summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorTill Kamppeter <tkamppeter@mandriva.com>2003-02-21 18:05:22 +0000
committerTill Kamppeter <tkamppeter@mandriva.com>2003-02-21 18:05:22 +0000
commitea43d05303bfbd900b6b2a81b80da8688031c9fb (patch)
treeb41aacca84fe2fe18eb4f5fe2e7f624cada1ab06 /perl-install
parentea32cf09806a3642349cad6bbd524acf6f3b7392 (diff)
downloaddrakx-backup-do-not-use-ea43d05303bfbd900b6b2a81b80da8688031c9fb.tar
drakx-backup-do-not-use-ea43d05303bfbd900b6b2a81b80da8688031c9fb.tar.gz
drakx-backup-do-not-use-ea43d05303bfbd900b6b2a81b80da8688031c9fb.tar.bz2
drakx-backup-do-not-use-ea43d05303bfbd900b6b2a81b80da8688031c9fb.tar.xz
drakx-backup-do-not-use-ea43d05303bfbd900b6b2a81b80da8688031c9fb.zip
- Fixed text of "Refresh printer list" button when list is empty.
- Let printerdrake clean up its datastructure after auto-installing printers in the beginning of the "Summary" installation step.
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/printer/printerdrake.pm912
1 files changed, 458 insertions, 454 deletions
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 6f9d48612..061a14c4d 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -3499,364 +3499,366 @@ sub main {
# For preparation of the "Summary" step of the installation all is done
# now. We do not go into the main loop
- return if !$normal_run;
-
- # Ask for a spooler when none is defined yet
- $printer->{SPOOLER} ||=
- setup_default_spooler($printer, $in, $upNetwork) || return;
-
- # Turn on printer autodetection by default
- $printer->{AUTODETECT} = 1;
- $printer->{AUTODETECTLOCAL} = 1;
- $printer->{AUTODETECTNETWORK} = 1;
- $printer->{AUTODETECTSMB} = 1;
-
- # Control variables for the main loop
- my ($menuchoice, $cursorpos, $queue, $newqueue, $editqueue) =
- ('', '::', $defaultprname, 0, 0);
- # Cursor position in queue modification window
- my $modify = N("Printer options");
- while (1) {
- $newqueue = 0;
- if ($editqueue) {
- # The user was either in the printer modification dialog
- # and did not close it or he had set up a new queue and
- # said that the test page didn't come out correctly, so
- # let the user edit the queue (do not show main window now).
- $editqueue = 0;
- } else {
- # Reset modification window cursor when one leaves the window
- $modify = N("Printer options");
- # This entry and the check for this entry have to use
- # the same translation to work properly
- my $_spoolerentry = N("Printing system: ");
- # If networking is configured, start it, but don't ask the
- # user to configure networking. We want to know whether we
- # have a local network, to suppress some buttons in the
- # recommended mode
- my $havelocalnetworks_or_expert =
- $::expert ||
- check_network($printer, $in, $upNetwork, 1) &&
- printer::detect::getIPsInLocalNetworks() != ();
-# $in->set_help('mainMenu') if $::isInstall;
- # Initialize the cursor position
- if ($cursorpos eq "::" &&
- $printer->{DEFAULT} &&
- $printer->{DEFAULT} ne "") {
- if ($printer->{configured}{$printer->{DEFAULT}}) {
- $cursorpos =
- $printer->{configured}{$printer->{DEFAULT}}{queuedata}{menuentry} . N(" (Default)");
- } elsif ($printer->{SPOOLER} eq "cups") {
- $cursorpos = find { /!$printer->{DEFAULT}:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer);
+ if ($normal_run) {
+
+ # Ask for a spooler when none is defined yet
+ $printer->{SPOOLER} ||=
+ setup_default_spooler($printer, $in, $upNetwork) || return;
+
+ # Turn on printer autodetection by default
+ $printer->{AUTODETECT} = 1;
+ $printer->{AUTODETECTLOCAL} = 1;
+ $printer->{AUTODETECTNETWORK} = 1;
+ $printer->{AUTODETECTSMB} = 1;
+
+ # Control variables for the main loop
+ my ($menuchoice, $cursorpos, $queue, $newqueue, $editqueue) =
+ ('', '::', $defaultprname, 0, 0);
+ # Cursor position in queue modification window
+ my $modify = N("Printer options");
+ while (1) {
+ $newqueue = 0;
+ if ($editqueue) {
+ # The user was either in the printer modification dialog
+ # and did not close it or he had set up a new queue and
+ # said that the test page didn't come out correctly, so
+ # let the user edit the queue (do not show main window now).
+ $editqueue = 0;
+ } else {
+ # Reset modification window cursor when one leaves the window
+ $modify = N("Printer options");
+ # This entry and the check for this entry have to use
+ # the same translation to work properly
+ my $_spoolerentry = N("Printing system: ");
+ # If networking is configured, start it, but don't ask the
+ # user to configure networking. We want to know whether we
+ # have a local network, to suppress some buttons in the
+ # recommended mode
+ my $havelocalnetworks_or_expert =
+ $::expert ||
+ check_network($printer, $in, $upNetwork, 1) &&
+ printer::detect::getIPsInLocalNetworks() != ();
+# $in->set_help('mainMenu') if $::isInstall;
+ # Initialize the cursor position
+ if ($cursorpos eq "::" &&
+ $printer->{DEFAULT} &&
+ $printer->{DEFAULT} ne "") {
+ if ($printer->{configured}{$printer->{DEFAULT}}) {
+ $cursorpos =
+ $printer->{configured}{$printer->{DEFAULT}}{queuedata}{menuentry} . N(" (Default)");
+ } elsif ($printer->{SPOOLER} eq "cups") {
+ $cursorpos = find { /!$printer->{DEFAULT}:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer);
+ }
}
- }
- # Generate the list of available printers
- my @printerlist =
- sort((map { $printer->{configured}{$_}{queuedata}{menuentry}
- . ($_ eq $printer->{DEFAULT} ?
- N(" (Default)") : "") }
- keys(%{$printer->{configured}
- || {}})),
- ($printer->{SPOOLER} eq "cups" ?
- printer::cups::get_formatted_remote_queues($printer) :
- ()));
- my $noprinters = $#printerlist < 0;
- # Position the cursor where it was before (in case
- # a button was pressed).
- $menuchoice = $cursorpos;
- # Show the main dialog
- $in->ask_from_({
- title => N("Printerdrake"),
- messages =>
- ($noprinters ? "" :
- ($printer->{SPOOLER} eq "cups" ?
- N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org/GIMP.") :
- N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it."))),
- cancel => (""),
- ok => ("")},
- # List the queues
- [ if_(!$noprinters,
- { val => \$menuchoice, format => \&translate,
- sort => 0, separator => "!",tree_expanded => 1,
- quit_if_double_click => 1,allow_empty_list =>1,
- list => \@printerlist }),
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@addprinter";
- 1;
- },
- val => N("Add a new printer") },
- ($printer->{SPOOLER} eq "cups" &&
- $havelocalnetworks_or_expert ?
- ({ clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@refresh";
- 1;
- },
- val => N("Refresh printer list (to display all available remote CUPS printers)") },
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@cupsconfig";
- 1;
- },
- val => ($::expert ? N("CUPS configuration") :
- N("Printer sharing")) }) : ()),
- ($::expert ?
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@spooler";
- 1;
- },
- val => N("Change the printing system") } :
- ()),
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@usermode";
- 1
+ # Generate the list of available printers
+ my @printerlist =
+ sort((map { $printer->{configured}{$_}{queuedata}{menuentry}
+ . ($_ eq $printer->{DEFAULT} ?
+ N(" (Default)") : "") }
+ keys(%{$printer->{configured}
+ || {}})),
+ ($printer->{SPOOLER} eq "cups" ?
+ printer::cups::get_formatted_remote_queues($printer) :
+ ()));
+ my $noprinters = $#printerlist < 0;
+ # Position the cursor where it was before (in case
+ # a button was pressed).
+ $menuchoice = $cursorpos;
+ # Show the main dialog
+ $in->ask_from_({
+ title => N("Printerdrake"),
+ messages =>
+ ($noprinters ? "" :
+ ($printer->{SPOOLER} eq "cups" ?
+ N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org/GIMP.") :
+ N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it."))),
+ cancel => (""),
+ ok => ("")},
+ # List the queues
+ [ if_(!$noprinters,
+ { val => \$menuchoice, format => \&translate,
+ sort => 0, separator => "!",tree_expanded => 1,
+ quit_if_double_click => 1,allow_empty_list =>1,
+ list => \@printerlist }),
+ { clicked_may_quit =>
+ sub {
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ $menuchoice = "\@addprinter";
+ 1;
},
- val => ($::expert ? N("Normal Mode") :
- N("Expert Mode")) },
- { clicked_may_quit =>
- sub { $menuchoice = "\@quit"; 1 },
- val => ($::isEmbedded || $::isInstall ?
- N("Done") : N("Quit")) },
- ]);
- # Toggle expert mode and standard mode
- if ($menuchoice eq "\@usermode") {
- printer::main::set_usermode(!$::expert);
- # Read printer database for the new user mode
- %printer::main::thedb = ();
- # Modify menu entries to switch the tree
- # structure between expert/normal mode.
- my $spooler =
- $spoolers{$printer->{SPOOLER}}{short_name};
- if ($::expert) {
- map {
- $printer->{configured}{$_}{queuedata}{menuentry} =~
- s/^/$spooler!/;
- } keys(%{$printer->{configured}});
- $cursorpos =~ s/^/$spooler!/;
- } else {
- map {
- $printer->{configured}{$_}{queuedata}{menuentry} =~
- s/^$spooler!//;
- } keys(%{$printer->{configured}});
- $cursorpos =~ s/^$spooler!//;
+ val => N("Add a new printer") },
+ ($printer->{SPOOLER} eq "cups" &&
+ $havelocalnetworks_or_expert ?
+ ({ clicked_may_quit =>
+ sub {
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ $menuchoice = "\@refresh";
+ 1;
+ },
+ val => ($#printerlist < 0 ?
+ N("Display all available remote CUPS printers") :
+ N("Refresh printer list (to display all available remote CUPS printers)")) },
+ { clicked_may_quit =>
+ sub {
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ $menuchoice = "\@cupsconfig";
+ 1;
+ },
+ val => ($::expert ? N("CUPS configuration") :
+ N("Printer sharing")) }) : ()),
+ ($::expert ?
+ { clicked_may_quit =>
+ sub {
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ $menuchoice = "\@spooler";
+ 1;
+ },
+ val => N("Change the printing system") } :
+ ()),
+ { clicked_may_quit =>
+ sub {
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ $menuchoice = "\@usermode";
+ 1
+ },
+ val => ($::expert ? N("Normal Mode") :
+ N("Expert Mode")) },
+ { clicked_may_quit =>
+ sub { $menuchoice = "\@quit"; 1 },
+ val => ($::isEmbedded || $::isInstall ?
+ N("Done") : N("Quit")) },
+ ]);
+ # Toggle expert mode and standard mode
+ if ($menuchoice eq "\@usermode") {
+ printer::main::set_usermode(!$::expert);
+ # Read printer database for the new user mode
+ %printer::main::thedb = ();
+ # Modify menu entries to switch the tree
+ # structure between expert/normal mode.
+ my $spooler =
+ $spoolers{$printer->{SPOOLER}}{short_name};
+ if ($::expert) {
+ map {
+ $printer->{configured}{$_}{queuedata}{menuentry} =~
+ s/^/$spooler!/;
+ } keys(%{$printer->{configured}});
+ $cursorpos =~ s/^/$spooler!/;
+ } else {
+ map {
+ $printer->{configured}{$_}{queuedata}{menuentry} =~
+ s/^$spooler!//;
+ } keys(%{$printer->{configured}});
+ $cursorpos =~ s/^$spooler!//;
+ }
+ next;
}
- next;
- }
- # Refresh printer list
- next if $menuchoice eq "\@refresh";
- # Configure CUPS
- if ($menuchoice eq "\@cupsconfig") {
- config_cups($printer, $in, $upNetwork);
- next;
- }
- # Determine a default name for a new printer queue
- if ($menuchoice eq "\@addprinter") {
- $newqueue = 1;
- my %queues;
- @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
- my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i }
- $queue = "$defaultprname$i";
- }
- # Call function to switch to another spooler
- if ($menuchoice eq "\@spooler") {
- $printer->{SPOOLER} = setup_default_spooler($printer, $in, $upNetwork) || $printer->{SPOOLER};
- next;
- }
- # Rip the queue name out of the chosen menu entry
- if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
- $queue = $1;
- # Save the cursor position
- $cursorpos = $menuchoice;
- }
- # Save the default spooler
- printer::default::set_spooler($printer);
- #- Close printerdrake
- $menuchoice eq "\@quit" and last;
- }
- if ($newqueue) {
- $printer->{NEW} = 1;
- #- Set default values for a new queue
- $printer_type_inv{$printer->{TYPE}} or
- $printer->{TYPE} = printer::default::printer_type($printer);
- $printer->{currentqueue} = { queue => $queue,
- foomatic => 0,
- desc => "",
- loc => "",
- make => "",
- model => "",
- printer => "",
- driver => "",
- connect => "",
- spooler => $printer->{SPOOLER},
- };
- #- Set OLD_QUEUE field so that the subroutines for the
- #- configuration work correctly.
- $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
- #- Do all the configuration steps for a new queue
- step_0:
- #if ((!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
- if (0 && !$::isEmbedded && !$::isInstall &&
- #if ((!$::isInstall) &&
- $in->isa('interactive::gtk')) {
- # Enter wizard mode
- $::Wizard_pix_up = "wiz_printerdrake.png";
- $::Wizard_title = N("Add a new printer");
- $::isWizard = 1;
- # Wizard welcome screen
- $::Wizard_no_previous = 1;
- undef $::Wizard_no_cancel; undef $::Wizard_finished;
- wizard_welcome($printer, $in, $upNetwork) or do {
- wizard_close($in, 0);
+ # Refresh printer list
+ next if $menuchoice eq "\@refresh";
+ # Configure CUPS
+ if ($menuchoice eq "\@cupsconfig") {
+ config_cups($printer, $in, $upNetwork);
next;
- };
- undef $::Wizard_no_previous;
- eval {
- #do {
- # eval to catch wizard cancel. The wizard stuff should
- # be in a separate function with steps. see dragw.
- # (dams)
- $::expert or $printer->{TYPE} = "LOCAL";
- step_1:
- !$::expert or choose_printer_type($printer, $in) or
- goto step_0;
- step_2:
- setup_printer_connection($printer, $in, $upNetwork) or
- do {
- goto step_1 if $::expert;
+ }
+ # Determine a default name for a new printer queue
+ if ($menuchoice eq "\@addprinter") {
+ $newqueue = 1;
+ my %queues;
+ @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
+ my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i }
+ $queue = "$defaultprname$i";
+ }
+ # Call function to switch to another spooler
+ if ($menuchoice eq "\@spooler") {
+ $printer->{SPOOLER} = setup_default_spooler($printer, $in, $upNetwork) || $printer->{SPOOLER};
+ next;
+ }
+ # Rip the queue name out of the chosen menu entry
+ if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
+ $queue = $1;
+ # Save the cursor position
+ $cursorpos = $menuchoice;
+ }
+ # Save the default spooler
+ printer::default::set_spooler($printer);
+ #- Close printerdrake
+ $menuchoice eq "\@quit" and last;
+ }
+ if ($newqueue) {
+ $printer->{NEW} = 1;
+ #- Set default values for a new queue
+ $printer_type_inv{$printer->{TYPE}} or
+ $printer->{TYPE} = printer::default::printer_type($printer);
+ $printer->{currentqueue} = { queue => $queue,
+ foomatic => 0,
+ desc => "",
+ loc => "",
+ make => "",
+ model => "",
+ printer => "",
+ driver => "",
+ connect => "",
+ spooler => $printer->{SPOOLER},
+ };
+ #- Set OLD_QUEUE field so that the subroutines for the
+ #- configuration work correctly.
+ $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
+ #- Do all the configuration steps for a new queue
+ step_0:
+ #if ((!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
+ if (0 && !$::isEmbedded && !$::isInstall &&
+ #if ((!$::isInstall) &&
+ $in->isa('interactive::gtk')) {
+ # Enter wizard mode
+ $::Wizard_pix_up = "wiz_printerdrake.png";
+ $::Wizard_title = N("Add a new printer");
+ $::isWizard = 1;
+ # Wizard welcome screen
+ $::Wizard_no_previous = 1;
+ undef $::Wizard_no_cancel; undef $::Wizard_finished;
+ wizard_welcome($printer, $in, $upNetwork) or do {
+ wizard_close($in, 0);
+ next;
+ };
+ undef $::Wizard_no_previous;
+ eval {
+ #do {
+ # eval to catch wizard cancel. The wizard stuff
+ # should be in a separate function with steps. see
+ # drakgw.
+ $::expert or $printer->{TYPE} = "LOCAL";
+ step_1:
+ !$::expert or choose_printer_type($printer, $in) or
goto step_0;
- };
- step_3:
+ step_2:
+ setup_printer_connection($printer, $in, $upNetwork) or
+ do {
+ goto step_1 if $::expert;
+ goto step_0;
+ };
+ step_3:
+ if ($::expert or $printer->{MANUAL} or
+ $printer->{MORETHANONE}) {
+ choose_printer_name($printer, $in) or
+ goto step_2;
+ }
+ get_db_entry($printer, $in);
+ step_3_9:
+ if (!$::expert and !$printer->{MANUAL}) {
+ is_model_correct($printer, $in) or do {
+ goto step_3 if $printer->{MORETHANONE};
+ goto step_2;
+ }
+ }
+ step_4:
+ # Remember DB entry for "Previous" button in wizard
+ my $dbentry = $printer->{DBENTRY};
+ if ($::expert or $printer->{MANUAL} or
+ $printer->{MANUALMODEL}) {
+ choose_model($printer, $in) or do {
+ # Restore DB entry
+ $printer->{DBENTRY} = $dbentry;
+ goto step_3_9 if $printer->{MANUALMODEL};
+ goto step_3;
+ };
+ }
+ get_printer_info($printer, $in) or next;
+ step_5:
+ setup_options($printer, $in) or
+ goto step_4;
+ configure_queue($printer, $in) or die 'wizcancel';
+ undef $printer->{MANUAL} if $printer->{MANUAL};
+ $::Wizard_no_previous = 1;
+ setasdefault($printer, $in);
+ $cursorpos =
+ $printer->{configured}{$printer->{QUEUE}}{queuedata}{menuentry} .
+ ($printer->{QUEUE} eq $printer->{DEFAULT} ? N(" (Default)") : '');
+ my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
+ if ($testpages == 1) {
+ # User was content with test pages
+ # Leave wizard mode with congratulations screen
+ wizard_close($in, 1);
+ } elsif ($testpages == 2) {
+ # User was not content with test pages
+ # Leave wizard mode without congratulations
+ # screen
+ wizard_close($in, 0);
+ $editqueue = 1;
+ $queue = $printer->{QUEUE};
+ }
+ };
+ wizard_close($in, 0) if $@ =~ /wizcancel/;
+ } else {
+ $::expert or $printer->{TYPE} = "LOCAL";
+ wizard_welcome($printer, $in, $upNetwork) or next;
+ !$::expert or choose_printer_type($printer, $in) or next;
+ setup_printer_connection($printer, $in, $upNetwork) or next;
if ($::expert or $printer->{MANUAL} or
$printer->{MORETHANONE}) {
- choose_printer_name($printer, $in) or
- goto step_2;
+ choose_printer_name($printer, $in) or next;
}
get_db_entry($printer, $in);
- step_3_9:
if (!$::expert and !$printer->{MANUAL}) {
- is_model_correct($printer, $in) or do {
- goto step_3 if $printer->{MORETHANONE};
- goto step_2;
- }
+ is_model_correct($printer, $in) or next;
}
- step_4:
- # Remember DB entry for "Previous" button in wizard
- my $dbentry = $printer->{DBENTRY};
if ($::expert or $printer->{MANUAL} or
$printer->{MANUALMODEL}) {
- choose_model($printer, $in) or do {
- # Restore DB entry
- $printer->{DBENTRY} = $dbentry;
- goto step_3_9 if $printer->{MANUALMODEL};
- goto step_3;
- };
+ choose_model($printer, $in) or next;
}
get_printer_info($printer, $in) or next;
- step_5:
- setup_options($printer, $in) or
- goto step_4;
- configure_queue($printer, $in) or die 'wizcancel';
+ setup_options($printer, $in) or next;
+ configure_queue($printer, $in) or next;
undef $printer->{MANUAL} if $printer->{MANUAL};
- $::Wizard_no_previous = 1;
setasdefault($printer, $in);
$cursorpos =
$printer->{configured}{$printer->{QUEUE}}{queuedata}{menuentry} .
($printer->{QUEUE} eq $printer->{DEFAULT} ? N(" (Default)") : '');
my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
- if ($testpages == 1) {
- # User was content with test pages
- # Leave wizard mode with congratulations screen
- wizard_close($in, 1);
- } elsif ($testpages == 2) {
+ if ($testpages == 2) {
# User was not content with test pages
- # Leave wizard mode without congratulations
- # screen
- wizard_close($in, 0);
$editqueue = 1;
$queue = $printer->{QUEUE};
}
};
- wizard_close($in, 0) if $@ =~ /wizcancel/;
- } else {
- $::expert or $printer->{TYPE} = "LOCAL";
- wizard_welcome($printer, $in, $upNetwork) or next;
- !$::expert or choose_printer_type($printer, $in) or next;
- setup_printer_connection($printer, $in, $upNetwork) or next;
- if ($::expert or $printer->{MANUAL} or
- $printer->{MORETHANONE}) {
- choose_printer_name($printer, $in) or next;
- }
- get_db_entry($printer, $in);
- if (!$::expert and !$printer->{MANUAL}) {
- is_model_correct($printer, $in) or next;
- }
- if ($::expert or $printer->{MANUAL} or
- $printer->{MANUALMODEL}) {
- choose_model($printer, $in) or next;
- }
- get_printer_info($printer, $in) or next;
- setup_options($printer, $in) or next;
- configure_queue($printer, $in) or next;
undef $printer->{MANUAL} if $printer->{MANUAL};
- setasdefault($printer, $in);
- $cursorpos =
- $printer->{configured}{$printer->{QUEUE}}{queuedata}{menuentry} .
- ($printer->{QUEUE} eq $printer->{DEFAULT} ? N(" (Default)") : '');
- my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
- if ($testpages == 2) {
- # User was not content with test pages
- $editqueue = 1;
- $queue = $printer->{QUEUE};
- }
- };
- undef $printer->{MANUAL} if $printer->{MANUAL};
- } else {
- $printer->{NEW} = 0;
- # Modify a queue, ask which part should be modified
-# $in->set_help('modifyPrinterMenu') if $::isInstall;
- # Get some info to display
- my $infoline;
- if ($printer->{configured}{$queue}) {
- # Here we must regenerate the menu entry, because the
- # parameters can be changed.
- printer::main::make_menuentry($printer,$queue);
- $printer->{configured}{$queue}{queuedata}{menuentry} =~
- /!([^!]+)$/;
- $infoline = $1 .
- ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') .
- ($printer->{configured}{$queue}{queuedata}{desc} ?
- ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') .
- ($printer->{configured}{$queue}{queuedata}{loc} ?
- ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') .
- ($::expert ?
- ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : '');
} else {
- # The parameters of a remote CUPS queue cannot be changed,
- # so we can simply take the menu entry.
- $cursorpos =~ /!([^!]+)$/;
- $infoline = $1;
- }
- if ($in->ask_from_(
+ $printer->{NEW} = 0;
+ # Modify a queue, ask which part should be modified
+# $in->set_help('modifyPrinterMenu') if $::isInstall;
+ # Get some info to display
+ my $infoline;
+ if ($printer->{configured}{$queue}) {
+ # Here we must regenerate the menu entry, because the
+ # parameters can be changed.
+ printer::main::make_menuentry($printer,$queue);
+ $printer->{configured}{$queue}{queuedata}{menuentry} =~
+ /!([^!]+)$/;
+ $infoline = $1 .
+ ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') .
+ ($printer->{configured}{$queue}{queuedata}{desc} ?
+ ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') .
+ ($printer->{configured}{$queue}{queuedata}{loc} ?
+ ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') .
+ ($::expert ?
+ ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : '');
+ } else {
+ # The parameters of a remote CUPS queue cannot be
+ # changed, so we can simply take the menu entry.
+ $cursorpos =~ /!([^!]+)$/;
+ $infoline = $1;
+ }
+ if ($in->ask_from_(
{ title => N("Modify printer configuration"),
messages =>
- N("Printer %s
+ N("Printer %s
What do you want to modify on this printer?",
$infoline),
- cancel => N("Close"),
- ok => N("Do it!")
+ cancel => N("Close"),
+ ok => N("Do it!")
},
[ { val => \$modify, format => \&translate,
type => 'list',
@@ -3877,151 +3879,153 @@ What do you want to modify on this printer?",
N("Remove this printer from Star Office/OpenOffice.org/GIMP")),
N("Print test pages"),
N("Learn how to use this printer"),
- if_($printer->{configured}{$queue}, N("Remove printer")) ] } ])) {
- # Stay in the queue edit window until the user clicks
- # "Close" or deletes the queue
- $editqueue = 1;
- #- Copy the queue data and work on the copy
- $printer->{currentqueue} = {};
- my $driver;
- if ($printer->{configured}{$queue}) {
- printer::main::copy_printer_params($printer->{configured}{$queue}{queuedata}, $printer->{currentqueue});
- #- Keep in mind the printer driver which was used, so it
- #- can be determined whether the driver is only
- #- available in expert and so for setting the options
- #- for the driver in recommended mode a special
- #- treatment has to be applied.
- $driver = $printer->{currentqueue}{driver};
- }
- #- keep in mind old name of queue (in case of changing)
- $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
- #- Reset some variables
- $printer->{OLD_CHOICE} = undef;
- $printer->{DBENTRY} = undef;
- #- Which printer type did we have before (check beginning of
- #- URI)
- if ($printer->{configured}{$queue}) {
- foreach my $type (qw(file lpd socket smb ncp postpipe)) {
- if ($printer->{currentqueue}{connect} =~ /^$type:/) {
- $printer->{TYPE} =
- ($type eq 'file' ? 'LOCAL' : uc($type));
- last;
+ if_($printer->{configured}{$queue}, N("Remove printer")) ] } ])) {
+ # Stay in the queue edit window until the user clicks
+ # "Close" or deletes the queue
+ $editqueue = 1;
+ #- Copy the queue data and work on the copy
+ $printer->{currentqueue} = {};
+ my $driver;
+ if ($printer->{configured}{$queue}) {
+ printer::main::copy_printer_params($printer->{configured}{$queue}{queuedata}, $printer->{currentqueue});
+ #- Keep in mind the printer driver which was
+ #- used, so it can be determined whether the
+ #- driver is only available in expert and so
+ #- for setting the options for the driver in
+ #- recommended mode a special treatment has
+ #- to be applied.
+ $driver = $printer->{currentqueue}{driver};
+ }
+ #- keep in mind old name of queue (in case of changing)
+ $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
+ #- Reset some variables
+ $printer->{OLD_CHOICE} = undef;
+ $printer->{DBENTRY} = undef;
+ #- Which printer type did we have before (check
+ #- beginning of URI)
+ if ($printer->{configured}{$queue}) {
+ foreach my $type (qw(file lpd socket smb ncp postpipe)) {
+ if ($printer->{currentqueue}{connect} =~ /^$type:/) {
+ $printer->{TYPE} =
+ ($type eq 'file' ? 'LOCAL' : uc($type));
+ last;
+ }
}
}
- }
- # Do the chosen task
- if ($modify eq N("Printer connection type")) {
- choose_printer_type($printer, $in) &&
- setup_printer_connection($printer, $in, $upNetwork) &&
+ # Do the chosen task
+ if ($modify eq N("Printer connection type")) {
+ choose_printer_type($printer, $in) &&
+ setup_printer_connection($printer, $in, $upNetwork) &&
configure_queue($printer, $in);
- } elsif ($modify eq N("Printer name, description, location")) {
- choose_printer_name($printer, $in) &&
- configure_queue($printer, $in);
- # Delete old queue when it was renamed
- if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
- my $_w = $in->wait_message(
- N("Printerdrake"),
- N("Removing old printer \"%s\"...",
- $printer->{OLD_QUEUE}));
- printer::main::remove_queue($printer, $printer->{OLD_QUEUE});
- # If the default printer was renamed, correct the
- # the default printer setting of the spooler
- if ($queue eq $printer->{DEFAULT}) {
- $printer->{DEFAULT} = $printer->{QUEUE};
- printer::default::set_printer($printer);
+ } elsif ($modify eq N("Printer name, description, location")) {
+ choose_printer_name($printer, $in) &&
+ configure_queue($printer, $in);
+ # Delete old queue when it was renamed
+ if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
+ my $_w = $in->wait_message(
+ N("Printerdrake"),
+ N("Removing old printer \"%s\"...",
+ $printer->{OLD_QUEUE}));
+ printer::main::remove_queue($printer, $printer->{OLD_QUEUE});
+ # If the default printer was renamed, correct the
+ # the default printer setting of the spooler
+ if ($queue eq $printer->{DEFAULT}) {
+ $printer->{DEFAULT} = $printer->{QUEUE};
+ printer::default::set_printer($printer);
+ }
+ $queue = $printer->{QUEUE};
}
- $queue = $printer->{QUEUE};
- }
- } elsif ($modify eq N("Printer manufacturer, model, driver") ||
- $modify eq N("Printer manufacturer, model")) {
- get_db_entry($printer, $in);
- choose_model($printer, $in) &&
+ } elsif ($modify eq N("Printer manufacturer, model, driver") ||
+ $modify eq N("Printer manufacturer, model")) {
+ get_db_entry($printer, $in);
+ choose_model($printer, $in) &&
+ get_printer_info($printer, $in) &&
+ setup_options($printer, $in) &&
+ configure_queue($printer, $in);
+ } elsif ($modify eq N("Printer options")) {
get_printer_info($printer, $in) &&
- setup_options($printer, $in) &&
- configure_queue($printer, $in);
- } elsif ($modify eq N("Printer options")) {
- get_printer_info($printer, $in) &&
- setup_options($printer, $in) &&
- configure_queue($printer, $in);
- } elsif ($modify eq N("Set this printer as the default")) {
- $printer->{DEFAULT} = $queue;
- printer::default::set_printer($printer);
- $in->ask_warn(N("Default printer"),
- N("The printer \"%s\" is set as the default printer now.", $queue));
- } elsif ($modify eq N("Add this printer to Star Office/OpenOffice.org/GIMP")) {
- $in->ask_warn(N("Adding printer to Star Office/OpenOffice.org/GIMP"),
- printer::main::addcupsremotetoapplications($printer, $queue) ?
- N("The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP.", $queue) :
- N("Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP.", $queue));
- } elsif ($modify eq N("Remove this printer from Star Office/OpenOffice.org/GIMP")) {
- $in->ask_warn(N("Removing printer from Star Office/OpenOffice.org/GIMP"),
- printer::main::removeprinterfromapplications($printer, $queue) ?
- N("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP.", $queue) :
- N("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP.", $queue));
- } elsif ($modify eq N("Print test pages")) {
- print_testpages($printer, $in, $upNetwork);
- } elsif ($modify eq N("Learn how to use this printer")) {
- printer_help($printer, $in);
- } elsif ($modify eq N("Remove printer")) {
- if ($in->ask_yesorno('',
- N("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
- {
- my $_w = $in->wait_message(
- N("Printerdrake"),
- N("Removing printer \"%s\"...", $queue));
- if (printer::main::remove_queue($printer, $queue)) {
- $editqueue = 0;
- # Define a new default printer if we have
- # removed the default one
- if ($queue eq $printer->{DEFAULT}) {
- my @k = sort(keys %{$printer->{configured}});
- $printer->{DEFAULT} = $k[0];
- printer::default::set_printer($printer) if @k;
+ setup_options($printer, $in) &&
+ configure_queue($printer, $in);
+ } elsif ($modify eq N("Set this printer as the default")) {
+ $printer->{DEFAULT} = $queue;
+ printer::default::set_printer($printer);
+ $in->ask_warn(N("Default printer"),
+ N("The printer \"%s\" is set as the default printer now.", $queue));
+ } elsif ($modify eq N("Add this printer to Star Office/OpenOffice.org/GIMP")) {
+ $in->ask_warn(N("Adding printer to Star Office/OpenOffice.org/GIMP"),
+ printer::main::addcupsremotetoapplications($printer, $queue) ?
+ N("The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP.", $queue) :
+ N("Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP.", $queue));
+ } elsif ($modify eq N("Remove this printer from Star Office/OpenOffice.org/GIMP")) {
+ $in->ask_warn(N("Removing printer from Star Office/OpenOffice.org/GIMP"),
+ printer::main::removeprinterfromapplications($printer, $queue) ?
+ N("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP.", $queue) :
+ N("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP.", $queue));
+ } elsif ($modify eq N("Print test pages")) {
+ print_testpages($printer, $in, $upNetwork);
+ } elsif ($modify eq N("Learn how to use this printer")) {
+ printer_help($printer, $in);
+ } elsif ($modify eq N("Remove printer")) {
+ if ($in->ask_yesorno('',
+ N("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
+ {
+ my $_w = $in->wait_message(
+ N("Printerdrake"),
+ N("Removing printer \"%s\"...", $queue));
+ if (printer::main::remove_queue($printer, $queue)) {
+ $editqueue = 0;
+ # Define a new default printer if we have
+ # removed the default one
+ if ($queue eq $printer->{DEFAULT}) {
+ my @k = sort(keys %{$printer->{configured}});
+ $printer->{DEFAULT} = $k[0];
+ printer::default::set_printer($printer) if @k;
+ }
+ # Let the main menu cursor go to the default position
+ $cursorpos = "::";
}
- # Let the main menu cursor go to the default position
- $cursorpos = "::";
}
}
}
- }
- # Make sure that the cursor is still at the same position
- # in the main menu when one has modified something on the
- # current printer
- if ($printer->{QUEUE} && $printer->{QUEUE} ne "") {
- if ($printer->{configured}{$printer->{QUEUE}}) {
- $cursorpos =
- $printer->{configured}{$printer->{QUEUE}}{queuedata}{menuentry} .
- if_($printer->{QUEUE} eq $printer->{DEFAULT}, N(" (Default)"));
- } else {
- my $s1 = N(" (Default)");
- my $s2 = $s1;
- $s2 =~ s/\(/\\\(/;
- $s2 =~ s/\)/\\\)/;
- $cursorpos .= $s1 if $printer->{QUEUE} eq $printer->{DEFAULT} && $cursorpos !~ /$s2/;
+ # Make sure that the cursor is still at the same position
+ # in the main menu when one has modified something on the
+ # current printer
+ if ($printer->{QUEUE} && $printer->{QUEUE} ne "") {
+ if ($printer->{configured}{$printer->{QUEUE}}) {
+ $cursorpos =
+ $printer->{configured}{$printer->{QUEUE}}{queuedata}{menuentry} .
+ if_($printer->{QUEUE} eq $printer->{DEFAULT}, N(" (Default)"));
+ } else {
+ my $s1 = N(" (Default)");
+ my $s2 = $s1;
+ $s2 =~ s/\(/\\\(/;
+ $s2 =~ s/\)/\\\)/;
+ $cursorpos .= $s1 if $printer->{QUEUE} eq $printer->{DEFAULT} && $cursorpos !~ /$s2/;
+ }
}
- }
- } else { $editqueue = 0 }
- }
-
- # Configure the current printer queue in applications
- my $_w = $in->wait_message(N("Printerdrake"),
- N("Configuring applications..."));
- printer::main::configureapplications($printer);
- undef $_w;
+ } else { $editqueue = 0 }
+ }
- # Delete some variables
- foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)){
- $printer->{$_} = "";
+ # Configure the current printer queue in applications
+ my $_w = $in->wait_message(N("Printerdrake"),
+ N("Configuring applications..."));
+ printer::main::configureapplications($printer);
+ undef $_w;
+
+ # Delete some variables
+ foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)){
+ $printer->{$_} = "";
+ }
+ $printer->{currentqueue} = {};
+ $printer->{complete} = 0;
}
- $printer->{currentqueue} = {};
- $printer->{complete} = 0;
}
# Clean up the $printer data structure for auto-install log
foreach my $queue (keys %{$printer->{configured}}) {
foreach my $item (keys %{$printer->{configured}{$queue}}) {
- delete($printer->{configured}{$queue}{$item}) if $item ne "queuedata";
+ delete($printer->{configured}{$queue}{$item}) if $item ne "queuedata";
}
- delete($printer->{configured}{$queue}{queuedata}{menuentry});
+ delete($printer->{configured}{$queue}{queuedata}{menuentry});
}
foreach (qw(Old_queue QUEUE TYPE str_type currentqueue DBENTRY ARGS complete OLD_CHOICE NEW MORETHANONE MANUALMODEL AUTODETECT AUTODETECTLOCAL AUTODETECTNETWORK AUTODETECTSMB))
{ delete $printer->{$_} };