blob: 8b68d530d7276d867d2d4380bd8e9d05130d3066 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
Banana Pro SBC
==========
Short
-----
* [Board Informations](#SBC_INFO)
* [U-Boot](#UBOOT_INFO)
* [Kernel](#KERNEL_INFO)
<a id="SBC_INFO"/>
# About the Banana Pro SBC from LeMaker
## External links
http://wiki.lemaker.org/BananaPro/Pi:Building_u-boot,_script.bin_and_linux-kernel#Building_the_kernel
http://wiki.lemaker.org/BananaPro/Pi:Setting_up_the_bootable_SD_card
https://sites.google.com/site/manisbutareed/bringing-my-beagles-to-heel/selected-annotated-u-boot-commands
https://linux-sunxi.org/Mainline_Kernel_Howto
https://linux-sunxi.org/Manual_build_howto#Setting_up_the_boot_partition
https://stackoverflow.com/questions/28891221/uenv-txt-vs-boot-scr
https://github.com/linux-sunxi/u-boot-sunxi/wiki
## LeMaker BPS (board package support)
git clone --recursive https://github.com/LeMaker/lemaker-bsp.git
./fex2bin ../sunxi-boards/sys_config/a20/BananaPro.fex ../../mageia4arm/bananaPro/script.bin
<a id="UBOOT_INFO"/>
# About U-Boot
The mainline U-Boot is used for this port.
## Mainline
```
CONFIG_PATH=~/workspaces/mageia4arm/platforms/bananaPro
git clone https://gitlab.denx.de/u-boot/u-boot
cd u-boot
make CROSS_COMPILE=arm-linux-gnu- Bananapro_defconfig
cp ${CONFIG_PATH}/UBOOT.config ./.config
#Just modify few unimportant things, like prompt, name, ...
make ARCH=arm CROSS_COMPILE=arm-linux-gnu- -j8
make ARCH=arm CROSS_COMPILE=arm-linux-gnu-
#cp ./u-boot.dtb ${CONFIG_PATH}/sun7i-a20-bananapro.dtb
cp -f ./u-boot.dtb ${CONFIG_PATH}/u-boot.dtb
cp -f ./arch/arm/dts/sun7i-a20-bananapro.dtb ${CONFIG_PATH}/sun7i-a20-bananapro.dtb
cp -f ./u-boot-sunxi-with-spl.bin ${CONFIG_PATH}/u-boot-sunxi-with-spl.bin
#Inside "specialFunctions.sh"
#dd if=${CONFIG_PATH}/u-boot-sunxi-with-spl.bin of=${DEVICE} bs=1024 seek=8
echo '
setenv KERNEL_FILE /boot/vmlinuz
setenv INIT_FILE /boot/initrd.img
#setenv DTB_FILE /boot/sun7i-a20-bananapro.dtb
setenv DTB_FILE /boot/u-boot.dtb
setenv KERNEL_ADDR 0x40008000
#setenv INIT_ADDR 0x45000000
setenv INIT_ADDR -
setenv DTB_ADDR 0x48000000
ext4load mmc 0:1 ${KERNEL_ADDR} ${KERNEL_FILE}
#ext4load mmc 0:1 ${INIT_ADDR} ${INIT_FILE}
ext4load mmc 0:1 ${DTB_ADDR} ${DTB_FILE}
setenv bootargs console=ttyS0,115200 disp.screen0_output_mode=EDID:1024x768p50 hdmi.audio=EDID:0 root=/dev/mmcblk0p1 rootfstype=ext4 elevator=deadline rootwait
#printenv
bootz ${KERNEL_ADDR} ${INIT_ADDR} ${DTB_ADDR}
#Compile boot.scr : mkimage -C none -A arm -T script -d "${CONFIG_PATH}/boot.cmd" "${CONFIG_PATH}/boot.scr"
' >${CONFIG_PATH}/boot.cmd
```
mkimage -C none -A arm -T script -d ${CONFIG_PATH}/boot.cmd ${CONFIG_PATH}/boot.scr
## UBoot Sunxi From LeMaker
Obsolet, see 'LeMaker BPS (board package support)'.
## UBoot Sunxi
Generic u-boot for sunxi
```
git clone https://github.com/linux-sunxi/u-boot-sunxi
make CROSS_COMPILE=arm-linux-gnu- Bananapro_config
make CROSS_COMPILE=arm-linux-gnu- -j8
make CROSS_COMPILE=arm-linux-gnu-
#Need network support to give the MAC address.
#Do not activate boot timing.
#Default conf use bootz and dtb tree.
```
## Default LeMaker script
```
setenv bootargs console=ttyS0,115200 noinitrd
disp.screen0_output_mode=EDID:1280x720p50 init=/init
root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
fatload mmc 0 0x43000000 script.bin
fatload mmc 0 0x48000000 uImage
bootm 0x48000000
```
## DTB from Linux Mainline
```
git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git --depth=1
make ARCH=arm CROSS_COMPILE=arm-linux-gnu- sunxi_defconfig
ARCH=arm CROSS_COMPILE=arm-linux-gnu- make -j8 dtbs
cp ./arch/arm/boot/dts/sun7i-a20-bananapro.dtb ./sun7i-a20-bananapro.dtb
```
<a id="KERNEL_INFO"/>
# About the Kernel
Not Written.
## Generate symlink
```
#Generating a symbolic relative link to the "last" kernel :
ln -r -s ./vmlinuz-5.2.13-desktop-2.mga7 ./vmlinuz
rm -f ./vmlinuz && ln -r -s ./vmlinuz-5.3.1-desktop-2.mga7 ./vmlinuz
```
## Commands used :
./create_arm_img_urpmi.sh --clean --config bananaPro --build-path ./build
./create_arm_img_urpmi.sh --all --target bananaPro --size 2 --tainted --nonfree --build-path ./build --config bananaPro 2>&1 | tee -a ./log/creation.log
dd if=./build/Mageia-7-bananaPro1.img | pv | dd of=/dev/mmcblk0 ; sync
|
