diff options
Diffstat (limited to 'perl-install/harddrake/ui.pm')
| -rw-r--r-- | perl-install/harddrake/ui.pm | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/perl-install/harddrake/ui.pm b/perl-install/harddrake/ui.pm deleted file mode 100644 index 4930f487f..000000000 --- a/perl-install/harddrake/ui.pm +++ /dev/null @@ -1,302 +0,0 @@ -package harddrake::ui; - -use strict; - -require harddrake::data; -use common; -use my_gtk qw(:helpers :wrappers :various); -use interactive; - - -# { field => [ short_translation, full_description] } -my %fields = - ( - "alternative_drivers" => [ N("Alternative drivers"), - N("the list of alternative drivers for this sound card")], - "bus" => - [ N("Bus"), - N("this is the physical bus on which the device is plugged (eg: PCI, USB, ...)")], - "channel" => [N("Channel"), N("EIDE/SCSI channel")], - "bogomips" => [N("Bogomips"), N("The GNU/Linux kernel needs to do run a calculation loop at boot time - to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu.")], - "bus_id" => - [ N("Bus identification"), - N("- PCI and USB devices: this list the vendor, device, subvendor and subdevice PCI/USB ids")], - "bus_location" => - [ N("Location on the bus"), - N("- pci devices: this gives the PCI slot, device and function of this card -- eide devices: the device is either a slave or a master device -- scsi devices: the scsi bus and the scsi device ids")], - "cache size" => [ N("Cache size"), N("Size of the (second level) cpu cache") ], - "coma_bug" => [ N("Coma bug:"), N("Does this cpu has Cyrix 6x86 Coma bug ?") ], - "cpu family" => [ N("Cpuid family"), N("Family of the cpu (eg: 6 for i686 class)")], - "cpuid level" => [ N("Cpuid level"), N("Information level that one can obtain through the cpuid instruction")], - "cpu MHz" => [ N("Frequency (MHz)"), N("The cpu frequency in Mhz (Mega herz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)")], - "description" => [ N("Description"), N("This field describe the device")], - "device" => [ N("Old device file"), - N("old static device name used in dev package")], - "devfs_device" => [ N("New devfs device"), - N("new dinamic device name generated by incore kernel devfs")], - "driver" => [ N("Module"), N("the module of the GNU/Linux kernel that handle that device")], - "flags" => [ N("Flags"), N("CPU flags reported by the kernel")], - "fdiv_bug" => [ N("Fdiv bug"), - N("Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the attended precision when performing a Floating point DIVision (FDIV)") ], - - - "fpu" => [ N("Is FPU present"), N("yes means the processor has an arithmetic coprocessor")], - "fpu_exception" => [ N("Does FPU have an irq vector"), N("yes means the arithmetic coprocessor has an exception vector attached")], - "f00f_bug" => [N("F00f bug"), N("Early pentium were buggy and freezed when decoding the F00F bytecode")], - "hlt_bug" => [ N("Halt bug"), - N("Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used") ], - - "info" => [N("Floppy format"), N("Format of floppies the drive accept")], - "level" => [N("Level"), N("Sub generation of the cpu")], - "media_type" => [ N("Media class"), N("class of hardware device")], - "Model" => [N("Model"), N("hard disk model")], - "model" => [N("Model"), N("Generation of the cpu (eg: 8 for PentiumIII, ...)")], - "model name" => [N("Model name"), N("Official vendor name of the cpu")], - "nbuttons" => [ N("Number of buttons"), "the number of buttons the mouse have"], - "name" => [ N("Name"), "the name of the cpu"], - "port" => [N("Port"), N("network printer port")], - "processor" => [ N("Processor ID"), N("the number of the processor")], - "stepping" => [ N("Model stepping"), N("Stepping of the cpu (sub model (generation) number)") ], - "type" => [ N("Type"), N("The type of bus on which the mouse is connected")], - "Vendor" => [ N("Vendor"), N("the vendor name of the device")], - "vendor_id" => [ N("Vendor"), N("the vendor name of the processor")] - ); - - -my ($in, %IDs, $pid, $w); - -my (%options, %check_boxes); -my $conffile = "/etc/sysconfig/harddrake2/ui.conf"; - -my ($modem_check_box, $printer_check_box, $current_device); - -my @menu_items = - ( - { path => N("/_File"), type => '<Branch>' }, - { path => N("/_File").N("/_Quit"), accelerator => N("<control>Q"), callback => \&quit_global }, - { path => N("/_Options").N("/Autodetect _printers"), type => '<CheckItem>', - callback => sub { $options{PRINTERS_DETECTION} = $check_boxes{PRINTERS_DETECTION}->active } }, - { path => N("/_Options").N("/Autodetect _modems"), type => '<CheckItem>', - callback => sub { $options{MODEMS_DETECTION} = $check_boxes{MODEMS_DETECTION}->active } }, - { path => N("/_Help"), type => '<Branch>' }, - { - path => N("/_Help").N("/_Help..."), - callback => sub { - if ($current_device) { - $in->ask_warn(N("Harddrake help"), - N("Description of the fields:\n\n") - . join("\n\n", map { if_($fields{$_}[0], "$fields{$_}[0]: $fields{$_}[1]") } sort keys %$current_device)) - } else { - $in->ask_warn(N("Select a device !"), N("Once you've selected a device, you'll be able to see explanations on fields displayed on the right frame (\"Information\")")) - } - } - }, - { path => N("/_Help").N("/_Report Bug"), - callback => sub { unless (fork) { exec("drakbug --report harddrake2 &") } } }, - { path => N("/_Help").N("/_About..."), - callback => sub { - $in->ask_warn(N("About Harddrake"), - join ("", N("This is HardDrake, a Mandrake hardware configuration tool.\nVersion:"), " $harddrake::data::version\n", - N("Author:"), " Thierry Vignaud <tvignaud\@mandrakesoft.com> \n\n", - formatAlaTeX($::license))); - } - } - ); - -# fill the devices tree -sub detect { - my @class_tree; - foreach (@harddrake::data::tree) { - my ($Ident, $title, $icon, $configurator, $detector) = @$_; - next if ref($detector) ne "CODE"; #skip class witouth detector - next if $Ident =~ /(MODEM|PRINTER)/ && $::testing; - next if $Ident =~ /MODEM/ && !$options{MODEMS_DETECTION}; - next if $Ident =~ /PRINTER/ && !$options{PRINTERS_DETECTION}; -# print N("Probing %s class\n", $Ident); -# standalone::explanations("Probing %s class\n", $Ident); - - my @devices = &$detector; - next if !listlength(@devices); # Skip empty class (no devices) - my $devices_list; - foreach (@devices) { - $_->{custom_id} = harddrake::data::custom_id($_, $title); - if (exists $_->{bus} && $_->{bus} eq "PCI") { - my $i = $_; - $_->{bus_id} = join ':', map { if_($i->{$_} ne "65535", sprintf("%lx", $i->{$_})) } qw(vendor id subvendor subid); - $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(pci_bus pci_device pci_function); - } - # split description into manufacturer/description - ($_->{Vendor}, $_->{description}) = split(/\|/, $_->{description}) if exists $_->{description}; - - if (exists $_->{val}) { # Scanner ? - my $val = $_->{val}; - ($_->{Vendor}, $_->{description}) = split(/\|/, $val->{DESCRIPTION}); - } - # EIDE detection incoherency: - if (exists $_->{bus} && $_->{bus} eq 'ide') { - $_->{channel} = $_->{channel} ? N("secondary") : N("primary"); - delete $_->{info}; - } elsif ((exists $_->{id}) && $_->{bus} !~ /USB|PCI/) { - # SCSI detection incoherency: - my $i = $_; - $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(bus id); - } - if ($Ident eq "AUDIO") { - require harddrake::sound; - my $alter = harddrake::sound::get_alternative($_->{driver}); - $_->{alternative_drivers} = join(':', @$alter) if $alter->[0] ne 'unknown'; - } - foreach my $i (qw(vendor id subvendor subid pci_bus pci_device pci_function MOUSETYPE XMOUSETYPE unsafe val devfs_prefix wacom auxmouse)) { delete $_->{$i} } - $_->{device} = '/dev/'.$_->{device} if exists $_->{device}; - push @$devices_list, $_; - } - push @class_tree, [ $devices_list, [ [$title], 5], $icon, [ 0, ($title =~ /Unknown/ ? 0 : 1) ], $title, $configurator ]; - } - @class_tree; -} - -sub new { - my ($sig_id, $wait); - unless ($::isEmbedded) { - # so we don't stop the mcc's animation while detecting hw & building ui - $in = 'interactive'->vnew('su', 'default'); - $wait = $in->wait_message(N("Please wait"), N("Detection in progress")); - my_gtk::flush(); - } - %options = getVarsFromSh($conffile); - my @class_tree = &detect; - - # Build the gui - add_icon_path('/usr/share/pixmaps/harddrake2/'); - $w = my_gtk->new(N("Harddrake2 version ") . $harddrake::data::version); - $w->{window}->set_usize(760, 550) unless $::isEmbedded; - - $w->{window}->add(my $main_vbox = gtkadd(gtkadd($::isEmbedded ? new Gtk::VBox(0, 0) : - gtkadd(new Gtk::VBox(0, 0), - my $menubar = ugtk::create_factory_menu($w->{rwindow}, @menu_items)), - my $hpaned = new Gtk::HPaned), - my $statusbar = new Gtk::Statusbar)); - $main_vbox->set_child_packing($statusbar, 0, 0, 0, 'start'); - if ($::isEmbedded) { - $main_vbox->add(gtksignal_connect(my $but = new Gtk::Button(N("Quit")), - 'clicked' => \&quit_global)); - $main_vbox->set_child_packing($but, 0, 0, 0, 'start'); - } else { $main_vbox->set_child_packing($menubar, 0, 0, 0, 'start') } - - $hpaned->pack1(gtkadd(new Gtk::Frame(N("Detected hardware")), createScrolledWindow(my $tree = new Gtk::CTree(1, 0))), 1, 1); - $hpaned->pack2(my $vbox = gtkadd(gtkadd(gtkadd(new Gtk::VBox, - gtkadd(new Gtk::Frame(N("Information")), - gtkadd(new Gtk::HBox, - createScrolledWindow(my $text = new Gtk::Text)))), - my $module_cfg_button = new Gtk::Button(N("Configure module"))), - my $config_button = new Gtk::Button(N("Run config tool"))), 1, 1); - $vbox->set_child_packing($config_button, 0, 0, 0, 'start'); - $vbox->set_child_packing($module_cfg_button, 0, 0, 0, 'start'); - - my $color = gtkcolor(0x3100, 0x6400, 0xbc00); - my $wcolor = gtkcolor(0xFFFF, 0x6400, 0x6400); - $tree->set_column_auto_resize(0, 1); - - $tree->signal_connect('select_row', sub { - my ($ctree, $row, $column, $event) = @_; - my $node = $ctree->node_nth($row); - my ($name, undef) = $tree->node_get_pixtext($node,0); - $current_device = $tree->{data}{$name}; - - if ($current_device) { - $text->hide; - $text->backward_delete($text->get_point); - foreach my $i (sort keys %$current_device) { - if ($fields{$i}[0]) { - $text->insert("", $text->style->black, "", $fields{$i}[0] . ": "); - $text->insert("", $i eq 'driver' && $current_device->{$i} eq 'unknown' ? $wcolor : $color, - "", "$current_device->{$i}\n\n"); - } else { print "Skip \"$i\" field => \"$current_device->{$i}\"\n\n" } - } - disconnect($module_cfg_button, 'module'); - - # we've valid driver, let's offer to configure it - if (exists $current_device->{driver} && $current_device->{driver} !~ /(unknown|.*\|.*)/ && $current_device->{driver} !~ /^Card:/) { - $module_cfg_button->show; - $IDs{module} = $module_cfg_button->signal_connect(clicked => sub { - require modules::interactive; - modules::interactive::config_window($in, $current_device); - gtkset_mousecursor_normal(); - }); - } - disconnect($config_button, 'tool'); - $text->show; - my $configurator = $tree->{configurator}{$name}; - - return unless -x $configurator; - - # we've a configurator, let's add a button for it and show it - $IDs{tool} = $config_button->signal_connect(clicked => sub { - return if defined $pid; - if ($pid = fork()) { - $sig_id = $statusbar->push($statusbar->get_context_id("id"), N("Running \"%s\" ...", $configurator)); - } else { exec($configurator) or die "$configurator missing\n" } - }); - $config_button->show; - } else { - $text->backward_delete($text->get_point); # erase all previous text - $config_button->hide; - $module_cfg_button->hide; - } - }); - - # Fill the graphic tree with a "tree branch" widget per device category - foreach (@class_tree) { - my ($devices_list, $arg, $icon, $arg2, $title, $configurator) = @$_; - my $hw_class_tree = $tree->insert_node(undef, undef, @$arg, (gtkcreate_png($icon)) x 2, @$arg2); - # Fill the graphic tree with a "tree leaf" widget per device - foreach (@$devices_list) { - my $custom_id = $_->{custom_id}; - delete $_->{custom_id}; - $custom_id .= ' ' while exists($tree->{data}{$custom_id}); - my $hw_item = $tree->insert_node($hw_class_tree, undef, [$custom_id ], 5, (undef) x 4, 1, 0); - $tree->{data}{$custom_id} = $_; - $tree->{configurator}{$custom_id} = $configurator; - } - } - - $SIG{CHLD} = sub { undef $pid; $statusbar->pop($sig_id) }; - $w->{rwindow}->signal_connect(delete_event => \&quit_global); - $w->{rwindow}->set_position('center') unless $::isEmbedded; - - foreach (['PRINTERS_DETECTION', N("/Autodetect printers")], ['MODEMS_DETECTION', N("/Autodetect modems")]) { - $check_boxes{$_->[0]} = $menubar->{factory}->get_widget("<main>".N("/Options").$_->[1]); - $options{$_->[0]} = 0 unless defined($options{$_->[0]}); # force detection by default - $check_boxes{$_->[0]}->set_active($options{$_->[0]}); # restore saved values - } - - $w->{rwindow}->show_all(); - undef $wait; - gtkset_mousecursor_normal(); - foreach ($module_cfg_button, $config_button) { $_->hide }; - $in = 'interactive'->vnew('su', 'default') if $::isEmbedded; - $w->main; -} - - -sub quit_global { - kill(15, $pid) if $pid; - setVarsInSh($conffile, \%options); - $w->{rwindow}->destroy; - my_gtk->exit(0); -} - -# remove a signal handler from a button & hide it if needed -sub disconnect { - my ($button, $id) = @_; - if ($IDs{$id}) { - $button->signal_disconnect($IDs{$id}); - $button->hide; - undef $IDs{$id}; - } -} - -1; |