aboutsummaryrefslogtreecommitdiffstats
path: root/rc.d
diff options
context:
space:
mode:
Diffstat (limited to 'rc.d')
-rw-r--r--rc.d/init.d/functions414
-rwxr-xr-xrc.d/init.d/halt285
-rwxr-xr-xrc.d/init.d/killall35
-rw-r--r--rc.d/init.d/netconsole2
-rwxr-xr-xrc.d/init.d/netfs192
-rwxr-xr-xrc.d/init.d/network37
-rwxr-xr-xrc.d/init.d/single40
-rwxr-xr-xrc.d/rc150
-rwxr-xr-xrc.d/rc.local13
-rwxr-xr-xrc.d/rc.sysinit1191
10 files changed, 44 insertions, 2315 deletions
diff --git a/rc.d/init.d/functions b/rc.d/init.d/functions
index 48fa2c01..33f9eb20 100644
--- a/rc.d/init.d/functions
+++ b/rc.d/init.d/functions
@@ -61,7 +61,14 @@ systemctl_redirect () {
}
-[ -z "${CONSOLETYPE:-}" ] && CONSOLETYPE="$(/sbin/consoletype <&2)"
+if [ -z "${CONSOLETYPE:-}" ]; then
+ if [ -c "/dev/stderr" -a -r "/dev/stderr" ]; then
+ CONSOLETYPE="$(/sbin/consoletype < /dev/stderr 2>/dev/null)"
+ else
+ CONSOLETYPE="serial"
+ fi
+fi
+
# Get a sane screen width, and default to 80 when exact info not available
[ -z "${COLUMNS:-}" ] && COLUMNS=`stty -a 2>/dev/null | sed -n 's/.*columns \([0-9]*\);.*/\1/p'`
[ -z "${COLUMNS:-}" ] && COLUMNS=80
@@ -176,11 +183,6 @@ inmyroot() {
}
-# Interpret escape sequences in an fstab entry
-fstab_decode_str() {
- fstab-decode echo "$1"
-}
-
# Check if any of $pid (could be plural) are running
checkpid() {
local i
@@ -191,82 +193,6 @@ checkpid() {
return 1
}
-__readlink() {
- ls -bl "$@" 2>/dev/null| awk '{ print $NF }'
-}
-
-__fgrep() {
- s=$1
- f=$2
- while read line; do
- if strstr "$line" "$s"; then
- echo $line
- return 0
- fi
- done < $f
- return 1
-}
-
-# __umount_loop awk_program fstab_file first_msg retry_msg retry_umount_args
-# awk_program should process fstab_file and return a list of fstab-encoded
-# paths; it doesn't have to handle comments in fstab_file.
-__umount_loop() {
- local remaining sig=-15
- local retry=3 count
-
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- while [ -n "$remaining" -a "$retry" -gt 0 ]; do
- if [ "$retry" -eq 3 ]; then
- action "$3" fstab-decode umount $remaining
- else
- action "$4" fstab-decode umount $5 $remaining
- fi
- count=4
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- while [ "$count" -gt 0 ]; do
- [ -z "$remaining" ] && break
- count=$(($count-1))
- usleep 500000
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- done
- [ -z "$remaining" ] && break
- fstab-decode /sbin/fuser -k -m $sig $remaining >/dev/null
- sleep 3
- retry=$(($retry -1))
- sig=-9
- done
-}
-
-# Similar to __umount loop above, specialized for loopback devices
-__umount_loopback_loop() {
- local remaining devremaining sig=-15
- local retry=3
-
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $1}' /proc/mounts)
- while [ -n "$remaining" -a "$retry" -gt 0 ]; do
- if [ "$retry" -eq 3 ]; then
- action "Unmounting loopback filesystems: " \
- fstab-decode umount $remaining
- else
- action "Unmounting loopback filesystems (retry):" \
- fstab-decode umount $remaining
- fi
- for dev in $devremaining ; do
- losetup $dev > /dev/null 2>&1 && \
- action "Detaching loopback device %s: " $dev \
- losetup -d $dev
- done
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $1}' /proc/mounts)
- [ -z "$remaining" ] && break
- fstab-decode /sbin/fuser -k -m $sig $remaining >/dev/null
- sleep 3
- retry=$(($retry -1))
- sig=-9
- done
-}
-
# __proc_pids {program} [pidfile]
# Set $pid to pids from /var/run* for {program}. $pid should be declared
# local in the caller.
@@ -398,7 +324,7 @@ daemon() {
killproc() {
local RC killlevel= base pid pid_file= delay try
- RC=0; delay=3
+ RC=0; delay=3; try=0
# Test syntax.
if [ "$#" -eq 0 ]; then
gprintf "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
@@ -409,7 +335,11 @@ killproc() {
shift 2
fi
if [ "$1" = "-d" ]; then
- delay=$2
+ delay=$(echo $2 | awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$|^[0-9.]*$/?1:$1~/m$/?60:$1~/h$/?60*60:$1~/d$/?24*60*60:-1;if(d==-1) exit 1;delay+=d*$1} END {printf("%d",delay+0.5)}')
+ if [ "$?" -eq 1 ]; then
+ echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+ return 1
+ fi
shift 2
fi
@@ -697,121 +627,6 @@ strstr() {
return 0
}
-
-# Confirm whether we really want to run this service
-confirm() {
- gprintf "Start service %s (Y)es/(N)o/(C)ontinue? [Y] \n" $1
- local YES=`gprintf "yY"`
- local NOT=`gprintf "nN"`
- local CNT=`gprintf "cC"`
- read answer
-
- if strstr "$YES" "$answer" || [ "$answer" = "" ] ; then
- return 0
- elif strstr "$CNT" "$answer" ; then
- return 2
- elif strstr "$NOT" "$answer" ; then
- return 1
- fi
- confirm $*
-}
-
-initsplash() {
- [[ -f /etc/sysconfig/bootsplash ]] && source /etc/sysconfig/bootsplash
- [[ -n $SPLASH ]] && splash_rc=$SPLASH
- [[ -x /sbin/plymouthd ]] || splash_rc=no
- if [ -x /sbin/plymouthd ]; then
- splash_mode=plymouth
- if [ -r /proc/cmdline ] && grep -q splash /proc/cmdline && [ "$splash_rc" != "no" ]; then
- splash_rc=yes
- else
- splash_rc=no
- /bin/plymouth quit 2>/dev/null
- PLYMOUTH=
- fi
- else
- splash_rc=no
- fi
-
- [[ $splash_rc != "no" && $splash_rc != "No" && $splash_rc != "NO" ]] && export splash_rc=yes
- [[ $splash_mode = "plymouth" ]] || splash_rc=
- if [[ -z "$1" ]]; then
- set `/sbin/runlevel`
- __runlevel=$2
- __previous=$1
- else
- __runlevel=$1
- __previous=N
- fi
- [ "$splash_mode" = "plymouth" -a "$splash_rc" = "yes" -a -e /sys/class/graphics/fb0 ] && [ "$__runlevel" = 0 -o "$__runlevel" = 6 ] && /sbin/plymouthd --mode=shutdown
- export splash_mode splash_rc
-}
-
-rc_splash() {
- [[ "$splash_rc" = "yes" ]] || return
- if [ "$splash_mode" = "plymouth" ]; then
- if [ "$1" = "start" ]; then
- /bin/plymouth --show-splash 2>/dev/null
- if [ "$2" = "1" ]; then
- /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Booting the system... Press Esc for verbose mode.'`" 2> /dev/null
- elif [ "$2" = "0" ]; then
- /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Shutting down the system... Press Esc for verbose mode.'`" 2> /dev/null
- else
- /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Restarting the system... Press Esc for verbose mode.'`" 2> /dev/null
- fi
- elif [ "$1" = "stop" -o "$1" = "exit" ]; then
- /bin/plymouth quit 2>/dev/null
- elif [ "$1" = "umount" ]; then
- /bin/plymouth quit --retain-splash 2>/dev/null
- elif [ "$1" = "verbose" ]; then
- /bin/plymouth --hide-splash 2>/dev/null
- else
- /bin/plymouth --update "$1" 2>/dev/null
- fi
- fi
-}
-
-#
-# This function finds the encoding of the current locale (it can
-# be overwritten by a "CHARSET" variable if needed); the call
-# to "locale charmap" should return the proper value; in case it
-# fails, a guess from the locale name is done.
-# this function is also defined in setsysfont script
-# if you change it here change it there too, to have the same behaviour
-#
-get_locale_encoding() {
- CHARSET=${CHARSET=`LC_ALL=$GP_LANG locale charmap 2> /dev/null`}
- case "$CHARSET" in
- ANSI_X3.4-1968)
- # this means that the locale has not been
- # correctly initialized; we will look at the
- # locale naming and use the known
- # default values for various languages
- case "${LC_ALL}${LC_CTYPE}${LANG}" in
- # the locale tells it is in UTF-8, or it is a language
- # we know must be in UTF-8 by default
- *.utf8*|*.UTF-8*| \
- am*|an*|ar*|as*|az*|bn*|cy*|eo*|fa*|gn*|gu*|he*|hi*|hy*| \
- id*|ka*|kn*|ku*|ky*|lo*|m*|ne*|om*|pa*|ph*|se*|sr*|st*| \
- ta*|te*|tg*|ti*|tk*|tl*|tt*|ug*|ur*|uz*|vi*|xh*|y*)
- CHARSET="UTF-8" ;;
- esac
- ;;
- esac
- echo "$CHARSET"
-}
-
-# resolve a device node to its major:minor numbers in decimal or hex
-get_numeric_dev() {
-(
- fmt="%d:%d"
- if [ "$1" = "hex" ]; then
- fmt="%x:%x"
- fi
- ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
-) 2>/dev/null
-}
-
# Check whether file $1 is a backup or rpm-generated file and should be ignored
is_ignored_file() {
case "$1" in
@@ -844,187 +659,26 @@ is_false() {
# Apply sysctl settings, including files in /etc/sysctl.d
apply_sysctl() {
- sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
- for file in /etc/sysctl.d/* ; do
- is_ignored_file "$file" && continue
- test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
- done
-}
-
-key_is_random() {
- [ "$1" = "/dev/urandom" -o "$1" = "/dev/hw_random" \
- -o "$1" = "/dev/random" ]
-}
-
-find_crypto_mount_point() {
- local fs_spec fs_file fs_vfstype remaining_fields
- local fs
- while read fs_spec fs_file remaining_fields; do
- if [ "$fs_spec" = "/dev/mapper/$1" ]; then
- echo $fs_file
- break;
- fi
- done < /etc/fstab
-}
-
-# Because of a chicken/egg problem, init_crypto must be run twice. /var may be
-# encrypted but /var/lib/random-seed is needed to initialize swap.
-init_crypto() {
- local have_random dst src key opt lsl owner params makeswap skip arg opt
- local param value rc ret mke2fs mdir prompt mount_point
-
- ret=0
- have_random=$1
- while read dst src key opt; do
- [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
- [ -b "/dev/mapper/$dst" ] && continue;
- if [ "$have_random" = 0 ] && key_is_random "$key"; then
- continue
- fi
- if [ -n "$key" -a "x$key" != "xnone" ]; then
- if test -e "$key" ; then
- owner=$(ls -l $key | (read a b owner rest; echo $owner))
- if ! key_is_random "$key"; then
- lsl=$(ls -l "$key")
- if [ "${lsl:4:6}" != "------" ]; then
- gprintf "INSECURE MODE FOR %s\n" $key
- fi
- fi
- if [ "$owner" != root ]; then
- gprintf "INSECURE OWNER FOR %s\n" $key
- fi
- else
- gprintf "Key file for %s not found, skipping\n" $dst
- ret=1
- continue
- fi
- else
- key=""
- fi
- params=""
- makeswap=""
- mke2fs=""
- skip=""
- # Parse the src field for UUID= and convert to real device names
- if [ "${src%%=*}" == "UUID" ]; then
- src=$(/sbin/blkid -t "$src" -l -o device)
- elif [ "${src/^\/dev\/disk\/by-uuid\/}" != "$src" ]; then
- src=$(__readlink $src)
- fi
- # Is it a block device?
- [ -b "$src" ] || continue
- # Is it already a device mapper slave? (this is gross)
- devesc=${src##/dev/}
- devesc=${devesc//\//!}
- for d in /sys/block/dm-*/slaves ; do
- [ -e $d/$devesc ] && continue 2
- done
- # Parse the options field, convert to cryptsetup parameters and
- # contruct the command line
- while [ -n "$opt" ]; do
- arg=${opt%%,*}
- opt=${opt##$arg}
- opt=${opt##,}
- param=${arg%%=*}
- value=${arg##$param=}
-
- case "$param" in
- cipher)
- params="$params -c $value"
- if [ -z "$value" ]; then
- gprintf "%s: no value for cipher option, skipping\n" $dst
- skip="yes"
- fi
- ;;
- size)
- params="$params -s $value"
- if [ -z "$value" ]; then
- gprintf "%s: no value for size option, skipping\n" $dst
- skip="yes"
- fi
- ;;
- hash)
- params="$params -h $value"
- if [ -z "$value" ]; then
- gprintf "%s: no value for hash option, skipping\n" $dst
- skip="yes"
- fi
- ;;
- noauto)
- skip="yes"
- ;;
- verify)
- params="$params -y"
- ;;
- swap)
- makeswap=yes
- ;;
- tmp)
- mke2fs=yes
- esac
- done
- if [ "$skip" = "yes" ]; then
- ret=1
- continue
- fi
- if [ -z "$makeswap" ] && cryptsetup isLuks "$src" 2>/dev/null ; then
- if key_is_random "$key"; then
- gprintf "%s: LUKS requires non-random key, skipping\n" $dst
- ret=1
- continue
- fi
- if [ -n "$params" ]; then
- echo "$dst: options are invalid for LUKS partitions," \
- "ignoring them"
- fi
- if [ -n "$key" ]; then
- /sbin/cryptsetup -d $key luksOpen "$src" "$dst" <&1 2>/dev/null && success || failure
- rc=$?
- else
- mount_point="$(find_crypto_mount_point $dst)"
- [ -n "$mount_point" ] || mount_point=${src##*/}
- prompt=$(printf $"%s is password protected" "$mount_point")
- if [ "$splash_rc" = yes ] && [ -d /usr/share/plymouth ]; then
- plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup luksOpen -T1 $src $dst" --number-of-tries=3 <&1
- rc=$?
- else
- # stop splash to ask for password
- rc_splash verbose
- /sbin/cryptsetup luksOpen "$src" "$dst" <&1 && success || failure
- rc=$?
- fi
- fi
- else
- if [ -z "$key" ]; then
- mount_point="$(find_crypto_mount_point $dst)"
- [ -n "$mount_point" ] || mount_point=${src##*/}
- prompt=$(printf $"%s is password protected" "$mount_point")
- plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup $params create $dst $src" <&1
- rc=$?
- else
- /sbin/cryptsetup $params ${key:+-d $key} create "$dst" "$src" <&1 2>/dev/null && success || failure
- rc=$?
- fi
- fi
- if [ $rc -ne 0 ]; then
- ret=1
- continue
- fi
- if [ -b "/dev/mapper/$dst" ]; then
- if [ "$makeswap" = "yes" ]; then
- mkswap "/dev/mapper/$dst" 2>/dev/null >/dev/null
- fi
- if [ "$mke2fs" = "yes" ]; then
- if mke2fs "/dev/mapper/$dst" 2>/dev/null >/dev/null \
- && mdir=$(mktemp -d /tmp/mountXXXXXX); then
- mount "/dev/mapper/$dst" "$mdir" && chmod 1777 "$mdir"
- umount "$mdir"
- rmdir "$mdir"
- fi
- fi
- fi
- done < /etc/crypttab
- return $ret
+ if [ -x /lib/systemd/systemd-sysctl ]; then
+ /lib/systemd/systemd-sysctl
+ else
+ for file in /usr/lib/sysctl.d/*.conf ; do
+ is_ignored_file "$file" && continue
+ [ -f /run/sysctl.d/${file##*/} ] && continue
+ [ -f /etc/sysctl.d/${file##*/} ] && continue
+ test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
+ done
+ for file in /run/sysctl.d/*.conf ; do
+ is_ignored_file "$file" && continue
+ [ -f /etc/sysctl.d/${file##*/} ] && continue
+ test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
+ done
+ for file in /etc/sysctl.d/*.conf ; do
+ is_ignored_file "$file" && continue
+ test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
+ done
+ sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
+ fi
}
# A sed expression to filter out the files that is_ignored_file recognizes
diff --git a/rc.d/init.d/halt b/rc.d/init.d/halt
deleted file mode 100755
index 80deb629..00000000
--- a/rc.d/init.d/halt
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/bin/bash
-#
-# halt This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
-#
-# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-# Modified for RHS Linux by Damien Neil
-#
-
-NOLOCALE=1
-. /etc/init.d/functions
-
-UMOUNT="umount"
-[ ! -w /etc ] && UMOUNT="umount -n"
-
-halt_crypto() {
- fnval=0
- while read dst src key; do
- [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
- if [ -b "/dev/mapper/$dst" ]; then
- if /sbin/dmsetup info "$dst" | grep -q '^Open count: *0$'; then
- action "Stopping disk encryption for %s" $dst /sbin/cryptsetup remove "$dst"
- else
- fnval=1
- fi
- fi
- done < /etc/crypttab
- return $fnval
-}
-
-kill_all() {
- /sbin/killall5 "$@"
- rc=$?
- if [ "$rc" == 1 ]; then
- return 1
- fi
- return 0
-}
-
-# See how we were called.
-case "$0" in
- *halt)
- message=`gprintf "Halting system..."`
- command="/sbin/halt"
- ;;
- *reboot)
- message=`gprintf "Please stand by while rebooting the system..."`
- command="/sbin/reboot"
- kexec_command="/sbin/kexec"
- ;;
- *)
- gprintf "%s: call me as 'halt' or 'reboot' please!\n" $0
- exit 1
- ;;
-esac
-case "$1" in
- *start)
- ;;
- *)
- gprintf "Usage: %s\n" "$(basename $0) {start}"
- exit 1
- ;;
-esac
-
-# Recreate the /initrd if needed
-if [ ! -d /initrd ]; then
- action "Creating initrd directory" mkdir /initrd
-fi
-if [ -d /initrd -a ! -f /initrd/README.WARNING ]; then
- cat > /initrd/README.WARNING <<EOF
-(mkinitrd) Don't remove this directory, it's needed at boot time,
-in the initrd, to perform the pivot_root.
-EOF
-fi
-
-update_boot_stage kill
-
-# Kill all processes.
-[ "${BASH+bash}" = bash ] && enable kill
-
-OMITPIDS=
-omitfile=/var/run/sendsigs.omit
-if [ -e $omitfile ]; then
- for pid in $(cat $omitfile); do
- OMITPIDS="${OMITPIDS:+$OMITPIDS }-o $pid"
- done
-fi
-# Find mdmon pid's and omit killing them
-OMITARGS=
-for i in /dev/.mdadm/*.pid; do
- if [ "$i" = "mdadm.pid" -o ! -r "$i" ]; then
- continue
- fi
- OMITARGS="$OMITARGS -o $(cat $i)"
-done
-
-
-action "Sending all processes the TERM signal..." kill_all -15 $OMITPIDS $OMITARGS
-alldead=""
-for i in 0 1 2 3 4 5 6 7 8 9 10; do
- # use SIGCONT/signal 18 to check if there are
- # processes left. No need to check the exit code
- # value, because either killall5 work and it make
- # sense to wait for processes to die, or it fail and
- # there is nothing to wait for.
- if /sbin/killall5 -18 $OMITPIDS $OMITARGS; then
- :
- else
- alldead=1
- break
- fi
-
- sleep 1
-done
-# No need to sleep and kill -9 if no processes to kill were found
-if [ -z "$alldead" ]; then
- action "Sending all processes the KILL signal..." kill_all -9 $OMITPIDS $OMITARGS
-fi
-
-# Write to wtmp file before unmounting /var
-/sbin/halt -w
-
-# Save mixer settings, here for lack of a better place.
-if [ -x /sbin/alsactl ]; then
- action "Saving mixer settings" /sbin/alsactl --ignore store
-fi
-
-# Save random seed
-touch /var/lib/random-seed
-chmod 600 /var/lib/random-seed
-action "Saving random seed: " dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-
-update_boot_stage clock
-[ -x /sbin/hwclock ] && action "Syncing hardware clock to system time" /sbin/hwclock --systohc
-
-if [ -x /sbin/halt.pre ]; then
- /sbin/halt.pre
-fi
-
-update_boot_stage umount
-
-# Try to unmount tmpfs filesystems to avoid swapping them in. Ignore failures.
-tmpfs=$(awk '$2 ~ /^\/($|proc|dev)/ { next; }
- $3 == "tmpfs" { print $2; }' /proc/mounts | sort -r)
-[ -n "$tmpfs" ] && fstab-decode $UMOUNT $tmpfs 2>/dev/null
-
-# Turn off swap, then unmount file systems.
-[ -f /proc/swaps ] && SWAPS=$(awk '! /^Filename/ { print $1 }' /proc/swaps)
-if [ -n "$SWAPS" ]; then
- action "Turning off swap: " swapoff $SWAPS
- for dst in $SWAPS; do
- if [[ "$dst" == /dev/mapper* ]] \
- && [ "$(dmsetup status "$dst" | cut -d ' ' -f 3)" = crypt ]; then
- backdev=$(/sbin/cryptsetup status "$dst" \
- | awk '$1 == "device:" { print $2 }')
- /sbin/cryptsetup remove "$dst"
- fi
- done
-fi
-
-[ -x /sbin/quotaoff ] && action "Turning off quotas: " /sbin/quotaoff -aug
-
-# Only adjust mtab if it's not a symbolic link
-if [ ! -L /etc/mtab ]; then
- # first remove entry /initrd/loopfs as it can't be unmounted :(
- mtab=$(fgrep -v "/initrd/loopfs[^/]" /etc/mtab)
- (IFS= ; echo $mtab > /etc/mtab)
-fi
-
-# Unmount file systems, killing processes if we have to.
-# Unmount loopback stuff first
-__umount_loopback_loop
-
-# Unmount RPC pipe file systems
-__umount_loop '$3 ~ /^rpc_pipefs$/ || $3 ~ /^rpc_svc_gss_pipefs$/ {print $2}' \
- /proc/mounts \
- "Unmounting pipe file systems: " \
- "Unmounting pipe file systems (retry): " \
- -f
-
-LANG=C __umount_loop '$2 ~ /^\/$|^\/proc|^\/cgroup|^\/sys\/fs\/cgroup|^\/dev/{next}
- $2 ~ /^\/live\//{next}
- $3 == "tmpfs" || $3 == "proc" {print $2 ; next}
- $3 ~ /(loopfs|autofs|nfs|cifs|smbfs|ncpfs|sysfs)/ {next}
- /(^none|^\/dev\/ram|^\/dev\/root$)/ {next}
- {print $2}' /proc/mounts \
- "Unmounting file systems: " \
- "Unmounting file systems (retry): " \
- -f
-
-
-update_boot_stage lvm
-
-# stop crypto devices before lvm, as they can sit on top of LVM
-[ -f /etc/crypttab ] && halt_crypto
-
-if [ -f /etc/lvm/lvm.conf -a -x /sbin/lvm2 ]; then
- if grep -q -s 'device-mapper' /proc/devices; then
- _vgchange_cmd="/sbin/lvm2 vgchange -a n"
- fi
-fi
-
-if [ -z "${_vgscan_cmd}" -a -f /etc/lvmtab -a -e /proc/lvm ] ; then
- if [ -x /sbin/lvm1-vgchange ]; then
- _vgchange_cmd="/sbin/lvm1-vgchange -a n"
- elif [ -x /sbin/vgchange ]; then
- _vgchange_cmd="/sbin/vgchange -a n"
- fi
-fi
-
-if [ -n "${_vgchange_cmd}" ]; then
- action "Shutting down LVM:" ${_vgchange_cmd}
-fi
-
-# for NUT
-# do it here to have /proc/usb mounted for UPS on USB
-if [ -f /etc/init.d/upsd ]; then
- /etc/init.d/upsd powerdown
- [ $? == 3 ] && exit 1
-fi
-
-[ -f /proc/bus/usb/devices ] && $UMOUNT /proc/bus/usb
-
-# remove the crash indicator flag
-rm -f /.autofsck
-
-update_boot_stage umount_force
-
-# Try all file systems other than root, essential filesystems and RAM disks,
-# one last time.
-# eugeni: we should umount the filesystems in reverse order (#53042)
-tac /proc/mounts | awk '$2 !~ /\/(|dev|proc|selinux|cgroup|sys)$/ && $2 !~ /^\/live\// && $1 !~ /(^\/dev\/ram|cgroup)/ { print $2 }' | \
- while read line; do
- fstab-decode $UMOUNT -f $line
-done
-
-if [ -x /sbin/halt.local ]; then
- /sbin/halt.local
-fi
-
-update_boot_stage remount_ro
-
-# Remount read only anything that's left mounted.
-# echo $"Remounting remaining filesystems readonly"
-mount | awk '{ print $1,$3 }' | while read dev dir; do
- fstab-decode mount -n -o ro,remount $dev $dir
-done
-
-# (bor) it is impossible under systemd and is not required otherwise
-# action "Unmounting proc file system: " umount /proc
-
-# See if this is a powerfail situation.
-if [ -f /etc/apcupsd/powerfail ]; then
- gprintf "APCUPSD will now power off the UPS!\n"
- echo
- /etc/apcupsd/apccontrol killpower
- echo
- gprintf "Please ensure that the UPS has powered off before rebooting\n"
- gprintf "Otherwise, the UPS may cut the power during the reboot!!!\n"
- echo
-fi
-
-update_boot_stage halt
-
-# If we left mdmon's running wait for the raidsets to become clean
-if [ -n "$OMITARGS" ]; then
- mdadm --wait-clean --scan
-fi
-
-# Now halt or reboot.
-echo "$message"
-if [ -f /fastboot ]; then
- gprintf "On the next boot fsck will be skipped.\n"
-elif [ -f /forcefsck ]; then
- gprintf "On the next boot fsck will be forced.\n"
-fi
-
-# First, try kexec. If that fails, fall back to rebooting the old way.
-[ -n "$kexec_command" ] && $kexec_command -e -x >& /dev/null
-
-HALTARGS="-i -d"
-[ "$INIT_HALT" != "HALT" ] && HALTARGS="$HALTARGS -p"
-
-exec $command $HALTARGS
diff --git a/rc.d/init.d/killall b/rc.d/init.d/killall
deleted file mode 100755
index 574f4f6f..00000000
--- a/rc.d/init.d/killall
+++ /dev/null
@@ -1,35 +0,0 @@
-#! /bin/bash
-
-# Bring down all unneeded services that are still running (there shouldn't
-# be any, so this is just a sanity check)
-
-case "$1" in
- *start)
- ;;
- *)
- gprintf "Usage: %s {start}\n" $0
- exit 1
- ;;
-esac
-
-
-for i in /var/lock/subsys/* ; do
- # Check if the script is there.
- [ -f "$i" ] || continue
-
- # Get the subsystem name.
- subsys=${i#/var/lock/subsys/}
-
- # Networking could be needed for NFS root.
- [ $subsys = network ] && continue
-
- # Bring the subsystem down.
- if [ -f /etc/init.d/$subsys ]; then
- /etc/init.d/$subsys stop
- elif [ -f /etc/init.d/$subsys.init ]; then
- /etc/init.d/$subsys.init stop
- else
- rm -f "$i"
- fi
-done
-exit 0
diff --git a/rc.d/init.d/netconsole b/rc.d/init.d/netconsole
index 14f96d76..63e23897 100644
--- a/rc.d/init.d/netconsole
+++ b/rc.d/init.d/netconsole
@@ -63,7 +63,7 @@ print_address_info ()
target=$host
fi
if [ -z "$SYSLOGMACADDR" ]; then
- arp=$(LANG=C /sbin/arping -c 1 -I $DEV $target 2>/dev/null | awk '/ reply from .*[.*]/ { print gensub(".* reply from .* \\[(.*)\\].*","\\1","G"); exit }')
+ arp=$(LANG=C /sbin/arping -f -c 1 -I $DEV $target 2>/dev/null | awk '/ reply from .*[.*]/ { print gensub(".* reply from .* \\[(.*)\\].*","\\1","G"); exit }')
[ -n "$arp" ] && echo "SYSLOGMACADDR=$arp"
fi
}
diff --git a/rc.d/init.d/netfs b/rc.d/init.d/netfs
deleted file mode 100755
index 2a37ce76..00000000
--- a/rc.d/init.d/netfs
+++ /dev/null
@@ -1,192 +0,0 @@
-#!/bin/bash
-#
-# netfs Mount network filesystems.
-#
-# Authors: Bill Nottingham <notting@redhat.com>
-# AJ Lewis <alewis@redhat.com>
-# Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#
-# chkconfig: 345 25 75
-# description: Mounts and unmounts all Network File System (NFS), \
-# CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
-#
-### BEGIN INIT INFO
-# Provides: $remote_fs
-# Required-Start: $network
-# Should-Start: $portmap nfs-common
-# Required-Stop: $network
-# Should-Stop: $portmap nfs-common
-# Default-Start: 3 4 5
-# Short-Description: Mount network filesystems.
-# Description: Mounts and unmounts all Network File System (NFS),
-# SMB/CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
-### END INIT INFO
-
-[ -f /etc/sysconfig/network ] || exit 0
-. /etc/init.d/functions
-. /etc/sysconfig/network
-
-NFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 ~ /^nfs/ && $3 != "nfsd" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-CIFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "cifs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-NCPFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "ncpfs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-NETDEVFSTAB=$(LC_ALL=C awk '!/^#/ && $4 ~/_netdev/ && $4 !~ /noauto/ { print $1 }' /etc/fstab)
-
-NFSMTAB=$(LC_ALL=C awk '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" { print $2 }' /proc/mounts)
-CIFSMTAB=$(LC_ALL=C awk '$3 == "cifs" { print $2 }' /proc/mounts | tac)
-NCPMTAB=$(LC_ALL=C awk '$3 == "ncpfs" { print $2 }' /proc/mounts | tac)
-NETDEVMTAB=$(LC_ALL=C awk '$4 ~ /_netdev/ && $2 != "/" { print $2 }' /etc/mtab)
-
-# See how we were called.
-case "$1" in
- start)
- [ ! -f /var/lock/subsys/network ] && ! nm-online -x >/dev/null 2>&1 && exit 0
- [ "$EUID" != "0" ] && exit 4
- [ -n "$NFSFSTAB" ] &&
- {
- action "Mounting NFS filesystems: " mount -a -t nfs,nfs4
- }
- [ -n "$CIFSFSTAB" ] && action "Mounting CIFS filesystems: " mount -a -t cifs
- [ -n "$NCPFSTAB" ] && action "Mounting NCP filesystems: " mount -a -t ncpfs
- [ -n "$NETDEVFSTAB" ] &&
- {
- if [ -f /etc/mdadm.conf ] && [ -x /sbin/mdadm ]; then
- /sbin/mdadm -A -s
- fi
- if [ -f /etc/multipath.conf ] && [ -x /sbin/multipath ]; then
- modprobe dm-multipath >/dev/null 2>&1
- /sbin/multipath -u -v 0
- if [ -x /sbin/kpartx ]; then
- /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -u -a -p p"
- fi
- fi
- if [ -x /sbin/lvm ]; then
- if /sbin/lvm vgscan > /dev/null 2>&1 ; then
- action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y
- fi
- fi
-
- if [ -f /etc/crypttab ]; then
- init_crypto 1
- fi
-
- STRING=`gprintf "Checking network-attached filesystems"`
-
- echo $STRING
- fsck -A -T -R -a -t opts=_netdev
- rc=$?
-
- if [ "$rc" -eq "0" ]; then
- success "$STRING"
- echo
- elif [ "$rc" -eq "1" ]; then
- passed "$STRING"
- echo
- fi
-
- if [ "$rc" -gt 1 ]; then
- if [ -x /bin/plymouth ] && /bin/plymouth --ping ; then
- /bin/plymouth --hide-splash
- fi
- failure "$STRING"
- tty >/dev/null 2>&1 || exit 1
- echo
- echo
- gprintf "*** An error occurred during the file system check.\n"
- gprintf "*** Dropping you to a shell; the system will reboot\n"
- gprintf "*** when you leave the shell.\n"
-
- str=`gprintf "(Repair filesystem)"`
- PS1="$str \# # "; export PS1
- [ "$SELINUX" = "1" ] && disable_selinux
- sulogin
-
- shutdown -r now
- fi
- }
- touch /var/lock/subsys/netfs
- # The 'no' applies to all listed filesystem types. See mount(8).
- action $"Mounting other filesystems: " mount -a -t nonfs,nfs4,cifs,ncpfs,gfs2 -O noencrypted
- ;;
- stop)
- # Unmount loopback stuff first
- [ "$EUID" != "0" ] && exit 4
- __umount_loopback_loop
- if [ -n "$NETDEVMTAB" ]; then
- __umount_loop '$4 ~ /_netdev/ && $2 != "/" {print $2}' \
- /etc/mtab \
- "Unmounting network block filesystems: " \
- "Unmounting network block filesystems (retry): "
- fi
- if [ -n "$NFSMTAB" ]; then
- __umount_loop '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" {print $2}' \
- /proc/mounts \
- "Unmounting NFS filesystems: " \
- "Unmounting NFS filesystems (retry): " \
- "-f -l"
- fi
- if [ -n "$CIFSMTAB" ]; then
- for MNT in $CIFSMTAB; do
- action $"Unmounting CIFS filesystem: $MNT" umount "$MNT"
- done
- fi
- if [ -n "$NCPMTAB" ]; then
- for MNT in $NCPMTAB; do
- action $"Unmounting NCP filesystem: $MNT" umount "$MNT"
- done
- fi
- rm -f /var/lock/subsys/netfs
- ;;
- status)
- if [ -f /proc/mounts ] ; then
- [ -n "$NFSFSTAB" ] && {
- gprintf "Configured NFS mountpoints: \n"
- for fs in $NFSFSTAB; do echo $fs ; done
- }
- [ -n "$CIFSFSTAB" ] && {
- gprintf "Configured CIFS mountpoints: \n"
- for fs in $CIFSFSTAB; do echo $fs ; done
- }
- [ -n "$NCPFSTAB" ] && {
- gprintf "Configured NCP mountpoints: \n"
- for fs in $NCPFSTAB; do echo $fs ; done
- }
- [ -n "$NETDEVFSTAB" ] && {
- gprintf "Configured network block devices: \n"
- for fs in $NETDEVFSTAB; do echo $fs ; done
- }
- [ -n "$NFSMTAB" ] && {
- gprintf "Active NFS mountpoints: \n"
- for fs in $NFSMTAB; do echo $fs ; done
- }
- [ -n "$CIFSMTAB" ] && {
- gprintf "Active CIFS mountpoints: \n"
- for fs in $CIFSMTAB; do echo $fs ; done
- }
- [ -n "$NCPMTAB" ] && {
- gprintf "Active NCP mountpoints: \n"
- for fs in $NCPMTAB; do echo $fs ; done
- }
- [ -n "$NETDEVMTAB" ] && {
- gprintf "Active network block devices: \n"
- for fs in $NETDEVMTAB; do echo $fs ; done
- }
- else
- gprintf "/proc filesystem unavailable\n"
- fi
- [ -r /var/lock/subsys/netfs ] || exit 3
- ;;
- restart)
- $0 stop
- $0 start
- exit $?
- ;;
- reload)
- $0 start
- exit $?
- ;;
- *)
- gprintf "Usage: %s\n" "$(basename $0) {start|stop|restart|reload|status}"
- exit 2
-esac
-
-exit 0
diff --git a/rc.d/init.d/network b/rc.d/init.d/network
index fbe67dd9..0da31c60 100755
--- a/rc.d/init.d/network
+++ b/rc.d/init.d/network
@@ -157,22 +157,6 @@ case "$1" in
is_available $i
continue
fi
- # If we're in confirmation mode, get user confirmation.
- [ -f /var/run/confirm ] &&
- {
- confirm $i
- case $? in
- 0)
- :
- ;;
- 2)
- CONFIRM=
- ;;
- *)
- continue
- ;;
- esac
- }
action "Bringing up interface %s: " $i ./ifup $DEVICE boot
[ $? -ne 0 ] && rc=1
done
@@ -180,11 +164,6 @@ case "$1" in
# Bring up xDSL and VPN interfaces
for i in $vlaninterfaces $bridgeinterfaces $xdslinterfaces $vpninterfaces ; do
if ! LANG=C grep -EL "^ONBOOT=['\"]?[Nn][Oo]['\"]?" "ifcfg-$i" >/dev/null 2>&1 ; then
- # If we're in confirmation mode, get user confirmation.
- if [ -f /var/run/confirm ]; then
- confirm $i
- test $? = 1 && continue
- fi
action "Bringing up interface %s: " $i ./ifup $i boot
[ $? -ne 0 ] && rc=1
fi
@@ -192,9 +171,13 @@ case "$1" in
# Add non interface-specific static-routes.
if [ -f /etc/sysconfig/static-routes ]; then
- grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do
- /sbin/route add -$args
- done
+ if [ -x /sbin/route ]; then
+ grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do
+ /sbin/route add -$args
+ done
+ else
+ net_log $"Legacy static-route support not available: /sbin/route not found"
+ fi
fi
# IPv6 hook (post IPv4 start)
@@ -220,10 +203,8 @@ case "$1" in
# If this is a final shutdown/halt, check for network FS,
# and unmount them even if the user didn't turn on netfs
if [ "$RUNLEVEL" = "6" -o "$RUNLEVEL" = "0" -o "$RUNLEVEL" = "1" ]; then
- NFSMTAB=$(LC_ALL=C awk '$3 ~ /^nfs/ { print $2 }' /proc/mounts)
- SMBMTAB=$(LC_ALL=C awk '$3 == "smbfs" { print $2 }' /proc/mounts)
- NCPMTAB=$(LC_ALL=C awk '$3 == "ncpfs" { print $2 }' /proc/mounts)
- if [ -n "$NFSMTAB" -o -n "$SMBMTAB" -o -n "$NCPMTAB" ] ; then
+ NETMOUNTS=$(findmnt -n -m -t nfs,nfs4,smbfs,ncpfs,cifs 2>/dev/null)
+ if [ -n "$NETMOUNTS" ] ; then
/etc/init.d/netfs stop
fi
fi
diff --git a/rc.d/init.d/single b/rc.d/init.d/single
deleted file mode 100755
index 8f37963a..00000000
--- a/rc.d/init.d/single
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash
-#
-#
-# rc.single This file is executed by init when it goes into runlevel
-# 1, which is the administrative state. It kills all
-# deamons and then puts the system into single user mode.
-# Note that the file systems are kept mounted.
-#
-# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-# Modified for RHS Linux by Damien Neil
-#
-
-. /etc/init.d/functions
-
-if [ "$1" != "start" ]; then
- exit 0
-fi
-
-# killing splashy (#46169)
-update_boot_stage exit
-
-# Kill all processes.
-[ "${BASH+bash}" = bash ] && enable kill
-
-gprintf "Sending all processes the TERM signal...\n"
-kill -15 -1
-sleep 5
-gprintf "Sending all processes the KILL signal..\n"
-kill -9 -1
-
-# this looks nicer
-[ -x /usr/bin/clear ] && /usr/bin/clear
-
-# Now go to the single user level.
-gprintf "Telling INIT to go to single user mode.\n"
-
-# init hangs if LANG is set
-unset LANG
-
-exec init -t1 S
diff --git a/rc.d/rc b/rc.d/rc
deleted file mode 100755
index a21e4fb2..00000000
--- a/rc.d/rc
+++ /dev/null
@@ -1,150 +0,0 @@
-#! /bin/bash
-#
-# rc This file is responsible for starting/stopping
-# services when the runlevel changes.
-#
-# Original Author:
-# Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#
-
-set -m
-
-# check a file to be a correct runlevel script
-check_runlevel ()
-{
- # Check if the file exists at all.
- [ -x "$1" ] || return 1
- is_ignored_file "$1" && return 1
- return 0
-}
-
-# Now find out what the current and what the previous runlevel are.
-argv1="$1"
-set $(/sbin/runlevel)
-runlevel=$2
-previous=$1
-export runlevel previous
-
-# Get first argument. Set new runlevel to this argument.
-if [ "$argv1" != "" ] ; then
- newrunlevel="$argv1"
-else
- newrunlevel="$runlevel"
-fi
-
-if [ "$previous" = "N" ];then
- if [ -e /var/run/failsafe ];then
- rm -f /var/run/failsafe
- if [ -x /sbin/askrunlevel ];then
- /sbin/askrunlevel --interactive && ASKRUNLEVEL=no
- else
- init 1 #jump to init 1 if not aksrunlevel.
- fi
- fi
-fi
-
-. /etc/init.d/functions
-
-export CONSOLETYPE
-do_confirm="no"
-if [ -f /var/run/confirm ]; then
- do_confirm="yes"
-fi
-UPSTART=
-[ -x /sbin/initctl ] && UPSTART=yes
-# See if we want to be in user confirmation mode
-if [ "$previous" = "N" ]; then
- if [ "$do_confirm" = "yes" ]; then
- gprintf "Entering interactive startup\n"
- else
- gprintf "Entering non-interactive startup\n"
- fi
-elif [[ "$newrunlevel" = "0" || "$newrunlevel" = "6" ]]; then
- [ -x /etc/rc.d/init.d/dm -a -f /var/lock/subsys/dm ] && /etc/init.d/dm stop 2> /dev/null
- chvt --userwait 1
- exec &> /dev/console
-fi
-
-# Get first argument. Set new runlevel to this argument.
-[ -n "$argv1" ] && runlevel="$argv1"
-
-# Is there an rc directory for this new runlevel?
-[ -d /etc/rc$runlevel.d ] || exit 0
-
-# Set language, vc settings once to avoid doing it for every init script
-# through functions
-if [ -z "${NOLOCALE:-}" ] && [ -f /etc/sysconfig/i18n -o -f /etc/locale.conf ] ; then
- . /etc/profile.d/10lang.sh 2>/dev/null
- export LANGSH_SOURCED=1
-fi
-
-initsplash
-[[ "$newrunlevel" = "0" || "$newrunlevel" = "6" ]] && [ "$splash_mode" = "plymouth" ] && rc_splash start $newrunlevel
-
-nopinit=`grep nopinit /proc/cmdline`
-
-rc_mode=K
-export rc_mode
-
-# First, run the KILL scripts.
-if [ -z "$nopinit" ]; then
- /sbin/prcsys K /etc/rc$runlevel.d/
-else
- for i in /etc/rc$runlevel.d/K* ; do
-
- # Check if the subsystem is already up.
- subsys=${i#/etc/rc$runlevel.d/K??}
- [ -f /var/lock/subsys/$subsys ] || [ -f /var/lock/subsys/$subsys.init ] || continue
- check_runlevel "$i" || continue
-
- update_boot_stage "$subsys"
- # Bring the subsystem down.
- [ -n "$UPSTART" ] && initctl emit --quiet stopping JOB=$subsys
- action "Stopping %s: " $subsys $i stop
- [ -n "$UPSTART" ] && initctl emit --quiet stopped JOB=$subsys
- done
-fi
-
-rc_mode=S
-
-if [ -z "$nopinit" ] && [ "$do_confirm" != "yes" -a "$runlevel" != "0" -a "$runlevel" != "1" -a "$runlevel" != "6" ]; then
- /sbin/prcsys S /etc/rc$runlevel.d/
-else
- # Now run the START scripts.
- for i in /etc/rc$runlevel.d/S* ; do
-
- # Check if the subsystem is already up.
- subsys=${i#/etc/rc$runlevel.d/S??}
- [ -f /var/lock/subsys/$subsys ] && continue
- [ -f /var/lock/subsys/$subsys.init ] && continue
- check_runlevel "$i" || continue
-
- # If we're in confirmation mode, get user confirmation
- if [ "$do_confirm" = "yes" ]; then
- confirm $subsys
- rc=$?
- if [ "$rc" = "1" ]; then
- continue
- elif [ "$rc" = "2" ]; then
- do_confirm="no"
- fi
- fi
-
- update_boot_stage "$subsys"
- # Bring the subsystem up.
- [ -n "$UPSTART" ] && initctl emit --quiet starting JOB=$subsys
- if [ "$subsys" = "halt" -o "$subsys" = "reboot" ]; then
- export LC_ALL=C
- exec $i start
- fi
- action "Starting %s: " $subsys $i start
- [ -n "$UPSTART" ] && initctl emit --quiet started JOB=$subsys
-
- done
-fi
-
-if [[ "$newrunlevel" != "0" && "$newrunlevel" != "6" && "$newrunlevel" != "S" && "$newrunlevel" != "5" ]]; then
- rc_splash stop
-fi
-[ "$do_confirm" = "yes" ] && rm -f /var/run/confirm
-exit 0
diff --git a/rc.d/rc.local b/rc.d/rc.local
deleted file mode 100755
index cf1cf8dc..00000000
--- a/rc.d/rc.local
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-### BEGIN INIT INFO
-# Provides: rc.local
-# X-Mandriva-Compat-Mode
-# Default-Start: 2 3 4 5
-# Short-Description: Local initialization script
-# Description: This script will be executed at the end of the boot process.
-# You can put your own initialization stuff in here if you don't
-# want to do the full Sys V style init stuff.
-### END INIT INFO
-
-touch /var/lock/subsys/local
diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
deleted file mode 100755
index 46d04fe8..00000000
--- a/rc.d/rc.sysinit
+++ /dev/null
@@ -1,1191 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.d/rc.sysinit - run once at boot time
-#
-# Taken in part from Miquel van Smoorenburg's bcheckrc.
-#
-
-HOSTNAME=$(/bin/hostname)
-
-. /etc/init.d/functions
-
-set -m
-
-if [ -f /etc/sysconfig/network ]; then
- . /etc/sysconfig/network
-fi
-
-# Read in config data.
-if [ -f /etc/sysconfig/system ]; then
- . /etc/sysconfig/system
-fi
-
-if [ -r /etc/hostname ]; then
- HOSTNAME=$(cat /etc/hostname)
-fi
-
-if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
- HOSTNAME=localhost
-fi
-
-if [ ! -e /proc/mounts ]; then
- mount -n -t proc /proc /proc
- mount -n -t sysfs /sys /sys >/dev/null 2>&1
-fi
-
-PLYMOUTH=
-[ -x /bin/plymouth ] && PLYMOUTH=yes
-
-
-# Only read this once.
-cmdline=$(cat /proc/cmdline)
-
-for t in $cmdline; do
- case $t in
- -s|single|S|s) REQUESTED_RUNLEVEL="S" ;;
- [1-9]) REQUESTED_RUNLEVEL="$t" ;;
- esac
-done
-[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL="3"
-
-# killing splash when using single-user mode
-if [ "$REQUESTED_RUNLEVEL" == "S" ]; then
- [ -n "$PLYMOUTH" ] && /bin/plymouth quit 2>/dev/null
-fi
-
-uname_r=`uname -r`
-
-# Read in config data.
-if [ -f /etc/sysconfig/speedboot ]; then
- . /etc/sysconfig/speedboot
-fi
-
-if strstr "$cmdline" speedboot= ; then
- for arg in $cmdline ; do
- if [ "${arg##speedboot=}" != "${arg}" ]; then
- SPEEDBOOT=${arg##speedboot=}
- fi
- done
-fi
-
-if [ "$REQUESTED_RUNLEVEL" != 5 -o -f /etc/rc.d/rc5.d/S*network-auth -o -f /etc/crypttab ]; then
- SPEEDBOOT=no
-fi
-
-# disable speedboot if more than one profile is found (and not selected in cmdline)
-if echo /etc/netprofile/profiles/* | grep -q ' ' ; then
- if ! strstr "$cmdline" PROFILE= ; then
- SPEEDBOOT=no
- fi
-fi
-
-if strstr "$cmdline" failsafe ; then
- SPEEDBOOT=no
-fi
-
-# Check to see if systemd is used as the init system and disable speedboot as it
-# generally messes things up (manifests itself as user permission problems,
-# especially with autologins).
-if [ "$SPEEDBOOT" != "no" ]; then
- if /bin/mountpoint -q /sys/fs/cgroup/systemd; then
- SPEEDBOOT=no
- fi
-fi
-
-# Check if a possible DKMS display driver is queued to be built on this boot
-# or an interfering driver was loaded by initrd.
-if [ "$SPEEDBOOT" != "no" ] && [ -x /sbin/display_driver_helper ] && ! /sbin/display_driver_helper --check-speedboot; then
- SPEEDBOOT=no
-fi
-
-if [ "$SPEEDBOOT" = "probe" ]; then
- SPEEDBOOT_PROBE=yes
-fi
-
-if [ "x$SPEEDBOOT" = "xauto" ]; then
- STATUS=`grep -m 1 "$uname_r" /var/lib/speedboot/status 2>/dev/null`
- case "$STATUS" in
- *first\ time*) SPEEDBOOT=yes ;;
- *FAILED*) SPEEDBOOT=no ;;
- *OK*) SPEEDBOOT=yes ;;
- *STANDARD\ BOOT*) SPEEDBOOT=yes ;;
- *) SPEEDBOOT=no ;;
- esac
-fi
-
-if [ "$SPEEDBOOT" = "yes" ]; then
- export SPEEDBOOT
- PROMPT=no
-else
- unset SPEEDBOOT
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-if [ ! -d /proc/bus/usb ]; then
- modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
-else
- mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
-fi
-fi #SPEEDBOOT
-
-if [ -f /.readahead_collect -a -r /etc/sysconfig/readahead ]; then
- . /etc/sysconfig/readahead
- if [ "x$READAHEAD_COLLECT" == "xyes" -a ! -f /forcefsck -a -x /sbin/readahead-collector ]; then
- /sbin/readahead-collector
- fi
-elif [ -x /sbin/readahead_early ]; then
- /sbin/readahead_early > /dev/null 2>&1
-fi
-
-if [ -x /etc/rc.early.local ]; then
- . /etc/rc.early.local
-fi
-
-# Unmount the initrd, if necessary
-# (pixel) do not unmount if /initrd/loopfs is mounted (happens for root loopback)
-# (bluca) handle udev /dev tmpfs here since kernel will happily umount /dev after initrd end
-# (blino) do it before the udev service is started so that it uses the /dev tmpfs from initrd
-if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then
- if LC_ALL=C grep -q /initrd/dev /proc/mounts; then
- mount --move /initrd/dev /dev
- fi
- action "Unmounting initrd: " umount -l /initrd
- /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
-fi
-
-if [ "x$SPEEDBOOT" = "xyes" ]; then
- /sbin/start_udev
- udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x0c03*"
- udevadm trigger --action=add --subsystem-match=block
- udevadm settle &
- UDEV_DISK_PID=$!
- udevadm trigger --action=add --subsystem-match=mem --subsystem-match=input --subsystem-match=tty --subsystem-match=acpi --subsystem-match=rtc --subsystem-match=hid
- udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x060000*"
- udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x03*"
- udevadm settle &
- UDEV_PID=$!
-fi
-
-PLYMOUTH=
-[ -x /bin/plymouth ] && PLYMOUTH=yes
-
-# Check SELinux status
-SELINUX_STATE=
-if [ -e "/sys/fs/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
- if [ -r "/sys/fs/selinux/enforce" ] ; then
- SELINUX_STATE=$(cat "/sys/fs/selinux/enforce")
- else
- # assume enforcing if you can't read it
- SELINUX_STATE=1
- fi
-fi
-
-if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then
- /sbin/restorecon -R /dev 2>/dev/null
-fi
-
-disable_selinux() {
- gprintf "*** Warning -- SELinux is active\n"
- gprintf "*** Disabling security enforcement for system recovery.\n"
- gprintf "*** Run 'setenforce 1' to reenable.\n"
- echo "0" > "/sys/fs/selinux/enforce"
-}
-
-relabel_selinux() {
- # if /sbin/init is not labeled correctly this process is running in the
- # wrong context, so a reboot will be required after relabel
- AUTORELABEL=
- . /etc/selinux/config
- echo "0" > /sys/fs/selinux/enforce
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
- if [ "$AUTORELABEL" = "0" ]; then
- echo
- gprintf "*** Warning -- SELinux %s policy relabel is required. \n" ${SELINUXTYPE}
- gprintf "*** /etc/selinux/config indicates you want to manually fix labeling\n"
- gprintf "*** problems. Dropping you to a shell; the system will reboot\n"
- gprintf "*** when you leave the shell.\n"
- sulogin
-
- else
- echo
- gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE}
- gprintf "*** Relabeling could take a very long time, depending on file\n"
- gprintf "*** system size and speed of hard drives.\n"
-
- /sbin/fixfiles -F restore > /dev/null 2>&1
- fi
- rm -f /.autorelabel
- gprintf "Unmounting file systems\n"
- umount -a
- mount -n -o remount,ro /
- gprintf "Automatic reboot in progress.\n"
- reboot -f
-}
-
-# Print a text banner.
-# C-like escape sequences don't work as 2nd and up parameters of gprintf,
-# so real escap chars were written
-PRODUCT=`sed "s/.*release \([0-9.]*\).*/\1/g" /etc/release 2> /dev/null`
-SYSTEM=${SYSTEM="Mageia"}
-
-if [ -r /etc/sysconfig/oem ]; then
- . /etc/sysconfig/oem
-fi
-
-if [ "$BOOTUP" != "serial" ]; then
- gprintf "\t\t\tWelcome to %s" "`echo -en '\\033[1;36m'`$SYSTEM`echo -en '\\033[0;39m'` $PRODUCT"
-else
- gprintf "\t\t\tWelcome to %s" "$SYSTEM $PRODUCT"
-fi
-echo -en "\r"
-echo
-if [ "$PROMPT" != "no" ]; then
- gprintf "\t\tPress 'I' to enter interactive startup."
- echo
-fi
-
-# Fix console loglevel
-if [ -n "$LOGLEVEL" ]; then
- /bin/dmesg -n $LOGLEVEL
-fi
-
-initsplash 5
-rc_splash start 1
-
-# Initialize hardware
-if [ -f /proc/sys/kernel/modprobe ]; then
- if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
- sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
- else
- # We used to set this to NULL, but that causes 'failed to exec' messages"
- sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
- fi
-fi
-
-touch /dev/.in_sysinit >/dev/null 2>&1
-
-# Set default affinity
-if [ -x /bin/taskset ]; then
- if strstr "$cmdline" default_affinity= ; then
- for arg in $cmdline ; do
- if [ "${arg##default_affinity=}" != "${arg}" ]; then
- /bin/taskset -p ${arg##default_affinity=} 1
- fi
- done
- fi
-fi
-
-nashpid=$(pidof nash 2>/dev/null)
-[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
-unset nashpid
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-action $"Starting udev: " /sbin/udevd --daemon
-/sbin/udevadm trigger --type=subsystems --action=add
-/sbin/udevadm trigger --type=devices --action=add
-/sbin/udevadm settle
-fi #SPEEDBOOT
-
-# Load other user-defined modules
-for file in /etc/sysconfig/modules/*.modules ; do
- [ -x $file ] && $file
-done
-
-# Load modules (for backward compatibility with VARs)
-if [ -f /etc/rc.modules ]; then
- if [ "x$SPEEDBOOT" != "xyes" ]; then
- /etc/rc.modules
- else
- ionice -c 3 /etc/rc.modules &
- MODULES_PID=$!
- fi
-fi
-
-mount -n -t devpts -o mode=620 none /dev/pts >/dev/null 2>&1
-[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
-
-mount -n -t tmpfs none /dev/shm >/dev/null 2>&1
-
-# Configure kernel parameters
-update_boot_stage RCkernelparam
-apply_sysctl
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-
-# If brltty exist start it (after udev so that vcsa device nodes are created)
-[ -x /bin/brltty -a "$BRLTTY" != "no" ] && action "Starting braille terminal" /bin/brltty && SPEEDBOOT="DISABLED reason: braille"
-
-fi #SPEEDBOOT
-
-# Set the hostname.
-update_boot_stage RChostname
-action "Setting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
-
-# Set the NIS domain name
-if [ -n "$NISDOMAIN" ]; then
- action "Setting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-# Now that we load only one scsi_hostadapter in the initrd, we
-# need to load the others here
-modprobe scsi_hostadapter >/dev/null 2>&1
-# Now that we use modular IDE, we need to do the same for IDE controllers
-modprobe ide-controller >/dev/null 2>&1
-# Sync waiting for storage.
-{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
-
-# Start any MD RAID arrays that haven't been started yet
-if [ -f /etc/mdadm.conf -a -x /sbin/mdadm ]; then
- MDADM_RETURN=`/sbin/mdadm -As --auto=yes --run 2>&1`
- RETVAL=$?
- if [ $RETVAL -gt 0 ]; then
- echo $MDADM_RETURN | grep -q 'No arrays found in config file'
- RETVAL=$?
- # only enable speedboot if no array is configured
- if [ $RETVAL -gt 0 ]; then
- SPEEDBOOT="DISABLED: reason:MD RAID"
- fi
- else # MD RAID arrays detected, better to disable speedboot
- SPEEDBOOT="DISABLED: reason:MD RAID"
-
- fi
-fi
-fi #SPEEDBOOT
-
-# Device mapper & related initialization
-if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
- modprobe dm-mod >/dev/null 2>&1
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-if [ -f /etc/crypttab ]; then
- init_crypto 0
-fi
-
-if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \
- [ -x /sbin/multipath ]; then
- modprobe dm-multipath > /dev/null 2>&1
- /sbin/multipath -v 0
- if [ -x /sbin/kpartx ]; then
- /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null
- fi
-fi
-
-if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
- modprobe dm-mirror >/dev/null 2>&1
- dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
- if [ "$dmraidsets" != "no raid disks" -a "$dmraidsets" != "no block devices found" ]; then
- for dmname in $dmraidsets; do
- if [[ "$dmname" =~ '^isw_.*' ]] && \
- ! strstr "$cmdline" noiswmd; then
- continue
- fi
-
- /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
- /sbin/kpartx -a -p p "/dev/mapper/$dmname"
- SPEEDBOOT="DISABLED reason:dmraid"
- done
- fi
- fi
-fi #SPEEDBOOT
-
-# Start any MD RAID arrays that haven't been started yet
-[ -r /proc/mdstat ] && [ -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
-
-if [ -x /sbin/lvm ]; then
- action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --ignorelockingfailure
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-if [ -f /etc/crypttab ]; then
- init_crypto 0
-fi
-fi #SPEEDBOOT
-
-if strstr "$cmdline" fastboot || [ -f /fastboot ]; then
- fastboot=yes
-fi
-
-if [ -f /fsckoptions ]; then
- fsckoptions=$(cat /fsckoptions)
-fi
-
-# (blino) always source autofsck settings, for AUTOFSCK_CRYPTO_TIMEOUT (#16029)
-[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
-
-if strstr "$cmdline" forcefsck || [ -f /forcefsck ]; then
- fsckoptions="-f $fsckoptions"
-elif [ -f /.autofsck ]; then
- if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
- AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
- fi
- if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
- rc_splash verbose
- echo
- gprintf "*** Warning -- the system did not shut down cleanly. \n"
- gprintf "*** Dropping you to a shell; the system will continue\n"
- gprintf "*** when you leave the shell.\n"
- [ -n "$SELINUX_STATE" ] && echo "0" > /sys/fs/selinux/enforce
- sulogin
- [ -n "$SELINUX_STATE" ] && echo "1" > /sys/fs/selinux/enforce
- [ -n "$PLYMOUTH" ] && plymouth --show-splash
- fi
- fsckoptions="$AUTOFSCK_OPT $fsckoptions"
-fi
-
-if [ "$BOOTUP" = "color" ]; then
- fsckoptions="-C $fsckoptions"
-else
- fsckoptions="-V $fsckoptions"
-fi
-
-READONLY=
-if [ -f /etc/sysconfig/readonly-root ]; then
- . /etc/sysconfig/readonly-root
-fi
-if strstr "$cmdline" readonlyroot ; then
- READONLY=yes
- [ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
- [ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state
-fi
-if strstr "$cmdline" noreadonlyroot ; then
- READONLY=no
-fi
-
-if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
-
- mount_empty() {
- if [ -e "$1" ]; then
- echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- mount_dirs() {
- if [ -e "$1" ]; then
- mkdir -p "$RW_MOUNT$1"
- find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- mount_files() {
- if [ -e "$1" ]; then
- cp -a --parents "$1" "$RW_MOUNT"
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- # Common mount options for scratch space regardless of
- # type of backing store
- mountopts=
-
- # Scan partitions for local scratch storage
- rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
-
- # First try to mount scratch storage from /etc/fstab, then any
- # partition with the proper label. If either succeeds, be sure
- # to wipe the scratch storage clean. If both fail, then mount
- # scratch storage via tmpfs.
- if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
- rm -rf "$RW_MOUNT" > /dev/null 2>&1
- elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then
- rm -rf "$RW_MOUNT" > /dev/null 2>&1
- else
- mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT"
- fi
-
- for file in /etc/rwtab /etc/rwtab.d/* /dev/.initramfs/rwtab ; do
- is_ignored_file "$file" && continue
- [ -f $file ] && cat $file | while read type path ; do
- case "$type" in
- empty)
- mount_empty $path
- ;;
- files)
- mount_files $path
- ;;
- dirs)
- mount_dirs $path
- ;;
- *)
- ;;
- esac
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- done
-
- # Use any state passed by initramfs
- [ -d /dev/.initramfs/state ] && cp -a /dev/.initramfs/state/* $RW_MOUNT
-
- # In theory there should be no more than one network interface active
- # this early in the boot process -- the one we're booting from.
- # Use the network address to set the hostname of the client. This
- # must be done even if we have local storage.
- ipaddr=
- if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
- ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }')
- for ip in $ipaddr ; do
- HOSTNAME=
- eval $(ipcalc -h $ip 2>/dev/null)
- [ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; }
- done
- fi
-
- # Clients with read-only root filesystems may be provided with a
- # place where they can place minimal amounts of persistent
- # state. SSH keys or puppet certificates for example.
- #
- # Ideally we'll use puppet to manage the state directory and to
- # create the bind mounts. However, until that's all ready this
- # is sufficient to build a working system.
-
- # First try to mount persistent data from /etc/fstab, then any
- # partition with the proper label, then fallback to NFS
- state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
- if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
- /bin/true
- elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1; then
- /bin/true
- elif [ ! -z "$CLIENTSTATE" ]; then
- # No local storage was found. Make a final attempt to find
- # state on an NFS server.
-
- mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
- fi
-
- if [ -w "$STATE_MOUNT" ]; then
-
- mount_state() {
- if [ -e "$1" ]; then
- [ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT"
- mount -n --bind "$STATE_MOUNT$1" "$1"
- fi
- }
-
- for file in /etc/statetab /etc/statetab.d/* ; do
- is_ignored_file "$file" && continue
- [ ! -f "$file" ] && continue
-
- if [ -f "$STATE_MOUNT/$file" ] ; then
- mount -n --bind "$STATE_MOUNT/$file" "$file"
- fi
-
- for path in $(grep -v "^#" "$file" 2>/dev/null); do
- mount_state "$path"
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- done
-
- if [ -f "$STATE_MOUNT/files" ] ; then
- for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do
- mount_state "$path"
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- fi
- fi
-fi
-
-if [[ " $fsckoptions" != *" -y"* ]]; then
- fsckoptions="-a $fsckoptions"
-fi
-
-_RUN_QUOTACHECK=0
-if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
- _RUN_QUOTACHECK=1
-fi
-Fsck()
-{
- fsck $*
- rc=$?
-
- if [ "$rc" -eq "0" ]; then
- echo_success
- echo
- elif [ "$rc" -eq "1" ]; then
- echo_passed
- echo
- _RUN_QUOTACHECK=1
- elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
- gprintf "Unmounting file systems\n"
- umount -a
- mount -n -o remount,ro /
- gprintf "Automatic reboot in progress.\n"
- reboot -f
- elif [ $((rc & 4)) = 4 ]; then
- # Return code is a or between return codes for the filesystems
- # 4 means that a filesystem remains corrupted
- rc_splash verbose
- echo_failure
- echo
- echo
- gprintf "*** An error occurred during the file system check.\n"
- gprintf "*** Dropping you to a shell; the system will reboot\n"
- gprintf "*** when you leave the shell.\n"
-
- str=`gprintf "(Repair filesystem)"`
- PS1="$str \# # "; export PS1
- [ "$SELINUX_STATE" = "1" ] && disable_selinux
- sulogin
-
- gprintf "Unmounting file systems\n"
- umount -a
- mount -n -o remount,ro /
- gprintf "Automatic reboot in progress.\n"
- reboot -f
- else
- echo_failure
- echo
- gprintf "*** A non fatal error occurred during the file system check.\n"
- fi
-}
-
-remount_needed() {
- local state oldifs
- [ "$READONLY" = "yes" ] && return 1
- state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts)
- oldifs=$IFS
- IFS=","
- for opt in $state ; do
- if [ "$opt" = "rw" ]; then
- IFS=$oldifs
- return 1
- fi
- done
- IFS=$oldifs
- return 0
-}
-
-if [ "x$SPEEDBOOT" = "xyes" ]; then
- wait $UDEV_DISK_PID
-fi
-# do not check / if already rw (for example with unionfs)
-if [ -z "$fastboot" -a "$READONLY" != "yes" ] && remount_needed; then
- gprintf "Checking root filesystem\n"
- Fsck -T -a $fsckoptions /
-fi
-_RUN_QUOTACHECK=0
-
-# Remount the root filesystem read-write.
-update_boot_stage RCmountfs
-if remount_needed ; then
- action "Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
-fi
-
-# wait for usb storage scanning processes to finish
-if ! strstr "$cmdline" nousb; then
- LC_ALL=C grep '08' /sys/bus/usb/devices/*/bInterfaceClass >/dev/null 2>&1
- RETVAL=$?
- if [ $RETVAL -eq 0 ]; then
- countdown=20
- until [ -d /sys/module/usb_storage -o $countdown -eq 0 ]; do
- usleep 100000; let countdown=$countdown-1;
- done
- while ps -eocomm | grep -q usb-stor-scan; do
- sleep 1;
- done
- fi
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-# Clean up SELinux labels
-if [ -n "$SELINUX_STATE" ]; then
- restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
- SPEEDBOOT="DISABLED reason: SELinux"
-fi
-
-[ -x /sbin/hibernate-cleanup.sh ] && /sbin/hibernate-cleanup.sh start
-
-# If relabeling, relabel mount points.
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
- if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
- restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
- fi
-fi
-fi
-
-if [ "$READONLY" != "yes" ] ; then
- # Clear mtab
- (> /etc/mtab) &> /dev/null
-
- # Remove stale backups
- rm -f /etc/mtab~ /etc/mtab~~
-
- # Enter mounted filesystems into /etc/mtab
- mount -f /
- mount -f /proc >/dev/null 2>&1
- mount -f /sys >/dev/null 2>&1
- mount -f /dev/pts >/dev/null 2>&1
- mount -f /dev/shm >/dev/null 2>&1
- mount -f /proc/bus/usb >/dev/null 2>&1
-fi
-# (pixel) also added /initrd/loopfs for loopback root
-mount -f /initrd/loopfs 2>/dev/null
-
-if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then
- # check for arguments passed from kernel
- if ! strstr "$cmdline" nopnp ; then
- PNP=yes
- fi
- if [ -n "$PNP" ]; then
- action "Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf
- else
- action "Skipping ISA PNP configuration at users request: " /bin/true
- fi
-fi
-
-# tweak isapnp settings if needed.
-if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then
- /sbin/sndconfig --mungepnp >/dev/null 2>&1
-fi
-
-# Check filesystems
-# (pixel) do not check loopback files, will be done later (aren't available yet)
-if [ -z "$fastboot" ]; then
- gprintf "Checking filesystems\n"
- Fsck -T -R -A -a -t noopts=loop $fsckoptions
-fi
-
-# Mount all other filesystems (except for network bases filesystems and /proc, which is already
-# mounted). Contrary to standard usage,
-# filesystems are NOT unmounted in single user mode.
-# (pixel) also do not mount loopback and encrypted filesystems
-# will be done later
-(
-# export locales (needed by mount.ntfs-3g)
-export LC_ALL
-export LANG
-# The 'no' applies to all listed filesystem types. See mount(8).
-if [ "$READONLY" != "yes" ] ; then
- action "Mounting local filesystems: " mount -a -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
-else
- action "Mounting local filesystems: " mount -a -n -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
-fi
-)
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-[[ -z $AUTOFSCK_CRYPTO_TIMEOUT ]] && AUTOFSCK_CRYPTO_TIMEOUT=15
-
-#Mounting Encrypted filesystem
-encrypted_swap=
-if [[ ! -f /fastboot ]];then
- encrypted=
- while read -a entry;do
- device=${entry[0]}
- mountpoint=${entry[1]}
- options=${entry[3]}
- type=${entry[2]}
- if [[ $options == *encryption=* || $options == *encrypted* ]];then
- [[ $options == *noauto* ]] && continue
- if [[ $type == *swap* ]];then
- encrypted_swap="$encrypted_swap $device"
- continue
- fi
- encrypted="$encrypted $mountpoint"
- fi
- done < /etc/fstab
- if [[ -n $encrypted ]];then
- modprobe cryptoloop
- rc_splash verbose
- echo "We have discovered Encrypted filesystems, do you want to mount them now ?"
- MSG=`gprintf "Press Y within %%d seconds to mount your encrypted filesystems..."`
- KEYS=`gprintf "yY"`
- if /sbin/getkey -c $AUTOFSCK_CRYPTO_TIMEOUT -m "$MSG" "$KEYS"; then
- echo -e '\n'
- for i in ${encrypted};do
- echo -n "${i} "; mount ${i}
- done
- else
- echo -e '\n'
- fi
- fi
-fi
-
-# (pixel) Check loopback filesystems
-if [ ! -f /fastboot ]; then
- modprobe loop
- gprintf "Checking loopback filesystems"
- Fsck -T -R -A -a -t opts=loop $fsckoptions
-fi
-
-fi #SPEEDBOOT
-
-# Mount loopback
-action "Mounting loopback filesystems: " mount -a -O loop
-
-# Update quotas if necessary
-if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
- action "Checking local filesystem quotas: " /sbin/quotacheck -anug
-fi
-
-if [ -x /sbin/quotaon ]; then
- action "Turning on user and group quotas for local filesystems: " /sbin/quotaon -aug
-fi
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-# Check to see if a full relabel is needed
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
- if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
- relabel_selinux
- fi
-else
- if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then
- [ -f /.autorelabel ] || touch /.autorelabel
- fi
-fi
-fi #SPEEDBOOT
-
-# Initialize pseudo-random number generator
-if [ -f "/var/lib/random-seed" ]; then
- cat /var/lib/random-seed > /dev/urandom
-else
- [ "$READONLY" != "yes" ] && touch /var/lib/random-seed
-fi
-if [ "$READONLY" != "yes" ]; then
- chmod 600 /var/lib/random-seed
- dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-fi
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-if [ -f /etc/crypttab ]; then
- init_crypto 1
- SPEEDBOOT="DISABLED reason: crypto FS"
-fi
-
-# Configure machine if necessary.
-if [ -f /.unconfigured ]; then
-
- if [ -x /bin/plymouth ]; then
- /bin/plymouth quit
- fi
-
- if [ -x /usr/bin/system-config-keyboard ]; then
- /usr/bin/system-config-keyboard
- fi
- if [ -x /usr/bin/passwd ]; then
- /usr/bin/passwd root
- fi
- if [ -x /usr/sbin/system-config-network-tui ]; then
- /usr/sbin/system-config-network-tui
- fi
- if [ -x /usr/sbin/timeconfig ]; then
- /usr/sbin/timeconfig
- fi
- if [ -x /usr/sbin/authconfig-tui ]; then
- /usr/sbin/authconfig-tui --nostart
- fi
- if [ -x /usr/sbin/ntsysv ]; then
- /usr/sbin/ntsysv --level 35
- fi
-
- # Reread in network configuration data.
- if [ -f /etc/sysconfig/network ]; then
- . /etc/sysconfig/network
-
- # Reset the hostname.
- action "Resetting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
-
- # Reset the NIS domain name.
- if [ -n "$NISDOMAIN" ]; then
- action "Resetting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
- fi
- fi
-
- rm -f /.unconfigured
-fi
-fi
-
-# Clean out /.
-rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
- /poweroff /.suspended /etc/killpower &> /dev/null
-
-# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
-_NEED_XFILES=
-[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1
-
-# Clean up /var.
-rm -rf /var/lock/cvs/* /var/run/screen/*
-find /var/lock /var/run ! -type d ! -path '/var/lock/TMP_1ST' -exec rm -f {} \;
-
-if [ "x$SPEEDBOOT" = "xyes" ]; then
- wait $MODULES_PID
- wait $UDEV_PID
- /etc/rc.d/rc S &
- RC_PID=$!
-fi
-{
-# Clean up utmp/wtmp
-> /var/run/utmp
-touch /var/log/wtmp /var/log/btmp
-chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp
-chmod 0664 /var/run/utmp /var/log/wtmp
-chmod 0600 /var/log/btmp
-if [ -n "$_NEED_XFILES" ]; then
- > /var/run/utmpx
- touch /var/log/wtmpx
- chgrp utmp /var/run/utmpx /var/log/wtmpx
- chmod 0664 /var/run/utmpx /var/log/wtmpx
-fi
-[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* /var/log/btmp >/dev/null 2>&1
-
-# Clean up various /tmp bits
-[ -n "$SELINUX_STATE" ] && restorecon /tmp
-rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.s.PGSQL.*
-rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
- /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
- /tmp/ssh-* /tmp/.fam_socket /tmp/.esd /tmp/.esd-* \
- /tmp/pulse-* /tmp/.sawfish-* /tmp/esrv* /tmp/kio* \
- /var/lib/gdm/core.*
-
-# Make ICE directory
-mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
-chown root:root /tmp/.ICE-unix
-[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
-
-# Start up swapping.
-update_boot_stage RCswap
-action "Enabling /etc/fstab swaps: " swapon -a -e 2>/dev/null
-if [ "$AUTOSWAP" = "yes" ]; then
- curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
- swappartitions=$(blkid -t TYPE=swap -o device)
- if [ x"$swappartitions" != x ]; then
- for partition in $swappartitions ; do
- [ ! -e $partition ] && continue
- majmin=$(get_numeric_dev dec $partition)
- echo $curswap | grep -qw "$majmin" || action "Enabling local swap partitions: " swapon $partition
- done
- fi
-fi
-
-# Set up binfmt_misc
-/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
-
-# Boot time profiles. Yes, this should be somewhere else.
-if strstr "$cmdline" netprofile= && [ -x /usr/sbin/system-config-network-cmd ]; then
- for arg in $cmdline ; do
- if [ "${arg##netprofile=}" != "${arg}" ]; then
- /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
- fi
- done
-fi
-
-(
-# Now turn on swap in case we swap to files.
-action "Enabling swap space: " swapon -a -e
-
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-# If a SCSI tape has been detected, load the st module unconditionally
-# since many SCSI tapes don't deal well with st being loaded and unloaded
-if [ -n "$USEMODULES" -a -f /proc/scsi/scsi ] && LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
- LC_ALL=C fgrep -q ' 9 st' /proc/devices || modprobe st >/dev/null 2>&1
- SPEEDBOOT="DISABLED reason: SCSI tape"
-fi
-fi #SPEEDBOOT
-
-(
-# Turn on harddisk optimization
-# There is only one file /etc/sysconfig/harddisks for all disks
-# after installing the hdparm-RPM. If you need different hdparm parameters
-# for each of your disks, copy /etc/sysconfig/harddisks to
-# /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it.
-# Each disk which has no special parameters will use the defaults.
-# Each non-disk which has no special parameters will be ignored.
-#
-
-disk[0]=s;
-disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd;
-disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh;
-disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl;
-disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp;
-disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt;
-disk[21]=sda; disk[22]=sdb; disk[23]=sdc; disk[24]=sdd;
-disk[25]=sde; disk[26]=sdf; disk[27]=sdg; disk[28]=sdh;
-disk[29]=sr0; disk[30]=sr1; disk[31]=sr2; disk[32]=sr3;
-disk[33]=scd0; disk[34]=scd1; disk[35]=scd2; disk[36]=scd3;
-disk[37]=sg0; disk[38]=sg1; disk[39]=sg2; disk[40]=sg3;
-
-
-# Skip hard disks optimization if software RAID arrays are currently
-# resyncing and disks heavily active, because hdparm might hang and
-# lock system startup in such situation
-
-if [ ! -f /proc/mdstat ] || ! /bin/egrep -qi "re(cover|sync)|syncing" /proc/mdstat; then
- if [ -x /sbin/hdparm ]; then
- for device in {0..40}; do
- unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS
- if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then
- . /etc/sysconfig/harddisk${disk[$device]}
- HDFLAGS[$device]=
- if [ -n "$MULTIPLE_IO" ]; then
- HDFLAGS[$device]="-q -m$MULTIPLE_IO"
- fi
- if [ -n "$USE_DMA" ]; then
- HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA"
- fi
- if [ -n "$EIDE_32BIT" ]; then
- HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT"
- fi
- if [ -n "$LOOKAHEAD" ]; then
- HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD"
- fi
- if [ -n "$EXTRA_PARAMS" ]; then
- HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS"
- fi
- else
- HDFLAGS[$device]="${HDFLAGS[0]}"
- fi
- if [ -e "/proc/ide/${disk[$device]}/media" -o -e "/sys/block/${disk[$device]}/device/vendor" ]; then
- if [ -e "/proc/ide/${disk[$device]}/media" ]; then
- hdmedia=`cat /proc/ide/${disk[$device]}/media`
- else
- hdmedia=`cat /sys/block/${disk[$device]}/device/vendor`
- fi
- if [ "$hdmedia" = "disk" -o "$vendor" = "ATA" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then
- if [ -n "${HDFLAGS[$device]}" ]; then
- sleep 2
- action "Setting hard drive parameters for %s: " ${disk[$device]} /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]}
- fi
- fi
- fi
- done
- fi
-else
- action "RAID Arrays are resyncing. Skipping hard drive parameters section." /bin/true
-fi
-) &
-
-
-# Adjust symlinks as necessary in /boot to keep system services from
-# spewing messages about mismatched System maps and so on.
-if [ -L /boot/System.map -a -r /boot/System.map-$uname_r -a \
- ! /boot/System.map -ef /boot/System.map-$uname_r ] ; then
- ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
-fi
-if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
- ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
-fi
-
-# Adjust symlinks as necessary in /boot to have the default config
-if [ -L /boot/config -a -r /boot/config-$uname_r ] ; then
- ln -sf config-$uname_r /boot/config 2>/dev/null
-fi
-if [ ! -e /boot/config -a -r /boot/config-$uname_r ] ; then
- ln -sf config-$uname_r /boot/config 2>/dev/null
-fi
-
-# Now that we have all of our basic modules loaded and the kernel going,
-# let's dump the syslog ring somewhere so we can find it later
-[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
-dmesg -s 131072 > /var/log/dmesg
-) &
-
-# create the crash indicator flag to warn on crashes, offer fsck with timeout
-touch /.autofsck &> /dev/null
-
-if [ "$PROMPT" != no ]; then
- while :; do
- pid=$(/sbin/pidof getkey)
- [ -n "$pid" -o -e /var/run/getkey_done ] && break
- usleep 100000
- done
- [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
-fi
-} &
-if strstr "$cmdline" confirm ; then
- touch /var/run/confirm
-fi
-if [ "x$SPEEDBOOT" != "xyes" ]; then
-if [ "$PROMPT" != "no" ]; then
- /sbin/getkey i && touch /var/run/confirm
- touch /var/run/getkey_done
-fi
-wait
-[ "$PROMPT" != no ] && rm -f /var/run/getkey_done
-fi
-
-if strstr "$cmdline" failsafe; then
- touch /var/run/failsafe
-fi
-
-if [ -f /var/lock/TMP_1ST ];then
- if [ -f /etc/init.d/mandrake_firstime ];then
- /bin/sh /etc/init.d/mandrake_firstime
- fi
-fi
-
-if [ "x$SPEEDBOOT" = "xyes" ]; then
- if [ ! -f /.readahead_collect -a -x /sbin/readahead_later ]; then
- /sbin/readahead_later > /dev/null 2>&1
- fi
- wait $RC_PID
- countdown=10
- until [ -e /tmp/.X11-unix/X0 -o $countdown -eq 0 ]; do
- sleep 1; let countdown=$countdown-1;
- done
-
-
-
- /sbin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=block --subsystem-nomatch=mem --subsystem-nomatch=input --subsystem-nomatch=acpi --subsystem-nomatch=rtc --subsystem-nomatch=hid
- /sbin/udevadm settle --timeout=5 > /dev/null 2>&1
- /sbin/udevadm control --env=STARTUP=
- mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
-
- # (anssi) at this point plymouth should have quit, reopen descriptors to
- # ensure that the output of the rest of this script is seen if the user is
- # not in X11
- exec 0<>/proc/self/fd/0 1<>/proc/self/fd/1 2<>/proc/self/fd/2
-fi
-
-if [ -f /etc/init.d/mandrake_everytime ]; then
- /bin/sh /etc/init.d/mandrake_everytime
-fi
-
-if [ "x$SPEEDBOOT_PROBE" = "xyes" ]; then
- sed -i -e "/$uname_r .*/d" /var/lib/speedboot/status 2>/dev/null
- unset SPEEDBOOT_PROBE
-fi
-
-if [ "x$SPEEDBOOT" = "xyes" -a ! -e /tmp/.X11-unix/X0 ]; then
- /etc/init.d/dm stop
- grep -q "$uname_r" /var/lib/speedboot/status 2> /dev/null
- RETVAL=$?
- if [ $RETVAL -eq 0 ]; then
- sed -i -e "s/^$uname_r FAILED (first time)/$uname_r FAILED/g" -e "/FAILED/!s/^$uname_r .*/$uname_r FAILED (first time)/g" /var/lib/speedboot/status
- else
- echo "$uname_r FAILED (first time)" >> /var/lib/speedboot/status
- fi
-fi
-
-# system configuration doesn't permit speedboot or speedboot failed, disable it
-if strstr "$SPEEDBOOT" DISABLED ; then
- grep -q $uname_r /var/lib/speedboot/status 2> /dev/null
- RETVAL=$?
- if [ $RETVAL -eq 0 ]; then
- sed -i -e "s/^$uname_r .*/$uname_r $SPEEDBOOT/g" /var/lib/speedboot/status
- else
- echo "$uname_r $SPEEDBOOT" >> /var/lib/speedboot/status
- fi
-fi
-
-unset SPEEDBOOT
-
-# (pixel) a kind of profile for XF86Config
-# if no XFree=XXX given on kernel command-line, restore XF86Config.standard
-for i in XF86Config XF86Config-4; do
- if [ -L "/etc/X11/$i" ]; then
- XFree=`sed -n 's/.*XFree=\(\w*\).*/\1/p' /proc/cmdline`
- [ -n "$XFree" ] || XFree=standard
- [ -r "/etc/X11/$i.$XFree" ] && ln -sf "$i.$XFree" "/etc/X11/$i"
- fi
-done
-
-# Let rhgb know that we're leaving rc.sysinit
-if [ -x /bin/plymouth ]; then
- /bin/plymouth --sysinit
-fi
-
-# remove this file at the very end, for speedboot
-rm -f /dev/.in_sysinit
-
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-22 00:05:40 +0000