diff options
Diffstat (limited to 'move/move.pm')
| -rw-r--r-- | move/move.pm | 711 |
1 files changed, 0 insertions, 711 deletions
diff --git a/move/move.pm b/move/move.pm deleted file mode 100644 index 2d072deed..000000000 --- a/move/move.pm +++ /dev/null @@ -1,711 +0,0 @@ -package move; # $Id$ $ - -#- Copyright (c) 2003 MandrakeSoft -#- -#- This program is free software; you can redistribute it and/or modify -#- it under the terms of the GNU General Public License as published by -#- the Free Software Foundation; either version 2, or (at your option) -#- any later version. -#- -#- This program is distributed in the hope that it will be useful, -#- but WITHOUT ANY WARRANTY; without even the implied warranty of -#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#- GNU General Public License for more details. -#- -#- You should have received a copy of the GNU General Public License -#- along with this program; if not, write to the Free Software -#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -use diagnostics; -use strict; - -use modules; -use common; -use fs; -use fsedit; -use run_program; -use partition_table qw(:types); -use swap; -use log; -use lang; -use Digest::MD5 qw(md5_hex); - -my $key_disabled; - -my ($using_existing_user_config, $using_existing_host_config); -my $key_sysconf = '/home/.sysconf'; -my $virtual_key_part; -my $key_mountopts = 'umask=077,uid=501,gid=501,shortname=mixed,nobadchars'; - -sub symlinkf_short { - my ($dest, $file) = @_; - if (my $l = readlink $dest) { - $dest = $l if $l =~ m!^/!; - } - -d $file and log::l("$file already exists and is a directory! writing in directory may be needed, not overwriting"), return; - symlinkf($dest, $file); -} - -sub handle_etcfiles { - my (@allowed_modes) = @_; - #- non-trivial files listed from tools/scan-etc.pl - foreach (chomp_(cat_('/image/move/etcfiles'))) { - my $mode if 0; - m|^# (\S+)| and $mode = $1; - m|^/| && member($mode, @allowed_modes) and do { - $mode eq 'READ' && !-e $_ and symlinkf_short("/image$_", $_); - if ($mode eq 'OVERWRITE') { - mkdir_p(dirname($_)); - run_program::run('cp', "/image$_", $_); #- need copy contents - } - $mode eq 'DIR' and mkdir_p $_; - } - } - -} - -sub handle_virtual_key() { - return if $key_disabled; - if (my ($device, $file, $options) = cat_('/proc/cmdline') =~ /\bvirtual_key=([^,\s]+),([^,\s]+)(,\S+)?/) { - log::l("using device=$device file=$file as a virtual key with options $options"); - my $dir = '/virtual_key_mount'; - mkdir $dir; - run_program::run('mount', $device, $dir); - $options =~ /format/ and run_program::run('mkdosfs', "$dir$file"); - require devices; - my $loop = devices::find_free_loop(); - run_program::run('losetup', $loop, "$dir$file"); - run_program::run('mount', $loop, '/home', '-o', $key_mountopts); - $virtual_key_part = { device => $loop, mntpoint => '/home', type => 0xc, isMounted => 1 }; - } -} - -sub setup_userconf { - my ($o) = @_; - if (!@{$o->{users}} && `getent passwd 501` =~ /([^:]+):/) { - log::l("passwd/501 is $1"); - $o->{users} = [ { name => $1 } ]; - $ENV{HOME} = "/home/$1"; #- used by lang::read() :-/ - print "using existing user configuration\n"; - $using_existing_user_config = 1; - } -} - -#- run very soon at stage2 start, setup things on tmpfs rw / that -#- were not necessary to start stage2 itself (there were setup -#- by stage1 of course) -sub init { - my ($o) = @_; - - $::testing and goto drakx_stuff; - - #- rw things - mkdir "/$_" foreach qw(home mnt root root/tmp etc var); - - mkdir "/etc/$_" foreach qw(X11); - touch '/etc/modules.conf'; - touch '/etc/modprobe.conf'; - symlinkf "/proc/mounts", "/etc/mtab"; - - #- these files need be writable but we need a sensible first contents - run_program::run('cp', "/image/etc/$_", '/etc') foreach qw(passwd passwd- group sudoers fstab); - - #- these files are typically opened in read-write mode, we need them copied - mkdir_p("/etc/$_"), run_program::run('cp', '-R', glob_("/image/etc/$_/*"), "/etc/$_") - foreach qw(cups profile.d sysconfig devfs/conf.d); - - #- directories we badly need as non-links because files will be written in - handle_etcfiles('DIR'); - - #- for /etc/sysconfig/networking/ifcfg-lo - mkdir "/etc/sysconfig/networking"; - - #- ro things - symlinkf_short("/image/etc/$_", "/etc/$_") - foreach qw(alternatives man.config services shells pam.d security inputrc ld.so.conf - DIR_COLORS bashrc profile init.d devfsd.conf gtk-2.0 pango fonts modules.devfs - dynamic hotplug gnome-vfs-2.0 gnome-vfs-mime-magic gtk gconf menu menu-methods nsswitch.conf default login.defs - skel ld.so.cache openoffice xinetd.d xinetd.conf syslog.conf sysctl.conf sysconfig/networking/ifcfg-lo - ifplugd); - symlinkf_short("/image/etc/X11/$_", "/etc/X11/$_") - foreach qw(encodings.dir app-defaults applnk fs lbxproxy proxymngr rstart wmsession.d xinit xkb xserver xsm); - symlinkf_short("/image/root/$_", "/root/$_") foreach qw(.bashrc); - - mkdir_p(dirname("/var/$_")), symlinkf_short("/image/var/$_", "/var/$_") foreach qw(lib/samba lib/rpm cache/gstreamer-0.6); - - #- non-trivial files/directories that need be readable, files that will be overwritten - handle_etcfiles('READ', 'OVERWRITE'); - - #- create remaining /etc and /var subdirectories if not already copied or symlinked, - #- because programs most often won't try to create the missing subdir before trying - #- to write a file, leading to obscure unexpected failures - foreach (cat_('/image/move/directories-to-create')) { - my ($mode, $uid, $gid, $name) = split; - next if -d $name; - mkdir($name); - chmod(oct($mode), $name); - chown($uid, $gid, $name); - } - - chmod 01777, '/tmp', '/var/tmp'; #- /var/tmp -> badly needed for printing from OOo - - #- remaining non existent /etc files are symlinked from the RO volume, - #- better to have them RO than non existent. - #- PB: problems arise when programs try to open then in O_WRONLY - #- or O_RDWR -> in that case, they should be handled in the - #- OVERWRITE section of data/etcfiles) - foreach (chomp_(cat_('/image/move/all-etcfiles'))) { - -f $_ or symlinkf_short("/image$_", $_); - } - - #- free up stage1 memory - eval { fs::umount('/stage1/proc/bus/usb') }; - fs::umount($_) foreach qw(/stage1/proc /stage1); - - #- devfsd needed for devices accessed by old names - fs::mount("none", "/dev", "devfs", 0); - fs::mount("none", "/dev/pts", "devpts", 0); - run_program::run('/sbin/devfsd', '/dev'); - - -d '/lib/modules/' . c::kernel_version() or warn("ERROR: kernel package " . c::kernel_version() . " not installed\n"), c::_exit(1); - - $key_disabled = !-e '/cdrom/live_tree_nvidia.clp' && cat_('/proc/mounts') !~ /nfs/; - - run_program::run('/sbin/service', 'syslog', 'start'); - run_program::run('sysctl', '-w', 'kernel.hotplug=/bin/true'); - modules::load_category('bus/usb'); - eval { modules::load('usb-storage', 'sd_mod') }; - handle_virtual_key(); - $o->{pcmcia} ||= !$::noauto && c::pcmcia_probe(); - cat_('/proc/cmdline') =~ /\bwaitkey\b/ and sleep 15; - install_steps::setupSCSI($o); - run_program::run('sysctl', '-w', 'kernel.hotplug=/sbin/hotplug'); - - key_mount($o); - cat_('/proc/cmdline') =~ /\bcleankey\b/ and eval { rm_rf $key_sysconf, glob_('/home/.mdkmove*') }; - key_installfiles('simple'); - setup_userconf($o); - if (-f '/etc/X11/X') { - print "using existing host configuration\n"; - $using_existing_host_config = 1; - - #- so that /etc/devfsd/conf.d/mouse.conf is used and /dev/mouse created - run_program::run('/sbin/service', 'devfsd', 'reload'); - } - if (-s '/etc/sysconfig/i18n') { - lang::set($o->{locale} = lang::read('', 0)); #- read ~/.i18n first if it exists - install2::handleI18NClp(); - } - - touch '/var/run/rebootctl'; - -drakx_stuff: - $o->{steps}{$_} = { reachable => 1, text => $_ } - foreach qw(initGraphical autoSelectLanguage handleI18NClp verifyKey configMove startMove); - $o->{orderedSteps_orig} = $o->{orderedSteps}; - $o->{orderedSteps} = [ $using_existing_host_config ? - qw(initGraphical verifyKey startMove) - : $using_existing_user_config ? - qw(initGraphical autoSelectLanguage verifyKey selectMouse selectKeyboard configMove startMove) - : qw(initGraphical selectLanguage handleI18NClp acceptLicense verifyKey selectMouse selectKeyboard configMove startMove) ]; - $o->{steps}{first} = $o->{orderedSteps}[0]; - - #- don't use shadow passwords since pwconv overwrites /etc/shadow hence contents will be lost for usb key - delete $o->{authentication}{shadow}; - -} - -sub lomount_clp { - my ($name, $needed_file) = @_; - my ($clp, $dir) = ("/cdrom/live_tree_$name.clp", "/image_$name"); - - -e "$dir$needed_file" and return; - - if (! -e $clp || cat_('/proc/cmdline') =~ /\blive\b/) { - symlink "/cdrom/live_tree_$name", $dir; - return; - } - - log::l("lomount_clp: lomounting $name"); - - mkdir_p($dir); - my $dev = devices::find_free_loop(); - run_program::run('losetup', '-r', '-e', 'gz', $dev, $clp); - run_program::run('mount', '-r', $dev, $dir); -} - -sub install2::autoSelectLanguage { - my $o = $::o; - - install_steps::selectLanguage($o); -} - -sub install2::handleI18NClp { - my $o = $::o; - - lomount_clp("always_i18n_$o->{locale}{lang}", '/usr'); -} - -sub key_parts { - my ($o) = @_; - - return () if $key_disabled; - - my @keys = grep { detect_devices::isKeyUsb($_) } @{$o->{all_hds}{hds}}; - (fsedit::get_fstab(@keys), grep { detect_devices::isKeyUsb($_) } @{$o->{all_hds}{raw_hds}}); -} - -sub key_mount { - my ($o, $o_reread) = @_; - - if ($o_reread) { - $o->{all_hds} = fsedit::empty_all_hds(); - install_any::getHds($o, $o); - } - if ($virtual_key_part) { - #- :/ merge_from_mtab didn't got my virtual key, need to add it manually - push @{$o->{fstab}}, $virtual_key_part; - } - - require fs; - each_index { - $_->{mntpoint} = $::i ? "/mnt/key$::i" : '/home'; - $_->{options} = $key_mountopts; - eval { fs::mount_part($_); 1 } or delete $_->{mntpoint}; - } key_parts($o); -} - -sub key_umount { - my ($o) = @_; - eval { fs::umount_part($_) foreach key_parts($o); 1 }; -} - -sub machine_ident() { - #- , c::get_hw_address('eth0'); before detect of network :( - md5_hex(join '', (map { (split)[1] } cat_('/proc/bus/pci/devices'))); -} - -sub key_installfiles { - my ($mode) = @_; - - my $done if 0; - $done and return; - - mkdir $key_sysconf; - my $sysconf = "$key_sysconf/" . machine_ident(); - - my $copy_userinfo = sub { - my (@files) = @_; - my @etcpasswords = glob("$key_sysconf/*/etc/passwd"); - if (@etcpasswords > 1) { - print "inconsistency: more than one /etc/passwd on key! can't proceed, please clean the key\n"; - exit 1; - } - return if !@etcpasswords; - my ($path) = $etcpasswords[0] =~ m|(.*)/etc/passwd|; - run_program::run('cp', '-f', "$path$_", $_) foreach @files; - run_program::run('rm', '-f', $etcpasswords[0]); - }; - - if (!-d $sysconf) { - if ($mode eq 'full') { - log::l("key_installfiles: installing config files in $sysconf"); - mkdir $sysconf; - foreach (chomp_(cat_('/image/move/keyfiles'))) { - my $target_dir = $sysconf . dirname($_); - mkdir_p($target_dir); - if (/\*$/) { - run_program::run('cp', glob_($_), $target_dir); - symlinkf("$sysconf$_", $_) foreach glob($_); - } else { - run_program::run('cp', $_, "$sysconf$_"); - symlinkf("$sysconf$_", $_); - } - } - run_program::run('cp', '/image/move/README.adding.more.files', $key_sysconf); - $done = 1; - } else { - #- not in full mode and no host directory, grab user config from first existing host directory if possible - log::l("key_installfiles: only looking for user config files"); - $copy_userinfo->(qw(/etc/passwd /etc/group /etc/sysconfig/i18n)); - } - } else { - log::l("key_installfiles: installing symlinks to key"); - if (!-e "$sysconf/etc/passwd") { - log::l("key_installfiles: /etc/passwd not here, trying to copy from previous host boot"); - $copy_userinfo->(qw(/etc/passwd /etc/group)); - } - foreach (chomp_(`find $sysconf -type f`)) { - my ($path) = /^\Q$sysconf\E(.*)/; - mkdir_p(dirname($path)); - symlinkf($_, $path); - } - $done = 1; - $::o->{steps}{configMove}{done} = 1; - } - - #- /etc/sudoers can't be a link - unlink($_), run_program::run('cp', "/image$_", $_) foreach qw(/etc/sudoers); -} - -sub reboot() { - output('/var/run/rebootctl', "reboot"); #- tell X_move to not respawn - run_program::run('killall', 'X'); #- kill it ourselves to be sure that it won't lock console when killed by our init - exit 0; -} - -sub install2::verifyKey { - my ($o) = $::o; - - log::l("automatic transparent key support is disabled"), return if $key_disabled; - - while (cat_('/proc/mounts') !~ m|\s/home\s|) { - - my $message = key_parts($o) ? -N("Your USB key doesn't have any valid Windows (FAT) partitions. -We need one to continue (beside, it's more standard so that you -will be able to move and access your files from machines -running Windows). Please plug in an USB key containing a -Windows partition instead. - - -You may also proceed without an USB key - you'll still be -able to use Mandrake Move as a normal live Mandrake -Operating System.") : -N("We didn't detect any USB key on your system. If you -plug in an USB key now, Mandrake Move will have the ability -to transparently save the data in your home directory and -system wide configuration, for next boot on this computer -or another one. Note: if you plug in a key now, wait several -seconds before detecting again. - - -You may also proceed without an USB key - you'll still be -able to use Mandrake Move as a normal live Mandrake -Operating System."); - $o->ask_okcancel_({ title => N("Need a key to save your data"), - messages => formatAlaTeX($message), - ok => N("Detect USB key again"), - cancel => N("Continue without USB key") }) or return; - - key_mount($o, 'reread'); - } - - local *F; - while (!open F, '>/home/.touched') { - - if (!key_umount($o)) { - #- this case happens when the user boots with a write-protected key containing - #- all user and host data, /etc/X11/X which is on key busyfies it - $o->ask_okcancel_({ title => N("Key isn't writable"), - messages => formatAlaTeX( -N("The USB key seems to have write protection enabled, but we can't safely -unplug it now. - - -Click the button to reboot the machine, unplug it, remove write protection, -plug the key again, and launch Mandrake Move again.")), - ok => N("Reboot") }); - reboot(); - } - - modules::unload('usb-storage'); #- it won't notice change on write protection otherwise :/ - - $o->ask_okcancel_({ title => N("Key isn't writable"), - messages => formatAlaTeX( -N("The USB key seems to have write protection enabled. Please -unplug it, remove write protection, and then plug it again.")), - ok => N("Retry"), - cancel => N("Continue without USB key") }) or return; - - modules::load('usb-storage'); - sleep 2; - key_mount($o, 'reread'); - } - close F; - unlink '/home/.touched'; - - my $_wait = $using_existing_host_config - || $o->wait_message(N("Setting up USB key"), N("Please wait, setting up system configuration files on USB key...")); - key_installfiles('full'); - - setup_userconf($o); -} - -sub enable_service { - run_program::run('/sbin/chkconfig', '--level', 5, $_[0], 'on'); -} - -sub install2::configMove { - my $o = $::o; - - #- just in case - lomount_clp("always_i18n_$o->{locale}{lang}", '/usr'); - - if (!$using_existing_user_config) { - if (cat_('/proc/cmdline') =~ /\buser=(\w+)/) { - $o->{users} = [ { name => $1 } ]; - } else { - require any; - any::ask_user_one($o, $o->{users} ||= [], $o->{security}, - additional_msg => N("Enter your user information, password will be used for screensaver"), noaccept => 1, needauser => 1, noicons => 1); - } - #- force uid/gid to 501 as it was used when mounting key, addUser may choose 502 when key already holds user data - put_in_hash($o->{users}[0], { uid => 501, gid => 501 }); - require install_steps; - install_steps::addUser($o); - } - - $::noauto and goto after_autoconf; - - my $_wait = $o->wait_message(N("Auto configuration"), N("Please wait, detecting and configuring devices...")); - - #- automatic printer, timezone, network configs - require install_steps_interactive; - if (cat_('/proc/mounts') !~ /nfs/) { - install_steps_interactive::configureNetwork($o); - enable_service('network'); - } - enable_service('netfs'); - install_steps_interactive::summaryBefore($o); - - modules::load_category('multimedia/sound'); - enable_service('sound'); - - detect_devices::isLaptop() or enable_service('numlock'); - -after_autoconf: - require timezone; - timezone::write($o->{timezone}); - - $o->{useSupermount} = 1; - fs::set_removable_mntpoints($o->{all_hds}); - fs::set_all_default_options($o->{all_hds}, %$o, lang::fs_options($o->{locale})); - - require install_any; - install_any::write_fstab($o); - - modules::write_conf(); - require mouse; - mouse::write_conf($o, $o->{mouse}, 1); #- write xfree mouse conf - detect_devices::install_addons(''); - - { - my $user = $o->{users}[0]{name}; - my $confdir = "/home/$user/.kde/share/config"; - mkdir_p($confdir); - output("$confdir/kdeglobals", cat_("/usr/share/config/kdeglobals")); - lang::configure_kdeglobals($o->{locale}, $confdir); - - run_program::run('chown', '-R', "$user.$user", "/home/$user/.kde"); - } - - foreach my $step (@{$o->{orderedSteps_orig}}) { - next if member($step, @{$o->{orderedSteps}}); - while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) { - log::l("doing remaining toBeDone for undone step $step"); - eval { &$f() }; - $o->ask_warn(N("Error"), [ -N("An error occurred, but I don't know how to handle it nicely. -Continue at your own risk."), formatError($@) ]) if $@; - } - } -} - -sub install_TrueFS_in_home { - my ($o) = @_; - - require fsedit; - my $home = fsedit::mntpoint2part('/home', $o->{fstab}) or return; - - my %loopbacks = map { - my $part = { - type => 0x83, - device => "/home/.mdkmove-$_", - loopback_file => "/.mdkmove-$_", loopback_device => $home, - mntpoint => "/home/$_/.mdkmove-truefs", size => 6 << 11, - toFormat => ! -e "/home/.mdkmove-$_", - }; - $_ => $part; - } list_users(); - $home->{loopback} = [ values %loopbacks ]; - fsedit::recompute_loopbacks($o->{all_hds}); - fs::formatMount_all([], $home->{loopback}, $o->{prefix}); - - foreach my $user (keys %loopbacks) { - my $dir = $loopbacks{$user}{mntpoint}; - - foreach (qw(.kde .openoffice)) { - if (-d "/home/$user/$_" && ! -d "$dir/$_") { - run_program::run('mv', "/home/$user/$_", "$dir/$_"); - } - mkdir $_ foreach "/home/$user/$_", "$dir/$_"; - - run_program::run('mount', '-o', 'bind', "$dir/$_", "/home/$user/$_"); - } - - my $cache = "/tmp/.$user-cache"; - foreach (qw(.kde/share/cache)) { - mkdir_p("$cache/$_"); - mkdir_p("/home/$user/" . dirname($_)); - symlink "$cache/$_", "/home/$user/$_"; - } - run_program::run('chown', '-R', "$user.$user", $dir); - run_program::run('chown', '-R', "$user.$user", $cache); - - $ENV{XAUTHORITY} = "$dir/.Xauthority"; - $ENV{ICEAUTHORITY} = "$dir/.ICEauthority"; - } -} - -sub errorInStep { - my ($o, $err) = @_; - - if (!fsedit::mntpoint2part('/home', $o->{fstab})) { - $o->ask_warn(N("Error"), [ N("An error occurred"), formatError($err) ]); - return; - } - - $o->ask_okcancel_({ title => N("Error"), - messages => formatAlaTeX( -N("An error occurred: - - -%s - -This may come from corrupted system configuration files -on the USB key, in this case removing them and then -rebooting Mandrake Move would fix the problem. To do -so, click on the corresponding button. - - -You may also want to reboot and remove the USB key, or -examine its contents under another OS, or even have -a look at log files in console #3 and #4 to try to -guess what's happening.", formatError($err))), - ok => N("Remove system config files"), - cancel => N("Simply reboot") }) or goto reboot; - eval { rm_rf $key_sysconf }; -reboot: - reboot(); -} - -sub install2::initGraphical { - my $xdim = $::rootwidth; - $xdim < 800 and $xdim = 800; - $xdim > 1600 and $xdim = 1600; - run_program::run('qiv', '--root', "/image/move/BOOT-$xdim-MOVE.jpg"); - - *install_steps_interactive::errorInStep = \&errorInStep; -} - -sub install2::startMove { - my $o = $::o; - - $::WizardWindow->destroy if $::WizardWindow; - require ugtk2; - ugtk2::flush(); - - #- get info from existing fstab. This won't do anything if we already wrote fstab in configMove - fs::get_info_from_fstab($o->{all_hds}, ''); - foreach (fsedit::get_really_all_fstab($o->{all_hds})) { - if (isSwap($_)) { - eval { swap::swapon($_->{device}) }; - } elsif ($_->{mntpoint} && !$_->{isMounted} && !$::noauto) { - mkdir_p($_->{mntpoint}); - run_program::run('mount', $_->{mntpoint}); - } - } - - symlinkf("/usr/share/services/ksycoca-$o->{locale}{lang}", '/etc/X11/ksycoca'); - - install_TrueFS_in_home($o); - - my $username = $o->{users}[0]{name}; - output('/var/run/console.lock', $username); - output("/var/run/console/$username", 1); - run_program::run('pam_console_apply'); - - run_program::run('chown', "$username.root", '/var/run/rebootctl'); - - touch '/var/run/utmp'; - run_program::run('runlevel_set', '5'); - foreach (glob('/etc/rc.d/rc5.d/*')) { - next if member($_, qw(xfs dm devfsd syslog)); - next if /~$/; - run_program::run($_, 'start'); - } - - #- allow user customisation of startup through /etc/rc.d/rc.local - run_program::run('/etc/rc.d/rc.local'); - - if (cat_('/proc/mounts') =~ m|\s/home\s|) { - output '/var/lib/machine_ident', machine_ident(); - run_program::run('/usr/bin/etc-monitorer.pl', uniq map { dirname($_) } (chomp_(`find /etc -type f`), - grep { readlink($_) !~ m|^/| } chomp_(`find /etc -type l`))); - run_program::raw({ detach => 1 }, '/usr/bin/dnotify', '-MCRD', '/etc', '-r', '-e', '/usr/bin/etc-monitorer.pl', '{}') or die "dnotify not found!"; - } - - #- password in screensaver doesn't make sense if we keep the shell - if (cat_('/proc/cmdline') !~ /\bshell\b/) { - kill 9, cat_('/var/run/drakx_shell.pid'); - output('/dev/tty2', "Killed\n"); - } - - if (fork()) { - sleep 1; - log::l("DrakX waves bye-bye"); - - open STDOUT, ">>/tmp/.kde-errors"; #- don't display startkde shit on first console - open STDERR, ">>/tmp/.kde-errors"; - - my (undef, undef, $uid, $gid, undef, undef, undef, $home, $shell) = getpwnam($username); - $( = $) = "$gid $gid"; - $< = $> = $uid; - $ENV{LOGNAME} = $ENV{USER} = $username; - $ENV{HOME} = $home; - $ENV{SHELL} = $shell; - $ENV{XDM_MANAGED} = '/var/run/rebootctl,maysd,mayfn,sched'; #- for reboot/halt availability of "logout" by kde - $ENV{GDMSESSION} = 1; #- disable ~/.xsession-errors in Xsession (waste of usb key writes) - $ENV{LD_LIBRARY_PATH} = "$home/lib"; - chdir $home; - exec 'startkde_move'; - } else { - exec 'xwait', '-permanent' or c::_exit(0); - } -} - -sub automatic_xconf { - my ($o) = @_; - - if (!$using_existing_host_config) { - - log::l('automatic XFree configuration'); - - any::devfssymlinkf($o->{mouse}, 'mouse'); - local $o->{mouse}{device} = 'mouse'; - - require Xconfig::default; - $o->{raw_X} = Xconfig::default::configure({ KEYBOARD => 'uk' }, $o->{mouse}); #- using uk instead of us for now to have less warnings - - require Xconfig::main; - require class_discard; - Xconfig::main::configure_everything_auto_install($o->{raw_X}, class_discard->new, {}, - { allowNVIDIA_rpms => sub { [] }, allowATI_rpms => sub { [] }, allowFB => $o->{allowFB} }); - } - - modules::load_category('various/agpgart'); - - my $file = '/etc/X11/XF86Config'; - $file = "$file-4" if -e "$file-4"; - my ($Driver) = cat_($file) =~ /Section "Device".*Driver\s*"(.*?)"/s; - if ($Driver eq 'nvidia') { - modules::load('nvidia'); - lomount_clp('nvidia', '/usr/lib/libGLcore.so.1'); - } - my $lib = 'libGL.so.1'; - symlinkf_short(-e "/usr/lib/$lib.$Driver" ? "/usr/lib/$lib.$Driver" : "/usr/X11R6/lib/$lib", "/etc/X11/$lib"); -} - - -1; |