version 2.7.9

36 files changed, 2283 insertions, 0 deletions

diff --git a/trunk/Makefile b/trunk/Makefile
new file mode 100644
index 0000000..4d3b2c9
--- /dev/null
+++ b/trunk/Makefile
@@ -0,0 +1,59 @@
+PACKAGE = setup
+VERSION = 2.7.9
+SVNPATH = svn+ssh://svn.mandriva.com/svn/soft/$(PACKAGE)
+
+LIST =  csh.cshrc csh.login host.conf hosts.allow hosts.deny inputrc \
+	motd printcap profile.d protocols securetty services shells profile \
+	filesystems fstab resolv.conf hosts
+
+subdir = passgrp utils man
+
+FILES = $(subdir) $(LIST) Makefile ChangeLog
+
+all: 
+	@for dir in $(subdir);do \
+		make -C $$dir all ;\
+	done
+
+clean:
+	@for dir in $(subdir);do \
+		make -C $$dir clean ;\
+	done
+	rm -f *~ \#*\#
+
+install:
+	@for dir in $(subdir); do \
+		make -C $$dir install DESTDIR=$(DESTDIR);\
+	done
+	install -d -m 755 $(DESTDIR)/etc/
+	install -d -m 755 $(DESTDIR)/var/log/
+	for i in $(LIST); do \
+		cp -avf $$i $(DESTDIR)/etc/$$i; \
+	done
+	chmod 0600 $(DESTDIR)/etc/securetty
+	echo -n '' > $(DESTDIR)/var/log/lastlog
+	echo -n '' > $(DESTDIR)/etc/mtab
+
+# rules to build a local distribution
+
+localdist: cleandist dir localcopy tar
+
+cleandist: clean
+	rm -rf $(PACKAGE)-$(VERSION) $(PACKAGE)-$(VERSION).tar.bz2
+
+dir:
+	mkdir $(PACKAGE)-$(VERSION)
+
+localcopy:
+	tar c --exclude=.svn $(FILES) | tar x -C $(PACKAGE)-$(VERSION)   
+
+tar:
+	tar cvjf $(PACKAGE)-$(VERSION).tar.bz2 $(PACKAGE)-$(VERSION)
+	rm -rf $(PACKAGE)-$(VERSION)
+
+# rules to build a public distribution
+
+dist: cleandist dir localcopy tar svntag
+
+svntag:
+	svn cp -m 'version $(VERSION)' $(SVNPATH)/trunk $(SVNPATH)/tags/v$(VERSION)
diff --git a/trunk/NEWS b/trunk/NEWS
new file mode 100644
index 0000000..924c32c
--- /dev/null
+++ b/trunk/NEWS
@@ -0,0 +1,19 @@
+2007-08-11 Guillaume Rousse <guillomovitch@mandriva.org> 2.7.9
+
+	* add iprop service
+
+2007-03-09 Guillaume Rousse <guillomovitch@mandriva.org> 2.7.8
+
+	* drop exports file, it belong to nfs-utils
+
+2007-03-07 Guillaume Rousse <guillomovitch@mandriva.org> 2.7.7
+
+	* drop anything related to update-passwd, as it is not used in the
+	  package
+
+2007-03-07 Guillaume Rousse <guillomovitch@mandriva.org> 2.7.6
+
+	* remove ulimited-related directives from profile (cd bug #29157)
+	* remove deprecated /usr/X11R6/bin location from PATH in profile
+	* Makefiles cleanup
+	* switch to a manual Changelog
diff --git a/trunk/bashrc b/trunk/bashrc
new file mode 100644
index 0000000..9c50462
--- /dev/null
+++ b/trunk/bashrc
@@ -0,0 +1,39 @@
+# /etc/bashrc
+
+# System wide functions and aliases
+# Environment stuff goes in /etc/profile
+
+# by default, we want this to get set.
+# Even for non-interactive, non-login shells.
+if [ "`id -gn`" = "`id -un`" -a `id -u` -gt 99 ]; then
+	umask 002
+else
+	umask 022
+fi
+
+# are we an interactive shell?
+if [ "$PS1" ]; then
+    case $TERM in
+	xterm*)
+	    PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: ${PWD}\007"'
+	    ;;
+	*)
+	    ;;
+    esac
+    [ "$PS1" = "\\s-\\v\\\$ " ] && PS1="[\u@\h \W]\\$ "
+    
+    if [ -z "$loginsh" ]; then # We're not a login shell
+	# Not all scripts in profile.d are compatible with other shells
+	# TODO: make the scripts compatible or check the running shell by
+	# themselves.
+	if [ -n "${BASH_VERSION}${KSH_VERSION}${ZSH_VERSION}" ]; then
+            for i in /etc/profile.d/*.sh; do
+	        if [ -x $i ]; then
+	            . $i
+	        fi
+	    done
+	fi
+    fi
+fi
+
+unset loginsh
diff --git a/trunk/csh.cshrc b/trunk/csh.cshrc
new file mode 100644
index 0000000..6010599
--- /dev/null
+++ b/trunk/csh.cshrc
@@ -0,0 +1,36 @@
+# /etc/cshrc
+#
+# csh configuration for all shell invocations. Currently, a prompt.
+
+# (pixel) tcsh doesn't handle directory in the PATH being non-readable
+# in security high, /usr/bin is 751, aka non-readable
+# using unhash fixes the pb
+if (! -r /usr/bin) then
+  unhash
+endif
+
+if ( $uid == 0 ) limit coredumpsize 1000000
+
+if ($?prompt) then
+  if ($?tcsh) then
+    set prompt='[%n@%m %c]$ ' 
+  else
+    set prompt=\[`id -nu`@`hostname -s`\]\$\ 
+  endif
+endif
+
+test -d /etc/profile.d
+if ($status == 0) then
+        set nonomatch
+        foreach i ( /etc/profile.d/*.csh )
+                test -r $i
+                if ($status == 0) then
+			if ( $shlvl == 1 ) then
+				$shell -f $i && source $i || echo "/etc/csh.cshrc: error in $i"
+			else
+				source $i
+			endif
+                endif
+        end
+        unset i nonomatch
+endif
diff --git a/trunk/csh.login b/trunk/csh.login
new file mode 100644
index 0000000..564c232
--- /dev/null
+++ b/trunk/csh.login
@@ -0,0 +1,34 @@
+# /etc/csh.login
+
+# System wide environment and startup programs for csh users
+
+
+if ( ! $?PATH ) then
+	setenv PATH "/bin:/usr/bin:/usr/local/bin"
+endif
+
+# (pixel) tcsh doesn't handle directory in the PATH being non-readable
+# in security high, /usr/bin is 751, aka non-readable
+# using unhash *after modifying PATH* fixes the pb
+if (! -r /usr/bin) then
+  unhash
+endif
+
+limit coredumpsize unlimited
+
+if ( $user == $group && $uid > 14 ) then
+	umask 022
+else
+	umask 002
+endif
+
+setenv HOSTNAME `/bin/hostname`
+set history=1000
+
+if ( -f $HOME/.inputrc ) then
+	setenv INPUTRC /etc/inputrc
+endif
+
+if ( $?tcsh ) then
+	bindkey "^[[3~" delete-char
+endif
diff --git a/trunk/filesystems b/trunk/filesystems
new file mode 100644
index 0000000..102c8cd
--- /dev/null
+++ b/trunk/filesystems
@@ -0,0 +1,7 @@
+ext2
+nodev proc
+nodev devpts
+iso9660
+reiserfs
+vfat
+hpfs
diff --git a/trunk/fstab b/trunk/fstab
new file mode 100644
index 0000000..32d8e09
--- /dev/null
+++ b/trunk/fstab
@@ -0,0 +1 @@
+none /proc proc defaults 0 0
diff --git a/trunk/host.conf b/trunk/host.conf
new file mode 100644
index 0000000..1a8c1e1
--- /dev/null
+++ b/trunk/host.conf
@@ -0,0 +1,2 @@
+order hosts,bind
+multi on
diff --git a/trunk/hosts b/trunk/hosts
new file mode 100644
index 0000000..cbd8a7f
--- /dev/null
+++ b/trunk/hosts
@@ -0,0 +1 @@
+127.0.0.1               localhost
diff --git a/trunk/hosts.allow b/trunk/hosts.allow
new file mode 100644
index 0000000..4e42f07
--- /dev/null
+++ b/trunk/hosts.allow
@@ -0,0 +1,6 @@
+#
+# hosts.allow	This file describes the names of the hosts which are
+#		allowed to use the local INET services, as decided
+#		by the '/usr/sbin/tcpd' server.
+#
+
diff --git a/trunk/hosts.deny b/trunk/hosts.deny
new file mode 100644
index 0000000..ef32afc
--- /dev/null
+++ b/trunk/hosts.deny
@@ -0,0 +1,9 @@
+#
+# hosts.deny	This file describes the names of the hosts which are
+#		*not* allowed to use the local INET services, as decided
+#		by the '/usr/sbin/tcpd' server.
+#
+# The portmap line is redundant, but it is left to remind you that
+# the new secure portmap uses hosts.deny and hosts.allow.  In particular
+# you should know that NFS uses portmap!
+
diff --git a/trunk/inputrc b/trunk/inputrc
new file mode 100644
index 0000000..97bf96b
--- /dev/null
+++ b/trunk/inputrc
@@ -0,0 +1,88 @@
+## Mandriva Linux Configuration
+# (c) Mandriva 1999-2005
+# Chmouel Boudjnah, Pablo Saratxaga <pablo@mandriva.com> 
+#	$Id: inputrc 105875 2005-12-07 06:56:46Z flepied $	
+
+
+# Show all if ambigious.
+set show-all-if-ambiguous on
+
+# 8Bits supports.
+set meta-flag on
+set convert-meta off
+set input-meta on
+set output-meta on
+
+# bash completions does not use more
+set page-completions off
+
+# definition of keys in vi mode if vi mode is set at login result
+# in totally messed up command line... so it safer to activate it
+# only for emacs mode; until the bug is fixed (in libreadline?)
+$if mode=emacs
+
+# Keyboard configuration
+"[2~": yank			# Insert
+"[3~":delete-char		# Suppr
+
+"[1~": beginning-of-line	# Home
+"[4~": end-of-line		# End
+
+# typing the beginning of a previous command then
+# PgUp/PgDw cycles trough history only for matching entries
+"[5~": history-search-backward	# Previous
+"[6~": history-search-forward		# Next
+
+# those two are for rxvt
+"\e[7~":beginning-of-line
+"\e[8~":end-of-line
+
+# on some xterm
+"\e[H": beginning-of-line
+"\e[F": end-of-line
+
+# on nxterms
+"\e[\C-@": beginning-of-line
+"\e[e": end-of-line
+
+$if term=xterm
+#
+# Application keypad and cursor of xterm
+# with NumLock ON
+#
+# Operators
+"\eOo":         "/"
+"\eOj":         "*"
+"\eOm":         "-"
+"\eOk":         "+"
+"\eOl":         "+"
+"\eOM":         accept-line
+
+# Colon and dot
+# "\eOl":	","
+"\eOn":		"."
+
+# Numbers
+"\eOp":         "0"
+"\eOq":         "1"
+"\eOr":         "2"
+"\eOs":         "3"
+"\eOt":         "4"
+"\eOu":         "5"
+"\eOv":         "6"
+"\eOw":         "7"
+"\eOx":         "8"
+"\eOy":         "9"
+$endif
+
+#
+# Application keypad and cursor of xterm
+#
+"\eOD":         backward-char
+"\eOC":         forward-char
+"\eOA":         previous-history
+"\eOB":         next-history
+"\eOE":         re-read-init-file
+
+# emacs mode
+$endif
diff --git a/trunk/man/Makefile b/trunk/man/Makefile
new file mode 100644
index 0000000..47c356f
--- /dev/null
+++ b/trunk/man/Makefile
@@ -0,0 +1,13 @@
+subdir = cs et eu fr it nl uk
+mandir = /usr/share/man
+
+all: 
+
+clean:
+
+install:
+	@for dir in $(subdir); do \
+		install -d $(DESTDIR)$(mandir)/$$dir/man8; \
+		install -m 644 $$dir/*.8 $(DESTDIR)$(mandir)/$$dir/man8; \
+	done
+
diff --git a/trunk/man/cs/run-parts.8 b/trunk/man/cs/run-parts.8
new file mode 100644
index 0000000..a6cba7a
--- /dev/null
+++ b/trunk/man/cs/run-parts.8
@@ -0,0 +1,78 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5. Červen 1996" "Debian Linux"
+.SH NÁZEV
+run\-parts \- spustí skripty nebo programy z adresáře
+.SH SYNAPSE
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] adresář
+.SH POPIS
+.PP
+.B run\-parts
+spustí několik skriptů nebo programů, které se nacházejí v jednom adresáři
+.IR adresář .
+Názvy souborů by se měly skládat pouze z velkých a malých písmen, číslic, podtržítka
+a pomlček. Podadresáře 
+.I adresáře
+a soubory s jinými názvy budou tiše ignorovány.
+
+Skripty musí dodržovat konvenci
+.B #!/bin/interpretername ,
+jinak nebudou spuštěny. Skripty nebudou automaticky spuštěny příkazem
+.B /bin/sh.
+
+Nalezené soubory budou spuštěny v lexikálním pořadí svých názvů.
+.SS VOLBY
+.TP
+.B \-\-test
+vypíše názvy skriptů, které by byly spuštěny, ale tyto skripty nespustí
+.TP
+.B \-\-verbose
+vypíše před jejich spuštěním název každého skriptu na standardní chybový výstup.
+.TP
+.B \-\-report
+podobná volbě
+.BR \-\-verbose ,
+pouze s tím rozdílem, že vypíše pouze názvy skriptů, které vyprodukovaly nějaký výstup. Název skriptu je vypsán na standardní výstup nebo na standardní chybový výstup, záleží na skriptu, na který výstup vyprodukuje výstup první.
+.B
+.TP
+.BI \-\-umask= umask
+Nastaví masku umask na
+.I umask
+před spuštěním skriptu. Maska
+.I umask
+by měla být zadána v osmičkovém tvaru. Výchozí hodnota masky umask je nastavena na 022.
+.TP
+.BI \-\-arg= argument
+Předá skriptům
+.I argument .
+Použijte 
+.B --arg
+pro každý parametr, který chcete předat.
+.TP
+.B "\-\-"
+Znamená ukončení voleb. Každý název souboru uvedený po znacích
+.B "\-\-"
+nebude pokládán za volbu, i pokud by začínal pomlčkami.
+.TP
+.B \-\-help
+Zobrazí informace nápovědy a ukončí se.
+.TP
+.B \-\-version
+Zobrazí verzi a informace o autorských právech a ukončí se.
+
+.SH COPYRIGHT
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996, 1997, 1998 Guy Maor
+
+.B run\-parts
+je volně šiřitelný software; viz licence GNU General Public Licence verze 2 nebo
+pozdější s podmínkami pro kopírování.  Je dodáván bez 
+.I jakýchkoli
+záruk.
diff --git a/trunk/man/et/run-parts.8 b/trunk/man/et/run-parts.8
new file mode 100644
index 0000000..91bb8ea
--- /dev/null
+++ b/trunk/man/et/run-parts.8
@@ -0,0 +1,82 @@
+.\" Hei, Emacs!  See on -*- nroff -*- lähtetekstifail.
+.\" Build-from-directory ja selle manuaalilehekülje autoriõigus: 1994, Ian Jackson.
+.\" Manuaalilehekülgede muudatuste autoriõigus: 1996, Jeff Noxon.
+.\" Rohkem
+.\" 
+.\" See on vaba tarkvara, kopeerimistingimuste kohta vaadake GNU Üldist Avalikku Litsentsi, versioon 2 või hilisem. Sellega ei kaasne MINGIT garantiid.
+.TH "RUN\-PARTS" "8" "5. juuni 1996" "Debian Linux" ""
+.SH "NIMI"
+run\-parts \- käivitab skripte või rakendusi kataloogis
+.SH "KOKKUVÕTE"
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] kataloog
+.SH "KIRJELDUS"
+.PP 
+.B run\-parts
+käivitab rea skripte või rakendusi, mis leiduvad konkreetses kataloogis
+.I R kataloog .
+Failinimed peavad koosnema täielikult suur\- ja väiketähtedest, numbritest, alakriipsudest ja poolituskriipsudest. 
+.I Kataloogi alamkatalooge ja muude märkidega faile vaikimisi eiratakse.
+
+Skriptid peavad käivitamiseks järgima
+.B #!/bin/interpretername
+reegleid.  Neid ei käivitata automaatselt 
+.B /bin/sh
+abil.
+
+Leitud failid käivitatakse failinimede tähestikulises järjekorras.
+.SS VÕTMED
+.TP 
+.B \-\-test
+näitab skriptide nimesid, mida käivitatakse, kuid ei käivita neid.
+.TP 
+.B \-\-verbose
+näitab enne käivitamist iga skripti nime ja edasi selgitusi.
+.TP 
+.B \-\-report
+üsna samasugune, nagu
+.BR \-\-verbose ,
+kuid näitab ainult skriptide nime, mis tekitavad väljundi.  Script's name is printed to whichever of stdout or stderr the script first produces output on.
+.B 
+.TP 
+.BI \-\-umask= umask
+Määrab umaski väärtuseks
+.I umask
+enne skriptide käivitamist.
+.I umask
+peab olema määratud kaheksandikarvuna.  Vaike\-umask on 022.
+.TP 
+.BI \-\-arg= argument
+Läkitab
+.I argumendi
+skriptidele.  Kasuta võtit
+.B \-\-arg
+kord iga argumendi kohta, mida soovid läkitada.
+.TP 
+.B "\-\-"
+Määrab, et sellega lõpevad võtmed.  Ühtegi failinime pärast võtit
+.B "\-\-"
+ei tõlgendata võtmena isegi siis, kui see algab võtmekriipsuga.
+.TP 
+.B \-\-help
+Näitab infot kasutamise kohta ja väljub.
+.TP 
+.B \-\-version
+Näitab versiooni ja autoriõigust ning väljub.
+
+.SH "AUTORIÕIGUS"
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+on vaba tarkvara; kopeerimistingimusi vaadake GNU Üldisest Avalikust Litsentsist, versioon 2 või hilisem. Sellega ei kaasne
+.I mingit
+garantiid.
+.br 
+
+
+.br 
+Tõlge eesti keelde 2002: Marek Laane
+.br 
+bald@online.ee
diff --git a/trunk/man/eu/run-parts.8 b/trunk/man/eu/run-parts.8
new file mode 100644
index 0000000..79b6334
--- /dev/null
+++ b/trunk/man/eu/run-parts.8
@@ -0,0 +1,82 @@
+.\" Kaixo Emacs!  Honako hau -*- nroff -*- iturburu-fitxategia da.
+.\" Sorrera-direktorioak eta eskuliburuko orri honek Ian Jackson-en 1994 Copyright-a dute.
+.\" Eskuliburuko orri honetako aldaketek Jeff Noxon-en 1996 Copyright-a dute.
+.\" Besterik
+.\"
+.\" Software librea da; kopiatzeko baldintzak GNU Lizentzia Publiko Orokorraren
+.\" 2. bertsioan edo berriago batean ikusi.  Ez du INOLAKO bermerik.
+.TH RUN\-PARTS 8 "1996ko ekainak 5" "Debian Linux"
+.SH IZENA
+run\-parts \- direktorio bateko programak eta script-ak exekutatzen ditu
+.SH LABURPENA
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] direktorioa
+.SH AZALPENA
+.PP
+.B run\-parts-ek
+.IR direktorio
+bakun batean aurkitutako programa edo script batzuk exekutatzen ditu.
+Fitxategi-izenek letra maiuskulak eta minuskulak,
+digituak, azpimarrak eta marratxoak baino ezin dituzte izan.  Bestelako izenak 
+dituzten .I direktorioko
+azpidirektorioei eta fitxategiei ezikusi egingo zaie isilpean.
+
+Script-ek 
+.B #!/bin/interpretername
+hitzarmena bete behar dute exekutatuak izango badira.  .B /bin/sh-ek
+ez ditu automatikoki
+exekutatuko.
+
+Aurkitutako fitxategiak fitxategi-izenen hurrenkera lexikalean exekutatuko dira.
+.SS AUKERAK
+.TP
+.B \-\-test
+exekutatuko diren script-en izenak inprimatzen ditu, baina ez ditu
+exekutatuko.
+.TP
+.B \-\-verbose
+script bakoitzaren izena errore estandarrean inprimatzen du exekutatu aurretik.
+.TP
+.B \-\-report
+.BR \-\-verbose-ren
+antzekoa da,
+baina irteera sortzen duten script-en izenak bakarrik inprimatzen ditu.  Script-a non agertzen den lehenago, irteera estandarrean edo errore estandarrean, hortxe inprimatuko da script-aren izen hori. 
+.B
+.TP
+.BI \-\-umask= umask
+umask
+.I umask-en
+ezartzen du script-ak exekutatu aurretik.
+.I umask
+zortzitarretan zehaztu behar da.  Lehenespen gisa, umask 022 izaten da.
+.TP
+.BI \-\-arg= argument
+.I argumentua
+script-etara
+pasatzen du.  .B --arg
+behin erabili
+pasatu nahi duzun argumentu bakoitzeko.
+.TP
+.B "\-\-"
+Aukeren amaiera dela zehazten du.  .B "\-\-"ren
+ondoko edozein fitxategi-izen
+ez da aukera moduan interpretatua izango, nahiz eta marratxo batez
+hasi.
+.TP
+.B \-\-help
+Erabiltzeko informazioa bistaratu eta irten egingo da.
+.TP
+.B \-\-version
+Bertsioa eta copyright-a bistaratu eta irten egingo da.
+
+.SH COPYRIGHTa
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+software librea da; kopiatzeko baldintzak GNU Lizentzia Publiko Orokorraren
+2. bertsioan edo berriago batean ikusi.  Ez du
+.I inolako
+bermerik.
+
diff --git a/trunk/man/fr/run-parts.8 b/trunk/man/fr/run-parts.8
new file mode 100644
index 0000000..23f63bf
--- /dev/null
+++ b/trunk/man/fr/run-parts.8
@@ -0,0 +1,78 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5 June 1996" "Debian Linux"
+.SH NAME
+run\-parts \- lance des scripts ou programmes dans un répertoire
+.SH SYNOPSIS
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] directory
+.SH DESCRIPTION
+.PP
+.B run\-parts
+lance un nombre de scripts ou programmes trouvés dans un seul répertoire
+.IR directory .
+Les noms de fichier doivent être constitués uniquement de caractères majuscules
+et minuscules, chiffres, soulignés, et tirets. Les sous-répertoires de
+.I directory
+et les fichiers avec d'autres noms seront ignorés silencieusement.
+
+Les scripts doivent suivre la convention
+.B #!/bin/interpretername
+afin d'être exécutés. Ils ne seront pas automatiquement lancés par
+.B /bin/sh.
+
+Les fichiers trouvés seront lancés dans l'ordre alphabétique des noms de fichiers.
+.SS OPTIONS
+.TP
+.B \-\-test
+affiche les noms des scripts à lancer, mais ne les lance pas.
+.TP
+.B \-\-verbose
+affiche le nom de chaque script vers la sortie d'erreur avant son lancement.
+.TP
+.B \-\-report
+similaire à
+.BR \-\-verbose ,
+mais n'affiche que le nom des scripts qui produisent une sortie. Le nom du script est affiché sur la sortie stdout ou stderr, selon la destination de la première écriture du script.
+.B
+.TP
+.BI \-\-umask= umask
+Donne à umask la valeur
+.I umask
+avant de lancer les scripts.
+.I umask
+doit être spécifié en octal. Par défaut, umask prend la valeur 022.
+.TP
+.BI \-\-arg= argument
+Passe
+.I argument
+aux scripts. Utilisez
+.B --arg
+pour chaque argument que vous voulez passer.
+.TP
+.B "\-\-"
+Spécifie que c'est la fin des options. Tout fichier après
+.B "\-\-"
+ne sera pas interprété comme une option même s'il commence par un tiret.
+.TP
+.B \-\-help
+Affiche la syntaxe et quitte.
+.TP
+.B \-\-version
+Affiche la version, le copyright, et quitte.
+
+.SH COPYRIGHT
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+is free software; see the GNU General Public Licence version 2 or
+later for copying conditions.  There is
+.I no
+warranty.
diff --git a/trunk/man/it/run-parts.8 b/trunk/man/it/run-parts.8
new file mode 100644
index 0000000..79ccf7f
--- /dev/null
+++ b/trunk/man/it/run-parts.8
@@ -0,0 +1,82 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5 giugno 1996" "Debian Linux"
+.SH NOME
+run\-parts \- esegue script o programmi in una directory
+.SH SINTASSI
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] directory
+.SH DESCRIZIONE
+.PP
+.B run\-parts
+esegue un gruppo di script o programmi che si trova in una singola directory
+.IR directory .
+I nomi dei file devono contenere solo lettere maiuscole e minuscole,
+numeri, sottolineature e trattini.  Sottodirectory di
+.I directory
+e file con altri nomi saranno ignorati senza avvisare.
+
+Gli script devono seguire la convenzione 
+.B #!/bin/nomeinterprete
+per essere eseguiti.  Non saranno eseguiti automaticamente da
+.B /bin/sh.
+
+I file trovati saranno eseguiti nell'ordine lessicale dei nomi dei file.
+.SS OPZIONI
+.TP
+.B \-\-test
+stampa i nomi degli script che andrebbero in esecuzione, ma senza mandarli in esecuzione realmente.
+.TP
+.B \-\-verbose
+stampa il nome di ciascuno script sullo stderr prima di eseguirlo.
+.TP
+.B \-\-report
+simile a
+.BR \-\-verbose ,
+ma stampa solo il nome dello script che produce output.  Il nome dello script viene stampato su stdout o stderr a seconda su quale dei due per primo lo script produce output.
+.B
+.TP
+.BI \-\-umask= umask
+Imposta l'umask a
+.I umask
+prima di mandare in esecuzione gli script.
+.I umask
+dovrebbe essere specificata in ottale. L'umask è pre-impostata a 022.
+.TP
+.BI \-\-arg= argomento
+Passa
+.I argomento
+agli script.  Usa
+.B --arg
+una volta per ciascun argomento che vuoi passare.
+.TP
+.B "\-\-"
+Specifica che questa è la fine delle opzioni.  Qualsiasi nome di file dopo
+.B "\-\-"
+non sarà interpretato come opzione anche se comincia con un trattino.
+.TP
+.B \-\-help
+Visualizza informazioni sull'uso ed esce.
+.TP
+.B \-\-version
+Visualizza la versione e il copyright ed esce.
+
+.SH COPYRIGHT
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+è un software libero; vedi la versione 2 della GNU General Public Licence 
+(o una successiva) per le condizioni di redistribuzione. 
+.I Non
+ci sono garanzie.
+
+.SH TRADUTTORE
+Salvatore Di Petro
+salvuz@despammed.com
diff --git a/trunk/man/nl/run-parts.8 b/trunk/man/nl/run-parts.8
new file mode 100644
index 0000000..26ba4fe
--- /dev/null
+++ b/trunk/man/nl/run-parts.8
@@ -0,0 +1,83 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5 June 1996" "Debian Linux"
+.SH NAAM
+run\-parts \- voert scripts of programma's uit in een directory
+.SH SYNOPSIS
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=parameter] [\-\-help] [\-\-version] directory
+.SH BESCHRIJVING
+.PP
+.B run\-parts
+voert een aantal scripts of programma's uit die zich in één directory 
+.IR directory
+bevinden.
+Bestandsnamen mogen uitsluitend bestaan uit hoofdletters, kleine letters, cijfers,
+onderstrepingstekens (_) en liggende streepjes (-).  Subdirectory's van
+.I directory
+en bestanden met andere namen worden stilzwijgend genegeerd.
+
+Scripts moeten zich houden aan de conventie
+.B #!/bin/interpretername
+om uitgevoerd te kunnen worden.  Ze worden niet automatisch uitgevoerd door
+.B /bin/sh.
+
+De aangetroffen bestanden worden uitgevoerd in alfabetische volgorde van de bestandsnamen.
+.SS OPTIES
+.TP
+.B \-\-test
+Toont de namen van de scripts die uitgevoerd zouden worden, echter zonder ze daadwerkelijk
+uit te voeren.
+.TP
+.B \-\-verbose
+Stuurt de naam van ieder script naar stderr alvorens het uit te voeren.
+.TP
+.B \-\-report
+Vergelijkbaar met
+.BR \-\-verbose ,
+Toont echter alleen de namen van scripts die uitvoer produceren.  De naam van het script
+wordt weergegeven via stdout of stderr, afhankelijk van waar de eerste uitvoer van het
+script naartoe wordt gestuurd.
+.B
+.TP
+.BI \-\-umask= umask
+Stelt de umask in op
+.I umask
+alvorens de scripts uit te voeren.
+.I umask
+moet hierbij in octale notatie worden opgegeven.  Het umask is standaard ingesteld op 022.
+.TP
+.BI \-\-arg= parameter
+Geef
+.I parameter
+door aan de scripts.  Gebruik telkens één optie
+.B --arg
+per parameter die u wilt doorgeven.
+.TP
+.B "\-\-"
+Geeft het einde van de serie opties aan.  Tekst na 
+.B "\-\-"
+zal niet als optie worden geïnterpreteerd, ook niet wanneer deze begint met een 
+liggend streepje (-).
+.TP
+.B \-\-help
+Toont beknopte gebruiksinformatie.
+.TP
+.B \-\-version
+Toont versie- en copyright-informatie.
+
+.SH COPYRIGHT
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+is vrije software; zie de GNU General Public Licence versie 2 of
+later voor de kopieervoorwaarden.  Er worden 
+.I geen
+garanties gegeven.
diff --git a/trunk/man/uk/run-parts.8 b/trunk/man/uk/run-parts.8
new file mode 100644
index 0000000..da30998
--- /dev/null
+++ b/trunk/man/uk/run-parts.8
@@ -0,0 +1,87 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5 June 1996" "Debian Linux"
+.SH НАЗВА
+run\-parts \- виконати скрипти чи програми в заданому каталозі
+.SH ВИКОРИСТАННЯ
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] directory
+.SH ОПИС
+.PP
+.B run\-parts
+виконує скрипти чи програми знайдені в певному каталозі
+.IR directory .
+Назви файлів повинні складатись з великих чи малих літер, цифр
+підкреслень чи дефісів. Підкаталоги каталога
+.I directory
+і файли з назвами, які не відповідають цьому правилу мовчки ігноруються.
+
+Скрипти повинні відповідати угоді на формат першого рядка
+.B #!/bin/interpretername
+для того, щоб вони виконувались.  Скрипти не будуть автоматично
+виконуватись в 
+.B /bin/sh.
+
+Знайдені файли виконуються в порядку алфавітного сортування назв файлів.
+.SS OPTIONS
+.TP
+.B \-\-test
+друкує назви скриптів, які б мали виконуватись, але не виконує їх.
+.TP
+.B \-\-verbose
+друкує назву кожного скрипту на stderr перш, ніж виконувати.
+.TP
+.B \-\-report
+подібно
+.BR \-\-verbose ,
+але тільки друкує назви скриптів, які щось друкують на екран. Назва
+скрипту друкується, якщо скрипт друкує що-небудь або на stdout, або на
+stderr.
+.B
+.TP
+.BI \-\-umask= шаблон
+Встановлює  umask рівну
+.I шаблон
+перш, ніж виконувати скрипти.
+.I шаблон
+повинен задаватись у вісімковому  форматі. Маска встановлюється в 022,
+якщо не вказано інакше.
+.TP
+.BI \-\-arg= аргумент
+Передає 
+.I аргумент
+скриптам.  Для кожного окремого аргументу, які Вам потрібно передати
+скриптам, вживайте окремий параметр
+.B --arg
+.TP
+.B "\-\-"
+Вказує на те, що це кінець всіх параметрів. Будь яка назва файла, що
+йде після
+.B "\-\-"
+не буде вважатись параметром, навіть якщо назва починається з дефіса.
+.TP
+.B \-\-help
+Друкує на екран підказку про використання і закінчує роботу.
+.TP
+.B \-\-version
+Друкує на екран інформацію про версію і авторські права і закінчує роботу.
+
+.SH АВТОРСЬКІ ПРАВА
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+це вільне програмне забезпечення; див. Загальну Публічну Ліцензію GNU
+(GPL) версії 2 чи пізнішою щодо умов розповсюдження. Гарантія 
+.I не
+надається.
+.SH
+ПЕРЕКЛАД
+.br
+Дмитро Ковальов, <kov@tokyo.emai.ne.jp>
diff --git a/trunk/motd b/trunk/motd
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/trunk/motd
diff --git a/trunk/passgrp/Makefile b/trunk/passgrp/Makefile
new file mode 100644
index 0000000..5138027
--- /dev/null
+++ b/trunk/passgrp/Makefile
@@ -0,0 +1,9 @@
+mandir = /usr/share/man
+
+all:
+
+clean:
+
+install:
+	install -D -m 644 group $(DESTDIR)/etc/group
+	install -D -m 644 passwd $(DESTDIR)/etc/passwd
diff --git a/trunk/passgrp/group b/trunk/passgrp/group
new file mode 100644
index 0000000..e0ac217
--- /dev/null
+++ b/trunk/passgrp/group
@@ -0,0 +1,26 @@
+root::0:
+bin::1:
+daemon::2:
+sys::3:
+adm::4:
+tty::5:
+disk::6:
+lp::7:
+mem::8:
+kmem::9:
+wheel::10:
+mail::12:
+news::13:
+uucp::14:
+man::15:
+floppy::19:
+games::20:
+tape::21:
+cdrom::22:
+utmp::24:
+usb::43:
+cdwriter::80:
+audio::81:
+video::82:
+users::100:
+nogroup::65534:
diff --git a/trunk/passgrp/passwd b/trunk/passgrp/passwd
new file mode 100644
index 0000000..def6408
--- /dev/null
+++ b/trunk/passgrp/passwd
@@ -0,0 +1,14 @@
+root::0:0:root:/root:/bin/bash
+bin:*:1:1:bin:/bin:/bin/sh
+daemon:*:2:2:daemon:/sbin:/bin/sh
+adm:*:3:4:adm:/var/adm:/bin/sh
+lp:*:4:7:lp:/var/spool/lpd:/bin/sh
+sync:*:5:0:sync:/sbin:/bin/sync
+shutdown:*:6:0:shutdown:/sbin:/sbin/shutdown
+halt:*:7:0:halt:/sbin:/sbin/halt
+mail:*:8:12:mail:/var/spool/mail:/bin/sh
+news:*:9:13:news:/var/spool/news:/bin/sh
+uucp:*:10:14:uucp:/var/spool/uucp:/bin/sh
+operator:*:11:0:operator:/var:/bin/sh
+games:*:12:100:games:/usr/games:/bin/sh
+nobody:*:65534:65534:Nobody:/:/bin/sh
diff --git a/trunk/printcap b/trunk/printcap
new file mode 100644
index 0000000..d48c342
--- /dev/null
+++ b/trunk/printcap
@@ -0,0 +1,8 @@
+# /etc/printcap
+#
+# Please don't edit this file directly unless you know what you are doing!
+# Be warned that the control-panel printtool requires a very strict format!
+# Look at the printcap(5) man page for more info.
+#
+# This file can be edited with the printtool in the control-panel.
+
diff --git a/trunk/profile b/trunk/profile
new file mode 100644
index 0000000..dd4af62
--- /dev/null
+++ b/trunk/profile
@@ -0,0 +1,36 @@
+# /etc/profile -*- Mode: shell-script -*- 
+# (c) MandrakeSoft, Chmouel Boudjnah <chmouel@mandrakesoft.com>
+
+loginsh=1
+
+if [ "$UID" -ge 500 ] && ! echo ${PATH} |grep -q /usr/games ; then
+    PATH=$PATH:/usr/games
+fi
+
+umask 022
+
+USER=`id -un`
+LOGNAME=$USER
+MAIL="/var/spool/mail/$USER"
+HISTCONTROL=ignoredups
+HOSTNAME=`/bin/hostname`
+HISTSIZE=1000
+
+if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then
+    INPUTRC=/etc/inputrc
+fi
+
+# some old programs still use it (eg: "man"), and it is also
+# required for level1 compliance for LI18NUX2000
+NLSPATH=/usr/share/locale/%l/%N
+
+export PATH PS1 USER LOGNAME MAIL HOSTNAME INPUTRC NLSPATH
+export HISTCONTROL HISTSIZE 
+
+for i in /etc/profile.d/*.sh ; do
+	if [ -r $i ]; then
+		. $i
+	fi
+done
+
+unset i
diff --git a/trunk/profile.d/xhost.csh b/trunk/profile.d/xhost.csh
new file mode 100755
index 0000000..948e617
--- /dev/null
+++ b/trunk/profile.d/xhost.csh
@@ -0,0 +1,11 @@
+# Export Xauthority for users not for root.
+
+if ($?DISPLAY) then
+    if (! $?SSH_TTY) then
+	if ( `id -u` >= 14 ) then
+		if (! $?XAUTHORITY) then
+			setenv XAUTHORITY $HOME/.Xauthority
+		endif
+	endif
+   endif
+endif
diff --git a/trunk/profile.d/xhost.sh b/trunk/profile.d/xhost.sh
new file mode 100755
index 0000000..04bb7ee
--- /dev/null
+++ b/trunk/profile.d/xhost.sh
@@ -0,0 +1,9 @@
+# Export Xauthority for users not for root.
+
+if [ ! -z "$DISPLAY" -a -z "$SSH_TTY" ];then
+	if [ "`id -u`" -gt 14 ];then
+		if [ -z $XAUTHORITY ];then
+		    export XAUTHORITY=$HOME/.Xauthority
+		fi
+	fi
+fi
diff --git a/trunk/protocols b/trunk/protocols
new file mode 100644
index 0000000..12272c4
--- /dev/null
+++ b/trunk/protocols
@@ -0,0 +1,148 @@
+# /etc/protocols:
+# $Id: protocols 105621 2001-05-02 17:10:04Z chmouel $
+#
+# Internet (IP) protocols
+#
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+#
+# See also http://www.isi.edu/in-notes/iana/assignments/protocol-numbers
+
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# hop-by-hop options for ipv6
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# internet group management protocol
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
+bbn-rcc	10	BBN-RCC-MON	# BBN RCC Monitoring
+nvp	11	NVP-II		# Network Voice Protocol
+pup	12	PUP		# PARC universal packet protocol
+argus	13	ARGUS		# ARGUS
+emcon	14	EMCON		# EMCON
+xnet	15	XNET		# Cross Net Debugger
+chaos	16	CHAOS		# Chaos
+udp	17	UDP		# user datagram protocol
+mux	18	MUX		# Multiplexing protocol
+dcn	19	DCN-MEAS	# DCN Measurement Subsystems
+hmp	20	HMP		# host monitoring protocol
+prm	21	PRM		# packet radio measurement protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+trunk-1	23	TRUNK-1		# Trunk-1
+trunk-2	24	TRUNK-2		# Trunk-2
+leaf-1	25	LEAF-1		# Leaf-1
+leaf-2	26	LEAF-2		# Leaf-2
+rdp	27	RDP		# "reliable datagram" protocol
+irtp	28	IRTP		# Internet Reliable Transaction Protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
+netblt	30	NETBLT		# Bulk Data Transfer Protocol
+mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
+merit-inp	32	MERIT-INP	# MERIT Internodal Protocol
+sep	33	SEP		# Sequential Exchange Protocol
+3pc	34	3PC		# Third Party Connect Protocol
+idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	38	IDPR-CMTP	# IDPR Control Message Transport Proto
+tp++	39	TP++		# TP++ Transport Protocol
+il	40	IL		# IL Transport Protocol
+ipv6	41	IPv6		# IPv6
+sdrp	42	SDRP		# Source Demand Routing Protocol
+ipv6-route	43	IPv6-Route 	# Routing Header for IPv6
+ipv6-frag	44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Resource ReSerVation Protocol
+gre	47	GRE		# Generic Routing Encapsulation
+mhrp	48	MHRP		# Mobile Host Routing Protocol
+bna	49	BNA		# BNA
+ipv6-crypt	50	IPv6-Crypt	# Encryption Header for IPv6
+ipv6-auth	51	IPv6-Auth	# Authentication Header for IPv6
+i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
+swipe	53	SWIPE		# IP with Encryption
+narp	54	NARP		# NBMA Address Resolution Protocol
+mobile	55	MOBILE		# IP Mobility
+tlsp	56	TLSP		# Transport Layer Security Protocol
+skip	57	SKIP		# SKIP
+ipv6-icmp	58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt	59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts	60	IPv6-Opts	# Destination Options for IPv6
+#	61			# any host internal protocol
+cftp	62	CFTP		# CFTP
+#	63			# any local network
+sat-expak	64	SAT-EXPAK	# SATNET and Backroom EXPAK
+kryptolan	65	KRYPTOLAN	# Kryptolan
+rvd	66	RVD		# MIT Remote Virtual Disk Protocol
+ippc	67	IPPC		# Internet Pluribus Packet Core
+#	68			# any distributed file system
+sat-mon	69	SAT-MON		# SATNET Monitoring
+visa	70	VISA		# VISA Protocol
+ipcv	71	IPCV		# Internet Packet Core Utility
+cpnx	72	CPNX		# Computer Protocol Network Executive
+cphb	73	CPHB		# Computer Protocol Heart Beat
+wsn	74	WSN		# Wang Span Network
+pvp	75	PVP		# Packet Video Protocol
+br-sat-mon	76	BR-SAT-MON	# Backroom SATNET Monitoring
+sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
+wb-mon	78	WB-MON		# WIDEBAND Monitoring
+wb-expak	79	WB-EXPAK	# WIDEBAND EXPAK
+iso-ip	80	ISO-IP		# ISO Internet Protocol
+vmtp	81	VMTP		# Versatile Message Transport
+secure-vmtp	82	SECURE-VMTP	# SECURE-VMTP
+vines	83	VINES		# VINES
+ttp	84	TTP		# TTP
+nsfnet-igp	85	NSFNET-IGP	# NSFNET-IGP
+dgp	86	DGP		# Dissimilar Gateway Protocol
+tcf	87	TCF		# TCF
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+sprite-rpc	90	Sprite-RPC	# Sprite RPC Protocol
+larp	91	LARP		# Locus Address Resolution Protocol
+mtp	92	MTP		# Multicast Transport Protocol
+ax.25	93	AX.25		# AX.25 Frames
+ipip	94	IPIP		# Yet Another IP encapsulation
+micp	95	MICP		# Mobile Internetworking Control Pro.
+scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
+#	99			# any private encryption scheme
+gmtp	100	GMTP		# GMTP
+ifmp	101	IFMP		# Ipsilon Flow Management Protocol
+pnni	102	PNNI		# PNNI over IP
+pim	103	PIM		# Protocol Independent Multicast
+aris	104	ARIS		# ARIS
+scps	105	SCPS		# SCPS
+qnx	106	QNX		# QNX
+a/n	107	A/N		# Active Networks
+ipcomp	108	IPComp		# IP Payload Compression Protocol
+snp	109	SNP		# Sitara Networks Protocol
+compaq-peer	110	Compaq-Peer	# Compaq Peer Protocol
+ipx-in-ip	111	IPX-in-IP	# IPX in IP
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+pgm	113	PGM		# PGM Reliable Transport Protocol
+#	114			# any 0-hop protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol
+ddx	116	DDX		# D-II Data Exchange
+iatp	117	IATP		# Interactive Agent Transfer Protocol
+st	118	ST		# Schedule Transfer
+srp	119	SRP		# SpectraLink Radio Protocol
+uti	120	UTI		# UTI
+smp	121	SMP		# Simple Message Protocol
+sm	122	SM		# SM
+ptp	123	PTP		# Performance Transparency Protocol
+isis	124	ISIS		# ISIS over IPv4
+fire	125	FIRE
+crtp	126	CRTP		# Combat Radio Transport Protocol
+crdup	127	CRUDP		# Combat Radio User Datagram
+sscopmce	128	SSCOPMCE
+iplt	129	IPLT
+sps	130	SPS		# Secure Packet Shield
+pipe	131	PIPE		# Private IP Encapsulation within IP
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+#	134-254			# Unassigned
+#	255			# Reserved
diff --git a/trunk/resolv.conf b/trunk/resolv.conf
new file mode 100644
index 0000000..71b6996
--- /dev/null
+++ b/trunk/resolv.conf
@@ -0,0 +1,8 @@
+# $Id: resolv.conf 105891 2006-06-02 23:25:57Z othauvin $
+# Basic resolv.conf
+
+# search domain
+
+# nameserver 127.0.0.1
+# nameserver 127.0.0.1
+# nameserver 127.0.0.1
diff --git a/trunk/securetty b/trunk/securetty
new file mode 100644
index 0000000..b232848
--- /dev/null
+++ b/trunk/securetty
@@ -0,0 +1,12 @@
+tty1
+tty2
+tty3
+tty4
+tty5
+tty6
+vc/1
+vc/2
+vc/3
+vc/4
+vc/5
+vc/6
diff --git a/trunk/services b/trunk/services
new file mode 100644
index 0000000..fedbf40
--- /dev/null
+++ b/trunk/services
@@ -0,0 +1,595 @@
+# /etc/services:
+# $Id: services 105871 2005-12-07 06:53:01Z flepied $
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
+# are included, only the more common ones.
+#
+# The latest IANA port assignments can be gotten from
+#	http://www.iana.org/assignments/port-numbers
+# The Well Known Ports are those from 0 through 1023.
+# The Registered Ports are those from 1024 through 49151
+# The Dynamic and/or Private Ports are those from 49152 through 65535
+#
+# Each line describes one service, and is of the form:
+#
+# service-name  port/protocol  [aliases ...]   [# comment]
+
+tcpmux		1/tcp				# TCP port service multiplexer
+tcpmux		1/udp				# TCP port service multiplexer
+rje		5/tcp				# Remote Job Entry
+rje		5/udp				# Remote Job Entry
+echo		7/tcp
+echo		7/udp
+discard		9/tcp		sink null
+discard		9/udp		sink null
+systat		11/tcp		users
+systat		11/udp		users
+daytime		13/tcp
+daytime		13/udp
+qotd		17/tcp		quote
+qotd		17/udp		quote
+msp		18/tcp				# message send protocol
+msp		18/udp				# message send protocol
+chargen		19/tcp		ttytst source
+chargen		19/udp		ttytst source
+ftp-data	20/tcp
+ftp-data	20/udp
+# 21 is registered to ftp, but also used by fsp
+ftp		21/tcp
+ftp		21/udp		fsp fspd
+ssh		22/tcp				# SSH Remote Login Protocol
+ssh		22/udp				# SSH Remote Login Protocol
+telnet		23/tcp
+telnet		23/udp
+# 24 - private mail system
+lmtp		24/tcp				# LMTP Mail Delivery
+lmtp		24/udp				# LMTP Mail Delivery
+smtp		25/tcp		mail
+smtp		25/udp		mail
+time		37/tcp		timserver
+time		37/udp		timserver
+rlp		39/tcp		resource	# resource location
+rlp		39/udp		resource	# resource location
+nameserver	42/tcp		name		# IEN 116
+nameserver	42/udp		name		# IEN 116
+nicname		43/tcp		whois
+nicname		43/udp		whois
+tacacs		49/tcp				# Login Host Protocol (TACACS)
+tacacs		49/udp				# Login Host Protocol (TACACS)
+re-mail-ck	50/tcp				# Remote Mail Checking Protocol
+re-mail-ck	50/udp				# Remote Mail Checking Protocol
+domain		53/tcp				# name-domain server
+domain		53/udp
+whois++		63/tcp
+whois++		63/udp
+bootps		67/tcp				# BOOTP server
+bootps		67/udp
+bootpc		68/tcp		dhcpc		# BOOTP client
+bootpc		68/udp		dhcpc
+tftp		69/tcp
+tftp		69/udp
+gopher		70/tcp				# Internet Gopher
+gopher		70/udp
+netrjs-1	71/tcp				# Remote Job Service
+netrjs-1	71/udp				# Remote Job Service
+netrjs-2	72/tcp				# Remote Job Service
+netrjs-2	72/udp				# Remote Job Service
+netrjs-3	73/tcp				# Remote Job Service
+netrjs-3	73/udp				# Remote Job Service
+netrjs-4	74/tcp				# Remote Job Service
+netrjs-4	74/udp				# Remote Job Service
+finger		79/tcp
+finger		79/udp
+http		80/tcp		www www-http	# WorldWideWeb HTTP
+http		80/udp		www www-http	# HyperText Transfer Protocol
+kerberos	88/tcp		kerberos5 krb5	# Kerberos v5
+kerberos	88/udp		kerberos5 krb5	# Kerberos v5
+supdup		95/tcp
+supdup		95/udp
+hostname	101/tcp		hostnames	# usually from sri-nic
+hostname	101/udp		hostnames	# usually from sri-nic
+iso-tsap	102/tcp		tsap		# part of ISODE.
+csnet-ns	105/tcp		cso		# also used by CSO name server
+csnet-ns	105/udp		cso
+# unfortunately the poppassd (Eudora) uses a port which has already
+# been assigned to a different service. We list the poppassd as an
+# alias here. This should work for programs asking for this service.
+# (due to a bug in inetd the 3com-tsmux line is disabled)
+#3com-tsmux	106/tcp		poppassd
+#3com-tsmux	106/udp		poppassd
+rtelnet		107/tcp				# Remote Telnet
+rtelnet		107/udp
+pop2		109/tcp		pop-2	postoffice	# POP version 2
+pop2		109/udp		pop-2
+pop3		110/tcp		pop-3		# POP version 3
+pop3		110/udp		pop-3
+sunrpc		111/tcp		portmapper	# RPC 4.0 portmapper TCP
+sunrpc		111/udp		portmapper	# RPC 4.0 portmapper UDP
+auth		113/tcp		authentication tap ident
+auth		113/udp		authentication tap ident
+sftp		115/tcp
+sftp		115/udp
+uucp-path	117/tcp
+uucp-path	117/udp
+nntp		119/tcp		readnews untp	# USENET News Transfer Protocol
+nntp		119/udp		readnews untp	# USENET News Transfer Protocol
+ntp		123/tcp
+ntp		123/udp				# Network Time Protocol
+netbios-ns	137/tcp				# NETBIOS Name Service
+netbios-ns	137/udp
+netbios-dgm	138/tcp				# NETBIOS Datagram Service
+netbios-dgm	138/udp
+netbios-ssn	139/tcp				# NETBIOS session service
+netbios-ssn	139/udp
+imap		143/tcp		imap2		# Interim Mail Access Proto v2
+imap		143/udp		imap2
+snmp		161/tcp				# Simple Net Mgmt Proto
+snmp		161/udp				# Simple Net Mgmt Proto
+snmptrap	162/udp		snmp-trap	# Traps for SNMP
+cmip-man	163/tcp				# ISO mgmt over IP (CMOT)
+cmip-man	163/udp
+cmip-agent	164/tcp
+cmip-agent	164/udp
+mailq		174/tcp				# MAILQ
+mailq		174/udp				# MAILQ
+xdmcp		177/tcp				# X Display Mgr. Control Proto
+xdmcp		177/udp
+nextstep	178/tcp		NeXTStep NextStep	# NeXTStep window
+nextstep	178/udp		NeXTStep NextStep	# server
+bgp		179/tcp				# Border Gateway Proto.
+bgp		179/udp
+prospero	191/tcp				# Cliff Neuman's Prospero
+prospero	191/udp
+irc		194/tcp				# Internet Relay Chat
+irc		194/udp
+smux		199/tcp				# SNMP Unix Multiplexer
+smux		199/udp
+at-rtmp		201/tcp				# AppleTalk routing
+at-rtmp		201/udp
+at-nbp		202/tcp				# AppleTalk name binding
+at-nbp		202/udp
+at-echo		204/tcp				# AppleTalk echo
+at-echo		204/udp
+at-zis		206/tcp				# AppleTalk zone information
+at-zis		206/udp
+qmtp		209/tcp				# Quick Mail Transfer Protocol
+qmtp		209/udp				# Quick Mail Transfer Protocol
+z39.50		210/tcp		z3950 wais	# NISO Z39.50 database
+z39.50		210/udp		z3950 wais
+ipx		213/tcp				# IPX
+ipx		213/udp
+imap3		220/tcp				# Interactive Mail Access
+imap3		220/udp				# Protocol v3
+link		245/tcp		ttylink
+link		245/udp		ttylink
+fatserv		347/tcp				# Fatmen Server
+fatserv		347/udp				# Fatmen Server
+rsvp_tunnel	363/tcp
+rsvp_tunnel	363/udp
+odmr		366/tcp				# odmr required by fetchmail
+odmr		366/udp				# odmr required by fetchmail
+rpc2portmap	369/tcp
+rpc2portmap	369/udp				# Coda portmapper
+codaauth2	370/tcp
+codaauth2	370/udp				# Coda authentication server
+ulistproc	372/tcp		ulistserv	# UNIX Listserv
+ulistproc	372/udp		ulistserv
+ldap		389/tcp
+ldap		389/udp
+svrloc		427/tcp				# Server Location Protocl
+svrloc		427/udp				# Server Location Protocl
+mobileip-agent	434/tcp
+mobileip-agent	434/udp
+mobilip-mn	435/tcp
+mobilip-mn	435/udp
+https		443/tcp				# MCom
+https		443/udp				# MCom
+snpp		444/tcp				# Simple Network Paging Protocol
+snpp		444/udp				# Simple Network Paging Protocol
+microsoft-ds	445/tcp
+microsoft-ds	445/udp
+kpasswd		464/tcp		kpwd		# Kerberos "passwd"
+kpasswd		464/udp		kpwd		# Kerberos "passwd"
+photuris	468/tcp
+photuris	468/udp
+saft		487/tcp				# Simple Asynchronous File Transfer
+saft		487/udp				# Simple Asynchronous File Transfer
+gss-http	488/tcp
+gss-http	488/udp
+pim-rp-disc	496/tcp
+pim-rp-disc	496/udp
+isakmp		500/tcp
+isakmp		500/udp
+gdomap		538/tcp				# GNUstep distributed objects
+gdomap		538/udp				# GNUstep distributed objects
+iiop		535/tcp
+iiop		535/udp
+dhcpv6-client	546/tcp
+dhcpv6-client	546/udp
+dhcpv6-server	547/tcp
+dhcpv6-server	547/udp
+rtsp		554/tcp				# Real Time Stream Control Protocol
+rtsp		554/udp				# Real Time Stream Control Protocol
+nntps		563/tcp				# NNTP over SSL
+nntps		563/udp				# NNTP over SSL
+whoami		565/tcp
+whoami		565/udp
+submission	587/tcp		msa		# mail message submission
+submission	587/udp		msa		# mail message submission
+npmp-local	610/tcp		dqs313_qmaster	# npmp-local / DQS
+npmp-local	610/udp		dqs313_qmaster	# npmp-local / DQS
+npmp-gui	611/tcp		dqs313_execd	# npmp-gui / DQS
+npmp-gui	611/udp		dqs313_execd	# npmp-gui / DQS
+hmmp-ind	612/tcp		dqs313_intercell # HMMP Indication / DQS
+hmmp-ind	612/udp		dqs313_intercell # HMMP Indication / DQS
+ipp		631/tcp				# Internet Printing Protocol
+ipp		631/udp				# Internet Printing Protocol
+ldaps		636/tcp				# LDAP over SSL
+ldaps		636/udp				# LDAP over SSL
+acap		674/tcp
+acap		674/udp
+ha-cluster	694/tcp				# Heartbeat HA-cluster
+ha-cluster	694/udp				# Heartbeat HA-cluster
+kerberos-adm	749/tcp				# Kerberos `kadmin' (v5)
+kerberos-iv	750/udp		kerberos4 kerberos-sec kdc
+kerberos-iv	750/tcp		kerberos4 kerberos-sec kdc
+webster		765/tcp				# Network dictionary
+webster		765/udp
+phonebook	767/tcp				# Network phonebook
+phonebook	767/udp
+rsync		873/tcp				# rsync
+rsync		873/udp				# rsync
+telnets		992/tcp
+telnets		992/udp
+imaps		993/tcp				# IMAP over SSL
+imaps		993/udp				# IMAP over SSL
+ircs		994/tcp
+ircs		994/udp
+pop3s		995/tcp				# POP-3 over SSL
+pop3s		995/udp				# POP-3 over SSL
+
+#
+# UNIX specific services
+#
+exec		512/tcp
+biff		512/udp		comsat
+login		513/tcp
+who		513/udp		whod
+shell		514/tcp		cmd		# no passwords used
+syslog		514/udp
+printer		515/tcp		spooler		# line printer spooler
+printer		515/udp		spooler		# line printer spooler
+talk		517/udp
+ntalk		518/udp
+utime		519/tcp		unixtime
+utime		519/udp		unixtime
+efs		520/tcp
+router		520/udp		route routed	# RIP
+ripng		521/tcp
+ripng		521/udp
+timed		525/tcp		timeserver
+timed		525/udp		timeserver
+tempo		526/tcp		newdate
+courier		530/tcp		rpc
+conference	531/tcp		chat
+netnews		532/tcp
+netwall		533/udp				# -for emergency broadcasts
+uucp		540/tcp		uucpd		# uucp daemon
+klogin		543/tcp				# Kerberized `rlogin' (v5)
+kshell		544/tcp		krcmd		# Kerberized `rsh' (v5)
+afpovertcp	548/tcp				# AFP over TCP
+afpovertcp	548/udp				# AFP over TCP
+remotefs	556/tcp		rfs_server rfs	# Brunhoff remote filesystem
+
+#
+# From ``PORT NUMBERS'':
+#
+#>REGISTERED PORT NUMBERS
+#>
+#>The Registered Ports are listed by the IANA and on most systems can be
+#>used by ordinary user processes or programs executed by ordinary
+#>users.
+#>
+#>Ports are used in the TCP [RFC793] to name the ends of logical
+#>connections which carry long term conversations.  For the purpose of
+#>providing services to unknown callers, a service contact port is
+#>defined.  This list specifies the port used by the server process as
+#>its contact port.
+#>
+#>The IANA registers uses of these ports as a convienence to the
+#>community.
+#
+# http://www.iana.org/assignments/port-numbers
+
+socks		1080/tcp			# socks proxy server
+socks		1080/udp			# socks proxy server
+mysql-cluster	1186/tcp			# MySQL Cluster Manager
+mysql-cluster	1186/udp			# MySQL Cluster Manager
+# Port 1236 is registered as `bvcontrol', but is also used by the
+# Gracilis Packeten remote config server.  The official name is listed as
+# the primary name, with the unregistered name as an alias.
+bvcontrol	1236/tcp	rmtcfg		# Daniel J. Walsh, Gracilis Packeten remote config server
+bvcontrol	1236/udp			# Daniel J. Walsh
+h323hostcallsc	1300/tcp			# H323 Host Call Secure
+h323hostcallsc	1300/udp			# H323 Host Call Secure
+ms-sql-s	1433/tcp			# Microsoft-SQL-Server
+ms-sql-s	1433/udp			# Microsoft-SQL-Server
+ms-sql-m	1434/tcp			# Microsoft-SQL-Monitor
+ms-sql-m	1434/udp			# Microsoft-SQL-Monitor
+ica		1494/tcp			# Citrix ICA Client
+ica		1494/udp			# Citrix ICA Client
+wins		1512/tcp			# Microsoft's Windows Internet Name Service
+wins		1512/udp			# Microsoft's Windows Internet Name Service
+ingreslock	1524/tcp
+ingreslock	1524/udp
+prospero-np	1525/tcp			# Prospero non-privileged
+prospero-np	1525/udp
+datametrics	1645/tcp	old-radius	# datametrics / old radius entry
+datametrics	1645/udp	old-radius	# datametrics / old radius entry
+sa-msg-port	1646/tcp	old-radacct	# sa-msg-port / old radacct entry
+sa-msg-port	1646/udp	old-radacct	# sa-msg-port / old radacct entry
+kermit		1649/tcp
+kermit		1649/udp
+l2tp		1701/tcp	l2f
+l2tp		1701/udp	l2f
+h323gatedisc	1718/tcp
+h323gatedisc	1718/udp
+h323gatestat	1719/tcp
+h323gatestat	1719/udp
+h323hostcall	1720/tcp
+h323hostcall	1720/udp
+tftp-mcast	1758/tcp
+tftp-mcast	1758/udp
+mtftp		1759/udp
+hello		1789/tcp
+hello		1789/udp
+radius		1812/tcp			# Radius
+radius		1812/udp			# Radius
+radius-acct	1813/tcp	radacct		# Radius Accounting
+radius-acct	1813/udp	radacct		# Radius Accounting
+mtp		1911/tcp			#
+mtp		1911/udp			#
+hsrp		1985/tcp			# Cisco Hot Standby Router Protocol
+hsrp		1985/udp			# Cisco Hot Standby Router Protocol
+licensedaemon	1986/tcp
+licensedaemon	1986/udp
+gdp-port	1997/tcp			# Cisco Gateway Discovery Protocol
+gdp-port	1997/udp			# Cisco Gateway Discovery Protocol
+sieve		2000/tcp			# Sieve Mail Filter Daemon
+sieve		2000/udp			# Sieve Mail Filter Daemon
+nfs		2049/tcp	nfsd
+nfs		2049/udp	nfsd
+zephyr-srv	2102/tcp			# Zephyr server
+zephyr-srv	2102/udp			# Zephyr server
+zephyr-clt	2103/tcp			# Zephyr serv-hm connection
+zephyr-clt	2103/udp			# Zephyr serv-hm connection
+zephyr-hm	2104/tcp			# Zephyr hostmanager
+zephyr-hm	2104/udp			# Zephyr hostmanager
+mysql-im	2273/tcp			# MySQL Instance Manager
+mysql-im	2273/udp			# MySQL Instance Manager
+cvspserver	2401/tcp			# CVS client/server operations
+cvspserver	2401/udp			# CVS client/server operations
+venus		2430/tcp			# codacon port
+venus		2430/udp			# Venus callback/wbc interface
+venus-se	2431/tcp			# tcp side effects
+venus-se	2431/udp			# udp sftp side effect
+codasrv		2432/tcp			# not used
+codasrv		2432/udp			# server port
+codasrv-se	2433/tcp			# tcp side effects
+codasrv-se	2433/udp			# udp sftp side effectQ
+
+# Ports numbered 2600 through 2606 are used by the zebra package without
+# being registred.  The primary names are the registered names, and the
+# unregistered names used by zebra are listed as aliases.
+hpstgmgr	2600/tcp	zebrasrv	# HPSTGMGR
+hpstgmgr	2600/udp			# HPSTGMGR
+discp-client	2601/tcp	zebra		# discp client
+discp-client	2601/udp			# discp client
+discp-server	2602/tcp	ripd		# discp server
+discp-server	2602/udp			# discp server
+servicemeter	2603/tcp	ripngd		# Service Meter
+servicemeter	2603/udp			# Service Meter
+nsc-ccs		2604/tcp	ospfd		# NSC CCS
+nsc-ccs		2604/udp			# NSC CCS
+nsc-posa	2605/tcp	bgpd		# NSC POSA
+nsc-posa	2605/udp			# NSC POSA
+netmon		2606/tcp	ospf6d		# Dell Netmon
+netmon		2606/udp			# Dell Netmon
+dict		2628/tcp			# RFC 2229
+dict		2628/udp			# RFC 2229
+corbaloc	2809/tcp			# CORBA naming service locator
+icpv2		3130/tcp			# Internet Cache Protocol V2 (Squid)
+icpv2		3130/udp			# Internet Cache Protocol V2 (Squid)
+mysql		3306/tcp			# MySQL
+mysql		3306/udp			# MySQL
+trnsprntproxy	3346/tcp			# Trnsprnt Proxy
+trnsprntproxy	3346/udp			# Trnsprnt Proxy
+nut		3493/tcp			# Network UPS Tools
+pxe		4011/udp			# PXE server
+fud		4201/udp			# Cyrus IMAP FUD Daemon
+rwhois		4321/tcp			# Remote Who Is
+rwhois		4321/udp			# Remote Who Is
+krb524		4444/tcp			# Kerberos 5 to 4 ticket xlator
+krb524		4444/udp			# Kerberos 5 to 4 ticket xlator
+iax		4569/tcp			# Inter-Asterisk eXchange
+iax		4569/udp			# Inter-Asterisk eXchange
+rfe		5002/tcp			# Radio Free Ethernet
+rfe		5002/udp			# Actually uses UDP only
+cfengine	5308/tcp			# CFengine
+cfengine	5308/udp			# CFengine
+cvsup		5999/tcp	CVSup		# CVSup file transfer/John Polstra/FreeBSD
+cvsup		5999/udp	CVSup		# CVSup file transfer/John Polstra/FreeBSD
+x11		6000/tcp	X		# the X Window System
+sane		6566/tcp			# SANE Control Port
+afs3-fileserver	7000/tcp			# file server itself
+afs3-fileserver	7000/udp			# file server itself
+afs3-callback	7001/tcp			# callbacks to cache managers
+afs3-callback	7001/udp			# callbacks to cache managers
+afs3-prserver	7002/tcp			# users & groups database
+afs3-prserver	7002/udp			# users & groups database
+afs3-vlserver	7003/tcp			# volume location database
+afs3-vlserver	7003/udp			# volume location database
+afs3-kaserver	7004/tcp			# AFS/Kerberos authentication service
+afs3-kaserver	7004/udp			# AFS/Kerberos authentication service
+afs3-volser	7005/tcp			# volume managment server
+afs3-volser	7005/udp			# volume managment server
+afs3-errors	7006/tcp			# error interpretation service
+afs3-errors	7006/udp			# error interpretation service
+afs3-bos	7007/tcp			# basic overseer process
+afs3-bos	7007/udp			# basic overseer process
+afs3-update	7008/tcp			# server-to-server updater
+afs3-update	7008/udp			# server-to-server updater
+afs3-rmtsys	7009/tcp			# remote cache manager service
+afs3-rmtsys	7009/udp			# remote cache manager service
+privoxy		8118/tcp			# privoxy junk proxy
+sd		9876/tcp			# Session Director
+sd		9876/udp			# Session Director
+amanda		10080/tcp			# amanda backup services
+amanda		10080/udp			# amanda backup services
+pgpkeyserver	11371/tcp			# PGP/GPG public keyserver
+pgpkeyserver	11371/udp			# PGP/GPG public keyserver
+h323callsigalt	11720/tcp			# H323 Call Signal Alternate
+h323callsigalt	11720/udp			# H323 Call Signal Alternate
+
+bprd		13720/tcp			# BPRD (VERITAS NetBackup)
+bprd		13720/udp			# BPRD (VERITAS NetBackup)
+bpdbm		13721/tcp			# BPDBM (VERITAS NetBackup)
+bpdbm		13721/udp			# BPDBM (VERITAS NetBackup)
+bpjava-msvc	13722/tcp			# BP Java MSVC Protocol
+bpjava-msvc	13722/udp			# BP Java MSVC Protocol
+vnetd		13724/tcp			# Veritas Network Utility
+vnetd		13724/udp			# Veritas Network Utility
+bpcd		13782/tcp			# VERITAS NetBackup
+bpcd		13782/udp			# VERITAS NetBackup
+vopied		13783/tcp			# VOPIED Protocol
+vopied		13783/udp			# VOPIED Protocol
+
+# This port is registered as wnn6, but also used under the unregistered name
+# "wnn4" by the FreeWnn package.
+wnn6		22273/tcp	wnn4
+wnn6		22273/udp	wnn4
+
+quake		26000/tcp
+quake		26000/udp
+wnn6-ds		26208/tcp
+wnn6-ds		26208/udp
+traceroute	33434/tcp
+traceroute	33434/udp
+
+#
+# Datagram Delivery Protocol services
+#
+rtmp		1/ddp				# Routing Table Maintenance Protocol
+nbp		2/ddp				# Name Binding Protocol
+echo		4/ddp				# AppleTalk Echo Protocol
+zip		6/ddp				# Zone Information Protocol
+
+#
+# Kerberos (Project Athena/MIT) services
+# Note that these are for Kerberos v4, and are unregistered/unofficial.  Sites
+# running v4 should uncomment these and comment out the v5 entries above.
+#
+kerberos_master	751/udp				# Kerberos authentication
+kerberos_master	751/tcp				# Kerberos authentication
+passwd_server	752/udp				# Kerberos passwd server
+krbupdate	760/tcp		kreg		# Kerberos registration
+kpop		1109/tcp			# Pop with Kerberos
+knetd		2053/tcp			# Kerberos de-multiplexor
+
+#
+# Kerberos 5 services, also not registered with IANA
+#
+krb5_prop	754/tcp				# Kerberos slave propagation
+eklogin		2105/tcp			# Kerberos encrypted rlogin
+
+#
+# Unregistered but necessary(?) (for NetBSD) services
+#
+supfilesrv	871/tcp				# SUP server
+supfiledbg	1127/tcp			# SUP debugging
+
+#
+# Unregistered but useful/necessary other services
+#
+netstat		15/tcp				# (was once asssigned, no more)
+linuxconf	98/tcp				# Linuxconf HTML access
+poppassd	106/tcp				# Eudora
+poppassd	106/udp				# Eudora
+smtps		465/tcp				# SMTP over SSL (TLS)
+gii		616/tcp				# gated interactive interface
+omirr		808/tcp		omirrd		# online mirror
+omirr		808/udp		omirrd		# online mirror
+swat		901/tcp				# Samba Web Administration Tool
+rndc		953/tcp				# rndc control sockets (BIND 9)
+rndc		953/udp				# rndc control sockets (BIND 9)
+skkserv		1178/tcp			# SKK Japanese input method
+rmtcfg		1236/tcp			# Gracilis Packeten remote config server
+xtel		1313/tcp			# french minitel
+support		1529/tcp	prmsd gnatsd	# GNATS, cygnus bug tracker
+cfinger		2003/tcp			# GNU Finger
+iprop		2121/tcp			# Heimdal
+ninstall	2150/tcp			# ninstall service
+ninstall	2150/udp			# ninstall service
+afbackup	2988/tcp			# Afbackup system
+afbackup	2988/udp			# Afbackup system
+squid		3128/tcp			# squid web proxy
+prsvp		3455/tcp			# RSVP Port
+prsvp		3455/udp			# RSVP Port
+distcc		3632/tcp			# distcc
+svn		3690/tcp			# Subversion
+svn		3690/udp			# Subversion
+postgres	5432/tcp			# POSTGRES
+postgres	5432/udp			# POSTGRES
+fax		4557/tcp			# FAX transmission service        (old)
+hylafax		4559/tcp			# HylaFAX client-server protocol  (new)
+xmmp		5222/tcp			# Jabber, plaintext
+xmmps		5223/tcp			# Jabber, SSL
+xmpps2s		5269/tcp			# Jabber Server-to-Server
+sgi-dgl		5232/tcp			# SGI Distributed Graphics
+sgi-dgl		5232/udp
+noclog		5354/tcp			# noclogd with TCP (nocol)
+noclog		5354/udp			# noclogd with UDP (nocol)
+hostmon		5355/tcp			# hostmon uses TCP (nocol)
+hostmon		5355/udp			# hostmon uses TCP (nocol)
+canna		5680/tcp
+x11-ssh-offset	6010/tcp			# SSH X11 forwarding offset
+ircd		6667/tcp			# Internet Relay Chat
+ircd		6667/udp			# Internet Relay Chat
+torrent		6881/tcp			# bittorrent
+xfs		7100/tcp			# X font server
+tircproxy	7666/tcp			# Tircproxy
+http-alt	8008/tcp
+http-alt	8008/udp
+webcache	8080/tcp			# WWW caching service
+webcache	8080/udp			# WWW caching service
+tproxy		8081/tcp			# Transparent Proxy
+tproxy		8081/udp			# Transparent Proxy
+jetdirect	9100/tcp	laserjet hplj	#
+mandelspawn	9359/udp	mandelbrot	# network mandelbrot
+kamanda		10081/tcp			# amanda backup services (Kerberos)
+kamanda		10081/udp			# amanda backup services (Kerberos)
+amandaidx	10082/tcp			# amanda backup services
+amidxtape	10083/tcp			# amanda backup services
+isdnlog		20011/tcp			# isdn logging system
+isdnlog		20011/udp			# isdn logging system
+vboxd		20012/tcp			# voice box system
+vboxd		20012/udp			# voice box system
+wnn4_Kr		22305/tcp			# used by the kWnn package
+wnn4_Cn		22289/tcp			# used by the cWnn package
+wnn4_Tw		22321/tcp			# used by the tWnn package
+binkp		24554/tcp			# Binkley
+binkp		24554/udp			# Binkley
+asp		27374/tcp			# Address Search Protocol
+asp		27374/udp			# Address Search Protocol
+tfido		60177/tcp			# Ifmail
+tfido		60177/udp			# Ifmail
+fido		60179/tcp			# Ifmail
+fido		60179/udp			# Ifmail
+
+# Local services
+
diff --git a/trunk/shells b/trunk/shells
new file mode 100644
index 0000000..de0249b
--- /dev/null
+++ b/trunk/shells
@@ -0,0 +1,2 @@
+/bin/sh
+/bin/bash
diff --git a/trunk/utils/Makefile b/trunk/utils/Makefile
new file mode 100644
index 0000000..f8ee2c3
--- /dev/null
+++ b/trunk/utils/Makefile
@@ -0,0 +1,13 @@
+mandir = /usr/share/man
+
+all: run-parts
+
+run-parts: run-parts.c
+	$(CC) $(CFLAGS) -o $@ $<
+
+clean:
+	rm -f run-parts *.o *~
+
+install: all
+	install -D -m 644 run-parts.8 $(DESTDIR)/$(mandir)/man8/run-parts.8
+	install -D -m 755 run-parts $(DESTDIR)/usr/bin/run-parts
diff --git a/trunk/utils/run-parts.8 b/trunk/utils/run-parts.8
new file mode 100644
index 0000000..f10be22
--- /dev/null
+++ b/trunk/utils/run-parts.8
@@ -0,0 +1,81 @@
+.\" Hey, Emacs!  This is an -*- nroff -*- source file.
+.\" Build-from-directory and this manpage are Copyright 1994 by Ian Jackson.
+.\" Changes to this manpage are Copyright 1996 by Jeff Noxon.
+.\" More
+.\"
+.\" This is free software; see the GNU General Public Licence version 2
+.\" or later for copying conditions.  There is NO warranty.
+.TH RUN\-PARTS 8 "5 June 1996" "Debian Linux"
+.SH NAME
+run\-parts \- run scripts or programs in a directory
+.SH SYNOPSIS
+.B run\-parts
+[\-\-test] [\-\-verbose] [\-\-report] [\-\-umask=umask] [\-\-arg=argument] [\-\-help] [\-\-version] directory
+.SH DESCRIPTION
+.PP
+.B run\-parts
+runs a number of scripts or programs found in a single directory
+.IR directory .
+Filenames should consist entirely of upper and
+lower case letters, digits, underscores, and hyphens.  Subdirectories of
+.I directory
+and files with other names will be silently ignored.
+
+Scripts must follow the
+.B #!/bin/interpretername
+convention in order to be executed.  They will not automatically be
+executed by
+.B /bin/sh.
+
+The files found will be run in the lexical sort order of the filenames.
+.SS OPTIONS
+.TP
+.B \-\-test
+print the names of the scripts which would be run, but don't actually run
+them.
+.TP
+.B \-\-verbose
+print the name of each script to stderr before running.
+.TP
+.B \-\-report
+similiar to
+.BR \-\-verbose ,
+but only prints the name of scripts which produce output.  The script's name is printed to whichever of stdout or stderr the script first produces output on.
+.B
+.TP
+.BI \-\-umask= umask
+Sets the umask to
+.I umask
+before running the scripts.
+.I umask
+should be specified in octal.  By default the umask is set to 022.
+.TP
+.BI \-\-arg= argument
+Pass
+.I argument
+to the scripts.  Use
+.B --arg
+once for each argument you want passed.
+.TP
+.B "\-\-"
+Specifies that this is the end of the options.  Any filename after
+.B "\-\-"
+will be not be interpreted as an option even if it starts with a
+hyphen.
+.TP
+.B \-\-help
+Display usage information and exit.
+.TP
+.B \-\-version
+Display version and copyright and exit.
+
+.SH COPYRIGHT
+Copyright (C) 1994 Ian Jackson.
+Copyright (C) 1996 Jeff Noxon.
+Copyright (C) 1996,1997,1998 Guy Maor
+
+.B run\-parts
+is free software; see the GNU General Public Licence version 2 or
+later for copying conditions.  There is
+.I no
+warranty.
diff --git a/trunk/utils/run-parts.c b/trunk/utils/run-parts.c
new file mode 100644
index 0000000..5f29a9f
--- /dev/null
+++ b/trunk/utils/run-parts.c
@@ -0,0 +1,425 @@
+/* run-parts: run a bunch of scripts in a directory
+ *
+ * Debian run-parts program
+ * Copyright (C) 1996 Jeff Noxon <jeff@router.patch.net>,
+ * Copyright (C) 1996-1999 Guy Maor <maor@debian.org>
+ *
+ * This is free software; see the GNU General Public License version 2
+ * or later for copying conditions.  There is NO warranty.
+ *
+ * Based on run-parts.pl version 0.2, Copyright (C) 1994 Ian Jackson.
+ *
+ */
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <dirent.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <string.h>
+#include <errno.h>
+#include <ctype.h>
+#include <signal.h>
+#include <sys/time.h>
+
+#define VERSION "1.15"
+
+int test_mode = 0;
+int verbose_mode = 0;
+int report_mode = 0;
+int exitstatus = 0;
+
+int argcount = 0, argsize = 0;
+char **args = 0;
+
+void error (char *format,...)
+{
+  va_list ap;
+  
+  fprintf (stderr, "run-parts: ");
+
+  va_start (ap, format);
+  vfprintf (stderr, format, ap);
+  va_end (ap);
+
+  fprintf (stderr, "\n");
+}
+
+
+static void version (void)
+{
+  fprintf (stderr, "Mandriva Linux run-parts program, version " VERSION "\n"
+		   "Copyright (C) 1994 Ian Jackson, Copyright (C) 1996 Jeff Noxon.\n"
+		   "Copyright (C) 1996,1997,1998,1999 Guy Maor\n"
+		   "This is free software; see the GNU General Public License version 2\n"
+		   "or later for copying conditions.  There is NO warranty.\n"
+		   );
+  exit (0);
+}
+
+
+static void usage (void)
+{
+  fprintf (stderr, "Usage: run-parts [OPTION]... DIRECTORY\n"
+		   "  --test          print script names which would run, but don't run them.\n"
+		   "  --verbose       print script names before running them.\n"
+		   "  --report        print script names if they produce output.\n"
+		   "  --umask=UMASK   sets umask to UMASK (octal), default is 022.\n"
+		   "  --arg=ARGUMENT  pass ARGUMENT to scripts, use once for each argument.\n"
+		   "  --version       output version information and exit.\n"
+		   "  --help          display this help and exit.\n"
+		   );
+  exit(0);
+}
+
+
+/* The octal conversion in libc is not foolproof; it will take the 8 and 9
+ * digits under some circumstances.  We'll just have to live with it.
+ */
+static void set_umask (void)
+{
+  int mask, result;
+
+  result = sscanf (optarg, "%o", &mask);
+  if ((result != 1) || (mask > 07777) || (mask < 0)) {
+    error ("bad umask value");
+    exit (1);
+  }
+
+  umask (mask);
+}
+
+/* Add an argument to the commands that we will call.  Called once for
+   every argument. */
+void add_argument (char *newarg)
+{
+  if (argcount+1 >= argsize) {
+    argsize = argsize ? argsize*2 : 4;
+    args = realloc(args, argsize * (sizeof(char*)));
+    if (!args) {
+      error("failed to reallocate memory for arguments: %s", strerror(errno));
+      exit(1);
+    }
+  }
+  args[argcount++] = newarg;
+  args[argcount] = 0;
+}
+
+/* True or false? Is this a valid filename (upper/lower alpha, digits,
+ * underscores, and hyphens only?)
+ */
+int valid_name (const struct dirent *d)
+{
+  char *c = d->d_name;
+  int filenamelen;
+  
+  filenamelen=strlen(c);
+  if( (strncmp(".rpmsave",&(c[filenamelen-8]),9)==0)
+      || (strncmp(".rpmorig",&(c[filenamelen-8]),9)==0)
+      || (strncmp(".rpmnew",&(c[filenamelen-7]),8)==0) )
+      return 0;
+
+  while (*c) {
+    if (!isalnum(*c) && *c!='_' && *c!='-' && *c!='.')
+      return 0;
+    ++c;
+  }
+  return 1;
+}
+
+
+void set_fl (int fd, int flags)
+{
+  int val;
+  if ((val = fcntl(fd, F_GETFL, 0)) < 0) {
+    error("fcntl F_GETFL: %s", strerror(errno));
+    exit(1);
+  }
+  val |= flags;
+  if (fcntl(fd, F_SETFL, val) < 0) {
+    error("fcntl F_SETFL: %s", strerror(errno));
+    exit(1);
+  }
+}
+
+
+/* We have to abort the select() call in run_part when we receive a
+ * SIGCHLD signal. We can't simply ignore it, so we do nothing.
+ */
+void catch_sigchld(int sig) {
+}
+
+
+/* Execute a file */
+void run_part (char *progname)
+{
+  int result;
+  int pid;
+  int pout[2], perr[2];
+
+  if (report_mode && (pipe(pout) || pipe(perr))) {
+    error("pipe: %s", strerror(errno));
+    exit(1);
+  }
+  if ((pid=fork()) < 0) {
+    error("failed to fork: %s", strerror(errno));
+    exit(1);
+  }
+  else if (!pid) {
+    if (report_mode) {
+      if (dup2(pout[1], STDOUT_FILENO) == -1 ||
+	  dup2(perr[1], STDERR_FILENO) == -1) {
+	error("dup2: %s", strerror(errno));
+	exit(1);
+      }
+      close(pout[0]);
+      close(perr[0]);
+      close(pout[1]);
+      close(perr[1]);
+    }
+    args[0] = progname;
+    execv (progname, args);
+    /* Try with sh */
+    if (verbose_mode) fprintf(stderr, "run-parts: executing %s with /bin/sh\n", progname);
+    execl("/bin/sh", "/bin/sh", "-c",  progname, args, (char *)0);
+    error ("failed to exec %s: %s", progname, strerror (errno));
+    exit (1);
+  }
+
+  if (report_mode) {
+    fd_set set;
+    int max, r, w, printflag, errno_select;
+    ssize_t c;
+    char buf[4096];
+    struct timeval zerotime, *timeout;
+    struct sigaction sa, sold;
+    
+    close(pout[1]);
+    close(perr[1]);
+    set_fl(pout[0], O_NONBLOCK);
+    set_fl(perr[0], O_NONBLOCK);
+    max = pout[0] > perr[0] ? pout[0]+1 : perr[0]+1;
+    printflag = 0;
+    zerotime.tv_usec = 0;
+    zerotime.tv_sec = 0;
+    timeout = NULL;
+    sigaction(SIGCHLD, NULL, &sa);
+    sa.sa_handler = catch_sigchld;
+    
+    for (;;) {
+      FD_ZERO(&set);
+      if (pout[0] >= 0) FD_SET(pout[0], &set);
+      if (perr[0] >= 0) FD_SET(perr[0], &set);
+
+      /* select() call may be interrupted by SIGCHLD */
+      sigaction(SIGCHLD, &sa, &sold);
+      r = select(max, &set, 0, 0, timeout);
+      errno_select = errno;
+      sigaction(SIGCHLD, &sold, NULL);
+
+      if (r > 0) {
+	if (pout[0] >= 0 && FD_ISSET(pout[0], &set)) {
+	  c = read(pout[0], buf, sizeof(buf));
+	  if (c > 0) {
+	    if (!printflag) {
+	      printf("%s:\n", progname);
+	      fflush(stdout);
+	      printflag = 1;
+	    }
+	    write(STDOUT_FILENO, buf, c);
+	  }
+	  else if (c == 0) {
+	    close(pout[0]);
+	    pout[0] = -1;
+	  }
+	}
+	if (perr[0] >= 0 && FD_ISSET(perr[0], &set)) {
+	  c = read(perr[0], buf, sizeof(buf));
+	  if (c > 0) {
+	    if (!printflag) {
+	      fprintf(stderr, "%s:\n", progname);
+	      fflush(stderr);
+	      printflag = 1;
+	    }
+	    write(STDERR_FILENO, buf, c);
+	  }
+	  else if (c == 0) {
+	    close(perr[0]);
+	    perr[0] = -1;
+	  }
+	}
+      }
+      else if (r < 0) {
+	/* select() was interrupted so check if we got a SIGCHLD
+	 * probably from our child (check this later).
+	 */
+	if (errno_select != EINTR) {
+	  error("select: %s", strerror(errno_select));
+	  exit(1);
+	}
+      }
+      else if (timeout == NULL) {	/* should never happen */
+	error("internal error: select() returned 0 !");
+	exit(1);
+      }
+      if (timeout == NULL) {
+        w = waitpid(pid, &result, WNOHANG);
+        if (w > 0) {
+          /* Our child has died so prepare to flush the pipes */
+          timeout = &zerotime;
+	}  
+      }
+      else {
+	if (pout[0]) close(pout[0]);
+	if (perr[0]) close(perr[0]);
+	break;
+      }
+    }
+  }
+  else {
+    waitpid(pid, &result, 0);
+  }
+  
+  if (WIFEXITED (result) && WEXITSTATUS(result)) {
+    error ("%s exited with return code %d", progname, WEXITSTATUS(result));
+    exitstatus = 1;
+  }
+  else if (WIFSIGNALED (result)) {
+    error ("%s exited because of uncaught signal %d", progname,
+	   WTERMSIG(result));
+    exitstatus = 1;
+  }
+}
+
+
+/* Find the parts to run & call run_part() */
+void run_parts (char *dirname)
+{
+  struct dirent **namelist;
+  char *filename;
+  size_t filename_length, dirname_length;
+  int entries, i, result;
+  struct stat st;
+
+  /* dirname + "/" */
+  dirname_length = strlen(dirname) + 1;
+  /* dirname + "/" + ".." + "\0" (This will save one realloc.) */
+  filename_length = dirname_length + 2 + 1;
+  if (! (filename = malloc(filename_length))) {
+    error ("failed to allocate memory for path: %s", strerror(errno));
+    exit (1);
+  }
+  strcpy (filename, dirname);
+  strcat (filename, "/");
+
+  /* scandir() isn't POSIX, but it makes things easy. */
+  entries = scandir (dirname, &namelist, valid_name, alphasort);
+  if (entries < 0) {
+    error ("failed to open directory %s: %s", dirname, strerror (errno));
+    exit (1);
+  }
+  
+  for (i = 0; i < entries; i++) {
+    if (filename_length < dirname_length + strlen(namelist[i]->d_name) + 1) {
+      filename_length = dirname_length + strlen(namelist[i]->d_name) + 1;
+      if (!(filename = realloc(filename, filename_length))) {
+	error ("failed to reallocate memory for path: %s", strerror(errno));
+	exit (1);
+      }
+    }
+    strcpy (filename + dirname_length, namelist[i]->d_name);
+
+    strcpy (filename, dirname);
+    strcat (filename, "/");
+    strcat (filename, namelist[i]->d_name);
+    
+    result = stat (filename, &st);
+    if (result < 0) {
+      error ("failed to stat component %s: %s", filename,
+	     strerror (errno));
+      exit (1);
+    }
+    if (S_ISREG(st.st_mode) && !access (filename, X_OK)) {
+      if (test_mode)
+	printf ("run-parts would run %s\n", filename);
+      else {
+	if (verbose_mode)
+	  fprintf(stderr, "run-parts: executing %s\n", filename);
+	run_part (filename);
+      }
+    }
+    else if (!S_ISDIR(st.st_mode)) {
+      printf ("run-parts: component %s is not an executable plain file\n",
+		filename);
+	exitstatus = 1;
+    }
+
+    free (namelist[i]);
+  }
+  free (namelist);
+  free (filename);
+}
+
+/* Process options */
+int main (int argc, char *argv[])
+{
+  umask (022);
+  add_argument(0);
+  
+  for (;;) {
+    int c;
+    int option_index = 0;
+
+    static struct option long_options[] = {
+      {"test", 0, &test_mode, 1},
+      {"verbose", 0, &verbose_mode, 1},
+      {"report", 0, &report_mode, 1},
+      {"umask", 1, 0, 'u'},
+      {"arg", 1, 0, 'a'},
+      {"help", 0, 0, 'h'},
+      {"version", 0, 0, 'v'},
+      {0, 0, 0, 0}
+    };
+
+    opterr = 0;
+    c = getopt_long (argc, argv, "", long_options, &option_index);
+    if (c == EOF)
+      break;
+    switch (c) {
+    case 0:
+      break;
+    case 'u':
+      set_umask ();
+      break;
+    case 'a':
+      add_argument (optarg);
+      break;
+    case 'h':
+      usage();
+      break;
+    case 'v':
+      version ();
+      break;
+    default:
+      error("unrecognized option `%s'", argv[optind-1]);
+      fprintf(stderr, "Try `run-parts --help' for more information.\n");
+      exit (1);
+    }
+  }
+  
+  /* We require exactly one argument: the directory name */
+  if (optind != (argc - 1)) {
+    error("missing operand");
+    fprintf(stderr, "Try run-parts --help' for more information.\n");
+    exit (1);
+  }
+
+  run_parts (argv[optind]);
+
+  return exitstatus;
+}