summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--perl-install/printer.pm70
1 files changed, 35 insertions, 35 deletions
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index 3cde49185..c00739394 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -106,7 +106,7 @@ sub set_default_spooler ($) {
# Make Foomatic config directory if it does not exist yet
mkdir "$prefix$FOOMATICCONFDIR" if (!(-d "$prefix$FOOMATICCONFDIR"));
# Mark the default driver in a file
- open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" ||
+ open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" or
die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
print DEFSPOOL $printer->{SPOOLER};
close DEFSPOOL;
@@ -120,16 +120,16 @@ sub set_permissions {
if (!$::isInstall) { return 1 }
if ($owner && $group) {
run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
- || die "Could not start chown!";
+ or die "Could not start chown!";
} elsif ($owner) {
run_program::rooted($prefix, "/bin/chown", $owner, $file)
- || die "Could not start chown!";
+ or die "Could not start chown!";
} elsif ($group) {
run_program::rooted($prefix, "/bin/chgrp", $group, $file)
- || die "Could not start chgrp!";
+ or die "Could not start chgrp!";
}
run_program::rooted($prefix, "/bin/chmod", $perms, $file)
- || die "Could not start chmod!";
+ or die "Could not start chmod!";
}
sub restart_service ($) {
@@ -192,7 +192,7 @@ sub service_starts_on_boot ($) {
my ($service) = @_;
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
+ "/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" or
return 0;
while (my $line = <F>) {
chomp $line;
@@ -208,7 +208,7 @@ sub service_starts_on_boot ($) {
sub start_service_on_boot ($) {
my ($service) = @_;
run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
- || return 0;
+ or return 0;
return 1;
}
@@ -276,7 +276,7 @@ sub assure_device_is_available_for_cups {
my ($device) = @_;
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" ||
+ "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" or
die "Could not run \"lpinfo\"!";
while (my $line = <F>) {
if ($line =~ /$device/) { # Found a line containing the device name,
@@ -293,7 +293,7 @@ sub network_running {
# If the network is not running return 0, otherwise 1.
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
+ "/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" or
die "Could not run \"ifconfig\"!";
while (my $line = <F>) {
if (($line !~ /^lo\s+/) && # The loopback device can have been
@@ -319,7 +319,7 @@ sub getSNMPModel {
# SNMP request to auto-detect model
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "/bin/sh -c \"scli -1 -c 'show printer info' $host\" |" ||
+ "/bin/sh -c \"scli -1 -c 'show printer info' $host\" |" or
return { CLASS => 'PRINTER',
MODEL => _("Unknown Model"),
MANUFACTURER => "",
@@ -389,7 +389,7 @@ sub getSMBPrinterShares {
# SMB request to auto-detect shares
local *F;
open F, ($::testing ? "" : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; smbclient -N -L $host\" |" || return ();
+ "/bin/sh -c \"export LC_ALL=C; smbclient -N -L $host\" |" or return ();
my $insharelist = 0;
my @shares;
while (my $l = <F>) {
@@ -495,7 +495,7 @@ sub whatNetPrinter {
local *F;
open F, ($::testing ? "" : "chroot $prefix/ ") .
"/bin/sh -c \"export LC_ALL=C; nmap -r -P0 -p $portlist $hostlist\" |"
- || return @res;
+ or return @res;
my $host = "";
my $ip = "";
my $port = "";
@@ -563,7 +563,7 @@ sub spooler_in_security_level {
$file = "$prefix/etc/security/msec/server.$level";
if (-f $file) {
local *F;
- open F, "< $file" || return 0;
+ open F, "< $file" or return 0;
while (my $line = <F>) {
if ($line =~ /^\s*$sp\s*$/) {
close F;
@@ -582,7 +582,7 @@ sub add_spooler_to_security_level {
$file = "$prefix/etc/security/msec/server.$level";
if (-f $file) {
local *F;
- open F, ">> $file" || return 0;
+ open F, ">> $file" or return 0;
print F "$sp\n";
close F;
}
@@ -603,7 +603,7 @@ sub set_alternative {
# Read the list of executables for the given command to find the number
# of the desired executable
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
+ "/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" or
die "Could not run \"update-alternatives\"!";
my $choice = 0;
while (my $line = <F>) {
@@ -628,7 +628,7 @@ sub pdq_panic_button {
my $setting = $_[0];
if (-f "$prefix/usr/sbin/pdqpanicbutton") {
run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
- || die "Could not $setting PDQ panic buttons!";
+ or die "Could not $setting PDQ panic buttons!";
}
}
@@ -678,7 +678,7 @@ sub read_configured_queues($) {
#- poll queue info
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "foomatic-configure -P -q -s $spooler |" ||
+ "foomatic-configure -P -q -s $spooler |" or
die "Could not run foomatic-configure";
eval (join('',(<F>)));
close F;
@@ -692,7 +692,7 @@ sub read_configured_queues($) {
#- Poll the queues of the current default spooler
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
+ "foomatic-configure -P -q -s $printer->{SPOOLER} |" or
die "Could not run foomatic-configure";
eval (join('',(<F>)));
close F;
@@ -824,7 +824,7 @@ sub read_printer_db(;$) {
# appropriate file when it is already generated
if (!(-f $dbpath)) {
open DBPATH, ($::testing ? $prefix : "chroot $prefix/ ") .
- "foomatic-configure -O -q |" ||
+ "foomatic-configure -O -q |" or
die "Could not run foomatic-configure";
} else {
open DBPATH, $dbpath or die "An error occurred on $dbpath : $!";
@@ -959,7 +959,7 @@ sub read_foomatic_options ($) {
" -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
($printer->{SPECIAL_OPTIONS} ?
" $printer->{SPECIAL_OPTIONS}" : "")
- . " |" ||
+ . " |" or
die "Could not run foomatic-configure";
eval (join('',(<F>)));
close F;
@@ -975,10 +975,10 @@ sub read_cups_options ($) {
local *F;
if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "gunzip -cd $queue_or_file | lphelp - |" || return 0;
+ "gunzip -cd $queue_or_file | lphelp - |" or return 0;
} else { # PPD file not compressed or queue
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "lphelp $queue_or_file |" || return 0;
+ "lphelp $queue_or_file |" or return 0;
}
my $i;
my $j;
@@ -1083,7 +1083,7 @@ sub read_cups_printer_list {
# daemon currently knows, including remote ones.
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
+ "lpstat -v |" or return ();
my @printerlist;
my $line;
while ($line = <F>) {
@@ -1110,7 +1110,7 @@ sub get_cups_remote_queues {
# "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
+ "lpstat -v |" or return ();
my @printerlist;
my $line;
while ($line = <F>) {
@@ -1231,7 +1231,7 @@ sub set_default_printer {
my ($printer) = $_[0];
run_program::rooted($prefix, "foomatic-configure",
"-D", "-q", "-s", $printer->{SPOOLER},
- "-n", $printer->{DEFAULT}) || return 0;
+ "-n", $printer->{DEFAULT}) or return 0;
return 1;
}
@@ -1239,7 +1239,7 @@ sub get_default_printer {
my $printer = $_[0];
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
+ "foomatic-configure -Q -q -s $printer->{SPOOLER} |" or return undef;
my $line;
while ($line = <F>) {
if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
@@ -1689,7 +1689,7 @@ sub get_copiable_queues {
my @queuelist; #- here we will list all Foomatic-generated queues
# Get queue list with foomatic-configure
open QUEUEOUTPUT, ($::testing ? $prefix : "chroot $prefix/ ") .
- "foomatic-configure -Q -q -s $oldspooler |" ||
+ "foomatic-configure -Q -q -s $oldspooler |" or
die "Could not run foomatic-configure";
my $entry = {};
@@ -1777,7 +1777,7 @@ sub configure_hpoj {
# the subroutine definitions stay valid after leaving this subroutine.
if (!$ptalinitread) {
local *PTALINIT;
- open PTALINIT, "$prefix/usr/sbin/ptal-init" || do {
+ open PTALINIT, "$prefix/usr/sbin/ptal-init" or do {
die "unable to open $prefix/usr/sbin/ptal-init";
};
my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init
@@ -1961,7 +1961,7 @@ sub configure_hpoj {
# Open configuration file
local *CONFIG;
- open(CONFIG,"> $prefix/etc/ptal/$ptaldevice") ||
+ open(CONFIG,"> $prefix/etc/ptal/$ptaldevice") or
die "Could not open /etc/ptal/$ptaldevice for writing!\n";
# Write file header.
@@ -2723,7 +2723,7 @@ sub findopenofficeconfigfile {
sub readsofficeconfigfile {
my ($file) = @_;
local *F;
- open F, "< $prefix$file" || return "";
+ open F, "< $prefix$file" or return "";
my $filecontent = join("", <F>);
close F;
return $filecontent;
@@ -2732,7 +2732,7 @@ sub readsofficeconfigfile {
sub writesofficeconfigfile {
my ($file, $filecontent) = @_;
local *F;
- open F, "> $prefix$file" || return 0;
+ open F, "> $prefix$file" or return 0;
print F $filecontent;
close F;
return 1;
@@ -2744,7 +2744,7 @@ sub getcupsremotequeues {
# "BrowsePoll" entries in the local /etc/cups/cupsd.conf
local *F;
open F, ($::testing ? $prefix : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
+ "lpstat -v |" or return ();
my @printerlist;
my $line;
while ($line = <F>) {
@@ -3072,7 +3072,7 @@ sub findgimpconfigfiles {
}
my @filestotreat;
local *PASSWD;
- open PASSWD, "< $prefix/etc/passwd" || die "Cannot read /etc/passwd!\n";
+ open PASSWD, "< $prefix/etc/passwd" or die "Cannot read /etc/passwd!\n";
while (<PASSWD>) {
chomp;
if ($_ =~ /^([^:]+):[^:]*:([^:]+):([^:]+):[^:]*:([^:]+):[^:]*$/) {
@@ -3111,7 +3111,7 @@ sub findgimpconfigfiles {
sub readgimpconfigfile {
my ($file) = @_;
local *F;
- open F, "< $prefix$file" || return "";
+ open F, "< $prefix$file" or return "";
my $filecontent = join("", <F>);
close F;
return $filecontent;
@@ -3120,7 +3120,7 @@ sub readgimpconfigfile {
sub writegimpconfigfile {
my ($file, $filecontent) = @_;
local *F;
- open F, "> $prefix$file" || return 0;
+ open F, "> $prefix$file" or return 0;
print F $filecontent;
close F;
return 1;