aboutsummaryrefslogtreecommitdiffstats
path: root/po/zh_CN.po
diff options
context:
space:
mode:
Diffstat (limited to 'po/zh_CN.po')
-rw-r--r--po/zh_CN.po1071
1 files changed, 575 insertions, 496 deletions
diff --git a/po/zh_CN.po b/po/zh_CN.po
index ca17a649..db88026a 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -7,679 +7,758 @@
# Sarah Wang <sarahs@redhat.com>, 2003, 2004
# Wei Liu <LLIU@REDHAT.COM>, 2012
# Leah Liu <lliu@redhat.com>, 2016. #zanata
+# Charles Lee <lchopn@gmail.com>, 2020.
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"PO-Revision-Date: 2016-03-02 08:55+0000\n"
-"Last-Translator: Leah Liu <lliu@redhat.com>\n"
-"Language-Team: Chinese (China) <trans-zh_cn@lists.fedoraproject.org>\n"
+"PO-Revision-Date: 2020-07-05 11:27+0000\n"
+"Last-Translator: Charles Lee <lchopn@gmail.com>\n"
+"Language-Team: Chinese (Simplified) <https://translate.fedoraproject.org/"
+"projects/fedora-sysv/initscripts/zh_CN/>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Zanata 4.6.2\n"
+"X-Generator: Weblate 4.1.1\n"
-#: ../sysconfig/network-scripts/network-functions-ipv6:904
-msgid "No parameters given to setup a default route"
-msgstr "设置默认路由的参数未给定"
-
-#: ../sysconfig/network-scripts/ifup-aliases:67
-msgid "usage: ifup-aliases <net-device> [<parent-config>]\n"
-msgstr "用法:ifup-aliases <net-device> [<parent-config>]\n"
-
-#: ../sysconfig/network-scripts/ifup-sit:63
-msgid "Missing remote IPv4 address of tunnel, configuration is not valid"
-msgstr "缺少隧道的远程 IPv4 地址,配置无效!"
+#: ../network-scripts/ifdown:15 ../network-scripts/ifdown:22
+msgid "usage: ifdown <configuration>"
+msgstr "用法:ifdown <configuration>"
-#: ../rc.d/init.d/functions:478
-msgid "${base} status unknown due to insufficient privileges."
-msgstr "由于权限不足,${base} 状态未知。"
+#: ../network-scripts/ifdown:33 ../network-scripts/ifup:49
+msgid "Users cannot control this device."
+msgstr "用户不能控制这一设备。"
-#: ../sysconfig/network-scripts/network-functions-ipv6:145
-msgid "Missing parameter 'IPv6-address' (arg 2)"
-msgstr "缺少参数 'IPv6-address' (参数2)"
+#: ../network-scripts/ifdown:40
+msgid ""
+"You are using 'ifdown' script provided by 'network-scripts', which are now "
+"deprecated."
+msgstr "您正在使用由 ‘network-scripts’ 所提供的 ‘ifdown’,这一命令现在不推荐使用。"
-#: ../rc.d/init.d/functions:318 ../rc.d/init.d/functions:328
-msgid "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
-msgstr "用法:killproc [-p pidfile] [ -d delay] {program} [-signal]"
+#: ../network-scripts/ifdown:41 ../network-scripts/ifup:57
+#: ../etc/rc.d/init.d/network:53
+msgid "'network-scripts' will be removed from distribution in near future."
+msgstr "‘network-scripts’ 将在不久的将来的发行版中被移除。"
-#: ../sysconfig/network-scripts/ifup-ipv6:237
+#: ../network-scripts/ifdown:42 ../network-scripts/ifup:58
msgid ""
-"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of "
-"'$tunnelmtu', ignored"
-msgstr "警告:为 6to4 配置的 MTU“$IPV6TO4_MTU”超过了 “$tunnelmtu”的最大限值,已忽略。"
+"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/"
+"ifdown' scripts as well."
+msgstr "建议切换到 ‘NetworkManager’ 作为代替,它也提供了 ‘ifup/ifdown’ 脚本。"
-#: ../sysconfig/network-scripts/network-functions-ipv6:964
-msgid "Unsupported reason '$reason' for sending trigger to radvd"
-msgstr "不支持以原因 '$reason' 发送触发器给 radvd"
-
-#: ../sysconfig/network-scripts/ifup:111
-#: ../sysconfig/network-scripts/ifup-eth:96
+#: ../network-scripts/ifdown-eth:46 ../network-scripts/ifdown-eth:52
msgid ""
-"$alias device ${DEVICE} does not seem to be present, delaying "
-"initialization."
-msgstr "$alias 设备 ${DEVICE} 似乎不存在,推迟其初始化。"
+"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured "
+"address ${HWADDR}. Ignoring."
+msgstr ""
+"设备 ${DEVICE} 具有 MAC 地址 ${FOUNDMACADDR},而不是配置的地址 ${HWADDR}。忽"
+"略。"
-#: ../rc.d/init.d/functions:474
-msgid "${base} dead but pid file exists"
-msgstr "${base} 已死,但 pid 文件存在"
+#: ../network-scripts/ifdown-routes:6
+msgid "usage: ifdown-routes <net-device> [<nickname>]"
+msgstr "用法: ifdown-routes <net-device> [<nickname>]"
-#: ../sysconfig/network-scripts/ifup-aliases:273
-msgid "Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
+#: ../network-scripts/ifdown-sit:40 ../network-scripts/ifup-sit:58
+msgid ""
+"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and "
+"restart (IPv6) networking"
msgstr ""
+"在此处不支持设备 '$DEVICE' ,使用 IPV6_AUTOTUNNEL 设置并重启 (IPv6) 联网"
-#: ../sysconfig/network-scripts/ifup-eth:198
-msgid "Determining IP information for ${DEVICE}..."
-msgstr "正在确定 ${DEVICE} 的 IP 信息..."
+#: ../network-scripts/ifdown-tunnel:36 ../network-scripts/ifup-tunnel:68
+msgid "Device '$DEVICE' isn't supported as a valid GRE device name."
+msgstr "设备 '$DEVICE' 不是受支持的有效 GRE 设备名."
-#: ../rc.d/init.d/functions:531
-msgid "WARNING"
-msgstr "警告"
+#: ../network-scripts/ifup:30 ../network-scripts/ifup:38
+msgid "Usage: ifup <configuration>"
+msgstr "用法:ifup <设备名>"
-#: ../sysconfig/network-scripts/network-functions-ipv6:61
-msgid "Missing parameter 'IPv6-gateway' (arg 2)"
-msgstr "缺少参数 'IPv6-gateway' (参数2)"
+#: ../network-scripts/ifup:37
+msgid "$0: configuration for ${1} not found."
+msgstr "$0: 未发现 ${1} 配置。"
-#: ../rc.d/init.d/functions:391
-msgid "Usage: pidfileofproc {program}"
-msgstr "用法:pidfileofproc {program}"
+#: ../network-scripts/ifup:56
+msgid ""
+"You are using 'ifup' script provided by 'network-scripts', which are now "
+"deprecated."
+msgstr "您正在使用由 ‘network-scripts’ 所提供的 ‘ifup’,这一命令现在不推荐使用。"
-#: ../rc.d/init.d/functions:308 ../rc.d/init.d/functions:308
-msgid "$base startup"
-msgstr "$base 启动"
+#: ../network-scripts/ifup:87 ../network-scripts/ifup:102
+msgid "PHYSDEV should be set for device ${DEVICE}"
+msgstr "应为设备 ${DEVICE} 设定 PHYSDEV"
-#: ../sysconfig/network-scripts/ifup-eth:43
-msgid "Device ${DEVICE} has different MAC address than expected, ignoring."
-msgstr " ${DEVICE} 设备的 MAC 地址与预期不符,忽略。"
+#: ../network-scripts/ifup:110
+msgid "No 802.1Q VLAN support available in kernel for device ${DEVICE}"
+msgstr "在内核中未提供对设备 ${DEVICE} 的 802.1Q VLAN 支持"
-#: ../sysconfig/network-scripts/network-functions-ipv6:383
-msgid "Missing parameter 'address' (arg 1)"
-msgstr "缺少参数 'address' (参数1)"
+#: ../network-scripts/ifup:117 ../network-scripts/ifup-eth:123
+msgid ""
+"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+msgstr "$alias 设备 ${DEVICE} 似乎不存在,推迟其初始化。"
-#: ../rc.d/init.d/netconsole:93
-msgid "Server address not specified in /etc/sysconfig/netconsole"
-msgstr "服务器地址未在 /etc/sysconfig/netconsole 中指定"
+#: ../network-scripts/ifup:138 ../network-scripts/ifup:139
+msgid "ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
+msgstr "错误:无法在 dev ${PHYSDEV}上将 vlan ${VID} 添加为 ${DEVICE}"
-#: ../sysconfig/network-scripts/network-functions-ipv6:798
-msgid "Missing parameter 'IPv6 MTU' (arg 2)"
-msgstr "缺少参数 'IPv6 MTU' (参数2)"
+#: ../network-scripts/ifup-aliases:67
+msgid "usage: ifup-aliases <net-device> [<parent-config>]\n"
+msgstr "用法:ifup-aliases <net-device> [<parent-config>]\n"
-#: ../rc.d/init.d/network:70
-msgid "Bringing up loopback interface: "
-msgstr "正在打开环回接口:"
+#: ../network-scripts/ifup-aliases:119
+msgid "Missing config file $PARENTCONFIG."
+msgstr "缺少配置文件 $PARENTCONFIG。"
-#: ../rc.d/init.d/functions:520
-msgid "PASSED"
-msgstr "通过"
+#: ../network-scripts/ifup-aliases:169
+msgid "error in $FILE: invalid alias number"
+msgstr "$FILE 中出错:无效别名数"
-#: ../sysconfig/network-scripts/network-functions-ipv6:394
-msgid "Given address '$addr' is not a global IPv4 one (arg 1)"
-msgstr "所给的地址 '$addr' 不是全局通用的 IPv4 地址 (参数1)"
+#: ../network-scripts/ifup-aliases:179
+msgid "error in $FILE: already seen ipaddr $IPADDR in $ipseen"
+msgstr "$FILE 中出错:$ipseen 中已有 IP 地址 $IPADDR"
-#: ../sysconfig/network-scripts/network-functions-ipv6:706
-msgid "Missing parameter 'selection' (arg 2)"
-msgstr "缺少参数 'selection' (参数2)"
+#: ../network-scripts/ifup-aliases:184
+msgid "error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
+msgstr "$FILE 错误:已见设备 $parent_device:在 $devseen 中的 $DEVNUM"
-#: ../sysconfig/network-scripts/ifup-ipv6:222
-msgid ""
-"IPv6to4 configuration needs an IPv4 address on related interface or "
-"otherwise specified"
-msgstr "IPv6to4 配置需要一个在相关接口上的 IPv4 地址或另外指定。"
+#: ../network-scripts/ifup-aliases:193
+msgid "error in $FILE: didn't specify device or ipaddr"
+msgstr "$FILE 中出错:device 或 ipaddr 未指定"
-#: ../sysconfig/network-scripts/ifup-aliases:196
+#: ../network-scripts/ifup-aliases:198
msgid "error iN $FILE: didn't specify netmask or prefix"
msgstr "$FILE 出错:位指定子网掩码或前缀"
-#: ../sysconfig/network-scripts/ifdown-tunnel:36
-#: ../sysconfig/network-scripts/ifup-tunnel:63
-msgid "Device '$DEVICE' isn't supported as a valid GRE device name."
-msgstr "设备 '$DEVICE' 不是受支持的有效 GRE 设备名."
+#: ../network-scripts/ifup-aliases:238 ../network-scripts/ifup-aliases:249
+msgid "error in ifcfg-${parent_device}: files"
+msgstr "ifcfg-${parent_device} 中: 文件出错"
-#: ../sysconfig/network-scripts/ifup-ipv6:303
-msgid "radvd control enabled, but config is not complete"
-msgstr "radvd 控制已启用,但其配置不完整"
+#: ../network-scripts/ifup-aliases:269
+msgid ""
+"Determining if ip address ${IPADDR} is already in use for device "
+"${parent_device}..."
+msgstr "正在为 ${parent_device} 检测 IP 地址 ${IPADDR} 是否正在被使用……"
-#: ../sysconfig/network-scripts/ifup-eth:304
-msgid "Error adding default gateway for ${REALDEVICE}."
-msgstr "为 ${REALDEVICE} 添加默认网关出错。"
+#: ../network-scripts/ifup-aliases:273
+msgid "Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
+msgstr "错误,某个其他的主机($ARPINGMAC)已经使用了地址 ${IPADDR} 。"
-#: ../rc.d/init.d/network:246
-msgid "Usage: $0 {start|stop|status|restart|reload|force-reload}"
-msgstr "用法:$0 {start|stop|status|restart|reload|force-reload}"
+#: ../network-scripts/ifup-aliases:334
+msgid "error in $FILE: IPADDR_START and IPADDR_END don't agree"
+msgstr "$FILE 中出错:IPADDR_START 和 IPADDR_END 不符"
-#: ../sysconfig/network-scripts/network-functions-ipv6:603
-msgid "Tunnel device '$device' creation didn't work"
-msgstr "隧道设备 '$device' 创建无效"
+#: ../network-scripts/ifup-aliases:339
+msgid "error in $FILE: IPADDR_START greater than IPADDR_END"
+msgstr "$FILE 中的错误:IPADDR_START 大于 IPADDR_END"
-#: ../sysconfig/network-scripts/network-functions:636
-msgid "DEBUG "
-msgstr ""
+#: ../network-scripts/ifup-ctc:36
+msgid "ERROR: ${DEVICE} did not come up!"
+msgstr "错误:${DEVICE} 未出现!"
-#: ../sysconfig/network-scripts/ifdown-eth:46
-#: ../sysconfig/network-scripts/ifdown-eth:52
+#: ../network-scripts/ifup-eth:43
+msgid "Device ${DEVICE} has different MAC address than expected, ignoring."
+msgstr "设备 ${DEVICE} 的 MAC 地址与预期不符,忽略。"
+
+#: ../network-scripts/ifup-eth:116
+msgid "Device name does not seem to be present."
+msgstr "设备名称似乎不存在。"
+
+#: ../network-scripts/ifup-eth:125
+msgid "Device ${DEVICE} does not seem to be present, delaying initialization."
+msgstr "设备 ${DEVICE} 似乎不存在, 延迟初始化操作。"
+
+#: ../network-scripts/ifup-eth:221
+msgid "Determining IP information for ${DEVICE}..."
+msgstr "正在确定 ${DEVICE} 的 IP 信息..."
+
+#: ../network-scripts/ifup-eth:223
+msgid " failed; no link present. Check cable?"
+msgstr " 失败:不存在链接。检查电缆?"
+
+#: ../network-scripts/ifup-eth:230 ../network-scripts/ifup-eth:378
+msgid " done."
+msgstr " 完成。"
+
+#: ../network-scripts/ifup-eth:233 ../network-scripts/ifup-eth:380
+msgid " failed."
+msgstr " 失败。"
+
+#: ../network-scripts/ifup-eth:257
+msgid "Failed to bring up ${DEVICE}."
+msgstr "启动 ${DEVICE} 失败。"
+
+#: ../network-scripts/ifup-eth:288
msgid ""
-"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured "
-"address ${HWADDR}. Ignoring."
-msgstr "设备 ${DEVICE} 具有 MAC 地址 ${FOUNDMACADDR},而不是配置的地址 ${HWADDR}。忽略。"
+"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
+msgstr "错误,某个其他的主机($ARPINGMAC)已经使用了地址 ${ipaddr[$idx]} 。"
-#: ../rc.d/init.d/functions:509
-msgid "FAILED"
-msgstr "失败"
+#: ../network-scripts/ifup-eth:295
+msgid "Error adding address ${ipaddr[$idx]} for ${DEVICE}."
+msgstr "为 ${DEVICE} 添加地址 ${ipaddr[$idx]} 出错。"
+
+#: ../network-scripts/ifup-eth:322
+msgid "Error adding default gateway ${GATEWAY} for ${DEVICE}."
+msgstr "为 ${DEVICE} 添加地址 ${GATEWAY} 出错。"
-#: ../sysconfig/network-scripts/ifup-eth:336
+#: ../network-scripts/ifup-eth:327
+msgid "Error adding default gateway for ${REALDEVICE}."
+msgstr "为 ${REALDEVICE} 添加默认网关出错。"
+
+#: ../network-scripts/ifup-eth:365
msgid "Determining IPv6 information for ${DEVICE}..."
msgstr "正在确定 ${DEVICE} 的 IPv6 信息......"
-#: ../rc.d/init.d/functions:490
-msgid "${base} is stopped"
-msgstr "已停止 ${base}"
+#: ../network-scripts/ifup-ippp:55
+msgid "$*"
+msgstr "$*"
-#: ../rc.d/init.d/functions:227 ../rc.d/init.d/functions:265
-msgid "$0: Usage: daemon [+/-nicelevel] {program}"
-msgstr "$0: 用法:daemon [+/-nicelevel] {program}"
+#: ../network-scripts/ifup-ippp:374
+msgid ""
+"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using "
+"encapsulation 'syncppp'"
+msgstr "警告:ipppd(内核 2.4.x 及更低版本)不支持使用封装“syncppp”的 IPv6"
-#: ../sysconfig/network-scripts/ifup-aliases:167
-msgid "error in $FILE: invalid alias number"
-msgstr "$FILE 中出错:无效别名数"
+#: ../network-scripts/ifup-ippp:376
+msgid "Warning: link doesn't support IPv6 using encapsulation 'rawip'"
+msgstr "警告:链接不支持使用封装“rawip”的 IPv6"
-#: ../sysconfig/network-scripts/network-functions:639
-msgid "ERROR "
-msgstr ""
+#: ../network-scripts/ifup-ipv6:99
+msgid ""
+"Global IPv6 forwarding is enabled in configuration, but not currently "
+"enabled in kernel"
+msgstr "IPv6 全局转发已在配置中启用,但当前未在内核中启用"
-#: ../sysconfig/network-scripts/network-functions:642
-msgid "WARN "
-msgstr ""
+#: ../network-scripts/ifup-ipv6:100 ../network-scripts/ifup-ipv6:119
+msgid "Please restart network with '/sbin/service network restart'"
+msgstr "请使用“/sbin/service network restart”重启网络"
-#: ../sysconfig/network-scripts/network-functions-ipv6:159
-msgid "Device '$device' doesn't exist"
-msgstr "设备 '$device' 不存在"
+#: ../network-scripts/ifup-ipv6:118
+msgid ""
+"Global IPv6 forwarding is disabled in configuration, but not currently "
+"disabled in kernel"
+msgstr "IPv6 全局转发已在配置中禁用,但当前未在内核中禁用"
-#: ../sysconfig/network-scripts/ifup:30 ../sysconfig/network-scripts/ifup:38
-msgid "Usage: ifup <configuration>"
-msgstr "用法:ifup <设备名>"
+#: ../network-scripts/ifup-ipv6:157
+msgid ""
+"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
+msgstr "无法启用 IPv6 私有方法 '$IPV6_PRIVACY' ,内核不支持"
-#: ../sysconfig/network-scripts/ifup:132 ../sysconfig/network-scripts/ifup:133
-msgid "ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
-msgstr "错误:无法在 dev ${PHYSDEV}上将 vlan ${VID} 添加为 ${DEVICE}"
+#: ../network-scripts/ifup-ipv6:182
+msgid "Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+msgstr "设备 'tun6to4'(来自 '$DEVICE')已在运行,请先关闭"
-#: ../sysconfig/network-scripts/ifup-ctc:36
-msgid "ERROR: ${DEVICE} did not come up!"
-msgstr "错误:${DEVICE} 未出现!"
+#: ../network-scripts/ifup-ipv6:209
+msgid "Given IPv4 address '$ipv4addr' is not globally usable"
+msgstr "给定 IPv4 地址 '$ipv4addr' 不是全局通用的"
+
+#: ../network-scripts/ifup-ipv6:222
+msgid ""
+"IPv6to4 configuration needs an IPv4 address on related interface or "
+"otherwise specified"
+msgstr "IPv6to4 配置需要一个在相关接口上的 IPv4 地址或另外指定"
-#: ../sysconfig/network-scripts/ifup-ipv6:251
+#: ../network-scripts/ifup-ipv6:237
msgid ""
-"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
+"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of "
+"'$tunnelmtu', ignored"
+msgstr "警告:为 6to4 配置的 MTU ‘$IPV6TO4_MTU’ 超过了 ‘$tunnelmtu’ 的最大限值,已忽略"
+
+#: ../network-scripts/ifup-ipv6:251
+msgid "Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
msgstr "警告:接口“tun6to4”不支持“IPV6_DEFAULTGW”,忽略"
-#: ../sysconfig/network-scripts/init.ipv6-global:161
-msgid "Usage: $0 {start|stop|reload|restart|showsysctl}"
-msgstr "用法:$0 {start|stop|reload|restart|showsysctl}"
+#: ../network-scripts/ifup-ipv6:287
+msgid ""
+"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't"
+msgstr "通常应启用 6to4 和 RADVD IPv6 转发,但未启用"
-#: ../sysconfig/network-scripts/ifup-eth:98
-msgid "Device ${DEVICE} does not seem to be present, delaying initialization."
-msgstr "设备 ${DEVICE} 似乎不存在, 延迟初始化操作。"
+#: ../network-scripts/ifup-ipv6:300
+msgid "Error occurred while calculating the IPv6to4 prefix"
+msgstr "IPv6to4 前缀计算出错"
-#: ../sysconfig/network-scripts/network-functions-ipv6:841
-msgid "Given IPv6 default gateway '$address' is not in proper format"
-msgstr "指定的 IPv6 默认网关 '$address' 格式不正确"
+#: ../network-scripts/ifup-ipv6:303
+msgid "radvd control enabled, but config is not complete"
+msgstr "radvd 控制已启用,但其配置不完整"
-#: ../sysconfig/network-scripts/network-functions-ipv6:140
-#: ../sysconfig/network-scripts/network-functions-ipv6:203
-#: ../sysconfig/network-scripts/network-functions-ipv6:232
-#: ../sysconfig/network-scripts/network-functions-ipv6:312
-#: ../sysconfig/network-scripts/network-functions-ipv6:427
-#: ../sysconfig/network-scripts/network-functions-ipv6:489
-#: ../sysconfig/network-scripts/network-functions-ipv6:523
-#: ../sysconfig/network-scripts/network-functions-ipv6:565
-#: ../sysconfig/network-scripts/network-functions-ipv6:643
-#: ../sysconfig/network-scripts/network-functions-ipv6:701
-#: ../sysconfig/network-scripts/network-functions-ipv6:754
-#: ../sysconfig/network-scripts/network-functions-ipv6:793
-#: ../sysconfig/network-scripts/network-functions-ipv6:921
-#: ../sysconfig/network-scripts/network-functions-ipv6:1054
-msgid "Missing parameter 'device' (arg 1)"
-msgstr "缺少参数 'device' (参数1)"
+#: ../network-scripts/ifup-ipv6:310
+msgid "6to4 configuration is not valid"
+msgstr "6to4 配置无效"
-#: ../rc.d/init.d/network:75
-msgid "No 802.1Q VLAN support available in kernel."
-msgstr "内核中没有 802.1Q VLAN 支持。"
+#: ../network-scripts/ifup-post:114
+msgid "/etc/resolv.conf was not updated: failed to create temporary file"
+msgstr "/etc/resolv.conf 没有被更新:创建临时文件失败"
-#: ../sysconfig/network-scripts/ifup-eth:299
-msgid "Error adding default gateway ${GATEWAY} for ${DEVICE}."
-msgstr "为 ${DEVICE} 添加地址 ${GATEWAY} 出错。"
+#: ../network-scripts/ifup-routes:6
+msgid "usage: ifup-routes <net-device> [<nickname>]"
+msgstr "用法: ifup-routes <net-device> [<nickname>]"
-#: ../sysconfig/network-scripts/ifup-sit:71
+#: ../network-scripts/ifup-sit:63
+msgid "Missing remote IPv4 address of tunnel, configuration is not valid"
+msgstr "缺少隧道的远程 IPv4 地址,配置无效"
+
+#: ../network-scripts/ifup-sit:71
msgid "Device '$DEVICE' is already up, please shutdown first"
msgstr "设备“$DEVICE”已打开,请先关闭"
-#: ../rc.d/init.d/netconsole:36
-msgid "Usage: $0 {start|stop|status|restart|condrestart}"
-msgstr "用法:$0 {start|stop|status|restart|condrestart}"
+#: ../network-scripts/ifup-tunnel:61
+msgid "Invalid tunnel type $TYPE"
+msgstr "隧道类型 $TYPE 无效"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1066
-msgid "Duplicate Address Detection: Duplicate addresses detected"
+#: ../network-scripts/init.ipv6-global:161
+msgid "Usage: $0 {start|stop|reload|restart|showsysctl}"
+msgstr "用法:$0 {start|stop|reload|restart|showsysctl}"
+
+#: ../network-scripts/network-functions:401
+msgid ""
+"Both 'DHCP_HOSTNAME=${DHCP_HOSTNAME}' and 'DHCP_FQDN=${DHCP_FQDN}' are "
+"configured... Using DHCP_FQDN."
msgstr ""
+"‘DHCP_HOSTNAME=${DHCP_HOSTNAME}’ 和 ‘DHCP_FQDN=${DHCP_FQDN}’ 都已配置……使用 "
+"DHCP_FQDN。"
-#: ../sysconfig/network-scripts/ifup-aliases:237
-#: ../sysconfig/network-scripts/ifup-aliases:248
-msgid "error in ifcfg-${parent_device}: files"
-msgstr "ifcfg-${parent_device} 中: 文件出错"
+#: ../network-scripts/network-functions:569
+msgid "Failed to set value '$value' [mode] to ${DEVICE} bonding device"
+msgstr "设置值 '$value' [mode] 给绑定设备 ${DEVICE} 时失败"
-#: ../sysconfig/network-scripts/network-functions-ipv6:804
-msgid "Given IPv6 MTU '$ipv6_mtu' is out of range"
-msgstr "给定的 IPv6 MTU '$ipv6_mtu' 超出范围"
+#: ../network-scripts/network-functions:575
+msgid "Failed to set value '$value' [miimon] to ${DEVICE} bonding device"
+msgstr "设置值 '$value' [miimon] 给绑定设备 ${DEVICE} 时失败"
-#: ../sysconfig/network-scripts/ifup-aliases:340
-msgid "error in $FILE: IPADDR_START greater than IPADDR_END"
-msgstr "$FILE 中的错误:IPADDR_START 大于 IPADDR_END"
+#: ../network-scripts/network-functions:595
+msgid ""
+"Failed to set '$arp_ip' value [arp_ip_target] to ${DEVICE} bonding device"
+msgstr "设置 '$arp_ip' 值 [arp_ip_target] 给绑定设备 ${DEVICE} 时失败"
-#: ../sysconfig/network-scripts/ifup-aliases:182
-msgid "error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
-msgstr "$FILE 错误:已见设备 $parent_device:在 $devseen 中的 $DEVNUM"
+#: ../network-scripts/network-functions:603
+msgid ""
+"Failed to set '$value' value [arp_ip_target] to ${DEVICE} bonding device"
+msgstr "设置 '$value' 值 [arp_ip_target] 给绑定设备 ${DEVICE} 时失败"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1079
-msgid "Some IPv6 address(es) of ${device} remain still in 'tentative' state"
-msgstr ""
+#: ../network-scripts/network-functions:608
+msgid "Failed to set '$value' value [$key] to ${DEVICE} bonding device"
+msgstr "设置 '$value' 值 [$key] 给绑定设备 ${DEVICE} 时失败"
-#: ../sysconfig/network-scripts/ifup-ipv6:100
-#: ../sysconfig/network-scripts/ifup-ipv6:119
-msgid "Please restart network with '/sbin/service network restart'"
-msgstr "请使用“/sbin/service network restart”重启网络"
+#: ../network-scripts/network-functions:681
+msgid "DEBUG "
+msgstr "DEBUG "
-#: ../rc.d/init.d/functions:498
-msgid " OK "
-msgstr " 确定 "
+#: ../network-scripts/network-functions:684
+msgid "ERROR "
+msgstr "ERROR "
-#: ../sysconfig/network-scripts/ifup-aliases:191
-msgid "error in $FILE: didn't specify device or ipaddr"
-msgstr "$FILE 中出错:device 或 ipaddr 未指定"
+#: ../network-scripts/network-functions:687
+msgid "WARN "
+msgstr "WARN "
-#: ../sysconfig/network-scripts/ifdown:33 ../sysconfig/network-scripts/ifup:49
-msgid "Users cannot control this device."
-msgstr "用户不能控制这一设备。"
+#: ../network-scripts/network-functions:690
+msgid "INFO "
+msgstr "INFO "
-#: ../sysconfig/network-scripts/ifup:81 ../sysconfig/network-scripts/ifup:96
-msgid "PHYSDEV should be set for device ${DEVICE}"
-msgstr "应为设备 ${DEVICE} 设定 PHYSDEV"
+#: ../network-scripts/network-functions-ipv6:56
+msgid "Missing parameter 'IPv6-network' (arg 1)"
+msgstr "缺少参数 'IPv6-network' (参数1)"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1031
-msgid "radvd not (properly) installed, triggering failed"
-msgstr "未 (正确) 安装 radvd, 触发失败"
+#: ../network-scripts/network-functions-ipv6:61
+msgid "Missing parameter 'IPv6-gateway' (arg 2)"
+msgstr "缺少参数 'IPv6-gateway' (参数2)"
-#: ../sysconfig/network-scripts/ifup-eth:210
-#: ../sysconfig/network-scripts/ifup-eth:349
-msgid " failed."
-msgstr "失败。"
+#: ../network-scripts/network-functions-ipv6:86
+msgid ""
+"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' "
+"through device '$device'"
+msgstr ""
+"“ 没有到达主机的路由” 正在添加经过网关 '$gatewayipv6' 通过设备 '$device' 的路"
+"由 '$networkipv6'"
-#: ../rc.d/init.d/functions:406
-msgid "Usage: pidofproc [-p pidfile] {program}"
-msgstr "用法:pidofproc [-p pidfile] {program}"
+#: ../network-scripts/network-functions-ipv6:89
+msgid "Unknown error"
+msgstr "未知错误"
-#: ../rc.d/init.d/network:233
-msgid "Configured devices:"
-msgstr "已配置设备:"
+#: ../network-scripts/network-functions-ipv6:114
+msgid "Tunnel device 'sit0' enabling didn't work"
+msgstr "隧道设备 'sit0' 启动无效"
-#: ../sysconfig/network-scripts/network-functions-ipv6:895
-msgid "Given IPv6 default device '$device' requires an explicit nexthop"
-msgstr "给定的 IPv6 默认设备 '$device' 需要明确的下一跳"
+#: ../network-scripts/network-functions-ipv6:140
+#: ../network-scripts/network-functions-ipv6:203
+#: ../network-scripts/network-functions-ipv6:232
+#: ../network-scripts/network-functions-ipv6:312
+#: ../network-scripts/network-functions-ipv6:427
+#: ../network-scripts/network-functions-ipv6:489
+#: ../network-scripts/network-functions-ipv6:523
+#: ../network-scripts/network-functions-ipv6:565
+#: ../network-scripts/network-functions-ipv6:643
+#: ../network-scripts/network-functions-ipv6:701
+#: ../network-scripts/network-functions-ipv6:754
+#: ../network-scripts/network-functions-ipv6:793
+#: ../network-scripts/network-functions-ipv6:921
+#: ../network-scripts/network-functions-ipv6:1054
+msgid "Missing parameter 'device' (arg 1)"
+msgstr "缺少参数 'device' (参数1)"
-#: ../rc.d/init.d/functions:33
-msgid "Starting $prog (via systemctl): "
-msgstr "正在启动 $prog (via systemctl):"
+#: ../network-scripts/network-functions-ipv6:145
+msgid "Missing parameter 'IPv6-address' (arg 2)"
+msgstr "缺少参数 'IPv6-address' (参数2)"
-#: ../sysconfig/network-scripts/ifdown:15
-#: ../sysconfig/network-scripts/ifdown:22
-msgid "usage: ifdown <configuration>"
-msgstr "用法:ifdown <configuration>"
+#: ../network-scripts/network-functions-ipv6:159
+msgid "Device '$device' doesn't exist"
+msgstr "设备 '$device' 不存在"
-#: ../sysconfig/network-scripts/ifup-ipv6:287
-msgid ""
-"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't"
-msgstr "通常应启用 6to4 和 RADVD IPv6 转发,但未启用"
+#: ../network-scripts/network-functions-ipv6:165
+msgid "Device '$device' enabling didn't work"
+msgstr "设备 '$device' 启用无效"
-#: ../sysconfig/network-scripts/network-functions-ipv6:438
-#: ../sysconfig/network-scripts/network-functions-ipv6:495
-#: ../sysconfig/network-scripts/network-functions-ipv6:534
-msgid "Given device '$device' is not supported (arg 1)"
-msgstr "不支持给定的设备 '$device' (参数 1)"
+#: ../network-scripts/network-functions-ipv6:186
+msgid "Cannot add IPv6 address '$address' on dev '$device'"
+msgstr "无法在设备 '$device' 上添加 IPv6 地址 '$address'"
-#: ../rc.d/init.d/network:166
-msgid "rootfs or /usr is on network filesystem, leaving network up"
-msgstr ""
+#: ../network-scripts/network-functions-ipv6:343
+msgid "Missing parameter 'IPv4 address' (arg 1)"
+msgstr "缺少参数 'IPv4 address' (参数 1)"
-#: ../rc.d/init.d/netconsole:128
-msgid "netconsole module loaded"
-msgstr "已载入 netconsole 模块"
+#: ../network-scripts/network-functions-ipv6:383
+msgid "Missing parameter 'address' (arg 1)"
+msgstr "缺少参数 'address' (参数1)"
-#: ../rc.d/init.d/functions:348 ../rc.d/init.d/functions:358
-#: ../rc.d/init.d/functions:358 ../rc.d/init.d/functions:373
-msgid "$base shutdown"
-msgstr "$base 关闭"
+#: ../network-scripts/network-functions-ipv6:394
+msgid "Given address '$addr' is not a global IPv4 one (arg 1)"
+msgstr "所给的地址 '$addr' 不是全局通用的 IPv4 地址 (参数1)"
-#: ../sysconfig/network-scripts/ifup-tunnel:56
-msgid "Invalid tunnel type $TYPE"
-msgstr "隧道类型 $TYPE 无效"
+#: ../network-scripts/network-functions-ipv6:398
+msgid "Given address '$addr' is not a valid IPv4 one (arg 1)"
+msgstr "给定地址“$addr”不是有效 IPv4 地址(参数 1)"
-#: ../sysconfig/network-scripts/ifup:37
-msgid "$0: configuration for ${1} not found."
-msgstr "$0: 未发现 ${1} 配置。"
+#: ../network-scripts/network-functions-ipv6:432
+msgid "Missing parameter 'global IPv4 address' (arg 2)"
+msgstr "缺少参数 'global IPv4 address' (参数2)"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1071
-msgid ""
-"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' "
-"state"
-msgstr ""
+#: ../network-scripts/network-functions-ipv6:438
+#: ../network-scripts/network-functions-ipv6:495
+#: ../network-scripts/network-functions-ipv6:534
+msgid "Given device '$device' is not supported (arg 1)"
+msgstr "不支持给定的设备 '$device' (参数 1)"
-#: ../sysconfig/network-scripts/network-functions-ipv6:86
-msgid ""
-"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' "
-"through device '$device'"
-msgstr ""
-"“ 没有到达主机的路由” 正在添加经过网关 '$gatewayipv6' 通过设备 '$device' 的路由 '$networkipv6'"
+#: ../network-scripts/network-functions-ipv6:528
+msgid "Missing parameter 'local IPv4 address' (arg 2)"
+msgstr "缺少参数“本地 IPv4 地址”(参数2)"
-#: ../rc.d/init.d/network:127 ../rc.d/init.d/network:134
-msgid "Bringing up interface $i: "
-msgstr "正在打开接口 $i:"
+#: ../network-scripts/network-functions-ipv6:570
+msgid "Missing parameter 'IPv4-tunnel address' (arg 2)"
+msgstr "缺少参数“IPv4 隧道地址” ( 参数2)"
-#: ../service:86
+#: ../network-scripts/network-functions-ipv6:590
msgid ""
-"Redirecting to /bin/systemctl ${ACTION}${OPTIONS:+ }${OPTIONS} "
-"${SERVICE_MANGLED}"
+"Given remote address '$addressipv4tunnel' on tunnel device '$device' is "
+"already configured on device '$devnew'"
msgstr ""
+"在隧道设备 '$device' 上指定的远端地址 '$addressipv4tunnel' 已在设备 "
+"'$devnew' 上配置"
-#: ../sysconfig/network-scripts/ifdown-routes:6
-msgid "usage: ifdown-routes <net-device> [<nickname>]"
-msgstr "用法: ifdown-routes <net-device> [<nickname>]"
+#: ../network-scripts/network-functions-ipv6:603
+msgid "Tunnel device '$device' creation didn't work"
+msgstr "隧道设备 '$device' 创建无效"
-#: ../sysconfig/network-scripts/ifup-eth:51
-msgid "Bridge support not available: brctl not found"
-msgstr "网桥支持不可用:未找到 brctl"
+#: ../network-scripts/network-functions-ipv6:610
+msgid "Tunnel device '$device' bringing up didn't work"
+msgstr "隧道设备 '$device' 启动失败"
-#: ../rc.d/init.d/network:236
-msgid "Currently active devices:"
-msgstr "当前活跃设备:"
+#: ../network-scripts/network-functions-ipv6:706
+msgid "Missing parameter 'selection' (arg 2)"
+msgstr "缺少参数 'selection' (参数2)"
-#: ../sysconfig/network-scripts/network-functions-ipv6:590
-msgid ""
-"Given remote address '$addressipv4tunnel' on tunnel device '$device' is "
-"already configured on device '$devnew'"
-msgstr "在隧道设备 '$device' 上指定的远端地址 '$addressipv4tunnel' 已在设备 '$devnew' 上配置"
+#: ../network-scripts/network-functions-ipv6:710
+msgid "Unsupported selection '$selection' specified (arg 2)"
+msgstr "不支持指定的 '$selection' 选项 (参数 2)"
-#: ../sysconfig/network-scripts/ifdown-sit:40
-#: ../sysconfig/network-scripts/ifup-sit:58
-msgid ""
-"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and "
-"restart (IPv6) networking"
-msgstr "在此处不支持设备 '$DEVICE' ,使用 IPV6_AUTOTUNNEL 设置并重启 (IPv6) 联网"
+#: ../network-scripts/network-functions-ipv6:798
+msgid "Missing parameter 'IPv6 MTU' (arg 2)"
+msgstr "缺少参数 'IPv6 MTU' (参数2)"
-#: ../sysconfig/network-scripts/network-functions-ipv6:343
-msgid "Missing parameter 'IPv4 address' (arg 1)"
-msgstr "缺少参数 'IPv4 address' (参数 1)"
+#: ../network-scripts/network-functions-ipv6:804
+msgid "Given IPv6 MTU '$ipv6_mtu' is out of range"
+msgstr "给定的 IPv6 MTU '$ipv6_mtu' 超出范围"
-#: ../rc.d/init.d/network:215
-msgid "Shutting down interface $i: "
-msgstr "正在关闭接口 $i:"
+#: ../network-scripts/network-functions-ipv6:841
+msgid "Given IPv6 default gateway '$address' is not in proper format"
+msgstr "指定的 IPv6 默认网关 '$address' 格式不正确"
-#: ../sysconfig/network-scripts/ifup-ippp:374
+#: ../network-scripts/network-functions-ipv6:847
msgid ""
-"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using "
-"encapsulation 'syncppp'"
-msgstr "警告:ipppd(内核 2.4.x 及更低版本)不支持使用封装“syncppp”的 IPv6"
+"Given IPv6 default gateway '$address' has scope '$device_scope' defined, "
+"given default gateway device '$device' will be not used"
+msgstr ""
+"给定的 IPv6 默认网关 '$address' 具有已定义的范围 '$device_scope' , 给定的网"
+"关设备 '$device' 将不再使用"
-#: ../sysconfig/network-scripts/ifup-ipv6:99
+#: ../network-scripts/network-functions-ipv6:855
msgid ""
-"Global IPv6 forwarding is enabled in configuration, but not currently "
-"enabled in kernel"
-msgstr "IPv6 全局转发已在配置中启用,但当前未在内核中启用。"
-
-#: ../rc.d/init.d/functions:39
-msgid "Reloading $prog configuration (via systemctl): "
-msgstr "正在重载 $prog 配置(透过 systemctl):"
+"Given IPv6 default gateway '$address' is link-local, but no scope or gateway "
+"device is specified"
+msgstr ""
+"给定的 IPv6 默认网关 '$address' 是链路本地地址, 但是没有指定范围或网关设备"
-#: ../rc.d/init.d/netconsole:108
-msgid "Initializing netconsole"
-msgstr "正在初始化 netconsole"
+#: ../network-scripts/network-functions-ipv6:895
+msgid "Given IPv6 default device '$device' requires an explicit nexthop"
+msgstr "给定的 IPv6 默认设备 '$device' 需要明确的下一跳"
-#: ../sysconfig/network-scripts/ifup-ippp:55
-msgid "$*"
-msgstr "$*"
+#: ../network-scripts/network-functions-ipv6:898
+msgid "Given IPv6 default device '$device' doesn't exist or isn't up"
+msgstr "指定的 IPv6 默认设备 '$device' 不存在或未启动"
-#: ../sysconfig/network-scripts/network-functions-ipv6:855
-msgid ""
-"Given IPv6 default gateway '$address' is link-local, but no scope or gateway"
-" device is specified"
-msgstr "给定的 IPv6 默认网关 '$address' 是链路本地地址, 但是没有指定范围或网关设备"
+#: ../network-scripts/network-functions-ipv6:904
+msgid "No parameters given to setup a default route"
+msgstr "设置默认路由的参数未给定"
-#: ../sysconfig/network-scripts/network-functions:645
-msgid "INFO "
-msgstr ""
+#: ../network-scripts/network-functions-ipv6:959
+msgid "No reason given for sending trigger to radvd"
+msgstr "未给出发送触发器给 radvd 的理由"
-#: ../sysconfig/network-scripts/network-functions-ipv6:610
-msgid "Tunnel device '$device' bringing up didn't work"
-msgstr "隧道设备 '$device' 启动失败"
+#: ../network-scripts/network-functions-ipv6:964
+msgid "Unsupported reason '$reason' for sending trigger to radvd"
+msgstr "不支持以原因 '$reason' 发送触发器给 radvd"
-#: ../sysconfig/network-scripts/network-functions-ipv6:993
+#: ../network-scripts/network-functions-ipv6:993
msgid "Unsupported mechanism '$mechanism' for sending trigger to radvd"
msgstr "不支持“$mechanism”机制用于发送触发器给 radvd"
-#: ../sysconfig/network-scripts/network-functions-ipv6:398
-msgid "Given address '$addr' is not a valid IPv4 one (arg 1)"
-msgstr "给定地址“$addr”不是有效 IPv4 地址(参数 1)"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:432
-msgid "Missing parameter 'global IPv4 address' (arg 2)"
-msgstr "缺少参数 'global IPv4 address' (参数2)"
+#: ../network-scripts/network-functions-ipv6:1005
+msgid "Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd"
+msgstr "给定的 pid 文件 '$pidfile' 不存在, 无法发送触发器给 radvd"
-#: ../rc.d/init.d/netconsole:131
-msgid "netconsole module not loaded"
-msgstr "未加载 netconsole 模块"
+#: ../network-scripts/network-functions-ipv6:1014
+msgid "Pidfile '$pidfile' is empty, cannot send trigger to radvd"
+msgstr "pidfile '$pidfile' 无内容, 无法发送触发器给 radvd"
-#: ../sysconfig/network-scripts/network-functions-ipv6:89
-msgid "Unknown error"
-msgstr "未知错误"
+#: ../network-scripts/network-functions-ipv6:1031
+msgid "radvd not (properly) installed, triggering failed"
+msgstr "未 (正确) 安装 radvd, 触发失败"
-#: ../rc.d/init.d/functions:432
-msgid "Usage: status [-p pidfile] {program}"
-msgstr "用法:status [-p pidfile] {program}"
+#: ../network-scripts/network-functions-ipv6:1066
+msgid "Duplicate Address Detection: Duplicate addresses detected"
+msgstr "重复地址检查:检查到重复的地址"
-#: ../sysconfig/network-scripts/ifup-ipv6:310
-msgid "6to4 configuration is not valid"
-msgstr "6to4 配置无效"
+#: ../network-scripts/network-functions-ipv6:1067
+msgid "Duplicate Address Detection: Please, fix your network configuration"
+msgstr "重复地址检查:请修正您的网络配置"
-#: ../sysconfig/network-scripts/ifup-aliases:335
-msgid "error in $FILE: IPADDR_START and IPADDR_END don't agree"
-msgstr "$FILE 中出错:IPADDR_START 和 IPADDR_END 不符"
+#: ../network-scripts/network-functions-ipv6:1071
+msgid ""
+"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' "
+"state"
+msgstr "等待接口 ${device} 的 IPv6 地址退出 ‘tentative’ 状态"
-#: ../rc.d/init.d/functions:364 ../rc.d/init.d/functions:364
-msgid "$base $killlevel"
-msgstr "$base $killlevel"
+#: ../network-scripts/network-functions-ipv6:1079
+msgid "Some IPv6 address(es) of ${device} remain still in 'tentative' state"
+msgstr "设备 ${device} 上的一些 IPv6 地址仍然处于 ‘tentative’ 状态"
-#: ../sysconfig/network-scripts/ifup-eth:200
-msgid " failed; no link present. Check cable?"
-msgstr "失败:不存在链接。检查电缆?"
+#: ../network-scripts/network-functions-ipv6:1080
+msgid "Run 'ip -6 addr show dev ${device} scope global tentative' to see more"
+msgstr "运行 ‘ip -6 addr show dev ${device} scope global tentative’ 查看更多"
-#: ../sysconfig/network-scripts/ifup-ipv6:118
+#: ../usr/sbin/service:95
msgid ""
-"Global IPv6 forwarding is disabled in configuration, but not currently "
-"disabled in kernel"
-msgstr "IPv6 全局转发已在配置中禁用,但当前未在内核中禁用。"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:165
-msgid "Device '$device' enabling didn't work"
-msgstr "设备 '$device' 启用无效"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:186
-msgid "Cannot add IPv6 address '$address' on dev '$device'"
-msgstr "无法在设备 '$device' 上添加 IPv6 地址 '$address' "
+"Redirecting to /bin/systemctl ${ACTION}${OPTIONS:+ }${OPTIONS} "
+"${SERVICE_MANGLED}"
+msgstr "重定向至 /bin/systemctl ${ACTION}${OPTIONS:+ }${OPTIONS} ${SERVICE_MANGLED}"
-#: ../service:89
+#: ../usr/sbin/service:98
msgid ""
"The service command supports only basic LSB actions (start, stop, restart, "
-"try-restart, reload, force-reload, status). For other actions, please try to"
-" use systemctl."
+"try-restart, reload, force-reload, status). For other actions, please try to "
+"use systemctl."
msgstr ""
-"service 命令只支持基础 LSB 动作(即 start、stop、restart、try-restart、reload、force-"
-"reload、status)。其他动作请使用 systemctl。"
+"service 命令只支持基础 LSB 动作(即 start、stop、restart、try-restart、"
+"reload、force-reload、status)。其他动作请使用 systemctl。"
-#: ../sysconfig/network-scripts/ifup-ippp:376
-msgid "Warning: link doesn't support IPv6 using encapsulation 'rawip'"
-msgstr "警告:链接不支持使用封装“rawip”的 IPv6"
+#: ../etc/rc.d/init.d/functions:33
+msgid "Starting $prog (via systemctl): "
+msgstr "正在启动 $prog (via systemctl): "
-#: ../sys-unconfig:6
-msgid "Usage: sys-unconfig"
-msgstr "用法: sys-unconfig"
+#: ../etc/rc.d/init.d/functions:36
+msgid "Stopping $prog (via systemctl): "
+msgstr "正在停止$prog(透过 systemctl): "
-#: ../sysconfig/network-scripts/ifup-routes:6
-msgid "usage: ifup-routes <net-device> [<nickname>]"
-msgstr "用法: ifup-routes <net-device> [<nickname>]"
+#: ../etc/rc.d/init.d/functions:39
+msgid "Reloading $prog configuration (via systemctl): "
+msgstr "正在重载 $prog 配置(透过 systemctl): "
-#: ../sysconfig/network-scripts/network-functions-ipv6:570
-msgid "Missing parameter 'IPv4-tunnel address' (arg 2)"
-msgstr "缺少参数“IPv4 隧道地址” ( 参数2)"
+#: ../etc/rc.d/init.d/functions:42
+msgid "Restarting $prog (via systemctl): "
+msgstr "正在重启 $prog(通过 systemctl): "
-#: ../rc.d/init.d/netconsole:118
-msgid "Disabling netconsole"
-msgstr "正在禁用 netconsole"
+#: ../etc/rc.d/init.d/functions:52
+msgid "Reloading systemd: "
+msgstr "重新加载 systemd: "
-#: ../rc.d/init.d/network:221
-msgid "Shutting down loopback interface: "
-msgstr "正在关闭环回接口:"
+#: ../etc/rc.d/init.d/functions:236 ../etc/rc.d/init.d/functions:274
+msgid "$0: Usage: daemon [+/-nicelevel] {program}"
+msgstr "$0: 用法:daemon [+/-nicelevel] {program}"
-#: ../sysconfig/network-scripts/network-functions-ipv6:710
-msgid "Unsupported selection '$selection' specified (arg 2)"
-msgstr "不支持指定的 '$selection' 选项 (参数 2)"
+#: ../etc/rc.d/init.d/functions:304
+msgid "$base startup"
+msgstr "$base 启动"
-#: ../rc.d/init.d/functions:52
-msgid "Reloading systemd: "
-msgstr ""
+#: ../etc/rc.d/init.d/functions:314 ../etc/rc.d/init.d/functions:333
+msgid "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+msgstr "用法:killproc [-p pidfile] [ -d delay] {program} [-signal]"
-#: ../sysconfig/network-scripts/network-functions-ipv6:959
-msgid "No reason given for sending trigger to radvd"
-msgstr "未给出发送触发器给 radvd 的理由"
+#: ../etc/rc.d/init.d/functions:323 ../etc/rc.d/init.d/functions:450
+msgid "-b option can be used only with -p"
+msgstr "-b 选项只能和 -p 一起使用"
-#: ../sysconfig/network-scripts/ifup-eth:207
-#: ../sysconfig/network-scripts/ifup-eth:347
-msgid " done."
-msgstr " 完成。"
+#: ../etc/rc.d/init.d/functions:324
+msgid "Usage: killproc -p pidfile -b binary program"
+msgstr "用法:killproc -p pidfile -b binary program"
-#: ../sysconfig/network-scripts/network-functions-ipv6:56
-msgid "Missing parameter 'IPv6-network' (arg 1)"
-msgstr "缺少参数 'IPv6-network' (参数1)"
+#: ../etc/rc.d/init.d/functions:353 ../etc/rc.d/init.d/functions:363
+#: ../etc/rc.d/init.d/functions:378
+msgid "$base shutdown"
+msgstr "$base 关闭"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1005
-msgid "Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd"
-msgstr "给定的 pid 文件 '$pidfile' 不存在, 无法发送触发器给 radvd"
+#: ../etc/rc.d/init.d/functions:369
+msgid "$base $killlevel"
+msgstr "$base $killlevel"
-#: ../sysconfig/network-scripts/network-functions-ipv6:528
-msgid "Missing parameter 'local IPv4 address' (arg 2)"
-msgstr "缺少参数“本地 IPv4 地址”(参数2)"
+#: ../etc/rc.d/init.d/functions:396
+msgid "Usage: pidfileofproc {program}"
+msgstr "用法:pidfileofproc {program}"
-#: ../sysconfig/network-scripts/ifup-aliases:269
-msgid ""
-"Determining if ip address ${IPADDR} is already in use for device "
-"${parent_device}..."
-msgstr ""
+#: ../etc/rc.d/init.d/functions:411
+msgid "Usage: pidofproc [-p pidfile] {program}"
+msgstr "用法:pidofproc [-p pidfile] {program}"
-#: ../sysconfig/network-scripts/ifup-aliases:119
-msgid "Missing config file $PARENTCONFIG."
-msgstr "缺少配置文件 $PARENTCONFIG。"
+#: ../etc/rc.d/init.d/functions:437
+msgid "Usage: status [-p pidfile] {program}"
+msgstr "用法:status [-p pidfile] {program}"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1080
-msgid "Run 'ip -6 addr show dev ${device} scope global tentative' to see more"
-msgstr ""
+#: ../etc/rc.d/init.d/functions:451
+msgid "Usage: status -p pidfile -b binary program"
+msgstr "用法:status -p pidfile -b binary program"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1067
-msgid "Duplicate Address Detection: Please, fix your network configuration"
-msgstr ""
+#: ../etc/rc.d/init.d/functions:478 ../etc/rc.d/init.d/functions:484
+msgid "${base} (pid $pid) is running..."
+msgstr "${base} (pid $pid) 正在运行..."
-#: ../rc.d/init.d/functions:581 ../rc.d/init.d/functions:581
-msgid "$STRING"
-msgstr "$STRING"
+#: ../etc/rc.d/init.d/functions:488
+msgid "${base} dead but pid file exists"
+msgstr "${base} 已死,但 pid 文件存在"
-#: ../rc.d/init.d/functions:487
+#: ../etc/rc.d/init.d/functions:492
+msgid "${base} status unknown due to insufficient privileges."
+msgstr "由于权限不足,${base} 状态未知。"
+
+#: ../etc/rc.d/init.d/functions:501
msgid "${base} dead but subsys locked"
msgstr "${base} 已死,但是 subsys 被锁"
-#: ../sysconfig/network-scripts/ifup-aliases:177
-msgid "error in $FILE: already seen ipaddr $IPADDR in $ipseen"
-msgstr "$FILE 中出错:$ipseen 中有 IP 地址 $IPADDR "
+#: ../etc/rc.d/init.d/functions:504
+msgid "${base} is stopped"
+msgstr "已停止 ${base}"
-#: ../sysconfig/network-scripts/ifup-eth:265
-msgid ""
-"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
-msgstr ""
+#: ../etc/rc.d/init.d/functions:512
+msgid " OK "
+msgstr " 确定 "
-#: ../rc.d/init.d/functions:36
-msgid "Stopping $prog (via systemctl): "
-msgstr "正在停止$prog(透过 systemctl):"
+#: ../etc/rc.d/init.d/functions:523
+msgid "FAILED"
+msgstr "失败"
-#: ../sysconfig/network-scripts/ifup-eth:272
-msgid "Error adding address ${ipaddr[$idx]} for ${DEVICE}."
-msgstr "为 ${DEVICE} 添加地址 ${ipaddr[$idx]} 出错。"
+#: ../etc/rc.d/init.d/functions:534
+msgid "PASSED"
+msgstr "通过"
-#: ../rc.d/init.d/netconsole:99
-msgid "netconsole: can't resolve MAC address of $SYSLOGADDR"
-msgstr "netconsole:无法解析 $SYSLOGADDR 的 MAC 地址"
+#: ../etc/rc.d/init.d/functions:545
+msgid "WARNING"
+msgstr "警告"
-#: ../sysconfig/network-scripts/network-functions-ipv6:1014
-msgid "Pidfile '$pidfile' is empty, cannot send trigger to radvd"
-msgstr "pidfile '$pidfile' 无内容, 无法发送触发器给 radvd"
+#: ../etc/rc.d/init.d/functions:595
+msgid "$STRING"
+msgstr "$STRING"
-#: ../sysconfig/network-scripts/ifup-eth:234
-msgid "Failed to bring up ${DEVICE}."
-msgstr "启动 ${DEVICE} 失败。"
+#: ../etc/rc.d/init.d/network:52
+msgid ""
+"You are using 'network' service provided by 'network-scripts', which are now "
+"deprecated."
+msgstr "您正在使用由 ‘network-scripts’ 所提供的 ‘network’,这一服务现在不推荐使用。"
-#: ../sysconfig/network-scripts/ifup-ipv6:157
+#: ../etc/rc.d/init.d/network:54
msgid ""
-"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
-msgstr "无法启用 IPv6 私有方法 '$IPV6_PRIVACY' ,内核不支持"
+"It is advised to switch to 'NetworkManager' instead for network management."
+msgstr "建议切换到 ‘NetworkManager’ 作为网络管理的替代。"
-#: ../rc.d/init.d/network:146
+#: ../etc/rc.d/init.d/network:77
+msgid "Bringing up loopback interface: "
+msgstr "正在打开环回接口: "
+
+#: ../etc/rc.d/init.d/network:81
+msgid "No 802.1Q VLAN support available in kernel."
+msgstr "内核中没有 802.1Q VLAN 支持。"
+
+#: ../etc/rc.d/init.d/network:132 ../etc/rc.d/init.d/network:139
+msgid "Bringing up interface $i: "
+msgstr "正在打开接口 $i: "
+
+#: ../etc/rc.d/init.d/network:151
msgid "Legacy static-route support not available: /sbin/route not found"
msgstr "旧的静态路由支持不可用:未找到 /sbin/route"
-#: ../sysconfig/network-scripts/network-functions-ipv6:114
-msgid "Tunnel device 'sit0' enabling didn't work"
-msgstr "隧道设备 'sit0' 启动无效"
+#: ../etc/rc.d/init.d/network:178
+msgid ""
+"Target is not reachable, but timeout was already reached. Continuing anyway."
+msgstr "目标不可达,但已到超时时间。无论如何将继续。"
-#: ../sysconfig/network-scripts/ifup-ipv6:182
-msgid "Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
-msgstr "设备 'tun6to4'(来自 '$DEVICE')已在运行,请先关闭"
+#: ../etc/rc.d/init.d/network:189
+msgid "rootfs or /usr is on network filesystem, leaving network up"
+msgstr "rootfs 或者 /usr 在网络文件系统上,正在保持网络启用"
-#: ../sysconfig/network-scripts/network-functions-ipv6:847
-msgid ""
-"Given IPv6 default gateway '$address' has scope '$device_scope' defined, "
-"given default gateway device '$device' will be not used"
-msgstr ""
-"给定的 IPv6 默认网关 '$address' 具有已定义的范围 '$device_scope' , 给定的网关设备 '$device' 将不再使用"
+#: ../etc/rc.d/init.d/network:199
+msgid "system is shutting down, leaving interfaces up as requested"
+msgstr "系统正在关闭,按照请求保持接口启用"
-#: ../rc.d/init.d/netconsole:85
-msgid "Unable to resolve IP address specified in /etc/sysconfig/netconsole"
-msgstr ""
+#: ../etc/rc.d/init.d/network:249
+msgid "Shutting down interface $i: "
+msgstr "正在关闭接口 $i: "
-#: ../rc.d/init.d/functions:464 ../rc.d/init.d/functions:470
-msgid "${base} (pid $pid) is running..."
-msgstr "${base} (pid $pid) 正在运行..."
+#: ../etc/rc.d/init.d/network:255
+msgid "Shutting down loopback interface: "
+msgstr "正在关闭环回接口: "
-#: ../sysconfig/network-scripts/ifup:104
-msgid "No 802.1Q VLAN support available in kernel for device ${DEVICE}"
-msgstr "在内核中未提供对设备 ${DEVICE} 的 802.1Q VLAN 支持。"
+#: ../etc/rc.d/init.d/network:267
+msgid "Configured devices:"
+msgstr "已配置设备:"
-#: ../sysconfig/network-scripts/network-functions-ipv6:898
-msgid "Given IPv6 default device '$device' doesn't exist or isn't up"
-msgstr "指定的 IPv6 默认设备 '$device' 不存在或未启动"
+#: ../etc/rc.d/init.d/network:270
+msgid "Currently active devices:"
+msgstr "当前活跃设备:"
-#: ../sysconfig/network-scripts/ifup-ipv6:209
-msgid "Given IPv4 address '$ipv4addr' is not globally usable"
-msgstr "给定 IPv4 地址 '$ipv4addr' 不是全局通用的"
+#: ../etc/rc.d/init.d/network:280
+msgid "Usage: $0 {start|stop|status|restart|force-reload}"
+msgstr "用法:$0 {start|stop|status|restart|force-reload}"
-#: ../sysconfig/network-scripts/ifup-ipv6:300
-msgid "Error occurred while calculating the IPv6to4 prefix"
-msgstr "IPv6to4 前缀计算出错"
+#~ msgid "Server address not specified in /etc/sysconfig/netconsole"
+#~ msgstr "服务器地址未在 /etc/sysconfig/netconsole 中指定"
-#: ../rc.d/init.d/functions:42
-msgid "Restarting $prog (via systemctl): "
-msgstr "正在重启 $prog(通过 systemctl):"
+#~ msgid "Usage: $0 {start|stop|status|restart|condrestart}"
+#~ msgstr "用法:$0 {start|stop|status|restart|condrestart}"
+
+#~ msgid "netconsole module loaded"
+#~ msgstr "已载入 netconsole 模块"
+
+#~ msgid "Bridge support not available: brctl not found"
+#~ msgstr "网桥支持不可用:未找到 brctl"
+
+#~ msgid "Initializing netconsole"
+#~ msgstr "正在初始化 netconsole"
+
+#~ msgid "netconsole module not loaded"
+#~ msgstr "未加载 netconsole 模块"
+
+#~ msgid "Usage: sys-unconfig"
+#~ msgstr "用法: sys-unconfig"
+
+#~ msgid "Disabling netconsole"
+#~ msgstr "正在禁用 netconsole"
+
+#~ msgid "netconsole: can't resolve MAC address of $SYSLOGADDR"
+#~ msgstr "netconsole:无法解析 $SYSLOGADDR 的 MAC 地址"