summaryrefslogtreecommitdiffstats
path: root/rescue/tree/etc/oem
diff options
context:
space:
mode:
Diffstat (limited to 'rescue/tree/etc/oem')
-rwxr-xr-xrescue/tree/etc/oem674
1 files changed, 0 insertions, 674 deletions
diff --git a/rescue/tree/etc/oem b/rescue/tree/etc/oem
deleted file mode 100755
index 7b87a4560..000000000
--- a/rescue/tree/etc/oem
+++ /dev/null
@@ -1,674 +0,0 @@
-#!/usr/bin/perl
-
-if (shift(@ARGV) ne '-f') {
- print "Call it with option -f, but don't fear loosing all your data, this command is dangerous!";
- print "
-usage: /etc/oem -f [options]
-where [options] are:
- server : allow server installalation
- boot_entries=entry1,...,entryN : set boot entries to use,
- the first one is the default one
- no<option> : disable options <option>
-";
- exit 1;
-}
-my (%options, $yes, $hd, $hdp, $cd, $fs);
-
-#- avoid globing as it is not available in rescue ramdisk.
-foreach my $device (split ' ', `/bin/ls -d /proc/ide/hd*`) {
- open F, "$device/media" or next;
- foreach (<F>) {
- /disk/ and do { $hd ||= $device; $hd =~ s,/proc/ide/,,; };
- /cdrom/ and do { $cd ||= $device; $cd =~ s,/proc/ide/,,; };
- }
- close F;
-}
-#- examine available SCSI devices (avoid SCSI floppies like LS-120 or ZIP disk or generic floppies).
-eval {
- system "/usr/bin/drvinst"; #- load scsi drivers else it wont do anything.
-
- my ($driveNum, $cdromNum) = (0, 0);
- open F, "/proc/scsi/scsi" or die "no scsi available";
- local $_ = <F>; /^Attached devices:/ or die "to attached devices found";
- while ($_ = <F>) {
- my ($id) = /^Host:.*?Id: (\d+)/ or die "no host found";
- $_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or die "no vendor nor model found";
- $_ = <F>; my ($type) = /^\s*Type:\s*(.*)/;
- if ($type =~ /Direct-Access/ && $model !~ /ZIP\s+\d+|LS-?120|144MB|[Ff]loppy/) {
- $hd ||= "sd" . chr($driveNum++ + ord('a'));
- } elsif ($type =~ /CD-ROM/) {
- $cd ||= "scd" . $cdromNum++;
- }
- }
- close F;
-};
-#- examine DAC960 device.
-#- there is a problem as there is no more than 7 partitions available, this means no /home and no /var.
-unless ($hd) {
- local $_;
- open F, "dmesg |";
- while (<F>) {
- m|/dev/(rd/.*?): .*?,| and $hd ||= $1, last;
- }
- close F;
- if ($hd) {
- my ($c_id, $d_id) = $hd =~ m|rd/c(\d+)d(\d+)|;
- -d "/dev/rd" or mkdir "/dev/rd";
- system "mknod", "/dev/$hd", "b", 48+$c_id, 8*$d_id;
- foreach (1..7) {
- system "mknod", "/dev/${hd}p$_", "b", 48+$c_id, 8*$d_id+$_;
- }
- $hdp = $hd . 'p';
- }
-}
-#- examine Compaq Smart Array device.
-unless ($hd) {
- foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
- my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
- $prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
- my ($name) = m|/(.*)|;
- for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
- local $_;
- open F, $f;
- while (<F>) {
- if (m|^\s*($name/.*?):|) {
- $hd ||= $1;
- }
- }
- close F;
- }
- }
- if ($hd) {
- my ($type, $c_id, $d_id) = $hd =~ m,(ida|cciss)/c(\d+)d(\d+),;
- -d "/dev/$type" or mkdir "/dev/$type";
- system "mknod", "/dev/$hd", "b", ($type eq 'ida' ? 72 : 104)+$c_id, 16*$d_id;
- foreach (1..15) {
- system "mknod", "/dev/${hd}p$_", "b", ($type eq 'ida' ? 72 : 104)+$c_id, 16*$d_id+$_;
- }
- $hdp = $hd . 'p';
- }
-}
-$hd && -e "/dev/$hd" or die "unable to access hard disk";
-print "hd: $hd\ncd: $cd\n";
-$hdp ||= $hd;
-
-#- try to free any reference to hard disk which will be used (as in rescue mode it has already loaded
-#- existing partition in /mnt.
-open F, "/proc/mounts";
-while (<F>) {
- /$hdp(\d*)\s+(\S+)/ and $already_mounted{$2} = "$hdp$1";
-}
-foreach (sort { $b cmp $a } keys %already_mounted) {
- print "umounting $already_mounted{$_} from $_\n";
- system "umount", $_;
-}
-
-#- find a cdrom (like) image, normally a true cdrom but if nfs install is running, use it instead.
-mkdir "/cdrom";
-open F, "/proc/cmdline";
-while (<F>) {
- /automatic=method:nfs,.*server:([^\s,]*),.*directory:([^\s,]*)/
- and system "mount", "-r", "-t", "nfs", "$1:$2", "/cdrom", "-o", "nolock";
-}
-close F;
-unless (-e "/cdrom/VERSION") {
- -e "/dev/$cd" or die "unable to access local cdrom";
- system "mount", "-r", "-t", "iso9660", "/dev/$cd", "/cdrom";
-}
-
-#- using default options for HP.
-#$options{free_size} = 500;
-#$options{free_primary} = 1;
-#$options{free_fs} = 'fat32';
-#$options{boot_entries} = 'linux,linux-nonfb,restore,failsafe,floppy';
-#$options{kernel} = "acpi=off";
-
-open F, "/cdrom/VERSION" or die "no installation cdrom found on $cd";
-while (<F>) {
- /\[boot_entries[=:]([^]]*)\]/ and $options{boot_entries} = $1;
- /\[ext2\]/ and $options{fs} = "ext2";
- /\[ext3\]/ and $options{fs} = "ext3";
-}
-close F;
-foreach (@ARGV) { /^([^=:]*)[=:]?(.*)/ and $options{$1} = $2; /^no([^=:]*)/ and delete $options{$1} }
-
-foreach (keys %options) {
- print "Using option [$_" . ($options{$_} && "=$options{$_}") . "]\n";
-}
-
-#- filesystem to use.
-$fs ||= $options{fs} || "ext3";
-$fs eq "ext3" and system "modprobe", "ext3";
-print "Using filesystem of type $fs\n";
-
-#- check for already existing partition table, if none are found
-#- create 3 partitions (one for install, one for swap and one for root).
-#- if only a fat partition is found, resize it do include the above partition.
-#- other combination are really dangerous and are not supported, ask
-#- the user that all data on the disk will be erased and go on.
-my ($heads, $sectors, $cylinders, $hd_size, @hd_parts);
-sub correct_start_end {
- my ($rstart, $end, $keep_start) = @_;
- my ($cylinder_size, $c_start, $c_end) = ($sectors*$heads*512/1024/1024, undef, undef);
- if (abs($cylinder_size*$cylinders-$hd_size)/$hd_size < 0.01) {
- $c_start = $$rstart+($keep_start ? 0 : $cylinder_size/$heads);
- $c_end = $cylinder_size*int(1/2+$end/$cylinder_size);
- $c_end > $hd_size and $c_end = $hd_size;
- $$rstart = $c_end;
- } else {
- $c_start = $$rstart;
- $c_end = $end;
- $c_end > $hd_size and $c_end = $hd_size;
- $$rstart = $c_end+5; #- fall back to use a problable safe method.
- }
- $c_start >= $c_end and die "no space left for partitionning\n";
- ($c_start, $c_end);
-}
-open F, "fdisk -l /dev/$hd |";
-while (<F>) {
- /(\d+)\s*heads/ and $heads = $1;
- /(\d+)\s*sectors/ and $sectors = $1;
- /(\d+)\s*cylinders/ and $cylinders = $1;
-}
-if ($heads == 1 && $cylinders == 1) {
- $cylinders = $sectors / 255 / 63;
- $heads = 255;
- $sectors = 63;
-}
-close F;
-for (1..2) {
- open F, "parted /dev/$hd -s print |";
- while (<F>) {
- /^Disk geometry [^:]*:\s*([\d\.]+)-([\d\.]+)/ and do { $hd_size = $2 - $1 - 1 };
- #/^Disk label type:\s*msdos/ and do { $hd_type = 'msdos' };
- /^(\d+)\s+([\d\.]+)\s+([\d\.]+)\s+(primary|logical|extended)\s*(\S*)/ and do {
- #- this automatically drops extended partition here!
- push @hd_parts, { minor => $1, start => $2, end => $3, type => $4, fstype => $5 };
- };
- }
- close F;
- $hd_size and last;
- print "Unable to detect partition on disk, trying with new label\n";
- do {
- print "
-
-I'm going to install the OEM version on your hard drive
-!!ALL DATA WILL BE LOST!!
-
-Type \`\`yes'' and [enter] to go on\n"
- } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i);
- system "parted", "/dev/$hd", "mklabel", "msdos";
-}
-my $min_size = $options{min_size} || 9000;
-my $def_size = $options{def_size} || 8500;
-my $trigger_size = $options{trigger_size} || 9000;
-#my $inst_size = $options{inst_size} || 1500;
-my $inst_size = $options{inst_size} || 5000;
-my $swap_size = $options{swap_size} || 128;
-$hd_size > $min_size or die "hard disk is too small to contain oem install (${hd_size}MB found, need $min_size at least)";
-
-my ($fat_pos, $resize_fat_size, $root_size);
-if (@hd_parts == 1 && $hd_parts[$fat_pos = 0]{fstype} eq 'FAT' ||
- @hd_parts == 2 && $hd_parts[0]{type} eq 'primary' && $hd_parts[$fat_pos = 1]{fstype} eq 'FAT' ||
- @hd_parts == 3 && $hd_parts[0]{type} eq 'primary' && $hd_parts[1]{type} eq 'primary' && $hd_parts[$fat_pos = 2]{fstype} eq 'FAT' ||
- @hd_parts == 2 && $hd_parts[0]{type} eq 'extended' && $hd_parts[$fat_pos = 1]{fstype} eq 'FAT' ||
- @hd_parts == 3 && $hd_parts[0]{type} eq 'extended' && $hd_parts[1]{type} eq 'primary' && $hd_parts[$fat_pos = 5]{fstype} eq 'FAT') {
- if ($hd_size - $hd_parts[$fat_pos]{end} > $min_size + $options{free_size}) {
- #- check first if there are some available space left on the disk.
- #- so we are using it, root_size is fixed to match hard disk size.
- $resize_fat_size = 0;
- $root_size = $hd_size - $hd_parts[$fat_pos]{end} - $options{free_size} - $inst_size - $swap_size;
- $root_size > $trigger_size and $root_size = $def_size;
- } elsif ($hd_size > 2*$min_size + $options{free_size}) {
- #- resize this fat partition.
- $resize_fat_size = 0.5 * $hd_size;
- $root_size = $hd_size - $resize_fat_size - $options{free_size} - $inst_size - $swap_size;
- $root_size > $trigger_size and $root_size = $def_size;
- }
-}
-unless ($root_size) {
- #- there have not been defined above, so remove everything and start from
- #- a blank partition.
- $resize_fat_size = undef;
- $root_size = $hd_size - $resize_fat_size - $options{free_size} - $inst_size - $swap_size;
- $root_size > $trigger_size and $root_size = $def_size;
-}
-
-#- launch parted to edit partition table, start at minor.
-#- point define where we start.
-my $minor = defined $resize_fat_size && $hd_parts[0]{type} eq 'extended' ? 6 : 5;
-my $point = 0.0;
-my @commands;
-
-if (defined $resize_fat_size) {
- do {
- print "
-
-!!An existing Windows partition has been found and will be kept.
-Additional Linux partitions will be created!!
-
-Type \`\`yes'' and [enter] to go on\n"
- } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i);
- #- keep the current partition table, and try to resize the fat partition
- #- if the size is not 0.
- #- KEEP IN MIND there is only one partition defined.
- if ($resize_fat_size) {
- $point = $hd_parts[$fat_pos]{start};
- push @commands, sprintf "resize %d %s %s", $hd_parts[$fat_pos]{minor}, correct_start_end(\$point, $point+$resize_fat_size, 'keepstart');
- } else {
- $point = $hd_parts[$fat_pos]{end};
- }
- $point+=9; #- keep blank space between partitions if parted cannot handle partition table correctly.
-} else {
- unless (defined $yes) {
- do {
- print "
-
-I'm going to install the OEM version on your hard drive
-!!ALL DATA WILL BE LOST!!
-
-Type \`\`yes'' and [enter] to go on\n"
- } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i);
- }
- #- build a new disk label here.
- push @commands, "mklabel msdos";
-}
-
-#- at this point, the partition are created.
-my ($instz, $inst, $swap, $root, $var, $home, $free) = ($minor-1, $minor, $minor+1, $minor+2, undef, undef, undef);
-
-#- all linux partition are stored inside an extended partition, this is easier to manipulate after.
-my $free_point = $point;
-if ($minor == 5) {
- push @commands, sprintf "mkpart extended %s %s", correct_start_end(\$free_point, $hd_size - ($options{free_primary} && $options{free_size}),
- 'keepstart');
-} else {
- $hd_parts[0]{type} eq 'extended' or die "first partition assumed to be extended";
- $point = $hd_parts[0]{start};
- push @commands, sprintf "resize %s %s %s", $hd_parts[0]{minor}, correct_start_end(\$free_point,
- $hd_size - ($options{free_primary} && $options{free_size}),
- 'keepstart');
-}
-push @commands, sprintf "mkpart logical ext2 %s %s", correct_start_end(\$point, $point+$inst_size);
-push @commands, sprintf "mkpart logical linux-swap %s %s", correct_start_end(\$point, $point+$swap_size);
-push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $point+$root_size);
-if (exists $options{server} && $hd !~ /^rd\//) {
- my $var_size = ($hd_size - $point) / 2;
- if ($var_size > 1500) {
- $var = $root+1;
- push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $point+$var_size);
- }
-}
-if ($hd_size - $point - $options{free_size} > 100 && $hd !~ /^rd\//) {
- $home = ($var || $root) + 1;
- push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $hd_size-$options{free_size});
-}
-if ($options{free_size} && $options{free_fs}) {
- if ($options{free_primary}) {
- $free = scalar(grep { $_->{type} eq 'primary' } @hd_parts) + 2;
- if ($free > 4) {
- $free = ($home || $var || $root) + 1;
- delete $options{free_primary};
- print "Unable to use primary partition for free partition, using logical partition.\n";
- }
- } else {
- $free = ($home || $var || $root) + 1;
- }
- push @commands, sprintf "mkpart %s %s %s %s", $options{free_primary} ? 'primary' : 'logical', $options{free_fs}, correct_start_end($options{free_primary} ? \$free_point : \$point, $hd_size);
-}
-system("parted", "-s", "/dev/$hd", @commands) == 0 or die "unable to partition the disk $hd";
-
-#- try to help user if a free space has been set and no fs defined for it.
-if ($options{free_size} && !$options{free_fs}) {
- print "
-
-!!A free space has been configured, now you can use parted
-to defined the partition as you want.
-
-Type \`\`quit'' and [enter] to finish parted\n";
- system "parted", "-i", "/dev/$hd";
-}
-
-#- we have to build swap and mount it.
-print "Setting swap\n";
-system "mkswap", "/dev/$hdp$swap";
-system "swapon", "/dev/$hdp$swap";
-
-#- we have to format using right fs.
-print "Formatting /dev/$hdp$inst partition\n";
-mkfs("ext2", "/dev/$hdp$inst");
-print "Formatting /dev/$hdp$root partition\n";
-mkfs($fs, "/dev/$hdp$root");
-if ($var) {
- print "Formatting /dev/$hdp$var partition\n";
- mkfs($fs, "/dev/$hdp$var");
-}
-if ($home) {
- print "Formatting /dev/$hdp$home partition\n";
- mkfs($fs, "/dev/$hdp$home");
-}
-if ($free) {
- print "Formatting /dev/$hdp$free partition\n";
- mkfs($options{free_fs}, "/dev/$hdp$free");
-}
-
-print "Mounting partitions\n";
-mkdir "/hd";
-system "mount", "-t", "ext2", "/dev/$hdp$inst", "/hd";
-mkdir "/mnt";
-system "mount", "-t", $fs, "/dev/$hdp$root", "/mnt";
-if ($var) {
- mkdir "/mnt/var";
- system "mount", "-t", $fs, "/dev/$hdp$var", "/mnt/var";
-}
-if ($home) {
- mkdir "/mnt/home";
- system "mount", "-t", $fs, "/dev/$hdp$home", "/mnt/home";
-}
-
-print "Copying installation on hard drive\n";
-mkdir "/hd/boot";
-if (-e "/cdrom/oem/vmlinuz" && -e "/cdrom/oem/all.rdz") {
- system "cp", "-a", "/cdrom/oem/vmlinuz", "/hd/boot/vmlinuz";
- system "cp", "-a", "/cdrom/oem/all.rdz", "/hd/boot/all.rdz";
-} elsif (-e "/cdrom/isolinux/alt0/vmlinuz" && -e "/cdrom/isolinux/alt0/all.rdz") {
- system "cp", "-a", "/cdrom/isolinux/alt0/vmlinuz", "/hd/boot/vmlinuz";
- system "cp", "-a", "/cdrom/isolinux/alt0/all.rdz", "/hd/boot/all.rdz";
-} elsif (-e "/cdrom/boot/vmlinuz" && -e "/cdrom/boot/hd.rdz") {
- system "cp", "-a", "/cdrom/boot/vmlinuz", "/hd/boot/vmlinuz";
- system "cp", "-a", "/cdrom/boot/hd.rdz", "/hd/boot/all.rdz";
-} elsif (-e "/cdrom/images/hd.img") {
- mkdir "/tmp/hd";
- system "modprobe", "loop";
- system "modprobe", "vfat";
- system "mount", "-t", "vfat", "/cdrom/images/hd.img", "/tmp/hd", "-o", "loop";
- system "cp", "-a", "/tmp/hd/vmlinuz", "/hd/boot/vmlinuz";
- system "cp", "-a", "/tmp/hd/hd.rdz", "/hd/boot/all.rdz";
- system "umount", "/tmp/hd";
-} else {
- die "no installation stage1 found";
-}
-
-mkdir "/hd/Mandrake";
-mkdir "/hd/Mandrake/RPMS";
-system "cp", "-a", "/cdrom/VERSION", "/hd";
-system "cp", "-a", "/cdrom/Mandrake/base", "/cdrom/Mandrake/mdkinst", "/cdrom/Mandrake/share", "/hd/Mandrake";
-
-if (open F, ">/hd/Mandrake/oem_patch.pl") {
- print "Setting OEM specific extension to DrakX\n";
- if (exists $options{server}) {
- print F q{
- use install_steps;
- package install_steps;
- undef *choosePackages;
- *choosePackages = sub {
- my ($o, $packages, $compssUsers, $first_time) = @_;
-
- #- make sure we kept some space left for available else the system may
- #- not be able to start (xfs at least).
- my $available = install_any::getAvailableSpace($o);
- my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
- #- avoid destroying user selection of packages but only
- #- for expert, as they may have done individual selection before.
- install_any::unselectMostPackages($o);
-
- #- use specific OEM packages selection, go to level 5
- #- and disable some extension.
- $o->{compssUsersChoice}{$_} = 0 foreach 'GNOME';
- $o->{compssUsersChoice}{$_} = 0
- foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
- $o->{compssListLevel} = 5;
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
-
- $availableCorrected;
- };
- };
- } else {
- print F q{
- use install_steps;
- package install_steps;
- undef *choosePackages;
- *choosePackages = sub {
- my ($o, $packages, $compssUsers, $first_time) = @_;
-
- #- make sure we kept some space left for available else the system may
- #- not be able to start (xfs at least).
- my $available = install_any::getAvailableSpace($o);
- my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
- #- avoid destroying user selection of packages but only
- #- for expert, as they may have done individual selection before.
- install_any::unselectMostPackages($o);
-
- #- use specific OEM packages selection, go to level 4.
- #- and select at least GAMES group, everything else has
- #- already be selected during master preparation.
- $o->{compssListLevel} = 4;
- $o->{compssUsersChoice}{$_} = 1 foreach qw(GAMES VIDEO AUDIO GRAPHICS);
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
-
- $availableCorrected;
- };
- };
- }
- if ($options{boot_entries}) {
- print "Setting OEM specific extension for boot entries\n";
- print F q{
- my $sorted_entries = q(} . $options{boot_entries} . q{); #- insert boot_entries options here as string q(...).
- my $old_setupBootloaderBefore = \&setupBootloaderBefore;
- undef *setupBootloaderBefore;
- *setupBootloaderBefore = sub {
- $old_setupBootloaderBefore->(@_);
- my @entries = split ',', $sorted_entries;
- my @result_entries;
- foreach my $p (@entries) {
- foreach (@{$_[0]{bootloader}{entries}}) {
- $_->{label} eq $p and push @result_entries, $_;
- }
- }
- if (@result_entries) {
- $_[0]{bootloader}{entries} = \@result_entries;
- $_[0]{bootloader}{default} = $result_entries[0]{label}; #- first image is default.
- }
- };
- };
- }
- close F;
-}
-
-print "Setting bootloader\n";
-mkdir "/hd/boot/grub";
-foreach (1..2) {
- -e "/hd/boot/grub/stage$_" or system "cp", "-a", "/boot/grub/stage$_", "/hd/boot/grub";
-}
-open F, ">/hd/boot/grub/menu.lst";
-if (defined $resize_fat_size) {
- print F "timeout 5\n";
- print F "color black/cyan yellow/cyan\n\n";
- print F "title linux\n";
-} else {
- print F "timeout 0\n\n";
- print F "title oem\n";
-}
-print F "kernel (hd0,$instz)/boot/vmlinuz ramdisk_size=128000 $options{kernel} automatic=method:disk,disk:$hd,partition:$hdp$inst,directory:/ hd vga=788 fbeginner oem defcfg=/tmp/hdimage/Mandrake/oem_patch.pl\n";
-print F "initrd (hd0,$instz)/boot/all.rdz\n";
-#- if a windows partition is available, add an entrie for it.
-if (defined $resize_fat_size) {
- print F "\ntitle windows\n";
- printf F "rootnoverify (hd0,%s)\n", $hd_parts[$fat_pos]{minor}-1;
- print F "makeactive\n";
- print F "chainloader +1\n";
-}
-close F;
-open F, ">/hd/boot/grub/device.map";
-print F "(hd0) /dev/$hd\n";
-close F;
-open F, "| grub --device-map=/hd/boot/grub/device.map --batch";
-print F "install (hd0,$instz)/boot/grub/stage1 d (hd0) (hd0,$instz)/boot/grub/stage2 p (hd0,$instz)/boot/grub/menu.lst\n";
-print F "quit\n";
-close F or die "error while executing grub";
-
-my $packages = read_depslist("/cdrom/Mandrake/base/depslist.ordered");
-
-my @media;
-open F, "/cdrom/Mandrake/base/hdlists";
-foreach (<F>) {
- chomp;
- s/\s*#.*$//;
- /^\s*$/ and next;
- m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-
- push @media, { hdlist => $1, rpmsdir => $2, descr => $3 };
-}
-close F;
-
-#- initialize installation.
-foreach (qw(/etc /etc/sysconfig /etc/rpm /var /var/lib /var/lib/rpm /var/log /proc)) {
- mkdir "/mnt/$_";
-}
-system "mount", "-t", "proc", "proc", "/mnt/proc";
-open F, ">/mnt/etc/fstab";
-print F "/dev/$hdp$root / $fs defaults 1 1\n";
-if ($var) {
- print F "/dev/$hdp$var /var $fs defaults 1 2\n";
-}
-if ($home) {
- print F "/dev/$hdp$home /home $fs defaults 1 2\n";
-}
-close F;
-#- stupid things for installer to work correctly.
-#open F, ">/mnt/etc/mandrake-release";
-#print F "Mandrake Linux release 9.1 (Bamboo) for i586";
-#close F;
-
-#- keep in mind all the rpm files available (according to hdlists).
-my (%files, %rpms);
-
-require packdrake;
-foreach my $medium (@media) {
- my $packer = new packdrake("/cdrom/Mandrake/base/$medium->{hdlist}");
- foreach (@{$packer->{files}}) {
- $packer->{data}{$_}[0] eq 'f' or next;
- my ($fullname, $file) = /([^:]*):(.*)/ ? ($1, "$2.rpm") : ($_, "$_.rpm");
- $files{$fullname} = $file;
- $rpms{$fullname} = $medium->{rpmsdir};
- #- convert %{ARCH} to effective arch of the given package.
- my ($arch) = $fullname =~ /\.([^\.\-]*)$/;
- $rpms{$fullname} =~ s|%{ARCH}|$arch|g;
- }
-}
-
-#- install some important packages.
-system "rpm", "--root", "/mnt", "--initdb";
-
-#- copy and install from each cd image.
-foreach my $medium (@media) {
- my $rpmsidr = $medium->{rpmsdir};
- $rpmsdir =~ s|%{ARCH}.*||; #- only for checking directory presence...
- while ($cd && ! -d "/cdrom/$rpmsdir") {
- system "unmount", "/dev/$cd";
- system "eject", "/dev/$cd";
- print "Please insert the cdrom labeled \"$medium->{descr}\"\n and press [enter] when done\n";
- $yes = <STDIN>;
- system "mount", "-r", "-t", "iso9660", "/dev/$cd", "/cdrom";
- }
-
- print "Copying packages from medium labeled \"$medium->{descr}\" to hard disk\n";
- foreach my $pkg (@{$packages->{depslist}}) {
- $files{rpm_fullname($pkg)} or next;
- my $infile = "/cdrom/" . $rpms{rpm_fullname($pkg)} . "/" . $files{rpm_fullname($pkg)};
- my $outfile = "/hd/" . $rpms{rpm_fullname($pkg)} . "/" . $files{rpm_fullname($pkg)};
- if (-r $infile && -s $infile != -s $outfile) {
- -d "/hd/" . $rpms{rpm_fullname($pkg)} or system "mkdir", "-p", "/hd/" . $rpms{rpm_fullname($pkg)};
- print " copying " . rpm_fullname($pkg) . "\n";
- system "cp", "-a", $infile, $outfile;
- if (rpm_fullname($pkg) =~ /mandrake-release/) {
- system "rpm", "-Uvh", "--root", "/mnt", "--nodeps", "--force", $outfile;
- }
- #- clean to say everything is done.
- delete $files{rpm_fullname($pkg)};
- delete $rpms{rpm_fullname($pkg)};
- }
- }
-}
-
-#- try to figure out if a oem-message-graphic already exists.
-#- if this is the case, rename it to /mnt/boot/message-graphic
-if (-e "/cdrom/Mandrake/base/oem-message-graphic") {
- print "Using specific oem graphic image\n";
- if (-e "/mnt/boot/message-graphic") {
- rename "/mnt/boot/message-graphic", "/mnt/boot/message-graphic.old";
- system "cp", "-a", "/cdrom/Mandrake/base/oem-message-graphic", "/mnt/boot/message-graphic";
- } elsif (-e "/mnt/boot/lilo-graphic/message") {
- rename "/mnt/boot/lilo-graphic/message", "/mnt/boot/lilo-graphic/message.old";
- system "cp", "-a", "/cdrom/Mandrake/base/oem-message-graphic", "/mnt/boot/lilo-graphic/message";
- }
-}
-
-#- clean all initrd image which may have been built.
-system "rm -f /mnt/boot/initrd*";
-
-system "umount", "/mnt/proc";
-$home and system "umount", "/mnt/home";
-$var and system "umount", "/mnt/var";
-system "umount", "/mnt";
-system "umount", "/hd";
-system "umount", "/cdrom";
-
-$cd and system "eject", "/dev/$cd";
-
-print "
-Done. OEM hard drive ready!
-The hard drive is now ready for a customer.
-System is now halted.\n\n";
-
-system "halt";
-
-#- gives way to format partition (simpler approach)
-sub mkfs {
- my ($fs, $dev) = @_;
- for ($fs) {
- /ext2/ and do { system "mkfs.ext2", $dev;
- next };
- /ext3/ and do { system "mkfs.ext2", "-j", $dev;
- system "tune2fs", "-c0", "-i0", $dev;
- next };
- /fat16/ and do { system "mkdosfs", $dev;
- next };
- /fat32/ and do { system "mkdosfs", "-F", "32", $dev;
- next };
- die "unknown fs: $_\n";
- }
-}
-
-sub chop_version {
- ($_[0] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::\S*)?/)[0] || die "unable to parse $_[0]";
-}
-sub rpm_fullname {
- ($_[0]{name} =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::\S*)?/)[0] || die "unable to parse $_[0]";
-}
-
-sub read_depslist {
- my ($file) = @_;
- my $packages = { depslist => [], names => {} };
-
- #- read depslist.oredered file.
- my $id = 0;
-
- open F, "$file" or die "unable to open ordered dependencies list file";
- while (<F>) {
- my ($name, $size, @deps) = split;
- push @{$packages->{depslist}}, { id => $id++, name => $name, size => $size, deps => \@deps };
- }
- close F;
-
- foreach (@{$packages->{depslist}}) {
- $packages->{names}{chop_version($_->{name})} = $_;
- }
-
- print "read " . scalar(@{$packages->{depslist}}) . " package dependancies\n";
- $packages;
-}
-