Updated POT file.

1 files changed, 110 insertions, 106 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index 2e0d6a30..2f013f9d 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -22,7 +22,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: zh_TW\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2005-12-17 20:28+0800\n"
+"POT-Creation-Date: 2005-12-23 21:41+0800\n"
 "PO-Revision-Date: 2005-12-05 20:59+0800\n"
 "Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
 "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
@@ -152,7 +152,7 @@ msgstr " (安裝用)"
 msgid "Package choice"
 msgstr "套件選擇"
 
-#: ../gurpmi2:124 ../urpmi:372
+#: ../gurpmi2:124 ../urpmi:395
 msgid "One of the following packages is needed:"
 msgstr "需要下列套件之一："
 
@@ -185,11 +185,11 @@ msgstr ""
 msgid "Package installation..."
 msgstr "套件安裝..."
 
-#: ../gurpmi2:190 ../urpmi:520
+#: ../gurpmi2:190 ../urpmi:543
 msgid "unable to get source packages, aborting"
 msgstr "無法取得原始碼套件，放棄"
 
-#: ../gurpmi2:204 ../urpmi:531
+#: ../gurpmi2:204 ../urpmi:554
 #, c-format
 msgid "Please insert the medium named \"%s\" on device [%s]"
 msgstr "請將名為 \"%s\" 的媒體置入裝置 [%s] 內"
@@ -213,7 +213,7 @@ msgstr ""
 "您要繼續安裝嗎？"
 
 #. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:255 ../gurpmi2:304 ../urpmi:603 ../urpmi:726
+#: ../gurpmi2:255 ../gurpmi2:304 ../urpmi:626 ../urpmi:749
 #, c-format
 msgid ""
 "Installation failed, some files are missing:\n"
@@ -225,7 +225,7 @@ msgstr ""
 "您或許要更新您的 urpmi 資料庫"
 
 #. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:262 ../urpme:124 ../urpmi:647
+#: ../gurpmi2:262 ../urpme:124 ../urpmi:670
 #, c-format
 msgid "removing %s"
 msgstr "正在移除 %s"
@@ -240,7 +240,7 @@ msgid "Installing package `%s' (%s/%s)..."
 msgstr "正在安裝套件 `%s' (%s/%s)..."
 
 #. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:290 ../urpmi:614 ../urpmi:668 ../urpmi:687 ../urpmi:704
+#: ../gurpmi2:290 ../urpmi:637 ../urpmi:691 ../urpmi:710 ../urpmi:727
 msgid "Installation failed"
 msgstr "安裝失敗"
 
@@ -248,7 +248,7 @@ msgstr "安裝失敗"
 msgid "_Done"
 msgstr "完成 (_D)"
 
-#: ../gurpmi2:307 ../urpmi:743
+#: ../gurpmi2:307 ../urpmi:766
 msgid "The package(s) are already installed"
 msgstr "每個套件都已經安裝了"
 
@@ -283,7 +283,7 @@ msgid "                    defaults is %s.\n"
 msgstr "                    預設為 %s。\n"
 
 #. - need to be root if binary rpms are to be installed
-#: ../rurpmi:11 ../urpmi:235
+#: ../rurpmi:11 ../urpmi:236
 msgid "Only superuser is allowed to install packages"
 msgstr "只有擁有管理者權限的使用者才能安裝套件"
 
@@ -745,7 +745,7 @@ msgid ""
 "corrupted."
 msgstr "無法為媒介 \"%s\" 建立 synthesis 檔。您的 hdlist 檔可能並不標準。"
 
-#: ../urpm.pm:1945 ../urpm.pm:1981 ../urpmi:329
+#: ../urpm.pm:1945 ../urpm.pm:1981 ../urpmi:352
 #, c-format
 msgid "built hdlist synthesis file for medium \"%s\""
 msgstr "為媒體 \"%s\" 建立 hdlist synthesis 檔"
@@ -990,28 +990,28 @@ msgstr "警告：在 MD5SUM 檔案中找不到 %s 的 md5sum"
 msgid "This operation is forbidden while running in restricted mode"
 msgstr "使用限制模式執行時禁止該操作程序"
 
-#: ../urpm/args.pm:104 ../urpm/args.pm:113
+#: ../urpm/args.pm:105 ../urpm/args.pm:114
 msgid "bad proxy declaration on command line\n"
 msgstr "命令列傳入的代理伺服器宣告錯誤\n"
 
-#: ../urpm/args.pm:223
+#: ../urpm/args.pm:224
 msgid "You need to be root to use --use-distrib"
 msgstr "您必須是 root 才能使用 --use-distrib"
 
-#: ../urpm/args.pm:255
+#: ../urpm/args.pm:256
 #, c-format
 msgid "urpmq: cannot read rpm file \"%s\"\n"
 msgstr "urpmq：無法讀取 rpm 檔案 \"%s\"\n"
 
 #. Translator: Add here the keys which might be pressed in the "No"-case.
-#: ../urpm/msg.pm:46 ../urpme:33 ../urpmi:409 ../urpmi:427 ../urpmi:462
-#: ../urpmi:509 ../urpmi:593 ../urpmi:673
+#: ../urpm/msg.pm:46 ../urpme:33 ../urpmi:432 ../urpmi:450 ../urpmi:485
+#: ../urpmi:532 ../urpmi:616 ../urpmi:696
 msgid "Nn"
 msgstr "Nn否"
 
 #. Translator: Add here the keys which might be pressed in the "Yes"-case.
-#: ../urpm/msg.pm:47 ../urpme:35 ../urpmi:410 ../urpmi:428 ../urpmi:463
-#: ../urpmi:510 ../urpmi:594 ../urpmi:674
+#: ../urpm/msg.pm:47 ../urpme:35 ../urpmi:433 ../urpmi:451 ../urpmi:486
+#: ../urpmi:533 ../urpmi:617 ../urpmi:697
 msgid "Yy"
 msgstr "Yy是"
 
@@ -1063,7 +1063,7 @@ msgid "Installation failed on node %s"
 msgstr "節點 %s 安裝失敗"
 
 #. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpm/parallel_ka_run.pm:239 ../urpm/parallel_ssh.pm:254 ../urpmi:740
+#: ../urpm/parallel_ka_run.pm:239 ../urpm/parallel_ssh.pm:254 ../urpmi:763
 msgid "Installation is possible"
 msgstr "可以安裝"
 
@@ -1138,12 +1138,12 @@ msgstr ""
 "\n"
 "使用方式：\n"
 
-#: ../urpme:43 ../urpmf:34 ../urpmi:79 ../urpmi.addmedia:44
+#: ../urpme:43 ../urpmf:34 ../urpmi:80 ../urpmi.addmedia:44
 #: ../urpmi.removemedia:50 ../urpmi.update:31 ../urpmq:44
 msgid "  --help         - print this help message.\n"
 msgstr "  --help         - 顯示此說明訊息。\n"
 
-#: ../urpme:44 ../urpmi:86
+#: ../urpme:44 ../urpmi:87
 msgid "  --auto         - automatically select a package in choices.\n"
 msgstr "  --auto         - 自動選擇套件。\n"
 
@@ -1151,12 +1151,12 @@ msgstr "  --auto         - 自動選擇套件。\n"
 msgid "  --test         - verify if the removal can be achieved correctly.\n"
 msgstr "  --test         - 確認刪除是否能夠正確進行。\n"
 
-#: ../urpme:46 ../urpmi:101 ../urpmq:63
+#: ../urpme:46 ../urpmi:102 ../urpmq:63
 msgid ""
 "  --force        - force invocation even if some packages do not exist.\n"
 msgstr "  --force        - 即使某些套件不存在仍然強制執行。\n"
 
-#: ../urpme:47 ../urpmi:106 ../urpmq:64
+#: ../urpme:47 ../urpmi:107 ../urpmq:64
 msgid "  --parallel     - distributed urpmi across machines of alias.\n"
 msgstr "  --parallel     - 在同步管理的機器上分散式的執行 urpmi。\n"
 
@@ -1164,7 +1164,7 @@ msgstr "  --parallel     - 在同步管理的機器上分散式的執行 urpmi�
 msgid "  --root         - use another root for rpm removal.\n"
 msgstr "  --root         - 使用另一個根目錄移除 rpm 套件。\n"
 
-#: ../urpme:49 ../urpmi:131
+#: ../urpme:49 ../urpmi:132
 msgid "  --noscripts    - do not execute package scriptlet(s)\n"
 msgstr "  --noscripts    - 不執行套件中的命令稿。\n"
 
@@ -1176,7 +1176,7 @@ msgstr ""
 "  --use-distrib  - 立即由一個散佈套件樹設定 urpmi，有助於安裝/反安裝一"
 "個                   藉由 --root 選項的 chroot。\n"
 
-#: ../urpme:52 ../urpmi:143 ../urpmi.addmedia:75 ../urpmi.removemedia:55
+#: ../urpme:52 ../urpmi:144 ../urpmi.addmedia:75 ../urpmi.removemedia:55
 #: ../urpmi.update:49 ../urpmq:90
 msgid "  -v             - verbose mode.\n"
 msgstr "  -v             - 完整訊息模式。\n"
@@ -1199,7 +1199,7 @@ msgid "unknown packages"
 msgstr "未知的套件"
 
 #. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpme:103 ../urpmi:445
+#: ../urpme:103 ../urpmi:468
 #, c-format
 msgid "removing package %s will break your system"
 msgstr "移除套件 %s 將破壞您的系統"
@@ -1219,7 +1219,7 @@ msgid ""
 "To satisfy dependencies, the following %d packages will be removed (%d MB)"
 msgstr "為了滿足相依性，下列 %d 個套件將被移除 (%d MB)"
 
-#: ../urpme:120 ../urpmi:464 ../urpmi:595
+#: ../urpme:120 ../urpmi:487 ../urpmi:618
 msgid " (y/N) "
 msgstr " (y/N) (是/否) "
 
@@ -1248,11 +1248,11 @@ msgstr ""
 msgid "  --version      - print this tool's version number.\n"
 msgstr "  --version      - 印出這個工具的版本編號。\n"
 
-#: ../urpmf:36 ../urpmi:124 ../urpmq:73
+#: ../urpmf:36 ../urpmi:125 ../urpmq:73
 msgid "  --env          - use specific environment (typically a bug report).\n"
 msgstr "  --env          - 使用特定環境 (一般用於臭蟲回報)。\n"
 
-#: ../urpmf:37 ../urpmi:83 ../urpmq:48
+#: ../urpmf:37 ../urpmi:84 ../urpmq:48
 msgid "  --excludemedia - do not use the given media, separated by comma.\n"
 msgstr "  --excludemedia - 不使用給定的媒體，不同媒體間請以逗號分隔。\n"
 
@@ -1261,16 +1261,16 @@ msgid ""
 "  --literal, -l  - don't match patterns, use argument as a literal string.\n"
 msgstr "  --literal, -l  - 不比對樣版，把參數當作一般字串。\n"
 
-#: ../urpmf:39 ../urpmi:81 ../urpmq:46
+#: ../urpmf:39 ../urpmi:82 ../urpmq:46
 msgid "  --media        - use only the given media, separated by comma.\n"
 msgstr "  --media        - 只使用給定的媒體，不同媒體間請以逗號分隔。\n"
 
-#: ../urpmf:40 ../urpmi:84 ../urpmq:49
+#: ../urpmf:40 ../urpmi:85 ../urpmq:49
 msgid ""
 "  --sortmedia    - sort media according to substrings separated by comma.\n"
 msgstr "  --sortmedia    - 依據子字串排序媒體，以逗號分開。\n"
 
-#: ../urpmf:41 ../urpmi:85 ../urpmq:50
+#: ../urpmf:41 ../urpmi:86 ../urpmq:50
 msgid "  --synthesis    - use the given synthesis instead of urpmi db.\n"
 msgstr "  --synthesis    - 使用指定的 synthesis 檔而非 urpmi 資料庫。\n"
 
@@ -1278,7 +1278,7 @@ msgstr "  --synthesis    - 使用指定的 synthesis 檔而非 urpmi 資料庫�
 msgid "  --uniq         - do not print identical lines twice.\n"
 msgstr "  --uniq         - 不顯示相同的訊息。\n"
 
-#: ../urpmf:43 ../urpmi:80 ../urpmq:45
+#: ../urpmf:43 ../urpmi:81 ../urpmq:45
 msgid "  --update       - use only update media.\n"
 msgstr "  --update       - 只使用更新媒體。\n"
 
@@ -1433,7 +1433,7 @@ msgstr "  -f             - 顯示版本、發行編號與平台。\n"
 msgid "Incorrect format: you may use only one multi-valued tag"
 msgstr "格式錯誤：您只能使用一個多值標籤"
 
-#: ../urpmf:173 ../urpmi:224 ../urpmq:115
+#: ../urpmf:173 ../urpmi:225 ../urpmq:115
 #, c-format
 msgid "using specific environment on %s\n"
 msgstr "正在 %s 上使用特定的環境\n"
@@ -1449,7 +1449,7 @@ msgstr ""
 msgid "You may want to use --name to search for package names.\n"
 msgstr "您或許想要使用 --name 參數來搜尋套件名稱。\n"
 
-#: ../urpmi:74
+#: ../urpmi:75
 #, c-format
 msgid ""
 "urpmi version %s\n"
@@ -1465,28 +1465,28 @@ msgstr ""
 "\n"
 "使用方式：\n"
 
-#: ../urpmi:82 ../urpmq:47
+#: ../urpmi:83 ../urpmq:47
 msgid ""
 "  --searchmedia  - use only the given media to search requested (or updated) "
 "packages.\n"
 msgstr "  --searchmedia  - 只使用指定的媒體來搜尋或升級套件。\n"
 
-#: ../urpmi:87 ../urpmq:51
+#: ../urpmi:88 ../urpmq:51
 msgid ""
 "  --auto-select  - automatically select packages to upgrade the system.\n"
 msgstr "  --auto-select  - 自動選擇要用來升級系統的套件。\n"
 
-#: ../urpmi:88
+#: ../urpmi:89
 msgid ""
 "  --no-uninstall - never ask to uninstall a package, abort the "
 "installation.\n"
 msgstr "  --no-uninstall - 絕不要求移除套件，直接中斷安裝。\n"
 
-#: ../urpmi:89
+#: ../urpmi:90
 msgid "  --no-install   - don't install packages (only download)\n"
 msgstr "  --no-install   - 不安裝套件 (只下載)。\n"
 
-#: ../urpmi:90 ../urpmq:53
+#: ../urpmi:91 ../urpmq:53
 msgid ""
 "  --keep         - keep existing packages if possible, reject requested\n"
 "                   packages that lead to removals.\n"
@@ -1494,7 +1494,7 @@ msgstr ""
 "  --keep         - 盡可能的保留現存的套件，拒絕安裝會導致移除其他套件的\n"
 "                   套件。\n"
 
-#: ../urpmi:92
+#: ../urpmi:93
 #, c-format
 msgid ""
 "  --split-level  - split in small transaction if more than given packages\n"
@@ -1505,38 +1505,38 @@ msgstr ""
 "                   分割為幾個小的安裝程序。\n"
 "                   預設值為 %d。\n"
 
-#: ../urpmi:95
+#: ../urpmi:96
 #, c-format
 msgid "  --split-length - small transaction length, default is %d.\n"
 msgstr "  --split-length - 小型安裝程序大小，預設值為 %d。\n"
 
-#: ../urpmi:96 ../urpmq:52
+#: ../urpmi:97 ../urpmq:52
 msgid "  --fuzzy        - impose fuzzy search (same as -y).\n"
 msgstr "  --fuzzy        - 加上模糊搜尋 (與 -y 相同)。\n"
 
-#: ../urpmi:97 ../urpmq:61
+#: ../urpmi:98 ../urpmq:61
 msgid "  --src          - next package is a source package (same as -s).\n"
 msgstr "  --src          - 下個套件是原始碼套件 (與 -s 相同)。\n"
 
-#: ../urpmi:98
+#: ../urpmi:99
 msgid "  --install-src  - install only source package (no binaries).\n"
 msgstr "  --install-src  - 只安裝原始碼套件 (不安裝二進位檔)。\n"
 
-#: ../urpmi:99
+#: ../urpmi:100
 msgid "  --clean        - remove rpm from cache before anything else.\n"
 msgstr "  --clean        - 在執行任何事前先由快取中移除 RPM 檔案。\n"
 
-#: ../urpmi:100
+#: ../urpmi:101
 msgid "  --noclean      - don't clean rpms from cache.\n"
 msgstr "  --noclean      - 不清除快取中的 RPM 檔案。\n"
 
-#: ../urpmi:102
+#: ../urpmi:103
 msgid ""
 "  --allow-nodeps - allow asking user to install packages without\n"
 "                   dependencies checking.\n"
 msgstr "  --allow-nodeps - 允許要求使用者不檢查相依性就安裝套件。\n"
 
-#: ../urpmi:104
+#: ../urpmi:105
 msgid ""
 "  --allow-force  - allow asking user to install packages without\n"
 "                   dependencies checking and integrity.\n"
@@ -1544,11 +1544,11 @@ msgstr ""
 "  --allow-force  - 允許要求使用者安裝套件而不檢查相依性與完整\n"
 "                   性。\n"
 
-#: ../urpmi:107
+#: ../urpmi:108
 msgid "  --root         - use another root for rpm installation.\n"
 msgstr "  --root         - 使用另一個根目錄進行 RPM 套件的安裝。\n"
 
-#: ../urpmi:108
+#: ../urpmi:109
 msgid ""
 "  --use-distrib  - configure urpmi on the fly from a distrib tree, useful\n"
 "                   to install a chroot with --root option.\n"
@@ -1556,31 +1556,31 @@ msgstr ""
 "  --use-distrib  - 由一個發行版樹即時設定 urpmi，有助於藉由 --root 選項\n"
 "                   安裝一個 chroot。\n"
 
-#: ../urpmi:110 ../urpmi.addmedia:45 ../urpmi.update:32 ../urpmq:67
+#: ../urpmi:111 ../urpmi.addmedia:45 ../urpmi.update:32 ../urpmq:67
 msgid "  --wget         - use wget to retrieve distant files.\n"
 msgstr "  --wget         - 使用 wget 擷取遠端檔案。\n"
 
-#: ../urpmi:111 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:68
+#: ../urpmi:112 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:68
 msgid "  --curl         - use curl to retrieve distant files.\n"
 msgstr "  --curl         - 使用 curl 擷取遠端檔案。\n"
 
-#: ../urpmi:112
+#: ../urpmi:113
 msgid "  --curl-options - additional options to pass to curl\n"
 msgstr " --curl-options - 要額外傳給 curl 的參數\n"
 
-#: ../urpmi:113
+#: ../urpmi:114
 msgid "  --rsync-options- additional options to pass to rsync\n"
 msgstr "  --rsync-options- 要額外傳給 rsync 的參數\n"
 
-#: ../urpmi:114
+#: ../urpmi:115
 msgid "  --wget-options - additional options to pass to wget\n"
 msgstr "  --wget-options - 要額外傳給 wget 的參數\n"
 
-#: ../urpmi:115 ../urpmi.addmedia:47 ../urpmi.update:34
+#: ../urpmi:116 ../urpmi.addmedia:47 ../urpmi.update:34
 msgid "  --limit-rate   - limit the download speed.\n"
 msgstr "  --limit-rate   - 限制下載的速度。\n"
 
-#: ../urpmi:116
+#: ../urpmi:117
 msgid ""
 "  --resume       - resume transfer of partially-downloaded files\n"
 "                   (--no-resume disables it, default is disabled).\n"
@@ -1588,7 +1588,7 @@ msgstr ""
 "  --resume       - 接著傳送下載到一半的檔案\n"
 "                   (--no-resume 選項停用它，預設值為停用)。\n"
 
-#: ../urpmi:118 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:69
+#: ../urpmi:119 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:69
 msgid ""
 "  --proxy        - use specified HTTP proxy, the port number is assumed\n"
 "                   to be 1080 by default (format is <proxyhost[:port]>).\n"
@@ -1596,7 +1596,7 @@ msgstr ""
 "  --proxy        - 使用指定的 HTTP 代理伺服器，通訊埠假設為預設值 1080 \n"
 "                   (格式為 <proxyhost[:port]>)。\n"
 
-#: ../urpmi:120 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:71
+#: ../urpmi:121 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:71
 msgid ""
 "  --proxy-user   - specify user and password to use for proxy\n"
 "                   authentication (format is <user:password>).\n"
@@ -1604,13 +1604,13 @@ msgstr ""
 "  --proxy-user   - 指定代理伺服器認證的使用者帳號與密碼\n"
 "                   (格式為 <user:password>)。\n"
 
-#: ../urpmi:122
+#: ../urpmi:123
 msgid ""
 "  --bug          - output a bug report in directory indicated by\n"
 "                   next arg.\n"
 msgstr "  --bug          - 輸出臭蟲回報到下一個參數所指定的目錄。\n"
 
-#: ../urpmi:125
+#: ../urpmi:126
 msgid ""
 "  --verify-rpm   - verify rpm signature before installation\n"
 "                   (--no-verify-rpm disable it, default is enabled).\n"
@@ -1618,94 +1618,94 @@ msgstr ""
 "  --verify-rpm   - 安裝前檢驗 RPM 檔案的簽名.\n"
 "                   (--no-verify-rpm 停用它，預設值為啟用)。\n"
 
-#: ../urpmi:127
+#: ../urpmi:128
 msgid ""
 "  --test         - verify if the installation can be achieved correctly.\n"
 msgstr "  --test         - 確認安裝是否能夠正確完成。\n"
 
-#: ../urpmi:128
+#: ../urpmi:129
 msgid "  --excludepath  - exclude path separated by comma.\n"
 msgstr "  --excludepath  - 排除以逗號分隔的路徑。\n"
 
-#: ../urpmi:129
+#: ../urpmi:130
 msgid "  --excludedocs  - exclude doc files.\n"
 msgstr "  --excludedocs  - 排除說明文件檔案。\n"
 
-#: ../urpmi:130
+#: ../urpmi:131
 msgid "  --ignoresize   - don't verify disk space before installation.\n"
 msgstr "  --ignoresize   - 安裝前不檢查剩餘的磁碟空間。\n"
 
-#: ../urpmi:132
+#: ../urpmi:133
 msgid "  --skip         - packages which installation should be skipped\n"
 msgstr "  --skip         - 安裝時應該略過的套件。\n"
 
-#: ../urpmi:133
+#: ../urpmi:134
 msgid ""
 "  --more-choices - when several packages are found, propose more choices\n"
 "                   than the default.\n"
 msgstr ""
 "  --more-choices - 當找到不只一個套件時，提供除了預設值之外的多個選擇。\n"
 
-#: ../urpmi:135 ../urpmi.addmedia:69 ../urpmi.update:42
+#: ../urpmi:136 ../urpmi.addmedia:69 ../urpmi.update:42
 msgid "  --norebuild    - don't try to rebuild hdlist if not readable.\n"
 msgstr ""
 "  --norebuild    - 如果 hdlist 檔案無法讀取，不要嘗試重新建立\n"
 "                   它。\n"
 
-#: ../urpmi:136
+#: ../urpmi:137
 msgid "  --strict-arch  - upgrade only packages with the same architecture.\n"
 msgstr "  --strict-arch  - 只升級相同平台的套件。\n"
 
-#: ../urpmi:137 ../urpmq:76
+#: ../urpmi:138 ../urpmq:76
 msgid "  -a             - select all matches on command line.\n"
 msgstr "  -a             - 選擇命令列中所有符合的項目。\n"
 
-#: ../urpmi:138
+#: ../urpmi:139
 msgid "  -p             - allow search in provides to find package.\n"
 msgstr "  -p             - 允許於 provides 中搜尋套件。\n"
 
-#: ../urpmi:139
+#: ../urpmi:140
 msgid "  -P             - do not search in provides to find package.\n"
 msgstr "  -P             - 不在 provides 中搜尋套件。\n"
 
-#: ../urpmi:140 ../urpmq:91
+#: ../urpmi:141 ../urpmq:91
 msgid "  -y             - impose fuzzy search (same as --fuzzy).\n"
 msgstr "  -y             - 加上模糊搜尋 (與 --fuzzy 相同)。\n"
 
-#: ../urpmi:141 ../urpmq:88
+#: ../urpmi:142 ../urpmq:88
 msgid "  -s             - next package is a source package (same as --src).\n"
 msgstr "  -s             - 下個套件是原始碼套件 (與 --src 相同)。\n"
 
-#: ../urpmi:142 ../urpmi.addmedia:74 ../urpmi.removemedia:54
+#: ../urpmi:143 ../urpmi.addmedia:74 ../urpmi.removemedia:54
 #: ../urpmi.update:48
 msgid "  -q             - quiet mode.\n"
 msgstr "  -q             - 安靜模式。\n"
 
-#: ../urpmi:144
+#: ../urpmi:145
 msgid "  names or rpm files given on command line will be installed.\n"
 msgstr "  將會安裝於命令列指定的名稱或 RPM 檔案。\n"
 
-#: ../urpmi:193
+#: ../urpmi:194
 msgid "What can be done with binary rpm files when using --install-src"
 msgstr "使用 --install-src 時二進位 RPM 檔案可做的事"
 
-#: ../urpmi:214
+#: ../urpmi:215
 #, c-format
 msgid ""
 "Directory [%s] already exists, please use another directory for bug report "
 "or delete it"
 msgstr "目錄 [%s] 已經存在，請指定另一個目錄給臭蟲回報或刪除它"
 
-#: ../urpmi:215
+#: ../urpmi:216
 #, c-format
 msgid "Unable to create directory [%s] for bug report"
 msgstr "無法建立 [%s] 目錄給臭蟲回報使用"
 
-#: ../urpmi:218 ../urpmi:339
+#: ../urpmi:219 ../urpmi:362
 msgid "Copying failed"
 msgstr "複製失敗"
 
-#: ../urpmi:244
+#: ../urpmi:245
 #, c-format
 msgid ""
 "Error: %s appears to be mounted read-only.\n"
@@ -1714,12 +1714,16 @@ msgstr ""
 "錯誤： %s 似乎被掛載為唯讀模式。\n"
 "使用 --allow-force 標籤來強制執行。"
 
-#: ../urpmi:374
+#: ../urpmi:314
+msgid "Updating media..."
+msgstr ""
+
+#: ../urpmi:397
 #, c-format
 msgid "What is your choice? (1-%d) "
 msgstr "您要選擇何者？ (1-%d) "
 
-#: ../urpmi:404
+#: ../urpmi:427
 #, c-format
 msgid ""
 "The following packages can't be installed because they depend on packages\n"
@@ -1729,7 +1733,7 @@ msgstr ""
 "下列套件無法安裝，因為它們需要比您系統上的套件為舊的版本：\n"
 "%s"
 
-#: ../urpmi:412 ../urpmi:430
+#: ../urpmi:435 ../urpmi:453
 msgid ""
 "\n"
 "Continue installation anyway?"
@@ -1737,11 +1741,11 @@ msgstr ""
 "\n"
 "無論如何都要繼續安裝嗎？"
 
-#: ../urpmi:412 ../urpmi:430 ../urpmi:511
+#: ../urpmi:435 ../urpmi:453 ../urpmi:534
 msgid " (Y/n) "
 msgstr " (Y/n) (是/否) "
 
-#: ../urpmi:423
+#: ../urpmi:446
 #, c-format
 msgid ""
 "Some requested packages cannot be installed:\n"
@@ -1750,7 +1754,7 @@ msgstr ""
 "某些要求的套件無法安裝：\n"
 "%s"
 
-#: ../urpmi:453
+#: ../urpmi:476
 #, c-format
 msgid ""
 "The installation cannot continue because the following packages\n"
@@ -1760,7 +1764,7 @@ msgstr ""
 "安裝無法繼續，因為下列套件必須移除給其他套件來升級：\n"
 "%s\n"
 
-#: ../urpmi:458
+#: ../urpmi:481
 #, c-format
 msgid ""
 "The following packages have to be removed for others to be upgraded:\n"
@@ -1769,21 +1773,21 @@ msgstr ""
 "下列套件必須移除給其他套件來升級：\n"
 "%s"
 
-#: ../urpmi:493 ../urpmi:505
+#: ../urpmi:516 ../urpmi:528
 msgid ""
 "To satisfy dependencies, the following packages are going to be installed"
 msgstr "為了滿足相依性，將一併安裝下列套件"
 
-#: ../urpmi:494 ../urpmi:506
+#: ../urpmi:517 ../urpmi:529
 msgid "To satisfy dependencies, the following package is going to be installed"
 msgstr "為了滿足相依性，將一併安裝下列套件"
 
-#: ../urpmi:495
+#: ../urpmi:518
 #, c-format
 msgid "(%d packages, %d MB)"
 msgstr "(%d 個套件，共 %d MB)"
 
-#: ../urpmi:501
+#: ../urpmi:524
 #, c-format
 msgid ""
 "You need to be root to install the following dependencies:\n"
@@ -1792,66 +1796,66 @@ msgstr ""
 "您必須具有管理者權限以安裝下列的相依性項目：\n"
 "%s\n"
 
-#: ../urpmi:507
+#: ../urpmi:530
 #, c-format
 msgid "Proceed with the installation of the %d packages? (%d MB)"
 msgstr "繼續安裝這 %d 個套件？(共 %d MB)"
 
-#: ../urpmi:532
+#: ../urpmi:555
 msgid "Press Enter when ready..."
 msgstr "準備好時請按 Enter..."
 
-#: ../urpmi:538
+#: ../urpmi:561
 msgid "Cancel"
 msgstr "取消"
 
-#: ../urpmi:538
+#: ../urpmi:561
 msgid "Ok"
 msgstr "確定"
 
-#: ../urpmi:586
+#: ../urpmi:609
 msgid "The following packages have bad signatures"
 msgstr "下列套件有不正確不正確的簽章"
 
-#: ../urpmi:587
+#: ../urpmi:610
 msgid "Do you want to continue installation ?"
 msgstr "您要繼續安裝嗎？"
 
-#: ../urpmi:631
+#: ../urpmi:654
 #, c-format
 msgid "distributing %s"
 msgstr "正在發佈 %s"
 
 #. - there's a common prefix, simplify message
-#: ../urpmi:642
+#: ../urpmi:665
 #, c-format
 msgid "installing %s from %s"
 msgstr "正在由 %2$s 安裝 %1$s"
 
-#: ../urpmi:644
+#: ../urpmi:667
 #, c-format
 msgid "installing %s"
 msgstr "正在安裝 %s"
 
-#: ../urpmi:675
+#: ../urpmi:698
 msgid "Try installation without checking dependencies? (y/N) "
 msgstr "嘗試不檢查相依性直接安裝？ (y/N)(是/否)"
 
-#: ../urpmi:692
+#: ../urpmi:715
 msgid "Try harder to install (--force)? (y/N) "
 msgstr "嘗試採用強制安裝的方式 (--force)？ (y/N)(是/否)"
 
-#: ../urpmi:731
+#: ../urpmi:754
 #, c-format
 msgid "%d installation transactions failed"
 msgstr "%d 個安裝程序失敗"
 
-#: ../urpmi:747
+#: ../urpmi:770
 #, c-format
 msgid "The following package names were assumed: %s"
 msgstr "以下套件名稱是臆測的：%s"
 
-#: ../urpmi:764
+#: ../urpmi:787
 msgid "restarting urpmi"
 msgstr "正在重新啟動 urpmi"