From dc7a359bc304fc998c14f679a0744953a0db9993 Mon Sep 17 00:00:00 2001 From: Funda Wang Date: Fri, 23 Dec 2005 13:45:30 +0000 Subject: Updated POT file. --- po/zh_TW.po | 216 +++++++++++++++++++++++++++++++----------------------------- 1 file changed, 110 insertions(+), 106 deletions(-) (limited to 'po/zh_TW.po') diff --git a/po/zh_TW.po b/po/zh_TW.po index 2e0d6a30..2f013f9d 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -22,7 +22,7 @@ msgid "" msgstr "" "Project-Id-Version: zh_TW\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-12-17 20:28+0800\n" +"POT-Creation-Date: 2005-12-23 21:41+0800\n" "PO-Revision-Date: 2005-12-05 20:59+0800\n" "Last-Translator: Shiva Huang \n" "Language-Team: Chinese (traditional) \n" @@ -152,7 +152,7 @@ msgstr " (安裝用)" msgid "Package choice" msgstr "套件選擇" -#: ../gurpmi2:124 ../urpmi:372 +#: ../gurpmi2:124 ../urpmi:395 msgid "One of the following packages is needed:" msgstr "需要下列套件之一：" @@ -185,11 +185,11 @@ msgstr "" msgid "Package installation..." msgstr "套件安裝..." -#: ../gurpmi2:190 ../urpmi:520 +#: ../gurpmi2:190 ../urpmi:543 msgid "unable to get source packages, aborting" msgstr "無法取得原始碼套件，放棄" -#: ../gurpmi2:204 ../urpmi:531 +#: ../gurpmi2:204 ../urpmi:554 #, c-format msgid "Please insert the medium named \"%s\" on device [%s]" msgstr "請將名為 \"%s\" 的媒體置入裝置 [%s] 內" @@ -213,7 +213,7 @@ msgstr "" "您要繼續安裝嗎？" #. - Warning : the following message is parsed in urpm::parallel_* -#: ../gurpmi2:255 ../gurpmi2:304 ../urpmi:603 ../urpmi:726 +#: ../gurpmi2:255 ../gurpmi2:304 ../urpmi:626 ../urpmi:749 #, c-format msgid "" "Installation failed, some files are missing:\n" @@ -225,7 +225,7 @@ msgstr "" "您或許要更新您的 urpmi 資料庫" #. - Warning : the following message is parsed in urpm::parallel_* -#: ../gurpmi2:262 ../urpme:124 ../urpmi:647 +#: ../gurpmi2:262 ../urpme:124 ../urpmi:670 #, c-format msgid "removing %s" msgstr "正在移除 %s" @@ -240,7 +240,7 @@ msgid "Installing package `%s' (%s/%s)..." msgstr "正在安裝套件 `%s' (%s/%s)..." #. - Warning : the following message is parsed in urpm::parallel_* -#: ../gurpmi2:290 ../urpmi:614 ../urpmi:668 ../urpmi:687 ../urpmi:704 +#: ../gurpmi2:290 ../urpmi:637 ../urpmi:691 ../urpmi:710 ../urpmi:727 msgid "Installation failed" msgstr "安裝失敗" @@ -248,7 +248,7 @@ msgstr "安裝失敗" msgid "_Done" msgstr "完成 (_D)" -#: ../gurpmi2:307 ../urpmi:743 +#: ../gurpmi2:307 ../urpmi:766 msgid "The package(s) are already installed" msgstr "每個套件都已經安裝了" @@ -283,7 +283,7 @@ msgid " defaults is %s.\n" msgstr " 預設為 %s。\n" #. - need to be root if binary rpms are to be installed -#: ../rurpmi:11 ../urpmi:235 +#: ../rurpmi:11 ../urpmi:236 msgid "Only superuser is allowed to install packages" msgstr "只有擁有管理者權限的使用者才能安裝套件" @@ -745,7 +745,7 @@ msgid "" "corrupted." msgstr "無法為媒介 \"%s\" 建立 synthesis 檔。您的 hdlist 檔可能並不標準。" -#: ../urpm.pm:1945 ../urpm.pm:1981 ../urpmi:329 +#: ../urpm.pm:1945 ../urpm.pm:1981 ../urpmi:352 #, c-format msgid "built hdlist synthesis file for medium \"%s\"" msgstr "為媒體 \"%s\" 建立 hdlist synthesis 檔" @@ -990,28 +990,28 @@ msgstr "警告：在 MD5SUM 檔案中找不到 %s 的 md5sum" msgid "This operation is forbidden while running in restricted mode" msgstr "使用限制模式執行時禁止該操作程序" -#: ../urpm/args.pm:104 ../urpm/args.pm:113 +#: ../urpm/args.pm:105 ../urpm/args.pm:114 msgid "bad proxy declaration on command line\n" msgstr "命令列傳入的代理伺服器宣告錯誤\n" -#: ../urpm/args.pm:223 +#: ../urpm/args.pm:224 msgid "You need to be root to use --use-distrib" msgstr "您必須是 root 才能使用 --use-distrib" -#: ../urpm/args.pm:255 +#: ../urpm/args.pm:256 #, c-format msgid "urpmq: cannot read rpm file \"%s\"\n" msgstr "urpmq：無法讀取 rpm 檔案 \"%s\"\n" #. Translator: Add here the keys which might be pressed in the "No"-case. -#: ../urpm/msg.pm:46 ../urpme:33 ../urpmi:409 ../urpmi:427 ../urpmi:462 -#: ../urpmi:509 ../urpmi:593 ../urpmi:673 +#: ../urpm/msg.pm:46 ../urpme:33 ../urpmi:432 ../urpmi:450 ../urpmi:485 +#: ../urpmi:532 ../urpmi:616 ../urpmi:696 msgid "Nn" msgstr "Nn否" #. Translator: Add here the keys which might be pressed in the "Yes"-case. -#: ../urpm/msg.pm:47 ../urpme:35 ../urpmi:410 ../urpmi:428 ../urpmi:463 -#: ../urpmi:510 ../urpmi:594 ../urpmi:674 +#: ../urpm/msg.pm:47 ../urpme:35 ../urpmi:433 ../urpmi:451 ../urpmi:486 +#: ../urpmi:533 ../urpmi:617 ../urpmi:697 msgid "Yy" msgstr "Yy是" @@ -1063,7 +1063,7 @@ msgid "Installation failed on node %s" msgstr "節點 %s 安裝失敗" #. - Warning : the following message is parsed in urpm::parallel_* -#: ../urpm/parallel_ka_run.pm:239 ../urpm/parallel_ssh.pm:254 ../urpmi:740 +#: ../urpm/parallel_ka_run.pm:239 ../urpm/parallel_ssh.pm:254 ../urpmi:763 msgid "Installation is possible" msgstr "可以安裝" @@ -1138,12 +1138,12 @@ msgstr "" "\n" "使用方式：\n" -#: ../urpme:43 ../urpmf:34 ../urpmi:79 ../urpmi.addmedia:44 +#: ../urpme:43 ../urpmf:34 ../urpmi:80 ../urpmi.addmedia:44 #: ../urpmi.removemedia:50 ../urpmi.update:31 ../urpmq:44 msgid " --help - print this help message.\n" msgstr " --help - 顯示此說明訊息。\n" -#: ../urpme:44 ../urpmi:86 +#: ../urpme:44 ../urpmi:87 msgid " --auto - automatically select a package in choices.\n" msgstr " --auto - 自動選擇套件。\n" @@ -1151,12 +1151,12 @@ msgstr " --auto - 自動選擇套件。\n" msgid " --test - verify if the removal can be achieved correctly.\n" msgstr " --test - 確認刪除是否能夠正確進行。\n" -#: ../urpme:46 ../urpmi:101 ../urpmq:63 +#: ../urpme:46 ../urpmi:102 ../urpmq:63 msgid "" " --force - force invocation even if some packages do not exist.\n" msgstr " --force - 即使某些套件不存在仍然強制執行。\n" -#: ../urpme:47 ../urpmi:106 ../urpmq:64 +#: ../urpme:47 ../urpmi:107 ../urpmq:64 msgid " --parallel - distributed urpmi across machines of alias.\n" msgstr " --parallel - 在同步管理的機器上分散式的執行 urpmi。\n" @@ -1164,7 +1164,7 @@ msgstr " --parallel - 在同步管理的機器上分散式的執行 urpmi msgid " --root - use another root for rpm removal.\n" msgstr " --root - 使用另一個根目錄移除 rpm 套件。\n" -#: ../urpme:49 ../urpmi:131 +#: ../urpme:49 ../urpmi:132 msgid " --noscripts - do not execute package scriptlet(s)\n" msgstr " --noscripts - 不執行套件中的命令稿。\n" @@ -1176,7 +1176,7 @@ msgstr "" " --use-distrib - 立即由一個散佈套件樹設定 urpmi，有助於安裝/反安裝一" "個 藉由 --root 選項的 chroot。\n" -#: ../urpme:52 ../urpmi:143 ../urpmi.addmedia:75 ../urpmi.removemedia:55 +#: ../urpme:52 ../urpmi:144 ../urpmi.addmedia:75 ../urpmi.removemedia:55 #: ../urpmi.update:49 ../urpmq:90 msgid " -v - verbose mode.\n" msgstr " -v - 完整訊息模式。\n" @@ -1199,7 +1199,7 @@ msgid "unknown packages" msgstr "未知的套件" #. - Warning : the following message is parsed in urpm::parallel_* -#: ../urpme:103 ../urpmi:445 +#: ../urpme:103 ../urpmi:468 #, c-format msgid "removing package %s will break your system" msgstr "移除套件 %s 將破壞您的系統" @@ -1219,7 +1219,7 @@ msgid "" "To satisfy dependencies, the following %d packages will be removed (%d MB)" msgstr "為了滿足相依性，下列 %d 個套件將被移除 (%d MB)" -#: ../urpme:120 ../urpmi:464 ../urpmi:595 +#: ../urpme:120 ../urpmi:487 ../urpmi:618 msgid " (y/N) " msgstr " (y/N) (是/否) " @@ -1248,11 +1248,11 @@ msgstr "" msgid " --version - print this tool's version number.\n" msgstr " --version - 印出這個工具的版本編號。\n" -#: ../urpmf:36 ../urpmi:124 ../urpmq:73 +#: ../urpmf:36 ../urpmi:125 ../urpmq:73 msgid " --env - use specific environment (typically a bug report).\n" msgstr " --env - 使用特定環境 (一般用於臭蟲回報)。\n" -#: ../urpmf:37 ../urpmi:83 ../urpmq:48 +#: ../urpmf:37 ../urpmi:84 ../urpmq:48 msgid " --excludemedia - do not use the given media, separated by comma.\n" msgstr " --excludemedia - 不使用給定的媒體，不同媒體間請以逗號分隔。\n" @@ -1261,16 +1261,16 @@ msgid "" " --literal, -l - don't match patterns, use argument as a literal string.\n" msgstr " --literal, -l - 不比對樣版，把參數當作一般字串。\n" -#: ../urpmf:39 ../urpmi:81 ../urpmq:46 +#: ../urpmf:39 ../urpmi:82 ../urpmq:46 msgid " --media - use only the given media, separated by comma.\n" msgstr " --media - 只使用給定的媒體，不同媒體間請以逗號分隔。\n" -#: ../urpmf:40 ../urpmi:84 ../urpmq:49 +#: ../urpmf:40 ../urpmi:85 ../urpmq:49 msgid "" " --sortmedia - sort media according to substrings separated by comma.\n" msgstr " --sortmedia - 依據子字串排序媒體，以逗號分開。\n" -#: ../urpmf:41 ../urpmi:85 ../urpmq:50 +#: ../urpmf:41 ../urpmi:86 ../urpmq:50 msgid " --synthesis - use the given synthesis instead of urpmi db.\n" msgstr " --synthesis - 使用指定的 synthesis 檔而非 urpmi 資料庫。\n" @@ -1278,7 +1278,7 @@ msgstr " --synthesis - 使用指定的 synthesis 檔而非 urpmi 資料庫 msgid " --uniq - do not print identical lines twice.\n" msgstr " --uniq - 不顯示相同的訊息。\n" -#: ../urpmf:43 ../urpmi:80 ../urpmq:45 +#: ../urpmf:43 ../urpmi:81 ../urpmq:45 msgid " --update - use only update media.\n" msgstr " --update - 只使用更新媒體。\n" @@ -1433,7 +1433,7 @@ msgstr " -f - 顯示版本、發行編號與平台。\n" msgid "Incorrect format: you may use only one multi-valued tag" msgstr "格式錯誤：您只能使用一個多值標籤" -#: ../urpmf:173 ../urpmi:224 ../urpmq:115 +#: ../urpmf:173 ../urpmi:225 ../urpmq:115 #, c-format msgid "using specific environment on %s\n" msgstr "正在 %s 上使用特定的環境\n" @@ -1449,7 +1449,7 @@ msgstr "" msgid "You may want to use --name to search for package names.\n" msgstr "您或許想要使用 --name 參數來搜尋套件名稱。\n" -#: ../urpmi:74 +#: ../urpmi:75 #, c-format msgid "" "urpmi version %s\n" @@ -1465,28 +1465,28 @@ msgstr "" "\n" "使用方式：\n" -#: ../urpmi:82 ../urpmq:47 +#: ../urpmi:83 ../urpmq:47 msgid "" " --searchmedia - use only the given media to search requested (or updated) " "packages.\n" msgstr " --searchmedia - 只使用指定的媒體來搜尋或升級套件。\n" -#: ../urpmi:87 ../urpmq:51 +#: ../urpmi:88 ../urpmq:51 msgid "" " --auto-select - automatically select packages to upgrade the system.\n" msgstr " --auto-select - 自動選擇要用來升級系統的套件。\n" -#: ../urpmi:88 +#: ../urpmi:89 msgid "" " --no-uninstall - never ask to uninstall a package, abort the " "installation.\n" msgstr " --no-uninstall - 絕不要求移除套件，直接中斷安裝。\n" -#: ../urpmi:89 +#: ../urpmi:90 msgid " --no-install - don't install packages (only download)\n" msgstr " --no-install - 不安裝套件 (只下載)。\n" -#: ../urpmi:90 ../urpmq:53 +#: ../urpmi:91 ../urpmq:53 msgid "" " --keep - keep existing packages if possible, reject requested\n" " packages that lead to removals.\n" @@ -1494,7 +1494,7 @@ msgstr "" " --keep - 盡可能的保留現存的套件，拒絕安裝會導致移除其他套件的\n" " 套件。\n" -#: ../urpmi:92 +#: ../urpmi:93 #, c-format msgid "" " --split-level - split in small transaction if more than given packages\n" @@ -1505,38 +1505,38 @@ msgstr "" " 分割為幾個小的安裝程序。\n" " 預設值為 %d。\n" -#: ../urpmi:95 +#: ../urpmi:96 #, c-format msgid " --split-length - small transaction length, default is %d.\n" msgstr " --split-length - 小型安裝程序大小，預設值為 %d。\n" -#: ../urpmi:96 ../urpmq:52 +#: ../urpmi:97 ../urpmq:52 msgid " --fuzzy - impose fuzzy search (same as -y).\n" msgstr " --fuzzy - 加上模糊搜尋 (與 -y 相同)。\n" -#: ../urpmi:97 ../urpmq:61 +#: ../urpmi:98 ../urpmq:61 msgid " --src - next package is a source package (same as -s).\n" msgstr " --src - 下個套件是原始碼套件 (與 -s 相同)。\n" -#: ../urpmi:98 +#: ../urpmi:99 msgid " --install-src - install only source package (no binaries).\n" msgstr " --install-src - 只安裝原始碼套件 (不安裝二進位檔)。\n" -#: ../urpmi:99 +#: ../urpmi:100 msgid " --clean - remove rpm from cache before anything else.\n" msgstr " --clean - 在執行任何事前先由快取中移除 RPM 檔案。\n" -#: ../urpmi:100 +#: ../urpmi:101 msgid " --noclean - don't clean rpms from cache.\n" msgstr " --noclean - 不清除快取中的 RPM 檔案。\n" -#: ../urpmi:102 +#: ../urpmi:103 msgid "" " --allow-nodeps - allow asking user to install packages without\n" " dependencies checking.\n" msgstr " --allow-nodeps - 允許要求使用者不檢查相依性就安裝套件。\n" -#: ../urpmi:104 +#: ../urpmi:105 msgid "" " --allow-force - allow asking user to install packages without\n" " dependencies checking and integrity.\n" @@ -1544,11 +1544,11 @@ msgstr "" " --allow-force - 允許要求使用者安裝套件而不檢查相依性與完整\n" " 性。\n" -#: ../urpmi:107 +#: ../urpmi:108 msgid " --root - use another root for rpm installation.\n" msgstr " --root - 使用另一個根目錄進行 RPM 套件的安裝。\n" -#: ../urpmi:108 +#: ../urpmi:109 msgid "" " --use-distrib - configure urpmi on the fly from a distrib tree, useful\n" " to install a chroot with --root option.\n" @@ -1556,31 +1556,31 @@ msgstr "" " --use-distrib - 由一個發行版樹即時設定 urpmi，有助於藉由 --root 選項\n" " 安裝一個 chroot。\n" -#: ../urpmi:110 ../urpmi.addmedia:45 ../urpmi.update:32 ../urpmq:67 +#: ../urpmi:111 ../urpmi.addmedia:45 ../urpmi.update:32 ../urpmq:67 msgid " --wget - use wget to retrieve distant files.\n" msgstr " --wget - 使用 wget 擷取遠端檔案。\n" -#: ../urpmi:111 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:68 +#: ../urpmi:112 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:68 msgid " --curl - use curl to retrieve distant files.\n" msgstr " --curl - 使用 curl 擷取遠端檔案。\n" -#: ../urpmi:112 +#: ../urpmi:113 msgid " --curl-options - additional options to pass to curl\n" msgstr " --curl-options - 要額外傳給 curl 的參數\n" -#: ../urpmi:113 +#: ../urpmi:114 msgid " --rsync-options- additional options to pass to rsync\n" msgstr " --rsync-options- 要額外傳給 rsync 的參數\n" -#: ../urpmi:114 +#: ../urpmi:115 msgid " --wget-options - additional options to pass to wget\n" msgstr " --wget-options - 要額外傳給 wget 的參數\n" -#: ../urpmi:115 ../urpmi.addmedia:47 ../urpmi.update:34 +#: ../urpmi:116 ../urpmi.addmedia:47 ../urpmi.update:34 msgid " --limit-rate - limit the download speed.\n" msgstr " --limit-rate - 限制下載的速度。\n" -#: ../urpmi:116 +#: ../urpmi:117 msgid "" " --resume - resume transfer of partially-downloaded files\n" " (--no-resume disables it, default is disabled).\n" @@ -1588,7 +1588,7 @@ msgstr "" " --resume - 接著傳送下載到一半的檔案\n" " (--no-resume 選項停用它，預設值為停用)。\n" -#: ../urpmi:118 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:69 +#: ../urpmi:119 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:69 msgid "" " --proxy - use specified HTTP proxy, the port number is assumed\n" " to be 1080 by default (format is ).\n" @@ -1596,7 +1596,7 @@ msgstr "" " --proxy - 使用指定的 HTTP 代理伺服器，通訊埠假設為預設值 1080 \n" " (格式為 )。\n" -#: ../urpmi:120 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:71 +#: ../urpmi:121 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:71 msgid "" " --proxy-user - specify user and password to use for proxy\n" " authentication (format is ).\n" @@ -1604,13 +1604,13 @@ msgstr "" " --proxy-user - 指定代理伺服器認證的使用者帳號與密碼\n" " (格式為 )。\n" -#: ../urpmi:122 +#: ../urpmi:123 msgid "" " --bug - output a bug report in directory indicated by\n" " next arg.\n" msgstr " --bug - 輸出臭蟲回報到下一個參數所指定的目錄。\n" -#: ../urpmi:125 +#: ../urpmi:126 msgid "" " --verify-rpm - verify rpm signature before installation\n" " (--no-verify-rpm disable it, default is enabled).\n" @@ -1618,94 +1618,94 @@ msgstr "" " --verify-rpm - 安裝前檢驗 RPM 檔案的簽名.\n" " (--no-verify-rpm 停用它，預設值為啟用)。\n" -#: ../urpmi:127 +#: ../urpmi:128 msgid "" " --test - verify if the installation can be achieved correctly.\n" msgstr " --test - 確認安裝是否能夠正確完成。\n" -#: ../urpmi:128 +#: ../urpmi:129 msgid " --excludepath - exclude path separated by comma.\n" msgstr " --excludepath - 排除以逗號分隔的路徑。\n" -#: ../urpmi:129 +#: ../urpmi:130 msgid " --excludedocs - exclude doc files.\n" msgstr " --excludedocs - 排除說明文件檔案。\n" -#: ../urpmi:130 +#: ../urpmi:131 msgid " --ignoresize - don't verify disk space before installation.\n" msgstr " --ignoresize - 安裝前不檢查剩餘的磁碟空間。\n" -#: ../urpmi:132 +#: ../urpmi:133 msgid " --skip - packages which installation should be skipped\n" msgstr " --skip - 安裝時應該略過的套件。\n" -#: ../urpmi:133 +#: ../urpmi:134 msgid "" " --more-choices - when several packages are found, propose more choices\n" " than the default.\n" msgstr "" " --more-choices - 當找到不只一個套件時，提供除了預設值之外的多個選擇。\n" -#: ../urpmi:135 ../urpmi.addmedia:69 ../urpmi.update:42 +#: ../urpmi:136 ../urpmi.addmedia:69 ../urpmi.update:42 msgid " --norebuild - don't try to rebuild hdlist if not readable.\n" msgstr "" " --norebuild - 如果 hdlist 檔案無法讀取，不要嘗試重新建立\n" " 它。\n" -#: ../urpmi:136 +#: ../urpmi:137 msgid " --strict-arch - upgrade only packages with the same architecture.\n" msgstr " --strict-arch - 只升級相同平台的套件。\n" -#: ../urpmi:137 ../urpmq:76 +#: ../urpmi:138 ../urpmq:76 msgid " -a - select all matches on command line.\n" msgstr " -a - 選擇命令列中所有符合的項目。\n" -#: ../urpmi:138 +#: ../urpmi:139 msgid " -p - allow search in provides to find package.\n" msgstr " -p - 允許於 provides 中搜尋套件。\n" -#: ../urpmi:139 +#: ../urpmi:140 msgid " -P - do not search in provides to find package.\n" msgstr " -P - 不在 provides 中搜尋套件。\n" -#: ../urpmi:140 ../urpmq:91 +#: ../urpmi:141 ../urpmq:91 msgid " -y - impose fuzzy search (same as --fuzzy).\n" msgstr " -y - 加上模糊搜尋 (與 --fuzzy 相同)。\n" -#: ../urpmi:141 ../urpmq:88 +#: ../urpmi:142 ../urpmq:88 msgid " -s - next package is a source package (same as --src).\n" msgstr " -s - 下個套件是原始碼套件 (與 --src 相同)。\n" -#: ../urpmi:142 ../urpmi.addmedia:74 ../urpmi.removemedia:54 +#: ../urpmi:143 ../urpmi.addmedia:74 ../urpmi.removemedia:54 #: ../urpmi.update:48 msgid " -q - quiet mode.\n" msgstr " -q - 安靜模式。\n" -#: ../urpmi:144 +#: ../urpmi:145 msgid " names or rpm files given on command line will be installed.\n" msgstr " 將會安裝於命令列指定的名稱或 RPM 檔案。\n" -#: ../urpmi:193 +#: ../urpmi:194 msgid "What can be done with binary rpm files when using --install-src" msgstr "使用 --install-src 時二進位 RPM 檔案可做的事" -#: ../urpmi:214 +#: ../urpmi:215 #, c-format msgid "" "Directory [%s] already exists, please use another directory for bug report " "or delete it" msgstr "目錄 [%s] 已經存在，請指定另一個目錄給臭蟲回報或刪除它" -#: ../urpmi:215 +#: ../urpmi:216 #, c-format msgid "Unable to create directory [%s] for bug report" msgstr "無法建立 [%s] 目錄給臭蟲回報使用" -#: ../urpmi:218 ../urpmi:339 +#: ../urpmi:219 ../urpmi:362 msgid "Copying failed" msgstr "複製失敗" -#: ../urpmi:244 +#: ../urpmi:245 #, c-format msgid "" "Error: %s appears to be mounted read-only.\n" @@ -1714,12 +1714,16 @@ msgstr "" "錯誤： %s 似乎被掛載為唯讀模式。\n" "使用 --allow-force 標籤來強制執行。" -#: ../urpmi:374 +#: ../urpmi:314 +msgid "Updating media..." +msgstr "" + +#: ../urpmi:397 #, c-format msgid "What is your choice? (1-%d) " msgstr "您要選擇何者？ (1-%d) " -#: ../urpmi:404 +#: ../urpmi:427 #, c-format msgid "" "The following packages can't be installed because they depend on packages\n" @@ -1729,7 +1733,7 @@ msgstr "" "下列套件無法安裝，因為它們需要比您系統上的套件為舊的版本：\n" "%s" -#: ../urpmi:412 ../urpmi:430 +#: ../urpmi:435 ../urpmi:453 msgid "" "\n" "Continue installation anyway?" @@ -1737,11 +1741,11 @@ msgstr "" "\n" "無論如何都要繼續安裝嗎？" -#: ../urpmi:412 ../urpmi:430 ../urpmi:511 +#: ../urpmi:435 ../urpmi:453 ../urpmi:534 msgid " (Y/n) " msgstr " (Y/n) (是/否) " -#: ../urpmi:423 +#: ../urpmi:446 #, c-format msgid "" "Some requested packages cannot be installed:\n" @@ -1750,7 +1754,7 @@ msgstr "" "某些要求的套件無法安裝：\n" "%s" -#: ../urpmi:453 +#: ../urpmi:476 #, c-format msgid "" "The installation cannot continue because the following packages\n" @@ -1760,7 +1764,7 @@ msgstr "" "安裝無法繼續，因為下列套件必須移除給其他套件來升級：\n" "%s\n" -#: ../urpmi:458 +#: ../urpmi:481 #, c-format msgid "" "The following packages have to be removed for others to be upgraded:\n" @@ -1769,21 +1773,21 @@ msgstr "" "下列套件必須移除給其他套件來升級：\n" "%s" -#: ../urpmi:493 ../urpmi:505 +#: ../urpmi:516 ../urpmi:528 msgid "" "To satisfy dependencies, the following packages are going to be installed" msgstr "為了滿足相依性，將一併安裝下列套件" -#: ../urpmi:494 ../urpmi:506 +#: ../urpmi:517 ../urpmi:529 msgid "To satisfy dependencies, the following package is going to be installed" msgstr "為了滿足相依性，將一併安裝下列套件" -#: ../urpmi:495 +#: ../urpmi:518 #, c-format msgid "(%d packages, %d MB)" msgstr "(%d 個套件，共 %d MB)" -#: ../urpmi:501 +#: ../urpmi:524 #, c-format msgid "" "You need to be root to install the following dependencies:\n" @@ -1792,66 +1796,66 @@ msgstr "" "您必須具有管理者權限以安裝下列的相依性項目：\n" "%s\n" -#: ../urpmi:507 +#: ../urpmi:530 #, c-format msgid "Proceed with the installation of the %d packages? (%d MB)" msgstr "繼續安裝這 %d 個套件？(共 %d MB)" -#: ../urpmi:532 +#: ../urpmi:555 msgid "Press Enter when ready..." msgstr "準備好時請按 Enter..." -#: ../urpmi:538 +#: ../urpmi:561 msgid "Cancel" msgstr "取消" -#: ../urpmi:538 +#: ../urpmi:561 msgid "Ok" msgstr "確定" -#: ../urpmi:586 +#: ../urpmi:609 msgid "The following packages have bad signatures" msgstr "下列套件有不正確不正確的簽章" -#: ../urpmi:587 +#: ../urpmi:610 msgid "Do you want to continue installation ?" msgstr "您要繼續安裝嗎？" -#: ../urpmi:631 +#: ../urpmi:654 #, c-format msgid "distributing %s" msgstr "正在發佈 %s" #. - there's a common prefix, simplify message -#: ../urpmi:642 +#: ../urpmi:665 #, c-format msgid "installing %s from %s" msgstr "正在由 %2$s 安裝 %1$s" -#: ../urpmi:644 +#: ../urpmi:667 #, c-format msgid "installing %s" msgstr "正在安裝 %s" -#: ../urpmi:675 +#: ../urpmi:698 msgid "Try installation without checking dependencies? (y/N) " msgstr "嘗試不檢查相依性直接安裝？ (y/N)(是/否)" -#: ../urpmi:692 +#: ../urpmi:715 msgid "Try harder to install (--force)? (y/N) " msgstr "嘗試採用強制安裝的方式 (--force)？ (y/N)(是/否)" -#: ../urpmi:731 +#: ../urpmi:754 #, c-format msgid "%d installation transactions failed" msgstr "%d 個安裝程序失敗" -#: ../urpmi:747 +#: ../urpmi:770 #, c-format msgid "The following package names were assumed: %s" msgstr "以下套件名稱是臆測的：%s" -#: ../urpmi:764 +#: ../urpmi:787 msgid "restarting urpmi" msgstr "正在重新啟動 urpmi" -- cgit v1.2.1