po: sync with the code

1 files changed, 242 insertions, 155 deletions

diff --git a/po/zh_CN.po b/po/zh_CN.po
index c472121..8ac19f1 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: zh_CN\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-13 13:20+CET\n"
+"POT-Creation-Date: 2010-04-30 09:43+BRT\n"
 "PO-Revision-Date: 2008-03-29 21:33+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
@@ -33,13 +33,13 @@ msgid "Unable to load configuration file %s: %s"
 msgstr ""
 
 #: ../src/msec/config.py:225 ../src/msec/config.py:334
-#: ../src/msec/config.py:445
+#: ../src/msec/config.py:442
 #, fuzzy
 msgid "Bad config option: %s"
 msgstr "保存配置(_S)"
 
 #: ../src/msec/config.py:260 ../src/msec/config.py:373
-#: ../src/msec/config.py:471
+#: ../src/msec/config.py:468
 #, fuzzy
 msgid "Unable to save %s: %s"
 msgstr "无法装入图像文件 %s"
@@ -73,13 +73,12 @@ msgid "Enable checking for files/directories writable by everybody."
 msgstr "检查每人可写的文件/目录"
 
 #: ../src/msec/help.py:18
-msgid "Enable IP spoofing protection."
-msgstr "启用 IP 欺骗保护。"
+msgid "Log syslog messages on console terminal 12."
+msgstr ""
 
 #: ../src/msec/help.py:20
-#, fuzzy
-msgid "Enable name resolution spoofing protection."
-msgstr "名称解析欺骗保护"
+msgid "Send mail reports even if no changes were detected."
+msgstr "如果没有检测到更改，也发送邮件报告。"
 
 #: ../src/msec/help.py:22
 msgid ""
@@ -160,8 +159,8 @@ msgstr ""
 "的 man)。"
 
 #: ../src/msec/help.py:52
-msgid "Accept bogus IPv4 error messages."
-msgstr "接受有错的 IPv4 错误消息。"
+msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
+msgstr ""
 
 #: ../src/msec/help.py:54
 msgid ""
@@ -221,16 +220,17 @@ msgid "Enable checking for unowned files."
 msgstr "报告无主文件"
 
 #: ../src/msec/help.py:76
-msgid "Log syslog messages on console terminal 12."
-msgstr ""
+msgid "Set the shell timeout. A value of zero means no timeout."
+msgstr "设置 shell 超时。若设为 0, 则为没有超时。"
 
 #: ../src/msec/help.py:78
 msgid "Allow display managers (kdm and gdm) to display list of local users."
 msgstr ""
 
 #: ../src/msec/help.py:80
-msgid "Send mail reports even if no changes were detected."
-msgstr "如果没有检测到更改，也发送邮件报告。"
+#, fuzzy
+msgid "Enable name resolution spoofing protection."
+msgstr "名称解析欺骗保护"
 
 #: ../src/msec/help.py:82
 msgid ""
@@ -267,50 +267,46 @@ msgid ""
 msgstr ""
 
 #: ../src/msec/help.py:92
-#, fuzzy
-msgid "Enable checking for changes in system groups."
-msgstr "报告无主文件"
+msgid "Show security notifications in system tray using libnotify."
+msgstr ""
 
 #: ../src/msec/help.py:94
 msgid ""
-"Allow remote root login via sshd. If yes, login is allowed. If without-"
-"password, only public-key authentication logins are allowed. See sshd_config"
-"(5) man page for more information."
+"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
+"default system umask is used."
 msgstr ""
 
 #: ../src/msec/help.py:96
-msgid "Show security notifications in system tray using libnotify."
-msgstr ""
-
-#: ../src/msec/help.py:98
 msgid "Enable checking for open network ports."
 msgstr ""
 
-#: ../src/msec/help.py:100
+#: ../src/msec/help.py:98
 #, fuzzy
 msgid "Allow direct root login on terminal."
 msgstr "允许直接 root 登录。"
 
-#: ../src/msec/help.py:102
+#: ../src/msec/help.py:100
 msgid "Run security checks when machine is running on battery power."
 msgstr ""
 
-#: ../src/msec/help.py:104
-msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
-msgstr ""
+#: ../src/msec/help.py:102
+#, fuzzy
+msgid "Enable checking for changes in system groups."
+msgstr "报告无主文件"
 
-#: ../src/msec/help.py:106
+#: ../src/msec/help.py:104
 msgid ""
-"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
-"default system umask is used."
+"Allow remote root login via sshd. If yes, login is allowed. If without-"
+"password, only public-key authentication logins are allowed. See sshd_config"
+"(5) man page for more information."
 msgstr ""
 
-#: ../src/msec/help.py:108
+#: ../src/msec/help.py:106
 #, fuzzy
 msgid "Enable logging of strange network packets."
 msgstr "启用 IPv4 异常包日志。"
 
-#: ../src/msec/help.py:110
+#: ../src/msec/help.py:108
 msgid ""
 "Define the default retention period for logs, in weeks. Some countries "
 "require that the log files should be kept for 12 months, other do not have "
@@ -318,10 +314,14 @@ msgid ""
 "that should be kept by logrotate on the system."
 msgstr ""
 
-#: ../src/msec/help.py:112
+#: ../src/msec/help.py:110
 msgid "Ask for root password when going to single user level (man sulogin(8))."
 msgstr ""
 
+#: ../src/msec/help.py:112
+msgid "Enable IP spoofing protection."
+msgstr "启用 IP 欺骗保护。"
+
 #: ../src/msec/help.py:114
 msgid "Allow root access without password for the members of the wheel group."
 msgstr ""
@@ -354,27 +354,23 @@ msgid ""
 msgstr ""
 
 #: ../src/msec/help.py:124
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "设置 shell 超时。若设为 0, 则为没有超时。"
-
-#: ../src/msec/help.py:126
 #, fuzzy
 msgid "Enable daily security checks."
 msgstr "运行每日安全检查"
 
-#: ../src/msec/help.py:128
+#: ../src/msec/help.py:126
 #, fuzzy
 msgid "Accept ICMP echo."
 msgstr "接受 icmp 回应。"
 
-#: ../src/msec/help.py:130
+#: ../src/msec/help.py:128
 #, fuzzy
 msgid ""
 "Set the password minimum length and minimum number of digit and minimum "
 "number of capitalized letters, using length,ndigits,nupper format."
 msgstr "设置密码最短长度, 数字的最少个数, 大写字母的最少个数。"
 
-#: ../src/msec/help.py:132
+#: ../src/msec/help.py:130
 #, fuzzy
 msgid ""
 "Allow full access to network services controlled by tcp_wrapper (see hosts."
@@ -393,20 +389,20 @@ msgstr ""
 "\n"
 "要认证您需要的服务, 请使用 /etc/hosts.allow(参看 hosts.allow(5))。"
 
-#: ../src/msec/help.py:134
+#: ../src/msec/help.py:132
 msgid ""
 "Enable verification of integrity of installed RPM packages. This will notify "
 "you if checksums of the installed files were changed, showing separate "
 "results for binary and configuration files."
 msgstr ""
 
-#: ../src/msec/help.py:136
+#: ../src/msec/help.py:134
 msgid ""
 "Patterns to exclude from disk checks. This parameter is parsed as a regex "
 "(7), so you may use complex expressions."
 msgstr ""
 
-#: ../src/msec/help.py:138
+#: ../src/msec/help.py:136
 msgid ""
 "Allow users in wheel group to use sudo. If this option is set to 'yes', the "
 "users in wheel group are allowed to use sudo and run commands as root by "
@@ -416,23 +412,27 @@ msgid ""
 "only use this setting if you know what you are doing!"
 msgstr ""
 
-#: ../src/msec/help.py:140
+#: ../src/msec/help.py:138
 #, fuzzy
 msgid "Set the root umask."
 msgstr "设置 root 的文件模式创建 mask。"
 
-#: ../src/msec/help.py:142
+#: ../src/msec/help.py:140
 msgid "Perform hourly security check for changes in system configuration."
 msgstr ""
 
-#: ../src/msec/help.py:144
+#: ../src/msec/help.py:142
 msgid "Enforce MSEC settings on system startup"
 msgstr ""
 
-#: ../src/msec/help.py:146
+#: ../src/msec/help.py:144
 msgid "Enable periodic security check results to terminal."
 msgstr ""
 
+#: ../src/msec/help.py:146
+msgid "Accept bogus IPv4 error messages."
+msgstr "接受有错的 IPv4 错误消息。"
+
 #: ../src/msec/help.py:148
 #, fuzzy
 msgid "Enable checking for additions/removals of sgid files."
@@ -558,15 +558,34 @@ msgstr ""
 msgid "Wrong permissions of %s: should be %o"
 msgstr ""
 
-#: ../src/msec/libmsec.py:914
+#: ../src/msec/libmsec.py:901
+#, fuzzy
+msgid "Enforcing acl on %s"
+msgstr "从 %s 切换到 %s"
+
+#: ../src/msec/libmsec.py:915
+#, fuzzy
+msgid "Unable to add filesystem-specific ACL %s to %s"
+msgstr "重置为默认级别权限"
+
+#: ../src/msec/libmsec.py:917
+#, fuzzy
+msgid "Error changing acl on %s: %s"
+msgstr "卸载 %s 出错: %s"
+
+#: ../src/msec/libmsec.py:919
+msgid "Wrong acl of %s"
+msgstr ""
+
+#: ../src/msec/libmsec.py:936
 msgid "bad permissions for '%s': '%s'"
 msgstr ""
 
-#: ../src/msec/libmsec.py:939
+#: ../src/msec/libmsec.py:961
 msgid "Non local file: \"%s\". Nothing changed."
 msgstr ""
 
-#: ../src/msec/libmsec.py:981
+#: ../src/msec/libmsec.py:1006
 #, fuzzy
 msgid "Checking paths: %s"
 msgstr "正在检查 %s"
@@ -606,7 +625,7 @@ msgstr ""
 msgid "Saving file permissions to '%s' level."
 msgstr "更改 %s 的权限"
 
-#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:160
+#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
 #, fuzzy
 msgid "Unable to save config!"
 msgstr "无法装入图像文件 %s"
@@ -616,64 +635,64 @@ msgstr "无法装入图像文件 %s"
 msgid "Unable to save file system permissions!"
 msgstr "重置为默认级别权限"
 
-#: ../src/msec/msecgui.py:53
+#: ../src/msec/msecgui.py:55
 msgid ""
 "<big><b>Choose security level</b></big>\n"
 "This application allows you to configure your system security. If you wish\n"
 "to activate it, choose the appropriate security level: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:59
+#: ../src/msec/msecgui.py:61
 msgid ""
 "This profile configures a reasonably safe set of security features. It is "
 "the suggested level for Desktop. If unsure which profile to use, use this "
 "one."
 msgstr ""
 
-#: ../src/msec/msecgui.py:60
+#: ../src/msec/msecgui.py:62
 msgid ""
 "This profile is focused on netbooks, laptops or low-end devices, which are "
 "only accessed by local users and run on batteries."
 msgstr ""
 
-#: ../src/msec/msecgui.py:62
+#: ../src/msec/msecgui.py:64
 msgid ""
 "This profile is configured to provide maximum security, even at the cost of "
 "limiting the remote access to the system. This level is suggested for "
 "security-concerned systems and servers. "
 msgstr ""
 
-#: ../src/msec/msecgui.py:64
+#: ../src/msec/msecgui.py:66
 msgid ""
 "This profile is targeted on local network servers, which do not receive "
 "accesses from unauthorized Internet users."
 msgstr ""
 
-#: ../src/msec/msecgui.py:66
+#: ../src/msec/msecgui.py:68
 msgid ""
 "This profile is provided for servers which are intended to be accessed by "
 "unauthorized Internet users."
 msgstr ""
 
-#: ../src/msec/msecgui.py:67
+#: ../src/msec/msecgui.py:69
 msgid ""
 "This profile is intended for the users who do not rely on msec to change "
 "system settings, and use it for periodic checks only. It configures all "
 "periodic checks to run once a day."
 msgstr ""
 
-#: ../src/msec/msecgui.py:68
+#: ../src/msec/msecgui.py:70
 msgid ""
 "This profile is similar to the 'audit_daily' profile, but it runs all checks "
 "weekly."
 msgstr ""
 
-#: ../src/msec/msecgui.py:75
+#: ../src/msec/msecgui.py:77
 #, fuzzy
 msgid "Custom security level."
 msgstr "系统安全"
 
-#: ../src/msec/msecgui.py:78
+#: ../src/msec/msecgui.py:80
 msgid ""
 "<big><b>System security options</b></big>\n"
 "These options control the local security configuration, such as the login "
@@ -683,7 +702,7 @@ msgid ""
 "permissions.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:83
+#: ../src/msec/msecgui.py:85
 msgid ""
 "<big><b>Network security options</b></big>\n"
 "These options define the network security against remote threats, "
@@ -691,14 +710,14 @@ msgid ""
 "and breakin attempts.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:87
+#: ../src/msec/msecgui.py:89
 msgid ""
 "<big><b>Periodic security checks</b></big>\n"
 "These options configure the security checks that should be executed "
 "periodically.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:90
+#: ../src/msec/msecgui.py:92
 msgid ""
 "<big><b>Exceptions</b></big>\n"
 "Here you can configure the allowed exceptions for msec periodic security\n"
@@ -706,7 +725,7 @@ msgid ""
 "for each check. Note that each exception is parsed as a regexp."
 msgstr ""
 
-#: ../src/msec/msecgui.py:95
+#: ../src/msec/msecgui.py:97
 msgid ""
 "<big><b>File permissions</b></big>\n"
 "These options allow to fine-tune system permissions for important files and "
@@ -718,314 +737,382 @@ msgid ""
 "changing them to the specified values when a change is detected.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:101
+#: ../src/msec/msecgui.py:103
 msgid "Save and apply new configuration?"
 msgstr "保存并应用新配置吗？"
 
-#: ../src/msec/msecgui.py:134
+#: ../src/msec/msecgui.py:154
 msgid "Unable to load configuration for level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:140
+#: ../src/msec/msecgui.py:160
 msgid "Unable to load permissions for level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:173
+#: ../src/msec/msecgui.py:193
 msgid "_File"
 msgstr "文件(_F)"
 
-#: ../src/msec/msecgui.py:175
+#: ../src/msec/msecgui.py:195
 msgid "_Save configuration"
 msgstr "保存配置(_S)"
 
-#: ../src/msec/msecgui.py:180
+#: ../src/msec/msecgui.py:200
 msgid "_Quit"
 msgstr "退出(_Q)"
 
-#: ../src/msec/msecgui.py:182 ../src/msec/msecgui.py:184
+#: ../src/msec/msecgui.py:202 ../src/msec/msecgui.py:204
 msgid "_Help"
 msgstr "帮助(_H)"
 
-#: ../src/msec/msecgui.py:185
+#: ../src/msec/msecgui.py:205
 msgid "_About"
 msgstr "关于(_A)"
 
-#: ../src/msec/msecgui.py:212
+#: ../src/msec/msecgui.py:232
 msgid "MSEC: System Security and Audit"
 msgstr "MSEC: 系统安全审计"
 
-#: ../src/msec/msecgui.py:225
+#: ../src/msec/msecgui.py:245
 msgid "Overview"
 msgstr "概要"
 
-#: ../src/msec/msecgui.py:226
+#: ../src/msec/msecgui.py:246
 msgid "Security settings"
 msgstr "安全设置"
 
-#: ../src/msec/msecgui.py:235
+#: ../src/msec/msecgui.py:255
 msgid "Basic security"
 msgstr "基本安全"
 
-#: ../src/msec/msecgui.py:236
+#: ../src/msec/msecgui.py:256
 msgid "System security"
 msgstr "系统安全"
 
-#: ../src/msec/msecgui.py:237
+#: ../src/msec/msecgui.py:257
 msgid "Network security"
 msgstr "网络安全"
 
-#: ../src/msec/msecgui.py:238
+#: ../src/msec/msecgui.py:258 ../src/msec/msecgui.py:649
 msgid "Periodic checks"
 msgstr "定期检查"
 
-#: ../src/msec/msecgui.py:239
+#: ../src/msec/msecgui.py:259
 msgid "Exceptions"
 msgstr "例外"
 
-#: ../src/msec/msecgui.py:240 ../src/msec/msecgui.py:1118
+#: ../src/msec/msecgui.py:260 ../src/msec/msecgui.py:1250
 msgid "Permissions"
 msgstr "权限"
 
-#: ../src/msec/msecgui.py:280
+#: ../src/msec/msecgui.py:300
 msgid "MSEC option changes"
 msgstr "MSEC 选项更改"
 
-#: ../src/msec/msecgui.py:280
+#: ../src/msec/msecgui.py:300
 msgid "option"
 msgstr "选项"
 
-#: ../src/msec/msecgui.py:281
+#: ../src/msec/msecgui.py:301
 msgid "System permissions changes"
 msgstr "系统权限更改"
 
-#: ../src/msec/msecgui.py:281
+#: ../src/msec/msecgui.py:301
 msgid "permission check"
 msgstr "权限检查"
 
-#: ../src/msec/msecgui.py:291
+#: ../src/msec/msecgui.py:311
 msgid "changed %s <b>%s</b> (%s -> %s)"
 msgstr ""
 
-#: ../src/msec/msecgui.py:296
+#: ../src/msec/msecgui.py:316
 msgid "added %s <b>%s</b> (%s)"
 msgstr ""
 
-#: ../src/msec/msecgui.py:301
+#: ../src/msec/msecgui.py:321
 msgid "removed %s <b>%s</b>"
 msgstr ""
 
-#: ../src/msec/msecgui.py:305
+#: ../src/msec/msecgui.py:325
 msgid "no changes"
 msgstr "无更改"
 
-#: ../src/msec/msecgui.py:318 ../src/msec/msecgui.py:325
+#: ../src/msec/msecgui.py:338 ../src/msec/msecgui.py:345
 msgid "Saving changes.."
 msgstr "正在保存更改..."
 
-#: ../src/msec/msecgui.py:321
+#: ../src/msec/msecgui.py:341
 msgid "Ignore and quit"
 msgstr "忽略并退出"
 
-#: ../src/msec/msecgui.py:359
+#: ../src/msec/msecgui.py:379
 msgid "<b>%s:</b> <i>%s</i>\n"
 msgstr "<b>%s:</b> <i>%s</i>\n"
 
-#: ../src/msec/msecgui.py:366
+#: ../src/msec/msecgui.py:386
 msgid "<b>MSEC test run results:</b> <i>%s</i>"
 msgstr "<b>MSEC 测试运行结果:</b> <i>%s</i>"
 
-#: ../src/msec/msecgui.py:374
+#: ../src/msec/msecgui.py:394
 msgid "Details"
 msgstr "细节"
 
-#: ../src/msec/msecgui.py:380
+#: ../src/msec/msecgui.py:400
 msgid "MSEC messages (%s): %d"
 msgstr ""
 
-#: ../src/msec/msecgui.py:394
+#: ../src/msec/msecgui.py:414
 msgid "Details (%d changes).."
 msgstr "细节(%d 处更改)..."
 
-#: ../src/msec/msecgui.py:447
+#: ../src/msec/msecgui.py:467
 msgid "No base msec level specified, using '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:450
+#: ../src/msec/msecgui.py:470
 msgid "Detected base msec level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:478
+#: ../src/msec/msecgui.py:498
 msgid "Security Option"
 msgstr "安全选项"
 
-#: ../src/msec/msecgui.py:488 ../src/msec/msecgui.py:715
+#: ../src/msec/msecgui.py:508 ../src/msec/msecgui.py:846
 msgid "Description"
 msgstr "描述"
 
-#: ../src/msec/msecgui.py:493
+#: ../src/msec/msecgui.py:513
 msgid "Value"
 msgstr "值"
 
-#: ../src/msec/msecgui.py:503
+#: ../src/msec/msecgui.py:523
 msgid "Invalid option '%s'!"
 msgstr "无效的选项“%s”!"
 
-#: ../src/msec/msecgui.py:578
+#: ../src/msec/msecgui.py:593
 msgid "Firewall"
 msgstr "防火墙"
 
-#: ../src/msec/msecgui.py:587 ../src/msec/msecgui.py:622
+#: ../src/msec/msecgui.py:600 ../src/msec/msecgui.py:642
 msgid "Configure"
 msgstr "配置"
 
-#: ../src/msec/msecgui.py:599
+#: ../src/msec/msecgui.py:608
+msgid "Updates"
+msgstr "更新"
+
+#: ../src/msec/msecgui.py:614
+msgid "Update now"
+msgstr "立即更新"
+
+#: ../src/msec/msecgui.py:621
 msgid "Security"
 msgstr "安全"
 
-#: ../src/msec/msecgui.py:605
+#: ../src/msec/msecgui.py:624
 msgid "Msec is disabled"
 msgstr "Msec 已禁用"
 
-#: ../src/msec/msecgui.py:608
+#: ../src/msec/msecgui.py:627
 msgid "Msec is enabled"
 msgstr "Msec 已启用"
 
-#: ../src/msec/msecgui.py:609
+#: ../src/msec/msecgui.py:628
 msgid "Base security level: '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:617
+#: ../src/msec/msecgui.py:636
 msgid "Custom settings: %d"
 msgstr "自定义设置：%d"
 
-#: ../src/msec/msecgui.py:634
-msgid "Updates"
-msgstr "更新"
+#: ../src/msec/msecgui.py:657
+msgid "Never"
+msgstr ""
 
-#: ../src/msec/msecgui.py:643
-msgid "Update now"
-msgstr "立即更新"
+#: ../src/msec/msecgui.py:658
+msgid "Check: %s. Last run: %s"
+msgstr ""
+
+#: ../src/msec/msecgui.py:663
+msgid "Show results"
+msgstr ""
+
+#: ../src/msec/msecgui.py:669
+msgid "Run now"
+msgstr ""
+
+#: ../src/msec/msecgui.py:690
+#, fuzzy
+msgid "Unable to read log file: %s"
+msgstr "无法装入图像文件 %s"
+
+#: ../src/msec/msecgui.py:691
+#, fuzzy
+msgid "Periodic check results"
+msgstr "定期检查"
+
+#: ../src/msec/msecgui.py:722
+msgid ""
+"Do you want to run periodic check <b>%s</b>? Please note that it could take "
+"a considerable time to finish."
+msgstr ""
+
+#: ../src/msec/msecgui.py:731 ../src/msec/msecgui.py:739
+msgid "Please wait, running checks..."
+msgstr ""
+
+#: ../src/msec/msecgui.py:742
+msgid "Please wait, this might take a few minutes."
+msgstr ""
+
+#: ../src/msec/msecgui.py:771
+msgid "Periodic check was executed successfully!"
+msgstr ""
 
-#: ../src/msec/msecgui.py:675
+#: ../src/msec/msecgui.py:774
+msgid "An error occurred while running periodic check."
+msgstr ""
+
+#: ../src/msec/msecgui.py:806
 msgid "Enable MSEC tool"
 msgstr "允许 MSEC 工具"
 
-#: ../src/msec/msecgui.py:682
+#: ../src/msec/msecgui.py:813
 msgid "Select the base security level"
 msgstr "选择基础安全级别"
 
-#: ../src/msec/msecgui.py:705
+#: ../src/msec/msecgui.py:836
 msgid "Level name"
 msgstr "级别名称"
 
-#: ../src/msec/msecgui.py:761
+#: ../src/msec/msecgui.py:892
 msgid "Send security alerts by email to:"
 msgstr "通过电子邮件发送安全警告:"
 
-#: ../src/msec/msecgui.py:783
+#: ../src/msec/msecgui.py:914
 msgid "Display security alerts on desktop"
 msgstr "在桌面上显示安全警告"
 
-#: ../src/msec/msecgui.py:967
+#: ../src/msec/msecgui.py:1098
 msgid "Enable periodic security checks"
 msgstr "启用定期安全检查"
 
-#: ../src/msec/msecgui.py:1029
+#: ../src/msec/msecgui.py:1160
 msgid "Security check"
 msgstr "安全检查"
 
-#: ../src/msec/msecgui.py:1035
+#: ../src/msec/msecgui.py:1166
 msgid "Exception"
 msgstr "例外"
 
-#: ../src/msec/msecgui.py:1056 ../src/msec/msecgui.py:1175
+#: ../src/msec/msecgui.py:1187 ../src/msec/msecgui.py:1314
 msgid "Add a rule"
 msgstr "添加规则"
 
-#: ../src/msec/msecgui.py:1061 ../src/msec/msecgui.py:1180
+#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
 msgid "Delete"
 msgstr "删除"
 
-#: ../src/msec/msecgui.py:1100
+#: ../src/msec/msecgui.py:1232
 msgid "Path"
 msgstr "路径"
 
-#: ../src/msec/msecgui.py:1106
+#: ../src/msec/msecgui.py:1238
 msgid "User"
 msgstr "用户"
 
-#: ../src/msec/msecgui.py:1112
+#: ../src/msec/msecgui.py:1244
 msgid "Group"
 msgstr "组"
 
-#: ../src/msec/msecgui.py:1126
+#: ../src/msec/msecgui.py:1258
 msgid "Enforce"
 msgstr "强制"
 
-#: ../src/msec/msecgui.py:1279
+#: ../src/msec/msecgui.py:1266
+msgid "Acl"
+msgstr ""
+
+#: ../src/msec/msecgui.py:1419
 msgid "Editing exception"
 msgstr "编辑例外"
 
-#: ../src/msec/msecgui.py:1284
+#: ../src/msec/msecgui.py:1424
 msgid "Adding new exception"
 msgstr "添加新例外"
 
-#: ../src/msec/msecgui.py:1291
+#: ../src/msec/msecgui.py:1431
 msgid ""
 "Editing exception. Please select the correspondent msec check and exception "
 "value\n"
 msgstr "编辑例外。请选择相应的 msec 检查及例外值\n"
 
-#: ../src/msec/msecgui.py:1298
+#: ../src/msec/msecgui.py:1438
 msgid "Check: "
 msgstr "检查: "
 
-#: ../src/msec/msecgui.py:1313
+#: ../src/msec/msecgui.py:1453
 msgid "Exception: "
 msgstr "例外: "
 
-#: ../src/msec/msecgui.py:1348
+#: ../src/msec/msecgui.py:1489
 msgid "Changing permissions for %s"
 msgstr "更改 %s 的权限"
 
-#: ../src/msec/msecgui.py:1355
+#: ../src/msec/msecgui.py:1497
 msgid "Adding new permission check"
 msgstr "添加新的权限检查"
 
-#: ../src/msec/msecgui.py:1367
-msgid ""
-"Changing permissions on <b>%s</b>\n"
-"Please specify new permissions, or use 'current' to keep current "
-"permissions.\n"
-msgstr ""
-"更改 <b>%s</b> 的权限\n"
-"请指定新权限，或者使用“current”保持当前权限。\n"
+#: ../src/msec/msecgui.py:1509
+#, fuzzy
+msgid "Changing permissions on <b>%s</b>"
+msgstr "更改 %s 的权限"
 
-#: ../src/msec/msecgui.py:1367
+#: ../src/msec/msecgui.py:1509
 msgid "new file"
 msgstr "新文件"
 
-#: ../src/msec/msecgui.py:1375
+#: ../src/msec/msecgui.py:1521
 msgid "File: "
 msgstr "文件: "
 
-#: ../src/msec/msecgui.py:1383
+#: ../src/msec/msecgui.py:1530
+#, fuzzy
+msgid ""
+"Please specify new file owner and permissions, or use 'current' to keep "
+"current settings."
+msgstr ""
+"更改 <b>%s</b> 的权限\n"
+"请指定新权限，或者使用“current”保持当前权限。\n"
+
+#: ../src/msec/msecgui.py:1537
 msgid "User: "
 msgstr "用户: "
 
-#: ../src/msec/msecgui.py:1391
+#: ../src/msec/msecgui.py:1548
 msgid "Group: "
 msgstr "组: "
 
-#: ../src/msec/msecgui.py:1399
+#: ../src/msec/msecgui.py:1559
 msgid "Permissions: "
 msgstr "权限: "
 
-#: ../src/msec/msecgui.py:1456
+#: ../src/msec/msecgui.py:1568
+msgid ""
+"To enforce additional ACL on file, specify them in the following format:\n"
+"user1:acl,user2:acl\n"
+"Refer to 'man setfacl' for details."
+msgstr ""
+
+#: ../src/msec/msecgui.py:1575
+msgid "ACL: "
+msgstr ""
+
+#: ../src/msec/msecgui.py:1642
 msgid "Select new value for %s"
 msgstr "选择 %s 的新值"
 
-#: ../src/msec/msecgui.py:1465
+#: ../src/msec/msecgui.py:1651
 #, fuzzy
 msgid ""
 "<i>%s</i>\n"
@@ -1039,7 +1126,7 @@ msgstr ""
 "\t%s标准级别值:\t<i>%s</i>%s\n"
 "\t%s安全级别值:\t\t<i>%s</i>%s\n"
 
-#: ../src/msec/msecgui.py:1475
+#: ../src/msec/msecgui.py:1661
 msgid "New value:"
 msgstr "新值:"