diff options
Diffstat (limited to 'mdk-stage1/doc/README')
| -rw-r--r-- | mdk-stage1/doc/README | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/mdk-stage1/doc/README b/mdk-stage1/doc/README deleted file mode 100644 index e6c0cb420..000000000 --- a/mdk-stage1/doc/README +++ /dev/null @@ -1,185 +0,0 @@ -------------------------------------------------------- -* Stage1 of the Mandrake Linux installation program * -------------------------------------------------------- - - -[ Author ] - - Guillaume Cottenceau (gc at mandrakesoft.com) - - -[ Copyright ] - - Copyright 2000, 2001, 2002 MandrakeSoft - - Partially inspired by Redhat stuff (install from 5.x and 7.x) copyright - Red Hat Software, and Debian stuff (boot-floppies) copyright by their - respective holders. - - -[ Licence ] - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - - *** WARNING! *** - - This General Public License does not permit incorporating any part - of this program as a library into proprietary programs. - - -[ Online ] - - http://people.mandrakesoft.com/~gc/html/stage1.html - - -[ Purpose ] - - This code will take the control of the computer after that Linux - kernel booted properly, and will try to run the main installer - (also known as "stage 2") from a series of different media - including harddrive, cdrom, and network. - - Use the source, Luke. - - - - - -=-=-- Okay, now, more details --=-=- - - - [ Installing Mandrake Linux ] - -Per default, just insert your Mandrake Linux Installation CD into your -CDROM tray, be sure your system BIOS is configured to boot on your CDROM, -and that's all. - -If you have multiple CDROM drives and the installer can't autodetect in -which CDROM drive is the disc, it may ask you to choose the correct drive, -between your CDROM drives. - -Also, if you want to install from an SCSI CDROM, the installer should -detect your SCSI adapter; if it fails you may have to select the right -driver and/or supply additional parameters. - - - [ Position of the problem ] - -The need for alternate installation methods come with more specific -hardware configuration and/or need for frequent updates of the Installer -software. - -All of these methods will require to use a special boot disk. The method -is to download it and then to copy it "physically" to a floppy with the -command: - -# dd if=<boot-disk> of=/dev/fd0 - -Our boot disks are called "cdrom.img", "network.img", etc. - - - [ Installation from CDROM ] - -The first situation you may encounter is an old BIOS which does not permit -you to boot from your CDROM drive. - -In that case, you'll need to use the "cdrom.img" image file. The steps are -the same as with CDROM boot, and everything should be automatic. - - - [ Installation from DISK ] - -If you like trying occasionnally our development version, the Cooker, one -of the easiest way is to grab a local copy of the Distribution on one of -your local hard drives, and to install from that location. - -At present time, you can install from IDE or SCSI drives, from Linux -(ext2), Windows (vfat) or Reiserfs partition. - -In that case, you'll need to use the "hd.img" image file. The dialogs will -ask you to choose the DISK drive to use to install from, then the -partition on which you copied the Distribution, then the location -(directory) in which you copied the Distribution. - - - [ Installation from NETWORK ] - -For convenience, you can also install from a NFS volume, from a FTP -server, or from a HTTP server. NFS installs are maybe the fastest -and most convenient possible, so if you need to do frequent and/or -multiple installs, you may like this option. - -In that case, you'll need to use the "network.img" image file. If you have -PCI network card(s), you'll probably have to only setup your network -options. If not, you'll have to choose the appropriate driver(s) and/or -optional parameters. Supported network configurations include static IP -allocation and DHCP automatic configuration. - - - [ Installation from PCMCIA ] - -If you want to perform an installation on your laptop that is not based on -local IDE CDROM or DISK, nor on built-in network card, but on PCMCIA -extension (probably a network adapter or CDROM drive), you'll need the -"pcmcia.img" image file. - -PCMCIA services should automatically start and be transparent to you. -Then, you'll follow the instructions according to your preferred -installation method. - - - [ Monitoring a stage1 session ] - -Linux supports virtual consoles. You can switch between them by issueing -Ctrl+Alt+Fx key, in which 'x' is the number of the console. Here's console -occupancy during stage1. - -(#1) The user-interface of the stage1 is on the first console. In case of -newt interaction, it's provided with a neat blue and black color scheme, -and nice widgets. In case of stdio interaction (cdrom and disk installs), -it's more basic but still usable :-). - -(#2) A shell is provided on second console in some cases (you need to -compile it with -DSPAWN_SHELL and you need to provide a valid shell in the -initrd) and of course it's not in, in image files of Mandrake Linux -releases because it's too much diskspace. - -(#3) The log is printed out on the third console. This is the location -where you can find most valuable information, prefixed by a '*'. See -"log.h" for calls that print things out to the log. - -(#4) The kernel messages are printed on the fourth console. There is a -process forked very early in the init (the program before the stage1) -which monitors /proc/kmsg for new kernel messages. Also, syslog stuff (the -logs commited by the programs) should appear on the /dev/log Unix socket, -this is also printed on this console. - -(#5) Former place for the stderr of insmod calls. It's not used anymore. - -(#6) Place where a trivial interactive communication with the stage1 is -set up if the parameter -DSPAWN_INTERACTIVE is compiled in. Basically, you -can set switches such as "expert" and "rescue" on the fly with this -feature. It's implemented with a fork and a Unix pipe. - - - [ Rescueing a system ] - -Since Mandrake Linux 7.1, we provide a rescue system through each of the -previously described methods. You don't need a special "rescue.img" file. -Just hit "F1" at boot time, type in "rescue", and follow the first steps -of the installation according to the method you chose (choose -disks/partitions for disk method, network parameters for network method, -etc). Then, you'll end up with a workable system, very useful to rescue a -damaged system, or do other basic actions. |