diff options
Diffstat (limited to 'mdk-stage1/ppp/pppd/main.c')
| -rw-r--r-- | mdk-stage1/ppp/pppd/main.c | 1846 |
1 files changed, 0 insertions, 1846 deletions
diff --git a/mdk-stage1/ppp/pppd/main.c b/mdk-stage1/ppp/pppd/main.c deleted file mode 100644 index c074938cd..000000000 --- a/mdk-stage1/ppp/pppd/main.c +++ /dev/null @@ -1,1846 +0,0 @@ -/* - * main.c - Point-to-Point Protocol main module - * - * Copyright (c) 1989 Carnegie Mellon University. - * All rights reserved. - * - * Redistribution and use in source and binary forms are permitted - * provided that the above copyright notice and this paragraph are - * duplicated in all such forms and that any documentation, - * advertising materials, and other materials related to such - * distribution and use acknowledge that the software was developed - * by Carnegie Mellon University. The name of the - * University may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#define RCSID "$Id$" - -#include <stdio.h> -#include <ctype.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <signal.h> -#include <errno.h> -#include <fcntl.h> -#include <syslog.h> -#include <netdb.h> -#include <utmp.h> -#include <pwd.h> -#include <setjmp.h> -#include <sys/param.h> -#include <sys/types.h> -#include <sys/wait.h> -#include <sys/time.h> -#include <sys/resource.h> -#include <sys/stat.h> -#include <sys/socket.h> -#include <netinet/in.h> -#include <arpa/inet.h> - -#include "pppd.h" -#include "magic.h" -#include "fsm.h" -#include "lcp.h" -#include "ipcp.h" -#ifdef INET6 -#include "ipv6cp.h" -#endif -#include "upap.h" -#include "chap.h" -#include "ccp.h" -#include "pathnames.h" -#include "tdb.h" - -#ifdef CBCP_SUPPORT -#include "cbcp.h" -#endif - -#ifdef IPX_CHANGE -#include "ipxcp.h" -#endif /* IPX_CHANGE */ -#ifdef AT_CHANGE -#include "atcp.h" -#endif - -static const char rcsid[] = RCSID; - -/* interface vars */ -char ifname[32]; /* Interface name */ -int ifunit; /* Interface unit number */ - -struct channel *the_channel; - -char *progname; /* Name of this program */ -char hostname[MAXNAMELEN]; /* Our hostname */ -static char pidfilename[MAXPATHLEN]; /* name of pid file */ -static char linkpidfile[MAXPATHLEN]; /* name of linkname pid file */ -char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */ -uid_t uid; /* Our real user-id */ -struct notifier *pidchange = NULL; -struct notifier *phasechange = NULL; -struct notifier *exitnotify = NULL; -struct notifier *sigreceived = NULL; - -int hungup; /* terminal has been hung up */ -int privileged; /* we're running as real uid root */ -int need_holdoff; /* need holdoff period before restarting */ -int detached; /* have detached from terminal */ -volatile int status; /* exit status for pppd */ -int unsuccess; /* # unsuccessful connection attempts */ -int do_callback; /* != 0 if we should do callback next */ -int doing_callback; /* != 0 if we are doing callback */ -TDB_CONTEXT *pppdb; /* database for storing status etc. */ -char db_key[32]; - -int (*holdoff_hook) __P((void)) = NULL; -int (*new_phase_hook) __P((int)) = NULL; - -static int conn_running; /* we have a [dis]connector running */ -static int devfd; /* fd of underlying device */ -static int fd_ppp = -1; /* fd for talking PPP */ -static int fd_loop; /* fd for getting demand-dial packets */ - -int phase; /* where the link is at */ -int kill_link; -int open_ccp_flag; -int listen_time; -int got_sigusr2; -int got_sigterm; -int got_sighup; - -static int waiting; -static sigjmp_buf sigjmp; - -char **script_env; /* Env. variable values for scripts */ -int s_env_nalloc; /* # words avail at script_env */ - -u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */ -u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */ - -static int n_children; /* # child processes still running */ -static int got_sigchld; /* set if we have received a SIGCHLD */ - -int privopen; /* don't lock, open device as root */ - -char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n"; - -GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */ -int ngroups; /* How many groups valid in groups */ - -static struct timeval start_time; /* Time when link was started. */ - -struct pppd_stats link_stats; -int link_connect_time; -int link_stats_valid; - -/* - * We maintain a list of child process pids and - * functions to call when they exit. - */ -struct subprocess { - pid_t pid; - char *prog; - void (*done) __P((void *)); - void *arg; - struct subprocess *next; -}; - -static struct subprocess *children; - -/* Prototypes for procedures local to this file. */ - -static void setup_signals __P((void)); -static void create_pidfile __P((void)); -static void create_linkpidfile __P((void)); -static void cleanup __P((void)); -static void get_input __P((void)); -static void calltimeout __P((void)); -static struct timeval *timeleft __P((struct timeval *)); -static void kill_my_pg __P((int)); -static void hup __P((int)); -static void term __P((int)); -static void chld __P((int)); -static void toggle_debug __P((int)); -static void open_ccp __P((int)); -static void bad_signal __P((int)); -static void holdoff_end __P((void *)); -static int reap_kids __P((int waitfor)); -static void update_db_entry __P((void)); -static void add_db_key __P((const char *)); -static void delete_db_key __P((const char *)); -static void cleanup_db __P((void)); -static void handle_events __P((void)); - -extern char *ttyname __P((int)); -extern char *getlogin __P((void)); -int main __P((int, char *[])); - -#ifdef ultrix -#undef O_NONBLOCK -#define O_NONBLOCK O_NDELAY -#endif - -#ifdef ULTRIX -#define setlogmask(x) -#endif - -/* - * PPP Data Link Layer "protocol" table. - * One entry per supported protocol. - * The last entry must be NULL. - */ -struct protent *protocols[] = { - &lcp_protent, - &pap_protent, - &chap_protent, -#ifdef CBCP_SUPPORT - &cbcp_protent, -#endif - &ipcp_protent, -#ifdef INET6 - &ipv6cp_protent, -#endif - &ccp_protent, -#ifdef IPX_CHANGE - &ipxcp_protent, -#endif -#ifdef AT_CHANGE - &atcp_protent, -#endif - NULL -}; - -/* - * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name. - */ -#if !defined(PPP_DRV_NAME) -#define PPP_DRV_NAME "ppp" -#endif /* !defined(PPP_DRV_NAME) */ - -int -main(argc, argv) - int argc; - char *argv[]; -{ - int i, t; - char *p; - struct passwd *pw; - struct protent *protp; - char numbuf[16]; - - new_phase(PHASE_INITIALIZE); - - /* - * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else. - * This way we can close 0, 1, 2 in detach() without clobbering - * a fd that we are using. - */ - if ((i = open("/dev/null", O_RDWR)) >= 0) { - while (0 <= i && i <= 2) - i = dup(i); - if (i >= 0) - close(i); - } - - script_env = NULL; - - /* Initialize syslog facilities */ - reopen_log(); - - if (gethostname(hostname, MAXNAMELEN) < 0 ) { - option_error("Couldn't get hostname: %m"); - exit(1); - } - hostname[MAXNAMELEN-1] = 0; - - /* make sure we don't create world or group writable files. */ - umask(umask(0777) | 022); - - uid = getuid(); - privileged = uid == 0; - slprintf(numbuf, sizeof(numbuf), "%d", uid); - script_setenv("ORIG_UID", numbuf, 0); - - ngroups = getgroups(NGROUPS_MAX, groups); - - /* - * Initialize magic number generator now so that protocols may - * use magic numbers in initialization. - */ - magic_init(); - - /* - * Initialize each protocol. - */ - for (i = 0; (protp = protocols[i]) != NULL; ++i) - (*protp->init)(0); - - /* - * Initialize the default channel. - */ - tty_init(); - - progname = *argv; - - /* - * Parse, in order, the system options file, the user's options file, - * and the command line arguments. - */ - if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1) - || !options_from_user() - || !parse_args(argc-1, argv+1)) - exit(EXIT_OPTION_ERROR); - devnam_fixed = 1; /* can no longer change device name */ - - /* - * Work out the device name, if it hasn't already been specified, - * and parse the tty's options file. - */ - if (the_channel->process_extra_options) - (*the_channel->process_extra_options)(); - - if (debug) - setlogmask(LOG_UPTO(LOG_DEBUG)); - - /* - * Check that we are running as root. - */ - if (geteuid() != 0) { - option_error("must be root to run %s, since it is not setuid-root", - argv[0]); - exit(EXIT_NOT_ROOT); - } - - if (!ppp_available()) { - option_error("%s", no_ppp_msg); - exit(EXIT_NO_KERNEL_SUPPORT); - } - - /* - * Check that the options given are valid and consistent. - */ - check_options(); - if (!sys_check_options()) - exit(EXIT_OPTION_ERROR); - auth_check_options(); -#ifdef HAVE_MULTILINK - mp_check_options(); -#endif - for (i = 0; (protp = protocols[i]) != NULL; ++i) - if (protp->check_options != NULL) - (*protp->check_options)(); - if (the_channel->check_options) - (*the_channel->check_options)(); - - - if (dump_options || dryrun) { - init_pr_log(NULL, LOG_INFO); - print_options(pr_log, NULL); - end_pr_log(); - if (dryrun) - die(0); - } - - /* - * Initialize system-dependent stuff. - */ - sys_init(); - - pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644); - if (pppdb != NULL) { - slprintf(db_key, sizeof(db_key), "pppd%d", getpid()); - update_db_entry(); - } else { - warn("Warning: couldn't open ppp database %s", _PATH_PPPDB); - if (multilink) { - warn("Warning: disabling multilink"); - multilink = 0; - } - } - - /* - * Detach ourselves from the terminal, if required, - * and identify who is running us. - */ - if (!nodetach && !updetach) - detach(); - p = getlogin(); - if (p == NULL) { - pw = getpwuid(uid); - if (pw != NULL && pw->pw_name != NULL) - p = pw->pw_name; - else - p = "(unknown)"; - } - syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid); - script_setenv("PPPLOGNAME", p, 0); - - if (devnam[0]) - script_setenv("DEVICE", devnam, 1); - slprintf(numbuf, sizeof(numbuf), "%d", getpid()); - script_setenv("PPPD_PID", numbuf, 1); - - setup_signals(); - - waiting = 0; - - create_linkpidfile(); - - /* - * If we're doing dial-on-demand, set up the interface now. - */ - if (demand) { - /* - * Open the loopback channel and set it up to be the ppp interface. - */ - tdb_writelock(pppdb); - fd_loop = open_ppp_loopback(); - set_ifunit(1); - tdb_writeunlock(pppdb); - - /* - * Configure the interface and mark it up, etc. - */ - demand_conf(); - } - - do_callback = 0; - for (;;) { - - listen_time = 0; - need_holdoff = 1; - devfd = -1; - status = EXIT_OK; - ++unsuccess; - doing_callback = do_callback; - do_callback = 0; - - if (demand && !doing_callback) { - /* - * Don't do anything until we see some activity. - */ - new_phase(PHASE_DORMANT); - demand_unblock(); - add_fd(fd_loop); - for (;;) { - handle_events(); - if (kill_link && !persist) - break; - if (get_loop_output()) - break; - } - remove_fd(fd_loop); - if (kill_link && !persist) - break; - - /* - * Now we want to bring up the link. - */ - demand_block(); - info("Starting link"); - } - - new_phase(PHASE_SERIALCONN); - - devfd = the_channel->connect(); - if (devfd < 0) - goto fail; - - /* set up the serial device as a ppp interface */ - tdb_writelock(pppdb); - fd_ppp = the_channel->establish_ppp(devfd); - if (fd_ppp < 0) { - tdb_writeunlock(pppdb); - status = EXIT_FATAL_ERROR; - goto disconnect; - } - - if (!demand && ifunit >= 0) - set_ifunit(1); - tdb_writeunlock(pppdb); - - /* - * Start opening the connection and wait for - * incoming events (reply, timeout, etc.). - */ - notice("Connect: %s <--> %s", ifname, ppp_devnam); - gettimeofday(&start_time, NULL); - link_stats_valid = 0; - script_unsetenv("CONNECT_TIME"); - script_unsetenv("BYTES_SENT"); - script_unsetenv("BYTES_RCVD"); - lcp_lowerup(0); - - add_fd(fd_ppp); - lcp_open(0); /* Start protocol */ - status = EXIT_NEGOTIATION_FAILED; - new_phase(PHASE_ESTABLISH); - while (phase != PHASE_DEAD) { - handle_events(); - get_input(); - if (kill_link) - lcp_close(0, "User request"); - if (open_ccp_flag) { - if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) { - ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */ - (*ccp_protent.open)(0); - } - } - } - - /* - * Print connect time and statistics. - */ - if (link_stats_valid) { - int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */ - info("Connect time %d.%d minutes.", t/10, t%10); - info("Sent %u bytes, received %u bytes.", - link_stats.bytes_out, link_stats.bytes_in); - } - - /* - * Delete pid file before disestablishing ppp. Otherwise it - * can happen that another pppd gets the same unit and then - * we delete its pid file. - */ - if (!demand) { - if (pidfilename[0] != 0 - && unlink(pidfilename) < 0 && errno != ENOENT) - warn("unable to delete pid file %s: %m", pidfilename); - pidfilename[0] = 0; - } - - /* - * If we may want to bring the link up again, transfer - * the ppp unit back to the loopback. Set the - * real serial device back to its normal mode of operation. - */ - remove_fd(fd_ppp); - clean_check(); - the_channel->disestablish_ppp(devfd); - fd_ppp = -1; - if (!hungup) - lcp_lowerdown(0); - if (!demand) - script_unsetenv("IFNAME"); - - /* - * Run disconnector script, if requested. - * XXX we may not be able to do this if the line has hung up! - */ - disconnect: - new_phase(PHASE_DISCONNECT); - the_channel->disconnect(); - - fail: - if (the_channel->cleanup) - (*the_channel->cleanup)(); - - if (!demand) { - if (pidfilename[0] != 0 - && unlink(pidfilename) < 0 && errno != ENOENT) - warn("unable to delete pid file %s: %m", pidfilename); - pidfilename[0] = 0; - } - - if (!persist || (maxfail > 0 && unsuccess >= maxfail)) - break; - - if (demand) - demand_discard(); - t = need_holdoff? holdoff: 0; - if (holdoff_hook) - t = (*holdoff_hook)(); - if (t > 0) { - new_phase(PHASE_HOLDOFF); - TIMEOUT(holdoff_end, NULL, t); - do { - handle_events(); - if (kill_link) - new_phase(PHASE_DORMANT); /* allow signal to end holdoff */ - } while (phase == PHASE_HOLDOFF); - if (!persist) - break; - } - } - - /* Wait for scripts to finish */ - /* XXX should have a timeout here */ - while (n_children > 0) { - if (debug) { - struct subprocess *chp; - dbglog("Waiting for %d child processes...", n_children); - for (chp = children; chp != NULL; chp = chp->next) - dbglog(" script %s, pid %d", chp->prog, chp->pid); - } - if (reap_kids(1) < 0) - break; - } - - die(status); - return 0; -} - -/* - * handle_events - wait for something to happen and respond to it. - */ -static void -handle_events() -{ - struct timeval timo; - sigset_t mask; - - kill_link = open_ccp_flag = 0; - if (sigsetjmp(sigjmp, 1) == 0) { - sigprocmask(SIG_BLOCK, &mask, NULL); - if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) { - sigprocmask(SIG_UNBLOCK, &mask, NULL); - } else { - waiting = 1; - sigprocmask(SIG_UNBLOCK, &mask, NULL); - wait_input(timeleft(&timo)); - } - } - waiting = 0; - calltimeout(); - if (got_sighup) { - kill_link = 1; - got_sighup = 0; - if (status != EXIT_HANGUP) - status = EXIT_USER_REQUEST; - } - if (got_sigterm) { - kill_link = 1; - persist = 0; - status = EXIT_USER_REQUEST; - got_sigterm = 0; - } - if (got_sigchld) { - reap_kids(0); /* Don't leave dead kids lying around */ - got_sigchld = 0; - } - if (got_sigusr2) { - open_ccp_flag = 1; - got_sigusr2 = 0; - } -} - -/* - * setup_signals - initialize signal handling. - */ -static void -setup_signals() -{ - struct sigaction sa; - sigset_t mask; - - /* - * Compute mask of all interesting signals and install signal handlers - * for each. Only one signal handler may be active at a time. Therefore, - * all other signals should be masked when any handler is executing. - */ - sigemptyset(&mask); - sigaddset(&mask, SIGHUP); - sigaddset(&mask, SIGINT); - sigaddset(&mask, SIGTERM); - sigaddset(&mask, SIGCHLD); - sigaddset(&mask, SIGUSR2); - -#define SIGNAL(s, handler) do { \ - sa.sa_handler = handler; \ - if (sigaction(s, &sa, NULL) < 0) \ - fatal("Couldn't establish signal handler (%d): %m", s); \ - } while (0) - - sa.sa_mask = mask; - sa.sa_flags = 0; - SIGNAL(SIGHUP, hup); /* Hangup */ - SIGNAL(SIGINT, term); /* Interrupt */ - SIGNAL(SIGTERM, term); /* Terminate */ - SIGNAL(SIGCHLD, chld); - - SIGNAL(SIGUSR1, toggle_debug); /* Toggle debug flag */ - SIGNAL(SIGUSR2, open_ccp); /* Reopen CCP */ - - /* - * Install a handler for other signals which would otherwise - * cause pppd to exit without cleaning up. - */ - SIGNAL(SIGABRT, bad_signal); - SIGNAL(SIGALRM, bad_signal); - SIGNAL(SIGFPE, bad_signal); - SIGNAL(SIGILL, bad_signal); - SIGNAL(SIGPIPE, bad_signal); - SIGNAL(SIGQUIT, bad_signal); - SIGNAL(SIGSEGV, bad_signal); -#ifdef SIGBUS - SIGNAL(SIGBUS, bad_signal); -#endif -#ifdef SIGEMT - SIGNAL(SIGEMT, bad_signal); -#endif -#ifdef SIGPOLL - SIGNAL(SIGPOLL, bad_signal); -#endif -#ifdef SIGPROF - SIGNAL(SIGPROF, bad_signal); -#endif -#ifdef SIGSYS - SIGNAL(SIGSYS, bad_signal); -#endif -#ifdef SIGTRAP - SIGNAL(SIGTRAP, bad_signal); -#endif -#ifdef SIGVTALRM - SIGNAL(SIGVTALRM, bad_signal); -#endif -#ifdef SIGXCPU - SIGNAL(SIGXCPU, bad_signal); -#endif -#ifdef SIGXFSZ - SIGNAL(SIGXFSZ, bad_signal); -#endif - - /* - * Apparently we can get a SIGPIPE when we call syslog, if - * syslogd has died and been restarted. Ignoring it seems - * be sufficient. - */ - signal(SIGPIPE, SIG_IGN); -} - -/* - * set_ifunit - do things we need to do once we know which ppp - * unit we are using. - */ -void -set_ifunit(iskey) - int iskey; -{ - info("Using interface %s%d", PPP_DRV_NAME, ifunit); - slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit); - script_setenv("IFNAME", ifname, iskey); - if (iskey) { - create_pidfile(); /* write pid to file */ - create_linkpidfile(); - } -} - -/* - * detach - detach us from the controlling terminal. - */ -void -detach() -{ - int pid; - char numbuf[16]; - - if (detached) - return; - if ((pid = fork()) < 0) { - error("Couldn't detach (fork failed: %m)"); - die(1); /* or just return? */ - } - if (pid != 0) { - /* parent */ - notify(pidchange, pid); - exit(0); /* parent dies */ - } - setsid(); - chdir("/"); - close(0); - close(1); - close(2); - detached = 1; - if (log_default) - log_to_fd = -1; - /* update pid files if they have been written already */ - if (pidfilename[0]) - create_pidfile(); - if (linkpidfile[0]) - create_linkpidfile(); - slprintf(numbuf, sizeof(numbuf), "%d", getpid()); - script_setenv("PPPD_PID", numbuf, 1); -} - -/* - * reopen_log - (re)open our connection to syslog. - */ -void -reopen_log() -{ -#ifdef ULTRIX - openlog("pppd", LOG_PID); -#else - openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP); - setlogmask(LOG_UPTO(LOG_INFO)); -#endif -} - -/* - * Create a file containing our process ID. - */ -static void -create_pidfile() -{ - FILE *pidfile; - - slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid", - _PATH_VARRUN, ifname); - if ((pidfile = fopen(pidfilename, "w")) != NULL) { - fprintf(pidfile, "%d\n", getpid()); - (void) fclose(pidfile); - } else { - error("Failed to create pid file %s: %m", pidfilename); - pidfilename[0] = 0; - } -} - -static void -create_linkpidfile() -{ - FILE *pidfile; - - if (linkname[0] == 0) - return; - script_setenv("LINKNAME", linkname, 1); - slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid", - _PATH_VARRUN, linkname); - if ((pidfile = fopen(linkpidfile, "w")) != NULL) { - fprintf(pidfile, "%d\n", getpid()); - if (ifname[0]) - fprintf(pidfile, "%s\n", ifname); - (void) fclose(pidfile); - } else { - error("Failed to create pid file %s: %m", linkpidfile); - linkpidfile[0] = 0; - } -} - -/* - * holdoff_end - called via a timeout when the holdoff period ends. - */ -static void -holdoff_end(arg) - void *arg; -{ - new_phase(PHASE_DORMANT); -} - -/* List of protocol names, to make our messages a little more informative. */ -struct protocol_list { - u_short proto; - const char *name; -} protocol_list[] = { - { 0x21, "IP" }, - { 0x23, "OSI Network Layer" }, - { 0x25, "Xerox NS IDP" }, - { 0x27, "DECnet Phase IV" }, - { 0x29, "Appletalk" }, - { 0x2b, "Novell IPX" }, - { 0x2d, "VJ compressed TCP/IP" }, - { 0x2f, "VJ uncompressed TCP/IP" }, - { 0x31, "Bridging PDU" }, - { 0x33, "Stream Protocol ST-II" }, - { 0x35, "Banyan Vines" }, - { 0x39, "AppleTalk EDDP" }, - { 0x3b, "AppleTalk SmartBuffered" }, - { 0x3d, "Multi-Link" }, - { 0x3f, "NETBIOS Framing" }, - { 0x41, "Cisco Systems" }, - { 0x43, "Ascom Timeplex" }, - { 0x45, "Fujitsu Link Backup and Load Balancing (LBLB)" }, - { 0x47, "DCA Remote Lan" }, - { 0x49, "Serial Data Transport Protocol (PPP-SDTP)" }, - { 0x4b, "SNA over 802.2" }, - { 0x4d, "SNA" }, - { 0x4f, "IP6 Header Compression" }, - { 0x6f, "Stampede Bridging" }, - { 0xfb, "single-link compression" }, - { 0xfd, "1st choice compression" }, - { 0x0201, "802.1d Hello Packets" }, - { 0x0203, "IBM Source Routing BPDU" }, - { 0x0205, "DEC LANBridge100 Spanning Tree" }, - { 0x0231, "Luxcom" }, - { 0x0233, "Sigma Network Systems" }, - { 0x8021, "Internet Protocol Control Protocol" }, - { 0x8023, "OSI Network Layer Control Protocol" }, - { 0x8025, "Xerox NS IDP Control Protocol" }, - { 0x8027, "DECnet Phase IV Control Protocol" }, - { 0x8029, "Appletalk Control Protocol" }, - { 0x802b, "Novell IPX Control Protocol" }, - { 0x8031, "Bridging NCP" }, - { 0x8033, "Stream Protocol Control Protocol" }, - { 0x8035, "Banyan Vines Control Protocol" }, - { 0x803d, "Multi-Link Control Protocol" }, - { 0x803f, "NETBIOS Framing Control Protocol" }, - { 0x8041, "Cisco Systems Control Protocol" }, - { 0x8043, "Ascom Timeplex" }, - { 0x8045, "Fujitsu LBLB Control Protocol" }, - { 0x8047, "DCA Remote Lan Network Control Protocol (RLNCP)" }, - { 0x8049, "Serial Data Control Protocol (PPP-SDCP)" }, - { 0x804b, "SNA over 802.2 Control Protocol" }, - { 0x804d, "SNA Control Protocol" }, - { 0x804f, "IP6 Header Compression Control Protocol" }, - { 0x006f, "Stampede Bridging Control Protocol" }, - { 0x80fb, "Single Link Compression Control Protocol" }, - { 0x80fd, "Compression Control Protocol" }, - { 0xc021, "Link Control Protocol" }, - { 0xc023, "Password Authentication Protocol" }, - { 0xc025, "Link Quality Report" }, - { 0xc027, "Shiva Password Authentication Protocol" }, - { 0xc029, "CallBack Control Protocol (CBCP)" }, - { 0xc081, "Container Control Protocol" }, - { 0xc223, "Challenge Handshake Authentication Protocol" }, - { 0xc281, "Proprietary Authentication Protocol" }, - { 0, NULL }, -}; - -/* - * protocol_name - find a name for a PPP protocol. - */ -const char * -protocol_name(proto) - int proto; -{ - struct protocol_list *lp; - - for (lp = protocol_list; lp->proto != 0; ++lp) - if (proto == lp->proto) - return lp->name; - return NULL; -} - -/* - * get_input - called when incoming data is available. - */ -static void -get_input() -{ - int len, i; - u_char *p; - u_short protocol; - struct protent *protp; - - p = inpacket_buf; /* point to beginning of packet buffer */ - - len = read_packet(inpacket_buf); - if (len < 0) - return; - - if (len == 0) { - notice("Modem hangup"); - hungup = 1; - status = EXIT_HANGUP; - lcp_lowerdown(0); /* serial link is no longer available */ - link_terminated(0); - return; - } - - if (debug /*&& (debugflags & DBG_INPACKET)*/) - dbglog("rcvd %P", p, len); - - if (len < PPP_HDRLEN) { - MAINDEBUG(("io(): Received short packet.")); - return; - } - - p += 2; /* Skip address and control */ - GETSHORT(protocol, p); - len -= PPP_HDRLEN; - - /* - * Toss all non-LCP packets unless LCP is OPEN. - */ - if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) { - MAINDEBUG(("get_input: Received non-LCP packet when LCP not open.")); - return; - } - - /* - * Until we get past the authentication phase, toss all packets - * except LCP, LQR and authentication packets. - */ - if (phase <= PHASE_AUTHENTICATE - && !(protocol == PPP_LCP || protocol == PPP_LQR - || protocol == PPP_PAP || protocol == PPP_CHAP)) { - MAINDEBUG(("get_input: discarding proto 0x%x in phase %d", - protocol, phase)); - return; - } - - /* - * Upcall the proper protocol input routine. - */ - for (i = 0; (protp = protocols[i]) != NULL; ++i) { - if (protp->protocol == protocol && protp->enabled_flag) { - (*protp->input)(0, p, len); - return; - } - if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag - && protp->datainput != NULL) { - (*protp->datainput)(0, p, len); - return; - } - } - - if (debug) { - const char *pname = protocol_name(protocol); - if (pname != NULL) - warn("Unsupported protocol '%s' (0x%x) received", pname, protocol); - else - warn("Unsupported protocol 0x%x received", protocol); - } - lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN); -} - -/* - * new_phase - signal the start of a new phase of pppd's operation. - */ -void -new_phase(p) - int p; -{ - phase = p; - if (new_phase_hook) - (*new_phase_hook)(p); - notify(phasechange, p); -} - -/* - * die - clean up state and exit with the specified status. - */ -void -die(status) - int status; -{ - cleanup(); - notify(exitnotify, status); - syslog(LOG_INFO, "Exit."); - exit(status); -} - -/* - * cleanup - restore anything which needs to be restored before we exit - */ -/* ARGSUSED */ -static void -cleanup() -{ - sys_cleanup(); - - if (fd_ppp >= 0) - the_channel->disestablish_ppp(devfd); - if (the_channel->cleanup) - (*the_channel->cleanup)(); - - if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT) - warn("unable to delete pid file %s: %m", pidfilename); - pidfilename[0] = 0; - if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT) - warn("unable to delete pid file %s: %m", linkpidfile); - linkpidfile[0] = 0; - - if (pppdb != NULL) - cleanup_db(); -} - -/* - * update_link_stats - get stats at link termination. - */ -void -update_link_stats(u) - int u; -{ - struct timeval now; - char numbuf[32]; - - if (!get_ppp_stats(u, &link_stats) - || gettimeofday(&now, NULL) < 0) - return; - link_connect_time = now.tv_sec - start_time.tv_sec; - link_stats_valid = 1; - - slprintf(numbuf, sizeof(numbuf), "%d", link_connect_time); - script_setenv("CONNECT_TIME", numbuf, 0); - slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_out); - script_setenv("BYTES_SENT", numbuf, 0); - slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_in); - script_setenv("BYTES_RCVD", numbuf, 0); -} - - -struct callout { - struct timeval c_time; /* time at which to call routine */ - void *c_arg; /* argument to routine */ - void (*c_func) __P((void *)); /* routine */ - struct callout *c_next; -}; - -static struct callout *callout = NULL; /* Callout list */ -static struct timeval timenow; /* Current time */ - -/* - * timeout - Schedule a timeout. - * - * Note that this timeout takes the number of milliseconds, NOT hz (as in - * the kernel). - */ -void -timeout(func, arg, secs, usecs) - void (*func) __P((void *)); - void *arg; - int secs, usecs; -{ - struct callout *newp, *p, **pp; - - MAINDEBUG(("Timeout %p:%p in %d.%03d seconds.", func, arg, - time / 1000, time % 1000)); - - /* - * Allocate timeout. - */ - if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL) - fatal("Out of memory in timeout()!"); - newp->c_arg = arg; - newp->c_func = func; - gettimeofday(&timenow, NULL); - newp->c_time.tv_sec = timenow.tv_sec + secs; - newp->c_time.tv_usec = timenow.tv_usec + usecs; - if (newp->c_time.tv_usec >= 1000000) { - newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000; - newp->c_time.tv_usec %= 1000000; - } - - /* - * Find correct place and link it in. - */ - for (pp = &callout; (p = *pp); pp = &p->c_next) - if (newp->c_time.tv_sec < p->c_time.tv_sec - || (newp->c_time.tv_sec == p->c_time.tv_sec - && newp->c_time.tv_usec < p->c_time.tv_usec)) - break; - newp->c_next = p; - *pp = newp; -} - - -/* - * untimeout - Unschedule a timeout. - */ -void -untimeout(func, arg) - void (*func) __P((void *)); - void *arg; -{ - struct callout **copp, *freep; - - MAINDEBUG(("Untimeout %p:%p.", func, arg)); - - /* - * Find first matching timeout and remove it from the list. - */ - for (copp = &callout; (freep = *copp); copp = &freep->c_next) - if (freep->c_func == func && freep->c_arg == arg) { - *copp = freep->c_next; - free((char *) freep); - break; - } -} - - -/* - * calltimeout - Call any timeout routines which are now due. - */ -static void -calltimeout() -{ - struct callout *p; - - while (callout != NULL) { - p = callout; - - if (gettimeofday(&timenow, NULL) < 0) - fatal("Failed to get time of day: %m"); - if (!(p->c_time.tv_sec < timenow.tv_sec - || (p->c_time.tv_sec == timenow.tv_sec - && p->c_time.tv_usec <= timenow.tv_usec))) - break; /* no, it's not time yet */ - - callout = p->c_next; - (*p->c_func)(p->c_arg); - - free((char *) p); - } -} - - -/* - * timeleft - return the length of time until the next timeout is due. - */ -static struct timeval * -timeleft(tvp) - struct timeval *tvp; -{ - if (callout == NULL) - return NULL; - - gettimeofday(&timenow, NULL); - tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec; - tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec; - if (tvp->tv_usec < 0) { - tvp->tv_usec += 1000000; - tvp->tv_sec -= 1; - } - if (tvp->tv_sec < 0) - tvp->tv_sec = tvp->tv_usec = 0; - - return tvp; -} - - -/* - * kill_my_pg - send a signal to our process group, and ignore it ourselves. - */ -static void -kill_my_pg(sig) - int sig; -{ - struct sigaction act, oldact; - - act.sa_handler = SIG_IGN; - act.sa_flags = 0; - kill(0, sig); - sigaction(sig, &act, &oldact); - sigaction(sig, &oldact, NULL); -} - - -/* - * hup - Catch SIGHUP signal. - * - * Indicates that the physical layer has been disconnected. - * We don't rely on this indication; if the user has sent this - * signal, we just take the link down. - */ -static void -hup(sig) - int sig; -{ - info("Hangup (SIGHUP)"); - got_sighup = 1; - if (conn_running) - /* Send the signal to the [dis]connector process(es) also */ - kill_my_pg(sig); - notify(sigreceived, sig); - if (waiting) - siglongjmp(sigjmp, 1); -} - - -/* - * term - Catch SIGTERM signal and SIGINT signal (^C/del). - * - * Indicates that we should initiate a graceful disconnect and exit. - */ -/*ARGSUSED*/ -static void -term(sig) - int sig; -{ - info("Terminating on signal %d.", sig); - got_sigterm = 1; - if (conn_running) - /* Send the signal to the [dis]connector process(es) also */ - kill_my_pg(sig); - notify(sigreceived, sig); - if (waiting) - siglongjmp(sigjmp, 1); -} - - -/* - * chld - Catch SIGCHLD signal. - * Sets a flag so we will call reap_kids in the mainline. - */ -static void -chld(sig) - int sig; -{ - got_sigchld = 1; - if (waiting) - siglongjmp(sigjmp, 1); -} - - -/* - * toggle_debug - Catch SIGUSR1 signal. - * - * Toggle debug flag. - */ -/*ARGSUSED*/ -static void -toggle_debug(sig) - int sig; -{ - debug = !debug; - if (debug) { - setlogmask(LOG_UPTO(LOG_DEBUG)); - } else { - setlogmask(LOG_UPTO(LOG_WARNING)); - } -} - - -/* - * open_ccp - Catch SIGUSR2 signal. - * - * Try to (re)negotiate compression. - */ -/*ARGSUSED*/ -static void -open_ccp(sig) - int sig; -{ - got_sigusr2 = 1; - if (waiting) - siglongjmp(sigjmp, 1); -} - - -/* - * bad_signal - We've caught a fatal signal. Clean up state and exit. - */ -static void -bad_signal(sig) - int sig; -{ - static int crashed = 0; - - if (crashed) - _exit(127); - crashed = 1; - error("Fatal signal %d", sig); - if (conn_running) - kill_my_pg(SIGTERM); - notify(sigreceived, sig); - die(127); -} - - -/* - * device_script - run a program to talk to the specified fds - * (e.g. to run the connector or disconnector script). - * stderr gets connected to the log fd or to the _PATH_CONNERRS file. - */ -int -device_script(program, in, out, dont_wait) - char *program; - int in, out; - int dont_wait; -{ - int pid, fd; - int status = -1; - int errfd; - - ++conn_running; - pid = fork(); - - if (pid < 0) { - --conn_running; - error("Failed to create child process: %m"); - return -1; - } - - if (pid != 0) { - if (dont_wait) { - record_child(pid, program, NULL, NULL); - status = 0; - } else { - while (waitpid(pid, &status, 0) < 0) { - if (errno == EINTR) - continue; - fatal("error waiting for (dis)connection process: %m"); - } - --conn_running; - } - return (status == 0 ? 0 : -1); - } - - /* here we are executing in the child */ - /* make sure fds 0, 1, 2 are occupied */ - while ((fd = dup(in)) >= 0) { - if (fd > 2) { - close(fd); - break; - } - } - - /* dup in and out to fds > 2 */ - in = dup(in); - out = dup(out); - if (log_to_fd >= 0) { - errfd = dup(log_to_fd); - } else { - errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600); - } - - /* close fds 0 - 2 and any others we can think of */ - close(0); - close(1); - close(2); - sys_close(); - if (the_channel->close) - (*the_channel->close)(); - closelog(); - - /* dup the in, out, err fds to 0, 1, 2 */ - dup2(in, 0); - close(in); - dup2(out, 1); - close(out); - if (errfd >= 0) { - dup2(errfd, 2); - close(errfd); - } - - setuid(uid); - if (getuid() != uid) { - error("setuid failed"); - exit(1); - } - setgid(getgid()); - { - int argc = 0; - char * argv[500]; - char * ptr = program; - while (ptr != NULL) { - argv[argc] = ptr; - argc++; - ptr = strchr(ptr, ' '); - if (ptr) { - ptr[0] = '\0'; - ptr++; - } - } - argv[argc] = NULL; - execv(argv[0], argv); - error("could not exec %s: %m", program); - exit(99); - } - /* NOTREACHED */ -} - - -/* - * run-program - execute a program with given arguments, - * but don't wait for it. - * If the program can't be executed, logs an error unless - * must_exist is 0 and the program file doesn't exist. - * Returns -1 if it couldn't fork, 0 if the file doesn't exist - * or isn't an executable plain file, or the process ID of the child. - * If done != NULL, (*done)(arg) will be called later (within - * reap_kids) iff the return value is > 0. - */ -pid_t -run_program(prog, args, must_exist, done, arg) - char *prog; - char **args; - int must_exist; - void (*done) __P((void *)); - void *arg; -{ - int pid; - struct stat sbuf; - - /* - * First check if the file exists and is executable. - * We don't use access() because that would use the - * real user-id, which might not be root, and the script - * might be accessible only to root. - */ - errno = EINVAL; - if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode) - || (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) { - if (must_exist || errno != ENOENT) - warn("Can't execute %s: %m", prog); - return 0; - } - - pid = fork(); - if (pid == -1) { - error("Failed to create child process for %s: %m", prog); - return -1; - } - if (pid == 0) { - int new_fd; - - /* Leave the current location */ - (void) setsid(); /* No controlling tty. */ - (void) umask (S_IRWXG|S_IRWXO); - (void) chdir ("/"); /* no current directory. */ - setuid(0); /* set real UID = root */ - setgid(getegid()); - - /* Ensure that nothing of our device environment is inherited. */ - sys_close(); - closelog(); - close (0); - close (1); - close (2); - if (the_channel->close) - (*the_channel->close)(); - - /* Don't pass handles to the PPP device, even by accident. */ - new_fd = open (_PATH_DEVNULL, O_RDWR); - if (new_fd >= 0) { - if (new_fd != 0) { - dup2 (new_fd, 0); /* stdin <- /dev/null */ - close (new_fd); - } - dup2 (0, 1); /* stdout -> /dev/null */ - dup2 (0, 2); /* stderr -> /dev/null */ - } - -#ifdef BSD - /* Force the priority back to zero if pppd is running higher. */ - if (setpriority (PRIO_PROCESS, 0, 0) < 0) - warn("can't reset priority to 0: %m"); -#endif - - /* SysV recommends a second fork at this point. */ - - /* run the program */ - execve(prog, args, script_env); - if (must_exist || errno != ENOENT) { - /* have to reopen the log, there's nowhere else - for the message to go. */ - reopen_log(); - syslog(LOG_ERR, "Can't execute %s: %m", prog); - closelog(); - } - _exit(-1); - } - - if (debug) - dbglog("Script %s started (pid %d)", prog, pid); - record_child(pid, prog, done, arg); - - return pid; -} - - -/* - * record_child - add a child process to the list for reap_kids - * to use. - */ -void -record_child(pid, prog, done, arg) - int pid; - char *prog; - void (*done) __P((void *)); - void *arg; -{ - struct subprocess *chp; - - ++n_children; - - chp = (struct subprocess *) malloc(sizeof(struct subprocess)); - if (chp == NULL) { - warn("losing track of %s process", prog); - } else { - chp->pid = pid; - chp->prog = prog; - chp->done = done; - chp->arg = arg; - chp->next = children; - children = chp; - } -} - - -/* - * reap_kids - get status from any dead child processes, - * and log a message for abnormal terminations. - */ -static int -reap_kids(waitfor) - int waitfor; -{ - int pid, status; - struct subprocess *chp, **prevp; - - if (n_children == 0) - return 0; - while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1 - && pid != 0) { - for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) { - if (chp->pid == pid) { - --n_children; - *prevp = chp->next; - break; - } - } - if (WIFSIGNALED(status)) { - warn("Child process %s (pid %d) terminated with signal %d", - (chp? chp->prog: "??"), pid, WTERMSIG(status)); - } else if (debug) - dbglog("Script %s finished (pid %d), status = 0x%x", - (chp? chp->prog: "??"), pid, status); - if (chp && chp->done) - (*chp->done)(chp->arg); - if (chp) - free(chp); - } - if (pid == -1) { - if (errno == ECHILD) - return -1; - if (errno != EINTR) - error("Error waiting for child process: %m"); - } - return 0; -} - -/* - * add_notifier - add a new function to be called when something happens. - */ -void -add_notifier(notif, func, arg) - struct notifier **notif; - notify_func func; - void *arg; -{ - struct notifier *np; - - np = malloc(sizeof(struct notifier)); - if (np == 0) - novm("notifier struct"); - np->next = *notif; - np->func = func; - np->arg = arg; - *notif = np; -} - -/* - * remove_notifier - remove a function from the list of things to - * be called when something happens. - */ -void -remove_notifier(notif, func, arg) - struct notifier **notif; - notify_func func; - void *arg; -{ - struct notifier *np; - - for (; (np = *notif) != 0; notif = &np->next) { - if (np->func == func && np->arg == arg) { - *notif = np->next; - free(np); - break; - } - } -} - -/* - * notify - call a set of functions registered with add_notify. - */ -void -notify(notif, val) - struct notifier *notif; - int val; -{ - struct notifier *np; - - while ((np = notif) != 0) { - notif = np->next; - (*np->func)(np->arg, val); - } -} - -/* - * novm - log an error message saying we ran out of memory, and die. - */ -void -novm(msg) - char *msg; -{ - fatal("Virtual memory exhausted allocating %s\n", msg); -} - -/* - * script_setenv - set an environment variable value to be used - * for scripts that we run (e.g. ip-up, auth-up, etc.) - */ -void -script_setenv(var, value, iskey) - char *var, *value; - int iskey; -{ - size_t varl = strlen(var); - size_t vl = varl + strlen(value) + 2; - int i; - char *p, *newstring; - - newstring = (char *) malloc(vl+1); - if (newstring == 0) - return; - *newstring++ = iskey; - slprintf(newstring, vl, "%s=%s", var, value); - - /* check if this variable is already set */ - if (script_env != 0) { - for (i = 0; (p = script_env[i]) != 0; ++i) { - if (strncmp(p, var, varl) == 0 && p[varl] == '=') { - if (p[-1] && pppdb != NULL) - delete_db_key(p); - free(p-1); - script_env[i] = newstring; - if (iskey && pppdb != NULL) - add_db_key(newstring); - update_db_entry(); - return; - } - } - } else { - /* no space allocated for script env. ptrs. yet */ - i = 0; - script_env = (char **) malloc(16 * sizeof(char *)); - if (script_env == 0) - return; - s_env_nalloc = 16; - } - - /* reallocate script_env with more space if needed */ - if (i + 1 >= s_env_nalloc) { - int new_n = i + 17; - char **newenv = (char **) realloc((void *)script_env, - new_n * sizeof(char *)); - if (newenv == 0) - return; - script_env = newenv; - s_env_nalloc = new_n; - } - - script_env[i] = newstring; - script_env[i+1] = 0; - - if (pppdb != NULL) { - if (iskey) - add_db_key(newstring); - update_db_entry(); - } -} - -/* - * script_unsetenv - remove a variable from the environment - * for scripts. - */ -void -script_unsetenv(var) - char *var; -{ - int vl = strlen(var); - int i; - char *p; - - if (script_env == 0) - return; - for (i = 0; (p = script_env[i]) != 0; ++i) { - if (strncmp(p, var, vl) == 0 && p[vl] == '=') { - if (p[-1] && pppdb != NULL) - delete_db_key(p); - free(p-1); - while ((script_env[i] = script_env[i+1]) != 0) - ++i; - break; - } - } - if (pppdb != NULL) - update_db_entry(); -} - -/* - * update_db_entry - update our entry in the database. - */ -static void -update_db_entry() -{ - TDB_DATA key, dbuf; - int vlen, i; - char *p, *q, *vbuf; - - if (script_env == NULL) - return; - vlen = 0; - for (i = 0; (p = script_env[i]) != 0; ++i) - vlen += strlen(p) + 1; - vbuf = malloc(vlen); - if (vbuf == 0) - novm("database entry"); - q = vbuf; - for (i = 0; (p = script_env[i]) != 0; ++i) - q += slprintf(q, vbuf + vlen - q, "%s;", p); - - key.dptr = db_key; - key.dsize = strlen(db_key); - dbuf.dptr = vbuf; - dbuf.dsize = vlen; - if (tdb_store(pppdb, key, dbuf, TDB_REPLACE)) - error("tdb_store failed: %s", tdb_error(pppdb)); - -} - -/* - * add_db_key - add a key that we can use to look up our database entry. - */ -static void -add_db_key(str) - const char *str; -{ - TDB_DATA key, dbuf; - - key.dptr = (char *) str; - key.dsize = strlen(str); - dbuf.dptr = db_key; - dbuf.dsize = strlen(db_key); - if (tdb_store(pppdb, key, dbuf, TDB_REPLACE)) - error("tdb_store key failed: %s", tdb_error(pppdb)); -} - -/* - * delete_db_key - delete a key for looking up our database entry. - */ -static void -delete_db_key(str) - const char *str; -{ - TDB_DATA key; - - key.dptr = (char *) str; - key.dsize = strlen(str); - tdb_delete(pppdb, key); -} - -/* - * cleanup_db - delete all the entries we put in the database. - */ -static void -cleanup_db() -{ - TDB_DATA key; - int i; - char *p; - - key.dptr = db_key; - key.dsize = strlen(db_key); - tdb_delete(pppdb, key); - for (i = 0; (p = script_env[i]) != 0; ++i) - if (p[-1]) - delete_db_key(p); -} |