import MCC-help .xml files from Calenco

1 files changed, 250 insertions, 0 deletions

diff --git a/docs/mcc-help/en/drakx-misc-params-sect1.xml b/docs/mcc-help/en/drakx-misc-params-sect1.xml
new file mode 100644
index 00000000..4a9898b8
--- /dev/null
+++ b/docs/mcc-help/en/drakx-misc-params-sect1.xml
@@ -0,0 +1,250 @@
+<!-- Converted by db4-upgrade version 1.0 -->
+
+<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:id="drakx-misc-params"><info><title xml:id="BId-drakx-misc-params-ti1">Deprecated - Checking Miscellaneous Parameters</title></info>
+  
+  
+ <section xml:id="drakxid-summary"><info><title xml:id="BId-drakx-misc-params-ti2" revision="1">Summary</title></info>
+    
+    
+    <mediaobject condition="expert" xml:id="dx-summary">
+      <imageobject>
+	<imagedata align="center" fileref="dx-summary.png" format="PNG" xml:id="BId-drakx-misc-params-im1" revision="1" width="11.5cm"/>
+      </imageobject>
+    </mediaobject>
+    
+  <para xml:id="BId-drakx-misc-params-pa1" revision="4"><indexterm xml:id="BIdNEW-drakx-misc-params-it16">
+   <primary>configuration</primary> </indexterm>As a review,
+   <application>DrakX</application> will present a summary of information it has gathered
+   about your system. Depending on the hardware installed on your
+   machine, you may have some or all of the following entries. Each
+   entry is made up of the hardware item to be configured, followed by
+   a quick summary of the current configuration. Click on the
+   corresponding <guibutton>Configure</guibutton> button to make any
+   changes.</para>
+
+   <itemizedlist>
+    
+    <listitem>
+    <para xml:id="BId-drakx-misc-params-pa3" revision="2"><guilabel>Timezone</guilabel>: <indexterm xml:id="BId-drakx-misc-params-it2"><primary>time
+     zone</primary><secondary>configuration</secondary></indexterm>by
+     default, <application>DrakX</application> deduces your time zone based on the country
+     you have chosen. You can click on the
+     <guibutton>Configure</guibutton> button here if this is not
+     correct.</para>
+   </listitem>
+  
+   <listitem>    
+    <para xml:id="drakxidselectCountry" revision="5"><indexterm xml:id="drakx-it54a"> <primary>country</primary>
+     <secondary>configuration</secondary>
+     </indexterm><guilabel>Country / Region</guilabel>: check the
+     current country selection. If you're not in the country selected
+     by <application>DrakX</application>, click on the <guibutton>Configure</guibutton>
+     button and choose another. If your country isn't in the list
+     shown, click on the <guibutton>Other Countries</guibutton> button to get a
+     complete country list.</para>
+   </listitem>
+   
+   <listitem>
+    <para xml:id="drakx-pa152a" revision="3"><guilabel>Bootloader</guilabel>: if you wish to
+     change your bootloader configuration, click this button. This
+     should be reserved to advanced users. Refer to the printed
+     documentation or the in-line help about bootloader configuration
+     in the <application>Mageia Control Center</application>.</para>
+   </listitem>
+   
+   <listitem>
+    <para xml:id="drakx-pa155b"><indexterm xml:id="drakx-it57c">
+      <primary>services</primary> <secondary>configuration</secondary>
+      </indexterm><guilabel>Services</guilabel>: with this entry
+      you can fine tune which services will be run on your machine. If
+      you plan to use this machine as a server it's a good idea to
+      review this setup.</para>
+   </listitem>
+   
+     
+   
+    <listitem>
+    <para xml:id="BId-drakx-misc-params-pa2" revision="1"><indexterm xml:id="BId-drakx-misc-params-it1"> <primary>keyboard</primary>
+     <secondary>configuration</secondary>
+     </indexterm><guilabel>Keyboard</guilabel>: check the current
+     keyboard map configuration and change it if necessary.</para>
+   </listitem>
+   <listitem>
+    <para xml:id="BId-drakx-misc-params-pa4"><indexterm xml:id="BId-drakx-misc-params-it3"> <primary>mouse</primary>
+      <secondary>configuration</secondary></indexterm><guilabel>Mouse</guilabel>:
+      verify the current mouse configuration and click on the button
+      to change it if necessary.</para>
+   </listitem>
+
+<!--  Printers are no longer in Summary section or Installer - John
+   <listitem>
+    <para xml:id="drakxid-configurePrinter" revision="3"><indexterm xml:id="BId-drakx-misc-params-it4"> <primary>printer</primary>
+      <secondary>configuration</secondary></indexterm><guilabel>Printer</guilabel>:
+      clicking on the <guibutton>Configure</guibutton> button will
+      open the printer configuration wizard. Consult <phrase xml:id="BIdNEW-drakx-misc-params-ph2" condition="Discovery">the
+      corresponding chapter of the
+      <citetitle>Starter Guide</citetitle></phrase><phrase condition="Startonly" xml:id="BIdNEW-drakx-misc-params-ph3" revision="1"><xref linkend="printerdrake"/></phrase><phrase condition="only-in-ML-Full-Manual" xml:id="BIdNEW-drakx-misc-params-ph4" revision="1"><xref linkend="printerdrake"/></phrase> for more information on how to
+      set up a new printer. The interface presented in our manual is
+      similar to the one used during installation.</para>
+   </listitem>
+
+-->
+
+   <listitem>
+    <para xml:id="drakxid-sound_config" revision="2"><indexterm xml:id="BId-drakx-misc-params-it5"> <primary>sound card</primary>
+       <secondary>configuration</secondary>
+       </indexterm><guilabel>Sound card</guilabel>: if a sound card is
+       detected on your system, it will be displayed here. If you
+       notice the sound card isn't the one actually present on your
+       system, you can click on the button and choose a different
+       driver.</para>
+   </listitem>
+   <!--  TV cards are no longer in Summary section or Installer - Marja
+   <listitem>
+    <para xml:id="BId-drakx-misc-params-pa5" revision="2"><indexterm xml:id="BId-drakx-misc-params-it6"> <primary>tv card</primary>
+       <secondary>configuration</secondary> </indexterm><guilabel>TV
+       card</guilabel>: if you have a TV card, this is where
+       information about its configuration will be displayed. If you
+       want to try a different driver for your TV card, or its
+       detection wasn't accurate you can click on
+       <guibutton>Configure</guibutton> to try to configure it
+       manually.</para>
+   </listitem>
+   --> 
+
+   <listitem>
+    <para xml:id="drakx-pa152b" revision="3"><indexterm xml:id="drakx-it57b">
+       <primary>graphical interface</primary>
+       <secondary>configuration</secondary>
+       </indexterm><guilabel>Graphical Interface</guilabel>: by
+       default, <application>DrakX</application> configures your graphical interface with
+       a resolution that best matches your video card and monitor
+       combination. If that doesn't suit you, or <application>DrakX</application> could
+     not automatically configure it (<guilabel>not
+       configured</guilabel> is displayed), click on
+       <guibutton>Configure</guibutton> to reconfigure your graphical
+       interface. You can click on <guibutton>Help</guibutton> from
+       within the configuration wizard to benefit from full in-line
+       help.</para>
+   </listitem>
+   
+   <listitem>
+    <para xml:id="drakx-pa152c" revision="2"><indexterm xml:id="drakx-it57d">
+      <primary>network</primary>
+      <secondary>configuration</secondary></indexterm>
+      <guilabel>Network</guilabel>: if you wish to configure your
+      Internet or local network access, you can do so from here. Refer to
+      the printed documentation or use the <application>Mageia Control Center</application> after the
+      installation has finished to benefit from full in-line
+      help.</para>
+   </listitem>
+   
+   <listitem>
+    <para xml:id="BIdNEW-drakx-misc-params-pa62" revision="2"><indexterm xml:id="BIdNEW-drakx-misc-params-it17"> <primary>network</primary>
+      <secondary>proxy</secondary>
+      </indexterm><guilabel>Proxies</guilabel>: allows you to configure
+      <acronym>HTTP</acronym> and <acronym>FTP</acronym> proxy addresses if the machine you're
+      installing on is to be located behind a proxy server.</para>
+   </listitem>
+   
+   <listitem>
+    <para xml:id="drakx-pa155a"><indexterm xml:id="drakx-it58a">
+      <primary>security</primary>
+      <secondary>configuration</secondary></indexterm><guilabel>Security
+      Level</guilabel>: this entry allows you to redefine the security
+      level<phrase condition="Starter" xml:id="BId-drakx-misc-params-ph1">
+      as set in a previous step (see <xref linkend="drakxidmiscellaneous"/>)</phrase>.</para>
+   </listitem>
+   <listitem>
+    
+    <para xml:id="draxid-tinyfirewall" revision="1"><indexterm xml:id="drakx-it59a"> <primary>firewall</primary>
+    <secondary>configuration</secondary>
+    </indexterm><guilabel>Firewall</guilabel>: if you plan to connect
+    your machine to the Internet, it's a good idea to protect yourself
+    from intrusions by setting up a firewall. Consult <phrase condition="Discovery" xml:id="BIdNEW-drakx-misc-params-ph5">the
+    corresponding chapter of the
+    <citetitle>Starter Guide</citetitle></phrase><phrase condition="Startonly" xml:id="BIdNEW-drakx-misc-params-ph6" revision="2"><xref linkend="tinyfirewall"/></phrase><phrase condition="only-in-ML-Full-Manual" xml:id="BIdNEW-drakx-misc-params-ph7" revision="2"><xref linkend="tinyfirewall"/></phrase> for details
+    about firewall settings.</para>
+   </listitem>
+   
+   
+  </itemizedlist>
+ </section>
+
+  <section xml:id="drakxidconfigureTimezoneGMT" revision="11" role="manual"><info><title xml:id="BId-drakx-misc-params-ti3" revision="2">Time Zone Options</title></info>
+    
+    
+  
+  <mediaobject condition="expert" xml:id="dx-configureTimezoneGMT">
+   <imageobject>
+    <imagedata align="center" fileref="dx-configureTimezoneGMT.png" format="PNG" xml:id="BId-drakx-misc-params-im2" revision="2" width="11.5cm"/>
+   </imageobject>
+  </mediaobject>
+  
+  <para condition="no-inline-help" xml:id="BId-drakx-misc-params-pa7" revision="3">This dialog appears after selecting a new time zone in
+   the time zones list. After you've chosen the location nearest to
+   your time zone, two more options are shown.</para>
+  
+  <para xml:id="BId-drakx-misc-params-pa8" revision="1"><application>GNU/Linux</application> manages
+   time in <acronym>GMT</acronym> (Greenwich Mean Time) and translates it to local time
+   according to the time zone you selected. If the clock on your
+   motherboard is set to local time, you may deactivate this by
+   deselecting <guilabel>Hardware clock set to GMT</guilabel>, which
+   will let <application>GNU/Linux</application> know that the system clock and the hardware
+   clock are in the same time zone. This is useful when the machine
+   also hosts another operating system.</para>
+    
+  <para xml:id="BId-drakx-misc-params-pa9" revision="3">The
+    <guilabel>Automatic time synchronization</guilabel> option will
+    automatically regulate the system clock by connecting to a remote
+    time server on the Internet. For this feature to work, you must
+    have a working Internet connection. We recommend that you choose a
+    time server located near you or the generic <guilabel>World
+    Wide</guilabel> entry which will select the best server for
+    you. This option actually installs a time server which can be used
+    by other machines on your local network as well.</para>
+  </section>
+
+  
+
+
+
+  <section condition="expert" xml:id="drakxidconfigureServices"><info><title xml:id="BId-drakx-misc-params-ti10">Selecting Available Services
+   at Boot Time</title></info>
+  
+  
+  
+  <mediaobject condition="expert" xml:id="dx-configureServices">
+   <imageobject>
+    <imagedata align="center" fileref="dx-configureServices.png" format="PNG" xml:id="BId-drakx-misc-params-im5" revision="2" width="11.5cm"/>
+   </imageobject>
+  </mediaobject>
+
+  <para xml:id="BId-drakx-misc-params-pa57" revision="2"><indexterm xml:id="BId-drakx-misc-params-it15"> <primary>services</primary>
+   </indexterm><indexterm xml:id="BIdNEW-drakx-misc-params-it18">
+   <primary>boot</primary><secondary>services</secondary></indexterm>This
+   dialog is used to select which services you wish to start at boot
+   time.</para>
+  
+  <para xml:id="BId-drakx-misc-params-pa58" revision="2"><application>DrakX</application> will
+   list all services available on the current installation. Review
+   each of them carefully and uncheck those which aren't needed at
+   boot time.</para>
+
+  <tip>
+   <para xml:id="BId-drakx-misc-params-pa59" revision="1">A short
+    explanatory text will be displayed about a service when it is
+    selected. However, if you're not sure whether a service is useful
+    or not, it is safer to leave the default behavior.</para>
+    </tip>
+
+  <warning>
+   <para xml:id="BId-drakx-misc-params-pa60" revision="2">At this stage,
+    be very careful if you intend to use your machine as a server: you
+    probably don't want to start any services which you don't
+    need. Please remember that some services can be dangerous if
+    they're enabled on a server. In general, select only those
+    services you <emphasis>really</emphasis> need.</para>
+  </warning>
+ </section>
+</section>