summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--perl-install/detect_devices.pm15
-rw-r--r--perl-install/printer/main.pm59
-rw-r--r--perl-install/printer/printerdrake.pm145
3 files changed, 187 insertions, 32 deletions
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
index 1aa420d79..fe5f484cd 100644
--- a/perl-install/detect_devices.pm
+++ b/perl-install/detect_devices.pm
@@ -640,8 +640,9 @@ sub whatUsbport() {
# Remove non-printable characters
$idstr =~ tr/[\x00-\x1f]/\./;
# Extract the printer data from the ID string
- my ($manufacturer, $model, $serialnumber, $description) =
- ("", "", "", "");
+ my ($manufacturer, $model, $serialnumber, $description,
+ $commandset, $sku) =
+ ("", "", "", "", "");
if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) {
$manufacturer = $1;
$manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
@@ -653,7 +654,7 @@ sub whatUsbport() {
$model ||= $1;
}
if ($idstr =~ /SKU:([^;]+);/) {
- $model = $1;
+ $sku = $1;
}
if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) {
$description = $1;
@@ -663,6 +664,10 @@ sub whatUsbport() {
if ($idstr =~ /SE*R*N:([^;]+);/) {
$serialnumber = $1;
}
+ if ($idstr =~ /CMD:([^;]+);/ ||
+ $idstr =~ /COMMAND\s*SET:([^;]+);/) {
+ $commandset ||= $1;
+ }
# Was there a manufacturer and a model in the string?
if ($manufacturer eq "" || $model eq "") {
next;
@@ -677,7 +682,9 @@ sub whatUsbport() {
MODEL => $model,
MANUFACTURER => $manufacturer,
DESCRIPTION => $description,
- SERIALNUMBER => $serialnumber
+ SERIALNUMBER => $serialnumber,
+ 'COMMAND SET' => $commandset,
+ SKU => $sku
} };
}
@res;
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index b45e1f7da..a94f577ab 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -383,6 +383,7 @@ sub read_printer_db(;$) {
my $inentry = 0;
my $indrivers = 0;
my $inautodetect = 0;
+ my $autodetecttype = "";
local $_;
while (<DBPATH>) {
chomp;
@@ -399,9 +400,31 @@ sub read_printer_db(;$) {
} elsif ($inautodetect) {
# We are inside the autodetect block of a printers entry
# All entries inside this block will be ignored
- if (m!^.*</autodetect>\s*$!) {
- # End of autodetect block
- $inautodetect = 0;
+ if ($autodetecttype) {
+ if (m!^.*</$autodetecttype>\s*$!) {
+ # End of parallel, USB, or SNMP section
+ $autodetecttype = "";
+ } elsif (m!^\s*<manufacturer>\s*([^<>]+)\s*</manufacturer>\s*$!) {
+ # Manufacturer
+ $entry->{devidmake} = $1;
+ } elsif (m!^\s*<model>\s*([^<>]+)\s*</model>\s*$!) {
+ # Model
+ $entry->{devidmodel} = $1;
+ } elsif (m!^\s*<description>\s*([^<>]+)\s*</description>\s*$!) {
+ # Description
+ $entry->{deviddesc} = $1;
+ } elsif (m!^\s*<commandset>\s*([^<>]+)\s*</commandset>\s*$!) {
+ # Command set
+ $entry->{devidcmdset} = $1;
+ }
+ } else {
+ if (m!^.*</autodetect>\s*$!) {
+ # End of autodetect block
+ $inautodetect = 0;
+ } elsif (m!^\s*<(parallel|usb|snmp)>\s*$!) {
+ # Beginning of parallel, USB, or SNMP section
+ $autodetecttype = $1;
+ }
}
} else {
if (m!^\s*</printer>\s*$!) {
@@ -422,6 +445,9 @@ sub read_printer_db(;$) {
$driverstr .= " (recommended)";
}
$entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
+ $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
+ $entry->{ENTRY} =~
+ s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
$entry->{driver} = $driver;
# Duplicate contents of $entry because it is multiply entered to the database
map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
@@ -431,6 +457,9 @@ sub read_printer_db(;$) {
# Make one entry per printer, with the recommended
# driver (manufacturerer|model)
$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
+ $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
+ $entry->{ENTRY} =~
+ s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
if ($entry->{defaultdriver}) {
$entry->{driver} = $entry->{defaultdriver};
map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
@@ -1459,9 +1488,30 @@ sub poll_ppd_base {
if ($ppd eq "raw") { next }
my ($model, $driver);
if ($descr) {
- if ($descr =~ /^([^,]+), (.*)$/) {
+ $descr =~ s/\s*Series//i;
+ $descr =~ s/\((.*?(PostScript|PS).*?)\)/$1/i;
+ if (($descr =~ /^([^,]+[^,\s])\s+(PS.*)$/i) ||
+ ($descr =~ /^([^,]+[^,\s])\s*(PostScript.*)$/i) ||
+ ($descr =~
+ /^([^,]+[^,\s])\s*(\(\d\d\d\d\.\d\d\d\).*)$/i) ||
+ ($descr =~
+ /^([^,]+[^,\s])\s*(v\d+\.\d+.*)$/i) ||
+ ($descr =~ /^([^,]+), (.*)$/)) {
$model = $1;
$driver = $2;
+ $model =~ s/[\-\s,]+$//;
+ $driver =~
+ s/\b(PS|PostScript\b)/PostScript/gi;
+ $driver =~
+ s/(PostScript)(.*)(PostScript)/$1$2/i;
+ $driver =~
+ s/^\s*(\(\d\d\d\d\.\d\d\d\)|v\d+\.\d+)([,\s]*)(.*)/$3$2$1/;
+ $driver =~ s/[\-\s,]+$//;
+ $driver =~ s/^[\-\s,]+//;
+ if ($driver !~ /[a-z]/i) {
+ $driver = "PostScript " . $driver;
+ $driver =~ s/ $//;
+ }
} else {
# Some PPDs do not have the ", <driver>" part.
$model = $descr;
@@ -1475,6 +1525,7 @@ sub poll_ppd_base {
}
$ppd && $mf && $descr and do {
my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
+ $key =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
$thedb{$key}{ppd} = $ppd;
$thedb{$key}{driver} = $driver;
$thedb{$key}{make} = $mf;
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 81b570ff3..1ad34fbaa 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -1515,31 +1515,114 @@ sub setup_common {
my $descr = "";
foreach (@autodetected) {
$device eq $_->{port} or next;
- if ($_->{val}{MANUFACTURER} && $_->{val}{MODEL}) {
- $descr = "$_->{val}{MANUFACTURER}|$_->{val}{MODEL}";
+ my ($automake, $automodel, $autodescr, $autocmdset, $autosku) =
+ ($_->{val}{MANUFACTURER}, $_->{val}{MODEL},
+ $_->{val}{DESCRIPTION}, $_->{val}{'COMMAND SET'},
+ $_->{val}{SKU});
+ if ($automake && $autosku) {
+ $descr = "$automake|$autosku";
+ } elsif ($automake && $automodel) {
+ $descr = "$automake|$automodel";
} else {
- $descr = $_->{val}{DESCRIPTION};
+ $descr = $autodescr;
$descr =~ s/ /\|/;
}
+ $descr =~ s/^$automake\|\s*$automake\s*/$automake\|/;
# Clean up the description from noise which makes the best match
# difficult
- $descr =~ s/Seiko\s+Epson/Epson/;
- $descr =~ s/\s+Inc\.//;
- $descr =~ s/\s+Corp\.//;
- $descr =~ s/\s+SA\.//;
- $descr =~ s/\s+S\.\s*A\.//;
- $descr =~ s/\s+Ltd\.//;
- $descr =~ s/\s+International//;
- $descr =~ s/\s+Int\.//;
- $descr =~ s/\s+[Ss]eries//;
- $descr =~ s/\s+\(?[Pp]rinter\)?$//;
+ $descr =~ s/Seiko\s+Epson/Epson/i;
+ $descr =~ s/Kyocera[\s\-]*Mita/Kyocera/i;
+ $descr =~ s/\s+Inc\.//i;
+ $descr =~ s/\s+Corp\.//i;
+ $descr =~ s/\s+SA\.//i;
+ $descr =~ s/\s+S\.\s*A\.//i;
+ $descr =~ s/\s+Ltd\.//i;
+ $descr =~ s/\s+International//i;
+ $descr =~ s/\s+Int\.//i;
+ $descr =~ s/\s+[Ss]eries//i;
+ $descr =~ s/\s+\(?[Pp]rinter\)?$//i;
$printer->{DBENTRY} = "";
# Try to find an exact match, check both whether the detected
# make|model is in the make|model of the database entry and vice versa
# If there is more than one matching database entry, the longest match
# counts.
- my $matchlength = 0;
+ my $matchlength = -100;
foreach my $entry (keys %printer::main::thedb) {
+ # Try to match the device ID string of the auto-detection
+ if ($printer::main::thedb{$entry}{make} =~ /Generic/i) {
+ # Database entry for generic printer, check printer
+ # languages (command set)
+ my $cmd = $printer::main::thedb{$entry}{devidcmd};
+ if ($printer::main::thedb{$entry}{model} =~
+ m!PCL\s*5/5e!i) {
+ # Generic PCL 5/5e Printer
+ if ($autocmdset =~
+ /(^|[:,])PCL\s*\-*\s*(5|)([,;]|$)/i) {
+ if ($matchlength < -50) {
+ $matchlength = -50;
+ $printer->{DBENTRY} = $entry;
+ next;
+ }
+ }
+ } elsif ($printer::main::thedb{$entry}{model} =~
+ m!PCL\s*(6|XL)!i) {
+ # Generic PCL 6/XL Printer
+ if ($autocmdset =~
+ /(^|[:,])PCL\s*\-*\s*(6|XL)([,;]|$)/i) {
+ if ($matchlength < -40) {
+ $matchlength = -40;
+ $printer->{DBENTRY} = $entry;
+ next;
+ }
+ }
+ } elsif ($printer::main::thedb{$entry}{model} =~
+ m!(PostScript)!i) {
+ # Generic PostScript Printer
+ if ($autocmdset =~
+ /(^|[:,])(PS|POSTSCRIPT)[^:;,]*([,;]|$)/i) {
+ if ($matchlength < -10) {
+ $matchlength = -10;
+ $printer->{DBENTRY} = $entry;
+ next;
+ }
+ }
+ }
+ } else {
+ # "Real" manufacturer, check manufacturer, model, and/or
+ # description
+ my $matched = 1;
+ my ($mfg, $mdl, $des);
+ if ($mfg = $printer::main::thedb{$entry}{devidmake}) {
+ $mfg =~ s/Hewlett[-\s_]Packard/HP/;
+ $mfg =~ s/HEWLETT[-\s_]PACKARD/HP/;
+ if ($mfg ne $automake) {
+ $matched = 0;
+ }
+ }
+ if ($mdl = $printer::main::thedb{$entry}{devidmodel}) {
+ if ($mdl ne $automodel) {
+ $matched = 0;
+ }
+ }
+ if ($des = $printer::main::thedb{$entry}{deviddesc}) {
+ $des =~ s/Hewlett[-\s_]Packard/HP/;
+ $des =~ s/HEWLETT[-\s_]PACKARD/HP/;
+ if ($des ne $autodescr) {
+ $matched = 0;
+ }
+ }
+ if ($matched && ($des || ($mfg && $mdl))) {
+ # Full match to known auto-detection data
+ $printer->{DBENTRY} = $entry;
+ $matchlength = 1000;
+ last;
+ }
+ }
+ # Do not search human-readable make and model names if we had an
+ # exact match or a match to the auto-detection ID string
+ next if $matchlength >= 100;
+ # Try to match the (human-readable) make and model of the
+ # Foomatic database or of thr PPD file
my $dbmakemodel;
if ($::expert) {
$entry =~ m/^(.*)\|[^\|]*$/;
@@ -1547,29 +1630,42 @@ sub setup_common {
} else {
$dbmakemodel = $entry;
}
+ # Don't try to match if the database entry does not provide
+ # make and model
next unless $dbmakemodel;
- $dbmakemodel =~ s/\|/\\\|/;
+ # If make and model match exactly, we have found the correct
+ # entry and we can stop searching human-readable makes and
+ # models
+ if ($dbmakemodel eq $descr) {
+ $printer->{DBENTRY} = $entry;
+ $matchlength = 100;
+ next;
+ }
my $searchterm = $descr;
- $searchterm =~ s/\|/\\\|/;
my $lsearchterm = length($searchterm);
+ $searchterm =~ s/([\\\/\(\)\[\]\|\.\$\@\%\*\?])/\\$1/g;
if ($lsearchterm > $matchlength &&
- $entry =~ m!$searchterm!i) {
+ $dbmakemodel =~ m!$searchterm!i) {
$matchlength = $lsearchterm;
$printer->{DBENTRY} = $entry;
}
- my $ldbmakemodel = length($dbmakemodel);
- if ($ldbmakemodel > $matchlength &&
- $descr =~ m!$dbmakemodel!i) {
- $matchlength = $ldbmakemodel;
+ $searchterm = $dbmakemodel;
+ $lsearchterm = length($searchterm);
+ $searchterm =~ s/([\\\/\(\)\[\]\|\.\$\@\%\*\?])/\\$1/g;
+ if ($lsearchterm > $matchlength &&
+ $descr =~ m!$searchterm!i) {
+ $matchlength = $lsearchterm;
$printer->{DBENTRY} = $entry;
}
}
- $printer->{DBENTRY} ||= bestMatchSentence($descr, keys %printer::main::thedb);
+ # No matching printer found, try a best match as last mean
+ $printer->{DBENTRY} ||= bestMatchSentence($descr, keys %printer::main::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
$printer->{DBENTRY} =~ /^([^\|]+)\|/;
my $guessedmake = lc($1);
- if ($descr !~ /$guessedmake/i &&
+ if ($guessedmake !~ /Generic/i &&
+ $descr !~ /$guessedmake/i &&
($guessedmake ne "hp" ||
$descr !~ /Hewlett[\s-]+Packard/i))
{ $printer->{DBENTRY} = "" };
@@ -3180,7 +3276,8 @@ sub main {
next;
};
undef $::Wizard_no_previous;
- eval {
+ eval {
+ #do {
# eval to catch wizard cancel. The wizard stuff should
# be in a separate function with steps. see dragw.
# (dams)