updated pot file

1 files changed, 373 insertions, 309 deletions

diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index 0558b865b..6c2abe867 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-no\n"
-"POT-Creation-Date: 2003-05-31 11:34+0200\n"
+"POT-Creation-Date: 2003-06-16 15:42+0200\n"
 "PO-Revision-Date: 2003-03-13 06:52+0100\n"
 "Last-Translator: Per Øyvind Karlsen <peroyvind@sintrax.net>\n"
 "Language-Team: Norwegian Bokmål <cooker-i18n@linux-mandrake.com>\n"
@@ -494,6 +494,13 @@ msgstr ""
 "Liste over korruptert data:\n"
 "\n"
 
+#: ../../fs.pm:1
+#, c-format
+msgid ""
+"Can only be mounted explicitly (i.e.,\n"
+"the -a option will not cause the file system to be mounted)."
+msgstr ""
+
 #: ../../network/modem.pm:1
 #, c-format
 msgid ""
@@ -1023,274 +1030,6 @@ msgstr ""
 msgid "Show only for the selected day"
 msgstr "Vis kun for den valgte dag"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
-"drakTermServ oversikt\n"
-"\t\t\t   \n"
-"        - Lag Etheroppstartsaktiverte oppstartsimagefiler:\n"
-"        \t\tFor å starte med en kjerne via etheroppstart, må en spesiell "
-"kjerne/initrd imagefil opprettes.\n"
-"        \t\tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare "
-"et grafisk grensesnitt\n"
-"        \t\tfor å hjelpe til med å håndtere/endre på disse imagefilene.\n"
-"\n"
-"        - Vedlikehold /etc/dhcpd.conf:\n"
-"        \t\tFor å starte klientene over nettverk, hver klient trenger en "
-"entré i dhcpd.conf, som gir ut en IP-adresse\n"
-"        \t\tog nettverksoppstart imagefiler til maskinen. drakTermServ "
-"hjelper til med å lage//fjerne disse entréene.\n"
-"\t\t\t\n"
-"        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre "
-"denriktige imagefilen. Du burde\n"
-"        \t\togså vurdere det når etherboot ser etter bildefilene, den "
-"forventer navn som\n"
-"        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tEn typisk dhcpd.conf strofe for å støtte diskløse klienter "
-"serslik ut:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tMens du kan bruke en brønn av IP-adresse, framfor å sette opp en "
-"spesifikoppsettsentré for\n"
-"\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
-"bruken\n"
-"\t\t\tav klientspesifike konfigurasjonsfiler som ClusterNFS tilbyr.\n"
-"\t\t\t\n"
-"\t\t\tMerk: \"#type\" entréen er bare brukt av drakTermServ.  Klienter "
-"kanenten være \"tynne\"\n"
-"\t\t\teller 'fete'.  Tynne klienter kjører mesteparten av programvaren via "
-"xdmcp, mens tykke klienter kjører mesteparten\n"
-"av programvaren på klientmaskinen. En spesiell inttab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ blir\n"
-"\t\t\tskrevet for tynne klienter. Systemkonfigurasjonsfilene xdm-config, "
-"kdmrc, og gdm.conf blir modifiserte\n"
-"\t\t\thvis tynne klienter blir brukt, for å aktivere xdmcp. Siden det er "
-"sikkerhetsproblematikkrundt bruken av xdmcp,\n"
-"\t\t\tså blir hosts.deny og hosts.allow endret for å begrense tilgangen til "
-"det lokale subnettet.\n"
-"\t\t\t\n"
-"\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller "
-"endretklienter.\n"
-"\t\t\t\n"
-"        - Vedlikehold /etc/exports:\n"
-"        \t\tClusternfs lar deg eksportere rot-filsystemet til diskløse "
-"klienter, drakTermServ\n"
-"        \t\tsetter opp de riktige entréene for å tillate anonym tilgang "
-"tilrot-filsystemet fra\n"
-"        \t\tdiskløse klienter.\n"
-"\n"
-"        \t\tEn typisk eksportering-entré for clusternfs er:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk.\n"
-"        \t\t\n"
-"        - Vedlikehold /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor at brukere skal kunne logge inn på systemet fra en "
-"diskløsklient, så må deres entré i\n"
-"        \t\t/etc/shadow kopieres inn i /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ hjelper til\n"
-"        \t\tved å legge til og slette brukere fra denne filen.\n"
-"\n"
-"        - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tGjennom clusternfs så kan hver diskløse klient ha deres "
-"egneunike konfigurasjonsfil\n"
-"        \t\tpå rot filsystemet på tjeneren. I fremtiden vil drakTermServ "
-"kunne hjelpe til med å lage disse\n"
-"        \t\tfilene.\n"
-"\n"
-"        - Per klient systemkonfigurasjonsfiler:\n"
-"        \t\tGhennomclusternfs så hver diskløse klient ha deres egne unike "
-"konfigurasjonsfiler\n"
-"        \t\tpå rot-filesystemet på tjeneren. I fremtiden vil drakTermServ "
-"kunne hjelpe til med å opprette disse filene\n"
-"        \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
-"sysconfig/keyboard på per klient\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ vil configure denne filen til å virke sammenmed "
-"imagefilene som blir opprettet av\n"
-"        \t\tmkinitrd-net, og entréene i /etc/dhcpd.conf, for å gi "
-"utnettverks oppstartsimagefilene til hver \n"
-"        \t\tdiskløse klient.\n"
-"\n"
-"        \t\tEn typisk tftp konfigurasjonsfil ser slik ut:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tForandringen her fra den vanlige installasjonen er forandringen "
-"av disable flagget til\n"
-"        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor mkinitrd-"
-"net\n"
-"        \t\tplassere sine imagefiler.\n"
-"\n"
-"        - Opprett etherboot disketter/CD'er:\n"
-"        \t\tDe diskløse klientmaskinene trenger enten ROM imagefiler på "
-"nettverkskortet, en oppstartsdiskket\n"
-"        \t\teller en CD for å initiere oppstartssekvensen.  drakTermServ vil "
-"hjelpe til med generere disse imagefilene,\n"
-"        \t\tbasert på nettverkskortet i klientmaskinen.\n"
-"        \t\t\n"
-"        \t\tEt basis eksempel på opprrettelse av en oppstartsdiskett for "
-"3Com 3c509 manuelt:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-
 #: ../../Xconfig/card.pm:1
 #, c-format
 msgid "512 kB"
@@ -1911,7 +1650,7 @@ msgstr ""
 msgid "Unable to start live upgrade !!!\n"
 msgstr "Kan ikke starte oppgradering !!!\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Name: "
 msgstr "Navn: "
@@ -2359,7 +2098,7 @@ msgstr "Ditt valg? (standard %s) "
 msgid "Trouble shooting"
 msgstr "Feilsøking"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
 msgid " / Region"
 msgstr "Reunion"
@@ -3472,6 +3211,11 @@ msgstr "Vær sikker på at det er media i %s"
 msgid "Enable multiple profiles"
 msgstr "Slå på multiprofiler"
 
+#: ../../fs.pm:1
+#, c-format
+msgid "Do not interpret character or block special devices on the file system."
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -5034,6 +4778,11 @@ msgstr "Sikkerhetskopi system"
 msgid "Test pages"
 msgstr "Testsider"
 
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Logical volume name "
+msgstr "Lokal måling"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -5914,6 +5663,17 @@ msgstr "gjennomsnitt"
 msgid "New printer name"
 msgstr "Nytt skrivernavn"
 
+#: ../../fs.pm:1
+#, c-format
+msgid ""
+"Allow an ordinary user to mount the file system. The\n"
+"name of the mounting user is written to mtab so that he can unmount the "
+"file\n"
+"system again. This option implies the options noexec, nosuid, and nodev\n"
+"(unless overridden by subsequent options, as in the option line\n"
+"user,exec,dev,suid )."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Equatorial Guinea"
@@ -8161,6 +7921,13 @@ msgstr ""
 msgid "Please test the mouse"
 msgstr "Vennligst test musen."
 
+#: ../../fs.pm:1
+#, c-format
+msgid ""
+"Do not update inode access times on this file system\n"
+"(e.g, for faster access on the news spool to speed up news servers)."
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Other Media"
@@ -8322,6 +8089,14 @@ msgstr ""
 "  Din rapport ble ikke sent.\n"
 "  Venligst konfigurer sendmail"
 
+#: ../../fs.pm:1
+#, c-format
+msgid ""
+"Do not allow set-user-identifier or set-group-identifier\n"
+"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
+"have suidperl(1) installed.)"
+msgstr ""
+
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
@@ -9170,6 +8945,11 @@ msgstr "Taiwan"
 msgid "Pakistan"
 msgstr "Pakistan"
 
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Importance: "
+msgstr "Viktighet: %s\n"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -9203,11 +8983,6 @@ msgstr "Navn tilbyder (f.eks. tilbyder.net)"
 
 #: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Versjon: %s\n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
 msgid ""
 "Your system is low on resources. You may have some problem installing\n"
 "Mandrake Linux. If that occurs, you can try a text install instead. For "
@@ -9375,6 +9150,14 @@ msgstr "Brukerquota for sikkerhetskopifiler."
 msgid "Configuring printer \"%s\"..."
 msgstr "Konfigurerer skriver \"%s\"..."
 
+#: ../../fs.pm:1
+#, c-format
+msgid ""
+"Do not allow execution of any binaries on the mounted\n"
+"file system. This option might be useful for a server that has file systems\n"
+"containing binaries for architectures other than its own."
+msgstr ""
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Internet connection"
@@ -9584,11 +9367,6 @@ msgstr "Bruk Expect for SSH"
 msgid "Poland"
 msgstr "Polen"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Viktighet: %s\n"
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Please check if you want to eject your tape after the backup."
@@ -9682,15 +9460,6 @@ msgstr "F00f feil"
 msgid "XFree %s"
 msgstr "XFree %s"
 
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Hvilken dhcp klient ønsker du å bruke?\n"
-"Standard er dhcp-client"
-
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Domain Name:"
@@ -12127,6 +11896,11 @@ msgstr ""
 "Størrelsesendreren for FAT greide ikke å håndtere din partisjon, \n"
 "følgende feil oppsto: %s"
 
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Size: "
+msgstr "Størrelse: %s"
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Which sector do you want to move it to?"
@@ -13525,11 +13299,6 @@ msgstr ""
 "ønske å svare \"Nei\" dersom maskinen skal fungere som tjener, eller\n"
 "hvis du ikke kunne konfigurere det grafiske grensesnittet."
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nå konfigurere din  %s tilkobling."
-
 #: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
 msgid "MandrakeExpert Corporate"
@@ -14158,11 +13927,6 @@ msgstr "Setter standardskriver..."
 msgid "Interface %s (using module %s)"
 msgstr "Grensesnitt %s (bruker modul %s)"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "Generating preview ..."
@@ -14870,10 +14634,9 @@ msgid "Choose the mount points"
 msgstr "Velg monteringspunktene"
 
 #: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
 #, c-format
 msgid "OK"
 msgstr "OK"
@@ -15011,6 +14774,11 @@ msgstr "Vennligst velg hvilken serieport musen din koblet til."
 msgid "Did it work properly?"
 msgstr "Virker det som det skal?"
 
+#: ../../fs.pm:1
+#, c-format
+msgid "Mount the file system read-only."
+msgstr ""
+
 #: ../../security/level.pm:1
 #, c-format
 msgid "Poor"
@@ -15997,6 +15765,11 @@ msgstr "Område:"
 msgid "(E)IDE/ATA controllers"
 msgstr "(E)IDE/ATA-kontrollere"
 
+#: ../../fs.pm:1
+#, c-format
+msgid "All I/O to the file system should be done synchronously."
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Printer Server"
@@ -16201,6 +15974,11 @@ msgstr ""
 "\n"
 "Fortsette likevel?"
 
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Version: "
+msgstr "Versjon: %s\n"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Server IP missing!"
@@ -17194,6 +16972,13 @@ msgstr ""
 "Start pakkefiltrering for Linux kjerne 2.2 serien for å sette\n"
 "opp en brannmur for å beskytte maskinen din fra nettverksangrep."
 
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
+msgstr ""
+"Hvilken dhcp klient ønsker du å bruke?\n"
+"Standard er dhcp-client"
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Tamil (ISCII-layout)"
@@ -17204,6 +16989,11 @@ msgstr "Tamilsk (ISCII-layout)"
 msgid "Mayotte"
 msgstr "Mayotte"
 
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "%d KB\n"
+msgstr "Størrelse: %d KB\n"
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Creating auto install floppy..."
@@ -18160,11 +17950,6 @@ msgstr ""
 "\n"
 "- Lagre til harddisk i filbane: %s\n"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Størrelse: %d KB\n"
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Remove fonts on your system"
@@ -18990,6 +18775,279 @@ msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"
 msgid "Get Windows Fonts"
 msgstr "Få tak i Windows skrifttyper"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images. To create the file \n"
+"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \t\tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
+"\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"\t\t\tsubnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a\n"
+"        \t\tper-client basis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ oversikt\n"
+"\t\t\t   \n"
+"        - Lag Etheroppstartsaktiverte oppstartsimagefiler:\n"
+"        \t\tFor å starte med en kjerne via etheroppstart, må en spesiell "
+"kjerne/initrd imagefil opprettes.\n"
+"        \t\tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare "
+"et grafisk grensesnitt\n"
+"        \t\tfor å hjelpe til med å håndtere/endre på disse imagefilene.\n"
+"\n"
+"        - Vedlikehold /etc/dhcpd.conf:\n"
+"        \t\tFor å starte klientene over nettverk, hver klient trenger en "
+"entré i dhcpd.conf, som gir ut en IP-adresse\n"
+"        \t\tog nettverksoppstart imagefiler til maskinen. drakTermServ "
+"hjelper til med å lage//fjerne disse entréene.\n"
+"\t\t\t\n"
+"        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre "
+"denriktige imagefilen. Du burde\n"
+"        \t\togså vurdere det når etherboot ser etter bildefilene, den "
+"forventer navn som\n"
+"        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tEn typisk dhcpd.conf strofe for å støtte diskløse klienter "
+"serslik ut:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tMens du kan bruke en brønn av IP-adresse, framfor å sette opp en "
+"spesifikoppsettsentré for\n"
+"\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
+"bruken\n"
+"\t\t\tav klientspesifike konfigurasjonsfiler som ClusterNFS tilbyr.\n"
+"\t\t\t\n"
+"\t\t\tMerk: \"#type\" entréen er bare brukt av drakTermServ.  Klienter "
+"kanenten være \"tynne\"\n"
+"\t\t\teller 'fete'.  Tynne klienter kjører mesteparten av programvaren via "
+"xdmcp, mens tykke klienter kjører mesteparten\n"
+"av programvaren på klientmaskinen. En spesiell inttab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ blir\n"
+"\t\t\tskrevet for tynne klienter. Systemkonfigurasjonsfilene xdm-config, "
+"kdmrc, og gdm.conf blir modifiserte\n"
+"\t\t\thvis tynne klienter blir brukt, for å aktivere xdmcp. Siden det er "
+"sikkerhetsproblematikkrundt bruken av xdmcp,\n"
+"\t\t\tså blir hosts.deny og hosts.allow endret for å begrense tilgangen til "
+"det lokale subnettet.\n"
+"\t\t\t\n"
+"\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller "
+"endretklienter.\n"
+"\t\t\t\n"
+"        - Vedlikehold /etc/exports:\n"
+"        \t\tClusternfs lar deg eksportere rot-filsystemet til diskløse "
+"klienter, drakTermServ\n"
+"        \t\tsetter opp de riktige entréene for å tillate anonym tilgang "
+"tilrot-filsystemet fra\n"
+"        \t\tdiskløse klienter.\n"
+"\n"
+"        \t\tEn typisk eksportering-entré for clusternfs er:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk.\n"
+"        \t\t\n"
+"        - Vedlikehold /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor at brukere skal kunne logge inn på systemet fra en "
+"diskløsklient, så må deres entré i\n"
+"        \t\t/etc/shadow kopieres inn i /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ hjelper til\n"
+"        \t\tved å legge til og slette brukere fra denne filen.\n"
+"\n"
+"        - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tGjennom clusternfs så kan hver diskløse klient ha deres "
+"egneunike konfigurasjonsfil\n"
+"        \t\tpå rot filsystemet på tjeneren. I fremtiden vil drakTermServ "
+"kunne hjelpe til med å lage disse\n"
+"        \t\tfilene.\n"
+"\n"
+"        - Per klient systemkonfigurasjonsfiler:\n"
+"        \t\tGhennomclusternfs så hver diskløse klient ha deres egne unike "
+"konfigurasjonsfiler\n"
+"        \t\tpå rot-filesystemet på tjeneren. I fremtiden vil drakTermServ "
+"kunne hjelpe til med å opprette disse filene\n"
+"        \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
+"sysconfig/keyboard på per klient\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ vil configure denne filen til å virke sammenmed "
+"imagefilene som blir opprettet av\n"
+"        \t\tmkinitrd-net, og entréene i /etc/dhcpd.conf, for å gi "
+"utnettverks oppstartsimagefilene til hver \n"
+"        \t\tdiskløse klient.\n"
+"\n"
+"        \t\tEn typisk tftp konfigurasjonsfil ser slik ut:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tForandringen her fra den vanlige installasjonen er forandringen "
+"av disable flagget til\n"
+"        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor mkinitrd-"
+"net\n"
+"        \t\tplassere sine imagefiler.\n"
+"\n"
+"        - Opprett etherboot disketter/CD'er:\n"
+"        \t\tDe diskløse klientmaskinene trenger enten ROM imagefiler på "
+"nettverkskortet, en oppstartsdiskket\n"
+"        \t\teller en CD for å initiere oppstartssekvensen.  drakTermServ vil "
+"hjelpe til med generere disse imagefilene,\n"
+"        \t\tbasert på nettverkskortet i klientmaskinen.\n"
+"        \t\t\n"
+"        \t\tEt basis eksempel på opprrettelse av en oppstartsdiskett for "
+"3Com 3c509 manuelt:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+
 #: ../../mouse.pm:1
 #, c-format
 msgid "Mouse Systems"
@@ -19941,6 +19999,12 @@ msgid "Set of tools to read and send mail and news and to browse the Web"
 msgstr ""
 "Sett med verktøy for å lese og sende e-post og nyheter for åsurfe på nett"
 
+#~ msgid "We are now going to configure the %s connection."
+#~ msgstr "Vi skal nå konfigurere din  %s tilkobling."
+
+#~ msgid "Name: %s\n"
+#~ msgstr "Navn: %s\n"
+
 #~ msgid ""
 #~ "Which ISDN configuration do you prefer?\n"
 #~ "\n"