aboutsummaryrefslogtreecommitdiffstats
path: root/network-scripts/ifup-ipv6
diff options
context:
space:
mode:
authorDavid Kaspar [Dee'Kej] <dkaspar@redhat.com>2018-05-25 20:01:54 +0200
committerDee'Kej <deekej@linuxmail.org>2018-05-30 12:32:22 +0200
commita145ddda284570e57413e37f025c3657205e17d8 (patch)
treea371338da02e38d8745964f75239c8ee62cc459b /network-scripts/ifup-ipv6
parentdb1ca2fadd20d0a4fb5a0fe18adcd8c960db9cf3 (diff)
downloadinitscripts-a145ddda284570e57413e37f025c3657205e17d8.tar
initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.gz
initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.bz2
initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.xz
initscripts-a145ddda284570e57413e37f025c3657205e17d8.zip
Repository scheme updated to new layout
NOTE: This commit just moves files around, without actually fixing the Makefiles and specfile. See follow up commits which resolve this.
Diffstat (limited to 'network-scripts/ifup-ipv6')
-rwxr-xr-xnetwork-scripts/ifup-ipv6316
1 files changed, 316 insertions, 0 deletions
diff --git a/network-scripts/ifup-ipv6 b/network-scripts/ifup-ipv6
new file mode 100755
index 00000000..ecbe5b79
--- /dev/null
+++ b/network-scripts/ifup-ipv6
@@ -0,0 +1,316 @@
+#!/bin/bash
+#
+# ifup-ipv6
+#
+#
+# Taken from:
+# (P) & (C) 2000-2006 by Peter Bieringer <pb@bieringer.de>
+#
+# You will find more information on the initscripts-ipv6 homepage at
+# http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version: 2006-07-20
+#
+# Note: if called (like normally) by /etc/sysconfig/network-scripts/ifup
+# exit codes aren't handled by "ifup"
+#
+# Uses following information from "/etc/sysconfig/network":
+# IPV6_DEFAULTDEV=<device>: controls default route (optional)
+# IPV6_DEFAULTGW=<address>: controls default route (optional)
+#
+# Uses following information from "/etc/sysconfig/network-scripts/ifcfg-$1":
+# IPV6INIT=yes|no: controls IPv6 configuration for this interface
+# IPV6ADDR=<IPv6 address>[/<prefix length>]: specify primary static IPv6 address
+# IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
+# IPV6_ROUTER=yes|no: controls IPv6 autoconfiguration (no: multi-homed interface without routing)
+# IPV6_AUTOCONF=yes|no: controls IPv6 autoconfiguration
+# defaults:
+# IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes
+# IPV6FORWARDING=no: IPV6_AUTOCONF=yes
+# IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
+# IPV6_PRIVACY="rfc3041": control IPv6 privacy (optional)
+# This script only supports "rfc3041" (if kernel supports it)
+#
+# Optional for 6to4 tunneling (hardwired name of tunnel device is "tun6to4"):
+# IPV6TO4INIT=yes|no: controls 6to4 tunneling setup
+# IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay (default: 192.88.99.1)
+# IPV6TO4_MTU=<MTU for IPv6>: controls IPv6 MTU for the 6to4 link (optional, default is MTU of interface - 20)
+# IPV6TO4_IPV4ADDR=<IPv4 address>: overwrite local IPv4 address (optional)
+# IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces
+# Example: IPV6TO4_ROUTING="eth0-:f101::1/64 eth1-:f102::1/64"
+#
+# Optional for 6to4 tunneling to trigger radvd:
+# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering (optional)
+# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" (optional)
+# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
+#
+# Required version of radvd to use 6to4 prefix recalculation
+# 0.6.2p3 or newer supporting option "Base6to4Interface"
+# Required version of radvd to use dynamic ppp links
+# 0.7.0 + fixes or newer
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+REALDEVICE=${DEVICE%%:*}
+DEVICE=$REALDEVICE
+
+# Test whether IPv6 configuration is disabled for this interface
+is_false "$IPV6INIT" && exit 0
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# IPv6 test, module loaded, exit if system is not IPv6-ready
+ipv6_test || exit 1
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? != 0 -a $? != 11 ]; then
+ # device doesn't exist or other problem occurs
+ exit 1
+fi
+
+# Setup IPv6 address on specified interface
+if [ -n "$IPV6ADDR" ]; then
+ ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1
+fi
+
+# Get current global IPv6 forwarding
+ipv6_global_forwarding_current="$(/sbin/sysctl -e -n net.ipv6.conf.all.forwarding)"
+
+# Set some proc switches depending on defines
+if [ "$IPV6FORWARDING" = "yes" ]; then
+ # Global forwarding should be enabled
+
+ # Check, if global IPv6 forwarding was already set by global script
+ if [ $ipv6_global_forwarding_current -ne 1 ]; then
+ net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel"
+ net_log $"Please restart network with '/sbin/service network restart'"
+ fi
+
+ ipv6_local_forwarding=1
+ ipv6_local_auto=0
+ ipv6_local_accept_ra=0
+ if [ "$IPV6_ROUTER" = "no" ]; then
+ ipv6_local_forwarding=0
+ fi
+ if [ "$IPV6_AUTOCONF" = "yes" ]; then
+ ipv6_local_auto=1
+ ipv6_local_accept_ra=2
+ fi
+else
+ # Global forwarding should be disabled
+
+ # Check, if global IPv6 forwarding was already set by global script
+ if [ $ipv6_global_forwarding_current -ne 0 ]; then
+ net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel"
+ net_log $"Please restart network with '/sbin/service network restart'"
+ fi
+
+ ipv6_local_forwarding=0
+ ipv6_local_auto=1
+ ipv6_local_accept_ra=1
+ if [ "$IPV6_AUTOCONF" = "no" ]; then
+ ipv6_local_auto=0
+ if [ ! "$IPV6_FORCE_ACCEPT_RA" = "yes" ]; then
+ ipv6_local_accept_ra=0
+ fi
+ fi
+fi
+
+if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+ /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1
+ /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_accept_ra >/dev/null 2>&1
+ /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1
+ /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1
+fi
+
+# Set IPv6 MTU, if given
+if [ -n "$IPV6_MTU" ]; then
+ ipv6_set_mtu $DEVICE $IPV6_MTU
+fi
+
+# Setup additional IPv6 addresses from list, if given
+if [ -n "$IPV6ADDR_SECONDARIES" ]; then
+ for ipv6addr in $IPV6ADDR_SECONDARIES; do
+ ipv6_add_addr_on_device $DEVICE $ipv6addr
+ done
+fi
+
+# Enable IPv6 RFC3041 privacy extensions if desired
+if [ "$IPV6_PRIVACY" = "rfc3041" ]; then
+ if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+ /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
+ fi
+ fi
+fi
+
+# Setup default IPv6 route, check are done by function
+if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then
+ ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE"
+fi
+
+# Setup additional static IPv6 routes on specified interface, if given
+if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+ LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do
+ ipv6_add_route $args $DEVICE
+ done
+fi
+
+# Setup of 6to4, if configured
+if [ "$IPV6TO4INIT" = "yes" ]; then
+ valid6to4config="yes"
+
+ # Test device status of 6to4 tunnel
+ ipv6_test_device_status tun6to4
+ if [ $? = 0 ]; then
+ # device is already up
+ net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+ exit 1
+ fi
+
+ # Get IPv4 address for global 6to4 prefix calculation
+ if [ -n "$IPV6TO4_IPV4ADDR" ]; then
+ # Take special configured from config file (precedence 1)
+ ipv4addr="$IPV6TO4_IPV4ADDR"
+
+ # Get local IPv4 address from interface
+ ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+ if [ -z "$ipv4addrlocal" ]; then
+ # Take configured from config file
+ ipv4addrlocal="$IPADDR"
+ fi
+ else
+ # Get IPv4 address from interface first (has precedence 2)
+ ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+ if [ -z "$ipv4addr" ]; then
+ # Take configured from config file (precedence 3)
+ ipv4addr="$IPADDR"
+ fi
+ ipv4addrlocal="$ipv4addr"
+ fi
+
+ if [ -n "$ipv4addr" ]; then
+ if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then
+ net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info
+ valid6to4config="no"
+ fi
+ if [ -z "$IPV6TO4_RELAY" ]; then
+ IPV6TO4_RELAY="192.88.99.1"
+ fi
+
+ # Check/generate relay address
+ ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)"
+ if [ $? -ne 0 ]; then
+ valid6to4config="no"
+ fi
+ else
+ net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info
+ valid6to4config="no"
+ fi
+
+ # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid
+ if [ "$valid6to4config" = "yes" ]; then
+ # Get MTU of master device
+ ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\<mtu\>/ { print $5 }')"
+ if [ -n "$ipv4mtu" ]; then
+ # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header
+ tunnelmtu=$(($ipv4mtu-20))
+ fi
+
+ if [ -n "$IPV6TO4_MTU" ]; then
+ if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then
+ net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning
+ else
+ tunnelmtu=$IPV6TO4_MTU
+ fi
+ fi
+
+ ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1
+
+ # Add route to for compatible addresses (removed later again)
+ ipv6_add_route "::/96" "::" tun6to4
+
+ # Add default route, if device matches
+ if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then
+ if [ -n "$IPV6_DEFAULTGW" ]; then
+ net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning
+ fi
+ ipv6_set_default_route $ipv6to4_relay tun6to4
+ fi
+
+ # Add static routes
+ if [ -f /etc/sysconfig/static-routes-ipv6 ]; then
+ LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do
+ if [ -z "$network" ]; then
+ continue
+ fi
+ if [ -z "$gateway" ]; then
+ gateway="$ipv6to4_relay"
+ fi
+ ipv6_add_route $network $gateway tun6to4
+ done
+ fi
+
+ # Setup additional static IPv6 routes (newer config style)
+ if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then
+ sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do
+ if echo "$line" | LC_ALL=C grep -vq 'via'; then
+ # Add gateway if missing
+ line="$line via $ipv6to4_relay"
+ fi
+ /sbin/ip -6 route add $line
+ done
+ fi
+
+ # Cleanup autmatically generated autotunnel (not needed for 6to4)
+ /sbin/ip -6 route del ::/96 dev tun6to4
+ /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4
+
+ if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
+ # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning
+ if [ $ipv6_global_forwarding_current -ne 1 ]; then
+ net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning
+ fi
+
+ if [ -n "$IPV6TO4_ROUTING" ]; then
+ ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)"
+ if [ -n "$ipv6to4prefix" ]; then
+ # Add route to local networks
+ for devsuf in $IPV6TO4_ROUTING; do
+ dev="${devsuf%%-*}"
+ suf="$(echo $devsuf | awk -F- '{ print $2 }')"
+ ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf}
+ done
+ else
+ net_log $"Error occurred while calculating the IPv6to4 prefix"
+ fi
+ else
+ net_log $"radvd control enabled, but config is not complete"
+ fi
+
+ # Control running radvd
+ ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
+ fi
+ else
+ net_log $"6to4 configuration is not valid"
+ exit 1
+ fi
+fi
+
+#wait for all global IPv6 addresses to leave the "tentative" state
+ipv6_wait_tentative $DEVICE