corrected a problem with a help string

and added turkish po file

3 files changed, 375 insertions, 372 deletions

diff --git a/perl-install/help.pm b/perl-install/help.pm
index 1967f35b5..ba1d8bfd3 100644
--- a/perl-install/help.pm
+++ b/perl-install/help.pm
@@ -150,60 +150,6 @@ selectKeyboard =>
 selectPath => 
  __("Choose \"Installation\" if there are no previous versions of Linux
 installed, or if you wish use to multiple distributions or versions.
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
-  - Beginner: If you have not installed Linux before, or wish to install
-the distribution elected \"Product of the year\" for 1999, click here.
-  - Developer: If you are familiar with Linux and will be using the
-computer primarily for software development, you will find happiness
-here.
-  - Server: If you wish to install a general purpose server, or the
-Linux distribution elected \"Distribution/Server\" for 1999, select
-this.
-  - Expert: If you know GNU/Linux and want to perform a highly
 
 Choose \"Update\" if you wish to update a previous version of Mandrake
 Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."),
diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
index 4011d23f2..308696927 100644
--- a/perl-install/share/po/Changelog
+++ b/perl-install/share/po/Changelog
@@ -1,3 +1,8 @@
+1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
+	* tr.po: Added Turkish language file from
+	Hakan Terzioðlu <hakan@gelecek.com.tr>
+	* it.po: updated italian file
+
 1999-09-13  Pablo Saratxaga <pablo@mandrakesoft.com>
 	* it.po: added italian language file from
 	"Paolo Lorenzin" <pasusu@tin.it>
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index b63840303..7621ec27e 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: panoramix VERSION\n"
-"POT-Creation-Date: 1999-09-14 17:18+0200\n"
+"POT-Creation-Date: 1999-09-18 17:36+0200\n"
 "PO-Revision-Date: 1999-08-25 11:07+0200\n"
 "Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
 "Language-Team: norwegian\n"
@@ -17,144 +17,157 @@ msgstr ""
 msgid "Choose a graphic card"
 msgstr "Velg et grafikk-kort"
 
-#: ../Xconfigurator.pm_.c:179
+#: ../Xconfigurator.pm_.c:158
+#, fuzzy
+msgid "Choose a X server"
+msgstr "Velg ny størrelse"
+
+#: ../Xconfigurator.pm_.c:180
 msgid "Select the memory size of your graphic card"
 msgstr ""
 
-#: ../Xconfigurator.pm_.c:192
+#: ../Xconfigurator.pm_.c:193
 msgid "Choose a monitor"
 msgstr "Velg en monitor"
 
-#: ../Xconfigurator.pm_.c:225
+#: ../Xconfigurator.pm_.c:203
+msgid "Horizontal refresh rate"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:203
+msgid "Vertical refresh rate"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:240
 #, fuzzy
 msgid "Monitor not configured"
 msgstr "Monitoren er ikke konfigurert ennå"
 
-#: ../Xconfigurator.pm_.c:228
+#: ../Xconfigurator.pm_.c:243
 msgid "Graphic card not configured yet"
 msgstr "Grafikk-kortet er ikke konfigurert ennå"
 
-#: ../Xconfigurator.pm_.c:231
+#: ../Xconfigurator.pm_.c:246
 msgid "Resolutions not chosen yet"
 msgstr "Oppløsninger er ikke valgt ennå"
 
-#: ../Xconfigurator.pm_.c:238
+#: ../Xconfigurator.pm_.c:253
 #, fuzzy
 msgid "Do you want to test the configuration?"
 msgstr "Vil du teste konfigurasjonen?"
 
-#: ../Xconfigurator.pm_.c:238
+#: ../Xconfigurator.pm_.c:253
 msgid "Test configuration"
 msgstr "Test konfigurasjon"
 
-#: ../Xconfigurator.pm_.c:270
+#: ../Xconfigurator.pm_.c:285
 #, c-format
 msgid "(leaving in %d seconds)"
 msgstr "(slutter om %d sekunder)"
 
-#: ../Xconfigurator.pm_.c:274
+#: ../Xconfigurator.pm_.c:289
 msgid "Is this ok?"
 msgstr "Er dette ok?"
 
-#: ../Xconfigurator.pm_.c:282
+#: ../Xconfigurator.pm_.c:297
 msgid "An error occurred, try changing some parameters"
 msgstr "En feil oppsto, prøv å endre noen parametere"
 
-#: ../Xconfigurator.pm_.c:290 ../Xconfigurator.pm_.c:430
+#: ../Xconfigurator.pm_.c:305 ../Xconfigurator.pm_.c:448
 msgid "Automatic resolutions"
 msgstr "Automatiske oppløsninger"
 
-#: ../Xconfigurator.pm_.c:334 ../install_steps_interactive.pm_.c:368
-#: ../install_steps_interactive.pm_.c:369
+#: ../Xconfigurator.pm_.c:349 ../install_steps_interactive.pm_.c:376
+#: ../install_steps_interactive.pm_.c:377
 msgid "Resolution"
 msgstr "Oppløsning"
 
-#: ../Xconfigurator.pm_.c:365
+#: ../Xconfigurator.pm_.c:380
 msgid "Choose resolution and color depth"
 msgstr "Velg oppløsning og fargedybde"
 
-#: ../Xconfigurator.pm_.c:612
+#: ../Xconfigurator.pm_.c:638
 #, c-format
 msgid "Keyboard layout: %s\n"
 msgstr "Tastatur-layout: %s\n"
 
-#: ../Xconfigurator.pm_.c:613
+#: ../Xconfigurator.pm_.c:639
 #, c-format
 msgid "Mouse type: %s\n"
 msgstr "Type mus: %s\n"
 
-#: ../Xconfigurator.pm_.c:614
+#: ../Xconfigurator.pm_.c:640
 #, c-format
 msgid "Mouse device: %s\n"
 msgstr "Enhet mus: %s\n"
 
-#: ../Xconfigurator.pm_.c:615
+#: ../Xconfigurator.pm_.c:641
 #, c-format
 msgid "Monitor: %s\n"
 msgstr "Monitor: %s\n"
 
-#: ../Xconfigurator.pm_.c:616
+#: ../Xconfigurator.pm_.c:642
 #, c-format
 msgid "Monitor HorizSync: %s\n"
 msgstr "Monitor HorizSync: %s\n"
 
-#: ../Xconfigurator.pm_.c:617
+#: ../Xconfigurator.pm_.c:643
 #, c-format
 msgid "Monitor VertRefresh: %s\n"
 msgstr "Monitor VertRefresh: %s\n"
 
-#: ../Xconfigurator.pm_.c:618
+#: ../Xconfigurator.pm_.c:644
 #, c-format
 msgid "Graphic card: %s\n"
 msgstr "Grafikk-kort: %s\n"
 
-#: ../Xconfigurator.pm_.c:619
+#: ../Xconfigurator.pm_.c:645
 #, c-format
 msgid "Graphic memory: %s KB\n"
 msgstr "Minne grafikk: %s KB\n"
 
-#: ../Xconfigurator.pm_.c:620
+#: ../Xconfigurator.pm_.c:646
 #, c-format
 msgid "XFree86 server: %s\n"
 msgstr "XFree86 tjener: %s\n"
 
-#: ../Xconfigurator.pm_.c:645
+#: ../Xconfigurator.pm_.c:671
 msgid "Change Monitor"
 msgstr "Endre monitor"
 
-#: ../Xconfigurator.pm_.c:646
+#: ../Xconfigurator.pm_.c:672
 msgid "Change Graphic card"
 msgstr "Endre grafikk-kort"
 
-#: ../Xconfigurator.pm_.c:647
+#: ../Xconfigurator.pm_.c:673
 msgid "Change Resolution"
 msgstr "Endre oppløsning"
 
-#: ../Xconfigurator.pm_.c:648
+#: ../Xconfigurator.pm_.c:674
 msgid "Automatical resolutions search"
 msgstr "Automatisk oppløsningssøk"
 
-#: ../Xconfigurator.pm_.c:652
+#: ../Xconfigurator.pm_.c:678
 msgid "Show information"
 msgstr "Vis informasjon"
 
-#: ../Xconfigurator.pm_.c:653
+#: ../Xconfigurator.pm_.c:679
 msgid "Test again"
 msgstr "Test igjen"
 
-#: ../Xconfigurator.pm_.c:654
+#: ../Xconfigurator.pm_.c:680
 msgid "Quit"
 msgstr "Slutt"
 
-#: ../Xconfigurator.pm_.c:657
+#: ../Xconfigurator.pm_.c:683
 msgid "What do you want to do?"
 msgstr "Hva vil du gjøre?"
 
-#: ../Xconfigurator.pm_.c:662
+#: ../Xconfigurator.pm_.c:688
 msgid "X at startup"
 msgstr "X ved oppstart"
 
-#: ../Xconfigurator.pm_.c:668
+#: ../Xconfigurator.pm_.c:694
 msgid "X successfully configured"
 msgstr "Konfigurasjon av X vellykket"
 
@@ -162,6 +175,10 @@ msgstr "Konfigurasjon av X vellykket"
 msgid "256 colors"
 msgstr "256 farger"
 
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors"
+msgstr "32 tusen farger"
+
 #: ../Xconfigurator_consts.pm_.c:6
 msgid "65 thousand colors"
 msgstr "65 tusen farger"
@@ -174,231 +191,231 @@ msgstr "16 millioner farger"
 msgid "4 billion colors"
 msgstr "4 milliarder farger"
 
-#: ../Xconfigurator_consts.pm_.c:19
+#: ../Xconfigurator_consts.pm_.c:20
 msgid "256 kb"
 msgstr "256 kb"
 
-#: ../Xconfigurator_consts.pm_.c:20
+#: ../Xconfigurator_consts.pm_.c:21
 msgid "512 kb"
 msgstr "512 kb"
 
-#: ../Xconfigurator_consts.pm_.c:21
+#: ../Xconfigurator_consts.pm_.c:22
 msgid "1 mb"
 msgstr "1 mb"
 
-#: ../Xconfigurator_consts.pm_.c:22
+#: ../Xconfigurator_consts.pm_.c:23
 msgid "2 mb"
 msgstr "2 mb"
 
-#: ../Xconfigurator_consts.pm_.c:23
+#: ../Xconfigurator_consts.pm_.c:24
 msgid "4 mb"
 msgstr "4 mb"
 
-#: ../Xconfigurator_consts.pm_.c:24
+#: ../Xconfigurator_consts.pm_.c:25
 msgid "8 mb"
 msgstr "8 mb"
 
-#: ../Xconfigurator_consts.pm_.c:25
+#: ../Xconfigurator_consts.pm_.c:26
 msgid "16 mb or more"
 msgstr "16 mb eller mer"
 
-#: ../Xconfigurator_consts.pm_.c:29
+#: ../Xconfigurator_consts.pm_.c:30 ../Xconfigurator_consts.pm_.c:31
 msgid "Standard VGA, 640x480 at 60 Hz"
 msgstr "Standard VGA, 640x480 i 60 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:30
+#: ../Xconfigurator_consts.pm_.c:32
 msgid "Super VGA, 800x600 at 56 Hz"
 msgstr "Super VGA 800x600 i 56 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:31
+#: ../Xconfigurator_consts.pm_.c:33
 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
 msgstr "8514 kompatibel, 1024x768 i 87 Hz interlaced (ikke 800x600)"
 
-#: ../Xconfigurator_consts.pm_.c:32
+#: ../Xconfigurator_consts.pm_.c:34
 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
 msgstr "Super VGA, 1024x768 i 87 Hz interlaced, 800x600 i 56 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:33
+#: ../Xconfigurator_consts.pm_.c:35
 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
 msgstr "Utvidet Super VGA, 800x600 i 60 Hz, 640x480 i 72 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:34
+#: ../Xconfigurator_consts.pm_.c:36
 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
 msgstr "Ikke-interlaced SVGA, 1024x768 i 60 Hz, 800x600 i 72 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:35
+#: ../Xconfigurator_consts.pm_.c:37
 msgid "High Frequency SVGA, 1024x768 at 70 Hz"
 msgstr "Høyfrekvens SVGA, 1024x768 i 70 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:36
+#: ../Xconfigurator_consts.pm_.c:38
 msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
 msgstr "Flerfrekvens som kan klare 1280x1024 i 60 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:37
+#: ../Xconfigurator_consts.pm_.c:39
 msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
 msgstr "Flerfrekvens som kan klare 1280x1024 i 74 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:38
+#: ../Xconfigurator_consts.pm_.c:40
 msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
 msgstr "Flerfrekvens som kan klare 1280x1024 i 76 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:39
+#: ../Xconfigurator_consts.pm_.c:41
 msgid "Monitor that can do 1600x1200 at 70 Hz"
 msgstr "Monitor som kan klare 1600x1200 i 70 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:40
+#: ../Xconfigurator_consts.pm_.c:42
 msgid "Monitor that can do 1600x1200 at 76 Hz"
 msgstr "Monitor som kan klare 1600x1200 i 76 Hz"
 
-#: ../Xconfigurator_consts.pm_.c:45
+#: ../Xconfigurator_consts.pm_.c:65
 msgid "No RAMDAC Setting (recommended)"
 msgstr "Ingen RAMDAC innstilling (anbefalt)"
 
-#: ../Xconfigurator_consts.pm_.c:46
+#: ../Xconfigurator_consts.pm_.c:66
 msgid "AT&T 20C490 (S3 and AGX servers, ARK driver)"
 msgstr "AT&T 20C490 (S3 og AGX tjenere, ARK driver)"
 
-#: ../Xconfigurator_consts.pm_.c:47
+#: ../Xconfigurator_consts.pm_.c:67
 msgid "AT&T 20C498/21C498/22C498 (S3, autodetected)"
 msgstr "AT&T 20C498/21C498/22C498 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:48
+#: ../Xconfigurator_consts.pm_.c:68
 msgid "AT&T 20C409/20C499 (S3, autodetected)"
 msgstr "AT&T 20C409/20C499 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:49
+#: ../Xconfigurator_consts.pm_.c:69
 msgid "AT&T 20C505 (S3)"
 msgstr "AT&T 20C505 (S3)"
 
-#: ../Xconfigurator_consts.pm_.c:50
+#: ../Xconfigurator_consts.pm_.c:70
 msgid "BrookTree BT481 (AGX)"
 msgstr "BrookTree BT481 (AGX)"
 
-#: ../Xconfigurator_consts.pm_.c:51
+#: ../Xconfigurator_consts.pm_.c:71
 msgid "BrookTree BT482 (AGX)"
 msgstr "BrookTree BT482 (AGX)"
 
-#: ../Xconfigurator_consts.pm_.c:52
+#: ../Xconfigurator_consts.pm_.c:72
 msgid "BrookTree BT485/9485 (S3)"
 msgstr "BrookTree BT485/9485 (S3)"
 
-#: ../Xconfigurator_consts.pm_.c:53
+#: ../Xconfigurator_consts.pm_.c:73
 msgid "Sierra SC15025 (S3, AGX)"
 msgstr "Sierra SC15025 (S3, AGX)"
 
-#: ../Xconfigurator_consts.pm_.c:54
+#: ../Xconfigurator_consts.pm_.c:74
 msgid "S3 GenDAC (86C708) (autodetected)"
 msgstr "S3 GenDAC (86C708) (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:55
+#: ../Xconfigurator_consts.pm_.c:75
 msgid "S3 SDAC (86C716) (autodetected)"
 msgstr "S3 SDAC (86C716) (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:56
+#: ../Xconfigurator_consts.pm_.c:76
 msgid "STG-1700 (S3, autodetected)"
 msgstr "STG-1700 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:57
+#: ../Xconfigurator_consts.pm_.c:77
 msgid "STG-1703 (S3, autodetected)"
 msgstr "STG-1703 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:58
+#: ../Xconfigurator_consts.pm_.c:78
 msgid "TI 3020 (S3)"
 msgstr "TI 3020 (S3)"
 
-#: ../Xconfigurator_consts.pm_.c:59
+#: ../Xconfigurator_consts.pm_.c:79
 msgid "TI 3025 (S3, autodetected)"
 msgstr "TI 3025 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:60
+#: ../Xconfigurator_consts.pm_.c:80
 msgid "TI 3026 (S3, autodetected)"
 msgstr "TI 3026 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:61
+#: ../Xconfigurator_consts.pm_.c:81
 msgid "IBM RGB 514 (S3, autodetected)"
 msgstr "IBM RGB 514 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:62
+#: ../Xconfigurator_consts.pm_.c:82
 msgid "IBM RGB 524 (S3, autodetected)"
 msgstr "IBM RGB 524 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:63
+#: ../Xconfigurator_consts.pm_.c:83
 msgid "IBM RGB 525 (S3, autodetected)"
 msgstr "IBM RGB 525 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:64
+#: ../Xconfigurator_consts.pm_.c:84
 msgid "IBM RGB 526 (S3)"
 msgstr "IBM RGB 526 (S3)"
 
-#: ../Xconfigurator_consts.pm_.c:65
+#: ../Xconfigurator_consts.pm_.c:85
 msgid "IBM RGB 528 (S3, autodetected)"
 msgstr "IBM RGB 528 (S3, oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:66
+#: ../Xconfigurator_consts.pm_.c:86
 msgid "ICS5342 (S3, ARK)"
 msgstr "ICS5342 (S3, ARK)"
 
-#: ../Xconfigurator_consts.pm_.c:67
+#: ../Xconfigurator_consts.pm_.c:87
 msgid "ICS5341 (W32)"
 msgstr "ICS5341 (W32)"
 
-#: ../Xconfigurator_consts.pm_.c:68
+#: ../Xconfigurator_consts.pm_.c:88
 msgid "IC Works w30C516 ZoomDac (ARK)"
 msgstr "IC Works w30C516 ZoomDac (ARK)"
 
-#: ../Xconfigurator_consts.pm_.c:69
+#: ../Xconfigurator_consts.pm_.c:89
 msgid "Normal DAC"
 msgstr "Normal DAC"
 
-#: ../Xconfigurator_consts.pm_.c:73
+#: ../Xconfigurator_consts.pm_.c:93
 msgid "No Clockchip Setting (recommended)"
 msgstr "Ingen Clockchip innstilling (anbefalt)"
 
-#: ../Xconfigurator_consts.pm_.c:74
+#: ../Xconfigurator_consts.pm_.c:94
 msgid "Chrontel 8391"
 msgstr "Chrontel 8391"
 
-#: ../Xconfigurator_consts.pm_.c:75
+#: ../Xconfigurator_consts.pm_.c:95
 msgid "ICD2061A and compatibles (ICS9161A => DCS2824)"
 msgstr "ICD2061A og kompatible (ICS9161A => DCS2824)"
 
-#: ../Xconfigurator_consts.pm_.c:76
+#: ../Xconfigurator_consts.pm_.c:96
 msgid "ICS2595"
 msgstr "ICS2595"
 
-#: ../Xconfigurator_consts.pm_.c:77
+#: ../Xconfigurator_consts.pm_.c:97
 msgid "ICS5342 (similar to SDAC, but not completely compatible)"
 msgstr "ICS5342 (lik SDAC, men ikke helt kompatibel)"
 
-#: ../Xconfigurator_consts.pm_.c:78
+#: ../Xconfigurator_consts.pm_.c:98
 msgid "ICS5341"
 msgstr "ICS5341"
 
-#: ../Xconfigurator_consts.pm_.c:79
+#: ../Xconfigurator_consts.pm_.c:99
 msgid "S3 GenDAC (86C708) and ICS5300 (autodetected)"
 msgstr "S3 GenDAC (86C708) og ICS5300 (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:80
+#: ../Xconfigurator_consts.pm_.c:100
 msgid "S3 SDAC (86C716)"
 msgstr "S3 SDAC (86C716)"
 
-#: ../Xconfigurator_consts.pm_.c:81
+#: ../Xconfigurator_consts.pm_.c:101
 msgid "STG 1703 (autodetected)"
 msgstr "STG 1703 (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:82
+#: ../Xconfigurator_consts.pm_.c:102
 msgid "Sierra SC11412"
 msgstr "Sierra SC11412"
 
-#: ../Xconfigurator_consts.pm_.c:83
+#: ../Xconfigurator_consts.pm_.c:103
 msgid "TI 3025 (autodetected)"
 msgstr "TI 3025 (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:84
+#: ../Xconfigurator_consts.pm_.c:104
 msgid "TI 3026 (autodetected)"
 msgstr "TI 3026 (oppdaget automatisk)"
 
-#: ../Xconfigurator_consts.pm_.c:85
+#: ../Xconfigurator_consts.pm_.c:105
 msgid "IBM RGB 51x/52x (autodetected)"
 msgstr "IBM RGB 51x/52x (oppdaget automatisk)"
 
@@ -418,11 +435,11 @@ msgstr "Slett"
 msgid "Format"
 msgstr "Formater"
 
-#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:373
+#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:374
 msgid "Move"
 msgstr "Flytt"
 
-#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:421
+#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:427
 msgid "Resize"
 msgstr "Endre størrelse"
 
@@ -434,59 +451,59 @@ msgstr "Type"
 msgid "Mount_point"
 msgstr "Monteringspunkt"
 
-#: ../diskdrake.pm_.c:30
+#: ../diskdrake.pm_.c:31
 msgid "Write /etc/fstab"
 msgstr "Skriv /etc/fstab"
 
-#: ../diskdrake.pm_.c:31
+#: ../diskdrake.pm_.c:32
 msgid "Normal > Expert"
 msgstr "Normal > Ekspert"
 
-#: ../diskdrake.pm_.c:32
+#: ../diskdrake.pm_.c:33
 msgid "Expert > Normal"
 msgstr "Expert > Normal"
 
-#: ../diskdrake.pm_.c:33
+#: ../diskdrake.pm_.c:34
 msgid "Restore from file"
 msgstr "Gjenopprett fra fil"
 
-#: ../diskdrake.pm_.c:34
+#: ../diskdrake.pm_.c:35
 msgid "Save in file"
 msgstr "Lagre i fil"
 
-#: ../diskdrake.pm_.c:35
+#: ../diskdrake.pm_.c:36
 msgid "Restore from floppy"
 msgstr "Gjenopprett fra diskett"
 
-#: ../diskdrake.pm_.c:36
+#: ../diskdrake.pm_.c:37
 msgid "Save on floppy"
 msgstr "Lagre på diskett"
 
-#: ../diskdrake.pm_.c:37
+#: ../diskdrake.pm_.c:38
 msgid "Done"
 msgstr "Ferdig"
 
-#: ../diskdrake.pm_.c:40
+#: ../diskdrake.pm_.c:41
 msgid "Clear all"
 msgstr "Fjern alle"
 
-#: ../diskdrake.pm_.c:41
+#: ../diskdrake.pm_.c:42
 msgid "Format all"
 msgstr "Formater alle"
 
-#: ../diskdrake.pm_.c:42
+#: ../diskdrake.pm_.c:43
 msgid "Auto allocate"
 msgstr "Automatisk allokering"
 
-#: ../diskdrake.pm_.c:45
+#: ../diskdrake.pm_.c:46
 msgid "All primary partitions are used"
 msgstr "Alle primære partisjoner er i bruk"
 
-#: ../diskdrake.pm_.c:45
+#: ../diskdrake.pm_.c:46
 msgid "I can't add any more partition"
 msgstr "Jeg kan ikke legge til flere partisjoner"
 
-#: ../diskdrake.pm_.c:45
+#: ../diskdrake.pm_.c:46
 msgid ""
 "To have more partitions, please delete one to be able to create an extended "
 "partition"
@@ -494,81 +511,86 @@ msgstr ""
 "For å ha flere partisjoner vennligst slett en for å kunne opprette en "
 "utvidet partisjon"
 
-#: ../diskdrake.pm_.c:48
+#: ../diskdrake.pm_.c:49
+#, fuzzy
+msgid "Rescue partition table"
+msgstr "Skriv partisjonstabell"
+
+#: ../diskdrake.pm_.c:50
 msgid "Undo"
 msgstr "Angre"
 
-#: ../diskdrake.pm_.c:49
+#: ../diskdrake.pm_.c:51
 msgid "Write partition table"
 msgstr "Skriv partisjonstabell"
 
-#: ../diskdrake.pm_.c:118
+#: ../diskdrake.pm_.c:119
 #, c-format
 msgid "After %s partition %s,"
 msgstr "Etter %s partisjon %s,"
 
-#: ../diskdrake.pm_.c:118 ../diskdrake.pm_.c:364 ../diskdrake.pm_.c:391
+#: ../diskdrake.pm_.c:119 ../diskdrake.pm_.c:365 ../diskdrake.pm_.c:392
 msgid "Read carefully!"
 msgstr "Les nøye!"
 
-#: ../diskdrake.pm_.c:118
+#: ../diskdrake.pm_.c:119
 msgid "all data on this partition will be lost"
 msgstr "alle data på denne partisjonen vil gå tapt"
 
-#: ../diskdrake.pm_.c:136 ../install2.pm_.c:401 ../install_steps.pm_.c:65
+#: ../diskdrake.pm_.c:137 ../install2.pm_.c:252 ../install_steps.pm_.c:65
 #: ../install_steps_interactive.pm_.c:35
 msgid "Error"
 msgstr "Feil"
 
-#: ../diskdrake.pm_.c:157 ../diskdrake.pm_.c:489
+#: ../diskdrake.pm_.c:158 ../diskdrake.pm_.c:504
 msgid "Mount point: "
 msgstr "Monteringspunkt: "
 
-#: ../diskdrake.pm_.c:158 ../diskdrake.pm_.c:180
+#: ../diskdrake.pm_.c:159 ../diskdrake.pm_.c:181
 msgid "Device: "
 msgstr "Enhet: "
 
-#: ../diskdrake.pm_.c:159
+#: ../diskdrake.pm_.c:160
 #, fuzzy, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS bokstav: %s (bare en gjetning)\n"
 
-#: ../diskdrake.pm_.c:160 ../diskdrake.pm_.c:183
+#: ../diskdrake.pm_.c:161 ../diskdrake.pm_.c:184
 msgid "Type: "
 msgstr "Type: "
 
-#: ../diskdrake.pm_.c:161
+#: ../diskdrake.pm_.c:162
 #, c-format
 msgid "Start: sector /*%s\n"
 msgstr "Start: sektor /*%s\n"
 
-#: ../diskdrake.pm_.c:162
+#: ../diskdrake.pm_.c:163
 msgid "Size: %s MB (%s%%)"
 msgstr "Størrelse: %s MB (%s%%)"
 
-#: ../diskdrake.pm_.c:163
+#: ../diskdrake.pm_.c:164
 #, c-format
 msgid ", %s sectors"
 msgstr ", %s sektorer"
 
-#: ../diskdrake.pm_.c:165
+#: ../diskdrake.pm_.c:166
 #, c-format
 msgid "Cylinder %d to cylinder %d\n"
 msgstr "Sylinder %d til sylinder %d\n"
 
-#: ../diskdrake.pm_.c:166
+#: ../diskdrake.pm_.c:167
 msgid "Formatted\n"
 msgstr "Formatert\n"
 
-#: ../diskdrake.pm_.c:167
+#: ../diskdrake.pm_.c:168
 msgid "Not formatted\n"
 msgstr "Ikke formatert\n"
 
-#: ../diskdrake.pm_.c:168
+#: ../diskdrake.pm_.c:169
 msgid "Mounted\n"
 msgstr "Montert\n"
 
-#: ../diskdrake.pm_.c:169
+#: ../diskdrake.pm_.c:170
 msgid ""
 "Partition booted by default\n"
 "    (for MS-DOS boot, not for lilo)\n"
@@ -576,144 +598,148 @@ msgstr ""
 "Partisjon startet opp som standard\n"
 "    (for MS-DOS oppstart, ikke for lilo)\n"
 
-#: ../diskdrake.pm_.c:181
+#: ../diskdrake.pm_.c:182
 #, c-format
 msgid "Size: %d MB\n"
 msgstr "Størrelse: %d MB\n"
 
-#: ../diskdrake.pm_.c:182
+#: ../diskdrake.pm_.c:183
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"
 
-#: ../diskdrake.pm_.c:184
+#: ../diskdrake.pm_.c:185
 #, c-format
 msgid "on bus %d id %d\n"
 msgstr "på buss %d id %d\n"
 
-#: ../diskdrake.pm_.c:196
+#: ../diskdrake.pm_.c:197
 msgid "Mount"
 msgstr "Montere"
 
-#: ../diskdrake.pm_.c:198
+#: ../diskdrake.pm_.c:199
 msgid "Active"
 msgstr "Aktiv"
 
-#: ../diskdrake.pm_.c:304
+#: ../diskdrake.pm_.c:305
 msgid "Leave without saving"
 msgstr "Slutt uten å lagre"
 
-#: ../diskdrake.pm_.c:304
+#: ../diskdrake.pm_.c:305
 #, fuzzy
 msgid "Quit program without writing the partition table?"
 msgstr "Avslutte programmet uten å skrive partisjonstabell?"
 
-#: ../diskdrake.pm_.c:319
+#: ../diskdrake.pm_.c:320
 msgid "changing type of"
 msgstr "endrer type av"
 
-#: ../diskdrake.pm_.c:321
+#: ../diskdrake.pm_.c:322
 msgid "Change partition type"
 msgstr "Endre partisjonstype"
 
-#: ../diskdrake.pm_.c:322
+#: ../diskdrake.pm_.c:323
 msgid "Which partition type do you want?"
 msgstr "Hvilken partisjonstype ønsker du?"
 
-#: ../diskdrake.pm_.c:337
-#, fuzzy
+#: ../diskdrake.pm_.c:338
 msgid "Mount point"
-msgstr "Monteringspunkt: "
+msgstr "Monteringspunkt"
 
-#: ../diskdrake.pm_.c:358
+#: ../diskdrake.pm_.c:359
 msgid "formatting"
 msgstr "formatering"
 
-#: ../diskdrake.pm_.c:364
+#: ../diskdrake.pm_.c:365
 msgid "After formatting all partitions,"
 msgstr "Etter formatering av alle partisjonene"
 
-#: ../diskdrake.pm_.c:364
+#: ../diskdrake.pm_.c:365
 msgid "all data on these partitions will be lost"
 msgstr "alle data på disse partisjonene vil gå tapt"
 
-#: ../diskdrake.pm_.c:374
+#: ../diskdrake.pm_.c:375
 msgid "Which disk do you want to move to?"
 msgstr "Hvilken disk vil du flytte til?"
 
-#: ../diskdrake.pm_.c:378
+#: ../diskdrake.pm_.c:379
 msgid "Sector"
 msgstr "Sektor"
 
-#: ../diskdrake.pm_.c:379
+#: ../diskdrake.pm_.c:380
 msgid "Which sector do you want to move to?"
 msgstr "Hvilken sektor vil du flytte til?"
 
-#: ../diskdrake.pm_.c:382
+#: ../diskdrake.pm_.c:383
 msgid "Moving"
 msgstr "Flytter"
 
-#: ../diskdrake.pm_.c:382
+#: ../diskdrake.pm_.c:383
 msgid "Moving partition..."
 msgstr "Flytter partisjon..."
 
-#: ../diskdrake.pm_.c:391
+#: ../diskdrake.pm_.c:392
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk!"
 msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!"
 
-#: ../diskdrake.pm_.c:393
+#: ../diskdrake.pm_.c:394
 msgid "You'll need to reboot before the modification can take place"
 msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
 
-#: ../diskdrake.pm_.c:412
+#: ../diskdrake.pm_.c:413
 msgid "Computing fat filesystem bounds"
 msgstr "Beregner fat filsystemgrense"
 
-#: ../diskdrake.pm_.c:412 ../diskdrake.pm_.c:448 ../interactive_gtk.pm_.c:200
+#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:455 ../interactive_gtk.pm_.c:201
 msgid "Resizing"
 msgstr "Endrer størrelse"
 
-#: ../diskdrake.pm_.c:418
+#: ../diskdrake.pm_.c:424
 msgid "resizing"
 msgstr "Endrer størrelse"
 
-#: ../diskdrake.pm_.c:428
+#: ../diskdrake.pm_.c:434
 msgid "Choose the new size"
 msgstr "Velg ny størrelse"
 
-#: ../diskdrake.pm_.c:428
+#: ../diskdrake.pm_.c:434
 msgid "MB"
 msgstr "MB"
 
-#: ../diskdrake.pm_.c:466
+#: ../diskdrake.pm_.c:481
 msgid "Create a new partition"
 msgstr "Opprette en ny partisjon"
 
-#: ../diskdrake.pm_.c:482
+#: ../diskdrake.pm_.c:497
 msgid "Start sector: "
 msgstr "Start sektor: "
 
-#: ../diskdrake.pm_.c:485
+#: ../diskdrake.pm_.c:500
 msgid "Size in MB: "
 msgstr "Størrelse i MB: "
 
-#: ../diskdrake.pm_.c:488
+#: ../diskdrake.pm_.c:503
 msgid "Filesystem type: "
 msgstr "Filsystemtype: "
 
-#: ../diskdrake.pm_.c:490
+#: ../diskdrake.pm_.c:505
 msgid "Preference: "
 msgstr "Valg: "
 
-#: ../diskdrake.pm_.c:532 ../diskdrake.pm_.c:548
+#: ../diskdrake.pm_.c:547 ../diskdrake.pm_.c:563
 msgid "Select file"
 msgstr "Velg fil"
 
-#: ../diskdrake.pm_.c:549
+#: ../diskdrake.pm_.c:564
 msgid "Warning"
 msgstr "Advarsel"
 
+#: ../diskdrake.pm_.c:579
+#, fuzzy
+msgid "Searching for your lost partition table"
+msgstr "Skriv partisjonstabell"
+
 #: ../fs.pm_.c:69 ../fs.pm_.c:75
 #, c-format
 msgid "%s formatting of %s failed"
@@ -737,34 +763,34 @@ msgstr "montering mislykket: "
 msgid "error unmounting %s: %s"
 msgstr "feil ved demontering av %s: %s"
 
-#: ../fsedit.pm_.c:44
+#: ../fsedit.pm_.c:49
 #, c-format
 msgid "An error occurred while getting the geometry of block device %s: %s"
 msgstr "En feil oppsto ved henting av geometrien til blokkenhet %s: %s"
 
-#: ../fsedit.pm_.c:123
+#: ../fsedit.pm_.c:128
 msgid "Mount points must begin with a leading /"
 msgstr "Monteringspunkter må begynne med /"
 
-#: ../fsedit.pm_.c:126
+#: ../fsedit.pm_.c:131
 #, c-format
 msgid "There is already a partition with mount point %s"
 msgstr "Det finnes allerede en partisjon med monteringspunkt %s"
 
-#: ../fsedit.pm_.c:250
+#: ../fsedit.pm_.c:255
 #, c-format
 msgid "Error opening %s for writing: %s"
 msgstr "Feil ved åpning av %s for skriving: %s"
 
-#: ../install2.pm_.c:35
+#: ../help.pm_.c:7 ../help.pm_.c:145
 msgid "Choose preferred language for install and system usage."
 msgstr ""
 
-#: ../install2.pm_.c:38
+#: ../help.pm_.c:10 ../help.pm_.c:148
 msgid "Choose on the list of keyboards, the one corresponding to yours"
 msgstr ""
 
-#: ../install2.pm_.c:41
+#: ../help.pm_.c:13 ../help.pm_.c:151
 #, fuzzy
 msgid ""
 "Choose \"Installation\" if there are no previous versions of Linux\n"
@@ -781,7 +807,7 @@ msgstr ""
 "(Venice), 5.2 (Leeloo), 5.3 (Festen) eller\n"
 " 6.0 (Venus)."
 
-#: ../install2.pm_.c:48
+#: ../help.pm_.c:20 ../help.pm_.c:158
 msgid ""
 "Select:\n"
 "  - Beginner: If you have not installed Linux before, or wish to install\n"
@@ -808,7 +834,7 @@ msgstr ""
 "opprettholde\n"
 "kontrollen over installasjonen så er dette valget for deg."
 
-#: ../install2.pm_.c:61
+#: ../help.pm_.c:33 ../help.pm_.c:171
 #, fuzzy
 msgid ""
 "The system did not detect a SCSI card. If you have one (or several)\n"
@@ -831,7 +857,7 @@ msgstr ""
 "under \"System\"\n"
 " i \"Kontrollpanelet\"."
 
-#: ../install2.pm_.c:71
+#: ../help.pm_.c:43 ../help.pm_.c:181
 msgid ""
 "At this point, hard drive partitions must be defined. (Unless you\n"
 "are overwriting a previous install of Linux and have already defined\n"
@@ -846,7 +872,7 @@ msgid ""
 "be. Consult the documentation and take your time before proceeding."
 msgstr ""
 
-#: ../install2.pm_.c:84
+#: ../help.pm_.c:56 ../help.pm_.c:194
 msgid ""
 "Any partitions that have been newly defined must be formatted for\n"
 "use. At this time, you may wish to re-format some pre-existing\n"
@@ -861,7 +887,7 @@ msgstr ""
 "hvis de inneholder data som\n"
 "du ønsker å beholde (typiske tilfeller: / home and / usr/local)."
 
-#: ../install2.pm_.c:91
+#: ../help.pm_.c:63 ../help.pm_.c:201
 msgid ""
 "You may now select the packages you wish to install.\n"
 "\n"
@@ -888,7 +914,7 @@ msgstr ""
 "sone \"Infos\"\n"
 "funnet over knappene til bekreftelse/valg/fjern valg."
 
-#: ../install2.pm_.c:104
+#: ../help.pm_.c:76 ../help.pm_.c:214
 msgid ""
 "The packages selected are now being installed. This operation\n"
 "should only take a few minutes."
@@ -896,13 +922,14 @@ msgstr ""
 "Pakkene som er valgt blir nå installert på systemet ditt. Dette tar bare "
 "noen få minutter."
 
-#: ../install2.pm_.c:108 ../install2.pm_.c:111 ../install2.pm_.c:114
-#: ../install2.pm_.c:117 ../install2.pm_.c:120 ../install2.pm_.c:152
-#: ../install2.pm_.c:167 ../install2.pm_.c:199
+#: ../help.pm_.c:80 ../help.pm_.c:83 ../help.pm_.c:86 ../help.pm_.c:89
+#: ../help.pm_.c:92 ../help.pm_.c:124 ../help.pm_.c:139 ../help.pm_.c:218
+#: ../help.pm_.c:221 ../help.pm_.c:224 ../help.pm_.c:227 ../help.pm_.c:230
+#: ../help.pm_.c:262 ../help.pm_.c:277 ../install2.pm_.c:62
 msgid "Help"
 msgstr "Hjelp"
 
-#: ../install2.pm_.c:123
+#: ../help.pm_.c:95 ../help.pm_.c:233
 msgid ""
 "An administrator password for your Linux system must now be\n"
 "assigned. The password must be entered twice to verify that both\n"
@@ -921,7 +948,7 @@ msgid ""
 "\"password\", type the password that was created here."
 msgstr ""
 
-#: ../install2.pm_.c:140
+#: ../help.pm_.c:112 ../help.pm_.c:250
 msgid ""
 "You can now authorize one or more people to use your Linux\n"
 "system. Each user account will have their own customizable environment.\n"
@@ -935,7 +962,7 @@ msgid ""
 "accomplished from a regular user account."
 msgstr ""
 
-#: ../install2.pm_.c:155
+#: ../help.pm_.c:127 ../help.pm_.c:265
 #, fuzzy
 msgid ""
 "You need to indicate where you wish\n"
@@ -949,7 +976,7 @@ msgstr ""
 "Med mindre du vet akkurat hva du gjør, velg alltid \"Første sektor av "
 "disken\"."
 
-#: ../install2.pm_.c:162
+#: ../help.pm_.c:134 ../help.pm_.c:272
 msgid ""
 "It is now time to configure the video card and monitor\n"
 "configuration for the X Window Graphic User Interface (GUI). First\n"
@@ -957,104 +984,104 @@ msgid ""
 "your selections if necessary."
 msgstr ""
 
-#: ../install2.pm_.c:173
+#: ../install2.pm_.c:36
 msgid "Choose your language"
 msgstr "Velg språk"
 
-#: ../install2.pm_.c:174
+#: ../install2.pm_.c:37
 msgid "Choose install or upgrade"
 msgstr "Velg installering eller oppgradering"
 
-#: ../install2.pm_.c:175
+#: ../install2.pm_.c:38
 msgid "Select installation class"
 msgstr "Velg installasjonsklasse"
 
-#: ../install2.pm_.c:176
+#: ../install2.pm_.c:39
 #, fuzzy
 msgid "Choose your keyboard"
 msgstr "Velg språk"
 
-#: ../install2.pm_.c:177
+#: ../install2.pm_.c:40
 msgid "Setup SCSI"
 msgstr "Oppsett SCSI"
 
-#: ../install2.pm_.c:178
+#: ../install2.pm_.c:41
 msgid "Setup filesystems"
 msgstr "Oppsett filsystemer"
 
-#: ../install2.pm_.c:179
+#: ../install2.pm_.c:42
 msgid "Format partitions"
 msgstr "Formater partisjoner"
 
-#: ../install2.pm_.c:180
+#: ../install2.pm_.c:43
 msgid "Choose packages to install"
 msgstr "Velg pakker for installering"
 
-#: ../install2.pm_.c:181
+#: ../install2.pm_.c:44
 msgid "Install system"
 msgstr "Installer systemet"
 
-#: ../install2.pm_.c:182
+#: ../install2.pm_.c:45
 #, fuzzy
 msgid "Configure mouse"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:183
+#: ../install2.pm_.c:46
 msgid "Configure networking"
 msgstr "Konfigurer nettverk"
 
-#: ../install2.pm_.c:184
+#: ../install2.pm_.c:47
 #, fuzzy
 msgid "Configure timezone"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:186
+#: ../install2.pm_.c:49
 #, fuzzy
 msgid "Configure printer"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:187 ../install_steps_interactive.pm_.c:426
-#: ../install_steps_interactive.pm_.c:427
+#: ../install2.pm_.c:50 ../install_steps_interactive.pm_.c:434
+#: ../install_steps_interactive.pm_.c:435
 msgid "Set root password"
 msgstr "Sett root passord"
 
-#: ../install2.pm_.c:188
+#: ../install2.pm_.c:51
 msgid "Add a user"
 msgstr "Legg til en bruker"
 
-#: ../install2.pm_.c:189
+#: ../install2.pm_.c:52
 msgid "Create bootdisk"
 msgstr "Opprett oppstartdiskett"
 
-#: ../install2.pm_.c:190
+#: ../install2.pm_.c:53
 msgid "Install bootloader"
 msgstr "Installer oppstartslaster"
 
-#: ../install2.pm_.c:191
+#: ../install2.pm_.c:54
 msgid "Configure X"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:192
+#: ../install2.pm_.c:55
 msgid "Exit install"
 msgstr "Gå ut av installering"
 
-#: ../install2.pm_.c:224
+#: ../install2.pm_.c:74
 msgid "beginner"
 msgstr "nybegynner"
 
-#: ../install2.pm_.c:224
+#: ../install2.pm_.c:74
 msgid "developer"
 msgstr "utvikler"
 
-#: ../install2.pm_.c:224
+#: ../install2.pm_.c:74
 msgid "expert"
 msgstr "ekspert"
 
-#: ../install2.pm_.c:224
+#: ../install2.pm_.c:74
 msgid "server"
 msgstr "tjener"
 
-#: ../install2.pm_.c:411
+#: ../install2.pm_.c:263
 msgid ""
 "An error has occurred - no valid devices were found on which to create new "
 "filesystems. Please check your hardware for the cause of this problem"
@@ -1062,80 +1089,86 @@ msgstr ""
 "En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
 "filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
 
-#: ../install2.pm_.c:426
+#: ../install2.pm_.c:278
 msgid "partitioning failed: no root filesystem"
 msgstr "partisjonering feilet: intet root filsystem"
 
-#: ../install2.pm_.c:563
+#: ../install2.pm_.c:415
 msgid "Error reading file $f"
 msgstr "Feil ved lesing av fil $f"
 
-#: ../install2.pm_.c:568
+#: ../install2.pm_.c:420
 #, fuzzy, c-format
 msgid "Bad kickstart file %s (failed %s)"
 msgstr "Gjenoppretting fra fil %s mislykket: %s"
 
-#: ../install_steps.pm_.c:264
+#: ../install_steps.pm_.c:268
 msgid "no floppy available"
 msgstr ""
 
-#: ../install_steps_graphical.pm_.c:195
+#: ../install_steps_graphical.pm_.c:285
 msgid "Hide"
 msgstr "Gjem"
 
-#: ../install_steps_graphical.pm_.c:195
+#: ../install_steps_graphical.pm_.c:285
 msgid "Show All"
 msgstr "Vis alle"
 
-#: ../install_steps_graphical.pm_.c:199
+#: ../install_steps_graphical.pm_.c:289
 msgid "Select All"
 msgstr "Velg alle"
 
-#: ../install_steps_graphical.pm_.c:199
+#: ../install_steps_graphical.pm_.c:289
 msgid "Unselect All"
 msgstr "Fjern alle"
 
-#: ../install_steps_graphical.pm_.c:266
+#: ../install_steps_graphical.pm_.c:356
 msgid "Choose the packages you want to install"
 msgstr "Velg pakker du ønsker å installere"
 
-#: ../install_steps_graphical.pm_.c:277
+#: ../install_steps_graphical.pm_.c:367
 msgid " Mb"
 msgstr "Mb"
 
-#: ../install_steps_graphical.pm_.c:277
+#: ../install_steps_graphical.pm_.c:367
 msgid "Total size: "
 msgstr "Total størrelse: "
 
-#: ../install_steps_graphical.pm_.c:278
+#: ../install_steps_graphical.pm_.c:368
 msgid "Info"
 msgstr ""
 
-#: ../install_steps_graphical.pm_.c:304
+#: ../install_steps_graphical.pm_.c:394
 msgid "Installing"
 msgstr "Installerer"
 
-#: ../install_steps_graphical.pm_.c:310
+#: ../install_steps_graphical.pm_.c:400
 msgid "Please wait, "
 msgstr "Vennligst vent, "
 
-#: ../install_steps_graphical.pm_.c:312
+#: ../install_steps_graphical.pm_.c:402
 msgid "Time remaining "
 msgstr "Tid som gjenstår "
 
-#: ../install_steps_graphical.pm_.c:313
+#: ../install_steps_graphical.pm_.c:403
 msgid "Total time "
 msgstr "Total tid "
 
-#: ../install_steps_graphical.pm_.c:318
+#: ../install_steps_graphical.pm_.c:408
 msgid "preparing installation"
 msgstr "forbereder installasjon"
 
-#: ../install_steps_graphical.pm_.c:339
+#: ../install_steps_graphical.pm_.c:429
 #, c-format
 msgid "installing package %s"
 msgstr "installerer pakke %s"
 
+#: ../install_steps_graphical.pm_.c:542 ../interactive.pm_.c:47
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:182 ../my_gtk.pm_.c:327
+#: ../my_gtk.pm_.c:410
+msgid "Ok"
+msgstr "Ok"
+
 #: ../install_steps_interactive.pm_.c:35
 msgid "An error occurred"
 msgstr "En feil oppsto"
@@ -1189,108 +1222,117 @@ msgstr "Velg de partisjonene du ønsker å formatere"
 msgid "Formatting partition %s"
 msgstr "Formaterer partisjon %s"
 
-#: ../install_steps_interactive.pm_.c:132
+#: ../install_steps_interactive.pm_.c:123
+msgid "Searching for available packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:137
 msgid "Keep the current IP configuration"
 msgstr "Behold nåværende IP-konfigurasjon"
 
-#: ../install_steps_interactive.pm_.c:133
+#: ../install_steps_interactive.pm_.c:138
 msgid "Reconfigure network now"
 msgstr "Rekonfigurer nettverket nå"
 
-#: ../install_steps_interactive.pm_.c:134
+#: ../install_steps_interactive.pm_.c:139
 msgid "Don't set up networking"
 msgstr "Ikke sett opp nettverk"
 
-#: ../install_steps_interactive.pm_.c:136
-#: ../install_steps_interactive.pm_.c:142
+#: ../install_steps_interactive.pm_.c:141
+#: ../install_steps_interactive.pm_.c:147
 msgid "Network Configuration"
 msgstr "Nettverks-konfigurasjon"
 
-#: ../install_steps_interactive.pm_.c:137
+#: ../install_steps_interactive.pm_.c:142
 msgid "LAN networking has already been configured. Do you want to:"
 msgstr "LAN nettverket har allerede blitt konfigurert. Vil du:"
 
-#: ../install_steps_interactive.pm_.c:143
+#: ../install_steps_interactive.pm_.c:148
 msgid ""
 "Do you want to configure LAN (not dialup) networking for your installed "
 "system?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:240
+#: ../install_steps_interactive.pm_.c:253
 msgid "Standard Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:241
+#: ../install_steps_interactive.pm_.c:254
 msgid ""
 "Every print queue (which print jobs are directed to) needs a \n"
 "name (often lp) and a spool directory associated with it. What \n"
 "name and directory should be used for this queue?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:244
+#: ../install_steps_interactive.pm_.c:257
 msgid "Name of queue:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:244
+#: ../install_steps_interactive.pm_.c:257
 msgid "Spool directory:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:255
+#: ../install_steps_interactive.pm_.c:268
 msgid "Select Printer Connection"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:256
+#: ../install_steps_interactive.pm_.c:269
 msgid "How is the printer connected?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:264
+#: ../install_steps_interactive.pm_.c:277
 msgid "Detecting devices..."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:264
+#: ../install_steps_interactive.pm_.c:277
 msgid "Test ports"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:278
+#: ../install_steps_interactive.pm_.c:290
+#, c-format
+msgid "I have detected a %s on "
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:297
 msgid "Local Printer Device"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:279
+#: ../install_steps_interactive.pm_.c:298
 msgid ""
 "What device is your printer connected to  \n"
 "(note that /dev/lp0 is equivalent to LPT1:)?\n"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:280
+#: ../install_steps_interactive.pm_.c:299
 #, fuzzy
 msgid "Printer Device:"
 msgstr "Enhet: "
 
-#: ../install_steps_interactive.pm_.c:286
+#: ../install_steps_interactive.pm_.c:305
 msgid "Remote lpd Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:287
+#: ../install_steps_interactive.pm_.c:306
 msgid ""
 "To use a remote lpd print queue, you need to supply \n"
 "the hostname of the printer server and the queue name \n"
 "on that server which jobs should be placed in."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:290
+#: ../install_steps_interactive.pm_.c:309
 #, fuzzy
 msgid "Remote hostname:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:290
+#: ../install_steps_interactive.pm_.c:309
 msgid "Remote queue:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:296
+#: ../install_steps_interactive.pm_.c:315
 msgid "SMB/Windows 95/NT Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:297
+#: ../install_steps_interactive.pm_.c:316
 msgid ""
 "To print to a SMB printer, you need to provide the \n"
 "SMB host name (this is not always the same as the machines \n"
@@ -1299,46 +1341,46 @@ msgid ""
 "applicable user name, password, and workgroup information."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:302
+#: ../install_steps_interactive.pm_.c:321
 #, fuzzy
 msgid "SMB server IP:"
 msgstr "tjener"
 
-#: ../install_steps_interactive.pm_.c:302
+#: ../install_steps_interactive.pm_.c:321
 #, fuzzy
 msgid "SMB server host:"
 msgstr "tjener"
 
-#: ../install_steps_interactive.pm_.c:303
-#: ../install_steps_interactive.pm_.c:325
+#: ../install_steps_interactive.pm_.c:322
+#: ../install_steps_interactive.pm_.c:344
 #, fuzzy
 msgid "Password:"
 msgstr "Passord"
 
-#: ../install_steps_interactive.pm_.c:303
+#: ../install_steps_interactive.pm_.c:322
 #, fuzzy
 msgid "Share name:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:303
-#: ../install_steps_interactive.pm_.c:325
+#: ../install_steps_interactive.pm_.c:322
+#: ../install_steps_interactive.pm_.c:344
 #, fuzzy
 msgid "User name:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:304
+#: ../install_steps_interactive.pm_.c:323
 msgid "Workgroup:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:311
+#: ../install_steps_interactive.pm_.c:330
 msgid "IP address should be in format 1.2.3.4"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:319
+#: ../install_steps_interactive.pm_.c:338
 msgid "NetWare Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:320
+#: ../install_steps_interactive.pm_.c:339
 msgid ""
 "To print to a NetWare printer, you need to provide the \n"
 "NetWare print server name (this is not always the same as the machines \n"
@@ -1346,111 +1388,111 @@ msgid ""
 "wish to access and any applicable user name and password."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:324
+#: ../install_steps_interactive.pm_.c:343
 msgid "Print Queue Name:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:324
+#: ../install_steps_interactive.pm_.c:343
 msgid "Printer Server:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:346
+#: ../install_steps_interactive.pm_.c:354
 #, fuzzy
 msgid "Configure Printer"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:347
+#: ../install_steps_interactive.pm_.c:355
 #, fuzzy
 msgid "What type of printer do you have?"
 msgstr "Hva slags brukertype vil du ha?"
 
-#: ../install_steps_interactive.pm_.c:358
-#: ../install_steps_interactive.pm_.c:359
+#: ../install_steps_interactive.pm_.c:366
+#: ../install_steps_interactive.pm_.c:367
 msgid "Paper Size"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:378
+#: ../install_steps_interactive.pm_.c:386
 msgid "CRLF"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:379
+#: ../install_steps_interactive.pm_.c:387
 msgid "Fix stair-stepping of text?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:395
+#: ../install_steps_interactive.pm_.c:403
 #, fuzzy
 msgid "Configure Uniprint Driver"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:396
+#: ../install_steps_interactive.pm_.c:404
 msgid "You may now configure the uniprint options for this printer."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:404
+#: ../install_steps_interactive.pm_.c:412
 #, fuzzy
 msgid "Configure Color Depth"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:405
+#: ../install_steps_interactive.pm_.c:413
 msgid "You may now configure the color options for this printer."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:428
-#: ../install_steps_interactive.pm_.c:453
+#: ../install_steps_interactive.pm_.c:436
+#: ../install_steps_interactive.pm_.c:461
 msgid "Password"
 msgstr "Passord"
 
-#: ../install_steps_interactive.pm_.c:428
-#: ../install_steps_interactive.pm_.c:453
+#: ../install_steps_interactive.pm_.c:436
+#: ../install_steps_interactive.pm_.c:461
 msgid "Password (again)"
 msgstr "Passord (igjen)"
 
-#: ../install_steps_interactive.pm_.c:432
-#: ../install_steps_interactive.pm_.c:464
+#: ../install_steps_interactive.pm_.c:440
+#: ../install_steps_interactive.pm_.c:472
 msgid "Please try again"
 msgstr "Vennligst prøv igjen"
 
-#: ../install_steps_interactive.pm_.c:432
-#: ../install_steps_interactive.pm_.c:464
+#: ../install_steps_interactive.pm_.c:440
+#: ../install_steps_interactive.pm_.c:472
 msgid "You must enter the same password"
 msgstr "Du må skrive inn det samme passordet"
 
-#: ../install_steps_interactive.pm_.c:433
+#: ../install_steps_interactive.pm_.c:441
 msgid "This password is too simple"
 msgstr "Dette passordet er for enkelt"
 
-#: ../install_steps_interactive.pm_.c:451
+#: ../install_steps_interactive.pm_.c:459
 msgid "Add user"
 msgstr "Legg til bruker"
 
-#: ../install_steps_interactive.pm_.c:452
+#: ../install_steps_interactive.pm_.c:460
 #, fuzzy
 msgid "Enter a user"
 msgstr "Legg til en bruker"
 
-#: ../install_steps_interactive.pm_.c:453
+#: ../install_steps_interactive.pm_.c:461
 msgid "Real name"
 msgstr "Virkelig navn"
 
-#: ../install_steps_interactive.pm_.c:453
+#: ../install_steps_interactive.pm_.c:461
 msgid "Shell"
 msgstr "Skall"
 
-#: ../install_steps_interactive.pm_.c:453
+#: ../install_steps_interactive.pm_.c:461
 msgid "User name"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:466
+#: ../install_steps_interactive.pm_.c:474
 msgid "Please give a user name"
 msgstr "Vennligst oppgi et brukernavn"
 
-#: ../install_steps_interactive.pm_.c:467
+#: ../install_steps_interactive.pm_.c:475
 #, fuzzy
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "Brukernavnet kan kun inneholde bokstaver, tall, `-' og `_'"
 
-#: ../install_steps_interactive.pm_.c:486
+#: ../install_steps_interactive.pm_.c:494
 msgid ""
 "A custom bootdisk provides a way of booting into your Linux system without\n"
 "depending on the normal bootloader. This is useful if you don't want to "
@@ -1464,44 +1506,44 @@ msgid ""
 "failures. Would you like to create a bootdisk for your system?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:494
+#: ../install_steps_interactive.pm_.c:502
 msgid "Sorry, no floppy drive available"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:497
+#: ../install_steps_interactive.pm_.c:505
 #, fuzzy
 msgid "Choose the floppy drive you want to use to make the bootdisk"
 msgstr "Velg de partisjonene du ønsker å formatere"
 
-#: ../install_steps_interactive.pm_.c:502
+#: ../install_steps_interactive.pm_.c:510
 #, c-format
 msgid "Insert a floppy in drive %s"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:503
+#: ../install_steps_interactive.pm_.c:511
 #, fuzzy
 msgid "Creating bootdisk"
 msgstr "Opprett oppstartdiskett"
 
-#: ../install_steps_interactive.pm_.c:510
+#: ../install_steps_interactive.pm_.c:518
 msgid "First sector of boot partition"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:510
+#: ../install_steps_interactive.pm_.c:518
 msgid "First sector of drive"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:513
+#: ../install_steps_interactive.pm_.c:521
 #, fuzzy
 msgid "Lilo Installation"
 msgstr "Installerer"
 
-#: ../install_steps_interactive.pm_.c:514
+#: ../install_steps_interactive.pm_.c:522
 #, fuzzy
 msgid "Where do you want to install the bootloader?"
 msgstr "Hvor vil du montere %s enheten?"
 
-#: ../install_steps_interactive.pm_.c:525
+#: ../install_steps_interactive.pm_.c:549
 msgid ""
 "Congratulations, installation is complete.\n"
 "Remove the boot media and press return to reboot.\n"
@@ -1512,58 +1554,58 @@ msgid ""
 "install chapter of the Official Linux Mandrake User's Guide."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:542
+#: ../install_steps_interactive.pm_.c:566
 #, fuzzy, c-format
 msgid "What %s card have you?"
 msgstr "Hva slags scsi-kort har du?"
 
-#: ../install_steps_interactive.pm_.c:554
+#: ../install_steps_interactive.pm_.c:578
 msgid "Autoprobe"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:554
+#: ../install_steps_interactive.pm_.c:578
 msgid "Specify options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:567
+#: ../install_steps_interactive.pm_.c:591
 msgid "Module options:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:587
+#: ../install_steps_interactive.pm_.c:611
 #, fuzzy, c-format
 msgid "Installing driver for %s card %s"
 msgstr "Installerer driver for scsi-kort %s"
 
-#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:612
 #, c-format
 msgid "(module %s)"
 msgstr "(modul %s)"
 
-#: ../install_steps_interactive.pm_.c:600
+#: ../install_steps_interactive.pm_.c:624
 #, fuzzy, c-format
 msgid "Found %s %s interfaces"
 msgstr " scsi grensesnitt"
 
-#: ../install_steps_interactive.pm_.c:601
+#: ../install_steps_interactive.pm_.c:625
 msgid "Do you have another one?"
 msgstr "Har du enda ett?"
 
-#: ../install_steps_interactive.pm_.c:602
+#: ../install_steps_interactive.pm_.c:626
 #, fuzzy, c-format
 msgid "Do you have an %s interface?"
 msgstr "Har du et scsi grensesnitt"
 
-#: ../install_steps_interactive.pm_.c:604 ../interactive.pm_.c:52
+#: ../install_steps_interactive.pm_.c:628 ../interactive.pm_.c:52
 #: ../my_gtk.pm_.c:326
 msgid "No"
 msgstr "Nei"
 
-#: ../install_steps_interactive.pm_.c:604 ../interactive.pm_.c:52
+#: ../install_steps_interactive.pm_.c:628 ../interactive.pm_.c:52
 #: ../my_gtk.pm_.c:326
 msgid "Yes"
 msgstr "Ja"
 
-#: ../install_steps_interactive.pm_.c:605
+#: ../install_steps_interactive.pm_.c:629
 msgid "See hardware info"
 msgstr ""
 
@@ -1572,16 +1614,11 @@ msgstr ""
 msgid "Starting step `%s'\n"
 msgstr "Starter steg `%s'\n"
 
-#: ../interactive.pm_.c:47 ../interactive.pm_.c:57 ../my_gtk.pm_.c:182
-#: ../my_gtk.pm_.c:327 ../my_gtk.pm_.c:410
-msgid "Ok"
-msgstr "Ok"
-
 #: ../interactive.pm_.c:57 ../my_gtk.pm_.c:183 ../my_gtk.pm_.c:327
 msgid "Cancel"
 msgstr "Avbryt"
 
-#: ../interactive.pm_.c:146
+#: ../interactive.pm_.c:147
 msgid "Please wait"
 msgstr "Vennligst vent"
 
@@ -1736,25 +1773,40 @@ msgstr ""
 msgid "Is it ok?"
 msgstr "Er det ok?"
 
-#: ../partition_table.pm_.c:459
+#: ../partition_table.pm_.c:458
 #, c-format
 msgid "Error reading file %s"
 msgstr "Feil ved lesing av fil %s"
 
-#: ../partition_table.pm_.c:466
+#: ../partition_table.pm_.c:465
 #, c-format
 msgid "Restoring from file %s failed: %s"
 msgstr "Gjenoppretting fra fil %s mislykket: %s"
 
-#: ../partition_table.pm_.c:468
+#: ../partition_table.pm_.c:467
 msgid "Bad backup file"
 msgstr "Dårlig backup-fil"
 
-#: ../partition_table.pm_.c:488
+#: ../partition_table.pm_.c:487
 #, c-format
 msgid "Error writing to file %s"
 msgstr "Feil ved skriving til fil %s"
 
+#, fuzzy
+#~ msgid ""
+#~ "Choose \"Installation\" if there are no previous versions of Linux\n"
+#~ "installed, or if you wish use to multiple distributions or versions.\n"
+#~ "Choose \"Update\" if you wish to update a previous version of Mandrake\n"
+#~ "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
+#~ msgstr ""
+#~ "Velg \"Installasjon\" hvis du aldri har installert Linux-systemet på denne "
+#~ "maskinen eller du ønsker\n"
+#~ "å installere flere av dem på denne maskinen.\n"
+#~ "\n"
+#~ "Velg \"Oppdater\" hvis du ønsker å oppdatere et Linux system Mandrake 5.1 "
+#~ "(Venice), 5.2 (Leeloo), 5.3 (Festen) eller\n"
+#~ " 6.0 (Venus)."
+
 #~ msgid ""
 #~ "It is now time to configure the graphic server. First of all, choose your "
 #~ "monitor. You have then\n"