diff options
Diffstat (limited to 'perl-install/partition_table/raw.pm')
| -rw-r--r-- | perl-install/partition_table/raw.pm | 250 |
1 files changed, 183 insertions, 67 deletions
diff --git a/perl-install/partition_table/raw.pm b/perl-install/partition_table/raw.pm index 37208d230..453a19c6c 100644 --- a/perl-install/partition_table/raw.pm +++ b/perl-install/partition_table/raw.pm @@ -1,4 +1,4 @@ -package partition_table::raw; # $Id$ +package partition_table::raw; use diagnostics; use strict; @@ -6,20 +6,36 @@ use strict; use common; use devices; use detect_devices; +use fs::type; use log; use c; my @MBR_signatures = ( -if_(arch() =~ /ppc/, - map { [ 'yaboot', 0, "PM", 0x200 * $_ + 0x10, "bootstrap\0" ] } 0 .. 61 -), [ 'empty', 0, "\0\0\0\0" ], [ 'grub', 0, "\xEBG", 0x17d, "stage1 \0" ], [ 'grub', 0, "\xEBH", 0x17e, "stage1 \0" ], [ 'grub', 0, "\xEBH", 0x18a, "stage1 \0" ], - [ 'grub', 0, "\xEBH", 0x181, "GRUB \0" ], + sub { my ($F) = @_; + #- standard grub has no good magic (Mageia's grub is patched to have "GRUB" at offset 6) + #- so scanning a range of possible places where grub can have its string + #- 0x176 found on Conectiva 10 + my ($min, $max, $magic) = (0x176, 0x181, "GRUB \0"); + my $tmp; + sysseek($F, 0, 0) && sysread($F, $tmp, $max + length($magic)) or return; + substr($tmp, 0, 2) eq "\xEBH" or return; + index($tmp, $magic, $min) >= 0 && "grub"; + }, + sub { my ($F) = @_; + #- similar to grub-legacy, grub2 doesn't seem to have good magic + #- so scanning a range of possible places where grub can have its string + my ($min, $max, $magic) = (0x176, 0x188, "GRUB"); + my $tmp; + sysseek($F, 0, 0) && sysread($F, $tmp, $max + length($magic)) or return; + index($tmp, $magic, $min) >= 0 && "grub2"; + }, [ 'lilo', 0x2, "LILO" ], [ 'lilo', 0x6, "LILO" ], + [ 'lilo', 0x6 + 0x40, "LILO" ], #- when relocated in lilo's bsect_update(), variable "space" on paragraph boundary gives 0x40 [ 'grub', 0x6, "GRUB" ], [ 'osbs', 0x2, "OSBS" ], #- http://www.prz.tu-berlin.de/~wolf/os-bs.html [ 'pqmagic', 0xef, "PQV" ], @@ -27,6 +43,7 @@ if_(arch() =~ /ppc/, [ 'DocsBoot', 0x148, 'DocsBoot' ], [ 'system_commander', 0x1ad, "SYSCMNDRSYS" ], [ 'Be Os', 0x24, 'Boot Manager' ], + [ 'os2', 0, "\xFA\xB8\x30\x00", 0xfA, "OS/2" ], [ 'TimO', 0, 'IBM Thinkpad hibernation partition' ], [ 'dos', 0xa0, "\x25\x03\x4E\x02\xCD\x13" ], [ 'dos', 0xa0, "\x00\xB4\x08\xCD\x13\x72" ], #- nt2k's @@ -36,14 +53,16 @@ if_(arch() =~ /ppc/, [ 'freebsd', 0x160, "\x6A\x10\x89\xE6\x48\x80\xCC\x40\xCD\x13" ], [ 'dummy', 0xAC, "\x0E\xB3\x07\x56\xCD\x10\x5E\xEB" ], #- caldera? [ 'ranish', 0x100, "\x6A\x10\xB4\x42\x8B\xF4\xCD\x13\x8B\xE5\x73" ], - [ 'os2', 0x1c2, "\xA" ], + [ 'os2', 0x1c2, "\x0A" ], [ 'Acronis', 0, "\xE8\x12\x01" ], ); sub typeOfMBR($) { typeFromMagic(devices::make($_[0]), @MBR_signatures) } sub typeOfMBR_($) { typeFromMagic($_[0], @MBR_signatures) } +sub use_pt_type { 0 } sub hasExtended { 0 } +sub set_best_geometry_for_the_partition_table {} sub cylinder_size($) { my ($hd) = @_; @@ -54,19 +73,13 @@ sub last_usable_sector { my ($hd) = @_; $hd->{totalsectors}; } +# no limit +sub max_partition_start { 1e99 } +sub max_partition_size { 1e99 } -#- default method for starting a partition, only head size or twice -#- is allowed for starting a partition after a cylinder boundarie. -sub adjustStart($$) { - my ($hd, $part) = @_; - my $end = $part->{start} + $part->{size}; +#- default method for starting a partition +sub adjustStart($$) {} - $part->{start} = round_up($part->{start}, - $part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ? - $hd->{geom}{sectors} : cylinder_size($hd)); - $part->{size} = $end - $part->{start}; - $part->{size} > 0 or die "adjustStart get a too small partition to handle correctly"; -} #- adjusting end to match a cylinder boundary, two methods are used and must #- match at the end, else something is wrong and nothing will be done on #- partition table. @@ -84,109 +97,212 @@ sub adjustEnd($$) { my $end2 = round_up($end - ($hd->{geom}{heads} > 2 ? 2 : 1) * $hd->{geom}{sectors}, cylinder_size($hd)); $end2 <= $hd->{geom}{cylinders} * cylinder_size($hd) or die "adjustEnd go beyond end of device geometry ($end2 > $hd->{totalsectors})"; $part->{size} = ($end1 - $part->{start} > cylinder_size($hd) ? $end1 : $end2) - $part->{start}; - $part->{size} > 0 or die "adjustEnd get a too small partition to handle correctly"; + $part->{size} > 0 or internal_error("adjustEnd get a too small partition to handle correctly"); +} + +sub compute_nb_cylinders { + my ($geom, $totalsectors) = @_; + if ($geom->{heads} && $geom->{sectors}) { + $geom->{cylinders} = int $totalsectors / $geom->{heads} / $geom->{sectors}; + } +} + +sub keep_non_duplicates { + my %l; + $l{$_->[0]}++ foreach @_; + map { @$_ } grep { $l{$_->[0]} == 1 } @_; +} + +sub get_geometries { + my (@hds) = @_; + + @hds = grep { + if ($_->{bus} =~ /dmraid/) { + sysopen(my $F, $_->{file}, 0); + my $total = c::total_sectors(fileno $F); + my %geom; + $geom{heads} = 255; + $geom{sectors} = 63; + $geom{start} = 1; + compute_nb_cylinders(\%geom, $total); + $geom{totalcylinders} = $geom{cylinders}; + log::l("Fake geometry on " . $_->{file} . ": heads=$geom{heads} sectors=$geom{sectors} cylinders=$geom{cylinders} start=$geom{start}"); + add2hash_($_, { totalsectors => $total, geom => \%geom }); + 1; + } elsif (my $h = get_geometry($_->{file})) { + add2hash_($_, $h); + 1; + } else { + log::l("An error occurred while getting the geometry of block device $_->{file}: $!"); + 0; + } + } @hds; + + my %id2hd = keep_non_duplicates(map { + my $F = openit($_) or log::l("failed to open device $_->{device}"); + my $tmp; + if ($F && c::lseek_sector(fileno($F), 0, 0x1b8) && sysread($F, $tmp, 4)) { + [ sprintf('0x%08x', unpack('V', $tmp)), $_ ]; + } else { + (); + } + } @hds); + + + my %id2edd = keep_non_duplicates(map { [ scalar(chomp_(cat_("$_/mbr_signature"))), $_ ] } glob("/sys/firmware/edd/int13_dev*")); + + log::l("id2hd: " . join(' ', map_each { "$::a=>$::b->{device}" } %id2hd)); + log::l("id2edd: " . join(' ', map_each { "$::a=>$::b" } %id2edd)); + + foreach my $id (keys %id2hd) { + my $hd = $id2hd{$id}; + $hd->{volume_id} = $id; + + if (my $edd_dir = $id2edd{$id}) { + $hd->{bios_from_edd} = $1 if $edd_dir =~ /int13_dev(.*)/; + + require partition_table::dos; + my $geom = partition_table::dos::geometry_from_edd($hd, $edd_dir); + $hd->{geom} = $geom if $geom; + } + } + + @hds; } -sub get_geometry($) { +sub get_geometry { my ($dev) = @_; + sysopen(my $F, $dev, 0) or return; + + my $total = c::total_sectors(fileno $F); + my $g = ""; + my %geom; + if (ioctl($F, c::HDIO_GETGEO(), $g)) { + @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g; + log::l("HDIO_GETGEO on $dev succeeded: heads=$geom{heads} sectors=$geom{sectors} cylinders=$geom{cylinders} start=$geom{start}"); + $geom{totalcylinders} = $geom{cylinders}; - local *F; sysopen F, $dev, 0 or return; - ioctl(F, c::HDIO_GETGEO(), $g) or return; - my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g; - $geom{totalcylinders} = $geom{cylinders}; - - my $total; - #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB) - if ($total = c::total_sectors(fileno F)) { - $geom{cylinders} = int $total / $geom{heads} / $geom{sectors}; - } else { - $total = $geom{heads} * $geom{sectors} * $geom{cylinders} + #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB) + if ($total) { + compute_nb_cylinders(\%geom, $total); + } else { + $total = $geom{heads} * $geom{sectors} * $geom{cylinders}; + } } - { geom => \%geom, totalsectors => $total }; + { totalsectors => $total, if_($geom{heads}, geom => \%geom) }; } -sub openit($$;$) { sysopen $_[1], $_[0]{file}, $_[2] || 0 } +sub openit { + my ($hd, $o_mode) = @_; + my $F; sysopen($F, $hd->{file}, $o_mode || 0) && $F; +} -# cause kernel to re-read partition table -sub kernel_read($) { +sub can_add { my ($hd) = @_; - common::sync(); - local *F; openit($hd, *F) or return 0; - common::sync(); sleep(1); - $hd->{rebootNeeded} = !ioctl(F, c::BLKRRPART(), 0); - common::sync(); - close F; - common::sync(); sleep(1); + !$_->{size} && !$_->{pt_type} || isExtended($_) and return 1 foreach @{$hd->{primary}{raw}}; + 0; } sub raw_removed { - my ($hd, $raw) = @_; + my ($_hd, $_raw) = @_; } sub can_raw_add { my ($hd) = @_; - $_->{size} || $_->{type} or return 1 foreach @{$hd->{primary}{raw}}; + $_->{size} || $_->{pt_type} or return 1 foreach @{$hd->{primary}{raw}}; 0; } sub raw_add { - my ($hd, $raw, $part) = @_; + my ($_hd, $raw, $part) = @_; foreach (@$raw) { - $_->{size} || $_->{type} and next; + $_->{size} || $_->{pt_type} and next; $_ = $part; return; } die "raw_add: partition table already full"; } -sub zero_MBR { +sub zero_MBR { &partition_table::initialize } #- deprecated + +#- deprecated +sub zero_MBR_and_dirty { my ($hd) = @_; - #- force the standard partition type for the architecture - my $type = arch() =~ /ia64/ ? 'gpt' : arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : arch() eq "ppc" ? "mac" : "dos"; - #- override standard mac type on PPC for IBM machines to dos - $type = "dos" if (arch() =~ /ppc/ && detect_devices::get_mac_model() =~ /^IBM/); - require("partition_table/$type.pm"); - bless $hd, "partition_table::$type"; - $hd->{primary} = $hd->clear_raw(); - delete $hd->{extended}; + fsedit::partition_table_clear_and_initialize([], $hd); } -sub zero_MBR_and_dirty { +#- by default, we assume the kernel doesn't automatically reread partition table: +sub need_to_tell_kernel { + my ($_hd) = @_; + 1; +} + +sub read_primary { my ($hd) = @_; - zero_MBR($hd); - $hd->{isDirty} = $hd->{needKernelReread} = 1; + my ($pt, $info) = eval { $hd->read_one(0) }; + $pt or return; + my $primary = partition_table::raw::pt_info_to_primary($hd, $pt, $info); + $primary->{is_hybrid_iso} = $hd->{current_pt_table_type} eq 'dos' && $hd->{fs_type_from_magic} eq 'iso9660'; + $hd->{primary} = $primary; + undef $hd->{extended}; + partition_table::verifyPrimary($primary); + 1; +} + +sub pt_info_to_primary { + my ($hd, $pt, $info) = @_; + + my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : (); + my @normal = grep { $_->{size} && !isEmpty($_) && !isExtended($_) } @$pt; + my $nb_special_empty = int(grep { $_->{size} && isEmpty($_) } @$pt); + + @extended > 1 and die "more than one extended partition"; + + put_in_hash($_, partition_table::hd2minimal_part($hd)) foreach @normal, @extended; + { raw => $pt, extended => $extended[0], normal => \@normal, info => $info, nb_special_empty => $nb_special_empty }; } #- ugly stuff needed mainly for Western Digital IDE drives #- try writing what we've just read, yells if it fails #- testing on last sector of head #0 (unused in 99% cases) #- -#- return false if the device can't be written to (especially for Smartmedia) +#- return false if the device cannot be written to (especially for Smartmedia) sub test_for_bad_drives { my ($hd) = @_; - log::l("test_for_bad_drives($hd->{file})"); - my $sector = $hd->{geom}{sectors} - 1; + my $sector = $hd->{geom} ? $hd->{geom}{sectors} - 1 : 0; + log::l("test_for_bad_drives($hd->{file} on sector #$sector)"); + sub error { die "$_[0] error: $_[1]" } - local *F; openit($hd, *F, 2) or die "can't open device"; + my $F = openit($hd, $::testing ? 0 : 2) or error(openit($hd) ? 'write' : 'read', "cannot open device"); my $seek = sub { - c::lseek_sector(fileno(F), $sector, 0) or die "seeking to sector $sector failed"; + c::lseek_sector(fileno($F), $sector, 0) or error('read', "seeking to sector $sector failed"); }; my $tmp; - &$seek; sysread F, $tmp, $SECTORSIZE or die "test_for_bad_drives: can't even read ($!)"; - &$seek; syswrite F, $tmp or die "test_for_bad_drives: can't even write ($!)"; + &$seek; sysread $F, $tmp, $SECTORSIZE or error('read', "cannot even read ($!)"); + return if $hd->{readonly} || $::testing; + &$seek; syswrite $F, $tmp or error('write', "cannot even write ($!)"); my $tmp2; - &$seek; sysread F, $tmp2, $SECTORSIZE or die "test_for_bad_drives: can't even read again ($!)"; + &$seek; sysread $F, $tmp2, $SECTORSIZE or die "test_for_bad_drives: cannot even read again ($!)"; $tmp eq $tmp2 or die -_("Something bad is happening on your drive. +N("Something bad is happening on your hard disk drive. A test to check the integrity of data has failed. -It means writing anything on the disk will end up with random trash"); +It means writing anything on the disk will end up with random, corrupted data."); +} + +sub start_write { + my ($_hd) = @_; + 1; +} + +sub end_write { + my ($_hd, $_handle) = @_; 1; } |