Update po files with the yui branch

1 files changed, 404 insertions, 275 deletions

diff --git a/po/en_GB.po b/po/en_GB.po
index 27c1605..bbc7288 100644
--- a/po/en_GB.po
+++ b/po/en_GB.po
@@ -14,7 +14,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2016-03-06 16:41+0100\n"
+"POT-Creation-Date: 2016-07-18 08:59+0200\n"
 "PO-Revision-Date: 2016-03-12 11:44+0000\n"
 "Last-Translator: Andi Chandler <andi@gowling.com>\n"
 "Language-Team: English (United Kingdom) (http://www.transifex.com/"
@@ -25,417 +25,546 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: lib/isodumper.py:91
+#: lib/isodumper.py:123
 #, python-format
 msgid "%r not known to UDisks2"
 msgstr "%r not known to UDisks2"
 
-#: lib/isodumper.py:211
-msgid "UDisks2 is not available on your system"
-msgstr "UDisks2 is not available on your system"
-
-#: lib/isodumper.py:234
+#: lib/isodumper.py:190
 msgid "Mb"
 msgstr "Mb"
 
-#: lib/isodumper.py:251 lib/isodumper.py:415
+#: lib/isodumper.py:210
 msgid "Target Device: "
 msgstr "Target Device: "
 
-#: lib/isodumper.py:275
-msgid "Backup in: "
-msgstr "Backup in: "
+#: lib/isodumper.py:232
+msgid "Backup to: "
+msgstr ""
+
+#: lib/isodumper.py:236
+msgid "Formatting confirmation"
+msgstr ""
 
-#: lib/isodumper.py:313
+#: lib/isodumper.py:241
 msgid "The device was formatted successfully."
 msgstr "The device was formatted successfully."
 
-#: lib/isodumper.py:317
+#: lib/isodumper.py:245
 msgid "An error occurred while creating a partition."
 msgstr "An error occurred while creating a partition."
 
-#: lib/isodumper.py:321
+#: lib/isodumper.py:249
 msgid "Authentication error."
 msgstr "Authentication error."
 
-#: lib/isodumper.py:325
+#: lib/isodumper.py:253
 msgid "An error occurred."
 msgstr "An error occurred."
 
-#: lib/isodumper.py:389
+#: lib/isodumper.py:290
+msgid "Backup confirmation"
+msgstr ""
+
+#: lib/isodumper.py:290
+msgid "Do you want to overwrite the file?"
+msgstr "Do you want to overwrite the file?"
+
+#: lib/isodumper.py:298
 #, python-format
 msgid ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
 msgstr ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
 
-#: lib/isodumper.py:394 share/isodumper/isodumper.glade.h:50
-msgid "Backup in:"
-msgstr "Backup in:"
+#: lib/isodumper.py:304 lib/isodumper.py:666
+msgid "Backup to:"
+msgstr ""
 
-#: lib/isodumper.py:418
+#: lib/isodumper.py:324
 msgid "The device is too small to contain the ISO file."
 msgstr "The device is too small to contain the ISO file."
 
-#: lib/isodumper.py:425
+#: lib/isodumper.py:328
+msgid "Writing confirmation"
+msgstr ""
+
+#: lib/isodumper.py:331
 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
 msgstr "The device is bigger than 32 Gb. Are you sure you want to use it?"
 
-#: lib/isodumper.py:462
+#: lib/isodumper.py:331 lib/isodumper.py:508
+msgid "Warning"
+msgstr ""
+
+#: lib/isodumper.py:356
 msgid "Unmounting all partitions of "
 msgstr "Unmounting all partitions of "
 
-#: lib/isodumper.py:464
+#: lib/isodumper.py:358
 msgid "Trying to unmount "
 msgstr "Trying to unmount "
 
-#: lib/isodumper.py:470
+#: lib/isodumper.py:362
 #, python-format
 msgid "Partition %s is busy"
 msgstr "Partition %s is busy"
 
-#: lib/isodumper.py:474
+#: lib/isodumper.py:366
 msgid " was terminated by signal "
 msgstr " was terminated by signal "
 
-#: lib/isodumper.py:474 lib/isodumper.py:479
+#: lib/isodumper.py:366 lib/isodumper.py:372
 msgid "Error, umount "
 msgstr "Error, umount "
 
-#: lib/isodumper.py:477
+#: lib/isodumper.py:370
 msgid " successfully unmounted"
 msgstr " successfully unmounted"
 
-#: lib/isodumper.py:479
+#: lib/isodumper.py:372
 msgid " returned "
 msgstr " returned "
 
-#: lib/isodumper.py:482
+#: lib/isodumper.py:376
 msgid "Execution failed: "
 msgstr "Execution failed: "
 
-#: lib/isodumper.py:490
+#: lib/isodumper.py:385
 msgid "Could not read mtab !"
 msgstr "Could not read mtab !"
 
-#: lib/isodumper.py:500 lib/isodumper.py:529
+#: lib/isodumper.py:395 lib/isodumper.py:422
 msgid "Reading error."
 msgstr "Reading error."
 
-#: lib/isodumper.py:507
-msgid "You have not the rights for writing on the device"
-msgstr "You don't have permission to write to the device"
+#: lib/isodumper.py:403
+msgid "You don't have permission to write to the device"
+msgstr ""
 
-#: lib/isodumper.py:513 lib/isodumper.py:514
+#: lib/isodumper.py:408 lib/isodumper.py:409
 msgid " to "
 msgstr " to "
 
-#: lib/isodumper.py:513
+#: lib/isodumper.py:408
 msgid "Writing "
 msgstr "Writing "
 
-#: lib/isodumper.py:514
+#: lib/isodumper.py:409
 msgid "Executing copy from "
 msgstr "Executing copy from "
 
-#: lib/isodumper.py:535 lib/isodumper.py:551 lib/isodumper.py:561
+#: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453
 msgid "Writing error."
 msgstr "Writing error."
 
-#: lib/isodumper.py:541
+#: lib/isodumper.py:436
 msgid "Wrote: "
 msgstr "Wrote: "
 
-#: lib/isodumper.py:556
+#: lib/isodumper.py:448
 msgid " successfully written to "
 msgstr " successfully written to "
 
-#: lib/isodumper.py:556 lib/isodumper.py:685
+#: lib/isodumper.py:448 lib/isodumper.py:567
 msgid "Image "
 msgstr "Image "
 
-#: lib/isodumper.py:557
+#: lib/isodumper.py:449
 msgid "Bytes written: "
 msgstr "Bytes written: "
 
-#: lib/isodumper.py:570
+#: lib/isodumper.py:461
 msgid "Checking "
 msgstr "Checking "
 
-#: lib/isodumper.py:597
+#: lib/isodumper.py:486
 msgid "SHA1 sum: "
 msgstr "SHA1 sum: "
 
-#: lib/isodumper.py:598
+#: lib/isodumper.py:487
 msgid "MD5  sum: "
 msgstr "MD5  sum: "
 
-#: polkit/org.mageia.isodumper.policy.in.h:1
-msgid "Run Isodumper"
-msgstr "Run Isodumper"
-
-#: polkit/org.mageia.isodumper.policy.in.h:2
-msgid "Authentication is required to run Isodumper"
-msgstr "Authentication is required to run Isodumper"
-
-#: share/applications/isodumper.desktop.in.h:1
-#: share/isodumper/isodumper.glade.h:1
-msgid "IsoDumper"
-msgstr "IsoDumper"
-
-#: share/applications/isodumper.desktop.in.h:2
-msgid "A GUI tool to write .img and .iso files to USB Keys"
-msgstr "A GUI tool to write .img and .iso files to USB sticks"
+#: lib/isodumper.py:496
+msgid "Success"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:2
+#: lib/isodumper.py:496
 msgid ""
-"Writing is in progress. Exiting during writing will occur that the device or "
-"the backup will be unusable.\n"
-"Are you sure you want to quit during writing?"
+"The operation completed successfully.\n"
+" You are free to unplug it now, a logfile \n"
+"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
+" you close the application."
 msgstr ""
-"Writing is in progress. Exiting during writing will make the device or the "
-"backup unusable.\n"
-"Are you sure you want to quit during writing?"
 
-#: share/isodumper/isodumper.glade.h:4
+#: lib/isodumper.py:508
 msgid ""
-"A tool for writing ISO images on a USB stick. It's a fork of usb-imagewriter."
+"Writing is in progress. Exiting during writing \n"
+"            will make the device or the backup unusable.\n"
+"            Are you sure you want to quit during writing?"
+msgstr ""
+
+#: lib/isodumper.py:520
+msgid "Error"
 msgstr ""
-"A tool for writing ISO images to a USB stick. It is a fork of usb-"
-"imagewriter."
 
-#: share/isodumper/isodumper.glade.h:5
-msgid "Select"
-msgstr "Select"
+#: lib/isodumper.py:571 lib/isodumper.py:625
+msgid "IsoDumper"
+msgstr "IsoDumper"
 
-#: share/isodumper/isodumper.glade.h:6
+#: lib/isodumper.py:571
 msgid ""
-"<b>Warning</b>\n"
-" This will <b>destroy all data</b> on the target\n"
-" device, are you sure you want to proceed ?\n"
-"\n"
-" If you say ok here, please <b>do not unplug</b>\n"
-" the device during the following operation."
+"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
+"for safely writing a bootable ISO image to a USB flash drive, an operation "
+"devious & potentially hazardous when done by hand. As a bonus, it can also "
+"back up theentire previous<BR />contents of the flash drive onto the hard "
+"disc, and restore the flash drive to its previous state subsequently.<BR /"
+">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
+"can be launched either from the menus, or a user or root console with the "
+"command 'isodumper'.<BR />For normal users, the root password is solicited; "
+"this is necessary for the program's operation. <BR />The flash drive can be "
+"inserted beforehand or once the program is started. In the latter case, a "
+"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
+"to find it once it is. <BR />(You may have to close any automatically opened "
+"File Manager window).<BR /><BR />The fields of the main window are as "
+"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
+"down list to choose from.<BR />- Write Image: to choose the source ISO image "
+"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
+"device: This button launches the operation - with a prior warning dialogue. "
+"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
+"define the name and placement of the backup image file. The current flash "
+"drive will be backed up to a disc file. Note that the entire flash drive is "
+"preserved, regardless of its actual contents; ensure that you have the "
+"necessary free disc space (the same size as the USB device). This backup "
+"file can be used later to restore the flash drive by selecting it as the "
+"source *.img file to write out.<BR />- Backup the device: launch the backup "
+"operation.<BR />- Format the device:  create an unique partition on the "
+"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
+"volume name and the format in a new dialog box.<BR />"
 msgstr ""
-"<b>Warning</b>\n"
-" This will <b>destroy all data</b> on the target\n"
-" device, are you sure you want to proceed ?\n"
-"\n"
-" If you say OK here, please <b>do not unplug</b>\n"
-" the device during the following operation."
-
-#: share/isodumper/isodumper.glade.h:12
-msgid "Do you want to overwrite the file?"
-msgstr "Do you want to overwrite the file?"
 
-#: share/isodumper/isodumper.glade.h:13
-msgid ""
-"<b>Error</b>\n"
-" Something went wrong, please see the details\n"
-" window for the exact error.\n"
-"\n"
-" The application will be closed with this window, and a logfile\n"
-" (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
+#: lib/isodumper.py:617
+msgid "Choose an image"
 msgstr ""
-"<b>Error</b>\n"
-" Something went wrong, please see the details\n"
-" window for the exact error.\n"
-"\n"
-" The application will be closed, with this window, and a logfile\n"
-" (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
-
-#: share/isodumper/isodumper.glade.h:19
-msgid "Label for the device:"
-msgstr "Label for the device:"
 
-#: share/isodumper/isodumper.glade.h:20
-msgid "FAT 32 (Windows)"
-msgstr "FAT 32 (Windows)"
+#: lib/isodumper.py:618
+msgid ""
+"Warning\n"
+"This will destroy all data on the target device,\n"
+"        are you sure you want to proceed?\n"
+"        If you say ok here, please <b>do not unplug</b>        the device "
+"during the following operation."
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:21
-msgid "The standard. The size of files are limited to 4Gb"
-msgstr "The standard. The size of files is limited to 4Gb"
+#: lib/isodumper.py:653
+msgid "Device to work on:"
+msgstr "Device to work on:"
 
-#: share/isodumper/isodumper.glade.h:22
-msgid "NTFS (Windows)"
-msgstr "NTFS (Windows)"
+#: lib/isodumper.py:657
+msgid "Write Image:"
+msgstr "Write Image:"
 
-#: share/isodumper/isodumper.glade.h:23
-msgid "To handle files bigger than 4Gb"
-msgstr "To handle files larger than 4Gb"
+#: lib/isodumper.py:663
+msgid "&Write to device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:24
-msgid "ext4 (Linux)"
-msgstr "ext4 (Linux)"
+#: lib/isodumper.py:672
+msgid "&Backup the device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:25
-msgid "Only for Linux systems"
-msgstr "Only for Linux systems"
+#: lib/isodumper.py:676
+msgid "Format the device in FAT, NTFS or ext:"
+msgstr "Format the device as FAT, NTFS or ext:"
 
-#: share/isodumper/isodumper.glade.h:26
-msgid "Isodumper - Help"
-msgstr "Isodumper - Help"
+#: lib/isodumper.py:678
+msgid "&Format the device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:27
-msgid ""
-"Mageia IsoDumper\n"
-"----------------\n"
-"This GUI program is primarily for safely writing a bootable ISO image to a "
-"USB flash drive, an operation devious & potentially hazardous when done by "
-"hand. As a bonus, it can also back up the entire previous contents of the "
-"flash drive onto the hard disc, and restore the flash drive to its previous "
-"state subsequently. It gives also a feature for formatting the USB device.\n"
-"\n"
-"IsoDumper can be launched either from the menus, or a user or root console "
-"with the command 'isodumper'. For normal users, the root password is "
-"solicited; this is necessary for the program's operation. The flash drive "
-"can be inserted beforehand or once the program is started. In the latter "
-"case, a dialogue will say that there is no flash drive inserted, and allow a "
-"'retry' to find it once it is. (You may have to close any automatically "
-"opened File Manager window).\n"
-"\n"
-"The fields of the main window are as follows:\n"
-"- Device to work on: the device of the USB flash drive, a drop-down list to "
-"choose from.\n"
-"- Write Image: to choose the source ISO image *.iso (or flash drive backup "
-"file *.img) to write out.\n"
-"- Write to device: This button launches the operation - with a prior warning "
-"dialogue. If a flash drive backup was requested, this is done first. Then "
-"(or only) the image file write. Each operation is shown in the progress bar "
-"beneath.\n"
-"- Backup in: define the name and placement of the backup image file. The "
-"current flash drive will be backed up to a disc file. Note that the entire "
-"flash drive is preserved, regardless of its actual contents; ensure that you "
-"have the necessary free disc space (the same size as the USB device). This "
-"backup file can be used later to restore the flash drive by selecting it as "
-"the source *.img file to write out.\n"
-"- Backup the device: launch the backup operation.\n"
-"- Format the device:  create an unique partition on the entire volume in the "
-"specified format in FAT, NTFS or ext. You can specify a volume name and the "
-"format in a new dialog box.\n"
-"- Details: this button shows detailed log information.\n"
-"\n"
+#: lib/isodumper.py:682
+msgid "Progression"
 msgstr ""
-"Mageia IsoDumper\n"
-"----------------\n"
-"This GUI program is primarily for safely writing a bootable ISO image to a "
-"USB flash drive, an operation devious & potentially hazardous when done by "
-"hand. As a bonus, it can also back up the entire previous contents of the "
-"flash drive onto the hard disc, and restore the flash drive to its previous "
-"state subsequently. It gives also a feature for formatting the USB device.\n"
-"\n"
-"IsoDumper can be launched either from the menus, or a user or root console "
-"with the command 'isodumper'. For normal users, the root password is "
-"solicited; this is necessary for the program's operation. The flash drive "
-"can be inserted beforehand or once the program is started. In the latter "
-"case, a dialogue will say that there is no flash drive inserted, and allow a "
-"'retry' to find it once it is. (You may have to close any automatically "
-"opened File Manager window).\n"
-"\n"
-"The fields of the main window are as follows:\n"
-"- Device to work on: the device of the USB flash drive, a drop-down list to "
-"choose from.\n"
-"- Write Image: to choose the source ISO image *.iso (or flash drive backup "
-"file *.img) to write out.\n"
-"- Write to device: This button launches the operation - with a prior warning "
-"dialogue. If a flash drive backup was requested, this is done first. Then "
-"(or only) the image file write. Each operation is shown in the progress bar "
-"beneath.\n"
-"- Backup in: define the name and placement of the backup image file. The "
-"current flash drive will be backed up to a disc file. Note that the entire "
-"flash drive is preserved, regardless of its actual contents; ensure that you "
-"have the necessary free disc space (the same size as the USB device). This "
-"backup file can be used later to restore the flash drive by selecting it as "
-"the source *.img file to write out.\n"
-"- Backup the device: launch the backup operation.\n"
-"- Format the device:  create an unique partition on the entire volume in the "
-"specified format in FAT, NTFS or ext. You can specify a volume name and the "
-"format in a new dialogue box.\n"
-"- Details: this button shows detailed log information.\n"
-"\n"
-
-#: share/isodumper/isodumper.glade.h:43
-msgid "Device to work on:"
-msgstr "Device to work on:"
 
-#: share/isodumper/isodumper.glade.h:44
-msgid "Select target device to write the image to"
-msgstr "Select target device to write the image to"
+#: lib/isodumper.py:686
+msgid "Report"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:45
-msgid "Write Image:"
-msgstr "Write Image:"
+#: lib/isodumper.py:691 lib/isodumper.py:799
+msgid "&Refresh"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:46
-msgid "Select an image file to be written to the device"
-msgstr "Select an image file to be written to the device"
+#: lib/isodumper.py:693
+msgid "&About"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:47
-msgid "Select Image"
-msgstr "Select Image"
+#: lib/isodumper.py:695
+msgid "&Help"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:48
-msgid "Write to device"
-msgstr "Write to device"
+#: lib/isodumper.py:697
+msgid "&Quit"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:49
-msgid "Create a backup of the device as image to restore it later"
-msgstr "Create a backup of the device as image to restore it later"
+#: lib/isodumper.py:703
+msgid "UDisks2 is not available on your system"
+msgstr "UDisks2 is not available on your system"
 
-#: share/isodumper/isodumper.glade.h:52
-msgid "(None)"
-msgstr "(None)"
+#: lib/isodumper.py:722
+msgid "Label for the device:"
+msgstr "Label for the device:"
 
-#: share/isodumper/isodumper.glade.h:53
-msgid "Select a folder in which to write the backup image"
-msgstr "Select a folder in which to write the backup image"
+#: lib/isodumper.py:726
+msgid "FAT 32 (Windows)"
+msgstr "FAT 32 (Windows)"
 
-#: share/isodumper/isodumper.glade.h:54
-msgid "Backup the device"
-msgstr "Backup the device"
+#: lib/isodumper.py:728
+msgid "NTFS (Windows)"
+msgstr "NTFS (Windows)"
 
-#: share/isodumper/isodumper.glade.h:55
-msgid "Format the device in FAT, NTFS or ext:"
-msgstr "Format the device as FAT, NTFS or ext:"
+#: lib/isodumper.py:730
+msgid "ext4 (Linux)"
+msgstr "ext4 (Linux)"
 
-#: share/isodumper/isodumper.glade.h:56
-msgid "Choose the format. The device will be formatted in one partition"
-msgstr "Choose the format. The device will be formatted as one partition"
+#: lib/isodumper.py:732
+msgid "Execute"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:57
-msgid "Format the device"
-msgstr "Format the device"
+#: lib/isodumper.py:733 lib/isodumper.py:800
+msgid "Cancel"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:58
-msgid "Details"
-msgstr "Details"
+#: lib/isodumper.py:790
+msgid "A tool for writing ISO images to  a device"
+msgstr ""
 
-#: share/isodumper/isodumper.glade.h:59
+#: lib/isodumper.py:798
 msgid ""
-"<b>Warning</b>\n"
-" No target devices were found. \n"
-"\n"
-" You need to plug in a USB Key\n"
-" to which the image can be written."
+"Warning\n"
+"No target devices were found.\n"
+"You need to plug in a USB Key to which the image can be written."
 msgstr ""
-"<b>Warning</b>\n"
-" No target devices were found. \n"
-"\n"
-" You need to plug in a USB stick\n"
-" to which the image can be written."
 
-#: share/isodumper/isodumper.glade.h:64
-msgid ""
-"<b>Success</b>\n"
-" The operation was successfully performed.\n"
-" \n"
-" You are free to unplug it now, a logfile\n"
-" (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
-" you close the application."
+#: polkit/org.mageia.isodumper.policy.in.h:1
+msgid "Run Isodumper"
+msgstr "Run Isodumper"
+
+#: polkit/org.mageia.isodumper.policy.in.h:2
+msgid "Authentication is required to run Isodumper"
+msgstr "Authentication is required to run Isodumper"
+
+#: share/applications/isodumper.desktop.in.h:1
+msgid "A GUI tool to write .img and .iso files to USB sticks"
 msgstr ""
-"<b>Success</b>\n"
-" The operation completed successfully.\n"
-" \n"
-" You are free to unplug it now. A log of the operation\n"
-" isodumper.log will be saved in your homedir/.isodumper/ when\n"
-" you close the application."
+
+#~ msgid ""
+#~ "<b>Success</b>\n"
+#~ " The operation was successfully performed.\n"
+#~ " \n"
+#~ " You are free to unplug it now, a logfile\n"
+#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
+#~ " you close the application."
+#~ msgstr ""
+#~ "<b>Success</b>\n"
+#~ " The operation completed successfully.\n"
+#~ " \n"
+#~ " You are free to unplug it now. A log of the operation\n"
+#~ " isodumper.log will be saved in your homedir/.isodumper/ when\n"
+#~ " you close the application."
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " No target devices were found. \n"
+#~ "\n"
+#~ " You need to plug in a USB Key\n"
+#~ " to which the image can be written."
+#~ msgstr ""
+#~ "<b>Warning</b>\n"
+#~ " No target devices were found. \n"
+#~ "\n"
+#~ " You need to plug in a USB stick\n"
+#~ " to which the image can be written."
+
+#~ msgid "Details"
+#~ msgstr "Details"
+
+#~ msgid "Format the device"
+#~ msgstr "Format the device"
+
+#~ msgid "Choose the format. The device will be formatted in one partition"
+#~ msgstr "Choose the format. The device will be formatted as one partition"
+
+#~ msgid "Backup the device"
+#~ msgstr "Backup the device"
+
+#~ msgid "Select a folder in which to write the backup image"
+#~ msgstr "Select a folder in which to write the backup image"
+
+#~ msgid "(None)"
+#~ msgstr "(None)"
+
+#~ msgid "Create a backup of the device as image to restore it later"
+#~ msgstr "Create a backup of the device as image to restore it later"
+
+#~ msgid "Write to device"
+#~ msgstr "Write to device"
+
+#~ msgid "Select Image"
+#~ msgstr "Select Image"
+
+#~ msgid "Select an image file to be written to the device"
+#~ msgstr "Select an image file to be written to the device"
+
+#~ msgid "Select target device to write the image to"
+#~ msgstr "Select target device to write the image to"
+
+#~ msgid ""
+#~ "Mageia IsoDumper\n"
+#~ "----------------\n"
+#~ "This GUI program is primarily for safely writing a bootable ISO image to "
+#~ "a USB flash drive, an operation devious & potentially hazardous when done "
+#~ "by hand. As a bonus, it can also back up the entire previous contents of "
+#~ "the flash drive onto the hard disc, and restore the flash drive to its "
+#~ "previous state subsequently. It gives also a feature for formatting the "
+#~ "USB device.\n"
+#~ "\n"
+#~ "IsoDumper can be launched either from the menus, or a user or root "
+#~ "console with the command 'isodumper'. For normal users, the root password "
+#~ "is solicited; this is necessary for the program's operation. The flash "
+#~ "drive can be inserted beforehand or once the program is started. In the "
+#~ "latter case, a dialogue will say that there is no flash drive inserted, "
+#~ "and allow a 'retry' to find it once it is. (You may have to close any "
+#~ "automatically opened File Manager window).\n"
+#~ "\n"
+#~ "The fields of the main window are as follows:\n"
+#~ "- Device to work on: the device of the USB flash drive, a drop-down list "
+#~ "to choose from.\n"
+#~ "- Write Image: to choose the source ISO image *.iso (or flash drive "
+#~ "backup file *.img) to write out.\n"
+#~ "- Write to device: This button launches the operation - with a prior "
+#~ "warning dialogue. If a flash drive backup was requested, this is done "
+#~ "first. Then (or only) the image file write. Each operation is shown in "
+#~ "the progress bar beneath.\n"
+#~ "- Backup in: define the name and placement of the backup image file. The "
+#~ "current flash drive will be backed up to a disc file. Note that the "
+#~ "entire flash drive is preserved, regardless of its actual contents; "
+#~ "ensure that you have the necessary free disc space (the same size as the "
+#~ "USB device). This backup file can be used later to restore the flash "
+#~ "drive by selecting it as the source *.img file to write out.\n"
+#~ "- Backup the device: launch the backup operation.\n"
+#~ "- Format the device:  create an unique partition on the entire volume in "
+#~ "the specified format in FAT, NTFS or ext. You can specify a volume name "
+#~ "and the format in a new dialog box.\n"
+#~ "- Details: this button shows detailed log information.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "Mageia IsoDumper\n"
+#~ "----------------\n"
+#~ "This GUI program is primarily for safely writing a bootable ISO image to "
+#~ "a USB flash drive, an operation devious & potentially hazardous when done "
+#~ "by hand. As a bonus, it can also back up the entire previous contents of "
+#~ "the flash drive onto the hard disc, and restore the flash drive to its "
+#~ "previous state subsequently. It gives also a feature for formatting the "
+#~ "USB device.\n"
+#~ "\n"
+#~ "IsoDumper can be launched either from the menus, or a user or root "
+#~ "console with the command 'isodumper'. For normal users, the root password "
+#~ "is solicited; this is necessary for the program's operation. The flash "
+#~ "drive can be inserted beforehand or once the program is started. In the "
+#~ "latter case, a dialogue will say that there is no flash drive inserted, "
+#~ "and allow a 'retry' to find it once it is. (You may have to close any "
+#~ "automatically opened File Manager window).\n"
+#~ "\n"
+#~ "The fields of the main window are as follows:\n"
+#~ "- Device to work on: the device of the USB flash drive, a drop-down list "
+#~ "to choose from.\n"
+#~ "- Write Image: to choose the source ISO image *.iso (or flash drive "
+#~ "backup file *.img) to write out.\n"
+#~ "- Write to device: This button launches the operation - with a prior "
+#~ "warning dialogue. If a flash drive backup was requested, this is done "
+#~ "first. Then (or only) the image file write. Each operation is shown in "
+#~ "the progress bar beneath.\n"
+#~ "- Backup in: define the name and placement of the backup image file. The "
+#~ "current flash drive will be backed up to a disc file. Note that the "
+#~ "entire flash drive is preserved, regardless of its actual contents; "
+#~ "ensure that you have the necessary free disc space (the same size as the "
+#~ "USB device). This backup file can be used later to restore the flash "
+#~ "drive by selecting it as the source *.img file to write out.\n"
+#~ "- Backup the device: launch the backup operation.\n"
+#~ "- Format the device:  create an unique partition on the entire volume in "
+#~ "the specified format in FAT, NTFS or ext. You can specify a volume name "
+#~ "and the format in a new dialogue box.\n"
+#~ "- Details: this button shows detailed log information.\n"
+#~ "\n"
+
+#~ msgid "Isodumper - Help"
+#~ msgstr "Isodumper - Help"
+
+#~ msgid "Only for Linux systems"
+#~ msgstr "Only for Linux systems"
+
+#~ msgid "To handle files bigger than 4Gb"
+#~ msgstr "To handle files larger than 4Gb"
+
+#~ msgid "The standard. The size of files are limited to 4Gb"
+#~ msgstr "The standard. The size of files is limited to 4Gb"
+
+#~ msgid ""
+#~ "<b>Error</b>\n"
+#~ " Something went wrong, please see the details\n"
+#~ " window for the exact error.\n"
+#~ "\n"
+#~ " The application will be closed with this window, and a logfile\n"
+#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
+#~ msgstr ""
+#~ "<b>Error</b>\n"
+#~ " Something went wrong, please see the details\n"
+#~ " window for the exact error.\n"
+#~ "\n"
+#~ " The application will be closed, with this window, and a logfile\n"
+#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
+
+#~ msgid ""
+#~ "<b>Warning</b>\n"
+#~ " This will <b>destroy all data</b> on the target\n"
+#~ " device, are you sure you want to proceed ?\n"
+#~ "\n"
+#~ " If you say ok here, please <b>do not unplug</b>\n"
+#~ " the device during the following operation."
+#~ msgstr ""
+#~ "<b>Warning</b>\n"
+#~ " This will <b>destroy all data</b> on the target\n"
+#~ " device, are you sure you want to proceed ?\n"
+#~ "\n"
+#~ " If you say OK here, please <b>do not unplug</b>\n"
+#~ " the device during the following operation."
+
+#~ msgid "Select"
+#~ msgstr "Select"
+
+#~ msgid ""
+#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
+#~ "imagewriter."
+#~ msgstr ""
+#~ "A tool for writing ISO images to a USB stick. It is a fork of usb-"
+#~ "imagewriter."
+
+#~ msgid ""
+#~ "Writing is in progress. Exiting during writing will occur that the device "
+#~ "or the backup will be unusable.\n"
+#~ "Are you sure you want to quit during writing?"
+#~ msgstr ""
+#~ "Writing is in progress. Exiting during writing will make the device or "
+#~ "the backup unusable.\n"
+#~ "Are you sure you want to quit during writing?"
+
+#~ msgid "A GUI tool to write .img and .iso files to USB Keys"
+#~ msgstr "A GUI tool to write .img and .iso files to USB sticks"
+
+#~ msgid "You have not the rights for writing on the device"
+#~ msgstr "You don't have permission to write to the device"
+
+#~ msgid "Backup in:"
+#~ msgstr "Backup in:"
+
+#~ msgid "Backup in: "
+#~ msgstr "Backup in: "