import MCC-help .xml files from Calenco

1 files changed, 99 insertions, 0 deletions

diff --git a/docs/mcc-help/en/drakx-exitInstal-sect1.xml b/docs/mcc-help/en/drakx-exitInstal-sect1.xml
new file mode 100644
index 00000000..81118d87
--- /dev/null
+++ b/docs/mcc-help/en/drakx-exitInstal-sect1.xml
@@ -0,0 +1,99 @@
+<!-- Converted by db4-upgrade version 1.0 -->
+
+<section xmlns="http://docbook.org/ns/docbook" version="5.0" xml:id="drakxid-exitInstall" ><info><title xml:id="BId-drakxid-exitInstall-ti1">Deprecated - It's Done!</title></info>
+  
+
+  <mediaobject condition="expert">
+    <imageobject>
+      <imagedata align="center" fileref="dx-exitInstall.png" format="PNG" xml:id="BId-drakxid-exitInstall-im1" revision="1" width="11.5cm"/>
+    </imageobject>
+  </mediaobject>
+  
+
+ <para xml:id="BId-drakxid-exitInstall-pa1" revision="3"><indexterm xml:id="BId-drakxid-exitInstall-it1"><primary>boot</primary>
+   <secondary>dual-boot</secondary></indexterm>There you are. The
+   installation is now complete and your <application>GNU/Linux</application> system is ready to
+   be used. Just click on <guibutton>Reboot</guibutton> to restart the
+   system. Don't forget to remove the installation media (<acronym>CD-ROM</acronym> or
+   floppy). The first thing you should see after your computer has
+   finished doing its hardware tests is the bootloader menu, which
+   allows you to choose between the <acronym>OS</acronym>es your
+   system can boot.</para>
+  
+ <section><info><title xml:id="BIdNEW-drakxid-exitInstall-ti2">Advanced Options</title></info>
+  
+
+  <para xml:id="BId-drakxid-exitInstall-pa2" revision="5">The
+   <guibutton>Advanced</guibutton> button shows more buttons
+   to:</para>
+    
+  <orderedlist inheritnum="ignore" continuation="restarts">
+   <listitem>
+    <para xml:id="BId-drakxid-exitInstall-pa3"><indexterm xml:id="BId-drakxid-exitInstall-it2"><primary>floppy</primary>
+      <secondary>auto-install</secondary>
+      </indexterm><guibutton>Generate auto-install floppy</guibutton>:
+      enables you to create an installation floppy disk which will
+      automatically perform a whole installation, similar to the one
+      just finished, without the help of an operator.</para>
+
+    <para xml:id="BId-drakxid-exitInstall-pa4">Note that two different
+     options are available after clicking on that button:</para>
+
+    <itemizedlist>
+     <listitem>
+      <para xml:id="BId-drakxid-exitInstall-pa5"><indexterm xml:id="BId-drakxid-exitInstall-it3">
+	<primary>installation</primary><secondary>replay</secondary>
+	</indexterm><guibutton>Replay</guibutton>. This is a partially
+	automated installation. The partitioning step is the only
+	interactive procedure.</para>
+     </listitem>
+     <listitem>
+      <para xml:id="BId-drakxid-exitInstall-pa6"><indexterm xml:id="BId-drakxid-exitInstall-it4">
+	<primary>installation</primary>
+	<secondary>automated</secondary>
+	</indexterm><guibutton>Automated</guibutton>. Fully automated
+	installation: <emphasis>the hard disk is completely rewritten,
+	all data is lost</emphasis>.</para>
+     </listitem>
+    </itemizedlist>
+
+
+
+    <para xml:id="BIdNEW-drakxid-exitInstall-pa9">This feature is very
+     handy when installing on a number of similar machines. See the
+     <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://www.mandrakelinux.com/drakx/auto_inst.html">Auto
+     install</link> section on our web site for more
+     information.</para>
+   </listitem>
+      
+   <listitem>
+    
+
+    <para xml:id="BId-drakxid-exitInstall-pa7" revision="1"><indexterm xml:id="BId-drakxid-exitInstall-it5">
+      <primary>installation</primary> <secondary>save package
+      selection</secondary> </indexterm><guibutton>Save package
+      selection</guibutton><footnote><para xml:id="BId-drakxid-exitInstall-pa8" revision="3">If you chose to
+      save on a floppy, you will need a <acronym>FAT</acronym>-formatted floppy. To
+      create one under <application>GNU/Linux</application>, type <command>mformat a:</command>
+      or, as root, <command>fdformat /dev/fd0</command> followed by
+      <command>mkfs.vfat /dev/fd0</command>.</para></footnote>: saves
+      a list of the packages selected in this installation. The
+      following screen shows you the possible media to use to save the
+      package list onto: you might need to fill some parameters when
+      you click on the <guilabel>Next</guilabel> button.</para>
+
+    
+
+    <para xml:id="BIdNEW-drakxid-exitInstall-pa10">To use this selection
+     of packages with another installation, perform the installation
+     as usual up to the point of the package selection, and choose to
+     select individual packages, without worrying about the current
+     package selection. Use the floppy icon and select the
+     <guilabel>Load</guilabel> option. Then choose the medium which
+     contains the package list. Finally click
+     <guibutton>OK</guibutton>: the list of packages you loaded will
+     be selected and be installed.</para>
+   </listitem>
+  </orderedlist>
+ </section>
+</section>