aboutsummaryrefslogtreecommitdiffstats
path: root/ppp/ip-up.ipv6to4
diff options
context:
space:
mode:
Diffstat (limited to 'ppp/ip-up.ipv6to4')
-rw-r--r--ppp/ip-up.ipv6to4160
1 files changed, 160 insertions, 0 deletions
diff --git a/ppp/ip-up.ipv6to4 b/ppp/ip-up.ipv6to4
new file mode 100644
index 00000000..6767703c
--- /dev/null
+++ b/ppp/ip-up.ipv6to4
@@ -0,0 +1,160 @@
+#!/bin/bash
+#
+# ip-up.ipv6to4
+#
+#
+# Taken from:
+# (P) & (C) 2000-2001 by Peter Bieringer <pb@bieringer.de>
+#
+# Version 2001-05-07
+#
+# Calling parameters:
+# $1: interface name
+#
+# Called by (mostly) /etc/ppp/ip-up.local
+# like: /etc/ppp/ip-up.ipv6to4 $1 >>/var/log/ppp-ipv6to4.log 2>&1
+#
+# Uses following information from /etc/sysconfig/network:
+# NETWORKING_IPV6=yes|no: controls IPv6 initialization (global setting)
+#
+# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
+# IPV6TO4INIT=yes|no: controls configuration
+# IPV6TO4_IPV4ADDR=IPv4addr: special local address for 6to4 tunneling (only needed behind a NAT gateway)
+# IPV6TO4_RELAY=IPv4addr: remote IPv6to4 relay address
+# IPV6TO4_ROUTING="eth0-:f101::0/64 eth1-:f102::0/64": information to setup local subnetting
+# IPV6TO4_CONTROL_RADVD=yes|no: controls radvd triggering
+# IPV6TO4_RADVD_PIDFILE=file: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid"
+#
+# Requirements
+# radvd-0.6.2p3 or newer supporting option "Base6to4Interface"
+#
+
+
+if [ -z "$1" ]; then
+ echo $"Option 1 is empty but should contain interface name - skip IPv6to4 initialization" >/dev/stderr
+ exit 1
+fi
+
+# Get global network configuration
+. /etc/sysconfig/network
+
+# Source IPv4 helper functions
+cd /etc/sysconfig/network-scripts
+. network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+# Test if IPv6 is globally enabled
+if [ ! "${NETWORKING_IPV6}" = "yes" ]; then
+ # Global IPv6 switch not enabled, end now
+ exit 0
+fi
+
+if [ ! -f /etc/sysconfig/network-scripts/network-functions-ipv6 ]; then
+ # IPv6 setup isn't well
+ exit 1
+fi
+
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+# Run basic IPv6 test (and make sure the ipv6 module will be loaded), if not ok, skip IPv6 initialization
+test_ipv6 || exit 1
+
+
+# Setup of 6to4, if configured
+valid6to4config="yes"
+if [ "$IPV6TO4INIT" = "yes" ]; then
+ if [ ! -z "$IPV6TO4_IPV4ADDR" ]; then
+ # Take special configured from config file (precedence 1)
+ ipv4addr="$IPV6TO4_IPV4ADDR"
+ else
+ # Get IPv4 address from interface first (has precedence 2)
+ ipv4addr="`LC_ALL=C ifconfig $DEVICE |grep "inet addr:" | tr : " " | awk '{ print $3 }'`"
+ if [ -z "$ipv4addr" ]; then
+ # Take configured from config file (precedence 3)
+ ipv4addr="$IPADDR"
+ fi
+ fi
+ if [ ! -z "$ipv4addr" ]; then
+ # Test for non-global IPv4 address
+ if ! testipv4_globalusable $ipv4addr; then
+ echo $"Given IPv4 address $ipv4addr is not a globally usable one, 6to4 configuration is not valid!"
+ valid6to4config="no"
+ fi
+ if [ -z "$IPV6TO4_RELAY" ]; then
+ echo $"IPv6to4 configuration needs an IPv6to4 relay address, 6to4 configuration is not valid!"
+ valid6to4config="no"
+ fi
+ else
+ echo $"IPv6to4 configuration needs an IPv4 address on related interface or extra specified, 6to4 configuration is not valid!"
+ valid6to4config="no"
+ fi
+ if [ "$valid6to4config" = "yes" ]; then
+ # Beep
+ if [ -x /usr/bin/beep ]; then /usr/bin/beep -f 2000; else echo -en "\a" >/dev/console; fi
+
+ # Cleanup all old data (needed, if "ip-down.ipv6to4" wasn't executed)
+
+ # Delete all static IPv6to4 routes to relay
+ ifdown_ipv6_route_all sit0 ::$IPV6TO4_RELAY
+
+ # Delete routes to local networks
+ for devsuf in $IPV6TO4_ROUTING; do
+ dev="`echo $devsuf | awk -F- '{ print $1 }'`"
+ ifdown_ipv6_route_all $dev ::
+ done
+
+ # Delete all configured 6to4 address
+ ifdown_ipv6to4_all sit0
+
+ # Setup new data
+ ifup_ipv6to4 $DEVICE $ipv4addr || exit 1
+
+ if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+ grep "^sit0" /etc/sysconfig/static-routes-ipv6 | while read device args; do
+ if [ "$device" = "sit0" ]; then
+ ifup_ipv6_route $args ::$IPV6TO4_RELAY sit0
+ fi
+ done
+ fi
+
+ if [ "$IPV6TO4_CONTROL_RADVD" = "yes" ]; then
+ if [ -z "$IPV6TO4_RADVD_PIDFILE" ]; then
+ # Take default
+ IPV6TO4_RADVD_PIDFILE="/var/run/radvd/radvd.pid"
+ fi
+
+ # Send SIGHUP to radvd
+ if [ -f "$IPV6TO4_RADVD_PIDFILE" ]; then
+ pid="`cat $IPV6TO4_RADVD_PIDFILE`"
+ if [ ! -z "$pid" ]; then
+ echo $"Trigger RADVD for IPv6to4 prefix recalculation"
+ kill -HUP $pid
+ else
+ false
+ fi
+ fi
+ if [ ! -z "$IPV6TO4_ROUTING" ]; then
+ # Generate 6to4 address
+ ipv6to4prefix="`create6to4prefix $ipv4addr`"
+ if [ ! -z "$ipv6to4prefix" ]; then
+ # Add route to local networks
+ for devsuf in $IPV6TO4_ROUTING; do
+ dev="`echo $devsuf | awk -F- '{ print $1 }'`"
+ suf="`echo $devsuf | awk -F- '{ print $2 }'`"
+ ifup_ipv6_route ${ipv6to4prefix}$suf :: $dev
+ done
+ else
+ echo $"Error occured while calculating the IPv6to4 prefix"
+ fi
+ else
+ echo $"RADVD control enabled, but config is not complete!"
+ fi
+ fi
+
+ # Beep
+ if [ -x /usr/bin/beep ]; then /usr/bin/beep -f 2666; else echo -en "\a" >/dev/console; fi
+ fi
+fi