This commit was manufactured by cvs2svn to create tagV10_3_0_51mdk

'V10_3_0_51mdk'.

7 files changed, 0 insertions, 1182 deletions

diff --git a/rescue/tree/ka/gen_modules_conf.pl b/rescue/tree/ka/gen_modules_conf.pl
deleted file mode 100644
index ae6c5bec6..000000000
--- a/rescue/tree/ka/gen_modules_conf.pl
+++ /dev/null
@@ -1,191 +0,0 @@
-$kinds2all_modules = {
-                       'usb' => [
-                                  'usb-uhci',
-                                  'usb-ohci',
-                                  'ehci-hcd'
-                                ],
-                       'network' => [
-                                      '3c501',
-                                      '3c503',
-                                      '3c505',
-                                      '3c507',
-                                      '3c509',
-                                      '3c515',
-                                      '3c90x',
-                                      '82596',
-                                      'abyss',
-                                      'ac3200',
-                                      'acenic',
-                                      'aironet4500_card',
-                                      'at1700',
-                                      'atp',
-                                      'com20020-pci',
-                                      'cs89x0',
-                                      'de600',
-                                      'de620',
-                                      'defxx',
-                                      'depca',
-                                      'dgrs',
-                                      'dmfe',
-                                      'e100',
-                                      'e2100',
-                                      'eepro',
-                                      'eepro100',
-                                      'eexpress',
-                                      'epic100',
-                                      'eth16i',
-                                      'ewrk3',
-                                      'hamachi',
-                                      'hp',
-                                      'hp-plus',
-                                      'hp100',
-                                      'ibmtr',
-                                      'lance',
-                                      'natsemi',
-                                      'ne',
-                                      'ne2k-pci',
-                                      'ni5010',
-                                      'ni52',
-                                      'ni65',
-                                      'nvnet',
-                                      'olympic',
-                                      'pcnet32',
-                                      'plip',
-                                      'rcpci',
-                                      'sb1000',
-                                      'sis900',
-                                      'smc-ultra',
-                                      'smc9194',
-                                      'starfire',
-                                      'tlan',
-                                      'tmspci',
-                                      'tulip',
-                                      'via-rhine',
-                                      'wd',
-                                      'winbond-840',
-                                      'forcedeth',
-                                      'fealnx',
-                                      '3c990',
-                                      '3c990fx',
-                                      'b44',
-                                      'bcm4400',
-                                      'skfp',
-                                      'tc35815',
-                                      'lanstreamer',
-                                      'farsync',
-                                      'sdladrv',
-                                      'prism2_plx',
-                                      'iph5526',
-                                      '3c59x',
-                                      '8139too',
-                                      '8139cp',
-                                      'sundance',
-                                      'catc',
-                                      'CDCEther',
-                                      'kaweth',
-                                      'pegasus',
-                                      'rtl8150',
-                                      'usbnet',
-                                      'dl2k',
-                                      'myri_sbus',
-                                      'yellowfin',
-                                      'ns83820',
-                                      'r8169',
-                                      'tg3',
-                                      'e1000',
-                                      'sk98lin',
-                                      'bcm5820',
-                                      'bcm5700'
-                                    ],
-                       'scsi' => [
-                                   '3w-xxxx',
-                                   'AM53C974',
-                                   'BusLogic',
-                                   'NCR53c406a',
-                                   'a100u2w',
-                                   'advansys',
-                                   'aha152x',
-                                   'aha1542',
-                                   'aha1740',
-                                   'atp870u',
-                                   'dc395x_trm',
-                                   'dtc',
-                                   'g_NCR5380',
-                                   'in2000',
-                                   'initio',
-                                   'pas16',
-                                   'pci2220i',
-                                   'psi240i',
-                                   'fdomain',
-                                   'qla1280',
-                                   'qla2x00',
-                                   'qlogicfas',
-                                   'qlogicfc',
-                                   'seagate',
-                                   'wd7000',
-                                   'sim710',
-                                   'sym53c416',
-                                   't128',
-                                   'tmscsim',
-                                   'u14-34f',
-                                   'ultrastor',
-                                   'eata',
-                                   'eata_pio',
-                                   'eata_dma',
-                                   'mptscsih',
-                                   'nsp32',
-                                   'ata_piix',
-                                   'sata_promise',
-                                   'sata_svw',
-                                   'sata_via',
-                                   '53c7,8xx',
-                                   'aic7xxx',
-                                   'aic7xxx_old',
-                                   'aic79xx',
-                                   'pci2000',
-                                   'qlogicisp',
-                                   'sym53c8xx',
-                                   'lpfcdd',
-                                   'DAC960',
-                                   'dpt_i2o',
-                                   'megaraid',
-                                   'aacraid',
-                                   'cciss',
-                                   'cpqarray',
-                                   'gdth',
-                                   'i2o_block',
-                                   'cpqfc',
-                                   'qla2200',
-                                   'qla2300',
-                                   'pdc-ultra',
-                                   'ips',
-                                   'ppa',
-                                   'imm'
-                                 ]
-                     };
-my @l = map { /^(\S+)\s*:/ ? $1 : () } `lspcidrake`;
-
-my %kinds2modules = map { 
-    $_ => [ intersection(\@l, $kinds2all_modules->{$_}) ];
-} qw(usb scsi);
-
-$kinds2modules{network} = [
-  grep {
-	  my $l = $_;
-	  scalar grep { $_ eq $l } @{ $kinds2all_modules->{network} }
-  } @l
-];
-
-if (my @scsi = @{$kinds2modules{scsi}}) {
-    print "probeall scsi_hostadapter ", join(" ", @scsi), "\n";
-}
-if (my @usb = @{$kinds2modules{usb}}) {
-    print "probeall usb-interface ", join(" ", @usb), "\n";
-}
-my $eth = 0;
-foreach (@{$kinds2modules{network}}) {
-    print "alias eth$eth $_\n";
-    $eth++;
-}
-
-sub intersection { my (%l, @m); @l{@{shift @_}} = (); foreach (@_) { @m = grep { exists $l{$_} } @$_; %l = (); @l{@m} = () } keys %l }
diff --git a/rescue/tree/ka/hostnames b/rescue/tree/ka/hostnames
deleted file mode 100644
index e30fac24a..000000000
--- a/rescue/tree/ka/hostnames
+++ /dev/null
@@ -1,225 +0,0 @@
-icluster1 129.88.96.1
-icluster2 129.88.96.2
-icluster3 129.88.96.3
-icluster4 129.88.96.4
-icluster5 129.88.96.51
-icluster6 129.88.96.6
-icluster7 129.88.96.7
-icluster8 129.88.96.8
-icluster9 129.88.96.9
-icluster10 129.88.96.10
-icluster11 129.88.96.11
-icluster12 129.88.96.12
-icluster13 129.88.96.13
-icluster14 129.88.96.14
-icluster15 129.88.96.15
-icluster16 129.88.96.16
-icluster17 129.88.96.17
-icluster18 129.88.96.18
-icluster19 129.88.96.19
-icluster20 129.88.96.20
-icluster21 129.88.96.21
-icluster22 129.88.96.22
-icluster23 129.88.96.23
-icluster24 129.88.96.24
-icluster25 129.88.96.25
-icluster26 129.88.96.26
-icluster27 129.88.96.27
-icluster28 129.88.96.28
-icluster29 129.88.96.29
-icluster30 129.88.96.30
-icluster31 129.88.96.31
-icluster32 129.88.96.32
-icluster33 129.88.96.33
-icluster34 129.88.96.34
-icluster35 129.88.96.35
-icluster36 129.88.96.36
-icluster37 129.88.96.37
-icluster38 129.88.96.38
-icluster39 129.88.96.39
-icluster40 129.88.96.40
-icluster41 129.88.96.41
-icluster42 129.88.96.42
-icluster43 129.88.96.43
-icluster44 129.88.96.44
-icluster45 129.88.96.45
-icluster46 129.88.96.46
-icluster47 129.88.96.47
-icluster48 129.88.96.48
-icluster49 129.88.96.49
-icluster50 129.88.96.50
-icluster51 129.88.96.51
-icluster52 129.88.96.52
-icluster53 129.88.96.53
-icluster54 129.88.96.54
-icluster55 129.88.96.55
-icluster56 129.88.96.56
-icluster57 129.88.96.57
-icluster58 129.88.96.58
-icluster59 129.88.96.59
-icluster60 129.88.96.60
-icluster61 129.88.96.61
-icluster62 129.88.96.62
-icluster63 129.88.96.63
-icluster64 129.88.96.64
-icluster65 129.88.96.65
-icluster66 129.88.96.66
-icluster67 129.88.96.67
-icluster68 129.88.96.68
-icluster69 129.88.96.69
-icluster70 129.88.96.70
-icluster71 129.88.96.71
-icluster72 129.88.96.72
-icluster73 129.88.96.73
-icluster74 129.88.96.74
-icluster75 129.88.96.75
-icluster76 129.88.96.76
-icluster77 129.88.96.77
-icluster78 129.88.96.78
-icluster79 129.88.96.79
-icluster80 129.88.96.80
-icluster81 129.88.96.81
-icluster82 129.88.96.82
-icluster83 129.88.96.83
-icluster84 129.88.96.84
-icluster85 129.88.96.85
-icluster86 129.88.96.86
-icluster87 129.88.96.87
-icluster88 129.88.96.88
-icluster89 129.88.96.89
-icluster90 129.88.96.90
-icluster91 129.88.96.91
-icluster92 129.88.96.92
-icluster93 129.88.96.93
-icluster94 129.88.96.94
-icluster95 129.88.96.95
-icluster96 129.88.96.96
-icluster97 129.88.96.97
-icluster98 129.88.96.98
-icluster99 129.88.96.99
-icluster100 129.88.96.100
-icluster101 129.88.96.101
-icluster102 129.88.96.102
-icluster103 129.88.96.103
-icluster104 129.88.96.104
-icluster105 129.88.96.105
-icluster106 129.88.96.106
-icluster107 129.88.96.107
-icluster108 129.88.96.108
-icluster109 129.88.96.109
-icluster110 129.88.96.110
-icluster111 129.88.96.111
-icluster112 129.88.96.112
-icluster113 129.88.96.113
-icluster114 129.88.96.114
-icluster115 129.88.96.115
-icluster116 129.88.96.116
-icluster117 129.88.96.117
-icluster118 129.88.96.118
-icluster119 129.88.96.119
-icluster120 129.88.96.120
-icluster121 129.88.96.121
-icluster122 129.88.96.122
-icluster123 129.88.96.123
-icluster124 129.88.96.124
-icluster125 129.88.96.125
-icluster126 129.88.96.126
-icluster127 129.88.96.127
-icluster128 129.88.96.128
-icluster129 129.88.96.129
-icluster130 129.88.96.130
-icluster131 129.88.96.131
-icluster132 129.88.96.132
-icluster133 129.88.96.133
-icluster134 129.88.96.134
-icluster135 129.88.96.135
-icluster136 129.88.96.136
-icluster137 129.88.96.137
-icluster138 129.88.96.138
-icluster139 129.88.96.139
-icluster140 129.88.96.140
-icluster141 129.88.96.141
-icluster142 129.88.96.142
-icluster143 129.88.96.143
-icluster144 129.88.96.144
-icluster145 129.88.96.145
-icluster146 129.88.96.146
-icluster147 129.88.96.147
-icluster148 129.88.96.148
-icluster149 129.88.96.149
-icluster150 129.88.96.150
-icluster151 129.88.96.151
-icluster152 129.88.96.152
-icluster153 129.88.96.153
-icluster154 129.88.96.154
-icluster155 129.88.96.155
-icluster156 129.88.96.156
-icluster157 129.88.96.157
-icluster158 129.88.96.158
-icluster159 129.88.96.159
-icluster160 129.88.96.160
-icluster161 129.88.96.161
-icluster162 129.88.96.162
-icluster163 129.88.96.163
-icluster164 129.88.96.164
-icluster165 129.88.96.165
-icluster166 129.88.96.166
-icluster167 129.88.96.167
-icluster168 129.88.96.168
-icluster169 129.88.96.169
-icluster170 129.88.96.170
-icluster171 129.88.96.171
-icluster172 129.88.96.172
-icluster173 129.88.96.173
-icluster174 129.88.96.174
-icluster175 129.88.96.175
-icluster176 129.88.96.176
-icluster177 129.88.96.177
-icluster178 129.88.96.178
-icluster179 129.88.96.179
-icluster180 129.88.96.180
-icluster181 129.88.96.181
-icluster182 129.88.96.182
-icluster183 129.88.96.183
-icluster184 129.88.96.184
-icluster185 129.88.96.185
-icluster186 129.88.96.186
-icluster187 129.88.96.187
-icluster188 129.88.96.188
-icluster189 129.88.96.189
-icluster190 129.88.96.190
-icluster191 129.88.96.191
-icluster192 129.88.96.192
-icluster193 129.88.96.193
-icluster194 129.88.96.194
-icluster195 129.88.96.195
-icluster196 129.88.96.196
-icluster197 129.88.96.197
-icluster198 129.88.96.198
-icluster199 129.88.96.199
-icluster200 129.88.96.200
-icluster201 129.88.96.201
-icluster202 129.88.96.202
-icluster203 129.88.96.203
-icluster204 129.88.96.204
-icluster205 129.88.96.205
-icluster206 129.88.96.206
-icluster207 129.88.96.207
-icluster208 129.88.96.208
-icluster209 129.88.96.209
-icluster210 129.88.96.210
-icluster211 129.88.96.211
-icluster212 129.88.96.212
-icluster213 129.88.96.213
-icluster214 129.88.96.214
-icluster215 129.88.96.215
-icluster216 129.88.96.216
-icluster217 129.88.96.217
-icluster218 129.88.96.218
-icluster219 129.88.96.219
-icluster220 129.88.96.220
-icluster221 129.88.96.221
-icluster222 129.88.96.222
-icluster223 129.88.96.223
-icluster224 129.88.96.224
-icluster225 129.88.96.225
diff --git a/rescue/tree/ka/install.sh b/rescue/tree/ka/install.sh
deleted file mode 100755
index ee93c1e19..000000000
--- a/rescue/tree/ka/install.sh
+++ /dev/null
@@ -1,641 +0,0 @@
-#!/bin/bash
-
-# this script is run by at startup on the nfs_root system, and runs the ka-deploy client 
-# it also updates the 'step file' on the tftp server
-
-# $Revision$
-# $Author$
-# $Date$
-# $Header$
-# $Id$
-# $Log$
-# Revision 1.4  2005/08/28 21:38:32  oblin
-# ka support (initially from Antoine Ginies and Erwan Velu)
-#
-# Revision 1.1.2.5  2003/06/17 06:34:33  erwan
-# Removing remaining dchp cache for KA
-#
-# Revision 1.1.2.4  2003/06/11 18:04:28  erwan
-# Fixing mkreiserfs call
-#
-# Revision 1.1.2.3  2002/11/07 15:10:52  erwan
-# SCSI support now activated
-#
-# Revision 1.1.2.2  2002/11/05 15:49:13  erwan
-# added some files
-#
-# Revision 1.1.2.1  2002/11/05 11:16:54  erwan
-# added ka tools in rescue
-#
-# Revision 1.6  2001/12/03 16:28:02  sderr
-# Completely new install script
-#
-# Revision 1.5  2001/10/10 13:55:04  sderr
-# Updates in documentation
-#
-# Revision 1.4  2001/06/29 09:31:45  sderr
-# *** empty log message ***
-#
-# Revision 1.3  2001/05/31 08:51:43  sderr
-# scripts/doc update to match new command-line syntax
-#
-# Revision 1.2  2001/05/03 12:34:41  sderr
-# Added CVS Keywords to most files. Mostly useless.
-#
-# $State$
-
-# This script is provided as an exmaple and should probably not be run as is
-
-
-unset LANG
-unset LANGUAGE
-
-# needed for some for i in foo* loops
-shopt -s nullglob
-
-bash < /dev/tty2 >/dev/tty2 2>&1 &
-
-# IDEA : maybe this option could be overriden by a kaopt= in the kernel command line ?
-KA_SESSION_BASE="-s kainstall"
-
-ka_call_num=0
-
-inc_ka_session()
-{
-	(( ka_call_num++ ))
-	cur_ka_session=$KA_SESSION_BASE$ka_call_num
-}
-
-
-# testing ? -- NOT FULLY IMPLEMENTED !!!!!!!!!!!!!!!!!!!!
-#DONTWRITE=yes
-DONTWRITE=no
-
-# Let's find out what our IP is
-ip=`/sbin/ifconfig | grep -v 127.0.0.1 | grep "inet addr" | sed 's/^.*inet addr:\([^ ]*\) .*$/\1/g' | head -n 1`
-
-# the file tftpserver should contain the name of the .. tftpserver
-server=`cat tftpserver`
-
-
-# reverse a file
-tac()
-{
-	awk '{ x[NR] = $0 } END { for (i = NR; i >= 1; i--) print x[i] }'
-}
-
-# run a command, hide its output and print OK if it suceeds, print FAILED and show the output otherwise.
-runcom()
-{
-		echo -n "$1..." 1>&2
-		shift;
-		out=`"$@" 2>&1` 
-		ret=$?
-		if [ $ret -eq 0 ]; then
-				echo $C_S"OK"$C_N 1>&2
-		else
-				echo $C_F"Failed"$C_N 1>&2
-				echo $C_W"$out"$C_N 1>&2
-		fi
-		return $ret
-
-}
-
-# 5 4 3 2 1 zero ignition
-countdown()
-{
-        t=$1
-        while [ "$t" -ne 0 ]; do
-                echo -n "$t "
-                sleep 1
-		# move the cursor back
-		# I use now tr instead of sed because busybox's sed adds a non-wanted carriage return
-		# busybox's tr does not seem to know about the [: :] stuff (?)
-                echo -n "$t " | tr " 0-9" $'\x08'
-		(( t-- ))
-        done
-	# backspace only moves the cursor back, so at this point there's still a "1" to erase
-	if [ "$1" -ne 0 ] ;then
-        	echo -n "  "$'\x08\x08'
-	fi
-}
-
-
-int_shell()
-{
-	echo $C_H"starting an interactive shell"$C_N
-	exec /bin/bash
-}
-
-fail()
-{
-		echo $*
-		echo $C_F"--- The installation program FAILED ---"$C_N
-		echo "Check your configuration -- try to read previous error messages"
-		echo "This machine is going to reboot (Ctrl-S to block it) (Ctrl-C for an interactive shell)"
-		trap int_shell SIGINT
-		countdown 30
-		do_reboot
-}
-
-do_reboot()
-{
-		reboot
-		sleep 1234567 # do not continue the install script (/sbin/reboot does not block)
-}
-
-
-	
-# ahem this LILO function should be fixed someday
-# right now this function assumes there is a properly configured lilo on the duplicated linux system
-do_lilo()
-{		
-
-	
-chroot /mnt/disk << EOF
-lilo
-EOF
-
-
-}		
-
-
-run_chroot_command()
-{		
-
-	/usr/sbin/chroot /mnt/disk $*
-
-}		
-
-
-log()
-{
-	echo $* 1>&2
-	echo $* >> /tmp/ginstlog
-}
-
-# version for the standard tftp client
-std_tftp_put_file()
-{
-	remotef=$2
-	localf=$1
-	err=`echo put $localf $remotef | tftp $server 2>&1`
-	err=`echo $err | grep Sent`
-	if [ -z "$err" ]; then
-		log tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-# version for the tftp client built in busybox
-busybox_tftp_put_file()
-{
-	remotef=$2
-	localf=$1
-	err=`tftp -p -l $localf -r $remotef $server 2>&1`
-	if [ $? -ne 0 ]; then
-		log tftp error: could not get/put file $err
-		return 1
-	fi
-	return 0
-}
-
-
-busybox_tftp_get_file()
-{
-	remotef=$1
-	localf=$2
-	err=`tftp -g -l $localf -r $remotef $server 2>&1`
-	if [ $? -ne 0 ]; then
-		log tftp error: could not get/put file $err
-		return 1
-	fi
-	return 0
-}
-
-
-std_tftp_get_file()
-{
-	remotef=$1
-	localf=$2
-	err=`echo get $remotef $localf | tftp $server 2>&1`
-	err=`echo $err | grep Received`
-	if [ -z "$err" ]; then
-		echo tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-tftp_get_file()
-{
-		busybox_tftp_get_file "$@"
-}
-
-tftp_put_file()
-{
-		busybox_tftp_put_file "$@"
-}
-
-# write a string ($2) in a remote file ($1)
-tftp_put_in()
-{
-	echo "$2" > $temp
-	err=`echo put $temp "$1" | tftp $server 2>&1`
-	rm -f $temp
-	err=`echo $err | grep Sent`
-	if [ -z "$err" ]; then
-		log tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-get_var_bis()
-{
-		while read a; do
-			echo "$a" | grep -s -q "^ *#.*"
-			if [ $? -eq 0 ]; then 
-					continue 
-			fi
-			val=`echo "$a" | sed 's/[^"]*"\(.*[^\\]\)".*/\1/'`
-			var=`echo "$a" | sed 's/[^"]*".*[^\\]" *\$\([^ ]*\)/\1/'`
-			if [ "$var" = "$1" ]; then
-					echo $val
-					return 0
-			fi
-		done
-		return 1
-}
-
-# fetch variable $2 from file $1
-get_var()
-{
-		(cat $1; echo) | get_var_bis $2
-}
-
-# find the current step in the kernel command line
-get_step()
-{
-	step=install
-#	step=`cat /proc/cmdline | sed 's/.*kastep=\([^ ]*\).*/\1/'`
-	if [ "$step" ]; then
-		echo $step > /tmp/step
-		return 0
-	fi
-	return 1
-}
-
-
-# write a new file on the tftp server
-# this file is a pxelinux config file
-# do this by getting the 'template file' and adding a DEFAULT at the beginning
-set_step()
-{
-	step=$1
-	
-	
-	runcom "Getting template file" tftp_get_file "ka/pxelinux.cfg/template" /tmp/template || return 1
-	
-	echo DEFAULT $step > /tmp/newcfg
-	cat /tmp/template >> /tmp/newcfg
-	
-	runcom "Sending back new pxelinux config file" tftp_put_file /tmp/newcfg "ka/pxelinux.cfg/IP/$ip" || return 1
-	
-	return 0
-}
-
-
-
-# the mount_partition calls must be done in the same shell (NOT a subshell) because the global variable below has to be updated
-# idea : maybe use a file instead of this variable (and since the tac function now exists, why not ?)
-mounted_fs=""
-
-# mount a partition UNDER /disk !!! (/disk is prepended to $2)
-mount_partition()
-{
-	dev=$1
-	point=$2
-	
-	echo -n "Mounting $C_H$1$C_N as /mnt/disk$C_H$point$C_N" 
-	mkdir -p /mnt/disk$point
-	test -d /mnt/disk$point || return 1
-	runcom "..." mount $dev /mnt/disk/$point || return 1
-	mounted_fs="$dev $mounted_fs"
-	return 0
-}
-
-# umount all mounted partitions under /disk, in the reverse order
-umount_partitions()
-{
-	for dev in $mounted_fs; do
-		retries=0
-		while ! runcom "Umounting $dev" umount $dev ; do
-			sleep 3
-			(( retries++ ))
-			if [ $retries -gt 3 ]; then
-				echo Failed too many times. giving up.
-				break
-			fi
-		done
-	done
-}
-
-
-# recreate excluded directories
-# read stdin like this : u=rwx g=rwx o=rwx uid gid filename
-recreate_dirs()
-{
-	while read line; do
-		declare -a fields
-		fields=( $line )
-		file=/mnt/disk/${fields[5]}
-#		echo $file
-# note : it is possible that the directory exists already, if it was a mount point
-# we need to set the permissions/users anyway
-		mkdir -p $file
-#		echo chmod ${fields[0]},${fields[1]},${fields[2]}  $file
-		chmod ${fields[0]},${fields[1]},${fields[2]}  $file
-		# argl !! chmod o+t does not work with busybox's chmod !
-		# we have to handle it alone
-		if echo ${fields[2]} | grep -q t; then
-			chmod +t $file
-		fi
-		chown ${fields[3]}.${fields[4]} $file
-	done
-}
-
-make_partitions()
-{
-	# we must be in the partfiles directory
-	for file in partition_tab*; do
-		drive=`echo $file | sed 's/partition_tab//'`
-		cat $file | runcom "Writing partition table for $drive using sfdisk" /sbin/sfdisk /dev/$drive -uS --force || fail "error with sfdisk"
-	done
-
-	for file in fdisk_commands*; do
-		drive=`echo $file | sed 's/fdisk_commands//'`
-		runcom "Cleaning hard drive" dd if=/dev/zero of=/dev/$drive bs=1M count=5 || fail "Can t clean drive$drive"
-		cat $file | runcom "Writing partition table for $drive using fdisk" fdisk /dev/$drive || fail "error with fdisk"
-	done
-
-}
-checkDevEntries()
-{ 
-	if ! test -r /mnt/disk/dev/hda ; then
-  		(cd /dev && tar c *) | (cd /mnt/disk/dev && tar x)
-	fi
-}
-
-write_MBRs()
-{
-# we must be in the partfiles directory also
-	for file in MBR*; do
-		drive=`echo $file | sed 's/MBR//'`
-		runcom "Writing new MBR for $drive" dd if=$file of=/dev/$drive bs=1 count=446
-	done
-}
-
-
-# Colors
-# Success
-C_S=$'\033[1;32m'
-# Failure
-C_F=$'\033[1;31m'
-# Warning
-C_W=$'\033[1;33m'
-# Normal
-C_N=$'\033[0;39m'
-# Hilight
-C_H=$'\033[1;39m'
-
-
-# Clear screen, fancy startup message.
-echo $'\033'[2J$'\033'[H
-echo "------| $C_H"Ka"$C_N |---- Install starting..."
-
-temp=/tmp/ginst
-
-# activate dma ? -- obsolete stuff I think		
-# runcom "Setting HD optimizations" hdparm -c1 -d1 -K1 $HD	
-		
-delay=0
-
-if ! runcom "Getting step name" get_step; then
-		echo "Error: Could not get current step "
-		fail
-else
-		step=`cat /tmp/step`
-fi
-
-echo Next Server is `cat /ka/tftpserver`
-
-echo Current step for $ip is : \"$C_H$step$C_N\"
-
-echo -n "Finding install type :  "
-case $step in
-	shell)
-		echo No install, but interactive shell
-		## drop the user to an interactive shell 
-		exec /bin/bash
-		;;
-	install) 
-		install_type=install
-		nextstep=ready
-		echo Install Linux
-		;;
-	test_install) 
-		install_type=test_install
-		nextstep=ready
-		echo TEST TEST TEST
-		countdown 10
-		echo Install Linux TEST
-		;;
-esac
-
-
-if [ -z "$install_type" ]; then
-		echo FATAL : Could not recognize this step name
-		echo "Aborting... "
-		fail
-fi
-
-
-
-# receive the partition table, fstab, etc from the source node
-mkdir /tmp/partfiles
-inc_ka_session
-echo Current session is $cur_ka_session
-runcom "Receiving partitions information" /ka/ka-d-client -w $cur_ka_session -e "( cd /tmp/partfiles && tar xvf - )"	|| fail
-
-
-
-
-cd /tmp/partfiles 
-make_partitions
-
-
-test -f /tmp/partfiles/streams || fail "Missing streams file"
-first_stream=`cat /tmp/partfiles/streams | head -n 1`
-
-if [ "$first_stream" = linux ]; then
-	rcv_linux=yes
-else
-	rcv_linux=no
-fi
-
-
-
-#if we must receive a linux system, we need to format and mount the partitions
-if [ $rcv_linux = yes ]; then	
-	# format partitions
-	format_partitions()
-	{
-		while read line; do
-			declare -a fields
-			fields=( $line )
-
-			case ${fields[2]} in
-				reiserfs )
-					runcom "Formatting ${fields[0]} as reiserfs" mkreiserfs -f ${fields[0]} || fail
-					;;
-				jfs )
-					runcom "Formatting ${fields[0]} as jfs" mkfs.jfs ${fields[0]} || fail
-					;;
-				
-				xfs )
-					runcom "Formatting ${fields[0]}	as xfs" mkfs.xfs -f ${fields[0]} || fail
-					;;
-				ext3 )
-					runcom "Formatting ${fields[0]}	as ext3" mkfs.ext2 -j ${fields[0]} || fail
-					;;
-				ext2 )
-					runcom "Formatting ${fields[0]} as ext2" mkfs.ext2 ${fields[0]} || fail
-					;;
-				swap ) 
-					runcom "Formatting ${fields[0]} as swap" mkswap ${fields[0]} || fail
-					;;
-			esac
-		done
-	}
-
-	format_partitions < /tmp/partfiles/pfstab	
-		
-
-	# mount the partitions
-
-	mount_partitions()
-	{
-		while read line; do
-			declare -a fields
-			fields=( $line )
-
-			case ${fields[2]} in
-				reiserfs )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-				xfs )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-				jfs )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-				ext3 )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-				ext2 )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-			esac
-		done
-	}
-
-	# NOTE
-	# I replaced cat truc | mount_partitions by mount_partitions < truc
-	# because in the former case mount_partitions runs in a subshell and the $mounted_fs value is lost
-	mount_partitions < /tmp/partfiles/pfstab
-
-	echo ++++++++++++++++++++++++++
-	mount
-	echo ++++++++++++++++++++++++++
-
-	delay=0
-else
-	delay=10
-fi
-
-if [ $DONTWRITE != yes ]; then
-	for stream in `cat /tmp/partfiles/streams`; do
-		if [ "$stream" = "linux" ]; then
-			# partitions already formatted/mounted, just copy now
-			# untar data from the master 'on the fly'
-			echo -n "Linux copy is about to start "
-			countdown $delay
-			echo
-			inc_ka_session
-			/ka/ka-d-client -w $cur_ka_session -e "(cd /mnt/disk; tar --extract  --read-full-records --same-permissions --numeric-owner --sparse --file - ) 2>/dev/null" || fail
-
-			runcom "Syncing disks" sync 
-			echo Linux copy done.
-			echo Creating excluded directories
-			cat /tmp/partfiles/excluded | recreate_dirs
-			#echo Setting up networking
-			#/ka/setup_network.sh
-			#delay=10
-		else
-			# maybe receive some raw partition dumps
-			echo Raw copy of $stream is about to start
-			countdown $delay
-			inc_ka_session
-			/ka/ka-d-client -w $cur_ka_session -e "dd of=$stream bs=65536" || fail
-			delay=10
-		fi
-	done
-
-	echo "Removing computing interfaces"
-	rm -f /mnt/disk/etc/sysconfig/network-scripts/ifcfg-eth1 >/dev/null 2>&1
-
-	echo "Removing duplicated dhcp cache"
-	rm -f /mnt/disk/etc/dhcpc/* >/dev/null 2>&1
-
-	echo "Writing modules.conf" 
-	/usr/bin/perl /ka/gen_modules_conf.pl >/mnt/disk/etc/modules.conf
-
-	echo "Writing modprobe.conf"
-	chroot /mnt/disk/ /sbin/generate-modprobe.conf >/mnt/disk/etc/modprobe.conf
-	
-	echo "Running mkinitrd"
-	/ka/make_initrd
-
-	cd /tmp/partfiles
-	write_MBRs
-
-	
-	if test -f /tmp/partfiles/command; then
-		checkDevEntries
-		command_to_run=`cat /tmp/partfiles/command`
-		runcom "Running $command_to_run" run_chroot_command "$command_to_run"
-	fi
-
-else
-	echo " I would run ka-deploy(s) and then lilo/mbr  "
-	sleep 1
-fi
-
-# maybe there is a last dummy ka-deploy for synchronization
-if test -f /tmp/partfiles/delay; then
-	sleep 1
-	inc_ka_session
-	runcom "Waiting source node signal to end installation"	/ka/ka-d-client -w $cur_ka_session -e "cat" || fail
-fi
-
-umount_partitions
-
-	
-# Update the step file on the tftp server
-#runcom 'Sending back new $step' set_step $nextstep || fail
-
-echo -n Rebooting...
-countdown 3
-do_reboot
diff --git a/rescue/tree/ka/ka-d-client b/rescue/tree/ka/ka-d-client
deleted file mode 100755
index 1ae4fa703..000000000
--- a/rescue/tree/ka/ka-d-client
+++ /dev/null
diff --git a/rescue/tree/ka/make_initrd b/rescue/tree/ka/make_initrd
deleted file mode 100755
index 8f8a0492d..000000000
--- a/rescue/tree/ka/make_initrd
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash
-echo Looking for default kernel
-CHROOT=/mnt/disk
-IMG=`cat $CHROOT/etc/lilo.conf | grep default | cut -d "=" -f 2 | sed -e 's/\"//g'`
-KERN="x"
-INITRD=""
-LABEL="x"
-
-modprobe loop
-
-for i in `cat $CHROOT/etc/lilo.conf`; do
-
-	if echo $i | grep image >/dev/null; then
-		KERN=$CHROOT`echo $i | cut -d "=" -f 2`
-		INITRD=""
-		LABEL="x"
-	fi
-	if echo $i | grep label >/dev/null; then
-		LABEL=`echo $i | cut -d "=" -f 2 | sed -e 's/\"//g'`
-	fi
-	if echo $i | grep initrd >/dev/null; then
-		INITRD=`echo $i | cut -d "=" -f 2`
-	fi
-	if [ ${LABEL} == ${IMG} ] && [ ! -z ${INITRD} ]; then
-		echo "Kernel name is $KERN"
-		echo "Initrd name is $INITRD"
-		KERN_VERSION=`/usr/bin/strings $KERN | grep "^2\.[2.6]"| cut -d " " -f 1`
-		if [ -z $KERN_VERSION ]; then
-			echo "No kernel version found !"
-		fi
-		chroot $CHROOT mount /proc
-		mount /dev/ $CHROOT/dev -o bind
-#	        chroot $CHROOT MAKEDEV loop
-#	        chroot $CHROOT MAKEDEV fd
-#	        chroot $CHROOT MAKEDEV hd
-#	        chroot $CHROOT MAKEDEV sd
-#	        chroot $CHROOT MAKEDEV md
-#	        chroot $CHROOT MAKEDEV zero
-	        chroot $CHROOT /sbin/mkinitrd	-f $INITRD $KERN_VERSION
-		umount $CHROOT/dev
-		chroot $CHROOT umount /proc
-		exit
-	fi
-done
diff --git a/rescue/tree/ka/setup_network.sh b/rescue/tree/ka/setup_network.sh
deleted file mode 100755
index 9ef6992bd..000000000
--- a/rescue/tree/ka/setup_network.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/bash
-
-# this script setups the network on the cloned system
-# puts a correct hostname
-# changes the IP if static -- for only ONE device (dunno what will happen with multiple NICs)
-# needs the file /ka/hostnames
-
-
-curdir=`pwd`
-
-
-ip=`/sbin/ifconfig | /bin/grep -v 127.0.0.1 | /bin/grep "inet addr" | /bin/sed 's/^.*inet addr:\([^ ]*\) .*$/\1/g'`
-oldip=$ip
-ip=`echo $ip | sed -e 's/\./_/g'`
-echo -n "Setting hostname: "
-/bin/hostname $ip
-
-
-# current hostname has been set up in rc.sysinit
-ip=$oldip
-echo My IP is $ip
-cd /ka
-
-# the sed command will remove unwanted spaces
-##########################
-# HOSTNMAE already set on NODE
-############################
-#if test -f hostnames ; then
-#	myname=`/bin/cat hostnames | /bin/sed -e 's/  / /g' -e 's/ *$//' | /bin/grep " $ip\$" | /bin/cut -d ' ' -f 1`
-#	nbfound=`echo "$myname" |/usr/bin/wc -l`
-#fi##
-#
-#if [ $nbfound -ne 1 ] || [ -z "$myname" ]; then
-#	# try DNS
-#	echo IP not found in /ka/hostnames, Trying DNS
-#	myname=`/usr/bin/host $ip | /bin/grep "domain name"  | /bin/cut -d " " -f 5 | /bin/sed 's/\.$//g' `
-#	myname=`nslookup $ip | grep ^Name: | tail -n +2 | head -n 1 | sed 's/Name: *//'`
-#fi
-#
-#if [ -z "$myname" ]; then
-#	myname=`/bin/hostname`
-#	echo WARNING:HOSTNAME NOT FOUND
-#fi
-#
-#echo My hostname is $myname
-
-# change hostname in the network file
-#old=/mnt/disk/etc/sysconfig/network.beforeka
-#new=/mnt/disk/etc/sysconfig/network
-
-#rm -f "$old"
-#mv "$new" "$old"
-#/bin/cat "$old" | /bin/grep -v ^HOSTNAME= > "$new"
-#echo "HOSTNAME=$myname" >> "$new"
-######################
-##
-######################
-
-
-
-
-# assume first NIC is the gatewaydev (right ? wrong ?)
-#firstnic=`grep ^GATEWAYDEV "$new" | cut -d = -f 2 | tr -d \"`
-#echo GATEWAYDEV=$firstnic
-
-# see if IP has to be written
-#proto=`grep ^BOOTPROTO /mnt/disk/etc/sysconfig/network-scripts/ifcfg-$firstnic | cut -d = -f 2 | tr -d \"`
-#echo PROTO=$proto
-#if [ "$proto" != "dhcp" ]; then
-#	# proto is static, write the new IP in the config file
-#	old=/mnt/disk/etc/sysconfig/network-scripts/ifcfg-$firstnic.beforeka
-#	new=/mnt/disk/etc/sysconfig/network-scripts/ifcfg-$firstnic
-#
-#	rm -f "$old"
-#	mv "$new" "$old"
-#	cat "$old" | grep -v ^IPADDR= > "$new"
-#	echo IPADDR=$ip >> "$new"
-#fi
-
-cd $curdir
diff --git a/rescue/tree/ka/tftpserver b/rescue/tree/ka/tftpserver
deleted file mode 100644
index deed6748f..000000000
--- a/rescue/tree/ka/tftpserver
+++ /dev/null
@@ -1 +0,0 @@
-192.168.200.10