diff options
Diffstat (limited to 'rpi')
-rw-r--r-- | rpi/brcmfmac43430-sdio.txt | 66 | ||||
-rw-r--r-- | rpi/modprobe.conf | 3 | ||||
-rw-r--r-- | rpi/raspi.config | 57 | ||||
-rw-r--r-- | rpi/second_stage_install.sh | 34 |
4 files changed, 160 insertions, 0 deletions
diff --git a/rpi/brcmfmac43430-sdio.txt b/rpi/brcmfmac43430-sdio.txt new file mode 100644 index 0000000..ea4f648 --- /dev/null +++ b/rpi/brcmfmac43430-sdio.txt @@ -0,0 +1,66 @@ +# NVRAM file for BCM943430WLPTH +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0727 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0727 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +boardflags3=0x08000000 +xtalfreq=37400 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=84 +txpwrbckof=6 +cckbw202gpo=0 +legofdmbw202gpo=0x66111111 +mcsbw202gpo=0x77711111 +propbw202gpo=0xdd + +# OFDM IIR : +ofdmdigfilttype=18 +ofdmdigfilttypebe=18 +# PAPD mode: +papdmode=1 +papdvalidtest=1 +pacalidx2g=42 +papdepsoffset=-22 +papdendidx=58 + +# LTECX flags +ltecxmux=0 +ltecxpadnum=0x0102 +ltecxfnsel=0x44 +ltecxgcigpio=0x01 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG +muxenab=0x1 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 + +#VCO freq 326.4MHz +spurconfig=0x3 + +edonthd20l=-75 +edoffthd20ul=-80 diff --git a/rpi/modprobe.conf b/rpi/modprobe.conf new file mode 100644 index 0000000..7725dae --- /dev/null +++ b/rpi/modprobe.conf @@ -0,0 +1,3 @@ +alias wlan0 brcmfmac +alias eth0 smsc95xx +alias usb0 rndis_host diff --git a/rpi/raspi.config b/rpi/raspi.config new file mode 100644 index 0000000..3d9ef8d --- /dev/null +++ b/rpi/raspi.config @@ -0,0 +1,57 @@ + +# Copyright (C) 2017-2018 Daniel Tartavel-jeannot <contact@librepc.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +MAGEIA_VERSION="6" +ARM_VERSION="armv7hl" + +#target plateform (xu3-4 or rpi) +TARGET="raspi" + +# URL of the Mageia mirror used to install ( see mirrors.mageia.org ) +MIRROR="http://ftp.free.fr/mirrors/mageia.org/distrib/$MAGEIA_VERSION/$ARM_VERSION" + +# image will be created here +INSTALL_PATH="/mnt/perso/raspi-test/" + +# Build directory will be created here +BUILD_PATH="$INSTALL_PATH/build" + +#name of the image +IMAGE="Mageia-${MAGEIA_VERSION}-$TARGET.img" + +#Mount point of image's partitions +BOOT="/mnt/boot" +ROOT="/mnt/root" + +#Default user +ID_USER="user login" +PASSWORD="user password" + +#root password +ROOT_PWD="root password" + +#Hostname +HOSTNAME="$TARGET.$ID_USER" + +#Filesystem of boot partitions (default ext4 raspberry pi need vfat) +BOOTFS="vfat" + +#kernel package to install (just needed for odroid) +KERNEL="" + +#Path where the raspberry pi firmware is/will be installed +FIRMWARE_PATH="$INSTALL_PATH/" diff --git a/rpi/second_stage_install.sh b/rpi/second_stage_install.sh new file mode 100644 index 0000000..1ae2316 --- /dev/null +++ b/rpi/second_stage_install.sh @@ -0,0 +1,34 @@ +#!/bin/bash + +# Copyright (C) 2017-2018 Daniel Tartavel-jeannot <contact@librepc.com> +# + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +/usr/bin/chown :shadow /etc/shadow /etc/gshadow /etc/login.defs /etc/pam.d/chage-chfn-chsh /etc/pam.d/chpasswd-newusers /etc/pam.d/system-auth /etc/pam.d/user-group-mod /bin/passwd /bin/chage + +/usr/bin/chown :systemd-journal -R /var/log/journal + +#Install all packages you need + +/usr/sbin/urpmi --auto --no-verify-rpm basesystem chrony rng-tools man openssh-server rfkill wireless-tools bluez wpa_supplicant make dracut u-boot-tools +/usr/sbin/urpmi --urpmi-root "$BUILD_PATH" --ignorearch --no-verify-rpm --auto --split-level 200 --split-length 200 ./kernel-odroid-4.14.y-1.armv7hl.rpm + +/usr/bin/chown :chrony -R /etc/chrony.keys /var/log/chrony +/usr/bin/chown :daemon /etc/wpa_supplicant.conf +/usr/bin/chown :tty /bin/write /bin/wall +/usr/bin/chown :lock /sbin/lockdev +/usr/bin/chown :bin /sbin/traceroute +/usr/bin/chown polkitd /etc/polkit-1/rules.d + |