summaryrefslogtreecommitdiffstats
path: root/perl-install/network/ethernet.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/network/ethernet.pm')
-rw-r--r--perl-install/network/ethernet.pm198
1 files changed, 0 insertions, 198 deletions
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index 7eb54397e..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,198 +0,0 @@
-package network::ethernet; # $Id$
-
-
-use network::network;
-use modules;
-use modules::interactive;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet);
-
-sub configure_cable {
- my ($netcnx, $netc, $intf, $first_time) = @_;
-
- $netcnx->{type} = 'cable';
-
- $in->ask_from(N("Connect to the Internet"),
- N("Which dhcp client do you want to use ? (default is dhcp-client)"),
- [ { val => \$netcnx->{dhcp_client}, list => ["dhcp-client", "dhcpcd", "dhcpxd"] } ],
- ) or return;
-
- $in->do_pkgs->install($netcnx->{dhcp_client});
-
- go_ethernet($netc, $intf, 'dhcp', '', '', $first_time);
- write_cnx_script($netc, "cable",
-qq(
-/sbin/ifup $netc->{NET_DEVICE}
-),
-qq(
-/sbin/ifdown $netc->{NET_DEVICE}
-), $netcnx->{type});
- 1;
-}
-
-sub configure_lan {
- my ($netcnx, $netc, $intf, $first_time) = @_;
- configureNetwork($netc, $intf, $first_time) or return;
- configureNetwork2($in, $prefix, $netc, $intf);
- $netc->{NETWORKING} = "yes";
- if ($netc->{GATEWAY} || any { $_->{BOOTPROTO} =~ /dhcp/ } values %$intf) {
- $netcnx->{type} = 'lan';
- $netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
- $netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
- write_cnx_script($netc, "local network",
-qq(
-/etc/rc.d/init.d/network restart
-),
-qq(
-/etc/rc.d/init.d/network stop
-/sbin/ifup lo
-), $netcnx->{type});
- }
- $::isStandalone and modules::write_conf($prefix);
- 1;
-}
-
-sub conf_network_card {
- my ($netc, $intf, $type, $ipadr, $o_netadr) = @_;
- #-type =static or dhcp
- modules::interactive::load_category($in, 'network/main|gigabit|usb', !$::expert, 1);
- my @all_cards = conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $o_netadr) or
- $in->ask_warn('', N("No ethernet network adapter has been detected on your system.
-I cannot set up this connection type.")), return;
-
- my $interface = $in->ask_from_listf(N("Choose the network interface"),
- N("Please choose which network adapter you want to use to connect to Internet."),
- sub { my ($e) = @_; $e->[0] . ($e->[1] ? " (using module $e->[1])" : "") },
- \@all_cards) or return;
-
- modules::write_conf($prefix) if $::isStandalone;
-
- my $_device = conf_network_card_backend($netc, $intf, $type, $interface->[0], $ipadr, $o_netadr);
-# if ( $::isStandalone and !($type eq "dhcp")) {
-# $in->ask_yesorno(N("Network interface"),
-# N("I'm about to restart the network device:\n") . $device . N("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device");
-# }
- 1;
-}
-
-#- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling load_category($in, 'network/main|gigabit|usb', !$::expert, 1) or load_category_backend before calling this function. Basically, you call this function in 2 times.
-#- input
-#- $prefix
-#- $netc
-#- $intf
-#- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
-#- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
-#- $ipadr : facultative, ip address of the interface : string
-#- $netadr : facultative, netaddress of the interface : string
-#- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-#- $intf output: $device is the result of
-#- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
-#- $intf->{$device}->{BOOTPROTO} : $type
-#- $intf->{$device}->{NETMASK} : '255.255.255.0'
-#- $intf->{$device}->{NETWORK} : $netadr
-#- $intf->{$device}->{ONBOOT} : "yes"
-#- $netc output:
-#- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-#- output:
-#- $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call.
-#- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-sub conf_network_card_backend {
- my ($netc, $intf, $o_type, $o_interface, $o_ipadr, $o_netadr) = @_;
- #-type =static or dhcp
- if (!$o_interface) {
- my @all_cards = detect_devices::getNet();
-
- my @devs = detect_devices::pcmcia_probe();
- modules::mergein_conf("$prefix/etc/modules.conf");
- my $saved_driver;
- return map {
- my $interface = $_;
- my $interface_state = `LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C $::prefix/sbin/ifconfig "$interface"`;
- my $a = modules::get_alias($interface);
- my $b;
- foreach (@devs) {
- $_->{device} eq $interface and $b = $_->{driver};
- }
- $a ||= $b;
- $a and $saved_driver = $a;
- if_($::isInstall || $interface_state =~ /inet addr|Bcast|Mask|Interrupt|Base address/ && $a,
- [$interface, $saved_driver]);
- } @all_cards;
- }
- $o_interface =~ /eth[0-9]+/ or die("the interface is not an ethx");
-
- $netc->{NET_DEVICE} = $o_interface; #- one consider that there is only ONE Internet connection device..
-
- @{$intf->{$o_interface}}{qw(DEVICE BOOTPROTO NETMASK NETWORK ONBOOT)} = ($o_interface, $o_type, '255.255.255.0', $o_netadr, 'yes');
-
- $intf->{$o_interface}{IPADDR} = $o_ipadr if $o_ipadr;
- $o_interface;
-}
-
-sub go_ethernet {
- my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
- conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
- $netc->{NET_INTERFACE} = $netc->{NET_DEVICE};
- configureNetwork($netc, $intf, $first_time) or return;
- 1;
-}
-
-sub configureNetwork {
- my ($netc, $intf, $_first_time) = @_;
- local $_;
- modules::interactive::load_category($in, 'network/main|gigabit|usb|pcmcia', !$::expert, 1) or return;
- my @all_cards = conf_network_card_backend($netc, $intf);
- my @l = map { $_->[0] } @all_cards;
-
- foreach (@all_cards) {
- modules::remove_alias($_->[0]);
- modules::add_alias($_->[0], $_->[1]);
- }
-
- configureNetwork_step_1:
- $netc ||= {};
- my $last; foreach (@all_cards) {
- my $intf2 = findIntf($intf ||= {}, $_->[0]);
- add2hash($intf2, $last);
- add2hash($intf2, { NETMASK => '255.255.255.0' });
- configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $_->[1]) or return;
-
- $last = $intf2;
- }
- $last or return;
-
- configureNetwork_step_2:
- if ($last->{BOOTPROTO} !~ /static/) {
- $netc->{minus_one} = 1;
-
- $in->ask_from(N("Configuring network"), N("
-
-Enter a Zeroconf host name without any dot if you don't
-want to use the default host name."),
- [ { label => N("Zeroconf Host name"), val => \$netc->{ZEROCONF_HOSTNAME} },
- { label => N("Host name"), val => \$netc->{HOSTNAME}, advanced => 1 }
- ],
- complete => sub {
- if ($netc->{ZEROCONF_HOSTNAME} =~ /\./) {
- $in->ask_warn('', N("Zeroconf host name must not contain a ."));
- return 1;
- }
- 0;
- }
- ) or goto configureNetwork_step_1;
- } else {
- configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1;
- }
- network::network::miscellaneous_choose($in, $::o->{miscellaneous} ||= {}) or goto configureNetwork_step_2;
- 1;
-}
-
-1;
generated by cgit v1.2.1 (git 2.21.0) at 2025-10-25 22:34:04 +0000