aboutsummaryrefslogtreecommitdiffstats
path: root/rc.d/rc.sysinit
diff options
context:
space:
mode:
authorBill Nottingham <notting@redhat.com>2012-08-06 15:18:23 -0400
committerBill Nottingham <notting@redhat.com>2012-08-06 15:18:23 -0400
commitd85174edb7389f670705595804b48aee0278ed2f (patch)
tree0cba6c19ef0420ec21bb56c0fe962d13ee3bee4f /rc.d/rc.sysinit
parent164d1ede7161233a2a2fe6e4cf413b44a08923e4 (diff)
downloadinitscripts-d85174edb7389f670705595804b48aee0278ed2f.tar
initscripts-d85174edb7389f670705595804b48aee0278ed2f.tar.gz
initscripts-d85174edb7389f670705595804b48aee0278ed2f.tar.bz2
initscripts-d85174edb7389f670705595804b48aee0278ed2f.tar.xz
initscripts-d85174edb7389f670705595804b48aee0278ed2f.zip
Initial removal of support for non-systemd systems.
Diffstat (limited to 'rc.d/rc.sysinit')
-rwxr-xr-xrc.d/rc.sysinit666
1 files changed, 0 insertions, 666 deletions
diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
deleted file mode 100755
index 6363e4ca..00000000
--- a/rc.d/rc.sysinit
+++ /dev/null
@@ -1,666 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.d/rc.sysinit - run once at boot time
-#
-# Taken in part from Miquel van Smoorenburg's bcheckrc.
-#
-
-HOSTNAME=$(/bin/hostname)
-
-set -m
-
-if [ -f /etc/sysconfig/network ]; then
- . /etc/sysconfig/network
-fi
-if [ -r /etc/hostname ]; then
- HOSTNAME=$(cat /etc/hostname)
-fi
-if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
- HOSTNAME=localhost
-fi
-
-if [ ! -e /proc/mounts ]; then
- mount -n -t proc /proc /proc
- mount -n -t sysfs /sys /sys >/dev/null 2>&1
-fi
-if [ ! -d /proc/bus/usb ]; then
- modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-else
- mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-fi
-
-. /etc/init.d/functions
-
-PLYMOUTH=
-[ -x /bin/plymouth ] && PLYMOUTH=yes
-
-# Check SELinux status
-SELINUX_STATE=
-if [ -e "/sys/fs/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
- if [ -r "/sys/fs/selinux/enforce" ] ; then
- SELINUX_STATE=$(cat "/sys/fs/selinux/enforce")
- else
- # assume enforcing if you can't read it
- SELINUX_STATE=1
- fi
-fi
-
-if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then
- /sbin/restorecon -R /dev 2>/dev/null
-fi
-
-disable_selinux() {
- echo $"*** Warning -- SELinux is active"
- echo $"*** Disabling security enforcement for system recovery."
- echo $"*** Run 'setenforce 1' to reenable."
- echo "0" > "/sys/fs/selinux/enforce"
-}
-
-relabel_selinux() {
- # if /sbin/init is not labeled correctly this process is running in the
- # wrong context, so a reboot will be required after relabel
- AUTORELABEL=
- . /etc/selinux/config
- echo "0" > /sys/fs/selinux/enforce
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
- if [ "$AUTORELABEL" = "0" ]; then
- echo
- echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required. "
- echo $"*** /etc/selinux/config indicates you want to manually fix labeling"
- echo $"*** problems. Dropping you to a shell; the system will reboot"
- echo $"*** when you leave the shell."
- sulogin
-
- else
- echo
- echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required."
- echo $"*** Relabeling could take a very long time, depending on file"
- echo $"*** system size and speed of hard drives."
-
- /sbin/fixfiles -F restore > /dev/null 2>&1
- fi
- rm -f /.autorelabel
- echo $"Unmounting file systems"
- umount -a
- mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
- reboot -f
-}
-
-# Print a text banner.
-echo -en $"\t\tWelcome to "
-read -r system_release < /etc/system-release
-if [[ "$system_release" == *"Red Hat"* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
- echo -en "Red Hat"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Red Hat \(.*\) release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-elif [[ "$system_release" == *Fedora* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;34m"
- echo -en "Fedora"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Fedora \(.*\) \?release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-else
- PRODUCT=$(sed "s/ release.*//g" /etc/system-release)
- echo "$PRODUCT"
-fi
-
-# Only read this once.
-cmdline=$(cat /proc/cmdline)
-
-# Initialize hardware
-if [ -f /proc/sys/kernel/modprobe ]; then
- if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
- sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
- else
- # We used to set this to NULL, but that causes 'failed to exec' messages"
- sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
- fi
-fi
-
-touch /dev/.in_sysinit >/dev/null 2>&1
-
-# Set default affinity
-if [ -x /bin/taskset ]; then
- if strstr "$cmdline" default_affinity= ; then
- for arg in $cmdline ; do
- if [ "${arg##default_affinity=}" != "${arg}" ]; then
- /bin/taskset -p ${arg##default_affinity=} 1
- fi
- done
- fi
-fi
-
-nashpid=$(pidof nash 2>/dev/null)
-[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
-unset nashpid
-action $"Starting udev: " /sbin/udevd --daemon
-/sbin/udevadm trigger --type=subsystems --action=add
-/sbin/udevadm trigger --type=devices --action=add
-/sbin/udevadm settle
-
-# Load other user-defined modules
-for file in /etc/sysconfig/modules/*.modules ; do
- [ -x $file ] && $file
-done
-
-# Load modules (for backward compatibility with VARs)
-if [ -f /etc/rc.modules ]; then
- /etc/rc.modules
-fi
-
-mount -n /dev/pts >/dev/null 2>&1
-[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
-
-# Configure kernel parameters
-update_boot_stage RCkernelparam
-apply_sysctl
-
-# Set the hostname.
-update_boot_stage RChostname
-action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
-
-# Sync waiting for storage.
-{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
-
-# Device mapper & related initialization
-if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
- modprobe dm-mod >/dev/null 2>&1
-fi
-
-if [ -f /etc/crypttab ]; then
- init_crypto 0
-fi
-
-if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \
- [ -x /sbin/multipath ]; then
- modprobe dm-multipath > /dev/null 2>&1
- /sbin/multipath -v 0
- if [ -x /sbin/kpartx ]; then
- /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null
- fi
-fi
-
-if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
- modprobe dm-mirror >/dev/null 2>&1
- dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
- if [ "$?" = "0" ]; then
- for dmname in $dmraidsets; do
- if [[ "$dmname" == isw_* ]] && \
- ! strstr "$cmdline" noiswmd; then
- continue
- fi
- /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
- /sbin/kpartx -a -p p "/dev/mapper/$dmname"
- done
- fi
-fi
-
-# Start any MD RAID arrays that haven't been started yet
-[ -r /proc/mdstat ] && [ -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
-
-if [ -x /sbin/lvm ]; then
- action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --sysinit
-fi
-
-if [ -f /etc/crypttab ]; then
- init_crypto 0
-fi
-
-if strstr "$cmdline" fastboot || [ -f /fastboot ]; then
- fastboot=yes
-fi
-
-if [ -f /fsckoptions ]; then
- fsckoptions=$(cat /fsckoptions)
-fi
-
-if strstr "$cmdline" forcefsck || [ -f /forcefsck ]; then
- fsckoptions="-f $fsckoptions"
-elif [ -f /.autofsck ]; then
- [ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
- if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
- AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
- fi
- if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
- echo
- echo $"*** Warning -- the system did not shut down cleanly. "
- echo $"*** Dropping you to a shell; the system will continue"
- echo $"*** when you leave the shell."
- [ -n "$SELINUX_STATE" ] && echo "0" > /sys/fs/selinux/enforce
- sulogin
- [ -n "$SELINUX_STATE" ] && echo "1" > /sys/fs/selinux/enforce
- [ -n "$PLYMOUTH" ] && plymouth --show-splash
- fi
- fsckoptions="$AUTOFSCK_OPT $fsckoptions"
-fi
-
-if [ "$BOOTUP" = "color" ]; then
- fsckoptions="-C $fsckoptions"
-else
- fsckoptions="-V $fsckoptions"
-fi
-
-READONLY=
-if [ -f /etc/sysconfig/readonly-root ]; then
- . /etc/sysconfig/readonly-root
-fi
-if strstr "$cmdline" readonlyroot ; then
- READONLY=yes
- [ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
- [ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state
-fi
-if strstr "$cmdline" noreadonlyroot ; then
- READONLY=no
-fi
-
-if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
-
- mount_empty() {
- if [ -e "$1" ]; then
- echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- mount_dirs() {
- if [ -e "$1" ]; then
- mkdir -p "$RW_MOUNT$1"
- find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- mount_files() {
- if [ -e "$1" ]; then
- cp -a --parents "$1" "$RW_MOUNT"
- mount -n --bind "$RW_MOUNT$1" "$1"
- fi
- }
-
- # Common mount options for scratch space regardless of
- # type of backing store
- mountopts=
-
- # Scan partitions for local scratch storage
- rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
-
- # First try to mount scratch storage from /etc/fstab, then any
- # partition with the proper label. If either succeeds, be sure
- # to wipe the scratch storage clean. If both fail, then mount
- # scratch storage via tmpfs.
- if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
- rm -rf "$RW_MOUNT" > /dev/null 2>&1
- elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then
- rm -rf "$RW_MOUNT" > /dev/null 2>&1
- else
- mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT"
- fi
-
- for file in /etc/rwtab /etc/rwtab.d/* /run/initramfs/rwtab; do
- is_ignored_file "$file" && continue
- [ -f $file ] && cat $file | while read type path ; do
- case "$type" in
- empty)
- mount_empty $path
- ;;
- files)
- mount_files $path
- ;;
- dirs)
- mount_dirs $path
- ;;
- *)
- ;;
- esac
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- done
-
- # Use any state passed by initramfs
- [ -d /run/initramfs/state ] && cp -a /run/initramfs/state/* $RW_MOUNT
-
- # In theory there should be no more than one network interface active
- # this early in the boot process -- the one we're booting from.
- # Use the network address to set the hostname of the client. This
- # must be done even if we have local storage.
- ipaddr=
- if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
- ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }')
- for ip in $ipaddr ; do
- HOSTNAME=
- eval $(ipcalc -h $ip 2>/dev/null)
- [ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; }
- done
- fi
-
- # Clients with read-only root filesystems may be provided with a
- # place where they can place minimal amounts of persistent
- # state. SSH keys or puppet certificates for example.
- #
- # Ideally we'll use puppet to manage the state directory and to
- # create the bind mounts. However, until that's all ready this
- # is sufficient to build a working system.
-
- # First try to mount persistent data from /etc/fstab, then any
- # partition with the proper label, then fallback to NFS
- state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
- if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
- /bin/true
- elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1; then
- /bin/true
- elif [ ! -z "$CLIENTSTATE" ]; then
- # No local storage was found. Make a final attempt to find
- # state on an NFS server.
-
- mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
- fi
-
- if [ -w "$STATE_MOUNT" ]; then
-
- mount_state() {
- if [ -e "$1" ]; then
- [ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT"
- mount -n --bind "$STATE_MOUNT$1" "$1"
- fi
- }
-
- for file in /etc/statetab /etc/statetab.d/* ; do
- is_ignored_file "$file" && continue
- [ ! -f "$file" ] && continue
-
- if [ -f "$STATE_MOUNT/$file" ] ; then
- mount -n --bind "$STATE_MOUNT/$file" "$file"
- fi
-
- for path in $(grep -v "^#" "$file" 2>/dev/null); do
- mount_state "$path"
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- done
-
- if [ -f "$STATE_MOUNT/files" ] ; then
- for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do
- mount_state "$path"
- [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
- done
- fi
- fi
-fi
-
-if [[ " $fsckoptions" != *" -y"* ]]; then
- fsckoptions="-a $fsckoptions"
-fi
-
-_RUN_QUOTACHECK=0
-if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
- _RUN_QUOTACHECK=1
-fi
-if [ -z "$fastboot" -a "$READONLY" != "yes" ]; then
-
- STRING=$"Checking filesystems"
- echo $STRING
- fsck -T -t noopts=_netdev -A $fsckoptions
- rc=$?
-
- if [ "$rc" -eq "0" ]; then
- success "$STRING"
- echo
- elif [ "$rc" -eq "1" ]; then
- passed "$STRING"
- echo
- elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
- echo $"Unmounting file systems"
- umount -a
- mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
- reboot -f
- fi
-
- # A return of 4 or higher means there were serious problems.
- if [ $rc -gt 1 ]; then
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
- failure "$STRING"
- echo
- echo
- echo $"*** An error occurred during the file system check."
- echo $"*** Dropping you to a shell; the system will reboot"
- echo $"*** when you leave the shell."
-
- str=$"(Repair filesystem)"
- PS1="$str \# # "; export PS1
- [ "$SELINUX_STATE" = "1" ] && disable_selinux
- sulogin
-
- echo $"Unmounting file systems"
- umount -a
- mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
- reboot -f
- elif [ "$rc" -eq "1" ]; then
- _RUN_QUOTACHECK=1
- fi
-fi
-
-remount_needed() {
- local state oldifs
- [ "$READONLY" = "yes" ] && return 1
- state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts)
- oldifs=$IFS
- IFS=","
- for opt in $state ; do
- if [ "$opt" = "rw" ]; then
- IFS=$oldifs
- return 1
- fi
- done
- IFS=$oldifs
- return 0
-}
-
-# Remount the root filesystem read-write.
-update_boot_stage RCmountfs
-if remount_needed ; then
- action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
-fi
-
-# Clean up SELinux labels
-if [ -n "$SELINUX_STATE" ]; then
- restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
-fi
-
-# If relabeling, relabel mount points.
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
- if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
- restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
- fi
-fi
-
-if [ "$READONLY" != "yes" ] ; then
- # Clear mtab
- (> /etc/mtab) &> /dev/null
-
- # Remove stale backups
- rm -f /etc/mtab~ /etc/mtab~~
-
- # Enter mounted filesystems into /etc/mtab
- mount -f /
- mount -f /proc >/dev/null 2>&1
- mount -f /sys >/dev/null 2>&1
- mount -f /dev/pts >/dev/null 2>&1
- mount -f /dev/shm >/dev/null 2>&1
- mount -f /proc/bus/usb >/dev/null 2>&1
-fi
-
-# Mount all other filesystems (except for NFS and /proc, which is already
-# mounted). Contrary to standard usage,
-# filesystems are NOT unmounted in single user mode.
-# The 'no' applies to all listed filesystem types. See mount(8).
-if [ "$READONLY" != "yes" ] ; then
- action $"Mounting local filesystems: " mount -a -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-else
- action $"Mounting local filesystems: " mount -a -n -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-fi
-
-# Update quotas if necessary
-if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
- action $"Checking local filesystem quotas: " /sbin/quotacheck -anug
-fi
-
-if [ -x /sbin/quotaon ]; then
- action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
-fi
-
-# Check to see if a full relabel is needed
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
- if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
- relabel_selinux
- fi
-else
- if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then
- [ -f /.autorelabel ] || touch /.autorelabel
- fi
-fi
-
-# Initialize pseudo-random number generator
-if [ -f "/var/lib/random-seed" ]; then
- cat /var/lib/random-seed > /dev/urandom
-else
- [ "$READONLY" != "yes" ] && touch /var/lib/random-seed
-fi
-if [ "$READONLY" != "yes" ]; then
- chmod 600 /var/lib/random-seed
- dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-fi
-
-if [ -f /etc/crypttab ]; then
- init_crypto 1
-fi
-
-# Configure machine if necessary.
-if [ -f /.unconfigured ]; then
-
- if [ -x /bin/plymouth ]; then
- /bin/plymouth quit
- fi
-
- if [ -x /usr/bin/system-config-keyboard ]; then
- /usr/bin/system-config-keyboard
- fi
- if [ -x /usr/bin/passwd ]; then
- /usr/bin/passwd root
- fi
- if [ -x /usr/sbin/system-config-network-tui ]; then
- /usr/sbin/system-config-network-tui
- fi
- if [ -x /usr/sbin/timeconfig ]; then
- /usr/sbin/timeconfig
- fi
- if [ -x /usr/sbin/authconfig-tui ]; then
- /usr/sbin/authconfig-tui --nostart
- fi
- if [ -x /usr/sbin/ntsysv ]; then
- /usr/sbin/ntsysv --level 35
- fi
-
- # Reread in network configuration data.
- if [ -f /etc/sysconfig/network ]; then
- . /etc/sysconfig/network
-
- # Reset the hostname.
- action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
- fi
-
- rm -f /.unconfigured
-fi
-
-# Clean out /.
-rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
- /poweroff /.suspended &> /dev/null
-
-# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
-_NEED_XFILES=
-[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1
-
-# Clean up /var.
-rm -rf /var/lock/cvs/* /var/run/screen/*
-find /var/lock /var/run ! -type d -exec rm -f {} \;
-rm -f /var/lib/rpm/__db* &> /dev/null
-rm -f /var/gdm/.gdmfifo &> /dev/null
-
-# Clean up utmp/wtmp
-> /var/run/utmp
-touch /var/log/wtmp /var/log/btmp
-chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp
-chmod 0664 /var/run/utmp /var/log/wtmp
-chmod 0600 /var/log/btmp
-if [ -n "$_NEED_XFILES" ]; then
- > /var/run/utmpx
- touch /var/log/wtmpx
- chgrp utmp /var/run/utmpx /var/log/wtmpx
- chmod 0664 /var/run/utmpx /var/log/wtmpx
-fi
-[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* /var/log/btmp >/dev/null 2>&1
-
-# Clean up various /tmp bits
-[ -n "$SELINUX_STATE" ] && restorecon /tmp
-rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
-rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
- /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
- /tmp/scrollkeeper-* /tmp/ssh-* \
- /dev/.in_sysinit
-
-# Make ICE directory
-mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
-chown root:root /tmp/.ICE-unix
-[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
-
-# Start up swapping.
-update_boot_stage RCswap
-action $"Enabling /etc/fstab swaps: " swapon -a -e
-if [ "$AUTOSWAP" = "yes" ]; then
- curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
- swappartitions=$(blkid -t TYPE=swap -o device)
- if [ x"$swappartitions" != x ]; then
- for partition in $swappartitions ; do
- [ ! -e $partition ] && continue
- majmin=$(get_numeric_dev dec $partition)
- echo $curswap | grep -qw "$majmin" || action $"Enabling local swap partitions: " swapon $partition
- done
- fi
-fi
-
-# Set up binfmt_misc
-/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
-
-# Boot time profiles. Yes, this should be somewhere else.
-if strstr "$cmdline" netprofile= && [ -x /usr/sbin/system-config-network-cmd ]; then
- for arg in $cmdline ; do
- if [ "${arg##netprofile=}" != "${arg}" ]; then
- /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
- fi
- done
-fi
-
-# Now that we have all of our basic modules loaded and the kernel going,
-# let's dump the syslog ring somewhere so we can find it later
-[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
-dmesg -s 131072 > /var/log/dmesg
-
-# create the crash indicator flag to warn on crashes, offer fsck with timeout
-touch /.autofsck &> /dev/null
-
-if strstr "$cmdline" confirm ; then
- touch /var/run/confirm
-fi
-
-# Let rhgb know that we're leaving rc.sysinit
-if [ -x /bin/plymouth ]; then
- /bin/plymouth --sysinit
-fi
-