diff options
Diffstat (limited to 'perl-install/devices.pm')
| -rw-r--r-- | perl-install/devices.pm | 253 |
1 files changed, 113 insertions, 140 deletions
diff --git a/perl-install/devices.pm b/perl-install/devices.pm index 496a593bc..7ac79dcce 100644 --- a/perl-install/devices.pm +++ b/perl-install/devices.pm @@ -1,4 +1,4 @@ -package devices; # $Id$ +package devices; use diagnostics; use strict; @@ -8,63 +8,55 @@ use run_program; use log; use c; -sub size($) { - local *F; - sysopen F, $_[0], 0 or log::l("open $_[0]: $!"), return 0; - - my $valid_offset = sub { sysseek(F, $_[0], 0) && sysread(F, my $a, 1) }; - - #- first try getting the size nicely - if (my $size = c::total_sectors(fileno F)) { - return $size * $common::SECTORSIZE; - } - - #- sad it didn't work, well searching the size using the dichotomy algorithm! - my $low = 0; - my ($high, $mid); - - #- first find n where 2^n < size <= 2^n+1 - for ($high = 1; $high > 0 && &$valid_offset($high); $high *= 2) { $low = $high } - - while ($low < $high - 1) { - $mid = int ($low + $high) / 2; - &$valid_offset($mid) ? $low : $high = $mid; - } - $low + 1; -} - sub del_loop { my ($dev) = @_; run_program::run("losetup", "-d", $dev); } -sub find_free_loop { - foreach (0..7) { +sub find_free_loop() { + foreach (0..255) { my $dev = make("loop$_"); - local *F; - sysopen F, $dev, 2 or next; - !ioctl(F, c::LOOP_GET_STATUS(), my $tmp) && $! == 6 or next; #- 6 == ENXIO - close F; + sysopen(my $F, $dev, 2) or next; + !ioctl($F, c::LOOP_GET_STATUS(), my $_tmp) && $! == 6 or next; #- 6 == ENXIO return $dev; } die "no free loop found"; } sub set_loop { - my ($file, $encrypt_key, $encryption) = @_; + my ($file, $o_encrypt_key, $o_encryption) = @_; + require modules; + eval { modules::load('loop') }; my $dev = find_free_loop(); - if ($encrypt_key && $encryption) { - my $cmd = "losetup -p 0 -e $encryption $dev $file"; + if ($o_encrypt_key && $o_encryption) { + eval { modules::load('cryptoloop', list_modules::category2modules('various/crypto')) }; + my $cmd = "losetup -p 0 -e $o_encryption $dev $file"; log::l("calling $cmd"); - local *F; - open F, "|$cmd"; - print F $encrypt_key; - close F or die "losetup failed"; + open(my $F, "|$cmd"); + print $F $o_encrypt_key; + close $F or die "losetup failed"; } else { - run_program::run("losetup", $dev, $file) or return; + run_program::run("losetup", $dev, $file) + || run_program::run("losetup", "-r", $dev, $file) or return; } $dev; } +sub find_compressed_image { + my ($name) = @_; + foreach (0..255) { + my $dev = make("loop$_"); + my ($file) = `losetup $dev 2>/dev/null` =~ m!\((.*?)\)! or return; + $file =~ s!^/sysroot/!/!; + basename($file) eq $name and return $dev, $file; + } + undef; +} + +sub init_device_mapper() { + require modules; + eval { modules::load('dm-mod') }; +} + sub entry { my ($type, $major, $minor); local ($_) = @_; @@ -72,25 +64,6 @@ sub entry { if (/^0x([\da-f]{3,4})$/i) { $type = c::S_IFBLK(); ($major, $minor) = unmakedev(hex $1); - } elsif (/^sd(.)(\d{0,2})/) { - $type = c::S_IFBLK(); - $major = 8; - $minor = 16 * (ord($1) - ord('a')) + ($2 || 0); - } elsif (/^hd(.)(\d{0,2})/) { - $type = c::S_IFBLK(); - ($major, $minor) = - @{ $ {{'a' => [3, 0], 'b' => [3, 64], - 'c' => [22,0], 'd' => [22,64], - 'e' => [33,0], 'f' => [33,64], - 'g' => [34,0], 'h' => [34,64], - 'i' => [56,0], 'j' => [56,64], - 'k' => [57,0], 'l' => [57,64], - 'm' => [88,0], 'n' => [88,64], - 'o' => [89,0], 'p' => [89,64], - 'q' => [90,0], 'r' => [90,64], - 's' => [91,0], 't' => [91,64], - }}{$1} or die "unknown device $_" }; - $minor += $2 || 0; } elsif (/^ram(.*)/) { $type = c::S_IFBLK(); $major = 1; @@ -105,50 +78,57 @@ sub entry { $type = c::S_IFBLK(); $major = ($1 eq 'ida' ? 72 : 104) + $2; $minor = 16 * $3 + ($4 || 0); - } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) { - # ATA raid "ataraid/d0{p1}" - $type = c::S_IFBLK(); - $major = 114; - $minor = 16 * $1 + ($2 || 0); - } elsif (/(.*?)(\d+)$/) { - ($type, $major, $minor) = - @{ ${{"fd" => [ c::S_IFBLK(), 2, 0 ], - "hidbp-mse-" => [ c::S_IFCHR(), 10, 32 ], - "lp" => [ c::S_IFCHR(), 6, 0 ], - "usb/lp" => [ c::S_IFCHR(), 180, 0 ], - "input/event" => [ c::S_IFCHR(), 13, 64 ], - "loop" => [ c::S_IFBLK(), 7, 0 ], - "md" => [ c::S_IFBLK(), 9, 0 ], - "nst" => [ c::S_IFCHR(), 9, 128], - "scd" => [ c::S_IFBLK(), 11, 0 ], - "ttyS" => [ c::S_IFCHR(), 4, 64 ], - }}{$1}}; - $minor += $2; + } elsif (my ($prefix, $nb) = /(.*?)(\d+)$/) { + my $f = ${{ + "md" => sub { c::S_IFBLK(), 9, 0 }, + "ubd/" => sub { c::S_IFBLK(), 98, 0 }, + }}{$prefix}; + if ($f) { + ($type, $major, $minor) = $f->(); + $minor += $nb; + } } unless ($type) { ($type, $major, $minor) = - @{ ${{"aztcd" => [ c::S_IFBLK(), 29, 0 ], - "bpcd" => [ c::S_IFBLK(), 41, 0 ], - "cdu31a" => [ c::S_IFBLK(), 15, 0 ], - "cdu535" => [ c::S_IFBLK(), 24, 0 ], - "cm206cd" => [ c::S_IFBLK(), 32, 0 ], - "gscd" => [ c::S_IFBLK(), 16, 0 ], - "mcd" => [ c::S_IFBLK(), 23, 0 ], - "mcdx" => [ c::S_IFBLK(), 20, 0 ], - "mem" => [ c::S_IFCHR(), 1, 1 ], - "optcd" => [ c::S_IFBLK(), 17, 0 ], - "kbd" => [ c::S_IFCHR(), 11, 0 ], - "psaux" => [ c::S_IFCHR(), 10, 1 ], - "atibm" => [ c::S_IFCHR(), 10, 3 ], - "random" => [ c::S_IFCHR(), 1, 8 ], - "sbpcd" => [ c::S_IFBLK(), 25, 0 ], - "sjcd" => [ c::S_IFBLK(), 18, 0 ], - "tty" => [ c::S_IFCHR(), 5, 0 ], - "usbmouse"=> [ c::S_IFCHR(), 13, 63], #- aka /dev/input/mice - "adbmouse"=> [ c::S_IFCHR(), 10, 10], #- PPC - "zero" => [ c::S_IFCHR(), 1, 5 ], - }}{$_} or die "unknown device $_ (caller is " . join(":", caller()) . ")" }; + @{ ${{ + "atibm" => [ c::S_IFCHR(), 10, 3 ], + }}{$_} || [] }; + } + # Lookup non listed devices in /sys + unless ($type) { + my $sysdev; + if (m!input/(.*)! && -e "/sys/class/input/$1/dev") { + $sysdev = "/sys/class/input/$1/dev"; + $type = c::S_IFCHR(); + } elsif (-e "/sys/block/$_/dev") { + $sysdev = "/sys/block/$_/dev"; + $type = c::S_IFBLK(); + } elsif (/^(.+)(\d+)$/ && -e "/sys/block/$1/$_/dev") { + $sysdev = "/sys/block/$1/$_/dev"; + $type = c::S_IFBLK(); + } + ($major, $minor) = split(':', chomp_(cat_($sysdev))); } + # Lookup partitions in /proc/partitions in case /sys was not available + unless ($type) { + if (-e "/proc/partitions") { + if (cat_("/proc/partitions") =~ /^\s*(\d+)\s+(\d+)\s+\d+\s+$_$/m) { + ($major, $minor) = ($1, $2); + $type = c::S_IFBLK(); + } + } + } + # Try to access directly the device + # Now device mapper devices are links and do not appear in /proc or /sys + unless ($type) { + if (-e "/dev/$_") { + my (undef, undef, $mode, undef, undef, undef, $rdev, undef) = stat("/dev/$_"); + ($major, $minor) = unmakedev($rdev); + $type = $mode & c::S_IFMT(); + } + } + + $type or internal_error("unknown device $_"); ($type, $major, $minor); } @@ -156,65 +136,58 @@ sub entry { sub make($) { local $_ = my $file = $_[0]; - if (m,^(.*/(?:dev|tmp))/(.*),) { + if (m!^(.*/dev)/(.*)!) { $_ = $2; } else { - $file =~ m|^/| && -e $file or $file = "/tmp/$_"; $file =~ m|^/| && -e $file or $file = "/dev/$_"; } -e $file and return $file; #- assume nobody takes fun at creating files named as device - my ($type, $major, $minor) = eval { entry($_) }; - $@ and die "unknown device $_ (caller is " . join(":", caller()) . ")"; - - if ($file =~ m|/dev/| && -e '/dev/.devfsd') { - #- argh, creating devices is no good with devfs... - #- return the file even if the device file doesn't exist - #- the caller will fail or not, better compatibility than raising an exception here - return $file; - } + my ($type, $major, $minor) = entry($_); #- make a directory for this inode if needed. - mkdir dirname($file), 0755; + mkdir_p(dirname($file)); - syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!"; + syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or do { + die "mknod failed (dev $_): $!" if ! -e $file; # we may have raced with udev + }; $file; } +sub simple_partition_scan { + my ($part) = @_; + $part->{device} =~ /((?:[hsv]|xv)d[a-z]|mmcblk|(nvme\d+n)\d+p)(\d+)$/; +} +sub part_number { + my ($part) = @_; + (simple_partition_scan($part))[1]; +} +sub part_prefix { + my ($part) = @_; + (simple_partition_scan($part))[0]; +} -#- only isomorphic entries are allowed, -#- i.e. entries which can go devfs -> normal and normal -> devfs -my %to_devfs = ( - psaux => 'misc/psaux', - usbmouse => 'input/mouse0', -); -my %to_devfs_prefix = ( - ttyS => 'tts/', -); - -sub to_devfs { +sub prefix_for_dev { my ($dev) = @_; - if (my $r = $to_devfs{$dev}) { - return $r; - } elsif ($dev =~ /(.*?)(\d+)$/) { - my $r = $to_devfs_prefix{$1}; - return "$r$2" if $r; - } - undef; + $dev . ($dev =~ /\d$/ ? 'p' : ''); } -sub from_devfs { +sub should_prefer_UUID { my ($dev) = @_; - my %from_devfs = reverse %to_devfs; - if (my $r = $from_devfs{$dev}) { - return $r; - } elsif ($dev =~ /(.*?)(\d+)$/) { - my %from_devfs_prefix = reverse %to_devfs_prefix; - my $r = $from_devfs_prefix{$1}; - return "$r$2" if $r; - } - undef; + $dev =~ /^((?:[hsv]|xv)d|mmcblk|nvme)/; } +sub symlink_now_and_register { + my ($if_struct, $of) = @_; + my $if = $if_struct->{device}; + + #- add a static udev device node, we can't do it with a udev rule, + #- eg, ttySL0 is a symlink created by a daemon + symlinkf($if, "$::prefix/usr/lib/udev/devices/$of"); + + symlinkf($if, "/dev/$of"); +} + + 1; |