diff options
Diffstat (limited to 'perl-install/partition_table_raw.pm')
-rw-r--r-- | perl-install/partition_table_raw.pm | 177 |
1 files changed, 106 insertions, 71 deletions
diff --git a/perl-install/partition_table_raw.pm b/perl-install/partition_table_raw.pm index d85789a50..aae6f843c 100644 --- a/perl-install/partition_table_raw.pm +++ b/perl-install/partition_table_raw.pm @@ -1,101 +1,136 @@ -package partition_table_raw; +package partition_table_raw; # $Id$ use diagnostics; use strict; -use common qw(:common :system); +use common qw(:common :system :file); +use devices; use c; -my @fields = qw(active start_head start_sec start_cyl type end_head end_sec end_cyl start size); -my $format = "C8 I2"; -my $magic = "\x55\xAA"; -my $nb_primary = 4; - -my $offset = $common::SECTORSIZE - length($magic) - $nb_primary * common::psizeof($format); - -1; - - -sub compute_CHS($$) { - my ($hd, $e) = @_; - my @l = qw(cyl head sec); - @$e{map { "start_$_" } @l} = $e->{start} || $e->{type} ? CHS2rawCHS(sector2CHS($hd, $e->{start})) : (0,0,0); - @$e{map { "end_$_" } @l} = $e->{start} || $e->{type} ? CHS2rawCHS(sector2CHS($hd, $e->{start} + $e->{size} - 1)) : (0,0,0); - 1; +my @MBR_signatures = ( + [ 'empty', 0, "\0\0\0\0" ], + [ 'grub', 0, "\xEBG", 0x17d, "stage1 \0" ], + [ 'grub', 0, "\xEBH", 0x17e, "stage1 \0" ], + [ 'grub', 0, "\xEBH", 0x18a, "stage1 \0" ], + [ 'lilo', 0x2, "LILO" ], + [ 'lilo', 0x6, "LILO" ], + [ 'osbs', 0x2, "OSBS" ], #- http://www.prz.tu-berlin.de/~wolf/os-bs.html + [ 'pqmagic', 0xef, "PQV" ], + [ 'BootStar', 0x130, "BootStar:" ], + [ 'DocsBoot', 0x148, 'DocsBoot' ], + [ 'system_commander', 0x1ad, "SYSCMNDRSYS" ], + [ 'Be Os', 0x24, 'Boot Manager' ], + [ 'TimO', 0, 'IBM Thinkpad hibernation partition' ], + [ 'dos', 0xa0, "\x25\x03\x4E\x02\xCD\x13" ], + [ 'dos', 0xa0, "\x00\xB4\x08\xCD\x13\x72" ], #- nt2k's + [ 'dos', 0x60, "\xBB\x00\x7C\xB8\x01\x02\x57\xCD\x13\x5F\x73\x0C\x33\xC0\xCD\x13" ], #- nt's + [ 'dos', 0x70, "\x0C\x33\xC0\xCD\x13\x4F\x75\xED\xBE\xA3" ], + [ 'freebsd', 0xC0, "\x00\x30\xE4\xCD\x16\xCD\x19\xBB\x07\x00\xB4" ], + [ 'freebsd', 0x160, "\x6A\x10\x89\xE6\x48\x80\xCC\x40\xCD\x13" ], + [ 'dummy', 0xAC, "\x0E\xB3\x07\x56\xCD\x10\x5E\xEB" ], #- caldera? + [ 'ranish', 0x100, "\x6A\x10\xB4\x42\x8B\xF4\xCD\x13\x8B\xE5\x73" ], + [ 'os2', 0x1c2, "\xA" ], +); + +sub typeOfMBR($) { typeFromMagic(devices::make($_[0]), @MBR_signatures) } +sub typeOfMBR_($) { typeFromMagic($_[0], @MBR_signatures) } + +sub hasExtended { 0 } + +sub cylinder_size($) { + my ($hd) = @_; + $hd->{geom}{sectors} * $hd->{geom}{heads}; } -sub CHS2rawCHS($$$) { - my ($c, $h, $s) = @_; - $c = min($c, 1023); # no way to have a #cylinder >= 1024 - ($c & 0xff, $h, $s | ($c >> 2 & 0xc0)); +#- default method for starting a partition, only head size or twice +#- is allowed for starting a partition after a cylinder boundarie. +sub adjustStart($$) { + my ($hd, $part) = @_; + my $end = $part->{start} + $part->{size}; + + $part->{start} = round_up($part->{start}, + $part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ? + $hd->{geom}{sectors} : cylinder_size($hd)); + $part->{size} = $end - $part->{start}; + $part->{size} > 0 or die "adjustStart get a too small partition to handle correctly"; } - -# returns (cylinder, head, sector) -sub sector2CHS($$) { - my ($hd, $start) = @_; - my ($s, $h); - ($start, $s) = divide($start, $hd->{geom}->{sectors}); - ($start, $h) = divide($start, $hd->{geom}->{heads}); - ($start, $h, $s + 1); +#- adjusting end to match a cylinder boundary, two methods are used and must +#- match at the end, else something is wrong and nothing will be done on +#- partition table. +#- $end2 is computed by removing 2 (or only 1 if only 2 heads on drive) groups +#- of sectors, this is necessary to handle extended partition where logical +#- partition start after 1 (or 2 accepted) groups of sectors (typically 63). +#- $end is floating (is not on cylinder boudary) so we have to choice a good +#- candidate, $end1 or $end2 should always be good except $end1 for small +#- partition size. +sub adjustEnd($$) { + my ($hd, $part) = @_; + my $end = $part->{start} + $part->{size}; + my $end1 = round_down($end, cylinder_size($hd)); + my $end2 = round_up($end - ($hd->{geom}{heads} > 2 ? 2 : 1) * $hd->{geom}{sectors}, cylinder_size($hd)); + $end2 <= $hd->{geom}{cylinders} * cylinder_size($hd) or die "adjustEnd go beyond end of device geometry ($end2 > $hd->{totalsectors})"; + $part->{size} = ($end1 - $part->{start} > cylinder_size($hd) ? $end1 : $end2) - $part->{start}; + $part->{size} > 0 or die "adjustEnd get a too small partition to handle correctly"; } sub get_geometry($) { my ($dev) = @_; my $g = ""; - + local *F; sysopen F, $dev, 0 or return; ioctl(F, c::HDIO_GETGEO(), $g) or return; - my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g; + $geom{totalcylinders} = $geom{cylinders}; + + #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB) + if (my $total = c::total_sectors(fileno F)) { + $geom{cylinders} = int $total / $geom{heads} / $geom{sectors}; + } { geom => \%geom, totalsectors => $geom{heads} * $geom{sectors} * $geom{cylinders} }; } -sub openit($$;$) { sysopen $_[1], $_[0]->{file}, $_[2] || 0; } - -# cause kernel to re-read partition table -sub kernel_read($) { +#- works for both hard drives and partitions ;p +sub description { my ($hd) = @_; - local *F; openit($hd, \*F) or return 0; - ioctl(F, c::BLKRRPART(), 0) or die "kernel_read failed: need to reboot"; -} - -sub read($$) { - my ($hd, $sector) = @_; - my $tmp; - - local *F; openit($hd, \*F) or return; - c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed"; + my $win = $hd->{device_windobe}; - my @pt = map { - sysread F, $tmp, psizeof($format) or return "error while reading partition table in sector $sector"; - my %h; @h{@fields} = unpack $format, $tmp; - \%h; - } (1..$nb_primary); + sprintf "%s%s (%d%s%s)", + $hd->{device}, + $win && " [$win:]", + ($hd->{totalsectors} || $hd->{size}) >> 11, _("MB"), + $hd->{info} && ", $hd->{info}"; +} - # check magic number - sysread F, $tmp, length $magic or die "error reading magic number"; - $tmp eq $magic or die "bad magic number"; +sub openit($$;$) { sysopen $_[1], $_[0]{file}, $_[2] || 0; } - [ @pt ]; +# cause kernel to re-read partition table +sub kernel_read($) { + my ($hd) = @_; + sync(); + local *F; openit($hd, *F) or return 0; + sync(); sleep(1); + $hd->{rebootNeeded} = !ioctl(F, c::BLKRRPART(), 0); + sync(); + close F; + sync(); sleep(1); } -# write the partition table (and extended ones) -# for each entry, it uses fields: start, size, type, active -sub write($$$) { - my ($hd, $sector, $pt) = @_; +sub zero_MBR { + my ($hd) = @_; + #- force the standard partition type for the architecture + my $type = arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : arch() eq "ppc" ? "mac" : "dos"; + require("partition_table_$type.pm"); + bless $hd, "partition_table_$type"; + $hd->{primary} = $hd->clear_raw(); + delete $hd->{extended}; +} - local *F; openit($hd, \*F, 2) or die "error opening device $hd->{device} for writing"; - c::lseek_sector(fileno(F), $sector, $offset) or return 0; +sub zero_MBR_and_dirty { + my ($hd) = @_; + zero_MBR($hd); + $hd->{isDirty} = $hd->{needKernelReread} = 1; - @$pt == $nb_primary or die "partition table does not have $nb_primary entries"; - foreach (@$pt) { - compute_CHS($hd, $_); - local $_->{start} = $_->{local_start} || 0; - $_->{active} ||= 0; $_->{type} ||= 0; $_->{size} ||= 0; # for no warning - syswrite F, pack($format, @$_{@fields}) or return 0; - } - syswrite F, $magic or return 0; - 1; } -sub zero_MBR($) { &write($_[0], 0, [ {} x $nb_primary ]); } + +1; |