summaryrefslogtreecommitdiffstats
path: root/perl-install/install_steps_interactive.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/install_steps_interactive.pm')
-rw-r--r--perl-install/install_steps_interactive.pm1360
1 files changed, 0 insertions, 1360 deletions
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index fec3d6502..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1360 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $new_bootstrap $com_license);
-
-@ISA = qw(install_steps);
-
-$com_license = _("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse'
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license.
-Please read carefully and comply with such specific licenses before
-you use or redistribute the said components.
-Such licenses will in general prevent the transfer, duplication
-(except for backup purposes), redistribution, reverse engineering,
-de-assembly, de-compilation or modification of the component.
-Any breach of agreement will immediately terminate your rights under
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact
-directly the distributor or editor of the component.
-Transfer to third parties or copying of such components including the
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their
-respective authors and are protected by intellectual property and
-copyright laws applicable to software programs.
-");
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_interactive;
-use install_any;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use lang;
-use keyboard;
-use any;
-use fs;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep($$) {
- my ($o, $err) = @_;
- $o->ask_warn(_("Error"), [ _("An error occurred"), formatError($err) ]);
-}
-
-sub kill_action {
- my ($o) = @_;
- $o->kill;
-}
-
-sub charsetChanged {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
- my ($o) = @_;
-
- $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {})
- || return $o->ask_yesorno('', _("Do you really want to leave the installation?")) ? $o->exit : &selectLanguage;
- install_steps::selectLanguage($o);
-
- $o->charsetChanged;
-
- if ($o->isa('interactive_gtk')) {
- $o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you chose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo();
- } else {
- #- don't use _( ) for this, as it is never translated
- $o->ask_warn('', "The characters of your language can't be displayed in console,
-so the messages will be displayed in english during installation") if $ENV{LANGUAGE} eq 'C';
- }
-}
-
-sub acceptLicence {
- my ($o) = @_;
- return if $o->{useless_thing_accepted};
-
- $o->set_help('license');
- $o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX(
-_("Introduction
-
-The operating system and the different components available in the Mandrake Linux distribution
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not
-restricted to, the set of programs, methods, rules and documentation related to the operating
-system and the different components of the Mandrake Linux distribution.
-
-
-1. License Agreement
-
-Please read this document carefully. This document is a license agreement between you and
-MandrakeSoft S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly
-accept and fully agree to conform to the terms and conditions of this License.
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use
-the Software Products.
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply
-with the terms and conditions of this License is void and will terminate your rights under this
-License. Upon termination of the License, you must immediately destroy all copies of the
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the
-extent permitted by law.
-MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of
-business, interruption of business, financial loss, legal fees and penalties resulting from a court
-judgment, or any other consequential loss) arising out of the use or inability to use the Software
-Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be
-liable for any special, incidental, direct or indirect damages whatsoever (including without
-limitation damages for loss of business, interruption of business, financial loss, legal fees
-and penalties resulting from a court judgment, or any other consequential loss) arising out
-of the possession and use of software components or arising out of downloading software components
-from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities. Most
-of these components are governed under the terms and conditions of the GNU General Public
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use,
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms
-and conditions of the license agreement for each component before using any component. Any question
-on a component license should be addressed to the component author and not to MandrakeSoft.
-The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written
-by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are
-protected by intellectual property and copyright laws applicable to software programs.
-MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in
-parts, by all means and for all purposes.
-\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.
-
-
-5. Governing Laws
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this
-portion is excluded from this contract. You remain bound by the other applicable sections of the
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact MandrakeSoft S.A.
-")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" and return;
-
- $o->ask_yesorno('', _("Are you sure you refuse the licence?"), 1) and $o->exit;
-
- &acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
- my ($o, $clicked) = @_;
-
- my $l = keyboard::lang2keyboards(lang::langs($o->{langs}));
-
- #- good guess, don't ask
- return install_steps::selectKeyboard($o)
- if !$::expert && !$clicked && $l->[0][1] >= 90 && listlength(lang::langs($o->{langs})) == 1;
-
- my @best = map { $_->[0] } @$l;
- push @best, 'us_intl' if !member('us_intl', @best);
-
- my $format = sub { translate(keyboard::keyboard2text($_[0])) };
- my $other;
- my $ext_keyboard = $o->{keyboard};
- $o->ask_from_(
- { title => _("Keyboard"),
- messages => _("Please choose your keyboard layout."),
- advanced_messages => _("Here is the full list of keyboards available"),
- advanced_label => _("More"),
- callbacks => { changed => sub { $other = $_[0]==1 } },
- },
- [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format, sort => 1,
- list => [ @best ] }),
- { val => \$ext_keyboard, type => 'list', format => $format,
- list => [ difference2([ keyboard::keyboards ], \@best) ], advanced => @best > 1 }
- ]);
- delete $o->{keyboard_unsafe};
-
- $o->{keyboard} = $ext_keyboard if $other;
- install_steps::selectKeyboard($o);
-}
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
- my ($o, $verif, $l, $def, $l2, $def2) = @_;
- $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed');
-
- $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
- my ($o, $clicked) = @_;
-
- my %c = my @c = (
- if_(!$::corporate,
- _("Recommended") => "beginner",
- ),
- if_($o->{meta_class} ne 'desktop',
- _("Expert") => "expert",
- ),
- );
- %c = @c = (_("Expert") => "expert") if $::expert && !$clicked;
-
- $o->set_help('selectInstallClassCorpo') if $::corporate;
-
- my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" };
- my $installMode = $o->{isUpgrade} ? $o->{keepConfiguration} ? __("Upgrade packages only") : __("Upgrade") : __("Install");
-
- $installMode = $o->selectInstallClass1($verifInstallClass,
- first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"},
- [ __("Install"), __("Upgrade"), __("Upgrade packages only") ], $installMode);
-
- $o->{isUpgrade} = $installMode =~ /Upgrade/;
- $o->{keepConfiguration} = $installMode =~ /packages only/;
-
- install_steps::selectInstallClass($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
- my ($o, $force) = @_;
-
- $force ||= $o->{mouse}{unsafe} || $::expert;
-
- my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
- $o->{mouse} = mouse::fullname2mouse(
- $o->ask_from_treelist_('', _("Please choose the type of your mouse."),
- '|', [ mouse::fullnames ], $prev) || return) if $force;
-
- if ($force && $o->{mouse}{type} eq 'serial') {
- $o->set_help('selectSerialPort');
- $o->{mouse}{device} =
- $o->ask_from_listf(_("Mouse Port"),
- _("Please choose on which serial port your mouse is connected to."),
- \&mouse::serial_port2text,
- [ mouse::serial_ports ]) or return;
- }
- if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
- #- set a sane default F11/F12
- $o->{mouse}{button2_key} = 87;
- $o->{mouse}{button3_key} = 88;
- $o->ask_from('', _("Buttons emulation"),
- [
- { label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
- { label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
- ]) or return;
- }
-
- if ($o->{mouse}{device} eq "usbmouse") {
- any::load_category($o, 'bus/usb', !$::expert, 1, $o->{pcmcia});
- eval {
- devices::make("usbmouse");
- modules::load(qw(hid mousedev usbmouse));
- };
- }
-
- $o->SUPER::selectMouse;
- 1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
- my ($o, $clicked) = @_;
-
- if (!$::noauto && arch() =~ /i.86/) {
- if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) {
- my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards..."));
- my $results = modules::configure_pcmcia($o->{pcmcia});
- $w = undef;
- $results and $o->ask_warn('', $results);
- }
- }
- {
- my $w = $o->wait_message(_("IDE"), _("Configuring IDE"));
- modules::load_category('disk/cdrom');
- }
- any::load_category($o, 'disk/scsi|hardware_raid', !$::expert && !$clicked, 0, $o->{pcmcia});
-
- install_interactive::tellAboutProprietaryModules($o) if !$clicked;
-}
-
-sub ask_mntpoint_s {
- my ($o, $fstab) = @_;
- $o->set_help('ask_mntpoint_s');
-
- my @fstab = grep { isTrueFS($_) } @$fstab;
- @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
- @fstab = @$fstab if @fstab == 0;
- die _("No partition available") if @fstab == 0;
-
- {
- my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
- install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
- log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
- }
- if (@fstab == 1) {
- $fstab[0]{mntpoint} = '/';
- } else {
- $o->ask_from('',
- _("Choose the mount points"),
- [ map { { label => partition_table::description($_),
- val => \$_->{mntpoint},
- not_edit => 0,
- list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] }
- } grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return;
- }
- $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
- my ($o) = @_;
-
- my $warned;
- install_any::getHds($o, sub {
- my ($err) = @_;
- $warned = 1;
- if ($o->ask_yesorno(_("Error"),
-_("I can't read your partition table, it's too corrupted for me :(
-I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
-The other solution is to not allow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to loose all the partitions?
-", $err))) {
- 0;
- } else {
- $o->{partitioning}{readonly} = 1;
- 1;
- }
- }) or $warned or $o->ask_warn('',
-_("DiskDrake failed to read correctly the partition table.
-Continue at your own risk!"));
-
- if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^)
- if (defined $partition_table_mac::bootstrap_part) {
- #- don't do anything if we've got the bootstrap setup
- #- otherwise, go ahead and create one somewhere in the drive free space
- } else {
- if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) {
- my ($hd) = $partition_table_mac::freepart_device;
- log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start");
- $partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part;
- log::l("bootstrap now at $partition_table_mac::bootstrap_part");
- fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
- $new_bootstrap = 1;
- } else {
- $o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
- }
- }
- }
-
- if ($o->{isUpgrade}) {
- # either one root is defined (and all is ok), or we take the first one we find
- my $p = fsedit::get_root_($o->{fstab});
- if (!$p) {
- my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade");
- $p = $o->ask_from_listf(_("Root Partition"),
- _("What is the root partition (/) of your system?"),
- \&partition_table::description, \@l) or die "setstep exitInstall\n";
- }
- install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
- } elsif ($::expert && $o->isa('interactive_gtk')) {
- install_interactive::partition_with_diskdrake($o, $o->{all_hds});
- } else {
- install_interactive::partitionWizard($o);
- }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
- my ($o) = @_;
- $o->ask_warn('', _("You need to reboot for the partition table modifications to take place"));
-
- install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
- my ($o, $fstab) = @_;
-
- $o->SUPER::choosePartitionsToFormat($fstab);
-
- my @l = grep { !$_->{isMounted} && $_->{mntpoint} &&
- (!isSwap($_) || $::expert) &&
- (!isFat($_) || $_->{notFormatted} || $::expert) &&
- (!isOtherAvailableFS($_) || $::expert || $_->{toFormat})
- } @$fstab;
- $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
- return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l;
-
- #- keep it temporary until the guy has accepted
- $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
- $o->ask_from_(
- { messages => _("Choose the partitions you want to format"),
- advanced_messages => _("Check bad blocks?"),
- },
- [ map {
- my $e = $_;
- ({
- text => partition_table::description($e), type => 'bool',
- val => \$e->{toFormatTmp}
- }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), {
- text => partition_table::description($e), type => 'bool', advanced => 1,
- disabled => sub { !$e->{toFormatTmp} },
- val => \$e->{toFormatCheck}
- })) } @l ]
- ) or die 'already displayed';
- #- ok now we can really set toFormat
- foreach (@l) {
- $_->{toFormat} = delete $_->{toFormatTmp};
- $_->{isFormatted} = 0;
- }
-}
-
-
-sub formatMountPartitions {
- my ($o, $fstab) = @_;
- my $w;
- fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub {
- my ($part) = @_;
- $w ||= $o->wait_message('', _("Formatting partitions"));
- $w->set(isLoopback($part) ?
- _("Creating and formatting file %s", $part->{loopback_file}) :
- _("Formatting partition %s", $part->{device}));
- });
- die _("Not enough swap space to fulfill installation, please add some") if availableMemory < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Looking for available packages..."));
- $o->SUPER::setPackages;
-}
-#------------------------------------------------------------------------------
-sub selectPackagesToUpgrade {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Finding packages to upgrade..."));
- $o->SUPER::selectPackagesToUpgrade();
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
- my ($o, $packages, $compssUsers, $first_time) = @_;
-
- #- this is done at the very beginning to take into account
- #- selection of CD by user if using a cdrom.
- $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem;
-
- my $availableC = install_steps::choosePackages(@_);
- my $individual = $::expert;
-
- require pkgs;
-
- my $min_size = pkgs::selectedSize($packages);
- $min_size < $availableC or die _("Your system does not have enough space left for installation or upgrade (%d > %d)", $min_size, $availableC);
-
- my $min_mark = $::expert ? 3 : 4;
- my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration.
-
- my $b = pkgs::saveSelected($packages);
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0);
- my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
- my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0);
- my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
- pkgs::restoreSelected($b);
-
- $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate;
-
- ($o->{packages_}{ind}) =
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $availableC);
-
- $o->choosePackagesTree($packages) if $individual;
-
- install_any::warnAboutNaughtyServers($o);
-}
-
-sub chooseSizeToInstall {
- my ($o, $packages, $min, $def, $max, $availableC) = @_;
- min($def, $availableC * 0.7);
-}
-sub choosePackagesTree {
- my ($o, $packages, $limit_to_medium) = @_;
-
- $o->ask_many_from_list('', _("Choose the packages you want to install"),
- {
- list => [ grep { !$limit_to_medium || pkgs::packageMedium($packages, $_) == $limit_to_medium }
- map { pkgs::packageByName($packages, $_) }
- keys %{$packages->{names}} ],
- value => \&pkgs::packageFlagSelected,
- label => \&pkgs::packageName,
- sort => 1,
- });
-}
-sub loadSavePackagesOnFloppy {
- my ($o, $packages) = @_;
- my $choice = $o->ask_from_listf('',
-_("Please choose load or save package selection on floppy.
-The format is the same as auto_install generated floppies."),
- sub { $_[0]{text} },
- [ { text => _("Load from floppy"), code => sub {
- while (1) {
- my $w = $o->wait_message(_("Package selection"), _("Loading from floppy"));
- log::l("load package selection from floppy");
- my $O = eval { install_any::loadO({}, 'floppy') };
- if ($@) {
- $w = undef; #- close wait message.
- $o->ask_okcancel('', _("Insert a floppy containing package selection"))
- or return;
- } else {
- install_any::unselectMostPackages($o);
- foreach (@{$O->{default_packages} || []}) {
- my $pkg = pkgs::packageByName($packages, $_);
- pkgs::selectPackage($packages, $pkg) if $pkg;
- }
- return 1;
- }
- }
- } },
- { text => _("Save on floppy"), code => sub {
- log::l("save package selection to floppy");
- install_any::g_default_packages($o, 'quiet');
- } },
- { text => _("Cancel") },
- ]);
- $choice->{code} and $choice->{code}();
-}
-sub chooseGroups {
- my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_;
-
- my $b = pkgs::saveSelected($packages);
- install_any::unselectMostPackages($o);
- pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size);
- my $system_size = pkgs::selectedSize($packages);
- my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
- pkgs::restoreSelected($b);
- log::l("system_size: $system_size");
-
- my @groups = @{$o->{compssUsersSorted}};
- my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}};
- delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups;
-
- my $compute_size = sub {
- my %pkgs;
- my %flags = %stable_flags; @flags{@_} = ();
- my $total_size;
- A: while (my ($k, $size) = each %$sizes) {
- Or: foreach (split "\t", $k) {
- foreach (split "&&") {
- exists $flags{$_} or next Or;
- }
- $total_size += $size;
- $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
- next A;
- }
- }
- log::l("computed size $total_size");
- log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
- int $total_size;
- };
- my %val = map {
- $_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}}
- } @groups;
-
-# @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level)
- my ($all, $size);
- my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
- my $size_to_display = sub {
- my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups);
-
- #- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
- $size > $lsize and install_any::unselectMostPackages($o);
- $size = $lsize;
- _("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
- };
-
- while (1) {
- if ($available_size < 140) {
- # too small to choose anything. Defaulting to no group chosen
- $val{$_} = 0 foreach %val;
- last;
- }
-
- $o->reallyChooseGroups($size_to_display, $individual, \%val) or return;
- last if pkgs::correctSize($size / sqr(1024)) < $available_size;
-
- $o->ask_warn('', _("Selected size is larger than available space"));
- }
-
- $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val;
- $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } keys %val;
-
- log::l("compssUsersChoice: " . (!$val{$_} && "not ") . "selected [$_] as [$o->{compssUsers}{$_}{label}]") foreach keys %val;
-
- #- if no group have been chosen, ask for using base system only, or no X, or normal.
- unless ($o->{isUpgrade} || grep { $val{$_} } keys %val) {
- my $docs = !$o->{excludedocs};
- my $minimal = !grep { $_ } values %{$o->{compssUsersChoice}};
-
- $o->ask_from(_("Type of install"),
- _("You haven't selected any group of packages.
-Please choose the minimal installation you want:"),
- [
- { val => \$o->{compssUsersChoice}{X}, type => 'bool', text => _("With X"), disabled => sub { $minimal } },
- if_($::expert || $minimal,
- { val => \$docs, type => 'bool', text => _("With basic documentation (recommended!)"), disabled => sub { $minimal } },
- { val => \$minimal, type => 'bool', text => _("Truly minimal install (especially no urpmi)") },
- ),
- ],
- changed => sub { $o->{compssUsersChoice}{X} = $docs = 0 if $minimal },
- ) or return &chooseGroups;
-
- $o->{excludedocs} = !$docs || $minimal;
-
- #- reselect according to user selection.
- if ($minimal) {
- $o->{compssUsersChoice}{$_} = 0 foreach keys %{$o->{compssUsersChoice}};
- } else {
- my $X = $o->{compssUsersChoice}{X}; #- don't let setDefaultPackages modify this one
- install_any::setDefaultPackages($o, 'clean');
- $o->{compssUsersChoice}{X} = $X;
- }
- install_any::unselectMostPackages($o);
- }
- 1;
-}
-
-sub reallyChooseGroups {
- my ($o, $size_to_display, $individual, $val) = @_;
-
- my $size_text = &$size_to_display;
-
- my ($path, $all);
- $o->ask_from('', _("Package Group Selection"), [
- { val => \$size_text, type => 'label' }, {},
- (map {;
- my $old = $path;
- $path = $o->{compssUsers}{$_}{path};
- if_($old ne $path, { val => translate($path) }),
- {
- val => \$val->{$_},
- type => 'bool',
- disabled => sub { $all },
- text => translate($o->{compssUsers}{$_}{label}),
- help => translate($o->{compssUsers}{$_}{descr}),
- }
- } @{$o->{compssUsersSorted}}),
- if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }),
- if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
- ], changed => sub { $size_text = &$size_to_display }) or return;
-
- if ($all) {
- $val->{$_} = 1 foreach keys %$val;
- }
- 1;
-}
-
-sub chooseCD {
- my ($o, $packages) = @_;
- my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
- my @mediumsDescr = ();
- my %mediumsDescr = ();
-
- if (!common::usingRamdisk()) {
- #- mono-cd in case of no ramdisk
- foreach (@mediums) {
- pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next;
- undef $packages->{mediums}{$_}{selected};
- }
- log::l("low memory install, using single CD installation (as it is not ejectable)");
- return;
- }
-
- #- the boot medium is already selected.
- $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
- #- build mediumDescr according to mediums, this avoid asking multiple times
- #- all the medium grouped together on only one CD.
- foreach (@mediums) {
- my $descr = pkgs::mediumDescr($packages, $_);
- exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
- $mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
- }
-
- #- if no other medium available or a poor beginner, we are choosing for him!
- #- note first CD is always selected and should not be unselected!
- return if @mediumsDescr == () || !$::expert;
-
- $o->set_help('chooseCD');
- $o->ask_many_from_list('',
-_("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
- {
- list => \@mediumsDescr,
- label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) },
- val => sub { \$mediumsDescr{$_[0]} },
- }) or do {
- $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
- };
- $o->set_help('choosePackages');
-
- #- restore true selection of medium (which may have been grouped together)
- foreach (@mediums) {
- my $descr = pkgs::mediumDescr($packages, $_);
- $packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
- log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
- }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
- my ($o, $packages) = @_;
- my ($current, $total) = 0;
-
- my $w = $o->wait_message(_("Installing"), _("Preparing installation"));
-
- my $old = \&pkgs::installCallback;
- local *pkgs::installCallback = sub {
- my $m = shift;
- if ($m =~ /^Starting installation/) {
- $total = $_[1];
- } elsif ($m =~ /^Starting installing package/) {
- my $name = $_[0];
- $w->set(_("Installing package %s\n%d%%", $name, $total && 100 * $current / $total));
- $current += pkgs::packageSize(pkgs::packageByName($o->{packages}, $name));
- } else { unshift @_, $m; goto $old }
- };
-
- #- the modification is not local as the box should be living for other package installation.
- #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
- undef *install_any::changeMedium;
- *install_any::changeMedium = sub {
- my ($method, $medium) = @_;
-
- #- if not using a cdrom medium, always abort.
- $method eq 'cdrom' && !$::oem and do {
- my $name = pkgs::mediumDescr($o->{packages}, $medium);
- local $| = 1; print "\a";
- my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
- $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
- return $r;
- };
- };
- my $install_result;
- catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
- sub {
- if ($@ =~ /^error ordering package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- } elsif ($@ =~ /^error installing package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- }
- 0;
- };
- if ($pkgs::cancel_install) {
- $pkgs::cancel_install = 0;
- die "setstep choosePackages\n";
- }
- $install_result;
-}
-
-sub afterInstallPackages($) {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Post-install configuration"));
- $o->SUPER::afterInstallPackages($o);
-}
-
-sub copyKernelFromFloppy {
- my ($o) = @_;
- $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return;
- $o->SUPER::copyKernelFromFloppy();
-}
-
-sub updateModulesFromFloppy {
- my ($o) = @_;
- $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return;
- $o->SUPER::updateModulesFromFloppy();
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
- my ($o, $first_time, $noauto) = @_;
- require network::netconnect;
- network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf},
- $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto);
-}
-
-#-configureNetworkIntf moved to network
-
-#-configureNetworkNet moved to network
-#------------------------------------------------------------------------------
-#-pppConfig moved to any.pm
-#------------------------------------------------------------------------------
-sub installCrypto {
- my $license =
-_("You now have the opportunity to download encryption software.
-
-WARNING:
-
-Due to different general requirements applicable to these software and imposed
-by various jurisdictions, customer and/or end user of theses software should
-ensure that the laws of his/their jurisdiction allow him/them to download, stock
-and/or use these software.
-
-In addition customer and/or end user shall particularly be aware to not infringe
-the laws of his/their jurisdiction. Should customer and/or end user not
-respect the provision of these applicable laws, he/they will incure serious
-sanctions.
-
-In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
-for special, indirect or incidental damages whatsoever (including, but not
-limited to loss of profits, business interruption, loss of commercial data and
-other pecuniary losses, and eventual liabilities and indemnification to be paid
-pursuant to a court decision) arising out of use, possession, or the sole
-downloading of these software, to which customer and/or end user could
-eventually have access after having sign up the present agreement.
-
-
-For any queries relating to these agreement, please contact
-Mandrakesoft, Inc.
-2400 N. Lincoln Avenue Suite 243
-Altadena California 91001
-USA");
- goto &installUpdates; #- remove old code, keep this one ok though by transfering to installUpdates.
-}
-
-sub installUpdates {
- my ($o) = @_;
- my $u = $o->{updates} ||= {};
-
- $o->hasNetwork or return;
-
- is_empty_hash_ref($u) and $o->ask_yesorno('',
-formatAlaTeX(
-_("You now have the opportunity to download updated packages. These packages
-have been released after the distribution was released. They may
-contain security or bug fixes.
-
-To download these packages, you will need to have a working Internet
-connection.
-
-Do you want to install the updates ?"))) || return;
-
- #- bring all interface up for installing crypto packages.
- install_interactive::upNetwork($o);
-
- require crypto;
- eval {
- my @mirrors = do { my $w = $o->wait_message('',
- _("Contacting Mandrake Linux web site to get the list of available mirrors..."));
- crypto::mirrors() };
- #- if no mirror have been found, use current time zone and propose among available.
- $u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone});
- $u->{mirror} = $o->ask_from_treelistf('',
- _("Choose a mirror from which to get the packages"),
- '|',
- \&crypto::mirror2text,
- \@mirrors,
- $u->{mirror});
- };
- return if $@ || !$u->{mirror};
-
- my $update_medium = do {
- my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages..."));
- crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
- };
-
- if ($update_medium) {
- if ($o->choosePackagesTree($o->{packages}, $update_medium)) {
- $o->pkg_install;
- } else {
- #- make sure to not try to install the packages (which are automatically selected by getPackage above).
- #- this is possible by deselecting the medium (which can be re-selected above).
- delete $update_medium->{selected};
- }
- #- update urpmi even, because there is an hdlist available and everything is good,
- #- this will allow user to update the medium but update his machine later.
- $o->install_urpmi;
- }
-
- #- stop interface using ppp only. FIXME REALLY TOCHECK isdn (costly network) ?
- # FIXME damien install_interactive::downNetwork($o, 'pppOnly');
-}
-
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
- my ($o, $clicked) = @_;
-
- require timezone;
- $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone}) || return;
- $o->set_help('configureTimezoneGMT');
-
- my $ntp = to_bool($o->{timezone}{ntp});
- $o->ask_from('', '', [
- { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
- { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
- ]) or goto &configureTimezone
- if $::expert || $clicked;
- if ($ntp) {
- my @servers = split("\n", $timezone::ntp_servers);
-
- $o->ask_from('', '',
- [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ]
- ) or goto &configureTimezone;
- $o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/;
- } else {
- $o->{timezone}{ntp} = '';
- }
- install_steps::configureTimezone($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
- my ($o, $clicked) = @_;
- require services;
- $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked;
- install_steps::configureServices($o);
-}
-
-sub summary {
- my ($o, $first_time) = @_;
- require pkgs;
-
- if ($first_time) {
- #- auto-detection
- $o->configurePrinter(0) if !$::expert;
- install_any::preConfigureTimezone($o);
- }
- my $mouse_name;
- my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) };
- &$format_mouse;
-
- #- format printer description in a better way
- my $format_printers = sub {
- my $printer = $o->{printer};
- if (is_empty_hash_ref($printer->{configured})) {
- pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'cups')) and return _("Remote CUPS server");
- return _("No printer");
- }
- my $entry;
- foreach ($printer->{currentqueue},
- map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) {
- $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}";
- }
- return _("Remote CUPS server"); #- fall back in case of something wrong.
- };
-
- my @sound_cards = (arch() =~ /ppc/ ? \&modules::load_category : \&modules::probe_category)->('multimedia/sound');
-
- #- if no sound card are detected AND the user selected things needing a sound card,
- #- propose a special case for ISA cards
- my $isa_sound_card =
- !@sound_cards && ($o->{compssUsersChoice}{GAMES} || $o->{compssUsersChoice}{AUDIO}) &&
- sub {
- if ($o->ask_yesorno('', _("Do you have an ISA sound card?"))) {
- $o->do_pkgs->install('sndconfig');
- $o->ask_warn('', _("Run \"sndconfig\" after installation to configure your sound card"));
- } else {
- $o->ask_warn('', _("No sound card detected. Try \"harddrake\" after installation"));
- }
- };
-
- $o->ask_from_({
- messages => _("Summary"),
- cancel => '',
- }, [
-{ label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } },
-{ label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } },
-{ label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } },
-{ label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers },
- (map {
-{ label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } }
- } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()),
- (map {
-{ label => _("Sound card"), val => $_->{description} }
- } @sound_cards),
- if_($isa_sound_card, { label => _("Sound card"), clicked => $isa_sound_card }),
- (map {
-{ label => _("TV card"), val => $_->{description}, clicked => sub {
- require harddrake::bttv;
- harddrake::bttv::config($o);
-} } } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()),
-]);
- install_steps::configureTimezone($o); #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
- my ($o, $clicked) = @_;
- $::corporate && !$clicked and return;
-
- require printer;
- require printerdrake;
-
- #- try to determine if a question should be asked to the user or
- #- if he is autorized to configure multiple queues.
- my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o));
- $ask_multiple_printer-- or return;
-
- #- install packages needed for printer::getinfo()
- $::testing or $o->do_pkgs->install('foomatic');
-
- #- take default configuration, this include choosing the right system
- #- currently used by the system.
- my $printer = $o->{printer} ||= {};
- eval { add2hash($printer, printer::getinfo($o->{prefix})) };
-
- $printer->{PAPERSIZE} = (($o->{lang} =~ /^en_US/) ||
- ($o->{lang} =~ /^en_CA/) ||
- ($o->{lang} =~ /^fr_CA/)) ? 'Letter' : 'A4';
- printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
- my ($o, $clicked) = @_;
- my $sup = $o->{superuser} ||= {};
- my $auth = ($o->{authentication}{LDAP} && __("LDAP") ||
- $o->{authentication}{NIS} && __("NIS") ||
- __("Local files"));
- $sup->{password2} ||= $sup->{password} ||= "";
-
- return if $o->{security} < 1 && !$clicked;
-
- $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth"));
-
- $o->ask_from_(
- {
- title => _("Set root password"),
- messages => _("Set root password"),
- cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''),
- callbacks => {
- complete => sub {
- $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,0);
- length $sup->{password} < 2 * $o->{security}
- and $o->ask_warn('', _("This password is too short (it must be at least %d characters long)", 2 * $o->{security})), return (1,0);
- return 0
- } } }, [
-{ label => _("Password"), val => \$sup->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 },
- if_($::expert,
-{ label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate },
- ),
- ]) or return;
-
- if ($auth eq __("LDAP")) {
- $o->{authentication}{LDAP} ||= "localhost"; #- any better solution ?
- $o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME});
- $o->ask_from('',
- _("Authentication LDAP"),
- [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} },
- { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} },
- ]) or goto &setRootPassword;
- } else { $o->{authentication}{LDAP} = '' }
- if ($auth eq __("NIS")) {
- $o->{authentication}{NIS} ||= 'broadcast';
- $o->ask_from('',
- _("Authentication NIS"),
- [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) },
- { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 },
- ]) or goto &setRootPassword;
- } else { $o->{authentication}{NIS} = '' }
- install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
- my ($o, $clicked) = @_;
- $o->{users} ||= [];
-
- if ($o->{security} < 1) {
- push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' }
- if !member('mandrake', map { $_->{name} } @{$o->{users}});
- }
- if (($o->{security} >= 1 || $clicked)) {
- any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security});
- }
- any::get_autologin($o->{prefix}, $o);
- any::autologin($o->{prefix}, $o, $o);
-
- install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
- my ($o, $first_time, $noauto) = @_;
-
- return if !$noauto && $first_time && !$::expert;
-
- if (arch() =~ /sparc/) {
- #- as probing floppies is a bit more different on sparc, assume always /dev/fd0.
- $o->ask_okcancel('',
- _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-SILO on your system, or another operating system removes SILO, or SILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures.
-
-If you want to create a bootdisk for your system, insert a floppy in the first
-drive and press \"Ok\"."),
- $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
- my @l = detect_devices::floppies_dev();
- $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
- $o->{mkbootdisk} or return;
- } else {
- my @l = detect_devices::floppies_dev();
- my %l = (
- 'fd0' => _("First floppy drive"),
- 'fd1' => _("Second floppy drive"),
- 'Skip' => _("Skip"),
- );
-
- if ($first_time || @l == 1) {
- $o->ask_yesorno('', formatAlaTeX(
- _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?
-%s", isThisFs('xfs', fsedit::get_root($o->{fstab})) ? _("
-
-(WARNING! You're using XFS for your root partition,
-creating a bootdisk on a 1.44 Mb floppy will probably fail,
-because XFS needs a very large driver).") : '')),
- $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
- $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
- } else {
- @l or die _("Sorry, no floppy drive available");
-
- $o->ask_from_(
- {
- messages => _("Choose the floppy drive you want to use to make the bootdisk"),
- }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ]
- ) or return;
- }
- $o->ask_warn('', _("Insert a floppy in %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
- }
-
- my $w = $o->wait_message('', _("Creating bootdisk..."));
- install_steps::createBootdisk($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Preparing bootloader..."));
- $o->set_help('empty');
- $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
- my ($o, $more) = @_;
- if (arch() =~ /ppc/) {
- my $machtype = detect_devices::get_mac_generation();
- if ($machtype !~ /NewWorld/) {
- $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine"));
- log::l("OldWorld or Unknown Machine - no yaboot setup");
- return;
- }
- }
- if (arch() =~ /^alpha/) {
- $o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
- catch_cdie { $o->SUPER::setupBootloader } sub {
- $o->ask_yesorno('',
-_("Error installing aboot,
-try to force installation even if that destroys the first partition?"));
- };
- } else {
- any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
- {
- my $w = $o->wait_message('', _("Installing bootloader"));
- eval { $o->SUPER::setupBootloader };
- }
- if (my $err = $@) {
- $err =~ /failed$/ or die;
- $o->ask_warn('',
- [ _("Installation of bootloader failed. The following error occured:"),
- grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
- unlink "$o->{prefix}/tmp/.error";
- die "already displayed";
- } elsif (arch() =~ /ppc/) {
- my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev";
- chop($of_boot);
- unlink "$o->{prefix}/tmp/.error";
- $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader. If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
- }
- }
-}
-
-sub miscellaneous {
- my ($o, $clicked) = @_;
-
- if ($::expert) {
- any::choose_security_level($o, \$o->{security}, \$o->{libsafe}) or return;
- }
- install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
- my ($o, $clicked) = @_;
- $o->configureXBefore;
-
- #- strange, xfs must not be started twice...
- #- trying to stop and restart it does nothing good too...
- my $xfs_started if 0;
- run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started;
- $xfs_started = 1;
-
- require Xconfigurator;
- { local $::testing = 0; #- unset testing
- local $::auto = !$::expert && !$clicked;
-
- symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
- Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs,
- { allowFB => $o->{allowFB},
- allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
- });
- }
- $o->configureXAfter;
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
- my ($o, $replay) = @_;
-
- my $floppy = detect_devices::floppy();
-
- $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
- my $dev = devices::make($floppy);
- {
- my $w = $o->wait_message('', _("Creating auto install floppy..."));
- install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
- }
- common::sync(); #- if you shall remove the floppy right after the LED switches off
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
- my ($o, $alldone) = @_;
-
- return $o->{step} = '' unless $alldone || $o->ask_yesorno('',
-_("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
- install_steps::exitInstall($o);
-
- $o->exit unless $alldone;
-
- $o->ask_from_no_check(
- {
- messages => formatAlaTeX(
-_("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-
-For information on fixes which are available for this release of Mandrake Linux,
-consult the Errata available from:
-
-
-http://www.linux-mandrake.com/en/82errata.php3
-
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandrake Linux User's Guide.")),
- cancel => '',
- },
- [
- if_($::expert,
- { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub {
- my $t = $o->ask_from_list_('',
-_("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ __("Replay"), __("Automated") ]);
- $t and $o->generateAutoInstFloppy($t eq 'Replay');
- }, advanced => 1 },
- { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
- ),
- ]
- ) if $alldone && !$::g_auto_install;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-27 23:24:49 +0000