summaryrefslogtreecommitdiffstats
path: root/tools/alpha/cd
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2000-02-23 11:16:10 +0000
committerPascal Rigaux <pixel@mandriva.com>2000-02-23 11:16:10 +0000
commitc19d700d0608cba8d8d208238846b94505612c29 (patch)
tree8845c807e2b8a53a0927afb684a83f74c8bc167d /tools/alpha/cd
parent65a3ecd62fa7a179bfa41ba1a05a34569ae4b621 (diff)
downloaddrakx-c19d700d0608cba8d8d208238846b94505612c29.tar
drakx-c19d700d0608cba8d8d208238846b94505612c29.tar.gz
drakx-c19d700d0608cba8d8d208238846b94505612c29.tar.bz2
drakx-c19d700d0608cba8d8d208238846b94505612c29.tar.xz
drakx-c19d700d0608cba8d8d208238846b94505612c29.zip
no_comment
Diffstat (limited to 'tools/alpha/cd')
-rw-r--r--tools/alpha/cd/Makefile4
-rw-r--r--tools/alpha/cd/up1000/5100440A.txt25
-rw-r--r--tools/alpha/cd/up1000/README.txt16
-rwxr-xr-xtools/alpha/cd/up1000/apb.cfg2
-rwxr-xr-xtools/alpha/cd/up1000/apb.exebin0 -> 120832 bytes
-rw-r--r--tools/alpha/cd/up1000/install.txt356
-rw-r--r--tools/alpha/cd/up1000/up1000.palbin0 -> 30464 bytes
7 files changed, 403 insertions, 0 deletions
diff --git a/tools/alpha/cd/Makefile b/tools/alpha/cd/Makefile
index c5235660b..9a1408381 100644
--- a/tools/alpha/cd/Makefile
+++ b/tools/alpha/cd/Makefile
@@ -2,3 +2,7 @@ install:
cp -f README $(ROOTDEST)
install -d $(ROOTDEST)/etc
cp -f aboot.cnf $(ROOTDEST)/etc
+
+ install -d $(ROOTDEST)/boot
+ cp -a up1000 $(ROOTDEST)/boot
+ mv -f $(ROOTDEST)/boot/up1000/apb.* $(ROOTDEST)
diff --git a/tools/alpha/cd/up1000/5100440A.txt b/tools/alpha/cd/up1000/5100440A.txt
new file mode 100644
index 000000000..ba6c5a9f1
--- /dev/null
+++ b/tools/alpha/cd/up1000/5100440A.txt
@@ -0,0 +1,25 @@
+The source code for the object code and executable programs licensed
+
+under GNU General Public License Version 2, June 1991 are available
+
+from Alpha Processor, Inc. at the API web site
+
+
+
+ http://www.Alpha-Processor.COM
+
+
+
+For each distributed object or executable form of the programs, you
+
+will find an identifying API part number. You may use that part
+
+number to find the corresponding machine-readable source code.
+
+
+
+If you have any questions, contact Customer Support at API.
+
+
+
+51-0044-0A \ No newline at end of file
diff --git a/tools/alpha/cd/up1000/README.txt b/tools/alpha/cd/up1000/README.txt
new file mode 100644
index 000000000..88f8855d3
--- /dev/null
+++ b/tools/alpha/cd/up1000/README.txt
@@ -0,0 +1,16 @@
+Known issues with the UP1000 system:
+
+1. Linux boot via floppy disk drive:
+ When booting Linux via APB, it takes about 5 minutes for APB to load the kernel image from a floppy device. Booting from a hard disk takes a matter of seconds.
+
+2. 2x AGP card:
+ a. At the present time, 2x AGP driver for Linux is not available so 2x mode has not been tested.
+ b. The following cards have been used in 1x AGP mode: cards with Permedia-2 controller: Fire
+ GL1000, ELSA Synergy, E&S, Matrox Millenium G200 and Stealth 2000.
+ c. 3Dfx Rage Pro Turbo card does not work because the option ROM on the AGP card is
+ not properly emulated by Alpha BIOS.
+
+3. Linux installation:
+ a. To install Linux, please click the "Utilities" menu in the Alpha BIOS setup mode and the
+ "Run Maintenance Program". And follow the Linux installation procedure that API provides.
+ b. Please do not use the "Install Linux" menu in the "Operating System" menu. \ No newline at end of file
diff --git a/tools/alpha/cd/up1000/apb.cfg b/tools/alpha/cd/up1000/apb.cfg
new file mode 100755
index 000000000..366e42bb4
--- /dev/null
+++ b/tools/alpha/cd/up1000/apb.cfg
@@ -0,0 +1,2 @@
+floppy|bootl boot/up1000/up1000.pal boot/instboot.gz root=/dev/fd0 load_ramdisk=1 mdkinst rw ramdisk_size=32000
+floppy_text|bootl boot/up1000/up1000.pal boot/instboot.gz root=/dev/fd0 load_ramdisk=1 mdkinst rw ramdisk_size=32000 text
diff --git a/tools/alpha/cd/up1000/apb.exe b/tools/alpha/cd/up1000/apb.exe
new file mode 100755
index 000000000..4b3aa6099
--- /dev/null
+++ b/tools/alpha/cd/up1000/apb.exe
Binary files differ
diff --git a/tools/alpha/cd/up1000/install.txt b/tools/alpha/cd/up1000/install.txt
new file mode 100644
index 000000000..61dff54f9
--- /dev/null
+++ b/tools/alpha/cd/up1000/install.txt
@@ -0,0 +1,356 @@
+
+- Contents of floppy
+
+apb.exe Alpha Processor bootloader v. 1.0.1.
+apb.cfg Sample apb configuration file.
+up1000.pal PAL code for Linux on UP1000.
+vmlinux.gz Linux kernel v. 2.2.12 with UP1000 patch.
+System.gz Kernel Symbol table.
+INSTALL This file.
+
+
+- Installation of RedHat Linux from CD ROM
+
+1. Copy this directory to a floppy disk.
+
+2. Insert floppy disk and RedHat Linux CD ROM.
+ This installation guide assumes
+ - hard disk is connected to primary channel as a master
+ - CD ROM drive is connected to primary channel as a slave
+
+3. From AlphaBIOS run apb.exe as a utility program.
+ [F2]->Utility->Run maintanace program
+
+4. At the apb command prompt, type
+ apb> cd floppy
+ apb> bootl up1000.pal vmlinux.gz root=/dev/hdb
+ This assumes you have an ATAPI CD ROM drive which Linux recognizes
+ as /dev/hdb (you may have to try /dev/hda, /dev/hdc, etc. depending
+ on your configuration. For a SCSI CD ROM drive, /dev/scd or
+ /dev/scd0.
+
+5. This should get you into the RedHat installation program. During the
+ disk partitioning phase of the installation be sure to allocate a small
+ FAT partition to be used as the "boot" partition. 10 MB should be ample.
+ If you choose 'Workstation' or 'Server' package then you don't need to
+ partition the disk by yourself.
+ * Follow the common redhat installation procedure.
+ * During install, Don't configure X server,
+ * Select 'Startup through ARC console' on timezone setup menu.
+
+6. Due to bugs in redhat 6.0, FAT partition is not formatted during installation
+ depends on package selection.
+ So, After installation, run apb.exe from flopy again and at the
+ apb command prompt, type
+ apb> cd floppy
+ apb> bootl up1000.pal vmlinux.gz root=/dev/hda5 single
+ You'll get shell prompt then type following commands.
+ # mkfs -t msdos /dev/hda1
+ # mount /dev/hda1 /dos
+ # mcopy a:*.* /dos
+ # gzip -dc /dos/system.gz > /boot/System.map
+ # ln -s Tsunami /etc/alpha_systype
+ # init 6
+
+8. Configure the OS selection menu of AlphaBIOS to start apb.exe
+ from the boot partition.
+ In 'OS Selection' menu([F2]->Operating system->OS selection setup),
+ Make an entry like this.
+
+ Boot name: Linux
+ Boot file: Disk 0 Partition 1 \apb.exe
+ OS Path : Disk 0 Partition 2 \winnt
+ OS Options:
+
+ OS Path doesn't have any meaning, just leave it intact.
+
+9. You can run apb from hard disk by selecting what you configured on step 8.
+
+10. Set the environment variable APB_DEVICE to be the AlphaBIOS name
+ of the boot partition.
+ For example,
+ apb> setenv APB_DEVICE scsi(0)disk(0)rdisk(0)partition(1)
+ type 'cd' once to make above environment variable change to be applied.
+ apb> cd
+
+11. Now, You can boot linux by selecting 'Linux' on BIOS' OS boot menu
+ and then type this on apb prompt
+
+ apb> bootl up1000.pal vmlinux.gz root=/dev/hda5
+
+ If you don't want to type above long line everytime. You have two options
+ 1. Create apb.cfg file under /dos directory, Its contents look like
+
+ linux|bootl up1000.pal vmlinux.gz root=/dev/hda5
+
+ then you can boot linux by typying
+
+ apb> boot linux
+
+ 2. Put option string in OS Selection setup menu of BIOS setup.
+
+ Boot name: Linux
+ Boot file: Disk 0 Partition 1 \apb.exe
+ OS Path : Disk 0 Partition 2 \winnt
+ OS Options: bootl up1000.pal vmlinux.gz root=/dev/hda5
+
+ Then this setup will boot linux without apb prompt.
+
+
+-------------------------------------------------------------------------------
+
+
+ APB -- Alpha Processor Bootstrap Loader for AlphaBIOS
+
+ Alpha Processor, Inc.
+ 130C Baker Ave. Ext.
+ Concord, MA 01742, USA
+
+ David Daniel, Soohoon Lee, Stig Telfer
+ customer.support@alpha-processor.com
+
+========================================================================
+
+ Copyright (c) 1999, Alpha Processor, Inc.
+ All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the copyright notice and this permission notice appear
+in all copies of software and supporting documentation, and that the
+name of Alpha Processor not be used in advertising or publicity
+pertaining to distribution of the software without specific, written
+prior permission. Alpha Processor grants this permission provided
+that you prominently mark, as not part of the original, any
+modifications made to this software or documentation.
+
+Alpha Processor disclaims all warranties and/or guarantees with regard
+to this software, including all implied warranties of fitness for a
+particular purpose and merchantability, and makes no representations
+regarding the use of, or the results of the use of, the software and
+documentation in terms of correctness, accuracy, reliability,
+currentness or otherwise; and you rely on the software, documentation
+and results solely at your own risk.
+
+========================================================================
+
+
+0. Introduction
+
+APB is a bootstrap loader for Alpha processor based systems with
+AlphaBIOS firmware. It is primarily intended to be used for booting
+Linux, though it may also be useful for free BSD derived systems.
+
+APB borrows ideas and some code from many places, notably Linux and
+other Linux loaders for Alpha systems (aboot and MILO), and the ARCDos
+example in the ARC Application Development Kit. APB can also be
+linked against zlib to support reading compressed kernel and PALcode
+images. See the file CREDITS for details.
+
+
+1. Using APB
+
++ Overview
+
+APB presents a simple command line interface with the following
+commands
+
+ boot TARGET boot a target in the configuration file
+ bootl PALCODE KERNEL ARG1 ... boot Unix
+ cd DEVICE set the current device
+ cp | copy FILE1 FILE2 copy files
+ exit | quit exit to AlphaBIOS
+ halt | reset system shutdown options
+ ls | dir list files on the current device
+ mkdir DIR make a directory
+ more FILE list a file
+ mv | rename FILE1 FILE2 rename a file
+ pwd print the current device
+ rm | delete FILE delete a file
+ printenv [NAME] print environment variable(s)
+ setenv [NAME [VAL]] (un)set environment variable
+ show targets | devices show information
+
+At any time an AlphaBIOS is device is selected as the default or
+current device. On initialization this is set to the value of the
+APB_DEVICE firmware environment variable, or "multi(0)disk(0)fdisk(0)"
+(usually the floppy device) if this is not set.
+
+To change the default device, use the "cd" command. For example
+
+ cd scsi(0)disk(0)rdisk(0)partition(2)\os\linux
+
+sets the default device to be the second partition of the disk 0 on
+the 0th SCSI controller. To save this for future invocations, set the
+APB_DEVICE firmware environment variable using the "setenv" command:
+
+ setenv APB_DEVICE scsi(0)disk(0)rdisk(0)partition(2)\os\linux
+
+After this you can return to this device using "cd".
+
+Also the special targets
+
+ cd floppy
+ cd cdrom
+
+will take you to the (first) floppy and CD-ROM drives respectively.
+
+If there is a file system supported by AlphaBIOS on the device -- FAT,
+ISO 9660 (CD-ROM) -- then a directory listing can be obtained using
+the "dir" or "ls" command:
+
+ apb> ls
+ Directory listing of scsi(0)disk(0)rdisk(0)partition(2):
+ APB.CFG
+ APB.EXE
+ LINUX.PAL
+ VMLINUX
+
+
++ Booting from disk
+
+The recommended way to boot a system using APB is set aside a small
+(10 - 30 MB) FAT partition on one disk to be used as a boot partition.
+The following files should be placed on the boot partition:
+
+ The APB image (APB.EXE)
+ The PALcode image
+ The kernel image
+ An optional configuration file "APB.CFG" (see below)
+
+Run APB (either from floppy or from the boot partition and use it to
+set the environment variable APB_DEVICE to the name of the boot
+partition. For example if the boot partition is the first partition
+on a SCSI disk with SCSI ID 3 on the first SCSI controller, and the files are in directory \os\linux set APB_DEVICE using
+
+ apb> setenv APB_DEVICE scsi(0)disk(3)rdisk(0)partition(1)\os\linux
+
+To enable autoboot
+
+ apb> setenv APB_AUTOBOOT 1
+
+This performs the first boot command it finds in the APB configuration
+file, unless interrupted.
+
+Otherwise boot manually using a command such as
+
+ apb> bootl palcode kernel [kernel_arg1 [kernel_arg1 ...]]
+
+or use one of the labels defined in the APB configuration file, for
+example
+
+ apb> boot linux
+
+See below for the configuration file format.
+
++ Environment variables
+
+APB uses the following firmware environment variables to set default
+noptions:
+
+ APB_DEVICE Default device for all operations
+ APB_AUTOBOOT Determines whether an autoboot should be attempted
+
+If these are not set on invocation, then they are set to reasonable
+values, namely
+
+ APB_DEVICE=multi(0)disk(0)fdisk(0)
+ APB_AUTOBOOT=0
+
++ Configuration file
+
+APB consults a configuration file "APB.CFG" that is assumed to be
+located at the current device path (initially given by environment
+variable APB_DEVICE). The file consists of lines that are either
+comments, or boot commands prefixed with a mnemonic label. For example
+
+ # This is comment
+ linux-2.2|bootl linux.pal vmlinux.gz root=/dev/sda3
+ linux-2.0|bootl linux.pal vml20.gz root=/dev/sda3
+
+In this case, to boot linux-2.2, type
+
+ apb> boot linux-2.2
+
+which is equivalent to
+
+ apb> bootl linux.pal vmlinux.gz root=/dev/sda3
+
+If the AUTO_BOOT environment variable is set TRUE, then the default
+configuration will be booted after 10 seconds, unless a key is
+pressed.
+
++ Boot devices
+
+APB can boot from any filesystem supported by AlphaBIOS. At present
+these are limited to FAT, NTFS and ISO 9660 (CD-ROM).
+
++ Booting from a network device
+
+Not yet implemented.
+
+
+2. Building APB
+
+APB is an AlphaBIOS/ARC application. Currently it must be built on an
+Microsoft Windows NT 4.0 Alpha processor system, with Microsoft Visual
+C++ 5.0 (or higher), the Microsoft Software Development Kit (SDK) and
+Device Driver Development Kit (DDK) for NT 4.0, and Compaq ARC
+Application Development Kit (ADK) 1.3.
+
+Optionally, APB can be linked against zlib (a free compression
+library) to support reading compressed kernel and PALcode images.
+
+To build, open a command window, set up the environment:
+
+ VC++ (e.g "C:Program Files\DevStudio\VC\bin\vcvars32.bat")
+ DDK (e.g. "C:\DDK\bin\setenv.bat C:\DDK")
+ ADK (e.g. "set ADK=C:\adkv13\adk")
+
+and then and make using nmake. For example:
+
+ C:\apb-1.0> nmake
+
+where the DDK has been installed on the C: drive.
+
+If building with compressed file support, obtain and unpack zlib
+(http://www.cdrom.com/pub/infozip/zlib/), set the variable ZLIB to
+the zlib directory, and then make. For example
+
+ C:\apb-1.0> set ZLIB=C:\zlib-1.1.3
+ C:\apb-1.0> nmake
+
+In either case, the executable is placed in the "obj\alpha"
+subdirectory.
+
+
+3. What APB does
+
+Booting Linux with APB involves the following steps:
+
+ AlphaBIOS loads and transfers control to APB.
+
+ APB is called with an argument specifying the device (as known to
+ AlphaBIOS) from which to read the Linux kernel, and additional
+ arguments to be passed on to the kernel.
+
+ APB sets up the environment for Linux, including loading and
+ switching to the correct PAL code, setting up the HWRPB, copying
+ kernel arguments to the right location in memory etc.
+
+ APB reads the Linux kernel image into memory from the specified
+ device (raw disk initially, and eventually filesystems or network
+ devices via bootp) and transfers control.
+
+
+4. Modifying APB
+
+APB has been written with the aim of maintaining platform independence
+across all AlphaBIOS (and ARC) systems. Furthermore, all dependence
+on the ARC API has been isolated in the file "arc.c", so that porting
+to another firmware environment should not be too difficult as long as
+it provides a sufficiently complete API.
+
+Additional user commands can be incorporated through the command
+dispatch table in "cmd.c".
+
diff --git a/tools/alpha/cd/up1000/up1000.pal b/tools/alpha/cd/up1000/up1000.pal
new file mode 100644
index 000000000..a47b359f3
--- /dev/null
+++ b/tools/alpha/cd/up1000/up1000.pal
Binary files differ