diff options
Diffstat (limited to 'perl-install/network/netconnect.pm')
| -rw-r--r-- | perl-install/network/netconnect.pm | 364 |
1 files changed, 0 insertions, 364 deletions
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm deleted file mode 100644 index cdfd75425..000000000 --- a/perl-install/network/netconnect.pm +++ /dev/null @@ -1,364 +0,0 @@ -package network::netconnect; # $Id$ - -use strict; -use common; -use log; -use detect_devices; -use run_program; -use modules; -use any; -use mouse; -use network; -use network::tools; -use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog); - -my %conf; - -sub detect { - my ($auto_detect) = @_; - require network::isdn; - $auto_detect->{isdn} = network::isdn::isdn_detect_backend(); - $auto_detect->{isdn}{description} =~ s/.*\|//; - - modules::load_category('network/main|gigabit|usb'); - require network::ethernet; - $auto_detect->{lan} = { map { $_->[0] => $_->[1] } network::ethernet::conf_network_card_backend() }; - - require network::adsl; - $auto_detect->{adsl} = network::adsl::adsl_detect(); - - my ($modem, @pci_modems) = detect_devices::getModem(); - $modem->{device} and $auto_detect->{modem} = $modem->{device}; - @pci_modems and $auto_detect->{winmodem}{$_->{driver}} = $_->{description} foreach @pci_modems; -} - -sub init_globals { - my ($in, $prefix) = @_; - MDK::Common::Globals::init( - in => $in, - prefix => $prefix, - connect_file => "/etc/sysconfig/network-scripts/net_cnx_up", - disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down", - connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg"); -} - -sub main { - my ($prefix, $netcnx, $in, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_; - my $netc = $o_netc || {}; - my $mouse = $o_mouse || {}; - my $intf = $o_intf || {}; - my $first_time = $o_first_time || 0; - - init_globals($in, $prefix); - $netc->{minus_one} = 0; #When one configure an eth in dhcp without gateway - $::isStandalone and read_net_conf($prefix, $netcnx, $netc); - $netc->{NET_DEVICE} = $netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME - $netc->{NET_INTERFACE} = $netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME - network::network::read_all_conf($prefix, $netc, $intf); - - modules::mergein_conf("$prefix/etc/modules.conf"); - - my $direct_net_install; - if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) { - !$::expert && !$o_noauto || $in->ask_okcancel(N("Network Configuration"), - N("Because you are doing a network installation, your network is already configured. -Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection. -"), 1) and do { - $netcnx->{type} = 'lan'; - output_with_perm("$prefix$connect_file", 0755, - qq( -ifup eth0 -)); - output("$prefix$disconnect_file", 0755, - qq( -ifdown eth0 -)); - $direct_net_install = 1; - goto step_5; -}; - } - - $netc->{autodetection} = 1; - $netc->{autodetect} = {}; - - step_1: - $::Wizard_no_previous = 1; - my @profiles = get_profiles(); - eval { $in->ask_from_({ title => N("Network Configuration Wizard"), - messages => N("Welcome to The Network Configuration Wizard. - -We are about to configure your internet/network connection. -If you don't want to use the auto detection, deselect the checkbox. -"), - interactive_help_id => 'configureNetwork', - }, - [ - if_(@profiles > 1, { label => N("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }), - { text => N("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' }, - { text => N("Expert Mode"), val => \$::expert, type => 'bool' }, - ] - ) or goto step_5 }; $in->exit(0) if $@ =~ /wizcancel/; - undef $::Wizard_no_previous; - set_profile($netcnx); - if ($netc->{autodetection}) { - my $_w = $in->wait_message(N("Network Configuration Wizard"), N("Detecting devices...")); - detect($netc->{autodetect}); - } - - my %net_conf_callbacks = (adsl => sub { require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) }, - cable => sub { require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) }, - isdn => sub { require network::isdn; network::isdn::configure($netcnx, $netc, undef) }, - lan => sub { require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) }, - modem => sub { require network::modem; network::modem::configure($in, $netcnx, $mouse, $netc) }, - winmodem => sub { require network::modem; network::modem::winmodemConfigure($in, $netcnx, $mouse, $netc) }, - ); - - - $conf{$_} = values %{$netc->{autodetect}{$_}} ? 1 : 0 foreach 'lan'; - $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach qw(adsl cable modem winmodem); - $conf{isdn} = $netc->{autodetect}{isdn}{driver} ? 1 : 0; - step_2: - - my @l = ( - [ join('', N("Normal modem connection"), if_($conf{modem}, " - " . N("detected on port %s", $netc->{autodetect}{modem}))), \$conf{modem} ], - [ join('', N("Winmodem connection"), if_($conf{winmodem}, " - " . N("detected"))), \$conf{winmodem} ], - [ join('', N("ISDN connection"), if_($conf{isdn}, " - " . N("detected %s", $netc->{autodetect}{isdn}{description}))), \$conf{isdn} ], - [ join('', N("ADSL connection"), if_($conf{adsl}, " - " . N("detected"))), \$conf{adsl} ], - [ join('', N("Cable connection"), if_($conf{cable}, " - " . N("cable connection detected"))), \$conf{cable} ], - [ join('', N("LAN connection"), if_($conf{lan}, " - " . N("ethernet card(s) detected"))), \$conf{lan} ] - ); - eval { $in->ask_from_({ title => N("Network Configuration Wizard"), - messages => N("Choose the connection you want to configure"), - interactive_help_id => 'configureNetwork', - }, - [ map { { text => $_->[0], val => $_->[1], type => 'bool' } } @l ], - changed => sub { - return if !$netc->{autodetection}; - my $c = 0; - #- $conf{adsl} and $c++; - $conf{cable} and $c++; - my $a = keys(%{$netc->{autodetect}{lan}}); - 0 < $a && $a <= $c and $conf{lan} = undef; - } - ) or goto step_1; - load_conf($netcnx, $netc, $intf); - foreach my $type (keys %net_conf_callbacks) { - $conf{$type} and do { - #-PO here, "forward" is the standard gtk+ button for "next"; check what is displayed in your language - $in->ask_okcancel(N("Network Configuration Wizard"), N("We are now going to configure the %s connection.\n\n\nPress \"%s\" to continue.", translate($type), N("Next")), 1) or goto step_2; - &{$net_conf_callbacks{$type}} or goto step_2; - $netconnect::need_restart_network = 1 if $type =~ /lan|cable/; - } - } - }; - $in->exit(0) if $@ =~ /wizcancel/; - - step_2_1: - my $nb = keys %{$netc->{internet_cnx}}; - - if ($nb > 1) { - # BUG: remember to remove reference to profiles in mcc if we do not restore this feature - eval { $in->ask_from(N("Network Configuration Wizard"), - N("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n") . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center"), - [ { label => N("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ] } ] - ) or goto step_2 }; $in->exit(0) if $@ =~ /wizcancel/; - } elsif ($nb == 1) { - $netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0]; - } - - eval { $in->ask_yesorno(N("Network configuration"), N("Configuration is complete, do you want to apply settings ?"), 1) or goto step_2_2 } if !$::isInstall; - $in->exit(0) if $@ =~ /wizcancel/; - - member($netc->{internet_cnx_choice}, ('adsl', 'isdn')) and $netc->{at_boot} = $in->ask_yesorno(N("Network Configuration Wizard"), N("Do you want to start the connection at boot?")); - - if ($netc->{internet_cnx_choice}) { - write_cnx_script($netc); - $netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type}; - } else { - unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up"; - unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down"; - undef $netc->{NET_DEVICE}; - } - - my $success = 1; - network::network::configureNetwork2($in, $prefix, $netc, $intf); - my $network_configured = 1; - - step_2_2: - eval { if ($netconnect::need_restart_network && $::isStandalone && (!$::expert || $in->ask_yesorno(N("Network configuration"), - N("The network needs to be restarted. Do you want to restart it ?"), 1))) { - if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) { - $success = 0; - $in->ask_okcancel(N("Network Configuration"), - N("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0); - } - } - }; $in->exit(0) if $@ =~ /wizcancel/; - - write_initscript(); - $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and - $success = ask_connect_now($netc->{internet_cnx_choice}); - - step_3: - my $m = $success ? join('', N("Congratulations, the network and Internet configuration is finished. - -"), if_($::isStandalone && $in->isa('interactive::gtk'), -N("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))) : - N("Problems occured during configuration. -Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration."); - $::Wizard_no_previous = 1; - $::Wizard_finished = 1; - eval { $in->ask_okcancel(N("Network Configuration"), $m, 1) }; $in->exit(0) if $@ =~ /wizcancel/; - undef $::Wizard_no_previous; - undef $::Wizard_finished; - - step_5: - $network_configured or network::network::configureNetwork2($in, $prefix, $netc, $intf); - - my $connect_cmd; - if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) { - $connect_cmd = qq( -#!/bin/bash -if [ -n "\$DISPLAY" ]; then -if [ -e /usr/bin/kppp ]; then -/sbin/route del default -/usr/bin/kppp & -else -/usr/sbin/net_monitor --connect -fi -else -$connect_file -fi -); - } elsif ($netcnx->{type}) { - $connect_cmd = qq( -#!/bin/bash -if [ -n "\$DISPLAY" ]; then -/usr/sbin/net_monitor --connect -else -$connect_file -fi -); - } else { - $connect_cmd = qq( -#!/bin/bash -/usr/sbin/drakconnect -); - } - if ($direct_net_install) { - $connect_cmd = qq( -#!/bin/bash -if [ -n "\$DISPLAY" ]; then -/usr/sbin/net_monitor --connect -else -$connect_file -fi -); - } - output_with_perm("$prefix$connect_prog", 0755, $connect_cmd) if $connect_cmd; - $netcnx->{$_} = $netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE); - $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null"); - - if ($::isInstall && $::o->{security} >= 3) { - require network::drakfirewall; - network::drakfirewall::main($in, $::o->{security} <= 3); - } -} - -sub set_profile { - my ($netcnx) = @_; - system(qq(/sbin/set-netprofile "$netcnx->{PROFILE}")); - log::explanations(qq(Switching to "$netcnx->{PROFILE}" profile)); -} - -sub save_profile { - my ($netcnx) = @_; - system(qq(/sbin/save-netprofile "$netcnx->{PROFILE}")); - log::explanations(qq(Saving "$netcnx->{PROFILE}" profile)); -} - -sub del_profile { - my ($profile) = @_; - return if !$profile || $profile eq "default"; - rm_rf("$::prefix/etc/netprofile/profiles/$profile"); - log::explanations(qq(Deleting "$profile" profile)); -} - -sub add_profile { - my ($netcnx, $profile) = @_; - return if !$profile || $profile eq "default" || member($profile, get_profiles()); - system(qq(/sbin/clone-netprofile "$netcnx->{PROFILE}" "$profile")); - log::explanations(qq("Creating "$profile" profile)); -} - -sub get_profiles() { - map { if_(m!([^/]*)/$!, $1) } glob("$::prefix/etc/netprofile/profiles/*/"); -} - -sub load_conf { - my ($netcnx, $netc, $intf) = @_; - my $current = { getVarsFromSh("$prefix/etc/netprofile/current") }; - - $netcnx->{PROFILE} = $current->{PROFILE} || 'default'; - network::read_all_conf($prefix, $netc, $intf); -} - -sub get_net_device() { - my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up"; - my $network_file = "/etc/sysconfig/network"; - if (cat_("$prefix$connect_file") =~ /ifup/) { - if_(cat_($connect_file) =~ /^\s*ifup\s+(.*)/m, split(' ', $1)) - } elsif (cat_("$prefix$connect_file") =~ /network/) { - ${{ getVarsFromSh("$prefix$network_file") }}{GATEWAYDEV}; - } elsif (cat_("$prefix$connect_file") =~ /isdn/) { - "ippp+"; - } else { - "ppp+"; - }; -} - -sub read_net_conf { - my ($_prefix, $netcnx, $netc) = @_; - $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE'; - $netcnx->{$netcnx->{type}} ||= {}; -} - -sub start_internet { - my ($o) = @_; - init_globals($o, $o->{prefix}); - #- give a chance for module to be loaded using kernel-BOOT modules... - $::isStandalone or modules::load_category('network/main|gigabit|usb'); - run_program::rooted($prefix, $connect_file); -} - -sub stop_internet { - my ($o) = @_; - init_globals($o, $o->{prefix}); - run_program::rooted($prefix, $disconnect_file); -} - -my @connection_types = (N_("modem"), N_(" isdn"), N_(" adsl"), N_(" cable"), N_(" local network")); - -#--------------------------------------------- -# WONDERFULL pad -#--------------------------------------------- -1; - -=head1 network::netconnect::detect() - -=head2 example of usage - -use lib qw(/usr/lib/libDrakX); -use network::netconnect; -use Data::Dumper; - -use class_discard; - -local $in = class_discard->new; - -network::netconnect::init_globals($in); -my %i; -&network::netconnect::detect(\%i); -print Dumper(\%i),"\n"; - -=cut |