path: root/platforms/bananaPro/INFO/FirstBoot

U-Boot 2019.10-rc4-00037-gdac51e9aaf (Oct 13 2019 - 12:47:46 +0200) Allwinner Technology For Mageia

CPU:   Allwinner A20 (SUN7I)
Model: LeMaker Banana Pro
I2C:   ready
DRAM:  1 GiB
MMC:   mmc@1c0f000: 0, mmc@1c12000: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **

** Unable to read "/boot/uboot.env" from mmc0:1 **
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@1c50000
starting USB...
No working controllers found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
$ setenv bootargs console=ttyS0,115200 disp.screen0_output_mode=EDID:1024x768p50 hdmi.audio=EDID:0 root=/dev/mmcblk0p1 rootfstype=ext4 elevator=deadline rootwait init=/bin/sh
$ ext4load mmc 0:1 0x40008000 /boot/vmlinuz
3175896 bytes read in 176 ms (17.2 MiB/s)
$ ext4load mmc 0:1 0x48000000 /boot/sun7i-a20-bananapro.dtb
25166 bytes read in 5 ms (4.8 MiB/s)
$ bootz 0x40008000 - 0x48000000
## Flattened Device Tree blob at 48000000
   Booting using the fdt blob at 0x48000000
   Loading Device Tree to 49ff6000, end 49fff24d ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.0-rc3 (jibz@jabztop) (gcc version 8.2.1 20181105 (Red Hat Cross 8.2.1-2) (GCC)) #1 SMP Fri Oct 18 19:47:18 CEST 2019
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: LeMaker Banana Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB
[    0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30604 r8192 d22644 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: console=ttyS0,115200 disp.screen0_output_mode=EDID:1024x768p50 hdmi.audio=EDID:0 root=/dev/mmcblk0p1 rootfstype=ext4 elevator=deadline rootwait init=/bin/sh
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 930964K/1048576K available (6144K kernel code, 436K rwdata, 1696K rodata, 1024K init, 242K bss, 19308K reserved, 98304K cma-reserved, 262144K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x2ac/0x43c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000425] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000735] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
[    0.000992] Console: colour dummy device 80x30
[    0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001063] pid_max: default: 32768 minimum: 301
[    0.001221] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001240] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002070] CPU: Testing write buffer coherency: ok
[    0.002506] /cpus/cpu@0 missing clock-frequency property
[    0.002526] /cpus/cpu@1 missing clock-frequency property
[    0.002540] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003143] Setting up static identity map for 0x40100000 - 0x40100060
[    0.003302] rcu: Hierarchical SRCU implementation.
[    0.003867] smp: Bringing up secondary CPUs ...
[    0.014648] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.014807] smp: Brought up 1 node, 2 CPUs
[    0.014824] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.014831] CPU: All CPU(s) started in HYP mode.
[    0.014836] CPU: Virtualization extensions available.
[    0.015531] devtmpfs: initialized
[    0.021708] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.022017] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.022045] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.025657] pinctrl core: initialized pinctrl subsystem
[    0.026814] NET: Registered protocol family 16
[    0.028296] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.029580] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.029594] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.048261] SCSI subsystem initialized
[    0.048812] usbcore: registered new interface driver usbfs
[    0.048888] usbcore: registered new interface driver hub
[    0.048956] usbcore: registered new device driver usb
[    0.049224] pps_core: LinuxPPS API ver. 1 registered
[    0.049233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.049254] PTP clock support registered
[    0.049530] Advanced Linux Sound Architecture Driver Initialized.
[    0.050628] clocksource: Switched to clocksource arch_sys_counter
[    0.058779] thermal_sys: Registered thermal governor 'step_wise'
[    0.059261] NET: Registered protocol family 2
[    0.059845] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.059881] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.059973] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.060110] TCP: Hash tables configured (established 8192 bind 8192)
[    0.060250] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.060317] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.060564] NET: Registered protocol family 1
[    0.061384] RPC: Registered named UNIX socket transport module.
[    0.061401] RPC: Registered udp transport module.
[    0.061408] RPC: Registered tcp transport module.
[    0.061414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.062107] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    0.062377] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.064002] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    0.071886] NFS: Registering the id_resolver key type
[    0.071935] Key type id_resolver registered
[    0.071942] Key type id_legacy registered
[    0.072048] bounce: pool size: 64 pages
[    0.072097] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.072109] io scheduler mq-deadline registered
[    0.072116] io scheduler kyber registered
[    0.073497] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    0.077202] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.137898] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.139939] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[    0.141080] printk: console [ttyS0] disabled
[    0.161295] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 48, base_baud = 1500000) is a U6_16550A
[    0.784468] printk: console [ttyS0] enabled
[    0.789146] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[    0.819777] 1c29000.serial: ttyS1 at MMIO 0x1c29000 (irq = 49, base_baud = 1500000) is a U6_16550A
[    0.829211] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pi not found, using dummy regulator
[    0.861679] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 50, base_baud = 1500000) is a U6_16550A
[    0.970676] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    0.978165] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    0.984083] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    0.993059] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc 
[    1.002121] scsi host0: ahci-sunxi
[    1.005980] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 36
[    1.015879] libphy: Fixed MDIO Bus: probed
[    1.019985] CAN device driver interface
[    1.024458] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    1.034293] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[    1.040697] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[    1.046721] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    1.052495] sun7i-dwmac 1c50000.ethernet: no reset control found
[    1.059308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.065891] ehci-platform: EHCI generic platform driver
[    1.071569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.077770] ohci-platform: OHCI generic platform driver
[    1.085267] sunxi-rtc 1c20d00.rtc: registered as rtc0
[    1.090452] i2c /dev entries driver
[    1.095007] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[    1.115112] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[    1.125008] axp20x-regulator axp20x-regulator: regulators node not found
[    1.131782] ldo1: supplied by regulator-dummy
[    1.136388] ldo2: supplied by regulator-dummy
[    1.141466] ldo3: supplied by regulator-dummy
[    1.146452] ldo4: supplied by regulator-dummy
[    1.151025] ldo5: supplied by regulator-dummy
[    1.156031] dcdc2: supplied by regulator-dummy
[    1.161110] dcdc3: supplied by regulator-dummy
[    1.166712] axp20x-i2c 0-0034: AXP20X driver loaded
[    1.173137] Registered IR keymap rc-empty
[    1.177258] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
[    1.184126] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1
[    1.191753] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[    1.198700] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.209519] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    1.220108] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.250231] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.258450] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq
[    1.287129] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB
[    1.294749] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[    1.305077] sun4i-ss 1c15000.crypto-engine: Die ID 0
[    1.313860] usbcore: registered new interface driver usbhid
[    1.319466] usbhid: USB HID core driver
[    1.326731] random: fast init done
[    1.331040] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
[    1.340586] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    1.347709] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.352408] ata1: SATA link down (SStatus 0 SControl 300)
[    1.358763] mmc0: new high speed SDHC card at address 5048
[    1.367556] mmcblk0: mmc0:5048 SD32G 29.0 GiB 
[    1.371915] NET: Registered protocol family 17
[    1.376503] can: controller area network core (rev 20170425 abi 9)
[    1.378652] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.382856] NET: Registered protocol family 29
[    1.389744] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.392699] can: raw protocol (rev 20170425)
[    1.392705] can: broadcast manager protocol (rev 20170425 t)
[    1.392718] can: netlink gateway (rev 20190810) max_hops=1
[    1.399675] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.402762] Key type dns_resolver registered
[    1.411270] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.413821] Registering SWP/SWPB emulation handler
[    1.421008]  mmcblk0: p1
[    1.449019] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    1.450686] mmc1: new high speed SDIO card at address 0001
[    1.458808] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[    1.470455] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[    1.476506] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    1.482271] sun7i-dwmac 1c50000.ethernet: no reset control found
[    1.600858] sun7i-dwmac 1c50000.ethernet: Version ID not available
[    1.607048] sun7i-dwmac 1c50000.ethernet:    DWMAC1000
[    1.612056] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
[    1.619270] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[    1.624941] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[    1.630772] libphy: stmmac: probed
[    1.636122] ehci-platform 1c14000.usb: EHCI Host Controller
[    1.641773] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    1.649903] ehci-platform 1c14000.usb: irq 33, io mem 0x01c14000
[    1.690630] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    1.697620] hub 1-0:1.0: USB hub found
[    1.701450] hub 1-0:1.0: 1 port detected
[    1.706323] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.711989] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    1.720027] ehci-platform 1c1c000.usb: irq 37, io mem 0x01c1c000
[    1.750644] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.757604] hub 2-0:1.0: USB hub found
[    1.761437] hub 2-0:1.0: 1 port detected
[    1.766292] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    1.772966] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[    1.781032] ohci-platform 1c14400.usb: irq 34, io mem 0x01c14400
[    1.855472] hub 3-0:1.0: USB hub found
[    1.859271] hub 3-0:1.0: 1 port detected
[    1.864156] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.870844] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    1.879375] ohci-platform 1c1c400.usb: irq 38, io mem 0x01c1c400
[    1.955550] hub 4-0:1.0: USB hub found
[    1.959351] hub 4-0:1.0: 1 port detected
[    1.963812] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T00:09:44 UTC (584)
[    1.972321] ALSA device list:
[    1.975295]   #0: sun4i-codec
[    1.982608] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
[    1.989923] EXT4-fs (mmcblk0p1): write access will be enabled during recovery
[    2.174966] EXT4-fs (mmcblk0p1): recovery complete
[    2.187141] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    2.195367] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    2.204203] devtmpfs: mounted
[    2.208337] Freeing unused kernel memory: 1024K
[    2.213053] Run /bin/sh as init process
sh: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
sh-4.4# passwd
Changing password for user root.
New password: 
Retype new password: 
passwd: Authentication token manipulation error
sh-4.4#
[   32.490656] vcc3v0: disabling
[   32.493642] vcc5v0: disabling
sh-4.4# echo ${?}
1
[  283.211564] random: crng init done
sh-4.4# mount -o remount,rw /dev/mmcblk0p1
[  378.103283] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
sh-4.4# passwd
Changing password for user root.
New password: 
Retype new password: 
passwd: all authentication tokens updated successfully.
sh-4.4# passwd banana
passwd: Unknown user name 'banana'.
sh-4.4# cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/sh
daemon:x:2:2:daemon:/sbin:/bin/sh
adm:x:3:4:adm:/var/adm:/bin/sh
lp:x:4:7:lp:/var/spool/lpd:/bin/sh
sync:x:5:0:sync:/sbin:/bin/sync
mail:x:8:12:mail:/var/spool/mail:/bin/sh
news:x:9:13:news:/var/spool/news:/bin/sh
uucp:x:10:14:uucp:/var/spool/uucp:/bin/sh
operator:x:11:0:operator:/var:/bin/sh
games:x:12:100:games:/usr/games:/bin/sh
nobody:x:65534:65534:Nobody:/:/bin/sh
vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin
messagebus:x:999:999:system user for dbus:/:/sbin/nologin
systemd-coredump:x:998:998:systemd Core Dumper:/:/sbin/nologin
systemd-network:x:192:192:systemd Network Management:/:/sbin/nologin
systemd-resolve:x:193:193:systemd Resolver:/:/sbin/nologin
rpm:x:997:997:system user for rpm:/var/lib/rpm:/bin/false
systemd-journal-remote:x:992:992:systemd Journal Remote:/:/sbin/nologin
systemd-timesync:x:991:991:systemd Time Synchronization:/:/sbin/nologin
chrony:x:990:990:system user for chrony:/var/lib/chrony:/sbin/nologin
sshd:x:989:989:system user for openssh:/var/empty:/sbin/nologin
sh-4.4# adduser -D
GROUP=100
HOME=/home
INACTIVE=-1
EXPIRE=
SHELL=/bin/bash
SKEL=/etc/skel
CREATE_MAIL_SPOOL=no
sh-4.4# adduser -m -p *** bananaPro
sh-4.4# reboot
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
Failed to talk to init daemon.
sh-4.4# poweroff 
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
Failed to talk to init daemon.
sh-4.4# shutdown -P
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
Failed to talk to init daemon.
sh-4.4# exec /sbin/init
[  622.526387] systemd[1]: System time before build time, advancing clock.
[  622.536431] systemd[1]: Failed to lookup module alias 'autofs4': Function not implemented
[  622.564613] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=)
[  622.587159] systemd[1]: Detected architecture arm.

Welcome to Mageia 7!

[  622.623010] systemd[1]: Set hostname to <pi.raspberry>.
[  622.944256] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[  622.961881] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[  623.439308] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[  623.450328] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[  623.490959] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[  623.520874] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[  623.550915] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Started Forward Password R�…uests to Wall Directory Watch.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Listening on Journal Socket.
         Starting Remount Root and Kernel File Systems...
         Starting Setup Virtual Console...
         Starting Load legacy module configuration...
         Mounting Temporary Directory (/tmp)...
[  624.088217] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
         Starting udev Coldplug all Devices...
         Starting Load Kernel Modules...
         Starting Journal Service...
         Mounting Kernel Debug File System...
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Load legacy module configuration.
[  OK  ] Started Journal Service.
[  OK  ] Mounted Temporary Directory (/tmp).
[  OK  ] Started Load Kernel Modules.
[  OK  ] Mounted Kernel Debug File System.
         Starting Apply Kernel Variables...
         Starting Configure read-only root support...
         Starting Flush Journal to Persistent Storage...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Apply Kernel Variables.
[  624.681582] systemd-journald[149]: Received request to flush runtime journal from PID 1
[  624.691841] systemd-journald[149]: File /var/log/journal/968f86691e66406c971e0269623fd2be/system.journal corrupted or uncleanly shut down, renaming and replacing.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Configure read-only root support.
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Load/Save Random Seed...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started udev Coldplug all Devices.
         Starting Show Plymouth Boot Screen...
         Starting udev Wait for Complete Device Initialization...
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Reached target Paths.
[  OK  ] Started Forward Password R�…s to Plymouth Directory Watch.
[  OK  ] Reached target Sound Card.
[  OK  ] Started udev Wait for Complete Device Initialization.
         Starting Activation of LVM2 logical volumes...
[  OK  ] Started Activation of LVM2 logical volumes.
[  OK  ] Reached target Local Encrypted Volumes.
         Starting Activation of LVM2 logical volumes...
[  OK  ] Started Activation of LVM2 logical volumes.
         Starting Monitoring of LVM��…meventd or progress polling...
[  OK  ] Started Monitoring of LVM2�… dmeventd or progress polling.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Reconfigure the s��…em on administrator request...
         Starting Create Volatile Files and Directories...
         Starting Restore /run/initramfs on shutdown...
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Restore /run/initramfs on shutdown.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.

Mageia release 7 (Official) for armv7hl
Kernel 5.4.0-rc3 on a Dual-processor armv7l / ttyS0

pi login: bananaPro
Password: 

[  774.253303] systemd-journald[149]: Failed to set ACL on /var/log/journal/968f86691e66406c971e0269623fd2be/user-1000.journal, ignoring: Operation not supported

[bananaPro@pi ~]$ uname -a
Linux pi.raspberry 5.4.0-rc3 #1 SMP Fri Oct 18 19:47:18 CEST 2019 armv7l armv7l armv7l GNU/Linux

[bananaPro@pi ~]$ cat /etc/product.id
vendor=Mageia.Org,distribution=Mageia,type=Basic,version=7,branch=Official,release=7,arch=armv7hl,product=Default

[bananaPro@pi ~]$ 

[bananaPro@pi ~]$ poweroff 
Failed to set wall message, ignoring: Access denied
Failed to power off system via logind: Access denied
[bananaPro@pi ~]$ su
Password: 
[root@pi bananaPro]# poweroff -p
[  OK  ] Started Show Plymouth Power Off Screen.
[  OK  ] Stopped Session c3 of user bananaPro.
         Stopping Login Service...
         Stopping User Manager for UID 1000...
[  OK  ] Stopped User Manager for UID 1000.
         Stopping User Runtime Directory /run/user/1000...
[  OK  ] Unmounted /run/user/1000.
[  OK  ] Stopped User Runtime Directory /run/user/1000.
[  OK  ] Removed slice User Slice of UID 1000.
         Stopping Permit User Sessions...
         Stopping D-Bus System Message Bus...
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped target Network.
         Stopping LSB: Bring up/down networking...
         Stopping LSB: Wait for the hotplugged network to be up...
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped LSB: Wait for the hotplugged network to be up.
[  OK  ] Stopped LSB: Bring up/down networking.
         Stopping LSB: Nameserver information manager...
[  OK  ] Stopped LSB: Nameserver information manager.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped Reconfigure the system on administrator request.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped Forward Password R�…s to Plymouth Directory Watch.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped Load legacy module configuration.
[  OK  ] Stopped target Local Encrypted Volumes.
[  OK  ] Stopped Forward Password R�…uests to Wall Directory Watch.
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Update UTMP about System Boot/Shutdown...
[  OK  ] Stopped Load Kernel Modules.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped target Local File Systems.
[  OK  ] Stopped target Local File Systems (Pre).
         Stopping Monitoring of LVM��…meventd or progress polling...
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Unmounting Temporary Directory (/tmp)...
[  OK  ] Stopped Configure read-only root support.
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Unmounted Temporary Directory (/tmp).
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Swap.
[  OK  ] Reached target Shutdown.
[  OK  ] Reached target Final Step.
[  OK  ] Started Power-Off.
[  OK  ] Reached target Power-Off.
[ 4086.708299] printk: systemd-shutdow: 29 output lines suppressed due to ratelimiting
[ 4086.825713] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 4087.051321] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 4087.067963] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 4087.116729] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 4087.133466] systemd-shutdown[1]: Unmounting file systems.
[ 4087.142844] [1038]: Remounting '/' read-only in with options '(null)'.
[ 4087.170169] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 4087.183731] systemd-shutdown[1]: All filesystems unmounted.
[ 4087.189334] systemd-shutdown[1]: Deactivating swaps.
[ 4087.194880] systemd-shutdown[1]: All swaps deactivated.
[ 4087.200143] systemd-shutdown[1]: Detaching loop devices.
[ 4087.206352] systemd-shutdown[1]: All loop devices detached.
[ 4087.212126] systemd-shutdown[1]: Detaching DM devices.
[ 4087.237097] reboot: Power down
[ 4087.240199] ------------[ cut here ]------------
[ 4087.244836] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 i2c_transfer+0xf8/0x104
[ 4087.252827] No atomic I2C transfer handler for 'i2c-0'
[ 4087.257955] Modules linked in:
[ 4087.261014] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.4.0-rc3 #1
[ 4087.267703] Hardware name: Allwinner sun7i (A20) Family
[ 4087.272942] [<c010ed54>] (unwind_backtrace) from [<c010b488>] (show_stack+0x10/0x14)
[ 4087.280685] [<c010b488>] (show_stack) from [<c06a5f40>] (dump_stack+0x88/0x9c)
[ 4087.287906] [<c06a5f40>] (dump_stack) from [<c011dca8>] (__warn+0xb8/0xd4)
[ 4087.294776] [<c011dca8>] (__warn) from [<c011dd58>] (warn_slowpath_fmt+0x94/0xb8)
[ 4087.302254] [<c011dd58>] (warn_slowpath_fmt) from [<c0528bfc>] (i2c_transfer+0xf8/0x104)
[ 4087.310341] [<c0528bfc>] (i2c_transfer) from [<c0528c54>] (i2c_transfer_buffer_flags+0x4c/0x70)
[ 4087.319036] [<c0528c54>] (i2c_transfer_buffer_flags) from [<c0476d80>] (regmap_i2c_write+0x14/0x30)
[ 4087.328076] [<c0476d80>] (regmap_i2c_write) from [<c0472c1c>] (_regmap_raw_write_impl+0x580/0x62c)
[ 4087.337028] [<c0472c1c>] (_regmap_raw_write_impl) from [<c04735fc>] (regmap_write+0x3c/0x5c)
[ 4087.345459] [<c04735fc>] (regmap_write) from [<c047a2c8>] (axp20x_power_off+0x2c/0x38)
[ 4087.353373] [<c047a2c8>] (axp20x_power_off) from [<c013eb94>] (__do_sys_reboot+0x14c/0x1e0)
[ 4087.361719] [<c013eb94>] (__do_sys_reboot) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[ 4087.369798] Exception stack(0xef04ffa8 to 0xef04fff0)
[ 4087.374847] ffa0:                   00000000 00000000 fee1dead 28121969 4321fedc 1c1b8900
[ 4087.383015] ffc0: 00000000 00000000 bea9dc38 00000058 00000000 000167c0 00000000 0002b7e8
[ 4087.391181] ffe0: 00027e50 bea9db4c 00013844 b6e9f9f0
[ 4087.396225] ---[ end trace b2b0f7c04e8d5bc8 ]---