ghost

Omrežne storitve

This screen and the one for Sharing are only visible if the drakwizard package is installed. You can choose between several tools to set up different servers. Click on a link below or on “Skupna raba”to learn more.

Omrežne storitve

  1. “Nastavite DHCP”

  2. “Nastavite DNS”

  3. “Nastavite posredniški strežnik”

  4. “Nastavite čas”

  5. “Nastavitev ozadnjega programa OpenSSH”

Nastavite DHCP

drakwizard dhcp

Opomba

This tool is broken in Mageia 4 because of new naming scheme for the Net interfaces

This tool[7] can help you to set up a DHCP server. It is a component of drakwizard which should be installed before you can access to it.

Kaj je DHCP?

The Dynamic Host Configuration Protocol (DHCP) is a standardized networking protocol used on IP networks that dynamically configures IP addresses and other information that is needed for Internet communication. (From Wikipedia)

Setting up a DHCP server with drakwizard dhcp

Dobrodošli v čarovniku za nastavitev strežnika DHCP

  1. Predstavitev

    Prva stran je samo predstavitev, kliknite Naprej.

  2. Selecting Adaptor

    Choose the network interface, which is connected to the subnet, and for which DHCP will assign IP addresses, and then click Next.

  3. Select IP range

    Select the beginning and ending IP addresses of the range of IPs you want the server to offer, along with the IP of the gateway machine connecting to some place outside the local network, hopefully close to the Internet, then click Next.

  4. Povzetek

    Vzemite si trenutek za preverjanje teh možnosti, nato kliknite Naprej.

  5. Počakajte ...

    This can be fixed. Click Previous a few times and change things around.

  6. Nekaj ur kasneje ...

Kaj je narejenega?

  • Installing the package dhcp-server if needed;

  • Saving /etc/dhcpd.conf in /etc/dhcpd.conf.orig;

  • Creating a new dhcpd.conf starting from /usr/share/wizards/dhcp_wizard/scripts/dhcpd.conf.default and adding the new parameters:

    • hname

    • dns

    • net

    • ip

    • mask

    • rng1

    • rng2

    • dname

    • gateway

    • tftpserverip

    • dhcpd_interface

  • Also modifying Webmin configuration file /etc/webmin/dhcpd/config

  • Ponovni zagon dhcpd.

Nastavite DNS

drakwizard bind

This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

To orodje lahko zaženete v ukazni vrstici z ukazom drakwizard bind kot skrbnik.

Nastavite posredniški strežnik

drakwizard squid

This tool[8] can help you to set up a proxy server. It is a component of drakwizard which should be installed before you can access to it.

Kaj je posredniški strežnik?

A proxy server is a server (a computer system or an application) that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource available from a different server and the proxy server evaluates the request as a way to simplify and control its complexity. (From Wikipedia)

Setting up a proxy server with drakwizard squid

Dobrodošli v čarovniku za nastavitev posredniškega strežnika.

  1. Predstavitev

    Prva stran je samo predstavitev, kliknite Naprej.

  2. Izbor vrat posredniškega strežnika:

    Select the proxy port browsers will connect through, then click Next.

  3. Set Memory and Disk Usage

    Set memory and disk cache limits, then click Next.

  4. Select Network Access Control

    Set visibility to local network or world, then click Next.

  5. Grant Network Access

    Grant access to local networks, then click Next.

  6. Uporaba zgornje stopnje posredniškega strežnika?

    Cascade through another proxy server? If no, skip next step.

  7. Vrata in povezava URL zgornje stopnje posredniškega strežnika

    Provide upper level proxy hostname and port, then click Next.

  8. Povzetek

    Vzemite si trenutek za preverjanje teh možnosti, nato kliknite Naprej.

  9. Vključeno ob zagonu?

    Choose if the proxy server should be started during the boot time, then click Next.

  10. Zaključi

    Zaključeno! Kliknite Končano.

Kaj je narejenega?

  • Installing the package squid if needed;

  • Saving /etc/squid/squid.conf in /etc/squid/squid.conf.orig;

  • Creating a new squid.conf starting from squid.conf.default and adding the new parameters:

    • cache_dir

    • localnet

    • cache_mem

    • http_port

    • level 1, 2 or 3 and http_access according to level

    • cache_peer

    • visible_hostname

  • Ponovni zagon squid.

Nastavite čas

drakwizard ntp

This tool[9] purpose is to set the time of your server synchronised with an external server. It isn't installed by default and you have to also install the drakwizard and drakwizard-base packages.

Setup a NTP server with drakwizard ntp

  1. After a welcome screen (see above), the second one ask you to choose three time servers in the drop down lists and suggests to use pool.ntp.org twice because this server always points to available time servers.

  2. The following screens allows to choose the region and the city and then, you arrive on a summary. If something is wrong, you can obviously change it using the Previousbutton. If everything is right, click on the Next button to proceed to the test. It may take a while and you finally get this screen below:

  3. Kliknite gumb Končano za zapiranje orodja.

Kaj je narejenega?

This tool executes the following steps:

  • Installing the package ntp if needed

  • Saving the files /etc/sysconfig/clock to /etc/sysconfig/clock.orig and /etc/ntp/step-tickers to /etc/ntp/step-tickers.orig;

  • Writing a new file /etc/ntp/step-tickers with the list of servers;

  • Modifying the file /etc/ntp.conf by inserting the first server name;

  • Stopping and starting crond, atd and ntpd services;

  • Setting the hardware clock to the current system time with UTC reference.

Nastavitev ozadnjega programa OpenSSH

drakwizard sshd

This tool[10] can help you to set up an SSH daemon.

Kaj je SSH?

Secure Shell (SSH) is a cryptographic network protocol for secure data communication, remote command-line login, remote command execution, and other secure network services between two networked computers that connects, via a secure channel over an insecure network, a server and a client (running SSH server and SSH client programs, respectively). (From Wikipedia)

Setting up an SSH daemon with drakwizard sshd

Dobrodošli v čarovniku za nastavitev Open SSH

  1. Select Type of Configure Options

    Choose Expert for all options or Newbie to skip steps 3-7, click Next.

  2. Splošne možnosti

    Sets visibility and root access options. Port 22 is the standard SSH port.

  3. Metode overitve

    Allow a variety of authentication methods users can use while connecting, then click Next.

  4. Logging

    Choose logging facility and level of output, then click Next.

  5. Možnosti prijave

    Configure per-login settings, then click Next.

  6. Možnosti prijave uporabnika

    Configure the user access settings, then click Next.

  7. Compression and Forwarding

    Configure X11 forwarding and compression during transfer, then click Next.

  8. Povzetek

    Vzemite si trenutek za preverjanje teh možnosti, nato kliknite Naprej.

  9. Zaključi

    Zaključeno! Kliknite Končano.


[7] To orodje lahko zaženete v ukazni vrstici z ukazom drakwizard dhcp kot skrbnik.

[8] To orodje lahko zaženete v ukazni vrstici z ukazom drakwizard squid kot skrbnik.

[9] To orodje lahko zaženete v ukazni vrstici z ukazom drakwizard ntp kot skrbnik.

[10] To orodje lahko zaženete v ukazni vrstici z ukazom drakwizard sshd kot skrbnik.

© Mageia
CC BY-SA 3.0
Uploaded on 25/08/2023
Nazaj   Naprej
 Domov 
loading table of contents...