auto-generates help.pm from xml doc done by doc team

3 files changed, 526 insertions, 972 deletions

diff --git a/perl-install/help.pm b/perl-install/help.pm
index 243c2dfe3..e3dbf1395 100644
--- a/perl-install/help.pm
+++ b/perl-install/help.pm
@@ -1,1097 +1,521 @@
-package help; # $Id$
-
+package help;
 use common;
-
 %steps = (
 empty => '',
 
-selectLanguage =>
- __("Please choose your preferred language for installation and system usage."),
-
-license =>
- __("You need to accept the terms of the above license to continue installation.
-
+acceptLicense => 
+__("Before going further, you should read carefully the terms of the license. It
+covers the whole Mandrake Linux distribution, and if you do not agree with all
+the terms in it, click on the Refuse button. That'll immediately terminate the
+installation. To follow on with the installation, click the Accept button."),
+
+addUser => 
+__("GNU/Linux is a multiuser system, and this means that each user can have his own
+preferences, his own files and so on. You can read the User Guide to learn more.
+But unlike Root, which is the administrator, the users which you will add here
+will not be entitled to change anything except their own files and their own
+configuration. You will have to create at least one regular user for yourself.
+That account is where you should log in for routine use. Although it is very
+practical to log in as Root everyday, it may also be very dangerous! The
+slightest mistake could mean that your system would not work any more. If you
+make a serious mistake as a regular user, you may only lose some information,
+but not the entire system.
+
+First you have to enter your real name. This is not mandatory, of course as you
+can actually enter whatever you want. drakX will then take the first word you
+have entered in the box and will bring it over to the User name. This is the
+name that this particular user will use to log into the system. You can change
+it. You then have to enter a password here. A non-privileged (regular) user's
+password is not as crucial as that of Root from a security point of view, but
+that is no reason to neglect it after all, they are your files at risk.
+
+If you click on Accept user, you can then add as many as you want. Add a user
+for each of your friends: your father or your sister, for example. When you have
+added all the users you want, select Done.
+
+Clicking the Advanced button allows you to change the default Shell for that
+user (bash by default)."),
 
-Please click on \"Accept\" if you agree with its terms.
+choosePackages => 
+__("It is now time to specify which programs you wish to install on your system.
+There are thousands of packages available for Mandrake Linux, and you are not
+supposed to know them all by heart.
 
+If you are performing a standard installation from CDROM you will first be asked
+to specify the CDs you currently have. Check the boxes corresponding to the CDs
+you've got around and click OK.
 
-Please click on \"Refuse\" if you disagree with its terms. Installation will end without modifying your current
-configuration."),
+Packages are sorted in groups corresponding to a particular use of your machine.
+The groups themselves are sorted in four sections:
 
-selectKeyboard =>
- __("Choose the layout corresponding to your keyboard from the list above"),
+ * Workstation: If your machine will be used as a workstation, select one or more
+of the corresponding groups.
 
-selectLangs => 
- __("If you wish other languages (than the one you choose at
-beginning of installation) will be available after installation, please chose
-them in list above. If you want select all, you just need to select \"All\"."),
+ * Graphical Environment: Select here your preferred graphical environment.
+Select one at least if you want to have a graphical workstation!
 
-selectInstallClass =>
- __("Please choose \"Install\" if there are no previous version of Mandrake Linux
-installed or if you wish to use several operating systems.
+ * Development: if the machine will be used for programming choose the desired
+group(s).
 
+ * Server: Finally, if the machine is intended to be a server, you are able here
+to select the most common services that you wish to see installed on the
+machine.
 
-Please choose \"Update\" if you wish to update an already installed version of Mandrake Linux.
+Moving the mouse cursor over a group name will display a short explanatory text
+about this group.
 
+Clicking the Advanced button, will allow you to select the Individual package
+selection option. This is useful if you know well the packages offered or if you
+want to have total control on what will be installed.
 
-Depend of your knowledge in GNU/Linux, you can choose one of the following levels to install or update your
-Mandrake Linux operating system:
+If you have started the installation in ``Update'' mode, you can unselect all
+groups to avoid installing any new package and just repair or update the
+existing system.
 
-	* Recommended: if you have never installed a GNU/Linux operating system choose this. Installation will be
-	  be very easy and you will be asked only on few questions.
+Finally, depending whether you choose to select individual packages or not, you
+will be presented a tree containing all packages classified by groups and
+subgroups. While browsing the tree, you can select entire groups, subgroups, or
+simply packages.
 
+Whenever you select a package on the tree, a description appears on the right.
+When you have finished with your selections, click the Install button. The
+installation itself then begins. If you have chosen to install a lot of
+packages, you can go and have a cup of coffee.
 
-	* Customized: if you are familiar enough with GNU/Linux, you may choose the primary usage (workstation, server,
-	  development) of your system. You will need to answer to more questions than in \"Recommended\" installation
-	  class, so you need to know how GNU/Linux works to choose this installation class.
+!! If it happens that a server package has been selected either intentionnally
+or because it was part of a whole group; you will be asked to confirm that you
+really want those servers to be installed. Under Mandrake Linux, installed
+servers are started by default at boot time. Even if they are safe at the time
+the distribution was shipped, it may happen that security holes be discovered
+afterwards. In particular if you don't know what all that is about, simply click
+No here. Clickin Yes will install the listed services and they will be available
+by default. !!
 
+The Automatic dependencies option simply disable the warning dialog which
+appears whenever the installer automatically selects a package because it is a
+dependency of another package you just selected."),
 
-	* Expert: if you have a good knowledge in GNU/Linux, you can choose this installation class. As in \"Customized\"
-	  installation class, you will be able to choose the primary usage (workstation, server, development). Be very
-	  careful before choose this installation class. You will be able to perform a higly customized installation.
-	  Answer to some questions can be very difficult if you haven't a good knowledge in GNU/Linux. So, don't choose
-	  this installation class unless you know what you are doing."),
+configureNetwork => 
+__("If you wish to connect your computer to the Internet or to a local network
+please choose the correct option. Please turn on your device before choosing the
+correct option to let DrakX detect it automaticall.
 
-selectInstallClassCorpo =>
- __("Select:
+Mandrake Linux offers you to configure your Internet connection at install time.
+Available connections are: traditional modem, ISDN modem, ADSL connection, cable
+modem, and finally a simple LAN connection (Ethernet).
 
-  - Customized: If you are familiar enough with GNU/Linux, you may then choose
-    the primary usage for your machine. See below for details.
+We won't enter here into the details of each configuration. Simply make sure
+that you have all the parameters from your Internet Service Provider or system
+administrator.
 
+You can consult the chapter of the manual about Internet connection for details
+about the configuration, or simply wait until your system is installed and use
+the program described there to configure your connection.
 
-  - Expert: This supposes that you are fluent with GNU/Linux and want to
-    perform a highly customized installation. As for a \"Customized\"
-    installation class, you will be able to select the usage for your system.
-    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE DOING!"),
+If you do not have any connection to the Internet or a local network, choose
+\"Disable networking\".
 
-selectInstallClass2 =>
- __("You must now define your machine usage. Choices are:
+If you wish to configure the network later after installation or if you have
+finished to configure your network connection, choose \"Done\"."),
 
-	* Workstation: this the ideal choice if you intend to use your machine primarily for everyday use, at office or
-	  at home.
+configureServices => 
+__("You may now choose which services you want to start at boot time.
 
+Here are presented all the services available with the current installation.
+Review them carefully and uncheck those that are not always needed at boot time.
 
-	* Development: if you intend to use your machine primarily for software development, it is the good choice. You
-	  will then have a complete collection of software installed in order to compile, debug and format source code,
-	  or create software packages.
+You can get a short explanatory text on a service by placing the mouse cursor on
+the service name. If you are not sure whether a service is useful or not, it is
+safer to leave the default behavior though.
 
+Be very careful in this step if you intend to use your machine as a server: you
+will probably want not to start any services that you don't need. Please
+remember that several services can be dangerous if they are enable on a server.
+In general, select only the services that you really need."),
 
-	* Server: if you intend to use this machine as a server, it is the good choice. Either a file server (NFS or
-	  SMB), a print server (Unix style or Microsoft Windows style), an authentication server (NIS), a database
-	  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) to be installed."),
+configureX => 
+__("X (for X Window System) is the heart of the GNU/Linux graphical interface on
+which all the graphics environments (KDE, Gnome, AfterStep, WindowMaker...)
+bundled with Mandrake Linux rely. In this section, drakX will try to configure X
+automatically.
 
-setupSCSI => 
- __("DrakX will attempt to look for PCI SCSI adapter(s). If DrakX
-finds an SCSI adapter and knows which driver to use, it will be automatically
-installed.
+It is extremely rare for it to fail. The only reason for it doing so is if the
+hardware is very old (or very new). If it succeeds, it will start X
+automatically with the best resolution possible depending on the size of the
+monitor. A window will then appear and ask you if you can see it.
 
+If you are doing an Expert install, you will enter the X configuration wizard.
+See the corresponding section of the manual for more information about this
+wizard.
 
-If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that
-DrakX doesn't recognize, you will be asked if a SCSI adapter is present in your
-system. If there is no adapter present, you can click on \"No\". If you click on
-\"Yes\", a list of drivers will be presented from which you can select your
-specific adapter.
+If you can see the message and answer Yes, then drakX will proceed to next step.
+If you cannot see the message, it simply means that the configuration was wrong
+and the test will automatically end after 10 seconds, restoring the screen.
 
+It can happen that the first try isn't the best display (screen is too small,
+shifted left or right...). This is why, even if X starts up correctly, drakX
+will then ask you if the configuration suits you and will propose to change it
+by displaying a list of valid modes it could find, asking you to select one.
 
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for the
-options. This usually works well.
+As a last resort, if you still cannot get X to work, choose Change graphics
+card, select Unlisted card, and when prompted on which server you want, choose
+FBDev. This is a failsafe option which works with any modern graphics card. Then
+choose Test again to be sure.
 
+Finally, you will be asked on whether you want to see the graphical interface at
+boot. Note that you will be asked this even if you chose not to test the
+configuration. Obviously, you want to answer No if your machine will act as a
+server or if you were not successful in getting the display configured."),
 
-If not, you will need to provide options to the driver. Please review the User
-Guide (chapter 3, section \"Collective informations on your hardware\") for hints
-on retrieving this information from hardware documentation, from the
-manufacturer's Web site (if you have Internet access) or from Microsoft Windows
-(if you have it on your system)."),
+createBootdisk => 
+__("The Mandrake Linux CDROM has a built-in rescue mode. You can access it by
+booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at the
+prompt. But in case your computer cannot boot from the CDROM, you should come
+back to this step for help in at least two situations:
+
+ * when installing the boot loader, drakX will rewrite the boot sector (MBR) of
+your main disk (unless you are using another boot manager) so that you can start
+up with either Windows or GNU/Linux (assuming you have Windows in your system).
+If you need to reinstall Windows, the Microsoft install process will rewrite the
+boot sector, and then you will not be able to start GNU/Linux!
+
+ * if a problem arises and you cannot start up GNU/Linux from the hard disk, this
+floppy disk will be the only means of starting up GNU/Linux. It contains a fair
+number of system tools for restoring a system which has crashed due to a power
+failure, an unfortunate typing error, a typo in a password, or any other reason.
+
+When you click on this step, you will be asked to enter a disk inside the drive.
+The floppy disk that you will insert must be empty or must only contain data
+which you do not need. You will not have to format it; drakX will rewrite the
+whole disk."),
 
 doPartitionDisks => 
- __("At this point, you need to choose where to install your
-Mandrake Linux operating system on your hard drive. If it is empty or if an
-existing operating system uses all the space available on it, you need to
-partition it. Basically, partitioning a hard drive consists of logically
-dividing it to create space to install your new Mandrake Linux system.
-
+__("At this point, you need to choose where to install your Mandrake Linux operating
+system on your hard drive. If it is empty or if an existing operating system
+uses all the space available on it, you need to partition it. Basically,
+partitioning a hard drive consists of logically dividing it to create space to
+install your new Mandrake Linux system.
 
 Because the effects of the partitioning process are usually irreversible,
 partitioning can be intimidating and stressful if you are an inexperienced user.
-This wizard simplifies this process. Before beginning, please consult the manual
-and take your time.
-
-
-You need at least two partitions. One is for the operating system itself and the
-other is for the virtual memory (also called Swap).
+Hopefully, there is a wizard which simplifies this process. Before beginning,
+please consult the manual and take your time.
 
+If you are running the install in Expert mode, you will enter the Mandrake Linux
+partitioning tool: DiskDrake;. It allows you to fine-tune your partitions. See
+the chapter DiskDrake of the manual; the usage is the same. You can use from the
+installation interface the wizards as described here by clicking the button
+Wizard from the interface.
 
 If partitions have been already defined (from a previous installation or from
 another partitioning tool), you just need choose those to use to install your
 Linux system.
 
+If partitions haven't been already defined, you need to create them. To do that,
+use the wizard available above. Depending of your hard drive configuration,
+several options are available:
 
-If partitions haven't been already defined, you need to create them. 
-To do that, use the wizard available above. Depending of your hard drive
-configuration, several solutions can be available:
-
-	* Use existing partition: the wizard has detected one or more existing Linux partitions on your hard drive. If
-	  you want to keep them, choose this option. 
-
-
-	* Erase entire disk: if you want delete all data and all partitions present on your hard drive and replace them by
-	  your new Mandrake Linux system, you can choose this option. Be careful with this solution, you will not be
-	  able to revert your choice after confirmation.
-
-
-	* Use the free space on the Windows partition: if Microsoft Windows is installed on your hard drive and takes
-	  all space available on it, you have to create free space for Linux data. To do that you can delete your
-	  Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or resize your
-	  Microsoft Windows partition. Resizing can be performed without loss of any data. This solution is
-	  recommended if you want use both Mandrake Linux and Microsoft Windows on same computer.
-
-
-	  Before choosing this solution, please understand that the size of your Microsoft
-	  Windows partition will be smaller than at present time. It means that you will have less free space under
-	  Microsoft Windows to store your data or install new software.
-
-
-	* Expert mode: if you want to partition manually your hard drive, you can choose this option. Be careful before
-	  choosing this solution. It is powerful but it is very dangerous. You can lose all your data very easily. So,
-	  don't choose this solution unless you know what you are doing."),
-
-partition_with_diskdrake => 
- __("At this point, you need to choose what
-partition(s) to use to install your new Mandrake Linux system. If partitions
-have been already defined (from a previous installation of GNU/Linux or from
-another partitioning tool), you can use existing partitions. In other cases,
-hard drive partitions must be defined.
-
-
-To create partitions, you must first select a hard drive. You can select the
-disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb\" for
-the second or \"sda\" for the first SCSI drive and so on.
-
-
-To partition the selected hard drive, you can use these options:
-
-   * Clear all: this option deletes all partitions available on the selected hard drive.
-
-
-   * Auto allocate: this option allows you to automatically create Ext2 and swap partitions in free space of your
-     hard drive.
-
-
-   * Rescue partition table: if your partition table is damaged, you can try to recover it using this option. Please
-     be careful and remember that it can fail.
-
-
-   * Undo: you can use this option to cancel your changes.
-
-
-   * Reload: you can use this option if you wish to undo all changes and load your initial partitions table
-
-
-   * Wizard: If you wish to use a wizard to partition your hard drive, you can use this option. It is recommended if
-     you do not have a good knowledge in partitioning.
-
-
-   * Restore from floppy: if you have saved your partition table on a floppy during a previous installation, you can
-     recover it using this option.
-
-
-   * Save on floppy: if you wish to save your partition table on a floppy to be able to recover it, you can use this
-     option. It is strongly recommended to use this option
-
-
-   * Done: when you have finished partitioning your hard drive, use this option to save your changes.
-
-
-For information, you can reach any option using the keyboard: navigate trough the partitions using Tab and Up/Down arrows.
-
-
-When a partition is selected, you can use:
-
-           * Ctrl-c to create a new partition (when a empty partition is selected)
-
-           * Ctrl-d to delete a partition
+ * Use free space: it will simply lead to an automatic partitioning of your blank
+drive(s); you won't need to worry any more about it.
 
-           * Ctrl-m to set the mount point
-           
+ * Use existing partition: the wizard has detected one or more existing Linux
+partitions on your hard drive. If you want to keep them, choose this option.
 
-           
-If you are installing on a PPC Machine, you will want to create a small HFS 'bootstrap' partition of at least 1MB for use
-by the yaboot bootloader. If you opt to make the partition a bit larger, say 50MB, you may find it a useful place to store 
-a spare kernel and ramdisk image for emergency boot situations."),
+ * Erase entire disk: if you want delete all data and all partitions present on
+your hard drive and replace them by your new Mandrake Linux system, you can
+choose this option. Be careful with this solution, you will not be able to
+revert your choice after confirmation.
 
-ask_mntpoint_s => 
- __("Above are listed the existing Linux partitions detected on
-your hard drive. You can keep choices make by the wizard, they are good for a
-common usage. If you change these choices, you must at least define a root
-partition (\"/\"). Don't choose a too little partition or you will not be able
-to install enough software. If you want store your data on a separate partition,
-you need also to choose a \"/home\" (only possible if you have more than one
-Linux partition available).
+ * Use the free space on the Windows partition: if Microsoft Windows is installed
+on your hard drive and takes all space available on it, you have to create free
+space for Linux data. To do that you can delete your Microsoft Windows partition
+and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or resize your
+Microsoft Windows partition. Resizing can be performed without loss of any data.
+This solution is recommended if you want use both Mandrake Linux and Microsoft
+Windows on same computer.
 
+   Before choosing this solution, please understand that the size of your Microsoft
+Windows partition will be smaller than at present time. It means that you will
+have less free space under Microsoft Windows to store your data or install new
+software.
 
-For information, each partition is listed as follows: \"Name\", \"Capacity\".
+ * Remove Windows: it will simply erase everything on the drive and begin fresh,
+partitioning from scratch. All data on your disk will be lost.
 
+   !! If you choose this option, All data on your disk will be lost. !!
 
-\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
+ * Expert mode: if you want to partition manually your hard drive, you can choose
+this option. Be careful before choosing this solution. It is powerful but it is
+very dangerous. You can lose all your data very easily. So, don't choose this
+solution unless you know what you are doing."),
 
+exitInstall => 
+__("There you are. Installation is now complete and your GNU/Linux system is ready
+to use. Just click OK to reboot the system. You can start GNU/Linux or Windows,
+whichever you prefer (if you are dual-booting), as soon as the computer has
+booted up again.
 
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and \"sd\"
-if it is an SCSI hard drive.
+The Advanced button shows two more buttons to:
 
+ * Generate auto install floppy: to create an install floppy disk that will
+automatically perform a whole installation without the help of an operator,
+similar to the installation you just configured.
 
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE hard drives:
+   Note that two different options are available after clicking the button:
 
-   * \"a\" means \"master hard drive on the primary IDE controller\",
+    * Replay: This is a partially automated install as the partitioning step (and
+only this one) remains interactive.
 
-   * \"b\" means \"slave hard drive on the primary IDE controller\",
+    * Automated: Fully automated install: the hard disk is completely rewritten, all
+data is lost.
 
-   * \"c\" means \"master hard drive on the secondary IDE controller\",
+   This feature is very handy when installing a great number of similar machines.
+See the Auto install section at our WebSite.
 
-   * \"d\" means \"slave hard drive on the secondary IDE controller\".
+ * Save packages selection(*): saves the packages selection as made previously.
+Then when doing another install, insert the floppy inside the driver and run the
+install going to the help screen F1, and issuing >>linux defcfg=\"floppy\"<<.
 
-
-With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means \"secondary hard drive\", etc..."),
-
-takeOverHdChoose => 
- __("Choose the hard drive you want to erase to install your
-new Mandrake Linux partition. Be careful, all data present on it will be lost
-and will not be recoverable."),
-
-takeOverHdConfirm => 
- __("Click on \"OK\" if you want to delete all data and
-partitions present on this hard drive. Be careful, after clicking on \"OK\", you
-will not be able to recover any data and partitions present on this hard drive,
-including any Windows data.
-
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-
-resizeFATChoose => 
- __("More than one Microsoft Windows partition have been
-detected on your hard drive. Please choose the one you want resize to install
-your new Mandrake Linux operating system.
-
-
-For information, each partition is listed as follow; \"Linux name\", \"Windows
-name\" \"Capacity\".
-
-\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd\"
-if it is an SCSI hard drive.
-
-
-\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With IDE hard drives:
-
-   * \"a\" means \"master hard drive on the primary IDE controller\",
-
-   * \"b\" means \"slave hard drive on the primary IDE controller\",
-
-   * \"c\" means \"master hard drive on the secondary IDE controller\",
-
-   * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means \"secondary hard drive\", etc.
-
-
-\"Windows name\" is the letter of your hard drive under Windows (the first disk
-or partition is called \"C:\")."),
-
-resizeFATWait => 
- __("Please be patient. This operation can take several minutes."),
+(*) You need a FAT formatted floppy (To create one under GNU/Linux type
+\"mformat a:\")"),
 
 formatPartitions => 
- __("Any partitions that have been newly defined must be
-formatted for use (formatting meaning creating a filesystem).
-
+__("Any partitions that have been newly defined must be formatted for use
+(formatting meaning creating a filesystem).
 
 At this time, you may wish to reformat some already existing partitions to erase
 the data they contain. If you wish do that, please also select the partitions
 you want to format.
 
-
 Please note that it is not necessary to reformat all pre-existing partitions.
 You must reformat the partitions containing the operating system (such as \"/\",
-\"/usr\" or \"/var\") but do you no have to reformat partitions containing data
+\"/usr\" or \"/var\") but you do not have to reformat partitions containing data
 that you wish to keep (typically /home).
 
+Please be careful selecting partitions, after formatting, all data on the
+selected partitions will be deleted and you will not be able to recover any of
+them.
 
-Please be careful selecting partitions, after formatting, all data will be
-deleted and you will not be able to recover any of them.
-
-
-Click on \"OK\" when you are ready to format partitions.
-
-
-Click on \"Cancel\" if you want to choose other partitions to install your new
-Mandrake Linux operating system."),
-
-choosePackages => 
- __("You may now select the group of packages you wish to
-install or upgrade.
-
-
-DrakX will then check whether you have enough room to install them all. If not,
-it will warn you about it. If you want to go on anyway, it will proceed onto the
-installation of all selected groups but will drop some packages of lesser
-interest. At the bottom of the list you can select the option 
-\"Individual package selection\"; in this case you will have to browse through
-more than 1000 packages..."),
-
-choosePackagesTree => 
- __("You can now choose individually all the packages you
-wish to install.
+Click on OK when you are ready to format partitions.
 
+Click on Cancel if you want to choose other partitions to install your new
+Mandrake Linux operating system.
 
-You can expand or collapse the tree by clicking on options in the left corner of
-the packages window.
-
-
-If you prefer to see packages sorted in alphabetic order, click on the icon
-\"Toggle flat and group sorted\".
-
-
-If you want not to be warned on dependencies, click on \"Automatic
-dependencies\". If you do this, note that unselecting one package may silently
-unselect several other packages which depend on it."),
-
-chooseCD => 
- __("If you have all the CDs in the list above, click Ok. If you have
-none of those CDs, click Cancel. If only some CDs are missing, unselect them,
-then click Ok."),
+Click on Advanced to select partitions on which you want to check for bad
+blocks."),
 
 installPackages => 
- __("Your new Mandrake Linux operating system is currently being
-installed. This operation should take a few minutes (it depends on size you
-choose to install and the speed of your computer).
-
+__("Your new Mandrake Linux operating system is currently being installed. This
+operation should take a few minutes (it depends on size you choose to install
+and the speed of your computer).
 
 Please be patient."),
 
-selectMouse => 
- __( "You can now test your mouse. Use buttons and wheel to verify
-if settings are good. If not, you can click on \"Cancel\" to choose another
-driver.
-
-
-If you are installing on an Apple machine with a 1-button mouse, you will
-be given the opportunity to define some keyboard keys to emulate the 2nd
-and 3rd mouse buttons.  This will allow you to be able to access the full
-functionality of the mouse in both the Linux console and the X Window GUI.
-
-
-If you have an ADB mouse, please select USB, as the Linux kernel will take
-care of mapping your mouse hardware correctly."),
-
-selectSerialPort => 
- __("Please select the correct port. For example, the COM1
-port under MS Windows is named ttyS0 under GNU/Linux."),
-
-configureNetwork => 
- __("If you wish to connect your computer to the Internet or
-to a local network please choose the correct option. Please turn on your device
-before choosing the correct option to let DrakX detect it automatically.
-
-
-If you do not have any connection to the Internet or a local network, choose
-\"Disable networking\".
-
-
-If you wish to configure the network later after installation or if you have
-finished to configure your network connection, choose \"Done\"."),
-
-configureNetworkNoModemFound => 
- __("No modem has been detected. Please select the serial port on which it is plugged.
-
-
-For information, the first serial port (called \"COM1\" under Microsoft
-Windows) is called \"ttyS0\" under Linux."),
-
-configureNetworkDNS => 
- __("You may now enter dialup options. If you don't know
-or are not sure what to enter, the correct informations can be obtained from
-your Internet Service Provider. If you do not enter the DNS (name server)
-information here, this information will be obtained from your Internet Service
-Provider at connection time."),
-
-configureNetworkISDN => 
- __("If your modem is an external modem, please turn on it now to let DrakX detect it automatically."),
-
-configureNetworkADSL => 
- __("Please turn on your modem and choose the correct one."),
-
-configureNetworkADSL2 => 
- __("If you are not sure if informations above are
-correct or if you don't know or are not sure what to enter, the correct
-informations can be obtained from your Internet Service Provider. If you do not
-enter the DNS (name server) information here, this information will be obtained
-from your Internet Service Provider at connection time."),
-
-configureNetworkCable => 
- __("You may now enter your host name if needed. If you
-don't know or are not sure what to enter, the correct informations can be
-obtained from your Internet Service Provider."),
-
-configureNetworkIP => 
- __("You may now configure your network device.
-
-   * IP address: if you don't know or are not sure what to enter, ask your network administrator.
-     You should not enter an IP address if you select the option \"Automatic IP\" below.
-
-   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't know or are not sure what to enter,
-     ask your network administrator.
-
-   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this option. If selected, no value is needed in
-    \"IP address\". If you don't know or are not sure if you need to select this option, ask your network administrator."),
-
-configureNetworkHost => 
- __("You may now enter your host name if needed. If you
-don't know or are not sure what to enter, ask your network administrator."),
-
-configureNetworkHostDHCP => 
- __("You may now enter your host name if needed. If you
-don't know or are not sure what to enter, leave blank."),
-
-configureNetworkISP =>
- __("You may now enter dialup options. If you're not sure what to enter, the
-correct information can be obtained from your ISP."),
-
-configureNetworkProxy =>
- __("If you will use proxies, please configure them now. If you don't know if
-you should use proxies, ask your network administrator or your ISP."),
-
-installCrypto =>
- __("You can install cryptographic package if your internet connection has been
-set up correctly. First choose a mirror where you wish to download packages and
-after that select the packages to install.
-
-
-Note you have to select mirror and cryptographic packages according
-to your legislation."),
-
-configureTimezone =>
- __("You can now select your timezone according to where you live."),
-
-configureTimezoneGMT => 
- __("GNU/Linux manages time in GMT (Greenwich Manage
-Time) and translates it in local time according to the time zone you have
-selected.
-
-
-If you use Microsoft Windows on this computer, choose \"No\"."),
-
-configureServices =>
- __("You may now choose which services you want to start at boot time.
-
-
-When your mouse comes over an item, a small balloon help will popup which
-describes the role of the service.
-
-
-Be very careful in this step if you intend to use your machine as a server: you
-will probably want not to start any services that you don't need. Please
-remember that several services can be dangerous if they are enable on a server.
-In general, select only the services that you really need."),
-
-configurePrinter => 
- __("You can configure a local printer (connected to your computer) or remote
-printer (accessible via a Unix, Netware or Microsoft Windows network)."),
-
-configurePrinterSystem => 
- __("If you wish to be able to print, please choose one printing system between
-CUPS and LPR.
-
+miscellaneous => 
+__("At this point, it is now time to choose the security level desired for that
+machine. As a rule of thumb, the more exposed is the machine, and the more the
+data stored in it is crucial the higher the security level should be. However a
+higher security level is generally obtained at the expenses of easiness of use.
+Refer to the chapter MSEC of the Reference Manual; to get more information about
+the meaning of those levels.
+
+If you don't know what to choose, keep the default option."),
+
+multiCD => 
+__("The Mandrake Linux spreads among several CDROMs. It may be that drakX has
+selected packages on another CDROM than the installation CDROM, and when it
+needs that you put another one into the drive, it will eject the current CDROM
+and ask you for another one."),
+
+selectInstallClass => 
+__("drakX now ask you what installation class you want. Here, you will also choose
+whether you want to perform an installation or an upgrade of an existing
+Mandrake Linux system. Choose what suits your situation. You can perform an
+installation over an existing system, wiping out the old system. You can also do
+an upgrade to repair an existing system.
+
+Please choose \"Install\" if there are no previous version of Mandrake Linux
+installed or if you wish to use several operating systems.
 
-CUPS is a new, powerful and flexible printing system for Unix systems (CUPS
-means \"Common Unix Printing System\"). It is the default printing system in
+Please choose \"Update\" if you wish to update an already installed version of
 Mandrake Linux.
 
+Depend of your knowledge in GNU/Linux, you can choose one of the following
+levels to install or update your Mandrake Linux operating system:
+
+ * Recommended: if you have never installed a GNU/Linux operating system choose
+this. Installation will be be very easy and you will be asked only on few
+questions.
+
+ * Customized: if you are familiar enough with GNU/Linux, you may choose the
+primary usage (workstation, server, development) of your system. You will need
+to answer to more questions than in \"Recommended\" installation class, so you
+need to know how GNU/Linux works to choose this installation class.
+
+ * Expert: if you have a good knowledge in GNU/Linux, you can choose this
+installation class. As in \"Customized\" installation class, you will be able to
+choose the primary usage (workstation, server, development). Be very careful
+before choose this installation class. You will be able to perform a higly
+customized installation. Answer to some questions can be very difficult if you
+haven't a good knowledge in GNU/Linux. So, don't choose this installation class
+unless you know what you are doing."),
+
+selectKeyboard => 
+__("Normally, drakX will have selected the right keyboard for you (depending on the
+language you have chosen) and you won't even see this step. However, you might
+not have a keyboard which corresponds exactly to your language: for example, if
+you are an English speaking Swiss person, you may still want your keyboard to be
+a Swiss keyboard. Or if you speak English but are located in Québec, you may
+find yourself in the same situation. In both cases, you will have to go back to
+this installation step and select an appropriate keyboard from the list.
+
+All you need to do is select your preferred keyboard layout from the list which
+appears in front of you.
+
+If you have a keyboard from another language than the one used by default, click
+on the Advanced button. You will be presented the complete list of supported
+keyboards."),
+
+selectLanguage => 
+__("Please choose your preferred language for installation and system usage.
+
+There is an Advanced button allowing you to select other languages, that will be
+installed in the machine so that you can use them later if you need them. If for
+example you will host people from Spain on your machine, select English as the
+main language in the tree view, and under the advanced section, check the box
+corresponding to Spanish|Spain.
+
+As soon as you have selected the language and confirmed with clicking the OK
+button, you will automatically go on to the next step."),
 
-LPR is the old printing system used in previous Mandrake Linux distributions.
-
-
-If you don't have printer, click on \"None\"."),
-
-configurePrinterConnected => 
- __("GNU/Linux can deal with many types of printer. Each of these types requires
-a different setup.
-
-
-If your printer is physically connected to your computer, select \"Local
-printer\".
-
-
-If you want to access a printer located on a remote Unix machine, select
-\"Remote printer\".
-
-
-If you want to access a printer located on a remote Microsoft Windows machine
-(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."),
-
-configurePrinterLocal => 
- __("Please turn on your printer before continuing to let DrakX detect it.
-
-You have to enter some informations here.
-
-
-   * Name of printer: the print spooler uses \"lp\" as default printer name. So, you must have a printer named \"lp\".
-     If you have only one printer, you can use several names for it. You just need to separate them by a pipe
-     character (a \"|\"). So, if you prefer a more meaningful name, you have to put it first, eg: \"My printer|lp\".
-     The printer having \"lp\" in its name(s) will be the default printer.
-
-
-   * Description: this is optional but can be useful if several printers are connected to your computer or if you allow
-     other computers to access to this printer.
-
-
-   * Location: if you want to put some information on your
-     printer location, put it here (you are free to write what
-     you want, for example \"2nd floor\").
-"),
-
-configurePrinterLPR => 
-__("You need to enter some informations here.
-
-
-   * Name of queue: the print spooler uses \"lp\" as default printer name. So, you need have a printer named \"lp\".
-    If you have only one printer, you can use several names for it. You just need to separate them by a pipe
-    character (a \"|\"). So, if you prefer to have a more meaningful name, you have to put it first, eg: \"My printer|lp\".
-    The printer having \"lp\" in its name(s) will be the default printer.
-
-  
-   * Spool directory: it is in this directory that printing jobs are stored. Keep the default choice
-     if you don't know what to use
-
-
-   * Printer Connection: If your printer is physically connected to your computer, select \"Local printer\".
-     If you want to access a printer located on a remote Unix machine, select \"Remote lpd printer\".
-
-
-     If you want to access a printer located on a remote Microsoft Windows machine (or on Unix machine using SMB
-     protocol), select \"SMB/Windows 95/98/NT\".
-
-
-     If you want to acces a printer located on NetWare network, select \"NetWare\".
-"),
-
-configurePrinterDev => 
- __("Your printer has not been detected. Please enter the name of the device on
-which it is connected.
-
-
-For information, most printers are connected on the first parallel port. This
-one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft Windows."),
-
-configurePrinterType => 
- __("You must now select your printer in the above list."),
-
-configurePrinterOptions => 
-__("Please select the right options according to your printer.
-Please see its documentation if you don't know what choose here.
+selectMouse => 
+__("drakX just skips this test unless you purposely click on the corresponding step
+on the left. By default, drakX sees your mouse as a two-button mouse and
+emulates the third button, and knows whether it's PS/2, serial or USB.
 
+Perhaps this is not what you want. In that case, you just have to select the
+right type for your mouse in the list which appears.
 
-You will be able to test your configuration in next step and you will be able to modify it if it doesn't work as you want."),
+You can now test your mouse. Use buttons and wheel to verify if settings are
+good. If not, you can click on \"Cancel\" to choose another driver."),
 
 setRootPassword => 
- __("You can now enter the root password for your Mandrake Linux system.
-The password must be entered twice to verify that both password entries are identical.
-
-
-Root is the system's administrator and is the only user allowed to modify the
-system configuration. Therefore, choose this password carefully. 
-Unauthorized use of the root account can be extemely dangerous to the integrity
-of the system, its data and other system connected to it.
-
+__("This is the most crucial decision point for the security of your GNU/Linux
+system: you are going to have to enter the Root password. Root is the system
+administrator and is the only one authorized to make updates, add users, change
+the overall system configuration, and so on. In short, root can do everything!
+That is why you have to choose a password which is difficult to guess; drakX
+will tell you if it is too easy. As shown, you can choose not to enter a
+password, but we strongly advise you to enter one, if only for one reason: do
+not think that because you booted GNU/Linux, your other operating systems are
+safe from mistakes. That's not true since Root can overcome all limitations and
+unintentionally erase all data on partitions by carelessly accessing the
+partitions themselves!
 
 The password should be a mixture of alphanumeric characters and at least 8
 characters long. It should never be written down.
 
-
 Do not make the password too long or complicated, though: you must be able to
-remember it without too much effort."),
+remember it without too much effort.
 
-setRootPasswordAuth =>
- __("If your network uses LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your network
-administrator.
+You will have to type the password twice a typing error in the first attempt
+could be a problem if you repeat it since the ``incorrect'' password is now
+required when you connect up to the system.
 
-If your computer is not connected to any administrated network, you may want to
-choose \"Local files\" for authentication."),
+Depending on your local network configuration, you may or may not use NIS. If
+you don't know, ask your system administrator. If you use NIS, check the option
+Use NIS. When you press OK, you will then have to fill in the necessary
+information."),
 
-addUser =>
- __("You may now create one or more \"regular\" user account(s), as
-opposed to the \"privileged\" user account, root. You can create
-one or more account(s) for each person you want to allow to use
-the computer. Note that each user account will have its own
-preferences (graphical environment, program settings, etc.)
-and its own \"home directory\", in which these preferences are
-stored.
+setupBootloader => 
+__("LILO and GRUB are boot loaders for GNU/Linux. This stage is normally totally
+automated. In fact, drakX will analyze the disk boot sector and will act
+accordingly depending on what it finds here:
 
+ * if it finds a Windows boot sector, it will replace it with a GRUB/LILO boot
+sector so that you can start GNU/Linux or Windows;
 
-First of all, create an account for yourself! Even if you will be the only user
-of the machine, you may NOT connect as root for daily use of the system: it's a
-very high security risk. Making the system unusable is very often a typo away.
+ * if it finds a GRUB or LILO boot sector, it will replace it with a new one;
 
+If in doubt, drakX will display a dialog with various options.
 
-Therefore, you should connect to the system using the user account
-you will have created here, and login as root only for administration
-and maintenance purposes."),
+ * Bootloader to use: you get here three choices:
 
-createBootdisk => 
- __("Creating a boot disk is strongly recommended. If you can't
-boot your computer, it's the only way to rescue your system without
-reinstalling it."),
-
-setupBootloaderBeginner =>
- __("You need to indicate where you wish
-to place the information required to boot to GNU/Linux.
-
-
-Unless you know exactly what you are doing, choose \"First sector of
-drive (MBR)\"."),
-
-setupBootloader =>
- __("Unless you know specifically otherwise, the usual choice is \"/dev/hda\"
- (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."),
-
-setupBootloaderAddEntry =>
- __("LILO (the LInux LOader) and Grub are bootloaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful as to choose the correct parameters.
-
-
-You may also want not to give access to these other operating systems to
-anyone, in which case you can delete the corresponding entries. But
-in this case, you will need a boot disk in order to boot them!"),
-
-setupBootloaderGeneral =>
- __("LILO and grub main options are:
-  - Boot device: Sets the name of the device (e.g. a hard disk
-partition) that contains the boot sector. Unless you know specifically
-otherwise, choose \"/dev/hda\".
-
-
-  - Delay before booting default image: Specifies the number in tenths
-of a second the boot loader should wait before booting the first image.
-This is useful on systems that immediately boot from the hard disk after
-enabling the keyboard. The boot loader doesn't wait if \"delay\" is
-omitted or is set to zero.
-
-
-  - Video mode: This specifies the VGA text mode that should be selected
-when booting. The following values are available: 
-
-    * normal: select normal 80x25 text mode.
-
-    * <number>:  use the corresponding text mode.
-
-
-  - Clean \"/tmp\" at each boot: if you want delete all files and directories
-stored in \"/tmp\" when you boot your system, select this option.
-
-
-  - Precise RAM if needed: unfortunately, there is no standard method to ask the
-BIOS about the amount of RAM present in your computer. As consequence, Linux may
-fail to detect your amount of RAM correctly. If this is the case, you can
-specify the correct amount or RAM here. Please note that a difference of 2 or 4
-MB between detected memory and memory present in your system is normal."),
-
-setupYabootGeneral =>
- __("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able
-to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful as to choose the correct parameters.
-
-
-Yaboot main options are:
-
-
-  - Init Message: A simple text message that is displayed before the boot
-prompt.
-
-
-  - Boot Device: Indicate where you want to place the information required to 
-boot to GNU/Linux. Generally, you will have setup a bootstrap partition earlier 
-to hold this information.
-
-
-  - Open Firmware Delay: Unlike LILO, there are two delays available with 
-yaboot.  The first delay is measured in seconds and at this point you can 
-choose between CD, OF boot, MacOS, or Linux.
-
-
-  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  After 
-selecting Linux, you will have this delay in 0.1 seconds before your default
-kernel description is selected.
-
-
-  - Enable CD Boot?: Checking this option will allow you to choose 'C' for CD at
-the first boot prompt.
+    * LILO with graphical menu: if you prefer LILO with its graphical interface.
 
+    * Grub: if you prefer GRUB (text menu).
 
-  - Enable OF Boot?: Checking this option will allow you to choose 'N' for Open
-Firmware at the first boot prompt.
+    * LILO with text menu: if you prefer LILO with its text menu interface.
 
+ * Boot device: In most cases, you will not change the default (/dev/hda), but if
+you prefer, the bootloader can be installed on the second hard drive (/dev/hdb),
+or even on a floppy disk (/dev/fd0).
 
-  - Default OS: You can select which OS will boot by default when the Open Firmware 
-Delay expires."),
- 
-setupYabootAddEntry =>
-__("You can add additional entries for yaboot, either for other operating systems,
-alternate kernels, or for an emergency boot image.
+ * Delay before booting default image: When rebooting the computer, this is the
+delay granted to the user to choose in the boot loader menu, another boot entry
+than the default one.
 
+!! Beware that if you choose not to install a bootloader (by selecting Cancel
+here), you must ensure that you have a way to boot your Mandrake Linux system!
+Also be sure about what you are doing if you change any of the options here. !!
 
-For other OS's - the entry consists only of a label and the root partition.
+Clicking the Advanced button in this dialog will offer many advanced options
+reserved to the expert user.
 
+Mandrake Linux installs its own bootloader, which will let you boot either
+GNU/Linux or any other operating systems which you have on your system.
 
-For Linux, there are a few possible options: 
+If there is another operating system installed on your machine, it'll be
+automatically added to the boot menu. Here you can choose to fine-tune the
+existing options. Double-clicking on an existing entry allows you to change its
+parameters or remove it; Add creates a new entry; and Done goes onto next
+installation step."),
 
+setupSCSI => 
+__("drakX then goes on to detecting all hard disks present on your computer. It will
+also scan for one or more PCI SCSI card(s) on your system, if you have any. If
+such a device is found, drakX will automatically install the right driver.
 
-  - Label: This is simply the name will type at the yaboot prompt to select this 
-boot option.
-
-
-  - Image: This would be the name of the kernel to boot.  Typically vmlinux or
-a variation of vmlinux with an extension.
-
-
-  - Root: The root device or '/' for your Linux installation.
-
-
-  
-  - Append: On Apple hardware, the kernel append option is used quite often to
-assist in initializing video hardware, or to enable keyboard mouse button emulation
-for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The following 
-are some examples:
-
-
-		 video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
-		 video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 
-
-
- 
-  - Initrd: This option can be used either to load initial modules, before the boot 
-device is available, or to load a ramdisk image for an emergency boot situation.
-
-
-  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you should need
-to allocate a large ramdisk, this option can be used.
-
-
-  - Read-write: Normally the 'root' partition is initially brought up read-only, to allow
-a filesystem check before the system becomes 'live'.  You can override this option here.
-
-
-  - NoVideo: Should the Apple video hardware prove to be exceptionally problematic, you can
-select this option to boot in 'novideo' mode, with native framebuffer support.
-
-
-  - Default: Selects this entry as being the default Linux selection, selectable by just
-pressing ENTER at the yaboot prompt.  This entry will also be highlighted with a '*', if you
-press TAB to see the boot selections."),
-
-setupSILOAddEntry =>
- __("SILO is a bootloader for SPARC: it is able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful as to choose the correct parameters.
-
-
-You may also want not to give access to these other operating systems to
-anyone, in which case you can delete the corresponding entries. But
-in this case, you will need a boot disk in order to boot them!"),
-
-setupSILOGeneral =>
- __("SILO main options are:
-  - Bootloader installation: Indicate where you want to place the
-information required to boot to GNU/Linux. Unless you know exactly
-what you are doing, choose \"First sector of drive (MBR)\".
+Should it fail, you are anyway asked whether you have a SCSI card or not. Answer
+Yes to choose your card in a list or No if you have no SCSI hardware. If you are
+not sure you can also check the list of hardware in your machine by selecting
+See hardware info and clicking OK.
 
+If you have to manually specify your adapter, DrakX will ask if you want to
+specify options for it. You should allow DrakX to probe the hardware for the
+options. This usually works well.
 
-  - Delay before booting default image: Specifies the number in tenths
-of a second the boot loader should wait before booting the first image.
-This is useful on systems that immediately boot from the hard disk after
-enabling the keyboard. The boot loader doesn't wait if \"delay\" is
-omitted or is set to zero."),
+If not, you will need to provide options to the driver. Please review the User
+Guide (chapter 3, section \"Collective informations on your hardware\") for
+hints on retrieving this information from hardware documentation, from the
+manufacturer's Web site (if you have Internet access) or from Microsoft Windows
+(if you have it on your system)."),
 
-configureX =>
- __("Now it's time to configure the X Window System, which is the
-core of the GNU/Linux GUI (Graphical User Interface). For this purpose,
-you must configure your video card and monitor. Most of these
-steps are automated, though, therefore your work may only consist
-of verifying what has been done and accept the settings :)
+summary => 
+__("Here are presented various parameters related to your machine. Depending on your
+installed hardware you may or not, see the following entries:
 
+ * Mouse: mouse Check the current mouse configuration and click on the button to
+change it if necessary.
 
-When the configuration is over, X will be started (unless you
-ask DrakX not to) so that you can check and see if the
-settings suit you. If they don't, you can come back and
-change them, as many times as necessary."),
+ * Keyboard: keyboard Check the current keyboard map configuration and click on
+the button to change that if necessary.
 
-configureXmain =>
- __("If something is wrong in X configuration, use these options to correctly
-configure the X Window System."),
+ * Timezone: timezone DrakX, by default, guesses your timezone from the language
+you have chosen. But here again, as for the keyboard choice, you may not be in
+the country which the chosen language suggests, so you may need to click on the
+Timezone button so that you can configure the clock according to the time zone
+you are in.
 
-configureXxdm =>
- __("If you prefer to use a graphical login, select \"Yes\". Otherwise, select
-\"No\"."),
+ * Printer: Clicking on the No Printer button, will open the printer
+configuration wizard..
 
-miscellaneous =>
- __("You can choose a security level for your system. Please refer to the manual for complete
-  information. Basically, if you don't know what to choose, keep the default option.
-"),
+ * Sound card: If a sound card has been detected on your system, it is displayed
+here. No modification possible at installation time.
 
-exitInstall =>
- __("Your system is going to reboot.
+ * TV card: If a TV card has been detected on your system, it is displayed here.
+No modification possible at installation time.
 
-After rebooting, your new Mandrake Linux system will load automatically.
-If you want to boot into another existing operating system, please read
-the additional instructions."),
+ * ISDN card: If an ISDN card has been detected on your system, it is displayed
+here. You can click on the button to change the associated parameters."),
 );
-
-#-#- ################################################################################
-#-#- NO LONGER UP-TO-DATE...
-#-%steps_long = (
-#-selectLanguage =>
-#- __("Choose preferred language for install and system usage."),
-#-
-#-selectKeyboard =>
-#- __("Choose the layout corresponding to your keyboard from the list above"),
-#-
-#-selectPath =>
-#- __("Choose \"Installation\" if there are no previous versions of GNU/Linux
-#-installed, or if you wish to use multiple distributions or versions.
-#-
-#-
-#-Choose \"Update\" if you wish to update a previous version of Mandrake
-#-Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."),
-#-
-#-selectInstallClass =>
-#- __("Select:
-#-
-#-  - Beginner: If you have never installed GNU/Linux before, and wish to
-#-install the distribution elected \"Product of the year\" for 1999,
-#-click here.
-#-
-#-  - Developer: If you are familiar with GNU/Linux and will be using the
-#-computer primarily for software development, you will find happiness
-#-here.
-#-
-#-  - Server: If you wish to install a general purpose server, or the
-#-GNU/Linux distribution elected \"Distribution/Server\" for 1999, select
-#-this.
-#-
-#-  - Expert: If you are fluent with GNU/Linux and want to perform
-#-a highly customized installation, this Install Class is for you."),
-#-
-#-setupSCSI =>
-#- __("DrakX will attempt at first to look for one or more PCI
-#-SCSI adapter(s). If it finds it (or them)  and knows which driver(s)
-#-to use, it will insert it (them)  automatically.
-#-
-#-If your SCSI adapter is ISA, or is PCI but DrakX doesn't know
-#-which driver to use for this card, or if you have no SCSI adapters
-#-at all, you will then be prompted on whether you have one or not.
-#-If you have none, answer \"No\". If you have one or more, answer
-#-\"Yes\". A list of drivers will then pop up, from which you will
-#-have to select one.
-#-
-#-After you have selected the driver, DrakX will ask if you
-#-want to specify options for it. First, try and let the driver
-#-probe for the hardware: it usually works fine.
-#-
-#-If not, do not forget the information on your hardware that you
-#-could get from you documentation or from Windows (if you have
-#-it on your system), as suggested by the installation guide.
-#-These are the options you will need to provide to the driver."),
-#-
-#-partitionDisks =>
-#- __("In this stage, you may choose what partition(s) use to install your
-#-Mandrake Linux system."),
-#-
-#-#At this point, hard drive partitions must be defined. (Unless you
-#-#are overwriting a previous install of GNU/Linux and have already defined
-#-#your hard drive partitions as desired.) This operation consists of
-#-#logically dividing the computer's hard drive capacity into separate
-#-#areas for use.
-#-#
-#-#
-#-#Two common partition are: the root partition (/), which is the starting
-#-#point of the filesystem's directory hierarchy, and /boot, which contains
-#-#all files necessary to start the operating system when the
-#-#computer is first turned on.
-#-#
-#-#
-#-#Because the effects of this process are usually irreversible, partitioning
-#-#can be intimidating and stressful to the unexperienced. DiskDrake
-#-#simplifies the process so that it need not be. Consult the documentation
-#-#and take your time before proceeding."),
-#-
-#-formatPartitions =>
-#- __("Any partitions that have been newly defined must be formatted for
-#-use (formatting meaning creating a filesystem). At this time, you may
-#-wish to re-format some already existing partitions to erase the data
-#-they contain. Note: it is not necessary to re-format pre-existing
-#-partitions, particularly if they contain files or data you wish to keep.
-#-Typically retained are /home and /usr/local."),
-#-
-#-choosePackages =>
-#- __("You may now select the packages you wish to install.
-#-
-#-
-#-Please note that some packages require the installation of others.
-#-These are referred to as package dependencies. The packages you select,
-#-and the packages they require will be automatically selected for
-#-install. It is impossible to install a package without installing all
-#-of its dependencies.
-#-
-#-
-#-Information on each category and specific package is available in the
-#-area titled \"Info\",  located between list of packages and the five
-#-buttons \"Install\", \"Select more/less\" and \"Show more/less\"."),
-#-
-#-doInstallStep =>
-#- __("The packages selected are now being installed.
-#-
-#-
-#-This operation should take a few minutes."),
-#-
-#-selectMouse =>
-#- __("If DrakX failed to find your mouse, or if you want to
-#-check what it has done, you will be presented the list of mice
-#-above.
-#-
-#-
-#-If you agree with DrakX' settings, just jump to the section
-#-you want by clicking on it in the menu on the left. Otherwise,
-#-choose a mouse type in the menu which you think is the closest
-#-match for your mouse.
-#-
-#-In case of a serial mouse, you will also have to tell DrakX
-#-which serial port it is connected to."),
-#-
-#-configureNetwork =>
-#- __("This section is dedicated to configuring a local area network,
-#-or LAN. If you answer \"Yes\" here, DrakX will try to find an
-#-Ethernet adapter on your machine. PCI adapters should be found and
-#-initialized automatically. However, if your peripheral is ISA,
-#-autodetection will not work, and you will have to choose a driver
-#-from the list that will appear then.
-#-
-#-
-#-As for SCSI adapters, you can let the driver probe for the adapter
-#-in the first time, otherwise you will have to specify the options
-#-to the driver that you will have fetched from Windows' control
-#-panel.
-#-
-#-
-#-If you install a Mandrake Linux system on a machine which is part
-#-of an already existing network, the network administrator will
-#-have given you all necessary information (IP address, network
-#-submask or netmask for short, and hostname). If you're setting
-#-up a private network at home for example, you should choose
-#-addresses "),
-#-
-#-configureTimezone =>
-#- __("Help"),
-#-
-#-configureServices =>
-#- __("Help"),
-#-
-#-configurePrinter =>
-#- __("GNU/Linux can deal with many types of printer. Each of these
-#-types require a different setup.
-#-
-#-
-#-If your printer is directly connected to your computer, select
-#-\"Local printer\". You will then have to tell which port your
-#-printer is connected to, and select the appropriate filter.
-#-
-#-
-#-If you want to access a printer located on a remote Unix machine,
-#-you will have to select \"Remote lpd queue\". In order to make
-#-it work, no username or password is required, but you will need
-#-to know the name of the printing queue on this server.
-#-
-#-
-#-If you want to access a SMB printer (which means, a printer located
-#-on a remote Windows 9x/NT machine), you will have to specify its
-#-SMB name (which is not its TCP/IP name), and possibly its IP address,
-#-plus the username, workgroup and password required in order to
-#-access the printer, and of course the name of the printer.The same goes
-#-for a NetWare printer, except that you need no workgroup information."),
-#-
-#-setRootPassword =>
-#- __("You must now enter the root password for your Mandrake Linux
-#-system. The password must be entered twice to verify that both
-#-password entries are identical.
-#-
-#-
-#-Root is the administrator of the system, and is the only user
-#-allowed to modify the system configuration. Therefore, choose
-#-this password carefully! Unauthorized use of the root account can
-#-be extremely dangerous to the integrity of the system and its data,
-#-and other systems connected to it. The password should be a
-#-mixture of alphanumeric characters and a least 8 characters long. It
-#-should *never* be written down. Do not make the password too long or
-#-complicated, though: you must be able to remember without too much
-#-effort."),
-#-
-#-addUser =>
-#- __("You may now create one or more \"regular\" user account(s), as
-#-opposed to the \"privileged\" user account, root. You can create
-#-one or more account(s) for each person you want to allow to use
-#-the computer. Note that each user account will have its own
-#-preferences (graphical environment, program settings, etc.)
-#-and its own \"home directory\", in which these preferences are
-#-stored.
-#-
-#-
-#-First of all, create an account for yourself! Even if you will be the only user
-#-of the machine, you may NOT connect as root for daily use of the system: it's a
-#-very high security risk. Making the system unusable is very often a typo away.
-#-
-#-
-#-Therefore, you should connect to the system using the user account
-#-you will have created here, and login as root only for administration
-#-and maintenance purposes."),
-#-
-#-createBootdisk =>
-#- __("Please, please, answer \"Yes\" here! Just for example, when you
-#-reinstall Windows, it will overwrite the boot sector. Unless you have
-#-made the bootdisk as suggested, you won't be able to boot into GNU/Linux
-#-any more!"),
-#-
-#-setupBootloader =>
-#- __("You need to indicate where you wish
-#-to place the information required to boot to GNU/Linux.
-#-
-#-
-#-Unless you know exactly what you are doing, choose \"First sector of
-#-drive (MBR)\"."),
-#-
-#-configureX =>
-#- __("Now it's time to configure the X Window System, which is the
-#-core of the GNU/Linux GUI (Graphical User Interface). For this purpose,
-#-you must configure your video card and monitor. Most of these
-#-steps are automated, though, therefore your work may only consist
-#-of verifying what has been done and accept the settings :)
-#-
-#-
-#-When the configuration is over, X will be started (unless you
-#-ask DrakX not to) so that you can check and see if the
-#-settings suit you. If they don't, you can come back and
-#-change them, as many times as necessary."),
-#-
-#-exitInstall =>
-#- __("Help"),
-#-);
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
index 753d3c309..dd65c8ccb 100644
--- a/perl-install/share/po/Makefile
+++ b/perl-install/share/po/Makefile
@@ -12,6 +12,9 @@ LOCALEDIR=$(DATADIR)/locale
 
 all: $(MOFILES)
 
+help: /tmp/drakx-help.xml
+	./help_xml2pm.pl $^ > ../../help.pm
+
 %.mo: %.po
 	msgfmt -o $@ $<
 
diff --git a/perl-install/share/po/help_xml2pm.pl b/perl-install/share/po/help_xml2pm.pl
new file mode 100755
index 000000000..9996c13d6
--- /dev/null
+++ b/perl-install/share/po/help_xml2pm.pl
@@ -0,0 +1,127 @@
+#!/usr/bin/perl
+
+use XML::Parser;
+use MDK::Common;
+
+@ARGV == 1 or die "usage: help_xml2pm <drakx-help.xml>\n";
+
+my $p = new XML::Parser(Style => 'Tree');
+my $tree = $p->parsefile($ARGV[0]);
+my $help = {};
+
+# rewrite2 fills in $help
+rewrite2(rewrite1(@$tree));
+
+print 
+q{package help;
+use common;
+%steps = (
+empty => '',
+};
+print qq(
+$_ => 
+__("$help->{$_}"),
+) foreach sort keys %$help;
+print ");\n";
+
+
+# i don't like the default tree format given by XML::Parser,
+# rewrite it in my own tree format
+sub rewrite1 {
+    my ($tag, $tree) = @_;
+    my ($attr, @nodes) = @$tree;
+    my @l;
+    while (@nodes) {
+	my ($tag, $tree) = splice(@nodes, 0, 2);
+	if ($tag eq '0') {
+	    foreach ($tree) {
+		s/\s+/ /gs;
+		s/"/\\"/g;
+	    }
+	}
+	push @l, $tag eq '0' ? $tree : rewrite1($tag, $tree);
+    }
+    { attr => $attr, tag => $tag, children => \@l };
+}
+
+# return the list of nodes named $tag
+sub find {
+    my ($tag, $tree) = @_;
+    if (!ref($tree)) {
+	();
+    } elsif ($tree->{tag} eq $tag) {
+	$tree;
+    } else {
+	map { find($tag, $_) } @{$tree->{children}};
+    }
+}
+
+sub rewrite2 {
+    my ($tree) = @_;
+    ref($tree) or return $tree;
+
+    my $text = do {
+	my @l = map { rewrite2($_) } @{$tree->{children}};
+	my $text;
+	foreach (grep { !/^\s*$/ } @l) {
+	    s/^ // if $text =~ /\s$/;
+	    $text =~ s/ $// if /^\s/;
+	    $text =~ s/\n+$// if /^\n/;
+	    $text .= $_;
+	}
+	$text;
+    };
+
+    if (0) {
+    } elsif (member($tree->{tag}, 'para', 'itemizedlist', 'orderedlist')) {
+	$text =~ s/^\s(?!\s)//;
+	$text =~ s/^( ?\n)+//;
+	$text =~ s/\s+$//;
+	qq(\n$text\n);
+    } elsif ($tree->{tag} eq 'quote') {
+	qq(``$text'');
+    } elsif ($tree->{tag} eq 'command') {
+	qq(\\"$text\\");
+    } elsif ($tree->{tag} eq 'userinput') {
+	qq(>>$text<<);
+    } elsif ($tree->{tag} eq 'footnote') {
+	'(*)'
+    } elsif ($tree->{tag} eq 'warning') {
+	$text =~ s/^(\s+)/$1!! /;
+	$text =~ s/(\s+)$/ !!$1/;
+	$text;
+    } elsif ($tree->{tag} eq 'listitem') {
+	my $cnt;
+	$text =~ s/^\s+//;
+	$text =~ s/^/' ' . ($cnt++ ? '  ' : '* ')/emg;
+	"\n$text\n";
+
+    } elsif (member($tree->{tag}, 'guibutton', 'guimenu', 'guilabel',
+                    'emphasis', 'acronym', 'keycap', 'ulink', 'tip', 'note',
+		    'primary', 'indexterm',
+		   )) {
+	# ignored tags
+	$text;
+    } elsif (member($tree->{tag}, 'title', 'article')) {
+	# dropped tags
+	'';
+    } elsif ($tree->{tag} eq 'sect1') {
+	$text =~ s/^\s+//;
+
+	my @footnotes = map { 
+	    my $s = rewrite2({ %$_, tag => 'para' });
+	    $s =~ s/^\s+//;
+	    "(*) $s";
+	} find('footnote', $tree);
+	$help->{$tree->{attr}{id}} = aerate($text . join('', @footnotes));
+	'';
+    } else {
+	die "unknown tag $tree->{tag}\n";
+    }
+}
+
+sub aerate {
+    my ($s) = @_;
+    my $s2 = join("\n\n", map { join("\n", warp_text($_)) } split "\n", $s);
+    $s2;
+}