2..ee48dc78 100644
--- a/docs/installer/cs/minimal-install.xml
+++ b/docs/installer/cs/minimal-install.xml
@@ -2,7 +2,7 @@
     <!--2012-12-26 marja - exported this section from choosePackages.xml to start a new page-->
 <!--2013-05-05 marja - added screenshot and s/next/related/ -->
 <info>
-      <title xml:id="minimal-install-ti1">Minimal Install</title>
+      <title xml:id="minimal-install-ti1">Minimální instalace</title>
     </info>
 
     
diff --git a/docs/installer/cs/misc-params.xml b/docs/installer/cs/misc-params.xml
index 06943135..c0472ec7 100644
--- a/docs/installer/cs/misc-params.xml
+++ b/docs/installer/cs/misc-params.xml
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns="http://docbook.org/ns/docbook" xml:id="misc-params" version="5.0" xml:lang="cs">
   <info>
-    <title xml:id="misc-params-ti1">Summary of miscellaneous parameters</title>
+    <title xml:id="misc-params-ti1">Souhrn různých parametrů</title>
   </info>
 
   
@@ -51,12 +51,12 @@ settings here and change them if you want after pressing
 
   <section xml:id="misc-params-system">
     <info>
-      <title xml:id="misc-params-system-ti2">System parameters</title>
+      <title xml:id="misc-params-system-ti2">Systémové parametry</title>
     </info>
 
     <itemizedlist>
       <listitem>
-        <para xml:id="misc-params-system-pa2" revision="1"><guilabel>Timezone</guilabel></para>
+        <para xml:id="misc-params-system-pa2" revision="1"><guilabel>Časové pásmo</guilabel></para>
 
         <para xml:id="misc-params-system-pa2a" revision="1">DrakX selected a time zone for you, depending on your preferred
 language. You can change it if needed. See also <xref
@@ -71,7 +71,7 @@ correct the setting. See <xref linkend="selectCountry"/></para>
       </listitem>
 
       <listitem>
-        <para xml:id="misc-params-system-pa4" revision="1"><guilabel>Bootloader</guilabel></para>
+        <para xml:id="misc-params-system-pa4" revision="1"><guilabel>Zavaděč</guilabel></para>
 
         <para revision="2" xml:id="misc-params-system-pa4a">DrakX has made good choices for the bootloader setting.</para>
 
@@ -88,7 +88,7 @@ correct the setting. See <xref linkend="selectCountry"/></para>
       </listitem>
 
       <listitem>
-        <para revision="1" xml:id="misc-params-system-pa6"><guilabel>Services</guilabel>:</para>
+        <para revision="1" xml:id="misc-params-system-pa6"><guilabel>Služby</guilabel>:</para>
 
         <para xml:id="misc-params-system-pa6a" revision="1">System services refer to those small programs which run the background
 (daemons). This tool allows you to enable or disable certain tasks.</para>
@@ -103,26 +103,26 @@ prevent your computer from operating correctly.</para>
 
   <section xml:id="misc-params-hardware">
     <info>
-      <title xml:id="misc-params-hardware-ti3">Hardware parameters</title>
+      <title xml:id="misc-params-hardware-ti3">Hardwarové parametry</title>
     </info>
 
     <itemizedlist>
       <listitem>
-        <para revision="1" xml:id="misc-params-hardware-pa1"><guilabel>Keyboard</guilabel>:</para>
+        <para revision="1" xml:id="misc-params-hardware-pa1"><guilabel>Klávesnice</guilabel>:</para>
 
         <para xml:id="misc-params-hardware-pa1a" revision="1">This is where you setup or change your keyboard layout which will depend on
 your location, language or type of keyboard.</para>
       </listitem>
 
       <listitem>
-        <para revision="1" xml:id="misc-params-hardware-pa2"><guilabel>Mouse</guilabel>:</para>
+        <para revision="1" xml:id="misc-params-hardware-pa2"><guilabel>Myš</guilabel>:</para>
 
         <para revision="1" xml:id="misc-params-hardware-pa2a">Here you can add or configure other pointing devices, tablets, trackballs
 etc.</para>
       </listitem>
 
       <listitem>
-        <para revision="1" xml:id="misc-params-hardware-pa3"><guilabel>Sound card</guilabel>:</para>
+        <para revision="1" xml:id="misc-params-hardware-pa3"><guilabel>Zvuková karta</guilabel>:</para>
 
 	<para revision="1" xml:id="misc-params-hardware-pa3a">The installer uses the default driver, if there is a default one. The option
 to select a different driver is only given when there is more than one
@@ -130,7 +130,7 @@ driver for your card, but none of them is the default one.</para>
       </listitem>
 
       <listitem>
-        <para xml:id="misc-params-hardware-pa4" revision="1"><guilabel>Graphical interface</guilabel>:</para>
+        <para xml:id="misc-params-hardware-pa4" revision="1"><guilabel>Grafické rozhraní</guilabel>:</para>
 
         <para revision="1" xml:id="misc-params-hardware-pa4a">This section allows you to configure your graphic card(s) and displays.</para>
 
@@ -146,12 +146,12 @@ align="center" format="PNG" fileref="dx2-summaryBottom.png" />
 
   <section xml:id="misc-params-network">
     <info>
-      <title xml:id="misc-params-network-ti4">Network and Internet parameters</title>
+      <title xml:id="misc-params-network-ti4">Parametry sítě a Internetu</title>
     </info>
 
     <itemizedlist>
       <listitem>
-        <para revision="1" xml:id="misc-params-network-pa1"><guilabel>Network</guilabel>:</para>
+        <para revision="1" xml:id="misc-params-network-pa1"><guilabel>Síť</guilabel>:</para>
 
         <para xml:id="misc-params-network-pa2" revision="1">You can configure your network here, but for network cards with non-free
 drivers it is better to do that after reboot, in the <application>Mageia
@@ -165,7 +165,7 @@ that interface as well.</para>
       </listitem>
 
       <listitem>
-        <para xml:id="misc-params-network-pa4" revision="1"><guilabel>Proxies</guilabel>:</para>
+        <para xml:id="misc-params-network-pa4" revision="1"><guilabel>Proxy</guilabel>:</para>
 
         <para xml:id="misc-params-network-pa4a" revision="1">A Proxy Server acts as an intermediary between your computer and the wider
 internet.  This section allows you to configure your computer to utilize a
@@ -179,7 +179,7 @@ need to enter here</para>
 
   <section xml:id="misc-params-security">
     <info>
-      <title xml:id="misc-params-security-ti5">Security</title>
+      <title xml:id="misc-params-security-ti5">Bezpečnost</title>
     </info>
 
     <itemizedlist>
diff --git a/docs/installer/cs/securityLevel.xml b/docs/installer/cs/securityLevel.xml
index d09e5f83..0a0974ee 100644
--- a/docs/installer/cs/securityLevel.xml
+++ b/docs/installer/cs/securityLevel.xml
@@ -9,7 +9,7 @@
 
 
     <info>
-      <title xml:id="securityLevel-ti1">Security Level</title>
+      <title xml:id="securityLevel-ti1">Úroveň zabezpečení</title>
     </info>
 
  
diff --git a/docs/installer/cs/selectCountry.xml b/docs/installer/cs/selectCountry.xml
index 209d2bbf..cd3cbfae 100644
--- a/docs/installer/cs/selectCountry.xml
+++ b/docs/installer/cs/selectCountry.xml
@@ -41,7 +41,7 @@ choice.</para>
     <section xml:id="inputMethod">
 
       <info>
-        <title xml:id="inputMethod-ti7">Input method</title>
+        <title xml:id="inputMethod-ti7">Vstupní metoda</title>
       </info>
 
       <para revision="1" xml:id="selectCountry-pa4">In the <guilabel>Other Countries</guilabel> screen you can also select an
diff --git a/docs/installer/cs/selectInstallClass.xml b/docs/installer/cs/selectInstallClass.xml
index 39948a22..90fe938e 100644
--- a/docs/installer/cs/selectInstallClass.xml
+++ b/docs/installer/cs/selectInstallClass.xml
@@ -23,7 +23,7 @@
       "you will" and "don't" to "do not" and a passive to an active tense, marja, 20120409-->
 <!-- barjac 2012-04-10 In the spirit of KISS reverted to my initial basic version -->
 <!-- 2013-05-05 marja, corrected typo in screenshot name, removed  -->
-<title xml:id="selectInstallClass-ti1">Install or Upgrade</title>
+<title xml:id="selectInstallClass-ti1">Instalace nebo Aktualizace</title>
   </info>
 
   <mediaobject>
@@ -32,13 +32,13 @@ format="PNG"></imagedata> </imageobject></mediaobject>
 
   <itemizedlist>
     <listitem>
-      <para>Install</para>
+      <para>Instalovat</para>
 
       <para>Use this option for a fresh <application>Mageia</application> installation.</para>
     </listitem>
 
     <listitem>
-      <para>Upgrade</para>
+      <para>Aktualizace</para>
 
       <para>If you have one or more <application>Mageia</application> installations on
 your system, the installer will allow you to upgrade one of them to the
diff --git a/docs/installer/cs/selectKeyboard.xml b/docs/installer/cs/selectKeyboard.xml
index 78265f09..8e955ea1 100644
--- a/docs/installer/cs/selectKeyboard.xml
+++ b/docs/installer/cs/selectKeyboard.xml
@@ -13,11 +13,11 @@
   <info>
     <!-- Started by marja on 2012 03 31 -->
 <!-- NEEDS TO BE REVIEWED! -->
-<title xml:id="selectKeyboard-ti1">Keyboard</title>
+<title xml:id="selectKeyboard-ti1">Klávesnice</title>
   </info>
 
-  <para revision="1" xml:id="selectKeyboard-pa1">DrakX selects an appropriate keyboard for your language. If no suitable
-keyboard is found it will default to a US keyboard layout.</para>
+  <para revision="1" xml:id="selectKeyboard-pa1">DrakX vybere vhodnou klávesnici pro váš jazyk. Pokud není nalezena žádná
+vhodná klávesnice, bude jako výchozí použito rozložení klávesnice US.</para>
 
   <mediaobject>
 <imageobject> <imagedata align="center" fileref="dx2-selectKeyboard.png" />
@@ -34,9 +34,9 @@ xlink:href="http://en.wikipedia.org/wiki/Keyboard_layout">en.wikipedia.org/wiki/
     </listitem>
 
     <listitem>
-      <para revision="1" xml:id="selectKeyboard-pa3">If your keyboard isn't in the list shown, click on
-<guibutton>More</guibutton> to get a full list, and select your keyboard
-there.</para>
+      <para revision="1" xml:id="selectKeyboard-pa3">Pokud vaše klávesnice není v zobrazeném seznamu, klepněte na
+<guibutton>Více</guibutton> pro získání úplného seznamu a vyberte klávesnici
+tam.</para>
 
       <para revision="1"><warning>
           <para revision="1" xml:id="selectKeyboard-pa5">After choosing a keyboard from the <guibutton>More</guibutton> dialog,
diff --git a/docs/installer/cs/selectLanguage.xml b/docs/installer/cs/selectLanguage.xml
index ba6b386a..30c1c4f7 100644
--- a/docs/installer/cs/selectLanguage.xml
+++ b/docs/installer/cs/selectLanguage.xml
@@ -25,7 +25,7 @@
        code in figure, marja, 20120409 -->
 <!-- barjac 2012-04-11 - removed image figure tag - and once again had to clean
        up mess made of this header by xxe -->
-<title xml:id="selectLanguage-ti1">Please choose a language to use</title>
+<title xml:id="selectLanguage-ti1">Prosím zvolte si jazyk, který chcete používat</title>
   </info>
 
   <para>Select your preferred language, by first expanding the list for your
diff --git a/docs/installer/cs/selectMouse.xml b/docs/installer/cs/selectMouse.xml
index 390b24d8..7ca7b3ad 100644
--- a/docs/installer/cs/selectMouse.xml
+++ b/docs/installer/cs/selectMouse.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" xml:id="selectMouse" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="selectMouse-ti1">Select mouse</title>
+    <title xml:id="selectMouse-ti1">Výběr myši</title>
   </info>
 
   
@@ -20,8 +20,8 @@
 <imageobject> <imagedata fileref="dx2-selectMouse.png" align="center"
 format="PNG" > </imagedata> </imageobject></mediaobject>
 
-  <para revision="2" xml:id="selectMouse-pa1">If you are not happy with how your mouse responds, you can select a
-different one here.</para>
+  <para revision="2" xml:id="selectMouse-pa1">Pokud nejste spokojeni s tím, jak vaše myš reaguje, můžete zde vybrat jiný
+typ.</para>
 
  <para revision="2" xml:id="selectMouse-pa2">Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB
 mice</guilabel> is a good choice.</para>
diff --git a/docs/installer/cs/setupBootloader.xml b/docs/installer/cs/setupBootloader.xml
index 1578b33c..75e70578 100644
--- a/docs/installer/cs/setupBootloader.xml
+++ b/docs/installer/cs/setupBootloader.xml
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="setupBootloader">
   <info>
-    <title xml:id="setupBootloader-ti1">Bootloader main options</title>
+    <title xml:id="setupBootloader-ti1">Základní nastavení zaváděcího programu</title>
   </info>
 
   
diff --git a/docs/installer/cs/setupBootloaderAddEntry.xml b/docs/installer/cs/setupBootloaderAddEntry.xml
index 6fbaef30..a281d2a2 100644
--- a/docs/installer/cs/setupBootloaderAddEntry.xml
+++ b/docs/installer/cs/setupBootloaderAddEntry.xml
@@ -2,7 +2,7 @@
 
 
 
-<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="setupBootloaderAddEntry"><info><title xml:id="setupBootloaderAddEntry-ti1">Add or Modify a Boot Menu Entry</title></info>
+<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="setupBootloaderAddEntry"><info><title xml:id="setupBootloaderAddEntry-ti1">Přidaní nebo změna položky v nabídce zavaděče</title></info>
 
 	
 
diff --git a/docs/installer/cs/setupSCSI.xml b/docs/installer/cs/setupSCSI.xml
index 175dd950..c379b2dd 100644
--- a/docs/installer/cs/setupSCSI.xml
+++ b/docs/installer/cs/setupSCSI.xml
@@ -8,7 +8,7 @@
  xml:id="setupSCSI" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="setupSCSI-ti1">Setup SCSI</title>
+    <title xml:id="setupSCSI-ti1">Nastavení SCSI</title>
   </info>
 
   
@@ -34,12 +34,11 @@
 format="PNG" align="center" xml:id="setupSCSI-im1"></imagedata>
 </imageobject></mediaobject>
 
-  <para revision="3.1" xml:id="setupSCSI-pa1">DrakX usually detects hard disks correctly. With some older SCSI controllers
-it may be unable to determine the correct drivers to use and subsequently
-fail to recognise the drive.</para>
+  <para revision="3.1" xml:id="setupSCSI-pa1">DrakX obvykle zjistí pevné disky správně. U některých starších řadičů SCSI
+může být schopen určit a použít správné ovladače, ale následně nedokáže
+rozpoznat disk.</para>
 
-  <para revision="2" xml:id="setupSCSI-pa2">If this happens, you will need to manually tell Drakx which SCSI drive(s)
-you have.</para>
+  <para revision="2" xml:id="setupSCSI-pa2">Pokud k tomuto dojde, budete muset ručně říci Drakx, jaký disk(y) SCSI máte.</para>
 
-  <para revision="3" xml:id="setupSCSI-pa3">DrakX should then be able to configure the drive(s) correctly.</para>
+  <para revision="3" xml:id="setupSCSI-pa3">DrakX by pak měl být schopen správně nakonfigurovat disk(y).</para>
 </section>
diff --git a/docs/installer/cs/soundConfig.xml b/docs/installer/cs/soundConfig.xml
index ae4a3fc4..e21e99bd 100644
--- a/docs/installer/cs/soundConfig.xml
+++ b/docs/installer/cs/soundConfig.xml
@@ -8,7 +8,7 @@
 	xml:id="soundConfig" version="5.0" xml:lang="cs">
 
   <info>
-    <title xml:id="soundConfig-ti1">Sound Configuration</title>
+    <title xml:id="soundConfig-ti1">Nastavení zvuku</title>
   </info>
 
   
@@ -36,7 +36,7 @@ to solve the problem.
 
   <section xml:id="soundConfig-Advanced">
     <info>
-      <title xml:id="soundConfig-Advanced-ti1">Advanced</title>
+      <title xml:id="soundConfig-Advanced-ti1">Rozšíření</title>
     </info>
 
     <para>Clicking <guibutton>Advanced</guibutton> in this screen, during install, is