This commit was manufactured by cvs2svn to create tag 'V1_1_8_1mdk'.V1_1_8_1mdk

1 files changed, 0 insertions, 1073 deletions

diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index df290424d..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1073 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table_raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
-'ask' => "Ask at boot",
-'normal' => "Normal",
-'0x0f01' => "80x50",
-'0x0f02' => "80x43",
-'0x0f03' => "80x28",
-'0x0f05' => "80x30",
-'0x0f06' => "80x34",
-'0x0f07' => "80x60",
-'0x0122' => "100x30",
- 785 => "640x480 in 16 bits (FrameBuffer only)",
- 788 => "800x600 in 16 bits (FrameBuffer only)",
- 791 => "1024x768 in 16 bits (FrameBuffer only)",
- 794 => "1280x1024 in 16 bits (FrameBuffer only)",
-);
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
-    my ($kernel, $bootloader) = @_;
-    $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-sub get_label {
-    my ($label, $bootloader) = @_;
-    $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-
-sub mkinitrd($$$) {
-    my ($prefix, $kernelVersion, $initrdImage) = @_;
-
-    $::oem or $::testing || -e "$prefix/$initrdImage" and return;
-
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    modules::load('loop');
-    run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
-
-    loopback::save_boot($loop_boot);
-
-    -e "$prefix/$initrdImage" or die "mkinitrd failed";
-}
-
-sub mkbootdisk($$$;$) {
-    my ($prefix, $kernelVersion, $dev, $append) = @_;
-
-    modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop');
-    my @l = qw(mkbootdisk --noprompt); 
-    push @l, "--appendargs", $append if $append;
-    eval { modules::load('vfat') };
-    run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
-}
-
-sub read($$) {
-    my ($prefix, $file) = @_;
-    my $global = 1;
-    my ($e, $v, $f);
-    my %b;
-    foreach (cat_("$prefix$file")) {
-	($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
-	if (/^(image|other)$/) {
-	    if (arch() =~ /ppc/) {
-		$v =~ s/hd:\d+,//g;
-	    }   
-	    push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
-	    $global = 0;
-	} elsif ($global) {
-	    if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
-		$b{bios}{$1} = $2;
-	    } elsif ($_ eq 'bios') {
-		$b{bios}{$b{disk}} = $v;
-	    } elsif ($_ eq 'init-message') {
-		$v =~ s/\\n//g; 
-		$v =~ s/"//g;
-		$b{'init-message'} = $v;
-	    } else {
-		$b{$_} = $v || 1;
-	    }
-	} else {
-	    if ((/map-drive/ .. /to/) && /to/) {
-		$e->{mapdrive}{$e->{'map-drive'}} = $v;
-	    } else {
-		if (arch() =~ /ppc/) {
-		    $v =~ s/hd:\d+,//g;
-		    $v =~ s/"//g;
-		}
-		$e->{$_} = $v || 1;
-	    }
-	}
-    }
-    if (arch() !~ /ppc/) {
-	delete $b{timeout} unless $b{prompt};
-	$_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
-	$b{timeout} = $b{timeout} / 10 if $b{timeout};
-	$b{message} = cat_("$prefix$b{message}") if $b{message};
-    }
-    \%b;
-}
-
-sub suggest_onmbr {
-    my ($hds) = @_;
-    
-    my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
-    !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
-    my ($a, $b) = @_;
-    my %entries;
-
-    @entries{keys %$a, keys %$b} = ();
-    $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
-    scalar keys %entries;
-}
-
-sub add_entry($$) {
-    my ($entries, $v) = @_;
-    my (%usedold, $freeold);
-
-    do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
-    foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
-    foreach (@$entries) {
-	if ($_->{label} eq $v->{label}) {
-	    compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
-	    $_->{label} = "old${freeold}_$_->{label}";
-	}
-    }
-    push @$entries, $v;
-}
-
-sub add_kernel {
-    my ($prefix, $lilo, $version, $ext, $root, $v) = @_;
-
-    #- new versions of yaboot don't handle symlinks
-    my $ppcext = $ext;
-    if (arch() =~ /ppc/) {
-	$ext = "-$version";
-    }
-
-    log::l("adding vmlinuz$ext as vmlinuz-$version");
-    -e "$prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $prefix/boot/vmlinuz-$version"), return;
-    my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
-				   symlinkf("vmlinuz-$version", "$prefix/boot/vmlinuz$ext") ? $ext : "-$version");
-    my $initrd = eval { 
-	mkinitrd($prefix, $version, "/boot/initrd-$version.img");
-	"/boot/initrd" . ($ext ne "-$version" &&
-			  symlinkf("initrd-$version.img", "$prefix/boot/initrd$ext.img") ? $ext : "-$version") . ".img";
-    };
-    my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
-
-    #- more yaboot concessions - PPC
-    if (arch() =~ /ppc/) {
-	$label = $ppcext =~ /-(default)/ ? $1 : "linux$ppcext";
-    }
-
-    add2hash($v,
-	     {
-	      type => 'image',
-	      root => "/dev/$root",
-	      label => $label,
-	      kernel_or_dev => $image,
-	      initrd => $initrd,
-	      append => $lilo->{perImageAppend},
-	     });
-    add_entry($lilo->{entries}, $v);
-    $v;
-}
-
-sub unpack_append {
-    my ($s) = @_;
-    my @l = split(' ', $s);
-    [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
-    my ($simple, $dict) = @_;
-    join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append {
-    my ($b, $key) = @_;
-    my (undef, $dict) = unpack_append($b->{perImageAppend});
-    my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
-    #- suppose we want the memsize
-    @l = grep { append__mem_is_memsize($_) } @l if $key eq 'mem';
-
-    log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
-    $l[0];
-}
-sub add_append {
-    my ($b, $key, $val) = @_;
-
-    foreach (\$b->{perImageAppend}, map { \$_->{append} } grep { $_->{type} eq 'image' } @{$b->{entries}}) {
-	my ($simple, $dict) = unpack_append($$_);
-	@$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict;
-	push @$dict, [ $key, $val ] if $val;
-	$$_ = pack_append($simple, $dict);
-	log::l("add_append: $$_");
-    }
-}
-sub may_append {
-    my ($b, $key, $val) = @_;
-    add_append($b, $key, $val) if !get_append($b, $key);
-}
-
-sub configure_entry($$) {
-    my ($prefix, $entry) = @_;
-    if ($entry->{type} eq 'image') {
-	my $specific_version;
-	$entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
-	readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
-	if ($specific_version) {
-	    $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
-	    if (! -e "$prefix/$entry->{initrd}" || $::oem) {
-		eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
-		undef $entry->{initrd} if $@;
-	    }
-	}
-    }
-    $entry;
-}
-
-sub dev2prompath { #- SPARC only
-    my ($dev) = @_;
-    my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
-    require c;
-    $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
-    $dev;
-}
-
-sub get_kernels_and_labels {
-    my ($prefix) = @_;
-    my $dir = "$prefix/boot";
-    my @l = grep { /^vmlinuz-/ } all($dir);
-    my @kernels = grep { ! -l "$dir/$_" } @l;
-
-    my @preferred = ('', 'secure', 'enterprise', 'smp');
-    my %weights = map_index { $_ => $::i } @preferred;
-    
-    require pkgs;
-    @kernels = 
-      sort { pkgs::versionCompare($b->[1], $a->[1]) || $weights{$a->[2]} <=> $weights{$b->[2]} } 
-      map {
-	  if (my ($version, $ext) = /vmlinuz-((?:[\-.\d]*(?:mdk)?)*)(.*)/) {
-	      [ "$version$ext", $version, $ext ];
-	  } else {
-	      log::l("non recognised kernel name $_");
-	      ();
-	  }
-      } @kernels;
-
-    my %majors;
-    foreach (@kernels) {
-	push @{$majors{$1}}, $_ if $_->[1] =~ /^(2\.\d+)/
-    }
-    while (my ($major, $l) = each %majors) {
-	$l->[0][1] = $major if @$l == 1;
-    }
-
-    my %labels;
-    foreach (@kernels) {
-	my ($complete_version, $version, $ext) = @$_;
-	my $label = '';
-	if (exists $labels{$label}) {
-	    $label = "-$ext";
-	    if (!$ext || $labels{$label}) {
-		$label = "-$version$ext";
-	    }
-	}
-	$labels{$label} = $complete_version;
-    }
-    %labels;
-}
-
-sub suggest {
-    my ($prefix, $lilo, $hds, $fstab, $vga_fb, $quiet) = @_;
-    my $root_part = fsedit::get_root($fstab);
-    my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my $partition = first($boot =~ /\D*(\d*)/);
-    #- PPC xfs module requires enlarged initrd
-    my $xfsroot = isThisFs("xfs", $root_part);
-
-    require c; c::initSilo() if arch() =~ /sparc/;
-
-    my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
-    add2hash_($lilo, arch() =~ /sparc/ ?
-	{
-	 entries => [],
-	 timeout => 10,
-	 use_partition => 0, #- we should almost always have a whole disk partition.
-	 root          => "/dev/$root",
-	 partition     => $partition || 1,
-	 boot          => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
-	} : arch() =~ /ppc/ ?
-	{
-	 defaultos => "linux",
-	 entries => [],
-	 'init-message' => "Welcome to Mandrake Linux!",
-	 delay => 30,	#- OpenFirmware delay
-	 timeout => 50,
-	 enableofboot => 1,
-	 enablecdboot => 1,
-	 useboot => $boot,
-	 xfsroot => $xfsroot,
-	} :
-	{
-	 bootUnsafe => $unsafe,
-	 entries => [],
-	 timeout => $onmbr && 10,
-	 nowarn => 1,
-	   if_(arch() !~ /ia64/,
-	 lba32 => 1,
-	 boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
-	 map => "/boot/map",
-         ),
-	});
-
-    if (!$lilo->{message} || $lilo->{message} eq "1") {
-	$lilo->{message} = join('', cat_("$prefix/boot/message"));
-	if (!$lilo->{message}) {
-	    my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
-	    my $msg = translate($msg_en);
-	    #- use the english version if more than 20% of 8bits chars
-	    $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
-	    $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
-	}
-    }
-
-    add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
-    if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
-	log::l("serial console $s $port $speed");
-	add_append($lilo, 'console' => $s);
-	any::set_login_serial_console($prefix, $port, $speed);
-    }
-
-    my %labels = get_kernels_and_labels($prefix);
-    $labels{''} or die "no kernel installed";
-
-    while (my ($ext, $version) = each %labels) {
-	my $entry = add_kernel($prefix, $lilo, $version, $ext, $root,
-	       {
-		if_($vga_fb && $ext eq '', vga => $vga_fb), #- using framebuffer
-	       });
-	$entry->{append} .= " quiet" if $vga_fb && $version !~ /smp|enterprise/ && $quiet;
-
-	if ($vga_fb && $ext eq '') {
-	    add_kernel($prefix, $lilo, $version, $ext, $root, { label => 'linux-nonfb' });
-	}
-    }
-    my $failsafe = add_kernel($prefix, $lilo, $labels{''}, '', $root, { label => 'failsafe' });
-    $failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
-    $failsafe->{append} .= " failsafe";
-
-    if (arch() =~ /sparc/) {
-	#- search for SunOS, it could be a really better approach to take into account
-	#- partition type for mounting point.
-	my $sunos = 0;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => $path,
-			   label => "sunos"   . ($sunos++ ? $sunos : ''),
-			  }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
-	    }
-	}
-    } elsif (arch() =~ /ppc/) {
-	#- if we identified a MacOS partition earlier - add it
-	if (defined $partition_table_mac::macos_part) {
-	    add_entry($lilo->{entries},
-		      {
-		       label => "macos",
-		       kernel_or_dev => $partition_table_mac::macos_part
-		      });
-	}
-    } elsif (arch() !~ /ia64/) {
-	#- search for dos (or windows) boot partition. Don't look in extended partitions!
-	my %nbs;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => "/dev/$_->{device}",
-			   label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
-			     if_($_->{device} =~ /[1-4]$/, 
-			   table => "/dev/$_->{rootDevice}"
-				),
-			   unsafe => 1
-			  }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
-	    }
-	}
-    }
-    foreach ('secure', 'enterprise', 'smp') {
-	if (get_label("linux-$_", $lilo)) {
-	    $lilo->{default} ||= "linux-$_";
-	    last;
-	}
-    }
-    $lilo->{default} ||= "linux";
-
-    my %l = (
-	     yaboot => to_bool(arch() =~ /ppc/),
-	     silo => to_bool(arch() =~ /sparc/),
-	     lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
-	     grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
-	     loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
-	    );
-    unless ($lilo->{methods}) {
-	$lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
-	if ($lilo->{methods}{lilo} && -e "$prefix/boot/message-graphic") {
-	    $lilo->{methods}{lilo} = "lilo-graphic";
-	    exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
-	}
-    }
-}
-
-sub suggest_floppy {
-    my ($bootloader) = @_;
-
-    my $floppy = detect_devices::floppy() or return;
-    $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
-    add_entry($bootloader->{entries},
-      {
-       type => 'other',
-       kernel_or_dev => '/dev/fd0',
-       label => 'floppy',
-       unsafe => 1
-      });
-}
-
-sub keytable($$) {
-    my ($prefix, $f) = @_;
-    local $_ = $f;
-    if ($_ && !/\.klt$/) {
-	$f = "/boot/$_.klt";
-	run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
-    }
-    $f && -r "$prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
-    my ($b, $want_profiles) = @_;
-
-    my $office = get_label("office", $b);
-    if ($want_profiles xor $office) {
-	my $e = get_label("linux", $b);
-	if ($want_profiles) {
-	    push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
-	    $e->{append} .= " prof=Home";
-	} else {
-	    # remove profiles
-	    $e->{append} =~ s/\s*prof=\w+//;
-	    @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
-	}
-    }
-
-}
-
-sub get_of_dev($$) {
-	my ($prefix, $unix_dev) = @_;
-	#- don't care much for this - need to run ofpath rooted, and I need the result
-	#- In test mode, just run on "/", otherwise you can't get to the /proc files		
-	if ($::testing) {
-		$prefix = "";
-	}
-	run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
-	open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
-	my $of_dev = "";
-	local $_ = "";
-	while (<FILE>){
-		$of_dev = $_;
-	}
-	chop($of_dev);
-	my @del_file = ($prefix . "/tmp/ofpath");
-	unlink (@del_file);
-	log::l("OF Device: $of_dev");
-	$of_dev;
-}
-
-sub install_yaboot($$$) {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    if ($lilo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/etc/yaboot.conf";
-	open F, ">$f" or die "cannot create yaboot config file: $f";
-	log::l("writing yaboot config to $f");
-
-	print F "#yaboot.conf - generated by DrakX";
-	print F "init-message=\"\\n$lilo->{'init-message'}\\n\"" if $lilo->{'init-message'};
-
-	if ($lilo->{boot}) {
-	    print F "boot=$lilo->{boot}";
-	    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-	    print F "ofboot=$of_dev";
-	} else {
-	    die "no bootstrap partition defined."
-	}
-	
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
-	print F "install=/usr/local/lib/yaboot/yaboot";
-	print F "magicboot=/usr/local/lib/yaboot/ofboot";
-	$lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
-	#- print F "nonvram";
-	my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-		
-	foreach (@{$lilo->{entries}}) {
-
-	    if ($_->{type} eq "image") {
-		my $of_dev = '';
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    $of_dev = get_of_dev($prefix, $boot);
-		    print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
-		} else {
-		    $of_dev = get_of_dev($prefix, $_->{root});    			
-		    print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
-		}
-		print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
-		print F "\troot=$_->{root}";
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
-		} else {
-		    print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
-		}
-		#- xfs module on PPC requires larger initrd - say 6MB?
-		print F "\tinitrd-size=6144" if $lilo->{xfsroot};
-		print F "\tappend=\" $_->{append}\"" if $_->{append};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
-		print F "$_->{label}=$of_dev";		
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    my $f = "$prefix/tmp/of_boot_dev";
-    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-    output($f, "$of_dev\n");  
-    $::testing and return;
-    if (defined $install_steps_interactive::new_bootstrap) {
-	run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
-    }	
-    run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
-    unlink "$prefix/tmp/.error";	
-}
-
-sub install_silo($$$) {
-    my ($prefix, $silo, $fstab) = @_;
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
-    #- setup boot promvars for.
-    require c;
-    if ($boot =~ /^md/) {
-	#- get all mbr devices according to /boot are listed,
-	#- then join all zero based partition translated to prom with ';'.
-	#- keep bootdev with the first of above.
-	log::l("/boot is present on raid partition which is not currently supported for promvars");
-    } else {
-	if (!$silo->{use_partition}) {
-	    foreach (@$fstab) {
-		if (!$_->{start} && $_->{device} =~ /$wd/) {
-		    $boot = $_->{device};
-		    log::l("found a zero based partition in $wd as $boot");
-		    last;
-		}
-	    }
-	}
-	$silo->{bootalias} = c::disk2PromPath($boot);
-	$silo->{bootdev} = $silo->{bootalias};
-        log::l("preparing promvars for device=$boot");
-    }
-    c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
-    if ($silo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
-	symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
-	open F, ">$f" or die "cannot create silo config file: $f";
-	log::l("writing silo config to $f");
-
-	$silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
-	$silo->{$_} and print F $_ foreach qw(restricted);
-	print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
-	print F "message=$silo->{boot}/message" if $silo->{message};
-
-	foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
-	    my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
-	    print F $type;
-	    print F "\tlabel=$_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
-		print F "\tpartition=$_->{partition}" if $_->{partition};
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=$initrd" if $_->{initrd};
-		print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or 
-        run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
-    unlink "$prefix/tmp/.error";
-
-    #- try writing in the prom.
-    log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
-    require c;
-    c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub make_label_lilo_compatible {
-    my ($label) = @_; 
-    $label = substr($label, 0, 15); #- lilo doesn't handle more than 15 char long labels
-    $label =~ s/\s/_/g; #- lilo doesn't like spaces
-    $label;
-}
-
-sub write_lilo_conf {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    delete $lilo->{linear} if $lilo->{lba32};
-
-    my $file2fullname = sub {
-	my ($file) = @_;
-	if (arch() =~ /ia64/) {
-	    (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
-	    my %hds = map_index { $_ => "hd$::i" } map { $_->{device} } 
-	      sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
-	    %hds->{$part->{device}} . ":" . $file;
-	} else {
-	    $file
-	}
-    };
-
-    my %bios2dev = map_index { $::i => $_ } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot});
-    my %dev2bios = reverse %bios2dev;
-
-    if (is_empty_hash_ref($lilo->{bios} ||= {})) {
-	my $dev = $hds->[0]{device};
-	if ($dev2bios{$dev}) {
-	    log::l("Since we're booting on $bios2dev{0}, make it bios=0x80, whereas $dev is now " . (0x80 + $dev2bios{$dev}));
-	    $lilo->{bios}{"/dev/$bios2dev{0}"} = '0x80';
-	    $lilo->{bios}{"/dev/$dev"} = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-	}
-	foreach (0 .. 3) {
-	    my ($letter) = $bios2dev{$_} =~ /hd([^ac])/; #- at least hda and hdc are handled correctly :-/
-	    next if $lilo->{bios}{"/dev/$bios2dev{$_}"} || !$letter;
-	    next if 
-	      $_ > 0	     #- always print if first disk is hdb, hdd, hde...
-		&& $bios2dev{$_ - 1} eq "hd" . chr(ord($letter) - 1);
-	    #- no need to help lilo with hdb (resp. hdd, hdf...)
-	    log::l("Helping lilo: $bios2dev{$_} must be " . (0x80 + $_));
-	    $lilo->{bios}{"/dev/$bios2dev{$_}"} = sprintf("0x%x", 0x80 + $_);
-	}
-    }
-
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
-
-	open F, ">$f" or die "cannot create lilo config file: $f";
-	log::l("writing lilo config to $f");
-
-	chmod 0600, $f if $lilo->{password};
-
-	#- normalize: RESTRICTED is only valid if PASSWORD is set
-	delete $lilo->{restricted} if !$lilo->{password};
-
-	local $lilo->{default} = make_label_lilo_compatible($lilo->{default});
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default keytable);
-	$lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt nowarn restricted);
-	print F "append=\"$lilo->{append}\"" if $lilo->{append};
- 	print F "password=", $lilo->{password} if $lilo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
-	print F "serial=", $1 if get_append($lilo, 'console') =~ /ttyS(.*)/;
-
-	print F "message=/boot/message" if (arch() !~ /ia64/);
-	print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
-	print F "ignore-table" if grep { $_->{unsafe} && $_->{table} } @{$lilo->{entries}};
-
-	while (my ($dev, $bios) = each %{$lilo->{bios}}) {
-	    print F "disk=$dev bios=$bios";
-	}
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
-	    print F "\tlabel=", make_label_lilo_compatible($_->{label});
-
-	    if ($_->{type} eq "image") {		
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
-		print F "\tappend=\"$_->{append}\"" if $_->{append};
-		print F "\tvga=$_->{vga}" if $_->{vga};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		print F "\ttable=$_->{table}" if $_->{table};
-		print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-		
-		if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
-		    if ($dev2bios{$dev}) {
-			#- boot off the nth drive, so reverse the BIOS maps
-			my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-			$_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-		    }
-		}
-		while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
-		    print F "\tmap-drive=$from";
-		    print F "\t   to=$to";
-		}
-	    }
-	}
-    }
-}
-
-sub install_lilo {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    $lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
-    output("$prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
-    symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$prefix/boot/message";
-
-    write_lilo_conf($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
-    unlink "$prefix/tmp/.error";
-}
-
-sub dev2bios {
-    my ($hds, $where) = @_;
-    $where =~ s|/dev/||;
-    my @dev = map { $_->{device} } @$hds;
-    member($where, @dev) or ($where) = @dev; #- if not on mbr, 
-
-    s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
-    my $start = substr($where, 0, 2);
-
-    my $translate = sub {
-	$_ eq $where ? "aaa" : #- if exact match, value it first
-	  /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
-	    $_;
-    };
-    @dev = map { $_->[0] }
-           sort { $a->[1] cmp $b->[1] }
-	   map { [ $_, &$translate ] } @dev;
-
-    s/x(d.)/h$1/ foreach @dev; #- switch back;
-
-    @dev;
-}
-
-sub dev2grub {
-    my ($dev, $dev2bios) = @_;
-    $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
-    my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
-    "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    my %dev2bios = (
-      (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
-      (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
-    );
-
-    {
-	my %bios2dev = reverse %dev2bios;
-	output "$prefix/boot/grub/device.map", 
-	  join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
-    }
-    my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
-    my $file2grub = sub {
-	my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
-	dev2grub($part->{device}, \%dev2bios) . $file;
-    };
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/grub/menu.lst";
-	open F, ">$f" or die "cannot create grub config file: $f";
-	log::l("writing grub config to $f");
-
-	$lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
-	print F "color black/cyan yellow/cyan";
-	print F "i18n ", $file2grub->("/boot/grub/messages");
-	print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
-	print F "serial --unit=$1 --speed=$2\nterminal --timeout=" . ($lilo->{timeout} || 0) . " console serial" if get_append($lilo, 'console') =~ /ttyS(\d),(\d+)/;
-
-	#- since we use notail in reiserfs, altconfigfile is broken :-(
-	unless ($bootIsReiser) {
-	    print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
-	    output "$prefix$once", " " x 100;
-	}
-
-	map_index {
-	    print F "default $::i" if $_->{label} eq $lilo->{default};
-	} @{$lilo->{entries}};
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "\ntitle $_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $vga = $_->{vga} || $lilo->{vga};
-		printf F "kernel %s root=%s %s%s%s\n",
-		  $file2grub->($_->{kernel_or_dev}),
-		  $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-		  $_->{append},
-		  $_->{'read-write'} && " rw",
-		  $vga && $vga ne "normal" && " vga=$vga";
-		print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
-	    } else {
-		print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
-		if ($_->{kernel_or_dev} !~ /fd/) {
-		    #- boot off the second drive, so reverse the BIOS maps
-		    $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' } 
-		      if $_->{table} && ($lilo->{first_hd_device} || $lilo->{boot}) !~ /$_->{table}/;
-	    
-		    map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
-		    print F "makeactive";
-		}
-		print F "chainloader +1";
-	    }
-	}
-    }
-    my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
-    my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
-    my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
-    my $f = "/boot/grub/install.sh";
-    output "$prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
-     output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-   
-    my $e = "$prefix/boot/.enough_space";
-    output $e, 1; -s $e or die _("not enough room in /boot");
-    unlink $e;
-    $f;
-}
-
-sub install_grub {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    symlink "$prefix/boot", "/boot";
-    run_program::run_or_die("sh", $f);
-    unlink "$prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file { 
-    my $lilo = shift;
-    map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
-    my ($prefix, $lilo) = @_;
-    my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
-    cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
-    cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
-
-    $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}", 
-      lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
-	$e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
-    my ($prefix, $lilo, $fstab) = @_;
-
-    my $boot;
-    ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
-    ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
-    ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
-    log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
-    $lilo->{boot_drive} = $boot->{device_windobe};
-
-    my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
-    log::l("winpart is $winpart->{device}");
-    my $winhandle = any::inspect($winpart, $prefix, 'rw');
-    my $windrive = $winhandle->{dir};
-    log::l("windrive is $windrive");
-
-    my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
-
-    #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
-    #install_loadlin_desktop($lilo, $windrive);
-
-    output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
-    my ($lilo, $windrive, $label, $cmd) = @_;
-
-    my $config_sys = "$windrive/config.sys";
-    local $_ = cat_($config_sys);
-    output "$windrive/config.mdk", $_ if $_;
-    
-    my $timeout = $lilo->{timeout} || 1;
-
-    $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
-    #- remove existing entry
-    s/^menuitem=$label\s*//mi;    
-    s/\n\[$label\].*?(\n\[|$)/$1/si;
-
-    #- add entry
-    s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
-    $_ .= "
-[$label]
-shell=$cmd
-";
-    output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
-    my ($lilo, $windrive) = @_;
-    my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-    foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows 
-	     __("Start Menu")) {
-        my $d = "$windrive/$windir/" . translate($_);
-        -d $d or $d = "$windrive/$windir/$_";
-        -d $d or log::l("can't find windows $d directory"), next;
-        output "$d/Linux4Win.url", unix2dos(sprintf 
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
-    }
-}
-
-
-sub install {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
-	die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
-	  if isThisFs('xfs', $p);
-    }
-    $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
-
-    if (exists $lilo->{methods}{grub}) {
-	#- when lilo is selected, we don't try to install grub. 
-	#- just create the config file in case it may be useful
-	eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
-    }
-
-    my %l = grep_each { $::b } %{$lilo->{methods}};
-    my @rcs = map {
-	c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
-	my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
-	eval { $f->(@_) };
-	$@;
-    } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-    
-    return if grep { !$_ } @rcs; #- at least one worked?
-    die first(map { $_ } @rcs);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #