summaryrefslogtreecommitdiffstats
path: root/perl-install/printer
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer')
-rw-r--r--perl-install/printer/cups.pm2
-rw-r--r--perl-install/printer/default.pm2
-rw-r--r--perl-install/printer/detect.pm10
-rw-r--r--perl-install/printer/gimp.pm14
-rw-r--r--perl-install/printer/main.pm289
-rw-r--r--perl-install/printer/office.pm16
-rw-r--r--perl-install/printer/printerdrake.pm270
-rw-r--r--perl-install/printer/services.pm2
8 files changed, 297 insertions, 308 deletions
diff --git a/perl-install/printer/cups.pm b/perl-install/printer/cups.pm
index 60efc7a04..127c342bb 100644
--- a/perl-install/printer/cups.pm
+++ b/perl-install/printer/cups.pm
@@ -8,7 +8,7 @@ use common;
#------------------------------------------------------------------------------
-sub lpstat_v {
+sub lpstat_v() {
map {
if (my ($queuename, $uri) = m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
+{ queuename => $queuename, uri => $uri, if_($uri =~ m!^ipp://([^/:]+)[:/]!, ipp => $1) };
diff --git a/perl-install/printer/default.pm b/perl-install/printer/default.pm
index 5c15645d2..af997fd48 100644
--- a/perl-install/printer/default.pm
+++ b/perl-install/printer/default.pm
@@ -31,7 +31,7 @@ sub get_printer {
return undef;
}
-sub printer_type($) { "LOCAL" }
+sub printer_type() { "LOCAL" }
sub get_spooler () {
if (-f "$::prefix$FOOMATIC_DEFAULT_SPOOLER") {
diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm
index 61c39522d..0839a6ad6 100644
--- a/perl-install/printer/detect.pm
+++ b/perl-install/printer/detect.pm
@@ -95,7 +95,7 @@ sub whatUsbport() {
};
close $PORT;
# Remove non-printable characters
- $idstr =~ tr/[\x00-\x1f]/\./;
+ $idstr =~ tr/[\x00-\x1f]/./;
# If we do not find any item in the ID string, we try to read
# it again
my $itemfound = 0;
@@ -136,7 +136,7 @@ sub whatUsbport() {
}
# Nothing found? Try again if not in the third attempt,
# in the third attempt always accept.
- next if !$itemfound && ($j < 3);
+ next if !$itemfound && $j < 3;
# Was there a manufacturer and a model in the string?
if ($manufacturer eq "" || $model eq "") {
$manufacturer = "";
@@ -203,7 +203,7 @@ sub whatNetPrinter {
undef $modelinfo;
- } elsif ($line =~ m/^\s*(\d+)\/\S+\s+open\s+/i) {
+ } elsif ($line =~ m!^\s*(\d+)/\S+\s+open\s+!i) {
next if $ip eq "";
$port = $1;
@@ -260,7 +260,7 @@ sub getNetworkInterfaces {
if ($readline =~ /^(\S+)\s/) {
my $dev = $1;
if ($dev ne "lo") {
- push (@interfaces, $dev);
+ push @interfaces, $dev;
}
}
}
@@ -291,7 +291,7 @@ sub getIPsOfLocalMachine {
if ($readline =~ /^(\S+)\s/) {
my $dev = $1;
# ... for a real network (not lo = localhost)
- $dev_is_realnet = ($dev ne 'lo');
+ $dev_is_realnet = $dev ne 'lo';
# delete previous address
$current_ip = "";
}
diff --git a/perl-install/printer/gimp.pm b/perl-install/printer/gimp.pm
index 61a3db1e2..dd36a514b 100644
--- a/perl-install/printer/gimp.pm
+++ b/perl-install/printer/gimp.pm
@@ -59,8 +59,8 @@ sub configure {
$configfilecontent =~
s/\n/\nCurrent-Printer: $printer->{DEFAULT}\n/s;
} else {
- $configfilecontent =~ /^\s*Current\-Printer\s*:\s*(\S+)\s*$/m;
- if (!isprinterconfigured($1, $configfilecontent)) {
+ if ($configfilecontent =~ /^\s*Current\-Printer\s*:\s*(\S+)\s*$/m &&
+ !isprinterconfigured($1, $configfilecontent)) {
$configfilecontent =~
s/(Current\-Printer\s*:\s*)\S+/$1$printer->{DEFAULT}/;
}
@@ -82,7 +82,7 @@ sub addcupsremoteto {
if ($printer->{SPOOLER} eq "cups" &&
(-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) {
foreach my $listentry (@printerlist) {
- next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
+ next if $listentry !~ /^([^\|]+)\|([^\|]+)$/;
my $q = $1;
next if $q ne $queue;
my $server = $2;
@@ -174,13 +174,11 @@ sub makeprinterentry {
if ($ppd =~ /CUPS\s*\+\s*GIMP\s*\-\s*Print/im) {
# Native CUPS driver
$gimpprintqueue = 1;
- $ppd =~ /\s*\*ModelName:\s*\"(\S+)\"\s*$/im;
- $gimpprintdriver = $1;
+ $gimpprintdriver = $1 if $ppd =~ /\s*\*ModelName:\s*\"(\S+)\"\s*$/im;
} elsif ($ppd =~ /Foomatic\s*\+\s*gimp\s*\-\s*print/im) {
# GhostScript + Foomatic driver
$gimpprintqueue = 1;
- $ppd =~
- /\-sModel=((escp2|pcl|bjc|lexmark)\-[^\s\"\']*)/im;
+ $ppd =~ /\-sModel=((escp2|pcl|bjc|lexmark)\-[^\s\"']*)/im and
$gimpprintdriver = $1;
}
if ($gimpprintqueue) {
@@ -211,7 +209,7 @@ sub makeprinterentry {
return $configfile;
}
-sub findconfigfiles {
+sub findconfigfiles() {
my @configfilenames = (if_(-d "$::prefix/usr/lib/gimp/1.2", ".gimp-1.2/printrc"),
if_(-d "$::prefix/usr/lib/gimp/1.3", ".gimp-1.3/printrc"));
return () unless @configfilenames;
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 51f9ad375..24fd91bc5 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -63,10 +63,10 @@ sub spooler {
sub printer_type($) {
my ($printer) = @_;
for ($printer->{SPOOLER}) {
- /cups/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($::expert, qw(URI))};
- /lpd/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))};
- /lprng/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))};
- /pdq/ && return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($::expert, qw(URI))};
+ /cups/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($::expert, qw(URI))};
+ /lpd/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))};
+ /lprng/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))};
+ /pdq/ and return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($::expert, qw(URI))};
}
}
@@ -271,9 +271,10 @@ sub read_configured_queues($) {
if ($printer->{SPOOLER} eq "cups") {
$printer->{OLD_QUEUE} = $QUEUES[$i]{queuedata}{queue};
my $descr = get_descr_from_ppd($printer);
- $descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/;
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1;
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2;
+ if ($descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/) {
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1;
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2;
+ }
# Read out which PPD file was originally used to set up this
# queue
local *F;
@@ -302,7 +303,7 @@ sub read_configured_queues($) {
# Fill in "options" field
if (my $args = $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args}) {
my @options;
- foreach my $arg (@{$args}) {
+ foreach my $arg (@$args) {
push(@options, "-o");
my $optstr = $arg->{name} . "=" . $arg->{default};
push(@options, $optstr);
@@ -332,17 +333,17 @@ sub make_menuentry {
my $connection;
if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) {
my $number = $2;
- $connection = N(" on parallel port \#%s", $number);
+ $connection = N(" on parallel port #%s", $number);
} elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) {
my $number = $2;
- $connection = N(", USB printer \#%s", $number);
+ $connection = N(", USB printer #%s", $number);
} elsif ($connect =~ m!^usb://!) {
$connection = N(", USB printer");
} elsif ($connect =~ m!^ptal:/(.+)$!) {
my $ptaldevice = $1;
if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
my $number = $1;
- $connection = N(", multi-function device on parallel port \#%s",
+ $connection = N(", multi-function device on parallel port #%s",
$number);
} elsif ($ptaldevice =~ /^mlc:usb:/) {
$connection = N(", multi-function device on USB");
@@ -520,7 +521,7 @@ sub read_printer_db(;$) {
$entry->{driver} = "raw";
$entry->{make} = "";
$entry->{model} = N("Unknown model");
- map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
+ $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} foreach keys %$entry;
#- Load CUPS driver database if CUPS is used as spooler
if ($spooler && $spooler eq "cups") {
@@ -716,24 +717,24 @@ sub read_location {
my ($cupsd_conf_ptr, $path) = @_;
- my @result = ();
- if (grep(m!^\s*<Location\s+$path\s*>!, @{$cupsd_conf_ptr})) {
+ my @result;
+ if (grep { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
my $location_start = -1;
my $location_end = -1;
# Go through all the lines, bail out when start and end line found
for (my $i = 0;
- ($i <= $#{$cupsd_conf_ptr}) and ($location_end == -1);
+ $i <= $#{$cupsd_conf_ptr} and $location_end == -1;
$i++) {
if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
# Start line of block
$location_start = $i;
- } elsif (($cupsd_conf_ptr->[$i] =~
- m!^\s*<\s*/Location\s*>!) and
- ($location_start != -1)) {
+ } elsif ($cupsd_conf_ptr->[$i] =~
+ m!^\s*<\s*/Location\s*>! &&
+ $location_start != -1) {
# End line of block
$location_end = $i;
last;
- } elsif (($location_start >= 0) and ($location_end < 0)) {
+ } elsif ($location_start >= 0 && $location_end < 0) {
# Inside the location block
push(@result, $cupsd_conf_ptr->[$i]);
}
@@ -759,20 +760,20 @@ sub rip_location {
my ($cupsd_conf_ptr, $path) = @_;
- my @location = ();
+ my @location;
my $location_start = -1;
my $location_end = -1;
- if (grep(m!^\s*<Location\s+$path\s*>!, @{$cupsd_conf_ptr})) {
+ if (grep { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
# Go through all the lines, bail out when start and end line found
for (my $i = 0;
- ($i <= $#{$cupsd_conf_ptr}) and ($location_end == -1);
+ $i <= $#{$cupsd_conf_ptr} and $location_end == -1;
$i++) {
if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
# Start line of block
$location_start = $i;
- } elsif (($cupsd_conf_ptr->[$i] =~
- m!^\s*<\s*/Location\s*>!) and
- ($location_start != -1)) {
+ } elsif ($cupsd_conf_ptr->[$i] =~
+ m!^\s*<\s*/Location\s*>! &&
+ $location_start != -1) {
# End line of block
$location_end = $i;
last;
@@ -780,7 +781,7 @@ sub rip_location {
}
# Rip out the block and store it seperately
@location =
- splice(@{$cupsd_conf_ptr},$location_start,
+ splice(@$cupsd_conf_ptr, $location_start,
$location_end - $location_start + 1);
} else {
# If there is no location block, create one
@@ -799,7 +800,7 @@ sub insert_location {
my ($cupsd_conf_ptr, $location_start, @location) = @_;
- splice(@{$cupsd_conf_ptr}, $location_start,0,@location);
+ splice(@$cupsd_conf_ptr, $location_start,0,@location);
}
sub add_to_location {
@@ -887,7 +888,7 @@ sub broadcastaddress {
$address =~ s/\*$/255.255/;
} elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) {
$address =~ s/\*$/255/;
- } elsif ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) {
+ } elsif ($address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$!) {
my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
my $mask = ((1 << $5) - 1) << (32 - $5);
my $broadcast = $numadr | (~$mask);
@@ -897,7 +898,7 @@ sub broadcastaddress {
(($broadcast & (255 << 8)) >> 8) . '.' .
($broadcast & 255);
} elsif ($address =~
- /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/) {
+ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!) {
my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8;
my $broadcast = $numadr | (~$mask);
@@ -931,9 +932,9 @@ sub localprintersshared {
my ($printer) = @_;
- return (($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) &&
- ($printer->{cupsconfig}{keys}{BrowseInterval} != 0) &&
- ($#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0));
+ return ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i &&
+ $printer->{cupsconfig}{keys}{BrowseInterval} != 0 &&
+ $#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0);
}
sub remotebroadcastsaccepted {
@@ -953,18 +954,18 @@ sub remotebroadcastsaccepted {
}
my $havedenyall =
- (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
- /All/im);
+ join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
+ /All/im;
my $havedenylocal =
- (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
- /\@LOCAL/im);
+ join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
+ /\@LOCAL/im;
my $orderallowdeny =
- ($printer->{cupsconfig}{keys}{BrowseOrder} =~
- /allow\s*,\s*deny/i);
+ $printer->{cupsconfig}{keys}{BrowseOrder} =~
+ /allow\s*,\s*deny/i;
my $haveallowremote = 0;
- for my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
+ foreach my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
next if
- ($allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i);
+ $allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i;
$haveallowremote = 1;
}
@@ -1018,7 +1019,7 @@ sub clientnetworks {
my $haveallowedhostwithoutbrowseaddress = 0;
my $haveallowedhostwithoutbrowseallow = 0;
# Go through all "Allow From" lines
- for my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) {
+ foreach my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) {
if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
# Line pointing to localhost
$haveallowfromlocalhost = 1;
@@ -1039,12 +1040,12 @@ sub clientnetworks {
}
my $havebrowseaddresswithoutallowedhost = 0;
# Go through all "BrowseAdress" lines
- for my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) {
+ foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) {
if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
# Skip lines pointing to localhost
} elsif ($line =~ /^\s*(none)\s*$/i) {
# Skip "Allow From None" lines
- } elsif (!member($line, map {broadcastaddress($_)} @sharehosts)) {
+ } elsif (!member($line, map { broadcastaddress($_) } @sharehosts)) {
# Line pointing to remote server
push(@sharehosts, networkaddress($line));
if ($printer->{cupsconfig}{localprintersshared}) {
@@ -1054,7 +1055,7 @@ sub clientnetworks {
}
my $havebrowseallowwithoutallowedhost = 0;
# Go through all "BrowseAllow" lines
- for my $line (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
+ foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
# Skip lines pointing to localhost
} elsif ($line =~ /^\s*(none)\s*$/i) {
@@ -1086,12 +1087,12 @@ sub makesharehostlist {
my @sharehostlist;
my %sharehosthash;
- for my $host (@{$printer->{cupsconfig}{clientnetworks}}) {
+ foreach my $host (@{$printer->{cupsconfig}{clientnetworks}}) {
if ($host =~ /\@LOCAL/i) {
$sharehosthash{$host} = N("Local network(s)");
} elsif ($host =~ /\@IF\((.*)\)/i) {
$sharehosthash{$host} = N("Interface \"%s\"", $1);
- } elsif ($host =~ /(\/|^\*|\*$|^\.)/) {
+ } elsif ($host =~ m!(/|^\*|\*$|^\.)!) {
$sharehosthash{$host} = N("Network %s", $host);
} else {
$sharehosthash{$host} = N("Host %s", $host);
@@ -1114,7 +1115,7 @@ sub makebrowsepolllist {
my @browsepolllist;
my %browsepollhash;
- for my $host (@{$printer->{cupsconfig}{BrowsePoll}}) {
+ foreach my $host (@{$printer->{cupsconfig}{BrowsePoll}}) {
my ($ip, $port);
if ($host =~ /^([^:]+):([^:]+)$/) {
$ip = $1;
@@ -1139,11 +1140,11 @@ sub is_network_ip {
my ($address) = @_;
- ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) ||
- ($address =~ /^(\d+\.){1,3}\*$/) ||
- ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) ||
- ($address =~
- /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/);
+ $address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/ ||
+ $address =~ /^(\d+\.){1,3}\*$/ ||
+ $address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$! ||
+ $address =~
+ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!;
}
@@ -1268,8 +1269,8 @@ sub write_cups_config {
'BrowseOrder Deny,Allow');
}
} else {
- if (($printer->{cupsconfig}{localprintersshared}) ||
- ($#{$printer->{cupsconfig}{BrowsePoll}} >= 0)) {
+ if ($printer->{cupsconfig}{localprintersshared} ||
+ $#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
# Deny all broadcasts, but leave all "BrowseAllow" lines
# untouched
handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
@@ -1296,10 +1297,10 @@ sub write_cups_config {
"Allow From 127.0.0.1\n" .
(@localips ?
"Allow From " .
- join("\nAllow From ", @localips).
+ join("\nAllow From ", @localips) .
"\n" : "") .
($printer->{cupsconfig}{localprintersshared} &&
- ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) ?
+ $#{$printer->{cupsconfig}{clientnetworks}} >= 0 ?
"Allow From " .
join("\nAllow From ",
grep {
@@ -1315,8 +1316,8 @@ sub write_cups_config {
if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
'BrowseAddress ' .
- join ("\nBrowseAddress ",
- map {broadcastaddress($_)}
+ join("\nBrowseAddress ",
+ map { broadcastaddress($_) }
@{$printer->{cupsconfig}{clientnetworks}}));
} else {
handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
@@ -1326,7 +1327,7 @@ sub write_cups_config {
if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
'BrowseAllow ' .
- join ("\nBrowseAllow ",
+ join("\nBrowseAllow ",
@{$printer->{cupsconfig}{clientnetworks}}));
} else {
handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
@@ -1338,7 +1339,7 @@ sub write_cups_config {
if ($#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
'BrowsePoll ' .
- join ("\nBrowsePoll ",
+ join("\nBrowsePoll ",
@{$printer->{cupsconfig}{BrowsePoll}}));
# "Browsing" must be on for "BrowsePoll" to work
handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
@@ -1381,7 +1382,7 @@ sub read_printers_conf {
chomp;
/^\s*#/ and next;
if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
- elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
+ elsif (m!\s*</Printer>!) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
}
@@ -1439,7 +1440,7 @@ sub ppd_entry_str {
} elsif ($descr =~ /Foomatic/i) {
$descr =~ s/Foomatic/GhostScript/i;
} elsif ($descr =~ /CUPS\+GIMP-print/i) {
- $descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/i;
+ $descr =~ s/CUPS\+GIMP-print/CUPS + GIMP-Print/i;
} elsif ($descr =~ /Series CUPS/i) {
$descr =~ s/Series CUPS/Series, CUPS/i;
} elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic)/i) {
@@ -1448,19 +1449,19 @@ sub ppd_entry_str {
# Split model and driver
$descr =~ s/\s*Series//i;
$descr =~ s/\((.*?(PostScript|PS.*).*?)\)/$1/i;
- if (($descr =~
- /^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i) ||
- ($descr =~
- /^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s*(Foomatic.*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s*(GhostScript.*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s*(CUPS.*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s+(PS.*)$/i) ||
- ($descr =~
- /^([^,]+[^,\s])\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s*(v\d+\.\d+.*)$/i) ||
- ($descr =~ /^([^,]+[^,\s])\s*,?\s*(PostScript.*)$/i) ||
- ($descr =~ /^([^,]+)\s*,?\s*(.+)$/)) {
+ if ($descr =~
+ /^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i ||
+ $descr =~
+ /^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s*(Foomatic.*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s*(GhostScript.*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s*(CUPS.*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s+(PS.*)$/i ||
+ $descr =~
+ /^([^,]+[^,\s])\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s*(v\d+\.\d+.*)$/i ||
+ $descr =~ /^([^,]+[^,\s])\s*,?\s*(PostScript.*)$/i ||
+ $descr =~ /^([^,]+)\s*,?\s*(.+)$/) {
$model = $1;
$driver = $2;
$model =~ s/[\-\s,]+$//;
@@ -1468,7 +1469,7 @@ sub ppd_entry_str {
$driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i;
$driver =~
s/^\s*(\(?v?\.?\s*\d\d\d\d\.\d\d\d\)?|v\d+\.\d+)([,\s]*)(.*?)\s*$/$3$2$1/i;
- $driver =~ s/,\s*\(/ \(/g;
+ $driver =~ s/,\s*\(/ (/g;
$driver =~ s/[\-\s,]+$//;
$driver =~ s/^[\-\s,]+//;
$driver =~ s/\s+/ /g;
@@ -1486,7 +1487,7 @@ sub ppd_entry_str {
# name (do not do this with manufacturer names which contain
# odd characters)
$model =~ s/^$mf[\s\-]+//i
- if ($mf and ($mf !~ /[\\\/\(\)\[\]\|\.\$\@\%\*\?]/));
+ if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
# Clean some manufacturer's names
$mf = clean_manufacturer_name($mf);
# Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the
@@ -1507,7 +1508,7 @@ sub ppd_entry_str {
# Try again to remove manufacturer's name from the beginning of the
# model name, this with the cleaned manufacturer name
$model =~ s/^$mf[\s\-]+//i
- if ($mf and ($mf !~ /[\\\/\(\)\[\]\|\.\$\@\%\*\?]/));
+ if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
# Put out the resulting description string
uc($mf) . '|' . $model . '|' . $driver .
($lang && " (" . lc(substr($lang, 0, 2)) . ")");
@@ -1552,9 +1553,9 @@ sub ppd_devid_data {
@content = cat_($ppd) or return ("", "");
}
my ($devidmake, $devidmodel);
- ($_ =~ /^\*Manufacturer:\s*\"(.*)\"\s*$/ and $devidmake = $1)
+ /^\*Manufacturer:\s*\"(.*)\"\s*$/ and $devidmake = $1
foreach @content;
- ($_ =~ /^\*Product:\s*\"\(?(.*?)\)?\"\s*$/ and $devidmodel = $1)
+ /^\*Product:\s*\"\(?(.*?)\)?\"\s*$/ and $devidmodel = $1
foreach @content;
return ($devidmake, $devidmodel);
}
@@ -1579,28 +1580,27 @@ sub poll_ppd_base {
if ($ppd eq "raw") { next }
$ppd && $mf && $descr and do {
my $key = ppd_entry_str($mf, $descr, $lang);
- $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/;
- my ($model, $driver) = ($1, $2);
+ my ($model, $driver) = ($1, $2) if $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/;
# Clean some manufacturer's names
$mf = clean_manufacturer_name($mf);
# Remove language tag
$driver =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//;
# Recommended Foomatic PPD? Extract "(recommended)"
my $isrecommended =
- ($driver =~ s/\s+\(recommended\)\s*$//i);
+ $driver =~ s/\s+\(recommended\)\s*$//i;
# Remove trailing white space
$driver =~ s/\s+$//;
# For Foomatic: Driver with "GhostScript + "
my $fullfoomaticdriver = $driver;
# Foomatic PPD? Extract driver name
my $isfoomatic =
- ($driver =~ s/^\s*(GhostScript|Foomatic)\s*\+\s*//i);
+ $driver =~ s/^\s*(GhostScript|Foomatic)\s*\+\s*//i;
# Foomatic PostScript driver?
- $isfoomatic ||= ($descr =~ /Foomatic/i);
+ $isfoomatic ||= $descr =~ /Foomatic/i;
# Native CUPS?
- my $isnativecups = ($driver =~ /CUPS/i);
+ my $isnativecups = $driver =~ /CUPS/i;
# Native PostScript
- my $isnativeps = (!$isfoomatic and !$isnativecups);
+ my $isnativeps = !$isfoomatic and !$isnativecups;
# Key without language tag (key as it was produced for the
# entries from the Foomatic XML database)
my $keynolang = $key;
@@ -1629,24 +1629,21 @@ sub poll_ppd_base {
# and the new entry is a "recommended" driver other
# then "Foomatic + Postscript"
if (defined($thedb{$key})) {
- next unless (lc($thedb{$key}{driver}) ne
- lc($driver));
- next unless (($isnativeps &&
- ($thedb{$key}{driver} =~
- /^PostScript$/i)) ||
- (($thedb{$key}{driver} ne "PPD") &&
- $isrecommended) ||
- (($thedb{$key}{driver} eq "PPD") &&
- ($driver ne "PostScript") &&
- $isrecommended));
+ next if lc($thedb{$key}{driver}) eq
+ lc($driver);
+ next unless $isnativeps &&
+ $thedb{$key}{driver} =~ /^PostScript$/i ||
+ $thedb{$key}{driver} ne "PPD" && $isrecommended ||
+ $thedb{$key}{driver} eq "PPD" && $isrecommended && $driver ne "PostScript";
+
# Remove the old entry
delete $thedb{$key};
}
- } elsif (((defined
- $thedb{"$mf|$model|$fullfoomaticdriver"}) ||
- (defined
- $thedb{"$mf|$model|$fullfoomaticdriver (recommended)"})) &&
- ($isfoomatic)) {
+ } elsif ((defined
+ $thedb{"$mf|$model|$fullfoomaticdriver"} ||
+ defined
+ $thedb{"$mf|$model|$fullfoomaticdriver (recommended)"}) &&
+ $isfoomatic) {
# Expert mode: There is already an entry for the
# same printer/driver combo produced by the
# Foomatic XML database, so do not make a second
@@ -1654,11 +1651,11 @@ sub poll_ppd_base {
next;
} elsif (defined
$thedb{"$mf|$model|PostScript (recommended)"} &&
- ($isnativeps)) {
+ $isnativeps) {
# Expert mode: "Foomatic + Postscript" driver is
# recommended and this is a PostScript PPD? Make
# this PPD the recommended one
- for (keys
+ foreach (keys
%{$thedb{"$mf|$model|PostScript (recommended)"}}) {
$thedb{"$mf|$model|PostScript"}{$_} =
$thedb{"$mf|$model|PostScript (recommended)"}{$_};
@@ -1668,7 +1665,7 @@ sub poll_ppd_base {
if (!$isrecommended) {
$key .= " (recommended)";
}
- } elsif (($driver =~ /PostScript/i) &&
+ } elsif ($driver =~ /PostScript/i &&
$isrecommended && $isfoomatic &&
(my @foundkeys = grep {
/^$mf\|$model\|/ && !/CUPS/i &&
@@ -1678,17 +1675,17 @@ sub poll_ppd_base {
# recommended and there was a PostScript PPD? Make
# the PostScript PPD the recommended one
my $firstfound = $foundkeys[0];
- if (!(grep {/\(recommended\)/} @foundkeys)) {
+ if (!(grep { /\(recommended\)/ } @foundkeys)) {
# Do it only if none of the native PostScript
# PPDs for this printer is already "recommended"
- for (keys %{$thedb{$firstfound}}) {
+ foreach (keys %{$thedb{$firstfound}}) {
$thedb{"$firstfound (recommended)"}{$_} =
$thedb{$firstfound}{$_};
}
delete $thedb{$firstfound};
}
$key =~ s/\s*\(recommended\)//;
- } elsif (($driver !~ /PostScript/i) &&
+ } elsif ($driver !~ /PostScript/i &&
$isrecommended && $isfoomatic &&
(my @foundkeys = grep {
/^$mf\|$model\|.*\(recommended\)/ &&
@@ -1702,7 +1699,7 @@ sub poll_ppd_base {
# Remove the "recommended" tag
my $destkey = $sourcekey;
$destkey =~ s/\s+\(recommended\)\s*$//i;
- for (keys %{$thedb{$sourcekey}}) {
+ foreach (keys %{$thedb{$sourcekey}}) {
$thedb{$destkey}{$_} = $thedb{$sourcekey}{$_};
}
delete $thedb{$sourcekey};
@@ -1787,10 +1784,10 @@ sub configure_queue($) {
# Check whether a USB printer is configured and activate USB printing if so
my $useUSB = 0;
foreach (values %{$printer->{configured}}) {
- $useUSB ||= (($_->{queuedata}{connect} =~ /usb/i) ||
- ($_->{DeviceURI} =~ /usb/i));
+ $useUSB ||= $_->{queuedata}{connect} =~ /usb/i ||
+ $_->{DeviceURI} =~ /usb/i;
}
- $useUSB ||= ($printer->{currentqueue}{connect} =~ /usb/i);
+ $useUSB ||= $printer->{currentqueue}{connect} =~ /usb/i;
if ($useUSB) {
my $f = "$::prefix/etc/sysconfig/usb";
my %usb = getVarsFromSh($f);
@@ -1853,11 +1850,11 @@ sub restart_queue($) {
# Restart the daemon(s)
for ($printer->{SPOOLER}) {
- /cups/ && do {
+ /cups/ and do {
#- restart cups.
printer::services::restart("cups");
last };
- /lpr|lprng/ && do {
+ /lpr|lprng/ and do {
#- restart lpd.
foreach ("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock") {
my $pidlpd = (cat_("$::prefix$_"))[0];
@@ -1922,8 +1919,7 @@ sub help_output {
open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . sprintf($spoolers{$spooler}{help}, $queue);
my $helptext = join("", <F>);
close F;
- $helptext = "Option list not available!\n"
- if (!$helptext || $helptext eq "");
+ $helptext ||= "Option list not available!\n";
return $helptext;
}
@@ -2031,7 +2027,7 @@ sub autodetectionentry_for_uri {
my $make = $1;
my $model = $2;
my $serial = $4;
- if ($make and $model) {
+ if ($make && $model) {
$make =~ s/\%20/ /g;
$model =~ s/\%20/ /g;
$serial =~ s/\%20/ /g;
@@ -2041,17 +2037,17 @@ sub autodetectionentry_for_uri {
my $smodel = handle_configs::searchstr($model);
foreach my $p (@autodetected) {
next if $p->{port} !~ /usb/i;
- next if ((!$p->{val}{MANUFACTURER} or
- ($p->{val}{MANUFACTURER} ne $make)) and
- (!$p->{val}{DESCRIPTION} or
- ($p->{val}{DESCRIPTION} !~ /^\s*$smake\s+/)));
- next if ((!$p->{val}{MODEL} or
- ($p->{val}{MODEL} ne $model)) and
- (!$p->{val}{DESCRIPTION} or
- ($p->{val}{DESCRIPTION} !~ /\s+$smodel\s*$/)));
- next if ($serial and
- (!$p->{val}{SERIALNUMBER} or
- ($p->{val}{SERIALNUMBER} ne $serial)));
+ next if ((!$p->{val}{MANUFACTURER} ||
+ $p->{val}{MANUFACTURER} ne $make) &&
+ (!$p->{val}{DESCRIPTION} ||
+ $p->{val}{DESCRIPTION} !~ /^\s*$smake\s+/));
+ next if ((!$p->{val}{MODEL} ||
+ $p->{val}{MODEL} ne $model) &&
+ (!$p->{val}{DESCRIPTION} ||
+ $p->{val}{DESCRIPTION} !~ /\s+$smodel\s*$/));
+ next if ($serial &&
+ (!$p->{val}{SERIALNUMBER} ||
+ $p->{val}{SERIALNUMBER} ne $serial));
return $p;
}
}
@@ -2062,18 +2058,17 @@ sub autodetectionentry_for_uri {
if ($ptaldevice =~ /^par:(\d+)$/) {
my $device = "/dev/lp$1";
foreach my $p (@autodetected) {
- next if (!$p->{port} or
- ($p->{port} ne $device));
+ next if !$p->{port} ||
+ $p->{port} ne $device;
return $p;
}
} else {
- $ptaldevice =~ /^usb:(.*)$/;
- my $model = $1;
+ my $model = $1 if $ptaldevice =~ /^usb:(.*)$/;
$model =~ s/_/ /g;
my $device = "";
foreach my $p (@autodetected) {
- next if (!$p->{val}{MODEL} or
- ($p->{val}{MODEL} ne $model));
+ next if !$p->{val}{MODEL} ||
+ $p->{val}{MODEL} ne $model;
return $p;
}
}
@@ -2083,8 +2078,8 @@ sub autodetectionentry_for_uri {
my $device = $uri;
$device =~ s/^(file|parallel|usb|serial)://;
foreach my $p (@autodetected) {
- next if (!$p->{port} or
- ($p->{port} ne $device));
+ next if !$p->{port} ||
+ $p->{port} ne $device;
return $p;
}
}
@@ -2113,14 +2108,14 @@ sub configure_hpoj {
while (<PTALINIT>) {
if (m!sub main!) {
last;
- } elsif (m!^[^\#]!) {
+ } elsif (m!^[^#]!) {
# Make the subroutines also working during installation
if ($::isInstall) {
s!\$::prefix!\$hpoj_prefix!g;
- s!prefix=\"/usr\"!prefix=\"$::prefix/usr\"!g;
- s!etcPtal=\"/etc/ptal\"!etcPtal=\"$::prefix/etc/ptal\"!g;
- s!varLock=\"/var/lock\"!varLock=\"$::prefix/var/lock\"!g;
- s!varRunPrefix=\"/var/run\"!varRunPrefix=\"$::prefix/var/run\"!g;
+ s!prefix="/usr"!prefix="$::prefix/usr"!g;
+ s!etcPtal="/etc/ptal"!etcPtal="$::prefix/etc/ptal"!g;
+ s!varLock="/var/lock"!varLock="$::prefix/var/lock"!g;
+ s!varRunPrefix="/var/run"!varRunPrefix="$::prefix/var/run"!g;
}
push @ptalinitfunctions, $_;
}
@@ -2165,12 +2160,11 @@ sub configure_hpoj {
if ($device =~ /usb/) {
$bus = "usb";
} elsif ($device =~ /par/ ||
- $device =~ /\/dev\/lp/ ||
+ $device =~ m!/dev/lp! ||
$device =~ /printers/) {
$bus = "par";
$address_arg = printer::detect::parport_addr($device);
- $address_arg =~ /^\s*-base\s+(\S+)/;
- eval "$base_address = $1";
+ eval "$base_address = $1" if $address_arg =~ /^\s*-base\s+(\S+)/;
} elsif ($device =~ /socket/) {
$bus = "hpjd";
$hostname = $model;
@@ -2442,13 +2436,12 @@ EOF
my $mtoolsfmconf;
if (-f "$::prefix/etc/mtoolsfm.conf") {
$mtoolsfmconf = cat_("$::prefix/etc/mtoolsfm.conf") or die "can't read MToolsFM config in $::prefix/etc/mtoolsfm.conf: $!";
- $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*\"([A-Za-z ]*)\"/m;
- my $alloweddrives = lc($1);
+ my $alloweddrives = lc($1) if $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*\"([A-Za-z ]*)\"/m;
foreach my $letter ("p", "q", "r", "s") {
$alloweddrives .= $letter if $alloweddrives !~ /$letter/;
}
- $mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*\"[A-Za-z ]*\"/DRIVES=\"$alloweddrives\"/m;
- $mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*\"[^\"]*\"/LEFTDRIVE=\"p\"/m;
+ $mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*"[A-Za-z ]*"/DRIVES="$alloweddrives"/m;
+ $mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*"[^"]*"/LEFTDRIVE="p"/m;
} else {
$mtoolsfmconf = <<'EOF';
# MToolsFM config file. comments start with a hash sign.
diff --git a/perl-install/printer/office.pm b/perl-install/printer/office.pm
index fb905107d..eccde17b5 100644
--- a/perl-install/printer/office.pm
+++ b/perl-install/printer/office.pm
@@ -44,8 +44,7 @@ sub configureoffice {
# Do we have Star Office installed?
my $configfilename = find_config_file($suite);
return 1 unless $configfilename;
- $configfilename =~ m!$suites->{$suite}{file_name}!;
- my $configprefix = $1;
+ my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!;
# Load Star Office printer config file
my $configfilecontent = cat_("$::prefix$configfilename");
# Update remote CUPS queues
@@ -53,7 +52,7 @@ sub configureoffice {
(-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) {
my @printerlist = printer::cups::get_remote_queues();
foreach my $listentry (@printerlist) {
- next unless ($listentry =~ /^([^\|]+)\|([^\|]+)$/);
+ next unless $listentry =~ /^([^\|]+)\|([^\|]+)$/;
my $queue = $1;
my $server = $2;
if (-x "$::prefix/usr/bin/wget") {
@@ -119,8 +118,7 @@ sub add_cups_remote_to_office {
# Do we have Star Office installed?
my $configfilename = find_config_file($suite);
return 1 unless $configfilename;
- $configfilename =~ m!$suites->{$suite}{file_name}!;
- my $configprefix = $1;
+ my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!;
# Load Star Office printer config file
my $configfilecontent = cat_("$::prefix$configfilename");
# Update remote CUPS queues
@@ -128,7 +126,7 @@ sub add_cups_remote_to_office {
(-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) {
my @printerlist = printer::cups::get_remote_queues();
foreach my $listentry (@printerlist) {
- next unless ($listentry =~ /^([^\|]+)\|([^\|]+)$/);
+ next unless $listentry =~ /^([^\|]+)\|([^\|]+)$/;
my $q = $1;
next if $q ne $queue;
my $server = $2;
@@ -169,8 +167,7 @@ sub remove_printer_from_office {
# Do we have Star Office installed?
my $configfilename = find_config_file($suite);
return 1 unless $configfilename;
- $configfilename =~ m!$suites->{$suite}{file_name}!;
- my $configprefix = $1;
+ my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!;
# Load Star Office printer config file
my $configfilecontent = cat_("$::prefix$configfilename");
# Remove the printer entry
@@ -186,8 +183,7 @@ sub remove_local_printers_from_office {
# Do we have Star Office installed?
my $configfilename = find_config_file($suite);
return 1 unless $configfilename;
- $configfilename =~ m!$suites->{$suite}{file_name}!;
- my $configprefix = $1;
+ my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!;
# Load Star Office printer config file
my $configfilecontent = cat_("$::prefix$configfilename");
# Remove the printer entries
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 25aff729f..bb1f4887b 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -229,15 +229,15 @@ If some of these measures lead to problems for you, turn this option off, but th
messages => N("Choose the network or host on which the local printers should be made available:"),
callbacks => {
complete => sub {
- if (($hostchoice eq
- N("IP address of host/network:")) &&
+ if ($hostchoice eq
+ N("IP address of host/network:") &&
$ip =~ /^\s*$/) {
$in->ask_warn('', N("Host/network IP address missing."));
return (1,1);
}
- if (($hostchoice eq
- N("IP address of host/network:")) &&
+ if ($hostchoice eq
+ N("IP address of host/network:") &&
!printer::main::is_network_ip($ip)) {
$in->ask_warn('',
@@ -257,7 +257,7 @@ N("Examples for correct IPs:\n") .
$address = $ip;
} else {
($address) =
- grep {$hostchoice =~ /$_/}
+ grep { $hostchoice =~ /$_/ }
@interfaces;
$address = "\@IF($address)";
}
@@ -287,7 +287,7 @@ N("Examples for correct IPs:\n") .
disabled => sub {
$hostchoice ne
N("IP address of host/network:");
- }},
+ } },
],
)) {
# OK was clicked, insert new item into the list
@@ -296,9 +296,9 @@ N("Examples for correct IPs:\n") .
$address);
} else {
@{$printer->{cupsconfig}{clientnetworks}} =
- map {($_ eq
+ map { ($_ eq
$sharehosts->{invhash}{$choice} ?
- $address : $_)}
+ $address : $_) }
@{$printer->{cupsconfig}{clientnetworks}};
}
# Refresh list of hosts
@@ -312,7 +312,7 @@ N("Examples for correct IPs:\n") .
}
} elsif ($buttonclicked eq "remove") {
@{$printer->{cupsconfig}{clientnetworks}} =
- grep {$_ ne $sharehosts->{invhash}{$choice}}
+ grep { $_ ne $sharehosts->{invhash}{$choice} }
@{$printer->{cupsconfig}{clientnetworks}};
# Refresh list of hosts
$sharehosts =
@@ -462,9 +462,9 @@ N("Examples for correct IPs:\n") .
$address);
} else {
@{$printer->{cupsconfig}{BrowsePoll}} =
- map {($_ eq
+ map { ($_ eq
$browsepoll->{invhash}{$choice} ?
- $address : $_)}
+ $address : $_) }
@{$printer->{cupsconfig}{BrowsePoll}};
}
# Refresh list of hosts
@@ -476,7 +476,7 @@ N("Examples for correct IPs:\n") .
}
} elsif ($buttonclicked eq "remove") {
@{$printer->{cupsconfig}{BrowsePoll}} =
- grep {$_ ne $browsepoll->{invhash}{$choice}}
+ grep { $_ ne $browsepoll->{invhash}{$choice} }
@{$printer->{cupsconfig}{BrowsePoll}};
# Refresh list of hosts
$browsepoll =
@@ -686,7 +686,7 @@ sub configure_new_printers {
$queue =~ s/(\d)$/$1_/;
my $i = 1;
while ($printer->{configured}{"$queue$i"}) {
- $i ++;
+ $i++;
}
$queue .= $i;
}
@@ -716,7 +716,7 @@ sub configure_new_printers {
$printer->{DBENTRY} = N("Raw printer (No driver)");
# Info about what was detected
my $info = N("(") . if_($p->{val}{DESCRIPTION},
- $p->{val}{DESCRIPTION} . N(" on ")).
+ $p->{val}{DESCRIPTION} . N(" on ")) .
$p->{port} . N(")");
# Remove wait message
undef $_w;
@@ -740,7 +740,7 @@ Printerdrake could not determine which model your printer %s is. Please choose t
$queue =~ s/(\d)$/$1_/;
my $i = 1;
while ($printer->{configured}{"$queue$i"}) {
- $i ++;
+ $i++;
}
$queue .= $i;
}
@@ -764,7 +764,7 @@ Printerdrake could not determine which model your printer %s is. Please choose t
}
}
# Delete some variables
- foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)){
+ foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)) {
$printer->{$_} = "";
}
$printer->{currentqueue} = {};
@@ -935,9 +935,9 @@ sub setup_local_autoscan {
if ($p->{val}{DESCRIPTION}) {
my $menustr = $p->{val}{DESCRIPTION};
if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
- $menustr .= N(" on parallel port \#%s", $1);
+ $menustr .= N(" on parallel port #%s", $1);
} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr .= N(", USB printer \#%s", $1);
+ $menustr .= N(", USB printer #%s", $1);
} elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
$menustr .= N(", network printer \"%s\", port %s", $1, $2);
} elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
@@ -949,9 +949,9 @@ sub setup_local_autoscan {
} else {
my $menustr;
if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
- $menustr = N("Printer on parallel port \#%s", $1);
+ $menustr = N("Printer on parallel port #%s", $1);
} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr = N("USB printer \#%s", $1);
+ $menustr = N("USB printer #%s", $1);
} elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
$menustr .= N("Network printer \"%s\", port %s", $1, $2);
} elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
@@ -972,9 +972,9 @@ sub setup_local_autoscan {
}
my $menustr;
if ($q =~ m!^/dev/lp(\d+)$!) {
- $menustr = N("Printer on parallel port \#%s", $1);
+ $menustr = N("Printer on parallel port #%s", $1);
} elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr = N("USB printer \#%s", $1);
+ $menustr = N("USB printer #%s", $1);
}
$menustr .= " ($q)" if $::expert;
$menuentries->{$menustr} = $q;
@@ -989,10 +989,10 @@ sub setup_local_autoscan {
$printer->{MORETHANONE} = $#autodetected > 0;
my $m;
for ($m = 0; $m <= 2; $m++) {
- my $menustr = N("Printer on parallel port \#%s", $m);
+ my $menustr = N("Printer on parallel port #%s", $m);
$menustr .= " (/dev/lp$m)" if $::expert;
$menuentries->{$menustr} = "/dev/lp$m";
- $menustr = N("USB printer \#%s", $m);
+ $menustr = N("USB printer #%s", $m);
$menustr .= " (/dev/usb/lp$m)" if $::expert;
$menuentries->{$menustr} = "/dev/usb/lp$m";
}
@@ -1009,7 +1009,7 @@ sub setup_local_autoscan {
if ($secondinlist && !$firstinlist) { return 1 };
}
return $first cmp $second;
- } keys(%{$menuentries});
+ } keys(%$menuentries);
my $menuchoice = "";
my $oldmenuchoice = "";
my $device;
@@ -1147,9 +1147,10 @@ sub setup_lpd {
if ($printer->{configured}{$queue} &&
$printer->{currentqueue}{connect} =~ m/^lpd:/) {
$uri = $printer->{currentqueue}{connect};
- $uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
- $remotehost = $1;
- $remotequeue = $2;
+ if ($uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!) {
+ $remotehost = $1;
+ $remotequeue = $2;
+ }
} else {
$remotehost = "";
$remotequeue = "lp";
@@ -1218,8 +1219,7 @@ sub setup_smb {
if ($printer->{configured}{$queue} &&
$printer->{currentqueue}{connect} =~ m/^smb:/) {
$uri = $printer->{currentqueue}{connect};
- $uri =~ m!^\s*smb://(.*)$!;
- my $parameters = $1;
+ my $parameters = $1 if $uri =~ m!^\s*smb://(.*)$!;
# Get the user's login and password from the URI
if ($parameters =~ m!([^@]*)@([^@]+)!) {
my $login = $1;
@@ -1268,9 +1268,10 @@ sub setup_smb {
@autodetected = printer::detect::net_smb_detect();
foreach my $p (@autodetected) {
my $menustr;
- $p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!;
- my $server = $1;
- my $share = $2;
+ if ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
+ my $server = $1;
+ my $share = $2;
+ }
if ($p->{val}{DESCRIPTION}) {
$menustr = $p->{val}{DESCRIPTION};
$menustr .= N(", printer \"%s\" on server \"%s\"",
@@ -1287,7 +1288,7 @@ sub setup_smb {
}
@menuentrieslist = sort {
$menuentries->{$a} cmp $menuentries->{$b};
- } keys(%{$menuentries});
+ } keys(%$menuentries);
if ($printer->{configured}{$queue} &&
$printer->{currentqueue}{connect} =~ m/^smb:/ &&
$menuchoice eq "") {
@@ -1308,10 +1309,11 @@ sub setup_smb {
$autodetect = 0;
} elsif ($menuchoice eq "") {
$menuchoice = $menuentrieslist[0];
- $menuentries->{$menuentrieslist[0]} =~
- m!^smb://([^/:]+)/([^/:]+)$!;
- $smbserver = $1;
- $smbshare = $2;
+ if ($menuentries->{$menuentrieslist[0]} =~
+ m!^smb://([^/:]+)/([^/:]+)$!) {
+ $smbserver = $1;
+ $smbshare = $2;
+ }
}
$oldmenuchoice = $menuchoice;
}
@@ -1373,9 +1375,10 @@ Do you really want to continue setting up this printer as you are doing now?"),
changed => sub {
return 0 if !$autodetect;
if ($oldmenuchoice ne $menuchoice) {
- $menuentries->{$menuchoice} =~ m!^smb://([^/:]+)/([^/:]+)$!;
- $smbserver = $1;
- $smbshare = $2;
+ if ($menuentries->{$menuchoice} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
+ $smbserver = $1;
+ $smbshare = $2;
+ }
$oldmenuchoice = $menuchoice;
}
return 0;
@@ -1504,9 +1507,10 @@ sub setup_socket {
@autodetected = printer::detect::net_detect();
foreach my $p (@autodetected) {
my $menustr;
- $p->{port} =~ m!^socket://([^:]+):(\d+)$!;
- my $host = $1;
- my $port = $2;
+ if ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
+ my $host = $1;
+ my $port = $2;
+ }
if ($p->{val}{DESCRIPTION}) {
$menustr = $p->{val}{DESCRIPTION};
$menustr .= N(", host \"%s\", port %s",
@@ -1522,7 +1526,7 @@ sub setup_socket {
}
@menuentrieslist = sort {
$menuentries->{$a} cmp $menuentries->{$b};
- } keys(%{$menuentries});
+ } keys(%$menuentries);
if ($printer->{configured}{$queue} &&
$printer->{currentqueue}{connect} =~ m!^(socket:|ptal:/hpjd:)! &&
$menuchoice eq "") {
@@ -1543,9 +1547,10 @@ sub setup_socket {
$autodetect = 0;
} elsif ($menuchoice eq "") {
$menuchoice = $menuentrieslist[0];
- $menuentries->{$menuentrieslist[0]} =~ m!^socket://([^:]+):(\d+)$!;
- $remotehost = $1;
- $remoteport = $2;
+ if ($menuentries->{$menuentrieslist[0]} =~ m!^socket://([^:]+):(\d+)$!) {
+ $remotehost = $1;
+ $remoteport = $2;
+ }
}
$oldmenuchoice = $menuchoice;
}
@@ -1571,10 +1576,11 @@ sub setup_socket {
changed => sub {
return 0 if !$autodetect;
if ($oldmenuchoice ne $menuchoice) {
- $menuentries->{$menuchoice} =~ m!^socket://([^:]+):(\d+)$!;
- $remotehost = $1;
- $remoteport = $2;
- $oldmenuchoice = $menuchoice;
+ if ($menuentries->{$menuchoice} =~ m!^socket://([^:]+):(\d+)$!) {
+ $remotehost = $1;
+ $remoteport = $2;
+ }
+ $oldmenuchoice = $menuchoice;
}
return 0;
}
@@ -1724,8 +1730,7 @@ sub setup_postpipe {
if ($printer->{configured}{$queue} &&
$printer->{currentqueue}{connect} =~ m/^postpipe:/) {
$uri = $printer->{currentqueue}{connect};
- $uri =~ m!^\s*postpipe:\"(.*)\"$!;
- $commandline = $1;
+ $commandline = $1 if $uri =~ m!^\s*postpipe:\"(.*)\"$!;
} else {
$commandline = "";
}
@@ -1759,7 +1764,7 @@ sub setup_common {
my $ptaldevice = "";
my $isHPOJ = 0;
my $_w;
- if ($device =~ /^\/dev\// || $device =~ /^socket:\/\//) {
+ if ($device =~ m!^/dev/! || $device =~ m!^socket://!) {
# Ask user whether he has a multi-function device when he didn't
# do auto-detection or when auto-detection failed
my $searchunknown = N("Unknown model");
@@ -1782,7 +1787,7 @@ sub setup_common {
/usr/bin/xojpanel))) {
$_w = $in->wait_message(N("Printerdrake"),
N("Installing HPOJ package..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
$in->do_pkgs->install('hpoj', 'xojpanel');
}
# Configure and start HPOJ
@@ -1790,7 +1795,7 @@ sub setup_common {
$_w = $in->wait_message
(N("Printerdrake"),
N("Checking device and configuring HPOJ..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
$ptaldevice = printer::main::configure_hpoj
($device, @autodetected);
@@ -1811,7 +1816,7 @@ sub setup_common {
$_w = $in->wait_message
(N("Printerdrake"),
N("Installing SANE packages..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
$in->do_pkgs->install('sane-backends',
'sane-frontends',
'xsane', 'libsane-hpoj0',
@@ -1837,7 +1842,7 @@ sub setup_common {
$_w = $in->wait_message
(N("Printerdrake"),
N("Installing mtools packages..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
$in->do_pkgs->install('mtools', 'mtoolsfm');
}
# Configure mtools/MToolsFM for photo card access
@@ -1872,7 +1877,7 @@ sub setup_common {
$_w = $in->wait_message
(N("Printerdrake"),
N("Checking device and configuring HPOJ..."))
- if (!$printer->{noninteractive} && !defined($_w));
+ if !$printer->{noninteractive} && !defined($_w);
} else {
# make the DeviceURI from $device.
$printer->{currentqueue}{connect} = $device;
@@ -1909,16 +1914,16 @@ sub setup_common {
my $_w = $in->wait_message
(N("Printerdrake"),
N("Making printer port available for CUPS..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
printer::main::assure_device_is_available_for_cups($ptaldevice ||
$device);
}
#- Read the printer driver database if necessary
- if ((keys %printer::main::thedb) == 0) {
+ if (keys %printer::main::thedb == 0) {
my $_w = $in->wait_message
(N("Printerdrake"), N("Reading printer database..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
printer::main::read_printer_db($printer->{SPOOLER});
}
@@ -1938,14 +1943,14 @@ sub setup_common {
$descr = "$descrmake|$automodel";
} else {
$descr = $autodescr;
- $descr =~ s/ /\|/;
+ $descr =~ s/ /|/;
}
# Remove manufacturer's name from the beginning of the
# description (do not do this with manufacturer names which
# contain odd characters)
- $descr =~ s/^$descrmake\|\s*$descrmake\s*/$descrmake\|/i
- if ($descrmake and
- ($descrmake !~ /[\\\/\(\)\[\]\|\.\$\@\%\*\?]/));
+ $descr =~ s/^$descrmake\|\s*$descrmake\s*/$descrmake|/i
+ if $descrmake &&
+ $descrmake !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
# Clean up the description from noise which makes the best match
# difficult
$descr =~ s/\s+[Ss]eries//i;
@@ -2019,7 +2024,7 @@ sub setup_common {
$matched = 0;
}
}
- if ($matched && ($des || ($mfg && $mdl))) {
+ if ($matched && ($des || $mfg && $mdl)) {
# Full match to known auto-detection data
$printer->{DBENTRY} = $entry;
$matchlength = 1000;
@@ -2033,8 +2038,7 @@ sub setup_common {
# Foomatic database or of thr PPD file
my $dbmakemodel;
if ($::expert) {
- $entry =~ m/^(.*)\|[^\|]*$/;
- $dbmakemodel = $1;
+ $dbmakemodel = $1 if $entry =~ m/^(.*)\|[^\|]*$/;
} else {
$dbmakemodel = $entry;
}
@@ -2068,7 +2072,7 @@ sub setup_common {
if (!member($descr, @badsearchterms)) {
my $searchterm = $descr;
my $lsearchterm = length($searchterm);
- $searchterm =~ s/([\\\/\(\)\[\]\|\.\$\@\%\*\?])/\\$1/g;
+ $searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g;
if ($lsearchterm > $matchlength &&
$dbmakemodel =~ m!$searchterm!i) {
$matchlength = $lsearchterm;
@@ -2078,7 +2082,7 @@ sub setup_common {
if (!member($dbmakemodel, @badsearchterms)) {
my $searchterm = $dbmakemodel;
my $lsearchterm = length($searchterm);
- $searchterm =~ s/([\\\/\(\)\[\]\|\.\$\@\%\*\?])/\\$1/g;
+ $searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g;
if ($lsearchterm > $matchlength &&
$descr =~ m!$searchterm!i) {
$matchlength = $lsearchterm;
@@ -2093,8 +2097,7 @@ sub setup_common {
bestMatchSentence($descr, keys %printer::main::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
- $printer->{DBENTRY} =~ /^([^\|]+)\|/;
- my $guessedmake = lc($1);
+ my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/;
if ($guessedmake !~ /Generic/i &&
$descr !~ /$guessedmake/i &&
($guessedmake ne "hp" ||
@@ -2155,15 +2158,15 @@ N("Every printer needs a name (for example \"printer\"). The Description and Loc
sub get_db_entry {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
- if ((keys %printer::main::thedb) == 0) {
+ if (keys %printer::main::thedb == 0) {
my $_w = $in->wait_message(N("Printerdrake"),
N("Reading printer database..."))
- if (!$printer->{noninteractive});
+ if $printer->{noninteractive};
printer::main::read_printer_db($printer->{SPOOLER});
}
my $_w = $in->wait_message(N("Printerdrake"),
N("Preparing printer database..."))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
my $queue = $printer->{OLD_QUEUE};
if ($printer->{configured}{$queue}) {
# The queue was already configured
@@ -2211,9 +2214,10 @@ sub get_db_entry {
} elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
my $makemodel =
printer::main::get_descr_from_ppd($printer);
- $makemodel =~ m!^([^\|]+)\|([^\|]+)(|\|.*)$!;
- $make = $1;
- $model = $2;
+ if ($makemodel =~ m!^([^\|]+)\|([^\|]+)(|\|.*)$!) {
+ $make = $1;
+ $model = $2;
+ }
}
foreach my $key (keys %printer::main::thedb) {
if ($::expert &&
@@ -2243,8 +2247,7 @@ sub get_db_entry {
bestMatchSentence($matchstr, keys %printer::main::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
- $printer->{DBENTRY} =~ /^([^\|]+)\|/;
- my $guessedmake = lc($1);
+ my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/;
if ($matchstr !~ /$guessedmake/i &&
($guessedmake ne "hp" ||
$matchstr !~ /Hewlett[\s-]+Packard/i))
@@ -2299,7 +2302,7 @@ sub choose_model {
my ($printer, $in) = @_;
# $in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
- if ((keys %printer::main::thedb) == 0) {
+ if (keys %printer::main::thedb == 0) {
my $_w = $in->wait_message(N("Printerdrake"),
N("Reading printer database..."));
printer::main::read_printer_db($printer->{SPOOLER});
@@ -2444,14 +2447,15 @@ sub get_printer_info {
return 0;
}
# Set device permissions
- $printer->{currentqueue}{connect} =~
- /^\s*(file|parallel|usb):(\S*)\s*$/;
- if ($printer->{SPOOLER} eq 'cups') {
- set_permissions($2, '660', 'lp', 'sys');
- } elsif ($printer->{SPOOLER} eq 'pdq') {
- set_permissions($2, '666');
- } else {
- set_permissions($2, '660', 'lp', 'lp');
+ if ($printer->{currentqueue}{connect} =~
+ /^\s*(file|parallel|usb):(\S*)\s*$/) {
+ if ($printer->{SPOOLER} eq 'cups') {
+ set_permissions($2, '660', 'lp', 'sys');
+ } elsif ($printer->{SPOOLER} eq 'pdq') {
+ set_permissions($2, '666');
+ } else {
+ set_permissions($2, '660', 'lp', 'lp');
+ }
}
# This is needed to have the device not blocked by the
# spooler backend.
@@ -2597,10 +2601,10 @@ You should make sure that the page size and the ink type/printing mode (if avail
my $optshortdefault = $printer->{ARGS}[$i]{default};
# Should the option only show when the "Advanced" button was
# clicked?
- my $advanced = ((defined($printer->{ARGS}[$i]{group}) and
+ my $advanced = ((defined($printer->{ARGS}[$i]{group}) &&
($printer->{ARGS}[$i]{group} !~
- /^(|General|.*install.*)$/i)) or
- (!($printer->{ARGS}[$i]{group}) and
+ /^(|General|.*install.*)$/i)) ||
+ (!($printer->{ARGS}[$i]{group}) &&
!member($printer->{ARGS}[$i]{name},
@simple_options)) ? 1 : 0);
# Group header
@@ -2685,15 +2689,13 @@ You should make sure that the page size and the ink type/printing mode (if avail
}
} elsif ($printer->{currentqueue}{ppd}) {
if ($printer->{DBENTRY}) {
- $printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
- $driver = $1;
+ $driver = $1 if $printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
} else {
$driver = printer::main::get_descr_from_ppd($printer);
if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
$driver = "PPD";
} else {
- $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
- $driver = $1;
+ $driver = $1 if $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
}
}
}
@@ -2704,8 +2706,8 @@ You should make sure that the page size and the ink type/printing mode (if avail
}
# Do not show the options setup dialog when installing a new printer
# in recommended mode without "Manual configuration" turned on.
- if ((!$printer->{NEW} or $::expert or $printer->{MANUAL}) and
- (!$printer->{noninteractive})) {
+ if ((!$printer->{NEW} || $::expert || $printer->{MANUAL}) &&
+ !$printer->{noninteractive}) {
return 0 if !$in->ask_from(
$windowtitle,
N("Printer default settings"),
@@ -2852,11 +2854,11 @@ Note: the photo test page can take a rather long time to get printed and on lase
$in->do_pkgs->install('ImageMagick');
}
# set up list of pages to print
- $options{standard} && push @testpages, $stdtestpage;
- $options{altletter} && push @testpages, $altlttestpage;
- $options{alta4} && push @testpages, $alta4testpage;
- $options{photo} && push @testpages, $phototestpage;
- $options{ascii} && push @testpages, $asciitestpage;
+ $options{standard} and push @testpages, $stdtestpage;
+ $options{altletter} and push @testpages, $altlttestpage;
+ $options{alta4} and push @testpages, $alta4testpage;
+ $options{photo} and push @testpages, $phototestpage;
+ $options{ascii} and push @testpages, $asciitestpage;
# print the stuff
@lpq_output = printer::main::print_pages($printer, @testpages);
}
@@ -2948,7 +2950,7 @@ N("This command you can also use in the \"Printing command\" field of the printi
(!$raw ?
N("
The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $scanning . $photocard . $hp11000fw: $scanning . $photocard . $hp11000fw);
+N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $scanning . $photocard . $hp11000fw : $scanning . $photocard . $hp11000fw);
} elsif ($spooler eq "lpd") {
$dialogtext =
N("To print a file from the command line (terminal window) use the command \"%s <file>\".
@@ -3469,7 +3471,7 @@ sub configure_queue {
my $_w = $in->wait_message(N("Printerdrake"),
N("Configuring printer \"%s\"...",
$printer->{currentqueue}{queue}))
- if (!$printer->{noninteractive});
+ if !$printer->{noninteractive};
$printer->{complete} = 1;
my $retval = printer::main::configure_queue($printer);
$printer->{complete} = 0;
@@ -3568,7 +3570,7 @@ sub main {
# Get the default printer (Done before non-interactive queue setup,
# so that former default is not lost)
assure_default_printer_is_set($printer, $in);
- my $nodefault = (!$printer->{DEFAULT});
+ my $nodefault = !$printer->{DEFAULT};
# Non-interactive setup of newly detected printers (This is done
# only when not in expert mode, so we always have a spooler defined
@@ -3596,7 +3598,7 @@ sub main {
# Main loop: During installation we only enter it when the user has
# clicked on the "Configure" button in the "Summary" step. We do not
# call it during the preparation of the "Summary" screen.
- if (!$::isInstall || ($install_step == 1)) {
+ if (!$::isInstall || $install_step == 1) {
# Ask for a spooler when none is defined yet
$printer->{SPOOLER} ||=
@@ -3745,16 +3747,16 @@ sub main {
my $spooler =
$spoolers{$printer->{SPOOLER}}{short_name};
if ($::expert) {
- map {
+ foreach (keys(%{$printer->{configured}})) {
$printer->{configured}{$_}{queuedata}{menuentry} =~
s/^/$spooler!/;
- } keys(%{$printer->{configured}});
+ }
$cursorpos =~ s/^/$spooler!/;
} else {
- map {
+ foreach (keys(%{$printer->{configured}})) {
$printer->{configured}{$_}{queuedata}{menuentry} =~
s/^$spooler!//;
- } keys(%{$printer->{configured}});
+ }
$cursorpos =~ s/^$spooler!//;
}
next;
@@ -3843,14 +3845,14 @@ sub main {
goto step_0;
};
step_3:
- if ($::expert or $printer->{MANUAL} or
+ if ($::expert || $printer->{MANUAL} ||
$printer->{MORETHANONE}) {
choose_printer_name($printer, $in) or
goto step_2;
}
get_db_entry($printer, $in);
step_3_9:
- if (!$::expert and !$printer->{MANUAL}) {
+ if (!$::expert && !$printer->{MANUAL}) {
is_model_correct($printer, $in) or do {
goto step_3 if $printer->{MORETHANONE};
goto step_2;
@@ -3859,7 +3861,7 @@ sub main {
step_4:
# Remember DB entry for "Previous" button in wizard
my $dbentry = $printer->{DBENTRY};
- if ($::expert or $printer->{MANUAL} or
+ if ($::expert || $printer->{MANUAL} ||
$printer->{MANUALMODEL}) {
choose_model($printer, $in) or do {
# Restore DB entry
@@ -3900,15 +3902,15 @@ sub main {
wizard_welcome($printer, $in, $upNetwork) or next;
!$::expert or choose_printer_type($printer, $in) or next;
setup_printer_connection($printer, $in, $upNetwork) or next;
- if ($::expert or $printer->{MANUAL} or
+ if ($::expert || $printer->{MANUAL} ||
$printer->{MORETHANONE}) {
choose_printer_name($printer, $in) or next;
}
get_db_entry($printer, $in);
- if (!$::expert and !$printer->{MANUAL}) {
+ if (!$::expert && !$printer->{MANUAL}) {
is_model_correct($printer, $in) or next;
}
- if ($::expert or $printer->{MANUAL} or
+ if ($::expert || $printer->{MANUAL} ||
$printer->{MANUALMODEL}) {
choose_model($printer, $in) or next;
}
@@ -3939,21 +3941,21 @@ sub main {
# Here we must regenerate the menu entry, because the
# parameters can be changed.
printer::main::make_menuentry($printer,$queue);
- $printer->{configured}{$queue}{queuedata}{menuentry} =~
- /!([^!]+)$/;
- $infoline = $1 .
- ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') .
- ($printer->{configured}{$queue}{queuedata}{desc} ?
- ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') .
- ($printer->{configured}{$queue}{queuedata}{loc} ?
- ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') .
- ($::expert ?
- ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : '');
+ if ($printer->{configured}{$queue}{queuedata}{menuentry} =~
+ /!([^!]+)$/) {
+ $infoline = $1 .
+ ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') .
+ ($printer->{configured}{$queue}{queuedata}{desc} ?
+ ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') .
+ ($printer->{configured}{$queue}{queuedata}{loc} ?
+ ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') .
+ ($::expert ?
+ ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : '');
+ }
} else {
# The parameters of a remote CUPS queue cannot be
# changed, so we can simply take the menu entry.
- $cursorpos =~ /!([^!]+)$/;
- $infoline = $1;
+ $infoline = $1 if $cursorpos =~ /!([^!]+)$/;
}
if ($in->ask_from_(
{ title => N("Modify printer configuration"),
@@ -4106,8 +4108,8 @@ What do you want to modify on this printer?",
} else {
my $s1 = N(" (Default)");
my $s2 = $s1;
- $s2 =~ s/\(/\\\(/;
- $s2 =~ s/\)/\\\)/;
+ $s2 =~ s/\(/\\(/;
+ $s2 =~ s/\)/\\)/;
$cursorpos .= $s1 if $printer->{QUEUE} eq $printer->{DEFAULT} && $cursorpos !~ /$s2/;
}
}
@@ -4122,7 +4124,7 @@ What do you want to modify on this printer?",
undef $_w;
}
# Delete some variables
- foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)){
+ foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)) {
$printer->{$_} = "";
}
$printer->{currentqueue} = {};
diff --git a/perl-install/printer/services.pm b/perl-install/printer/services.pm
index 1b68da96a..adb2587fe 100644
--- a/perl-install/printer/services.pm
+++ b/perl-install/printer/services.pm
@@ -39,7 +39,7 @@ sub start_not_running_service ($) {
}
}
-sub wait_for_cups {
+sub wait_for_cups() {
# CUPS needs some time to come up. Wait up to 30 seconds, checking
# whether CUPS is ready.
my $cupsready = 0;