- 'ACP_BAN_EXPLAIN' => 'Here you can control the banning of users by name, IP or e-mail address. These methods prevent a user reaching any part of the board. You can give a short (maximum 3000 characters) reason for the ban if you wish. This will be displayed in the admin log. The duration of a ban can also be specified. If you want the ban to end on a specific date rather than after a set time period select <span style="text-decoration: underline;">Until -&gt;</span> for the ban length and enter a date in <kbd>YYYY-MM-DD</kbd> format.',

- 'EMAIL_BAN' => 'Ban one or more e-mail addresses',

- 'EMAIL_BAN_EXCLUDE_EXPLAIN' => 'Enable this to exclude the entered e-mail address from all current bans.',

- 'EMAIL_BAN_EXPLAIN' => 'To specify more than one e-mail address enter each on a new line. To match partial addresses use * as the wildcard, e.g. <samp>*@hotmail.com</samp>, <samp>*@*.domain.tld</samp>, etc.',

- 'EMAIL_NO_BANNED' => 'No banned e-mail addresses',

- 'EMAIL_UNBAN' => 'Un-ban or un-exclude e-mails',

- 'EMAIL_UNBAN_EXPLAIN' => 'You can unban (or un-exclude) multiple e-mail addresses in one go using the appropriate combination of mouse and keyboard for your computer and browser. Excluded e-mail addresses are emphasised.',

- 'ACC_ACTIVATION_EXPLAIN' => 'This determines whether users have immediate access to the board or if confirmation is required. You can also completely disable new registrations. “Board-wide e-mail” must be enabled in order to use user or admin activation.',

- 'ACC_USER' => 'By user (e-mail verification)',

- 'ALLOW_EMAIL_REUSE' => 'Allow e-mail address re-use',

- 'ALLOW_EMAIL_REUSE_EXPLAIN' => 'Different users can register with the same e-mail address.',

- 'LDAP_EMAIL' => 'LDAP e-mail attribute',

- 'LDAP_EMAIL_EXPLAIN' => 'Set this to the name of your user entry e-mail attribute (if one exists) in order to automatically set the e-mail address for new users. Leaving this empty results in empty e-mail address for users who log in for the first time.',

- 'LDAP_NO_EMAIL' => 'The specified e-mail attribute does not exist.',

- 'ACP_SERVER_SETTINGS_EXPLAIN' => 'Here you define server and domain dependant settings. Please ensure the data you enter is accurate, errors will result in e-mails containing incorrect information. When entering the domain name remember it does include http:// or other protocol term. Only alter the port number if you know your server uses a different value, port 80 is correct in most cases.',

- 'EMAIL_CHECK_MX' => 'Check e-mail domain for valid MX record',

- 'EMAIL_CHECK_MX_EXPLAIN' => 'If enabled, the e-mail domain provided on registration and profile changes is checked for a valid MX record.',

- 'ACP_EMAIL_SETTINGS_EXPLAIN' => 'This information is used when the board sends e-mails to your users. Please ensure the e-mail address you specify is valid, any bounced or undeliverable messages will likely be sent to that address. If your host does not provide a native (PHP based) e-mail service you can instead send messages directly using SMTP. This requires the address of an appropriate server (ask your provider if necessary). If the server requires authentication (and only if it does) enter the necessary username, password and authentication method.',

-

- 'ADMIN_EMAIL' => 'Return e-mail address',

- 'ADMIN_EMAIL_EXPLAIN' => 'This will be used as the return address on all e-mails, the technical contact e-mail address. It will always be used as the <samp>Return-Path</samp> and <samp>Sender</samp> address in e-mails.',

- 'BOARD_EMAIL_FORM' => 'Users send e-mail via board',

- 'BOARD_EMAIL_FORM_EXPLAIN' => 'Instead of showing the users e-mail address users are able to send e-mails via the board.',

- 'BOARD_HIDE_EMAILS' => 'Hide e-mail addresses',

- 'BOARD_HIDE_EMAILS_EXPLAIN' => 'This function keeps e-mail addresses completely private.',

- 'CONTACT_EMAIL' => 'Contact e-mail address',

- 'CONTACT_EMAIL_EXPLAIN' => 'This address will be used whenever a specific contact point is needed, e.g. spam, error output, etc. It will always be used as the <samp>From</samp> and <samp>Reply-To</samp> address in e-mails.',

- 'EMAIL_FUNCTION_NAME' => 'E-mail function name',

- 'EMAIL_FUNCTION_NAME_EXPLAIN' => 'The e-mail function used to send mails through PHP.',

- 'EMAIL_PACKAGE_SIZE' => 'E-mail package size',

- 'EMAIL_PACKAGE_SIZE_EXPLAIN' => 'This is the number of maximum e-mails sent out in one package. This setting is applied to the internal message queue; set this value to 0 if you have problems with non-delivered notification e-mails.',

- 'EMAIL_SIG' => 'E-mail signature',

- 'EMAIL_SIG_EXPLAIN' => 'This text will be attached to all e-mails the board sends.',

- 'ENABLE_EMAIL' => 'Enable board-wide e-mails',

- 'ENABLE_EMAIL_EXPLAIN' => 'If this is set to disabled no e-mails will be sent by the board at all. <em>Note the user and admin account activation settings require this setting to be enabled. If currently using “user” or “admin” activation in the activation settings, disabling this setting will require no activation of new accounts.</em>',

- 'USE_SMTP' => 'Use SMTP server for e-mail',

- 'USE_SMTP_EXPLAIN' => 'Select “Yes” if you want or have to send e-mail via a named server instead of the local mail function.',

- 'ACP_BAN_EMAILS' => 'Ban e-mails',

- 'ACP_EMAIL_SETTINGS' => 'E-mail settings',

- 'ACP_MASS_EMAIL' => 'Mass e-mail',

- 'NO_EMAILS_DEFINED' => 'No valid e-mail addresses found.',

- 'ACP_CRITICAL_LOGS_EXPLAIN' => 'This lists the actions carried out by the board itself. This log provides you with information you are able to use for solving specific problems, for example non-delivery of e-mails. You can sort by username, date, IP or action. If you have appropriate permissions you can also clear individual operations or the log as a whole.',

- 'INACTIVE_USERS_EXPLAIN' => 'This is a list of users who have registered but whose accounts are inactive. You can activate, delete or remind (by sending an e-mail) these users if you wish.',

- 'INACTIVE_USERS_EXPLAIN_INDEX' => 'This is a list of the last 10 registered users who have inactive accounts. Accounts are inactive either because account activation was enabled in user registration settings and these users’ accounts have not yet been activated, or because these accounts have been deactivated. A full list is available by following the link below from where you can activate, delete or remind (by sending an e-mail) these users if you wish.',

- 'LOG_BAN_EXCLUDE_EMAIL' => '<strong>Excluded e-mail from ban</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_BAN_EMAIL' => '<strong>Banned e-mail</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_UNBAN_EMAIL' => '<strong>Unbanned e-mail</strong><br />» %s',

- 'LOG_CONFIG_EMAIL' => '<strong>Altered e-mail settings</strong>',

- 'LOG_ERROR_EMAIL' => '<strong>E-mail error</strong><br />» %s',

- 'LOG_INACTIVE_REMIND' => '<strong>Sent reminder e-mails to inactive users</strong><br />» %s',

- 'LOG_MASS_EMAIL' => '<strong>Sent mass e-mail</strong><br />» %s',

- 'LOG_USER_BAN_EMAIL' => '<strong>Banned e-mail via user management</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_USER_UPDATE_EMAIL' => '<strong>User “%1$s” changed e-mail</strong><br />» from “%2$s” to “%3$s”',

- 'ACP_MASS_EMAIL_EXPLAIN' => 'Here you can e-mail a message to either all of your users or all users of a specific group <strong>having the option to receive mass e-mails enabled</strong>. To achieve this an e-mail will be sent out to the administrative e-mail address supplied, with a blind carbon copy sent to all recipients. The default setting is to only include 50 recipients in such an e-mail, for more recipients more e-mails will be sent. If you are emailing a large group of people please be patient after submitting and do not stop the page halfway through. It is normal for a mass emailing to take a long time, you will be notified when the script has completed.',

- 'EMAIL_SEND_ERROR' => 'There were one or more errors while sending the e-mail. Please check the %sError log%s for detailed error messages.',

- 'MAIL_BANNED_EXPLAIN' => 'When sending a mass e-mail to a group you can select here whether banned users will also receive the e-mail.',

- 'EMAIL_FILES' => 'E-mail templates',

- 'ROLE_DESCRIPTION_USER_LIMITED' => 'Can access some of the user features. Attachments, e-mails, or instant messages are not allowed.',

- 'acl_u_chgemail' => array('lang' => 'Can change e-mail address', 'cat' => 'profile'),

- 'acl_u_pm_emailpm' => array('lang' => 'Can e-mail private messages', 'cat' => 'pm'),

- 'acl_u_sendemail' => array('lang' => 'Can send e-mails', 'cat' => 'misc'),

- 'acl_f_email' => array('lang' => 'Can e-mail topics', 'cat' => 'actions'),

- 'acl_a_email' => array('lang' => 'Can send mass e-mail', 'cat' => 'misc'),

- 'EMAIL' => 'A valid e-mail address',

- 'IMG_ICON_CONTACT_EMAIL' => 'Send e-mail',

-

- 'CONFIRM_EMAIL_EXPLAIN' => 'You only need to specify this if you are changing the users e-mail address.',

- 'USER_ADMIN_BAN_EMAIL' => 'Ban by e-mail',

- 'USER_ADMIN_BAN_EMAIL_REASON' => 'E-mail address banned via user management',

- 'BAN_TRIGGERED_BY_EMAIL'=> 'A ban has been issued on your e-mail address.',

- 'EMAIL' => 'E-mail', // Short form for EMAIL_ADDRESS

- 'EMAIL_ADDRESS' => 'E-mail address',

- 'EMAIL_SMTP_ERROR_RESPONSE' => 'Ran into problems sending e-mail at <strong>Line %1$s</strong>. Response: %2$s.',

- 'INVALID_EMAIL_LOG' => '<strong>%s</strong> possibly an invalid e-mail address?',

- 'NO_EMAIL_MESSAGE' => 'E-mail message was blank.',

- 'NO_EMAIL_SUBJECT' => 'No e-mail subject specified.',

- 'RESEND_ACTIVATION' => 'Resend activation e-mail',

- 'SEND_EMAIL' => 'E-mail', // Used for submit buttons

- 'SEND_EMAIL_USER' => 'E-mail', // Used as: {L_SEND_EMAIL_USER} {USERNAME} -> E-mail UserX

-

- 'TOO_LONG_EMAIL' => 'The e-mail address you entered is too long.',

- 'TOO_SHORT_EMAIL' => 'The e-mail address you entered is too short.',

-

-The following is an e-mail sent to you by an administrator of "{SITENAME}". If this message is spam, contains abusive or other comments you find offensive please contact the webmaster of the board at the following address:

-Include this full e-mail (particularly the headers).

-Please keep this e-mail for your records. Your account information is as follows:

-E-mail: {EMAIL_ADDRESS}

-E-mail: {EMAIL_ADDRESS}

-Subject: "{SITENAME}" - E-mail a friend

-This e-mail was sent from "{SITENAME}" by {FROM_USERNAME} who thought you may be interested in the following topic:

-A message from {FROM_USERNAME} may also be included below. Please note that this message has not been seen or approved by the board administrators. If you wish to complain about having received this e-mail please contact the board administrator at {BOARD_CONTACT}. Please quote the message headers when contacting this address.

-This e-mail contains important information regarding your installation and should be kept for reference. Your password has been securely stored in our database and cannot be retrieved. In the event that it is forgotten, you will be able to reset it using the email address associated with your account.

-The following is an e-mail sent to you by {FROM_USERNAME} via your account on "{SITENAME}". If this message is spam, contains abusive or other comments you find offensive please contact the webmaster of the board at the following address:

-Include this full e-mail (particularly the headers). Please note that the reply address to this e-mail has been set to that of {FROM_USERNAME}.

-Please keep this e-mail for your records. Your account information is as follows:

-Please keep this e-mail for your records. Your account information is as follows:

-Please keep this e-mail for your records. Your account information is as follows:

-Please keep this e-mail for your records. Your account information is as follows:

- 1 => 'phpBB BBCode supports a number of ways of creating URIs (Uniform Resource Indicators) better known as URLs.<ul><li>The first of these uses the <strong>[url=][/url]</strong> tag, whatever you type after the = sign will cause the contents of that tag to act as a URL. For example to link to phpBB.com you could use:<br /><br /><strong>[url=http://www.phpbb.com/]</strong>Visit phpBB!<strong>[/url]</strong><br /><br />This would generate the following link, <a href="http://www.phpbb.com/">Visit phpBB!</a> Please notice that the link opens in the same window or a new window depending on the users browser preferences.</li><li>If you want the URL itself displayed as the link you can do this by simply using:<br /><br /><strong>[url]</strong>http://www.phpbb.com/<strong>[/url]</strong><br /><br />This would generate the following link, <a href="http://www.phpbb.com/">http://www.phpbb.com/</a></li><li>Additionally, phpBB features something called <i>Magic Links</i>, this will turn any syntactically correct URL into a link without you needing to specify any tags or even the leading http://. For example typing www.phpbb.com into your message will automatically lead to <a href="http://www.phpbb.com/">www.phpbb.com</a> being output when you view the message.</li><li>The same thing applies equally to e-mail addresses, you can either specify an address explicitly for example:<br /><br /><strong>[email]</strong>no.one@domain.adr<strong>[/email]</strong><br /><br />which will output <a href="mailto:no.one@domain.adr">no.one@domain.adr</a> or you can just type no.one@domain.adr into your message and it will be automatically converted when you view.</li></ul>As with all the BBCode tags you can wrap URLs around any of the other tags such as <strong>[img][/img]</strong> (see next entry), <strong>[b][/b]</strong>, etc. As with the formatting tags it is up to you to ensure the correct open and close order is following, for example:<br /><br /><strong>[url=http://www.google.com/][img]</strong>http://www.google.com/intl/en_ALL/images/logo.gif<strong>[/url][/img]</strong><br /><br />is <span style="text-decoration: underline">not</span> correct which may lead to your post being deleted so take care.'

- 1 => 'First, check your username and password. If they are correct, then one of two things may have happened. If COPPA support is enabled and you specified being under 13 years old during registration, you will have to follow the instructions you received. Some boards will also require new registrations to be activated, either by yourself or by an administrator before you can logon; this information was present during registration. If you were sent an e-mail, follow the instructions. If you did not receive an e-mail, you may have provided an incorrect e-mail address or the e-mail may have been picked up by a spam filer. If you are sure the e-mail address you provided is correct, try contacting an administrator.'

- 0 => 'When I click the e-mail link for a user it asks me to login?',

- 1 => 'Only registered users can send e-mail to other users via the built-in e-mail form, and only if the administrator has enabled this feature. This is to prevent malicious use of the e-mail system by anonymous users.'

- 0 => 'I have received a spamming or abusive e-mail from someone on this board!',

- 1 => 'We are sorry to hear that. The e-mail form feature of this board includes safeguards to try and track users who send such posts, so e-mail the board administrator with a full copy of the e-mail you received. It is very important that this includes the headers that contain the details of the user that sent the e-mail. The board administrator can then take action.'

- 1 => 'Any of the administrators listed on the “The team” page should be an appropriate point of contact for your complaints. If this still gets no response then you should contact the owner of the domain (do a <a href="http://www.google.com/search?q=whois">whois lookup</a>) or, if this is running on a free service (e.g. Yahoo!, free.fr, f2s.com, etc.), the management or abuse department of that service. Please note that the phpBB Group has <strong>absolutely no jurisdiction</strong> and cannot in any way be held liable over how, where or by whom this board is used. Do not contact the phpBB Group in relation to any legal (cease and desist, liable, defamatory comment, etc.) matter <strong>not directly related</strong> to the phpBB.com website or the discrete software of phpBB itself. If you do e-mail phpBB Group <strong>about any third party</strong> use of this software then you should expect a terse response or no response at all.'

- 'INST_ERR_EMAIL_INVALID' => 'The e-mail address you entered is invalid.',

- 'INST_ERR_EMAIL_MISMATCH' => 'The e-mails you entered did not match.',

- 'MCP_BAN_EMAILS' => 'Ban e-mails',

- 'CC_EMAIL' => 'Send a copy of this e-mail to yourself.',

- 'EMAIL_BODY_EXPLAIN' => 'This message will be sent as plain text, do not include any HTML or BBCode. The return address for this message will be set to your e-mail address.',

- 'EMAIL_DISABLED' => 'Sorry but all e-mail related functions have been disabled.',

- 'EMAIL_SENT' => 'The e-mail has been sent.',

- 'EMAIL_TOPIC_EXPLAIN' => 'This message will be sent as plain text, do not include any HTML or BBCode. Please note that the topic information is already included in the message. The return address for this message will be set to your e-mail address.',

- 'EMPTY_ADDRESS_EMAIL' => 'You must provide a valid e-mail address for the recipient.',

- 'EMPTY_SUBJECT_EMAIL' => 'You must specify a subject for the e-mail.',

- 'FLOOD_EMAIL_LIMIT' => 'You cannot send another e-mail at this time. Please try again later.',

- 'NO_EMAIL' => 'You are not permitted to send e-mail to this user.',

- 'SORT_EMAIL' => 'E-mail',

- Your account will at a bare minimum contain a uniquely identifiable name (hereinafter “your user name”), a personal password used for logging into your account (hereinafter “your password”) and a personal, valid e-mail address (hereinafter “your e-mail”). Your information for your account at “%1$s” is protected by data-protection laws applicable in the country that hosts us. Any information beyond your user name, your password, and your e-mail address required by “%1$s” during the registration process is either mandatory or optional, at the discretion of “%1$s”. In all cases, you have the option of what information in your account is publicly displayed. Furthermore, within your account, you have the option to opt-in or opt-out of automatically generated e-mails from the phpBB software.<br />

- Your password is ciphered (a one-way hash) so that it is secure. However, it is recommended that you do not reuse the same password across a number of different websites. Your password is the means of accessing your account at “%1$s”, so please guard it carefully and under no circumstance will anyone affiliated with “%1$s”, phpBB or another 3rd party, legitimately ask you for your password. Should you forget your password for your account, you can use the “I forgot my password” feature provided by the phpBB software. This process will ask you to submit your user name and your e-mail, then the phpBB software will generate a new password to reclaim your account.<br />

- 'ACCOUNT_COPPA' => 'Your account has been created but has to be approved, please check your e-mail for details.',

- 'ACCOUNT_EMAIL_CHANGED' => 'Your account has been updated. However, this board requires account reactivation on e-mail changes. An activation key has been sent to the new e-mail address you provided. Please check your e-mail for further information.',

- 'ACCOUNT_EMAIL_CHANGED_ADMIN' => 'Your account has been updated. However, this board requires account reactivation by the administrators on e-mail changes. An e-mail has been sent to them and you will be informed when your account has been reactivated.',

- 'ACCOUNT_INACTIVE' => 'Your account has been created. However, this board requires account activation, an activation key has been sent to the e-mail address you provided. Please check your e-mail for further information.',

- 'ACCOUNT_INACTIVE_ADMIN' => 'Your account has been created. However, this board requires account activation by the administrator group. An e-mail has been sent to them and you will be informed when your account has been activated.',

- 'ACTIVATION_EMAIL_SENT' => 'The activation e-mail has been sent to your e-mail address.',

- 'ACTIVATION_EMAIL_SENT_ADMIN' => 'The activation e-mail has been sent to the administrators e-mail addresses.',

- 'ADMIN_EMAIL' => 'Administrators can e-mail me information',

- 'CURRENT_PASSWORD_EXPLAIN' => 'You must confirm your current password if you wish to change it, alter your e-mail address or username.',

- 'DOMAIN_NO_MX_RECORD_EMAIL' => 'The entered e-mail domain has no valid MX record.',

- 'EMAIL_BANNED_EMAIL' => 'The e-mail address you entered is not allowed to be used.',

- 'EMAIL_INVALID_EMAIL' => 'The e-mail address you entered is invalid.',

- 'EMAIL_REMIND' => 'This must be the e-mail address associated with your account. If you have not changed this via your user control panel then it is the e-mail address you registered your account with.',

- 'EMAIL_TAKEN_EMAIL' => 'The entered e-mail address is already in use.',

- 'NOTIFY_METHOD_EMAIL' => 'E-mail only',

- 'NO_EMAIL_USER' => 'The e-mail/username information submitted could not be found.',

- 'PASSWORD_UPDATED' => 'A new password was sent to your registered e-mail address.',

- 'SHOW_EMAIL' => 'Users can contact me by e-mail',

- 'UCP_ADMIN_ACTIVATE' => 'Please note that you will need to enter a valid e-mail address before your account is activated. The administrator will review your account and if approved you will receive an e-mail at the address you specified.',

- 'UCP_EMAIL_ACTIVATE' => 'Please note that you will need to enter a valid e-mail address before your account is activated. You will receive an e-mail at the address you provide that contains an account activation link.',

- 'UCP_RESEND' => 'Send activation e-mail',

- 'EMAIL_TOPIC' => 'E-mail friend',

-