Update po files

1 files changed, 293 insertions, 156 deletions

diff --git a/po/da.po b/po/da.po
index e0b1a4b..ef2f769 100644
--- a/po/da.po
+++ b/po/da.po
@@ -12,7 +12,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-15 17:59+0200\n"
+"POT-Creation-Date: 2020-05-26 07:11+0200\n"
 "PO-Revision-Date: 2019-01-29 07:13+0000\n"
 "Last-Translator: scootergrisen\n"
 "Language-Team: Danish (http://www.transifex.com/MageiaLinux/mageia/language/"
@@ -23,145 +23,154 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: backend/raw_write.py:49 backend/raw_write.py:78
+#: backend/raw_write.py:51 backend/raw_write.py:81
 msgid "Reading error."
 msgstr "Fejllæsning."
 
-#: backend/raw_write.py:58
+#: backend/raw_write.py:61
 msgid "You don't have permission to write to the device {}"
 msgstr "Du har ikke tilladelse til at skrive til enheden {}"
 
-#: backend/raw_write.py:87 backend/raw_write.py:100 backend/raw_write.py:108
+#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
 msgid "Writing error."
 msgstr "Fejlskrivning."
 
-#: backend/raw_write.py:117 lib/isodumper.py:368
-msgid "Success"
-msgstr "Lykkedes"
-
 #: backend/raw_write.py:122
+msgid "Writing terminated"
+msgstr ""
+
+#: backend/raw_write.py:129
 msgid "No partition is mounted."
 msgstr "Der er ikke monteret nogen partition."
 
-#: backend/raw_write.py:128
+#: backend/raw_write.py:135
 msgid "Could not read mtab ! {} {}"
 msgstr "Kunne ikke læse mtab! {} {}"
 
-#: backend/raw_write.py:131
+#: backend/raw_write.py:138
 msgid "Unmounting all partitions of  {}:\n"
 msgstr "Afmonterer alle partitioner af {}:\n"
 
-#: backend/raw_write.py:134
+#: backend/raw_write.py:141
 msgid "Trying to unmount {}...\n"
 msgstr "Prøver at afmontere {}...\n"
 
-#: backend/raw_write.py:138
+#: backend/raw_write.py:145
 msgid "Partition {} is busy"
 msgstr "Partitionen {} er optaget"
 
-#: backend/raw_write.py:140
+#: backend/raw_write.py:147
 msgid "Error, umount {} was terminated by signal {}"
 msgstr "Fejl, umount {} blev stoppet af signalet {}"
 
-#: backend/raw_write.py:142
+#: backend/raw_write.py:149
 msgid "{} successfully unmounted"
 msgstr "{} blev afmonteret"
 
-#: backend/raw_write.py:144
+#: backend/raw_write.py:151
 msgid "Error, umount returned {}"
 msgstr "Fejl, umount returnerede {}"
 
-#: backend/raw_write.py:146
+#: backend/raw_write.py:153
 msgid "Execution failed: {}"
 msgstr "Eksekvering mislykkedes: {}"
 
-#: backend/raw_write.py:171
+#: backend/raw_write.py:181
 msgid "Signature file {} not found\n"
 msgstr "Signaturfilen {} blev ikke fundet\n"
 
-#: backend/raw_write.py:179
-msgid "Sum SHA512 file {} not found\n"
-msgstr "Sum SHA512-filen {} blev ikke fundet\n"
+#: backend/raw_write.py:189
+msgid "Sum file {} not found\n"
+msgstr ""
 
-#: backend/raw_write.py:207
+#: backend/raw_write.py:219
 #, python-format
-msgid "Invalid signature for %s.sha512"
-msgstr "Ugyldig signatur til %s.sha512"
+msgid "Invalid signature for %s"
+msgstr ""
 
-#: backend/raw_write.py:209
-msgid "SHA512 sum: {}"
-msgstr "SHA512-sum: {}"
+#: backend/raw_write.py:221
+msgid "SHA3 sum: {}"
+msgstr ""
 
-#: backend/raw_write.py:213
-msgid "The sha512 sum check is OK and the sum is signed"
-msgstr "Tjek af sha512-sum er OK og summen er signeret"
+#: backend/raw_write.py:226
+msgid "The {} sum check is OK and the sum is signed"
+msgstr ""
 
-#: backend/raw_write.py:215
-msgid "The sha512 sum check is OK but the signature can't be found"
-msgstr "Tjek af sha512-sum er OK men kan ikke finde signaturen"
+#: backend/raw_write.py:229
+msgid "The {} sum check is OK but the signature can't be found"
+msgstr ""
 
-#: backend/raw_write.py:217
+#: backend/raw_write.py:231
 msgid "/!\\The computed and stored sums don't match"
 msgstr "/!\\De udregnede og lagrede summe er ikke ens"
 
-#: lib/isodumper.py:166
+#: backend/raw_write.py:256 backend/raw_write.py:279 backend/raw_write.py:301
+#: backend/raw_write.py:320 backend/raw_write.py:339 backend/raw_write.py:358
+msgid "Error while doing persistent partition: "
+msgstr ""
+
+#: backend/raw_write.py:276 backend/raw_write.py:362
+msgid "Persistent partition done"
+msgstr ""
+
+#: lib/isodumper.py:157
 msgid "Target Device: "
 msgstr "Destinationsenheder: "
 
 #. I18N these are units for files size
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "B"
 msgstr ""
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "GiB"
 msgstr ""
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "KiB"
 msgstr ""
 
-#: lib/isodumper.py:174
+#: lib/isodumper.py:165
 msgid "MiB"
 msgstr ""
 
-#: lib/isodumper.py:174 lib/isodumper.py:178
+#: lib/isodumper.py:165 lib/isodumper.py:169
 msgid "TiB"
 msgstr ""
 
-#: lib/isodumper.py:192
+#: lib/isodumper.py:183
 msgid "Formatting confirmation"
 msgstr "Bekræftelse af formatering"
 
-#: lib/isodumper.py:197
+#: lib/isodumper.py:188
 msgid "The device was formatted successfully."
 msgstr "Enheden blev formateret med succes."
 
-#: lib/isodumper.py:201
+#: lib/isodumper.py:192
 msgid "An error occurred while creating a partition."
 msgstr "En fejl opstod ved oprettelse af en partition."
 
-#: lib/isodumper.py:205
+#: lib/isodumper.py:196
 msgid "Authentication error."
 msgstr "Identifikation fejl."
 
-#: lib/isodumper.py:209
+#: lib/isodumper.py:200
 msgid "An error occurred."
 msgstr "Der opstod en fejl."
 
-#: lib/isodumper.py:226
+#: lib/isodumper.py:221
 msgid "Wrote: {}% "
 msgstr "Skrev: {}% "
 
-#: lib/isodumper.py:252
+#: lib/isodumper.py:247
 msgid "Backup confirmation"
 msgstr "Bekræftelse af sikkerhedskopiering"
 
-#: lib/isodumper.py:252
+#: lib/isodumper.py:247
 msgid "Do you want to overwrite the file?"
 msgstr "Ønsker du at overskrive filen?"
 
-#: lib/isodumper.py:260
+#: lib/isodumper.py:255
 #, python-format
 msgid ""
 "The destination directory is too small to receive the backup (%s Mb needed)"
@@ -169,66 +178,78 @@ msgstr ""
 "Destinationsmappen er for lille til at modtage sikkerhedskopien (%s Mb "
 "kræves)"
 
-#: lib/isodumper.py:266 lib/isodumper.py:541 lib/isodumper.py:698
+#: lib/isodumper.py:261 lib/isodumper.py:556 lib/isodumper.py:732
 msgid "Backup to:"
 msgstr "Sikkerhedskopiér til:"
 
-#: lib/isodumper.py:279
+#: lib/isodumper.py:274
 #, python-brace-format
 msgid "{source} successfully written to {target}"
 msgstr "{source} blev skrevet til {target}"
 
-#: lib/isodumper.py:301
+#: lib/isodumper.py:296
 msgid "The device is too small to contain the ISO file."
 msgstr "Enheden er for lille til at indeholde ISO filen."
 
-#: lib/isodumper.py:305
+#: lib/isodumper.py:300
 msgid "Writing confirmation"
 msgstr "Bekræftelse af skrivning"
 
-#: lib/isodumper.py:308
+#: lib/isodumper.py:303
 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
 msgstr "Enheden er større end 32 Gb. Er du sikker på, at du vil bruge den?"
 
-#: lib/isodumper.py:308 lib/isodumper.py:380
+#: lib/isodumper.py:303 lib/isodumper.py:386
 msgid "Warning"
 msgstr "Advarsel"
 
-#: lib/isodumper.py:315
+#: lib/isodumper.py:310
 #, python-brace-format
 msgid "Writing {source} to {target}"
 msgstr "Skriver {source} til {target}"
 
-#: lib/isodumper.py:316
+#: lib/isodumper.py:311
 msgid " to "
 msgstr " til "
 
-#: lib/isodumper.py:316
+#: lib/isodumper.py:311
 msgid "Executing copy from "
 msgstr "Udfører kopi fra "
 
-#: lib/isodumper.py:333
+#: lib/isodumper.py:327
 #, python-brace-format
 msgid "Image {source} successfully written to {target}"
 msgstr "Aftrykket {source} blev skrevet til {target}"
 
-#: lib/isodumper.py:334
+#: lib/isodumper.py:328
 msgid "Bytes written: "
 msgstr "Bytes skrevet: "
 
-#: lib/isodumper.py:335
+#: lib/isodumper.py:329
 msgid "Checking "
 msgstr "Tjekker"
 
-#: lib/isodumper.py:353
+#: lib/isodumper.py:347
 msgid "Adding persistent partition"
 msgstr ""
 
-#: lib/isodumper.py:355
+#: lib/isodumper.py:350
+msgid "No key for encrypted partition provided. Adding the partition aborted."
+msgstr ""
+
+#: lib/isodumper.py:354
+msgid "Added encrypted persistent partition"
+msgstr ""
+
+#: lib/isodumper.py:359
 msgid "Added persistent partition"
 msgstr ""
 
-#: lib/isodumper.py:368
+#: lib/isodumper.py:374
+msgid "Success"
+msgstr "Lykkedes"
+
+#: lib/isodumper.py:374
 msgid ""
 "The operation completed successfully.\n"
 " You are free to unplug it now, a logfile \n"
@@ -240,7 +261,7 @@ msgstr ""
 "(/home/-bruger- eller /root)/.isodumper/isodumper.log vil blive gemt når\n"
 " du lukket programmet."
 
-#: lib/isodumper.py:380
+#: lib/isodumper.py:386
 msgid ""
 "Writing is in progress. Exiting during writing \n"
 "            will make the device or the backup unusable.\n"
@@ -250,86 +271,111 @@ msgstr ""
 "            vil gøre enheden eller sikkerhedskopien ubrugelig.\n"
 "            Er du sikker på, at du vil afslutte under skrivning?"
 
-#: lib/isodumper.py:392 lib/isodumper.py:476
+#: lib/isodumper.py:398 lib/isodumper.py:482
 msgid "Error"
 msgstr "Fejl"
 
-#: lib/isodumper.py:432
+#: lib/isodumper.py:438
 msgid "Image "
 msgstr "Billede "
 
-#: lib/isodumper.py:436 lib/isodumper.py:498
+#: lib/isodumper.py:442 lib/isodumper.py:504
 msgid "IsoDumper"
 msgstr "IsoDumper"
 
-#: lib/isodumper.py:436
+#: lib/isodumper.py:442
+msgid "Mageia IsoDumper"
+msgstr ""
+
+#: lib/isodumper.py:444
 msgid ""
-"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
-"for safely writing a bootable ISO image to a USB flash drive, an operation "
-"devious & potentially hazardous when done by hand. As a bonus, it can also "
-"back up theentire previous<BR />contents of the flash drive onto the hard "
-"disc, and restore the flash drive to its previous state subsequently.<BR /"
-">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
-"can be launched either from the menus, or a user or root console with the "
-"command 'isodumper'.<BR />For normal users, the root password is solicited; "
-"this is necessary for the program's operation. <BR />The flash drive can be "
-"inserted beforehand or once the program is started. In the latter case, a "
-"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
-"to find it once it is. <BR />(You may have to close any automatically opened "
-"File Manager window).<BR /><BR />The fields of the main window are as "
-"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
-"down list to choose from.<BR />- Write Image: to choose the source ISO image "
-"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
-"device: This button launches the operation - with a prior warning dialogue. "
-"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
-"define the name and placement of the backup image file. The current flash "
-"drive will be backed up to a disc file. Note that the entire flash drive is "
-"preserved, regardless of its actual contents; ensure that you have the "
-"necessary free disc space (the same size as the USB device). This backup "
-"file can be used later to restore the flash drive by selecting it as the "
-"source *.img file to write out.<BR />- Backup the device: launch the backup "
-"operation.<BR />- Format the device:  create an unique partition on the "
-"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
-"volume name and the format in a new dialog box.<BR />"
-msgstr ""
-"Mageia IsoDumper<BR />----------------<BR />Dette GUI-program er primært til "
-"at skrive et bootbart ISO-aftryk sikkert til et USB-flashdrev, en handling "
-"som kan drille og potientelt være farligt når det gøres manuelt. Som en "
-"bonus, kan du også sikkerhedskopiere alt det forrige<BR />indhold på "
-"flashdrevet til harddisken og gendanne flashdrevet til sin forrige tilstand "
-"efterfølgende.<BR />Den har også en facalitet til formatering af USB-enheden."
-"<BR /><BR />IsoDumper kan enten startes fra menuerne eller en bruger- eller "
-"root-konsol med kommandoen 'isodumper'.<BR />For normale brugere anmodes der "
-"om root-adgangskoden; dette er nødvendigt for at programmet kan fungere. "
-"<BR />Flashdrevet kan indsættes på forhånd eller når programmet er startet. "
-"I det sidstnævnte tilfælde, fortæller en dialog at der ikke er sat noget "
-"flashdrev i og tilbyder 'prøv igen' for at finde det når det er sat i. <BR /"
-">(det kan være at du skal lukke eventuelle automatisk åbnede "
-"filhåndteringsvinduer).<BR /><BR />Hovedvinduets felter er som følger:<BR /"
-">- Enhed der arbejdes på: USB-flashdrevets enhed, en drop down-liste at "
-"vælge fra.<BR />- Skriv aftryk: til at vælge kilde-ISO-aftryk *.iso (eller "
-"flashdrev-sikkedskopifil *.img) som skal skrives ud.<BR />- Skriv til enhed: "
-"Denne knap starter handlingen - med en forudgående advarslesdialog. <BR /"
-">Handlingen vises i forløbsbjælken nedenfor.<BR />- Sikkerhedskopiér til: "
-"definer navnet og placeringen af sikkerhedskopiaftrykfilen. Der vil blive "
-"oprettet en sikkerhedskopi af det aktulle flashdrev til en diskfil. Bemærk "
-"at hele flashdrevet bevares, uanset dens indhold; sørg for at du har den "
-"nødvendige ledige diskplads (samme størrelse som USB-enheden). Denne "
-"sikkerhedskopifil kan senere bruges til at gendanne flashdrevet ved at vælge "
-"den som kilde-*.img-filen som skal skrives ud.<BR />- Sikkerhedskopiér "
-"enheden: start sikkerhedskopieringshandlingen.<BR />- Formatér enheden: "
-"opret en unik partition på hele volumen i det angivne format i FAT, NTFS "
-"eller ext. Du kan angive et volumenavn og format i en ny dialogboks.<BR />"
-
-#: lib/isodumper.py:476
+"This GUI program is primarily for safely writing a bootable ISO image to a "
+"USB flash drive, an operation devious & potentially hazardous when done by "
+"hand. As a bonus, it can also back up the entire previous contents of the "
+"flash drive onto the hard disc, and restore the flash drive to its previous "
+"state subsequently."
+msgstr ""
+
+#: lib/isodumper.py:448
+msgid "It gives also a feature for formatting the USB device."
+msgstr ""
+
+#: lib/isodumper.py:449
+msgid ""
+"IsoDumper can be launched either from the menus, or a user console with the "
+"command 'isodumper'."
+msgstr ""
+
+#: lib/isodumper.py:450
+msgid ""
+"The root password is solicited when this is necessary for the program's "
+"operation."
+msgstr ""
+
+#: lib/isodumper.py:451
+msgid ""
+"The flash drive can be inserted beforehand or once the program is started. "
+"In the latter case, a dialogue will say that there is no flash drive "
+"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
+"close any automatically opened File Manager window)."
+msgstr ""
+
+#: lib/isodumper.py:454
+msgid ""
+"The fields of the main window are as follows:<BR />- Device to work on: the "
+"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
+"Image: to choose the source ISO image *.iso (or flash drive backup file *."
+"img) to write out.<BR />- Write to device: This button launches the "
+"operation - with a prior warning dialogue."
+msgstr ""
+
+#: lib/isodumper.py:458
+msgid ""
+"- Add a persistent partition: the remaining space will be used in a new "
+"partition where data from the Live system can be written and recovered "
+"between sessions."
+msgstr ""
+
+#: lib/isodumper.py:459
+msgid ""
+"- Encrypt: the persistent partition will be encrypted with the key provided "
+"in <i>Key</i> field."
+msgstr ""
+
+#: lib/isodumper.py:460
+msgid "The operation is shown in the progress bar beneath."
+msgstr ""
+
+#: lib/isodumper.py:461
+msgid ""
+"- Backup to: define the name and placement of the backup image file. The "
+"current flash drive will be backed up to a disc file. Note that the entire "
+"flash drive is preserved, regardless of its actual contents; ensure that you "
+"have the necessary free disc space (the same size as the USB device). This "
+"backup file can be used later to restore the flash drive by selecting it as "
+"the source *.img file to write out."
+msgstr ""
+
+#: lib/isodumper.py:465
+msgid "- Backup the device: launch the backup operation."
+msgstr ""
+
+#: lib/isodumper.py:466
+msgid ""
+"- Format the device: create an unique partition on the entire volume in the "
+"specified format in FAT, exFAT, NTFS or ext. You can specify a volume name "
+"and the format in a new dialog box."
+msgstr ""
+
+#: lib/isodumper.py:482
 msgid "There is another instance of Isodumper already running."
 msgstr ""
 
-#: lib/isodumper.py:490
+#: lib/isodumper.py:496
 msgid "Choose an image"
 msgstr "Vælg et aftryk"
 
-#: lib/isodumper.py:491
+#: lib/isodumper.py:497
 msgid ""
 "Warning\n"
 "This will destroy all data on the target device,\n"
@@ -343,107 +389,119 @@ msgstr ""
 "        Hvis du siger ok her, så tag venligst <b>ikke enheden ud</b> under "
 "den følgende handling."
 
-#: lib/isodumper.py:525
+#: lib/isodumper.py:531
 msgid "Device to work on:"
 msgstr "Enhed der arbejdes på:"
 
-#: lib/isodumper.py:529
+#: lib/isodumper.py:535
 msgid "Write Image:"
 msgstr "Skriv aftryk:"
 
-#: lib/isodumper.py:535
+#: lib/isodumper.py:541
 msgid "&Write to device"
 msgstr "&Skriv til enhed"
 
-#: lib/isodumper.py:538
+#: lib/isodumper.py:546
 msgid "Add a persistent partition in the remaining space"
 msgstr ""
 
-#: lib/isodumper.py:547
+#: lib/isodumper.py:548
+msgid "Encrypt partition"
+msgstr ""
+
+#: lib/isodumper.py:549
+msgid "Key:"
+msgstr ""
+
+#: lib/isodumper.py:562
 msgid "Backup the device"
 msgstr "Sikkerhedskopiér enheden"
 
-#: lib/isodumper.py:550
-msgid "Format the device in FAT, NTFS or ext:"
-msgstr "Formatere enheden i FAT, NTFS eller ext:"
+#: lib/isodumper.py:565
+msgid "Format the device in FAT, exFAT, NTFS or ext:"
+msgstr ""
 
-#: lib/isodumper.py:552
+#: lib/isodumper.py:567
 msgid "Format the device"
 msgstr "Formatér enheden"
 
-#: lib/isodumper.py:555
+#: lib/isodumper.py:570
 msgid "Progress"
 msgstr "Forløb"
 
-#: lib/isodumper.py:559
+#: lib/isodumper.py:574
 msgid "Report"
 msgstr "Rapport"
 
-#: lib/isodumper.py:562 lib/isodumper.py:666
+#: lib/isodumper.py:577 lib/isodumper.py:687
 msgid "Refresh"
 msgstr "Genopfrisk"
 
-#: lib/isodumper.py:564
+#: lib/isodumper.py:579
 msgid "About"
 msgstr "Om"
 
-#: lib/isodumper.py:566
+#: lib/isodumper.py:581
 msgid "Help"
 msgstr "Hjælp"
 
-#: lib/isodumper.py:568
+#: lib/isodumper.py:583
 msgid "Quit"
 msgstr "Afslut"
 
-#: lib/isodumper.py:574
+#: lib/isodumper.py:589
 msgid "UDisks2 is not available on your system"
 msgstr "UDisks2 er ikke tilgængelig på dit system"
 
-#: lib/isodumper.py:590
+#: lib/isodumper.py:605
 msgid "Label for the device:"
 msgstr "Label til enhenden:"
 
-#: lib/isodumper.py:594
+#: lib/isodumper.py:609
 msgid "FAT 32 (Windows)"
 msgstr "FAT 32 (Windows)"
 
-#: lib/isodumper.py:596
+#: lib/isodumper.py:611
+msgid "exFAT (Windows)"
+msgstr ""
+
+#: lib/isodumper.py:613
 msgid "NTFS (Windows)"
 msgstr "NTFS (Windows)"
 
-#: lib/isodumper.py:598
+#: lib/isodumper.py:615
 msgid "ext4 (Linux)"
 msgstr "ext4 (Linux)"
 
-#: lib/isodumper.py:600
+#: lib/isodumper.py:617
 msgid "Execute"
 msgstr "Udfør"
 
-#: lib/isodumper.py:601 lib/isodumper.py:667
+#: lib/isodumper.py:618 lib/isodumper.py:688
 msgid "Cancel"
 msgstr "Annullér"
 
-#: lib/isodumper.py:638
+#: lib/isodumper.py:659
 msgid "OK"
 msgstr "OK"
 
-#: lib/isodumper.py:648
+#: lib/isodumper.py:669
 msgid "Yes"
 msgstr "Ja"
 
-#: lib/isodumper.py:649
+#: lib/isodumper.py:670
 msgid "No"
 msgstr "Nej"
 
-#: lib/isodumper.py:657
+#: lib/isodumper.py:678
 msgid "A tool for writing ISO images to  a device"
 msgstr "Et værktøj til at skrive ISO-aftryk på en enhed"
 
-#: lib/isodumper.py:657
+#: lib/isodumper.py:678
 msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
 msgstr ""
 
-#: lib/isodumper.py:665
+#: lib/isodumper.py:686
 msgid ""
 "Warning\n"
 "No target devices were found.\n"
@@ -471,3 +529,82 @@ msgstr "Et GUI-værktøj til at skrive .img- og .iso-filer til USB-sticks"
 
 #~ msgid "Mb"
 #~ msgstr "Mb"
+
+#~ msgid "Format the device in FAT, NTFS or ext:"
+#~ msgstr "Formatere enheden i FAT, NTFS eller ext:"
+
+#~ msgid ""
+#~ "Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
+#~ "for safely writing a bootable ISO image to a USB flash drive, an "
+#~ "operation devious & potentially hazardous when done by hand. As a bonus, "
+#~ "it can also back up theentire previous<BR />contents of the flash drive "
+#~ "onto the hard disc, and restore the flash drive to its previous state "
+#~ "subsequently.<BR />It gives also a feature for formatting the USB device."
+#~ "<BR /><BR />IsoDumper can be launched either from the menus, or a user or "
+#~ "root console with the command 'isodumper'.<BR />For normal users, the "
+#~ "root password is solicited; this is necessary for the program's "
+#~ "operation. <BR />The flash drive can be inserted beforehand or once the "
+#~ "program is started. In the latter case, a dialogue will say that there is "
+#~ "no flash drive inserted, and allow a 'retry' to find it once it is. <BR /"
+#~ ">(You may have to close any automatically opened File Manager window)."
+#~ "<BR /><BR />The fields of the main window are as follows:<BR />- Device "
+#~ "to work on: the device of the USB flash drive, a drop-down list to choose "
+#~ "from.<BR />- Write Image: to choose the source ISO image *.iso (or flash "
+#~ "drive backup file *.img) to write out.<BR />- Write to device: This "
+#~ "button launches the operation - with a prior warning dialogue. <BR />The "
+#~ "operation is shown in the progress bar beneath.<BR />- Backup to: define "
+#~ "the name and placement of the backup image file. The current flash drive "
+#~ "will be backed up to a disc file. Note that the entire flash drive is "
+#~ "preserved, regardless of its actual contents; ensure that you have the "
+#~ "necessary free disc space (the same size as the USB device). This backup "
+#~ "file can be used later to restore the flash drive by selecting it as the "
+#~ "source *.img file to write out.<BR />- Backup the device: launch the "
+#~ "backup operation.<BR />- Format the device:  create an unique partition "
+#~ "on the entire volume in the specified format in FAT, NTFS or ext. You can "
+#~ "specify a volume name and the format in a new dialog box.<BR />"
+#~ msgstr ""
+#~ "Mageia IsoDumper<BR />----------------<BR />Dette GUI-program er primært "
+#~ "til at skrive et bootbart ISO-aftryk sikkert til et USB-flashdrev, en "
+#~ "handling som kan drille og potientelt være farligt når det gøres manuelt. "
+#~ "Som en bonus, kan du også sikkerhedskopiere alt det forrige<BR />indhold "
+#~ "på flashdrevet til harddisken og gendanne flashdrevet til sin forrige "
+#~ "tilstand efterfølgende.<BR />Den har også en facalitet til formatering af "
+#~ "USB-enheden.<BR /><BR />IsoDumper kan enten startes fra menuerne eller en "
+#~ "bruger- eller root-konsol med kommandoen 'isodumper'.<BR />For normale "
+#~ "brugere anmodes der om root-adgangskoden; dette er nødvendigt for at "
+#~ "programmet kan fungere. <BR />Flashdrevet kan indsættes på forhånd eller "
+#~ "når programmet er startet. I det sidstnævnte tilfælde, fortæller en "
+#~ "dialog at der ikke er sat noget flashdrev i og tilbyder 'prøv igen' for "
+#~ "at finde det når det er sat i. <BR />(det kan være at du skal lukke "
+#~ "eventuelle automatisk åbnede filhåndteringsvinduer).<BR /><BR /"
+#~ ">Hovedvinduets felter er som følger:<BR />- Enhed der arbejdes på: USB-"
+#~ "flashdrevets enhed, en drop down-liste at vælge fra.<BR />- Skriv aftryk: "
+#~ "til at vælge kilde-ISO-aftryk *.iso (eller flashdrev-sikkedskopifil *."
+#~ "img) som skal skrives ud.<BR />- Skriv til enhed: Denne knap starter "
+#~ "handlingen - med en forudgående advarslesdialog. <BR />Handlingen vises i "
+#~ "forløbsbjælken nedenfor.<BR />- Sikkerhedskopiér til: definer navnet og "
+#~ "placeringen af sikkerhedskopiaftrykfilen. Der vil blive oprettet en "
+#~ "sikkerhedskopi af det aktulle flashdrev til en diskfil. Bemærk at hele "
+#~ "flashdrevet bevares, uanset dens indhold; sørg for at du har den "
+#~ "nødvendige ledige diskplads (samme størrelse som USB-enheden). Denne "
+#~ "sikkerhedskopifil kan senere bruges til at gendanne flashdrevet ved at "
+#~ "vælge den som kilde-*.img-filen som skal skrives ud.<BR />- "
+#~ "Sikkerhedskopiér enheden: start sikkerhedskopieringshandlingen.<BR />- "
+#~ "Formatér enheden: opret en unik partition på hele volumen i det angivne "
+#~ "format i FAT, NTFS eller ext. Du kan angive et volumenavn og format i en "
+#~ "ny dialogboks.<BR />"
+
+#~ msgid "The sha512 sum check is OK but the signature can't be found"
+#~ msgstr "Tjek af sha512-sum er OK men kan ikke finde signaturen"
+
+#~ msgid "The sha512 sum check is OK and the sum is signed"
+#~ msgstr "Tjek af sha512-sum er OK og summen er signeret"
+
+#~ msgid "SHA512 sum: {}"
+#~ msgstr "SHA512-sum: {}"
+
+#~ msgid "Invalid signature for %s.sha512"
+#~ msgstr "Ugyldig signatur til %s.sha512"
+
+#~ msgid "Sum SHA512 file {} not found\n"
+#~ msgstr "Sum SHA512-filen {} blev ikke fundet\n"