summaryrefslogtreecommitdiffstats
path: root/perl-install/install/help/po/hi.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/install/help/po/hi.po')
-rw-r--r--perl-install/install/help/po/hi.po88
1 files changed, 44 insertions, 44 deletions
diff --git a/perl-install/install/help/po/hi.po b/perl-install/install/help/po/hi.po
index b9ea9ef87..064469ef9 100644
--- a/perl-install/install/help/po/hi.po
+++ b/perl-install/install/help/po/hi.po
@@ -132,7 +132,7 @@ msgstr "क्या आप इस लक्षण का उपयोग कर
#: ../help.pm:57
#, c-format
msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"Listed here are the existing Linux partitions detected on your hard disk drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
@@ -142,24 +142,24 @@ msgid ""
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
+"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"sd\" if it is a SCSI hard disk drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
+"hard disk drives:\n"
"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+" * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+" * \"b\" means \"slave hard disk drive on the primary IDE controller\";\n"
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" * \"c\" means \"master hard disk drive on the secondary IDE controller\";\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+" * \"d\" means \"slave hard disk drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"With SCSI hard disk drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"आपकी हार्ड डिस्क पर खोजे गये विद्यमान लिनक्स विभाजनों की यह सूची है । \n"
@@ -694,31 +694,31 @@ msgstr ""
#, c-format
msgid ""
"You now need to decide where you want to install the Mageia\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
+"operating system on your hard disk drive. If your hard disk drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
+"partition the drive. Basically, partitioning a hard disk drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mageia system.\n"
"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
+"Because the process of partitioning a hard disk drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
-"Depending on the configuration of your hard drive, several options are\n"
+"Depending on the configuration of your hard disk drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
+"your hard disk drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
+" * \"%s\". If Microsoft Windows is installed on your hard disk drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
@@ -734,14 +734,14 @@ msgid ""
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mageia system, choose\n"
+"your hard disk drive and replace them with your new Mageia system, choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
+" * \"%s\". This option appears when the hard disk drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
@@ -898,19 +898,19 @@ msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mageia system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard disk drive\n"
"partitions must be defined.\n"
"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
+"To create partitions, you must first select a hard disk drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
-"To partition the selected hard drive, you can use these options:\n"
+"To partition the selected hard disk drive, you can use these options:\n"
"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+" * \"%s\": this option deletes all partitions on the selected hard disk drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
+"partitions in the free space of your hard disk drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
@@ -926,21 +926,21 @@ msgid ""
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
+"originally on the hard disk drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
+"hard disk drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
+"and gives more information about the hard disk drive.\n"
"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+" * \"%s\": when you are finished partitioning your hard disk drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
@@ -1005,34 +1005,34 @@ msgstr "सामान्य/विशेषज्ञ विधा के म
#: ../help.pm:536
#, fuzzy, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
+"More than one Microsoft partition has been detected on your hard disk drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mageia operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"sd\" if it is a SCSI hard disk drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
+"hard disk drives:\n"
"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+" * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+" * \"b\" means \"slave hard disk drive on the primary IDE controller\";\n"
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" * \"c\" means \"master hard disk drive on the secondary IDE controller\";\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+" * \"d\" means \"slave hard disk drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"With SCSI hard disk drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"\"Windows name\" is the letter of your hard disk drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"आपकी हार्ड डिस्क पर एक से अधिक माइक्रोसाफ़्ट विभाजनों को खोजा गया है । \n"
@@ -1090,7 +1090,7 @@ msgid ""
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
+"If you wish to change how your hard disk drives are partitioned, or to change\n"
"the filesystem, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
@@ -1323,7 +1323,7 @@ msgid ""
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"your hard disk drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
@@ -1433,7 +1433,7 @@ msgstr "सचित्र इन्टरफ़ेस"
#: ../help.pm:861
#, fuzzy, c-format
msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
+"Choose the hard disk drive you want to erase in order to install your new\n"
"Mageia partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
@@ -1445,12 +1445,12 @@ msgstr ""
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
+"this hard disk drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard disk drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
+"present on this hard disk drive."
msgstr ""
"\"%s\" पर क्लिक करें, यदि आप इस हार्ड ड्राइव पर स्थित सभी सूचनाओं व विभाजनों को\n"
"मिटाना चाहते है । सावधान रहें, \"%s\" पर क्लिक करने के उपरान्त, \n"