diff options
Diffstat (limited to 'mdk-stage1/ppp/pppdump/zlib.h')
| -rw-r--r-- | mdk-stage1/ppp/pppdump/zlib.h | 631 |
1 files changed, 0 insertions, 631 deletions
diff --git a/mdk-stage1/ppp/pppdump/zlib.h b/mdk-stage1/ppp/pppdump/zlib.h deleted file mode 100644 index 9c7ac734d..000000000 --- a/mdk-stage1/ppp/pppdump/zlib.h +++ /dev/null @@ -1,631 +0,0 @@ -/* $Id$ */ - -/* - * This file is derived from zlib.h and zconf.h from the zlib-0.95 - * distribution by Jean-loup Gailly and Mark Adler, with some additions - * by Paul Mackerras to aid in implementing Deflate compression and - * decompression for PPP packets. - */ - -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 0.95, Aug 16th, 1995. - - Copyright (C) 1995 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu - */ - -#ifndef _ZLIB_H -#define _ZLIB_H - -/* #include "zconf.h" */ /* included directly here */ - -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ - -/* - The library does not install any signal handler. It is recommended to - add at least a handler for SIGSEGV when decompressing; the library checks - the consistency of the input data whenever possible but may go nuts - for some forms of corrupted input. - */ - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints - * at addresses which are not a multiple of their size. - * Under DOS, -DFAR=far or -DFAR=__far may be needed. - */ - -#ifndef STDC -# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) -# define STDC -# endif -#endif - -#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ -# include <unix.h> -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -#ifndef FAR -# define FAR -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - 1 << (windowBits+2) + 1 << (memLevel+9) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -typedef unsigned char Byte; /* 8 bits */ -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -typedef Byte FAR Bytef; -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -/* end of original zconf.h */ - -#define ZLIB_VERSION "0.95P" - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms may be added later and will have the same - stream interface. - - For compression the application must provide the output buffer and - may optionally provide the input buffer for optimization. For decompression, - the application must provide the input buffer and may optionally provide - the output buffer for optimization. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidp opaque; /* private data object passed to zalloc and zfree */ - - Byte data_type; /* best guess about the data type: ascii or binary */ - -} z_stream; - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_FULL_FLUSH 2 -#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ -#define Z_FINISH 4 -#define Z_PACKET_FLUSH 5 -/* See deflate() below for the usage of these constants */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -/* error codes for the compression/decompression functions */ - -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 - -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 -/* Used to set the data_type field */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -extern char *zlib_version; -/* The application can compare zlib_version and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - */ - - /* basic functions */ - -extern int deflateInit OF((z_stream *strm, int level)); -/* - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9: - 1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests - a default compromise between speed and compression (currently equivalent - to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level. - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -extern int deflate OF((z_stream *strm, int flush)); -/* - Performs one or both of the following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). - - If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression - block is terminated and flushed to the output buffer so that the - decompressor can get all input data available so far. For method 9, a future - variant on method 8, the current block will be flushed but not terminated. - If flush is set to Z_FULL_FLUSH, the compression block is terminated, a - special marker is output and the compression dictionary is discarded; this - is useful to allow the decompressor to synchronize if one compressed block - has been damaged (see inflateSync below). Flushing degrades compression and - so should be used only when necessary. Using Z_FULL_FLUSH too often can - seriously degrade the compression. If deflate returns with avail_out == 0, - this function must be called again with the same value of the flush - parameter and more output space (updated avail_out), until the flush is - complete (deflate returns with non-zero avail_out). - - If the parameter flush is set to Z_PACKET_FLUSH, the compression - block is terminated, and a zero-length stored block is output, - omitting the length bytes (the effect of this is that the 3-bit type - code 000 for a stored block is output, and the output is then - byte-aligned). This is designed for use at the end of a PPP packet. - In addition, if the current compression block contains all the data - since the last Z_PACKET_FLUSH, it is never output as a stored block. - If the current compression block output as a static or dynamic block - would not be at least `minCompression' bytes smaller than the - original data, then nothing is output for that block. (The type - code for the zero-length stored block is still output, resulting in - a single zero byte being output for the whole packet.) - `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit - is used. - - If the parameter flush is set to Z_FINISH, all pending input is processed, - all pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - 0.1% larger than avail_in plus 12 bytes. If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. -*/ - - -extern int deflateEnd OF((z_stream *strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent. In the error case, msg may be set - but then points to a static string (which must not be deallocated). -*/ - - -extern int inflateInit OF((z_stream *strm)); -/* - Initializes the internal stream state for decompression. The fields - zalloc and zfree must be initialized before by the caller. If zalloc and - zfree are set to Z_NULL, inflateInit updates them to use default allocation - functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory. msg is set to null if there is no error message. - inflateInit does not perform any decompression: this will be done by - inflate(). -*/ - - -extern int inflate OF((z_stream *strm, int flush)); -/* - Performs one or both of the following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() always provides as much output as possible - (until there is no more input data or no more space in the output buffer). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). - - If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, - inflate flushes as much output as possible to the output buffer. The - flushing behavior of inflate is not specified for values of the flush - parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the - current implementation actually flushes as much output as possible - anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data - has been consumed, it is expecting to see the length field of a stored - block; if not, it returns Z_DATA_ERROR. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. - - inflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if the end of the - compressed data has been reached and all uncompressed output has been - produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if - the stream structure was inconsistent (for example if next_in or next_out - was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no - progress is possible or if there was not enough room in the output buffer - when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then - call inflateSync to look for a good compression block. */ - - -extern int inflateEnd OF((z_stream *strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -extern int deflateInit2 OF((z_stream *strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy, - int minCompression)); -/* - This is another version of deflateInit with more compression options. The - fields next_in, zalloc and zfree must be initialized before by the caller. - - The method parameter is the compression method. It must be 8 in this - version of the library. (Method 9 will allow a 64K history buffer and - partial block flushes.) - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library (the value 16 will be allowed for method 9). Larger - values of this parameter result in better compression at the expense of - memory usage. The default value is 15 if deflateInit is used instead. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use - the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data - produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman - encoding only (no string match). Filtered data consists mostly of small - values with a somewhat random distribution. In this case, the - compression algorithm is tuned to compress them better. The strategy - parameter only affects the compression ratio but not the correctness of - the compressed output even if it is not set appropriately. - - The minCompression parameter specifies the minimum reduction in size - required for a compressed block to be output when Z_PACKET_FLUSH is - used (see the description of deflate above). - - If next_in is not null, the library will use this buffer to hold also - some history information; the buffer must either hold the entire input - data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in - is null, the library will allocate its own history buffer (and leave next_in - null). next_out need not be provided here but must be provided by the - application for the next call of deflate(). - - If the history buffer is provided by the application, next_in must - must never be changed by the application since the compressor maintains - information inside this buffer from call to call; the application - must provide more input only by increasing avail_in. next_in is always - reset by the library in this case. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - an invalid method). msg is set to null if there is no error message. - deflateInit2 does not perform any compression: this will be done by - deflate(). -*/ - -extern int deflateCopy OF((z_stream *dest, - z_stream *source)); -/* - Sets the destination stream as a complete copy of the source stream. If - the source stream is using an application-supplied history buffer, a new - buffer is allocated for the destination stream. The compressed output - buffer is always application-supplied. It's the responsibility of the - application to provide the correct values of next_out and avail_out for the - next call of deflate. - - This function is useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -extern int deflateReset OF((z_stream *strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -extern int inflateInit2 OF((z_stream *strm, - int windowBits)); -/* - This is another version of inflateInit with more compression options. The - fields next_out, zalloc and zfree must be initialized before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library (the value 16 will be allowed soon). The - default value is 15 if inflateInit is used instead. If a compressed stream - with a larger window size is given as input, inflate() will return with - the error code Z_DATA_ERROR instead of trying to allocate a larger window. - - If next_out is not null, the library will use this buffer for the history - buffer; the buffer must either be large enough to hold the entire output - data, or have at least 1<<windowBits bytes. If next_out is null, the - library will allocate its own buffer (and leave next_out null). next_in - need not be provided here but must be provided by the application for the - next call of inflate(). - - If the history buffer is provided by the application, next_out must - never be changed by the application since the decompressor maintains - history information inside this buffer from call to call; the application - can only reset next_out to the beginning of the history buffer when - avail_out is zero and all output has been consumed. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - windowBits < 8). msg is set to null if there is no error message. - inflateInit2 does not perform any decompression: this will be done by - inflate(). -*/ - -extern int inflateSync OF((z_stream *strm)); -/* - Skips invalid compressed data until the special marker (see deflate() - above) can be found, or until all available input is skipped. No output - is provided. - - inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no marker has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -extern int inflateReset OF((z_stream *strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -extern int inflateIncomp OF((z_stream *strm)); -/* - This function adds the data at next_in (avail_in bytes) to the output - history without performing any output. There must be no pending output, - and the decompressor must be expecting to see the start of a block. - Calling this function is equivalent to decompressing a stored block - containing the data at next_in (except that the data is not output). -*/ - - /* checksum functions */ - -/* - This function is not related to compression but is exported - anyway because it might be useful in applications using the - compression library. -*/ - -extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); - -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -#ifndef _Z_UTIL_H - struct internal_state {int dummy;}; /* hack for buggy compilers */ -#endif - -#endif /* _ZLIB_H */ |